Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
282
283
284
285
286
287
288
289
290
291
292
293
294
300
310
320
330
340
350
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 2-Ethoxyethanol (Ethylene Glycol Monoethyl Ether) | |
| A serial representation of the Audio Definition Model | |
| Advanced sound system for programme production | |
| Allocation and ordering of audio channels to formats containing 12-, 16- and 32-tracks of audio | |
| Aluminium conductors for overhead power transmission purposes | |
| Aluminium nickel iron bronze rods, and forgings, for general engineering purposes | |
| Applying benefits management on portfolios, programmes and projects \x96 Guide | |
| Audio definition model and serial representation of audio definition model profile for advanced sound systems emission | |
| Audio Definition Model renderer for advanced sound systems | |
| Audio Definition Model | |
| Audio system for the production and international exchange of 3DTV programmes for broadcasting | |
| Autoclaves for Sterilization in Laboratories - Part 1: Specification for Design, Construction, Safety and Performance | |
| Autoclaves for sterilization in laboratories - Part 2: Guide to planning and installation | |
| Autoclaves for Sterilization in Laboratories - Part 3: Guide to Safe Use and Operation | |
| Autoclaves for Sterilization in Laboratories - Part 4: Guide to Maintenance | |
| Autoclaves for Sterilization in Laboratories - Part 5: Methods of Test for Function and Performance | |
| Barometer Conventions and Tables, Their Application and Use | |
| Bars & Sections Suitable for Forgings and Drop Forgings | |
| Boiling Flasks (Narrow-Necked), Conical, Flat Bottom and Round Bottom | |
| British Standard Specification for Brass Bars (High Speed Screwing and Turning) | |
| British Standard Specification Steel Billets, Blooms, Bars and Forgings Railway Rolling Stock Material | |
| British Standard Specifications for Railway Rolling Stock Material | |
| Business continuity management - Part 1: Code of Practice | |
| Business continuity management - Part 2: Specification | |
| Cable sealing boxes for oil immersed transformers. Boxes for voltages up to and including 11 kV | |
| Calibration Blocks for Use in Ultrasonic Flaw Detection | |
| Cast Iron Flanged Pipes and Flanged Fittings | |
| Class 1 Arc Welding of Ferritic Steel Pipework for Carrying Fluids | |
| Class II Oxy-Acetylene Welding of Carbon Steel Pipework for Carrying Fluids | |
| Classification of insulating materials for electrical machinery and apparatus on the basis of thermal stability in service | |
| Closets for Use with Chemicals Part 1: Portable and Transportable Types | |
| Closets for Use with Chemicals Part 2: Permanent Installations | |
| Code for disappearing-filamen t optical pyrometers | |
| Code of Practice for Textile Care Labelling | |
| Colliery haulage and winding equipment - Part 2: Specification for wrought steel | |
| Commercial Refrigerated Storage Cabinets of the Closed Reach-In Type | |
| Common definitions for the audio definition model | |
| CONTOURS FOR LOCOMOTIVE TYRES | |
| Control Chart Technique When Manufacturing to a Specification, with Special Reference to Articles Machined to Dimensional Tolerances | |
| Copper and copper alloy capillary and compression tube fittings (for use with fractional O.D.sixes of tubes) for engineering purposes | |
| Copper and Copper- Cadmium Stranded Conductors for Overhead Electric Traction Systems | |
| Copper and Copper-Cadmium Trolley and Contact Wire for Electric Traction | |
| Definitions for use in mechanical engineering Definitions relating to construction, drawing practice, size and tolerance, limits and fits screw threads, surface texture and gauges | |
| Determination of Power-factor and permittivity of insulating materials - (Hartshorn & ward method) | |
| Determination of Resistivity of Conductive and Antistatic Plastics and Rubbers (Laboratory Methods) | |
| Determination of Water Absorptiveness of Paper and Board (Cobb Method) | |
| Diagnostic Rubber Fingerstalls | |
| Diamond Abrasive Products Part 1: Diamond Abrasive Grinding Wheels | |
| Diamond Abrasive Products Part 2: Diamond Abrasive Circular Saws and Frame Saws | |
| Diamond Abrasive Products Part 3: Dimensions of Steel Blades for Segmented Saws for Cutting of Stone and Masonry | |
| Drafting Specifications Based on Limiting the Number of Defectives Permitted in Small Samples | |
| Drawing Conventions for Laboratory Glass Apparatus | |
| Elastomeric Joint Rings for Pipework and Pipelines | |
| Electric lifts. General requirements | |
| Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers) | |
| Electronic Equipment for Industrial Machines Part 1: General Requirements | |
| Fastening threads of BSP. sizes (formerly BS 84:1940) | |
| Fixed Capacitors for Direct Current Using Impregnated Paper or Paper/Plastics Film Dielectric | |
| Flattened strand steel wire ropes for colliery winding purposes | |
