Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
281
282
283
284
285
286
287
288
289
290
291
292
293
300
310
320
330
340
350
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 4-Methylpentan-2-One (Methyl Isobutyl Ketone) | |
| Algorithms to measure audio programme loudness and true-peak audio level | |
| Aluminium Collapsible Tubes | |
| Basic environmental testing procedures - Part 2.1: Tests - Test Ca: Damp heat, steady state | |
| Basic environmental testing procedures - Part 2.1: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle) | |
| Basic Environmental Testing Procedures - Part 2.1: Tests - Test T. Soldering | |
| Basic environmental testing procedures Part 2.1 Tests Test Ec. Drop and topple, primarily for equipment-type specimens | |
| Basic environmental testing procedures Part 2.1 Tests Test Ed. Free fall | |
| Basic Environmental Testing Procedures Part 2.1 Tests Test Fd - Random vibration - wide band general requirements | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1B: Test B. Dry Heat | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1EE: Bounce | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1FDB: Random Vibration-Wide Band. Reproducibility Medium | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Ff: Vibration Time-History Method | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1GA: Acceleration, Steady State | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1KA: Tests Ka. Salt Mist | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1KD: Test Kd. Hydrogen Sulfide Test for Contacts and Connections | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1PZ: Flammability | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1SA: Test Sa. Simulated Solar Radiation at Ground Level | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1XA: Tests. Test XA and Guidance. Immersion in Cleaning Solvents | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AD: Test Z/AD. Composite Temperature/Humidity Cyclic Test | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AM: Test Z/AM. Combined Cold/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AMD: Test Z/AMD. Combined Sequential Cold, Low Air Pressure and Damp Heat Test | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/BFc: Test Z/BF Combined Dry Heat/ Vibration (Sinusoidal) Tests for Both Heat- Dissipating and Non- Heat-Dissipating Specimens | |
| Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/BM: Test Z/BM. Combined Dry Heat/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 2.1: Tests Test Fc. Vibration (Sinusoidal) | |
| Basic Environmental Testing Procedures Part 2.1: Tests Test Q. Sealing | |
| Basic Environmental Testing Procedures Part 2.1: Tests: Part 2.1Z/AFc: Test Z/AFc Combined Cold/Vibration (Sinusoidal) Tests for Both Heat- Dissipating and Non- Heat-Dissipating Specimens | |
| Basic Environmental Testing Procedures Part 2.1Ta: Soldering. Solderability Testing by the Wetting Balance Method | |
| Basic Environmental Testing Procedures Part 2.1Td: Solderability, Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD) | |
| Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2KD: Test Kd. Guidance on Test Kd: Hydrogen Sulfide Test for Contacts and Connections | |
| Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2N: Test N. Guidance on Change of Temperature Tests | |
| Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2Sa: Test Sa. Guidance for Solar Radiation Testing | |
| Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2T: Test T. Guidance to Soldering | |
| Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2Z/AFc and Z/BFc: Test Z/AFc and Z/BFc. Guidance on Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests | |
| Basic Environmental Testing Procedures Part 3: Background Information Part 3A and B: Tests A (Cold) and Tests B (Dry Heat) | |
| Basic Environmental Testing Procedures Part 3: Background Information Part 3Z/AM and Z/BM: Test Z/AM and Z/BM. Combined Temperature/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 4: Miscellaneous Section 4.1: Specification for Mounting of Components, Equipment and Other Articles for Dynamic Tests | |