| Fuses for Voltages Exceeding 1000 V a.c. Part 3: Guide to the Determination of Short Circuit Power Factor | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 2: Qualification criteria for enterprises and personnel | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party | |
| Glass Plant, Pipeline and Fittings - Part 3: Specification for Pipeline and Fittings of Nominal Bore 15 to 150 mm: Compatibility and Interchangeability | |
| Glass plant, pipeline and fittings - Part 4: Specification for glass plant components | |
| Glass Plant, Pipeline and Fittings Part 1: Specification for Properties of Borosilicate Glass 3.3 | |
| Glass Plant, Pipeline and Fittings Part 2: Specification for Testing, Handling and Use | |
| Glossary for Gears Part 1: Geometrical Definitions | |
| Glossary for Gears Part 2: Notation | |
| Glossary of Leather terms | |
| Glossary of Terms and Classification Relating to Agricultural Machinery and Implements - Part 1: Power and Tractive Units | |
| Glossary of Terms and Classification Relating to Agricultural Machinery and Implements - Part 3: Soil Working Equipment | |
| Glossary of Terms Relating to Agricultural Machinery and Implements | |
| Glossary of terms relating to iron and steel. Bright steel bar and steel wire | |
| Glossary of terms relating to iron and steel. Forgings and drop forgings | |
| Glossary of terms relating to iron and steel. General metallurgical, heat treatment and testing terms | |
| Glossary of terms relating to iron and steel. Hot rolled steel products (excluding sheet, strip and tubes) | |
| Glossary of terms relating to iron and steel. Iron and steel founding | |
| Glossary of terms relating to iron and steel. Steel sheet and strip | |
| Glossary of terms relating to iron and steel. Steel tubes and pipes | |
| Glossary of terms relating to iron and steel. Steelmaking | |
| Glossary of terms relating to iron and steel. Wrought iron | |
| Glossary of terms used in industrial high-frequency induction and dielectric heating | |
| Glossary of terms Used in Radiology | |
| Granular Desiccant Silica Gel | |
| H-Section Steel Arches for Use in Mines | |
| Hand and Breast Drills | |
| Hand-held electric motor-operated tools - Part 1: Specification for general requirements | |
| Hand-held electric motor-operated tools - Part 2: Particular requirements - Section 2.0 General introduction and list of Sections | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.13: Specification for Planers | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.14: Specification for Hedge Trimmers and Scissor- Type Grass Shears | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.15: Specification for Routers | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.16: Specification for Trimmers | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.1: Drills | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.3: Specification for Grinders, Polishers and Disc-Type Sanders | |
| Hand-Held Electric Motor-Operated Tools Part 2: Particular Requirements Section 2.4: Specification for Sanders | |
| Hand-held electric motor-operated tools. Particular requirements. Specification for chain saws | |
| Hand-held electric motor-operated tools. Particular requirements. Specification for circular saws and circular knives | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.10: Jig Saws | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.11: Concrete Vibrators | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.2: Screwdrivers and Impact Wrenches | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.6: Hammers | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.7: Spray Guns | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.8: Sheet Metal Shears and Nibblers | |
| Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.9: Tappers | |
| Hard drawn aluminium and steel cored aluminium conductors for overhead power transmission purposes | |
| High tensile brass bars and sections (grades A and B) | |
| High-voltage bushings | |
| Hose Couplings for Petrol Oil and Lubricants (3/4 in. to 4 in. Nominal Sizes) | |
| Hose Couplings for Petrol, Oil and Lubricants - Part 4: 100 mm Quick-Acting Couplings: European Type | |
| Hot-Applied Joint Sealant Systems for Concrete Pavements Part 1: Specification for Joint Sealants | |
| Hot-Applied Joint Sealant Systems for Concrete Pavements Part 2: Code of Practice for the Application and Use of Joint Sealants | |
| Hot-Applied Joint Sealant Systems for Concrete Pavements Part 3: Methods of Test | |
| Information and communications technology continuity management - Code of practice | |
| Information and communications technology continuity management. Code of practice | |
| Loaded and Unloaded Ebonite for Electrical Purposes | |
| Long-form file format for the international exchange of audio programme materials with metadata | |
| Lower limb orthoses - Part 1: Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses | |
| Lower Limb Orthoses Part 2: Specification for Metal Knee Joints | |
| Lower limb orthoses. Part 3: Method for the determination of mechanical properties of metal knee joint and side member assemblies | |
| Lunge Nitrometers | |
| Maximum transmitter powers for broadcasting in the Tropical Zone | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 1: Recommendations for Laboratories | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 3: Laboratory Measurements of Airborne Sound Insulation of Building Elements | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 4: Field Measurements of Airborne Sound Insulation Between Rooms | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 5: Field Measurements of Airborne Sound Insulation of Facade Elements and Facades | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 6: Laboratory Measurements of Impact Sound Insulation of Floors | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 7: Field Measurements of Impact Sound Insulation of Floors | |
| Measurement of Sound Insulation in Buildings and of Building Elements Part 8: Laboratory Measurements of the Reduction of Transmitted Impact Noise by Floor Coverings on a Standard Floor | |
| Memorandum - Construction of Electrical Equipment for Protection Against Electric Shock | |
| Method for Brinell Hardness Test and for Verification of Brinell Hardness Testing Machines | |
| Method for Brinell hardness test. Testing of metals | |
| Method for Brinell hardness test. Verification of the testing machine | |
| Method for Determination of Breaking Strength and Elongation (Strip Method) of Woven Fabrics | |
| Method for Determination of Knock Characteristics of Motor and Aviation-Type Fuels (Motor Method) | |
| Method for Determination of Knock Characteristics of Motor Fuels (Research Method) | |
| Method for the Determination of Wool Fiber Fineness by the Use of a Projection Microscope | |
| Method for the subjective quality assessment of audible differences of sound systems using multiple stimuli without a given reference | |
| Method of test for determination of twist in yarns, direct counting method | |
| Method of Test for the Determination of the Cuprammonium Fluidity of Cotton and Certain Cellulosic Man-Made Fibres | |
| Method of Testing Oil-Fired Rotary Dryers for Use in Asphalt and Coated Macadam Plant | |
| Methods for Analysis of glass - Part 1: Glasses of the soda-lime-magnesia-s ilica type | |
| Methods for Analysis of glass - Part 3: Glasses of the potassium oxide-lead oxide-silica type | |
| Methods for Chemical Analysis of Ice Cream Part 3: Determination of Fat Content | |
| Methods for Determination of Thickness of Textile Materials | |
| Methods for the analysis of glass. Recommended procedure for the analysis of soda-boric oxide-alumina-silica glasses of high silica and boric oxide content | |
| Methods for The Chemical Analysis of Ice Cream | |
| Methods for the Determination of water \x97 (Karl fischer method) | |
|
Methods for the subjective assessment of sound systems with accompanying picture -- BS.2126-0 FRENCH
|
Methods for the subjective assessment of sound systems with accompanying picture |
| Methods of Fibre Sampling for Testing | |
| Methods of Measurement of Sound Insulation in Buildings and of Building Elements Part 2: Statement of Precision Requirements | |
| Methods of Sampling and Examining Deposits from Boilers and Associated Industrial Plant - Part 1: Water-Side Deposits | |
| Methods of Sampling and Examining Deposits from Boilers and Associated Industrial Plant Part 2: Methods for Sampling and Examining Free-Side Deposits | |
| Methods of test for essential oils | |
| Methods of Test for Textiles. Woven Fabrics. Determination of Mass per Unit Length and Mass per Unit Area | |
| Methods of testing Plastics - Part 10: Glass reinforced plastics - Method 1006: Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric | |
| Methods of Testing Plastics - Part 11: Thermoplastic Pipes, Fittings and Valves - Method 1112A: Leaktightness of Thermoplastics Pipes and Fittings for Non-Pressure Applications | |
| Methods of testing Plastics - Part 11: Thermoplastics pipes, fittings and valves - Method 1108A: True impact rate (TIR) boundaries of pipes | |
| Methods of testing Plastics - Part 11: Thermoplastics pipes, fittings and valves - Method 1109A: Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications | |
| Methods of Testing Plastics Part 0: Introduction | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1001: Measurement of Hardness by Means of a Barcol Impressor | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1002: Determination of Loss on Ignition | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1003: Determination of Tensile Properties | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1004: Standard Atmospheres for Conditioning and Testing | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1005: Determination of Flexural Properties. Three Point Method | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1008A: General Considerations and Preparation of Rods for Determination of Mechanical Properties on Rods Made from Roving- Reinforced Resins | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1008B: Determination of Flexural Strength on Rods Made of Roving- Reinforced Resin | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1008C: Determination of Compressive Strength on Rods Made from Roving- Reinforced Resins | |
| Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1008D: Determination of Apparent Interlaminar Shear Strength on Rods Made of Roving- Reinforced Resins | |
| Methods of Testing Plastics Part 11. Thermoplastic Pipes, Fittings and Valves Method 1102A. Longitudinal Reversion of Pipes: Immersion Bath Method | |
| Methods of Testing Plastics Part 11. Thermoplastic Pipes, Fittings and Valves Method 1102B. Longitudinal Reversion of Pipes: Oven Method | |
| Methods of Testing Plastics Part 11. Thermoplastic Pipes, Fittings and Valves Method 1103A. Stress Relief Test for Injection Moulded Fittings: Oven Method | |
| Methods of Testing Plastics Part 11. Thermoplastic Pipes, Fittings and Valves Method 1104A. Measurement of Opacity of Thermoplastice Pipes and Fittings | |
| Methods of Testing Plastics Part 11. Thermoplastic Pipes, Fittings and Valves Method 1106A. Assessment of Pigment Dispersion in Polyolefin Pipes and Fittings: Microtome Method | |
| Methods of Testing Plastics Part 11: Pipes, Fittings and Valves Method 1121B: Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Metric Series | |
| Methods of Testing Plastics Part 11: Thermoplastic Pipes, Fittings and Valves Method 1101A: Measurement of Dimensions of Pipes | |
| Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1110: Tensile Properties of Dumb-Bell Specimens from PVC Gutter Profiles or Pipes for Non-Pressure Applications | |
| Methods of Testing Plastics Part 11: Thermoplastics Pipes, Fittings and Valves Method 1121C: Thermoplastics Pipes for the Conveyance of Fluids - Nominal Outside Diameters and Nominal Pressures - Inch-Based Series... | |
| Methods of testing plastics. Thermoplastics pipes, fittings and valves. Method of test for the change in mass of unplasticized polyvinyl chloride pipes and fittings on immersion in sulphuric acid | |
| Methods of Testing Plastics | |
| Methods of testing Water Used in Industry - Part 102: Hydrazine: Spectrophotometric Method (4-Dimethylaminobenz aldehyde) | |
| Methods of testing Water Used in Industry - Part 104: Silica: Reactive, Total and Suspended | |
| Methods of testing Water Used in Industry - Part 115: Cyclohexylamine: Spectrophotometric Method | |
| Methods of testing Water used in industry - Part 116: Morpholine: spectrophotometric method | |
| Methods of testing Water Used in Industry - Part 117: Long-Chain Fatty Amines: Spectrophotometric Method | |
| Methods of testing Water Used in Industry - Part 15: Free EDTA, Total Salts of EDTA, Polyacrylate and Polymethacrylate | |
| Methods of testing Water Used in Industry Part 101: Dissolved Oxygen | |
| Methods of testing Water Used in Industry Part 6: Chloride and Sulphate | |
| Methods of testing water used in industry. Arsenic, lead and sulphide | |
| Methods of testing water used in industry. Dichromate value (chemical oxygen demand), non-volatile organic carbon, tannins and chlorine | |
| Methods of testing water used in industry. Dissolved oxygen, hydrazine and sulphite | |
| Methods of testing water used in industry. Nickel, zinc, chromates and total chromium and manganese | |
| Methods of testing water used in industry. Soluble phosphate and organophosphorus compounds | |
| Methods of Water Used in Industry Part 7: Nitrite, Nitrate and Ammonia (Free, Saline and Albuminoid) | |
| Methylene Blue Particulate Test for Respirator Canisters | |
| Miniature smoke chart | |
| Naval brass (admiralty mixture) bars and sections (suitable for machining and forcing) and forgings | |
| Notch ductile steel for general structural purposes | |
| Octave and One Third Octave Band-Pass Filters | |
| Oil switches for alternating current systems | |
| Organizational responses to modern slavery - Guidance | |
| Pallets for Materials Handling for Through Transit - Part 1: Specification for Principal Dimensions and Tolerances | |
| Pallets for Materials Handling for Through Transit Part 2: Pallets for Use in Freight Containers | |
| Pallets for Materials Handling for Through Transit Part 3: Performance Requirements and Methods of Test | |
| Performance Requirements for Electrically-Heated Laboratory Drying Ovens | |
| Phenolic Laminated Sheet | |
| Portable Aluminium Ladders, Steps, Trestles and Lightweight Stagings | |
| Portable Sanitary Pans for Use in Healthcare Establishments - Part 1: Specification for Reusable Bed Pans | |
| Portable Sanitary Pans for Use in Healthcare Establishments - Part 2: Specification for Reusable Pans for Commode Chairs | |
| Powder Metallurgical Products (P.M. Products) Part 1: Sintered Metal Components for General Engineering Purposes | |
| Preferred Numbers | |
| Preservative Treatments for Textiles Part 1: Specification for Treatments | |
| Preservative Treatments for Textiles Part 2: Methods of Test | |
| Project controls \x97 Specification | |