| Basic Environmental Testing Procedures Part 4: Miscellaneous Section 4.2: Guidance on the Application of the Tests of BS 2011 to Simulate the Effects of Storage | |
| Basic methods for the climatic and durability testing of components for telecommunication and allied electronic equipment. General | |
| Basic methods for the climatic and durability testing of components for telecommunication and allied electronic equipment. Vibration | |
| Bordered Mattresses (Excluding Cellular Rubber Mattresses) for Hospitals, Institutions and Government Departments | |
| Bourdon Tube Pressure and Vacuum Gauges | |
| BS Whitworth (B.S.W.) bright hexagon bolts, set screws and nuts, split-pins, washers and studs | |
| Calcium silicate (sandlime and flintlime) bricks | |
| Children\x92s mattresses \x96 mattresses for moses baskets, perambulators, carrycots and similar domestic articles \x96 Specification | |
| Chucks for Machine Tools and Portable Power Tools - Part 3: Dimensions of Collet Pads for Base Jaws of Power Operated Workholding Chucks | |
| Chucks for Machine Tools and Portable Power Tools - Part 4: Criteria to be Stated Affecting Performance of Power Operated Workholding Chucks at Speed | |
| Chucks for Machine Tools and Portable Power Tools - Part 5: Code of Practice for the Safe Operation of Workholding Chucks Used on Lathes | |
| Chucks for machine tools and portable power tools - Part 7: Specification for workholding chucks with 2-piece jaws, power operated | |
| Chucks for Machine Tools and Portable Power Tools Part 6: Specification for Jaw Serrations, Interfaces and Tee Nuts | |
| Code for Acceptance Tests for Turbo-Compressors and Exhausters | |
| Code of practice for the management of observed hydrometric data | |
| Colour Code for Twin Compensating Cables for Thermocouples | |
| Common names for pesticides \x97 Part 1: Guide to principles for selection of common names | |
| Copper alloy check valves for general purposes | |
| Copper alloy gate valves for general purposes | |
| COPPER TUBES FOR GENERAL PURPOSES | |
| Copper-Cadmium Jointing Sleeves for Telegraph and Telephone Purposes | |
| Crash helmets | |
| Criterion to assess the impact of interference to the terrestrial broadcasting service (BS) | |
| Cut Business Forms and Letterheads | |
| Determination of Cadmium in Copper-Cadmium Alloys (Electrolytic Method) | |
| Dichloromethane (Methylene Chloride) | |
| Diesel and domestic heating fuels \x97 Determination of cold filter plugging point \x97 Stepwise cooling bath method | |
| Digital radio broadcast service, captioned radio | |
| Dimensional Requirements for General Purpose Glass Stopcocks of the Interchangeable Straight Bore Type | |
| Domed Ends for Tanks and Pressure Vessels | |
| Domestic Bedding - Part 10: Specification for Mattresses and Bumpers for Children's Cots, Perambulators and Similar Domestic Articles | |
| Domestic bedding - Part 10: Specification for mattresses and bumpers for children\x92s cots, perambulators and similar domestic articles | |
| Electrode Boilers of Riveted, Seamless, Welded and Cast Iron Construction for Water Heating and Steam Generating | |
| Environmental testing - Part 2.1 Tests - Test Cb: Damp heat, steady state, primarily for equipment | |
| Environmental Testing - Part 2.1 Tests - Tests A. Cold | |
| Environmental testing - Part 5: Guide to drafting of test methods - Section 5.1 General principles | |
| Environmental Testing Part 2.1: Tests Test Ef: Impact, Pendulum Hammer | |
| Environmental Testing Part 2.1: Tests Test Fe and Guidance. Vibration (Sine-Beat Method) | |
| Environmental Testing Part 4: Miscellaneous Section 4.3: Guide to Seismic Test Methods for Equipments | |
| Environmental Testing Part 4: Miscellaneous Section 4.4: Information for Specification Writers - Test Summaries | |
| Environmental Testing Part 5: Guide to Drafting of Test Methods Section 5.2: Terms and Definitions | |
| Environmental testing. General and guidance | |
| Environmental testing. Guidance. Test J. Mould growth | |
| Environmental testing. Guidance. Tests C & D. Guidance for damp heat tests | |