| Protection Ratio for Sound Broadcasting in the Tropical Zone | |
| Protective Clothing for Welders | |
| Radio-Frequency Cables - Part 1: General Requirements and Tests - Part 2: British Government Services Requirements | |
| Radiographic Examination of Fusion Welded Butt Joints in Steel Part 1: Methods for Steel 2 mm up to and Including 50 mm Thick | |
| Radiographic Examination of Fusion Welded Butt Joints in Steel Part 2: Methods for steel Over 50 mm up to and Including 200 mm Thick | |
| Railway rolling stock material. Copper plates, rods and tubes, and brass tubes | |
| Railway rolling stock material. Specification for laminated springs and spring steels | |
| Recommendations for Names for Chemicals Used in Industry | |
| Recommendations for the Construction of Simple Smoke Viewers | |
| Recommendations for Treatment of Water for Land Boilers | |
| Red Lead for Paints and Jointing Compounds | |
| Reference Zero for the Calibration of Pure-Tone Audiometers Part 5: Standard Reference Zero Using an Acoustic Coupler Complying with BS 4668 | |
| Reference Zero for the Calibration of Pure-Tone Audiometers Part 6: Standard Reference Zero Using an Artificial Ear Complying with BS 4669 | |
| Reinforcement Fibres - Sampling Plans Applicable to Received Batches | |
| Respirators for Protection Against Harmful Dust, Gases and Schedule Agricultural Chemicals | |
| Ringelmann chart | |
| Roughness Comparison Specimens Part 1: Turned, Ground, Bored, Milled, Shaped and Planed Specimens | |
| Roughness Comparison Specimens Part 2: Spark Eroded, Shot Blasted and Grit Blasted and Polished Specimens | |
| Roughness Comparison Specimens Part 3: Cast Surfaces | |
| Round Tins for Lubricating Greases | |
| Rules for the Design of Cranes - Part 2: Specification for classification, stress calculations and design of mechanisms | |
| Safeguarding for organizations \x96 Guide | |
| Schedule of Preferred Numbers for the Resistance of Resistors and the Capacitance of Capacitors for Telecommunication Equipment | |
| Screwed Studs Part 1: General Purpose Studs | |
| Short Pitch Transmission Precision Roller Chains and Chain Wheels | |
| Sistemas de sonido avanzados para la producci\xf3n de programas | |
| Soft Solders | |
| Specification Dimensions of rivets - (\xbd Inch to 1\xbe inch diameter) - This specification does not apply to boiler rivets | |
| Specification for a reference zero for the calibration of pure-tone audiometers. Data for a wide-band artificial ear complying with BS 4669 | |
| Specification for a reference zero for the calibration of pure-tone audiometers. Data for certain earphones used in commercial practice | |
| Specification for a reference zero for the calibration of pure-tone audiometers. Data for earphone coupler combinations maintained at certain standardizing laboratories | |
| Specification for a reference zero for the calibration of pure-tone audiometers. Normal threshold of hearing for pure tones by bone conduction | |
| Specification for Acetic Anhydride | |
| Specification for Activated Alumina for Use as Desiccant | |
| Specification for Air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems | |
| Specification for Augers and Auger Bits | |
| Specification for basic dimensions of cones and tubes for winding textile yarns Part 10. Cones for cross-wound winding: values of half angles, lengths and large inner diameters | |
| Specification for basic dimensions of cones and tubes for winding textile yarns Part 6. Transfer cones. Half angle of the cone 4 Degrees 20' | |
| Specification for basic dimensions of cones and tubes for winding textile yarns Part 7. Perforated cylindrical tubes for cheese dyeing | |
| Specification for basic dimensions of cones and tubes for winding textile yarns Part 8. Inner diameters and lengths of cylindrical tubes | |
| Specification for basic dimensions of cones and tubes for winding textile yarns. Part 9: Tubes for open-end spinning machines | |
| Specification for Bed Pan and Urine Bottle Washers | |
| Specification for Bed Pans of Perfection Type (Adult Size) | |
| Specification for black and white disinfectant fluids | |
| Specification for business continuity management | |
| Specification for Cable boxes for transformers and reactors | |
| Specification for cable covers (concrete and earthenware) | |
| Specification for capacitors for radio interference suppression | |
| Specification for Carbon Steel Welded Horizontal Cylindrical Storage Tanks | |
| Specification for Castors for Hospital Equipment | |
| Specification for castors. Castors for hospital equipment for ward and theatre use | |
| Specification for Chains and Chain Wheels for Slat Conveyors | |
| Specification for Chilled Iron Shot and Grit | |
| Specification for chlorobenzene | |
| Specification for cold rolled brass sheet, strip and foil - common brass | |
| Specification for Containers and notes for filmstrips | |
| Specification for denture base resin | |
| Specification for Dimensions of fractional horse-power motors - Part 1: Dimensions of motors for general use | |
| Specification For Dimensions of Temperature Detecting Elements and Corresponding Pockets | |
| Specification for Drums for covered winding wires and strips for electrical purposes | |
| Specification for Electric traction equipment | |
| Specification for Electrical resistance of conducting and antistatic products made from flexible polymeric material | |
| Specification for ethanediol (ethylene glycol) | |
| Specification for Exit Signs (Internally Illuminated) | |
| Specification for face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of flanged and butt-welding end steel valves for the petroleum, petrochemical and allied industries | |
| Specification for firemen's leather boots | |
| Specification for fixed metallized-paper dielectric capacitors for direct current | |
| Specification for Flameproof Enclosure of Electrical Apparatus | |
| Specification for Flexible PVC Compounds | |
| Specification for floats (plastics) for ballvalves for hot and cold water | |
| Specification for Fluoroboric acid and metal fluoroborates for electroplating | |
| Specification for Fuses for Voltages Exceeding 1000 V a.c. - Part 2: Expulsion Fuses | |
| Specification for Gas cylinder trolleys | |
| Specification for Gas Sampling Tubes | |
| Specification for Gas Washing Bottles | |
| Specification for Gear Hobs - Part 1: Hobs for General Purposes, 1 d.p. tp 20 d.p. Inclusive | |
| Specification for Gear Hobs - Part 2: Hobs for Gears for Turbine Reduction and Similar Drives | |
| Specification for gears for electric traction | |
| Specification for General Purpose Acrylonitrile - Butadiene Rubber Compounds | |
| Specification for Glass and Reference Electrodes for the Measurement of pH | |
| Specification for Hexagon Socket Screws and Wrench Keys - Inch Series | |
| Specification for Hook Spanners, Peg Spanners, Coupling Wrenches and the Related Slots, Holes and Horns | |
| Specification for Hose couplings for petrol, oil and lubricants - Part 2: High pressure couplings | |
| Specification for Hose couplings for petrol, oil and lubricants - Part 3: Quick-acting couplings | |
| Specification for Hot Applied Joint Sealants for Concrete Pavements | |
| Specification for industrial eye-protectors | |
| Specification for Iodine Flasks | |
| Specification for iron and steel for colliery cage suspension gear, tub & mine car drawgear and couplings and rope sockets. 1.5 per cent manganese steel castings for mine car couplers... | |
| Specification for Kerosine (paraffin) lighting appliances for domestic use | |
| Specification for lead-acid traction batteries for battery electric vehicles and trucks | |
| Specification for Lead-based priming paints | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 10: General requirements for guarding | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 5: General requirements for paternosters | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 6: Building construction requirements | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 7: Testing and inspection | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 8: Modernization or reconstruction of lifts, escalators and paternosters | |
| Specification for Lifts, escalators, passenger conveyors and paternosters - Part 9: Definitions | |
| Specification for lifts, escalators, passenger conveyors and paternosters Part 4. General requirements for escalators and passenger conveyors | |
| Specification for lifts, escalators, passenger conveyors and paternosters. Single-speed polyphase induction motors for driving lifts | |
| Specification for Light Rails and Fishplates for Use in Mines | |
| Specification for linen/cotton union tapes | |
| Specification for low alloy steel electrodes for manual metal-arc welding | |
| Specification for Lubricants for Refrigerant Compressors | |
| Specification for Lunge-Rey Weighing Pipette | |
| Specification for Mains-Operated Electric Fence Controllers | |
| Specification for Manufacture of Sectional Cold Rooms (Walk-In Type) | |
| Specification for maternity cribs (canvas) on tubular metal frames for use in hospitals | |
| Specification for Mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes | |
| Specification for Overbed Tables | |
| Specification for Permissible Stresses in Cranes Part 1. Structures | |
| Specification for Pictorial Marking of Handling Instructions for Goods in Transit | |
| Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads | |
| Specification for pitch-impregnated fibre pipes and fittings for below and above ground drainage | |
| Specification for Podger Spanners | |
| Specification for preferred sizes of casting pit refractories | |
| Specification for Pressboard for electrical purposes | |
| Specification for Protective Helmets for Vehicle Users (High Protection) | |
| Specification for Protractors for drawing office use | |
| Specification for quartz oscillator crystal units. General requirements and methods of test | |
| Specification for quartz oscillator crystal units. Guide to the use of quartz oscillator crystals | |