| Environmental testing. Tests. Test Da. Accelerated damp heat | |
| Environmental testing. Tests. Test Ea. Shock | |
| Environmental testing. Tests. Test Eb. Bump | |
| Environmental testing. Tests. Test J. Mould growth | |
| Environmental testing. Tests. Test Kb. Salt mist | |
| Environmental testing. Tests. Test Kc. Sulphur dioxide test for contacts and connections | |
| Environmental testing. Tests. Test M. Low air pressure | |
| Environmental testing. Tests. Test N. Change of temperature | |
| Environmental testing. Tests. Test R. Resistance to fluids | |
| Environmental testing. Tests. Test Z/ABDM. Climatic sequence, primarily intended for components | |
| Extenders for Paints | |
| Fabrics for uniforms and workwear. Specification for fabrics of cotton, man-made fibres and blends | |
| Fabrics for uniforms and workwear. Specification for fabrics of wool and wool blends | |
| Flyer Bobbins Part 1. Specification for Dimensions for Plastics Flyer Bobbins for Speed Frames | |
| Fungal resistance of panel products made of or containing materials of organic origin - Part 0: Guide to methods for determination | |
| Fungal resistance of panel products made of or containing materials of organic origin - Part 2: Method for determination of resistance to cellulose-decomposin g microfungi | |
| Fungal resistance of panel products made of or containing materials of organic origin - Part 3: Methods for determination of resistance to mould or mildew | |
| Fungal resistance of panel products made of or containing materials of organic origin Part 1. Method for determination of resistance to wood-rotting Basidiomycetes | |
| Glass container finishes - Part 1: Specification for continuous thread finish | |
| Glass Container Finishes Part 2: Crown Finish | |
| Glossary of Aeronautical and astronautical terms - Section 10: Auxiliary services | |
| Glossary of Aeronautical and astronautical terms - Section 13: Air-traffic and ground services | |
| Glossary of Aeronautical and astronautical terms - Section 15: Meteorology | |
| Glossary of Aeronautical and astronautical terms - Section 17: Aerospace medicine | |
| Glossary of Aeronautical and astronautical terms - Section 2: Motion of aircraft | |
| Glossary of Aeronautical and astronautical terms \x97 Alphabetical index | |
| Glossary of Aeronautical and astronautical terms \x97 Section 14: Radiocommunication and radiolocation | |
| Glossary of aeronautical and astronautical terms \x97 Section 18: Astronautics | |
| Glossary of Aeronautical and Astronautical Terms \x97 Section 1: General | |
| Glossary of Aeronautical and astronautical terms \x97 Section 3: Structures | |
| Glossary of Aeronautical and astronautical terms \x97 Section 4: Aerodynamics | |
| Glossary of Aeronautical and astronautical terms \x97 Section 5: Heavier-than-air aircraft (aerodynes) | |
| Glossary of Aeronautical and astronautical terms \x97 Section 6: Ballistic and guided missiles | |
| Glossary of Aeronautical and Astronautical Terms \x97 Section 7: Lighter-Than- Air Aircraft (Aerostats) | |
| Glossary of Aeronautical and Astronautical Terms \x97 Section 8: Power Plant | |
| Glossary of Aeronautical and Astronautical Terms \x97 Section 9: Propellers | |
| Glossary of Aeronautical and astronautical terms Section 16: Personnel | |
| Glossary of Paint and related terms | |
| Glossary of Terms for Fillings for Bedding, Upholstery and Other Domestic Articles | |
| Glossary of Terms Relating to Solid Fuel Burning Equipment - Part 2: Industrial Water Heating and Steam Raising Installations | |
| Glossary of Terms Relating to Solid Fuel Burning Equipment Part 1: Domestic Appliances | |
| Glossary of Terms used by the clothing industry | |
| Glossary of Terms Used in the Plastics Industry Part 1: Polymer and Plastics Technology | |
| Glossary of Terms Used in the Plastics Industry Part 2: Manufacturing Processes | |
| Glycerol Triacetate | |
| Guide to achieving effective occupational health and safety performance | |
| Gymnasium equipment - Part 2: Particular requirements - Section 2.7 Specification for basketball and mini-basketball equipment | |
| Gymnasium equipment - Part 2: Particular requirements - Section 2.8 Specification for trampolines, mini-trampolines and safety harnesses (trampoline spotting rig) | |
| Gymnasium equipment - Part 2: Particular requirements - Section 2.9 Specification for weight training equipment | |
| Gymnasium equipment \x97 Part 2: Particular requirements \x97 Section 2.10 Specification for safety requirements for mats, mattresses and landing areas | |
| Gymnasium equipment \x97 Part 2: Particular requirements \x97 Section 2.11 Specification for practice and games netting and supporting trackways | |
| Gymnasium Equipment Part 1: General Requirements | |
| Hacksaw blades - Part 1: Specification for hand and machine hacksaw blades | |
| Hacksaw Blades - Part 2: Specification for Cutting Performance | |
| High Conductivity Copper Tubes for Electrical Purposes | |
| Hose Couplings (Air and Water) (1/8 in. to 1 1/4 in. nominal sizes) | |
| Inclusive service provision - Requirements for identifying and responding to consumer vulnerability | |
| Industrial Platinum Resistance Thermometer Sensors | |
| Instrument tables and anaesthetists trolleys for use in hospital operating theatres and dressings trolleys for use in wards | |
| Isopropyl Acetate | |
| Knurling Wheels | |
| Laboratory Sintered or Fritted Filters Including Porosity Grading | |
| Limits and fits for engineering - Part 1: Limits and tolerances | |
| Limits and Fits for Engineering Part 2: Guide to the Selection of Fits in BS 1916 Part 1 | |
| Limits and Fits for Engineering Part 3: Recommendations for Tolerances, Limits, and Fits for Large Diameters | |
| Lines made from Cotton and Hemp | |
| Marine Main Propulsion Gears and Similar Drives; Metric Module | |
| Measurement of air pollution Part 13: Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method | |
| Method for Determination of Dimensional Changes of Wool-Containing Fabrics During Washing | |
| Method for determination of the linear density of yarns from packages | |
| Method for Determination of Width of Woven or Knitted Fabrics When Relaxed at Zero Tension | |
| Method for test sieving | |
| Method for the determination of length of woven or knitted fabrics when relaxed at zero tension | |
| Method for The determination of tin in copper alloys - (Nickel coil reduction method) - Methods for the analysis of copper alloys | |
| Methods for Basic environmental testing procedures - Part 2.1: Tests - Test Fdc - Random vibration - wide band reproducibility low | |
| Methods for Basic environmental testing procedures - Part 2.1: Tests Test Fda. Random vibration - wide band reproducibility high | |
| Methods for Measurement of air pollution - Part 10: Determination of the mass concentration of sulphur dioxide in ambient air: tetrachloromercurate (TCM)/pararosaniline method | |
| Methods for Measurement of air pollution \x97 Part 7: Determination of mass concentration of sulphur dioxide in ambient air: Thorin spectrophotometric method | |
| Methods for Measurement of air pollution \x97 Part 8: Determination of the mass concentration of nitrogen dioxide in ambient air: modified Griess-Saltzman method | |
| Methods for Measurement of Air Pollution Part 11: Determination of a Black Smoke Index in Ambient Air | |
| Methods for Measurement of Air Pollution Part 12: Determination of Mass the Concentration of Ozone in Ambient Air: Chemiluminescence Method | |
| Methods for measurement of air pollution. The lead dioxide method | |
| Methods for tensile testing of metals Part 4. Steel tubes | |
| Methods for tensile testing of metals. Non-ferrous metals | |
| Methods for tensile testing of metals. Steel (general) | |
| Methods for tensile testing of metals. Steel sheet and strip (less than 3 mm and not less than 0.5 mm thick) | |
| Methods for Testing Refractory Materials - Part 3: General and Textural Properties - Section 3.10: Determination of Resistance to Carbon Monoxide (Method 1902- 310) | |
| Methods for Testing Refractory Materials - Part 3: General and Textural Properties - Section 3.16: Determination of Pore Size Distribution (Method 1902-316) | |
| Methods for Testing Refractory Materials - Part 3: General and Textural Properties - Section 3.1: Guidance on Sampling | |