| Specification for Rack type gear cutters, metric module | |
| Specification for Radio-Frequency Cables Part 3: Cable Data Sheets | |
| Specification for Railway Track Spanners | |
| Specification for Rees-Hugill Powder Density Flask | |
| Specification for reflex reflectors for vehicles, including cycles | |
| Specification for Resistance projection welding of uncoated low carbon steel sheet and strip using embossed projections | |
| Specification for ropes made from manila, sisal, hemp, cotton and coir | |
| Specification for Rotary drill rods and tungsten carbide tipped rotary drill bits | |
| Specification for Rotary form relieved gear cutters - Part 2: Metric module | |
| Specification for Rotary form-relieved gear cutters - Part 1: Diametral pitch | |
| Specification for Rubber stoppers and tubing for general laboratory use | |
| Specification for Screwdrivers - Part 1: Screwdrivers for Slotted Head Screws | |
| Specification for Screwdrivers - Part 2: Screwdrivers and Screwdriver Bits for Recessed Head Screws | |
| Specification for Screwdrivers - Part 4: Ratchet Screwdrivers | |
| Specification for Screwdrivers - Part 5: Spiral Ratchet Screwdrivers | |
| Specification for Screwdrivers \x97 Part 3: Insulated Screwdrivers | |
| Specification for Screwdrivers and Screwdriver Accessories | |
| Specification for Screwed studs - Part 2: Recommendations for high grade studs | |
| Specification for Separating and Dropping Funnels for Laboratory Use | |
| Specification for Set squares (fixed and adjustable) for drawing office use | |
| Specification for Simple Smoke Alarms and Alarm Metering Devices | |
| Specification for Sizes of film for dental radiography | |
| Specification for Soxhlet extractors | |
| Specification for Spherical Ground Joints | |
| Specification for Sphygmomanometers Mercury Type | |
| Specification for sphygmomanometers. Aneroid type | |
| Specification for Sprayed Metal Coatings - Part 1: Protection of Iron and Steel by Aluminium and Zinc Against Atmospheric Corrosion | |
| Specification for Sprayed Metal Coatings - Part 2: Protection of Iron and Steel Against Corrosion and Oxidation at Elevated Temperatures | |
| Specification for stainless steel wire for mechanical springs | |
| Specification for Steel Wire for Spokes | |
| Specification for Straight-sided splines and serrations | |
| Specification for tail lights for vehicles, including cycles | |
| Specification for tee slots, tee bolts, tee nuts and tenons | |
| Specification for textile machinery and accessories - spinning and doubling rings - dimensions Part 3: Rings for spinning, doubling and twisting for ear-shaped travellers | |
| Specification for textile machinery and accessories - spinning and doubling rings - dimensions. Part 2: Rings for ring-spinning and ring-doubling frames for 'C' and 'EL' travellers | |
| Specification for textile machinery and accessories: weft pirns for automatic looms | |
| Specification for the presentation of serial publications, including periodicals | |
| Specification for thick PVC sheeting (calendered, flexible, unsupported) | |
| Specification for Tickings for Use by Hospitals and Local Authorities | |
| Specification for tolerances for mouldings in thermosetting materials | |
| Specification for Tubular Box Spanners - Supplement 1: Metric Sizes | |
| Specification for Underground plug cocks for cold water services | |
| Specification for valves and unions for hot water radiators | |
| Specification for Vertical Steel Welded Storage Tanks with Butt-welded Shells for the Petroleum Industry - Part 3: Higher Design Stresses | |
| Specification for vertical steel welded storage tanks with butt-welded shells for the petroleum industry | |
| Specification for Vulcanized Butadiene Acrylonitrile Rubbers | |
| Specification for vulcanized chloroprene rubber compounds | |
| SPECIFICATION FOR VULCANIZED FIBRE SHEET FOR ELECTRICAL. PURPOSES | |
| Specification for white pigments for paints | |
| Specification for Wood Wool for General Packaging Purposes | |
| Specification for Wrought aluminium - For electrical purposes - Wire | |
| Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak | |
| Specification for Zinc anodes, zinc oxide and zinc salts for electroplating | |
| Specification High pedestal or portal jib cranes | |
| Specification Phosphor bronze spring washers for general engineering purposes | |
| Specification. An artificial ear for the calibration of earphones of the external type | |
| Specification. Fuses for voltages exceeding 1000 V a.c. Current-limiting fuses | |
| Specifications for Glycerol | |
| Specifications for linseed oil | |
| Specifications for Steel plates for fire boxes of locomotive boilers | |
| Spectacle lenses - Part 3: Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses | |
| Spectacle Lenses Part 1: Specification for Tolerances on Optical Properties of Mounted Spectacle Lenses | |
| Spectacle Lenses Part 2: Specification for Tolerances on Optical Properties of Uncut Finished Lenses | |
| Spectacle Lenses Part 3: Specification for the Presentation of Prescriptions and Prescription Orders for Ophthalmic Lenses | |
| Spectacle Lenses Part 4: Specification for Single-Vision and Multifocal Semi-Finished Lens Blanks | |
| Spectacle Lenses Part 5: Specification for Progressive Power Semi-Finished Lens Blanks | |
| Square Nut Spanners (Post Office Type) | |
| Standardization management system \x97 Specification | |
| Steel cored aluminium conductors for overhead power transmission purposes | |
| Steel for Die Blocks for Drop Forging | |
| Steel Non-Powered Roller Conveyors | |
| Steel wire for prestressed concrete | |
| Steel Wire for Ropes | |
| Summary Sheets: 1: Straight-Sided Splines Bottom Fitting Shallow (Extracted from BS 2059: 1953) | |
| Summary Sheets: 2: Straight-Sided Spines. Bottom Fitting Deep (Extracted from BS 2059: 1953) | |
| Summary Sheets: 3: Straight-Sided Serrations. Internal and External (Extracted from BS 2059: 1953) | |
| Sun Glare Eye Protectors for General Use | |
| Synchronization of digital audio sample clock to video references | |
| Syst\xe8me sonore \xe9volu\xe9 pour la production de programmes | |
| Terminology of Internal Defects in Castings as Revealed by Radiography | |
| Textile Machinery and Accessories - Cylindrical Sliver Cans Part 1: Specification for Dimensions | |
| Textile machinery and accessories - cylindrical sliver cans. Part 2: Specification for packaging sliver cans (press cans) | |
| The Electrical Performance of Rotating Electrical Machinery | |
| The normal threshold of hearing for pure tones by earphone listening | |
| Thermoplastic Flooring Tiles | |
| Thermosetting synthetic-resin bonded-paper insulating sheets for use at radio frequencies | |
| Tickings for Domestic Bedding (Including Border Fabrics) | |
| Timber Scaffold Boards | |
| Tracked Changes (Redline) - Autoclaves for sterilization in laboratories - Part 2: Planning and installation - Code of practice | |
| Transfusion Equipment for Medical Use Part 1: Collapsible Containers for Blood and Blood Components | |
| Transfusion Equipment for Medical Use Part 2: Specification for Administration Sets | |
| Transport method for non-Pulse-Code Modulation audio signals and data over digital audio interfaces for programme production and exchange | |
| Tube and Pipe Fittings for Engineering Purposes Part 2: Specification for Olive Type Copper Alloy Compression Tube Fittings | |
| Tubular Box Spanners | |
| Typewriters Part 2: Specification for Function Key Symbols | |
| Typewriters Part 3: Specification for Layout of Printing and Function Keys | |
| Typewriters Part 4: Glossary of Terms | |
| Typewriters. Part 1: Specification for keyboard arrangements | |
| Tyres Railway Rolling Stock Material | |
| Use of International Radio for Disaster Relief (IRDR) frequencies for emergency broadcasts in the High Frequency (HF) bands | |
| Use of International Radio for Disaster Relief frequencies for emergency broadcasts in the High Frequency bands | |
| Use of the Ringelmann and Miniature Smoke Charts | |
| Vertical mild steel welded storage tanks with butt welded shels for petroleum industry. Design and fabrication | |
| Vertical mild steel welded storage tanks with butt welded shels for petroleum industry. Site erection inspection and testing | |
| Warp stop motions Part 1. Specification for dimensions of drop wires for mechanical and electrical warp stop motions | |
| Warp stop motions Part 2. Specification for dimensions of closed-end drop wires for mechanical and electrical warp stop motions and automatic drawing-in machines | |
| Washer-Disinfectors for Medical Purposes Part 1: Specification for General Requirements | |
| Washer-Disinfectors for Medical Purposes Part 2: Specification for Human Waste Container Washer-Disinfectors | |
| Washer-Disinfectors for Medical Purposes Part 3: Specification for Washer-Disinfectors Except Those Used for Processing Human-Waste Containers and Laundry | |
| Water Used in Industry Part 100: Foreword, Scope and General Requirements | |
| Water Used in Industry Part 106: Reactive Aluminium: Spectrophotometric Method (Catechol Violet) | |
| Water Used in Industry Part 108: Fluoride: Spectrophotometric Method (Alizarin Fluorine Blue) | |
| Water Used in Industry Part 109: Alkalinity, Acidity, pH Value and Carbon Dioxide | |
| Water Used in Industry Part 119: Odour | |
| Water Used in Industry Part 11: Anionic, Cationic and Non-Ionic Detergents and Oil | |
| Water Used in Industry Part 120: Suspended Solids: gravimetric method (after filtration) | |
| Water Used in Industry Part 121: Dissolved Solids: gravimetric method (after evaporation) | |
| Water Used in Industry Part 123: Sodium | |
| Water Used in Industry Part 124: Potassium: Flame Photometric Method | |
| Water Used in Industry Part 125: Lithium: Flame Photometric Method | |
| Water Used in Industry Part 1: Copper and Iron | |
| Westergren Tubes and Support for the Measurement of Erythrocyte Sedimentation Rate | |
| Woven and Knitted Fabrics for Upholstery |
| << Prev | Next >> |