| Methods for Testing Refractory Materials Part 2: Chemical Analysis (Wet Methods) Section 2.1: Chemical Analysis of Refractories Containing Silica and/or Alumina | |
| Methods for Testing Refractory Materials Part 2: Chemical Analysis (Wet Methods) Section 2.2: Chemical Analysis of Chrome-Bearing Materials | |
| Methods for Testing Refractory Materials Part 2: Chemical Analysis (Wet Methods) Section 2.3: Chemical Analysis of Magnesites and Dolomites | |
| Methods for Testing Refractory Materials Part 3. General and Textural Properties Section 3.4 Determination of True Density (Method 1902-304) | |
| Methods for Testing Refractory Materials Part 3: General and Textural Properties Section 3.11: Measurement of Dimensions and Shape of Refractory Bricks and Blocks (methods 1902-311) | |
| Methods for Testing Refractory Materials Part 3: General and Textural Properties Section 3.13: Measurement of Corner and Edge Defects and Other Surface Imperfections of Refractory Bricks and Blocks (Attributive Properties)... | |
| Methods for Testing Refractory Materials Part 3: General and Textural Properties Section 3.17: Determination of Volume and Bulk Density of Dense Shaped Products (Methods 1902-317) | |
| Methods for Testing Refractory Materials Part 3: General and Textural Properties Section 3.5: Determination of Powder Density (Method 1902-305) | |
| Methods for Testing Refractory Materials Part 3: General and Textural Properties Section 3.6: Determination of Grain Density (Methods 1902-306) | |
| Methods for Testing Refractory Materials Part 3: General and Textured Properties Section 3.14: Determination of Hydration Tendency | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress Section 4.3: Determination of Cold Crushing Strength of Dense Shaped Products (Method 1902-403) | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress Section 4.4: Determination of Modulus of Rupture at Ambient Temperature (Method 1902-404) | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress Section 4.5: Determination of Modulus of Rupture at Elevated Temperature (Method 1902-405) | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress Section 4.7: Determination of Resistance to Abrasion at Elevated Temperature up to 1400 Degrees C (Abradability Index... | |
| Methods for Testing Refractory Materials Part 4: Properties Measured under an Applied Stress Section 4.8: Determination of Refractories-Under-L oad (Rising Temperature Test: Dilatometer Method) (Method 1902-408) | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress: Section 4.1: Determination of the Cold Crushing Strength of Shaped Insulating Refractory Products (Method 1902-401) | |
| Methods for Testing Refractory Materials Part 4: Properties Measured Under an Applied Stress: Section 4.9: Determination of Refractoriness-Under - Load (Rising Temperature Test: Differential Method) (Method 1902-409) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.10: Determination of Permanent Change in Dimensions on Heating of Dense Shaped Products (methods 1902-510) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.2: Determination of pyrometric cone equivalent (refractoriness) (method 1902-502) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.4: Determination of Thermal Expansion (For Large Test Pieces) (Method 1902-504) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.6: Determination of Thermal Conductivity (Hot Wire Method) (Method 1902-506) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.9: Determination of Permanent Change in Dimensions on Heating of Shaped Insulating Products (Method 1902-509) | |
| Methods for Testing Refractory Materials Part 5: Refractory and Thermal Properties: Section 5.0: Introduction | |
| Methods for Testing Refractory Materials Part 8: Refractories Containing Carbon | |
| Methods for The Determination of Copper and Lead in Leaded Bronze Alloys \x97 Methods for The Analysis of Copper Alloys | |
| Methods for The Determination of Copper, Lead, Iron, Aluminium and Nickel in Copper Alloys - Methods for The Analysis of Copper Alloys | |
| Methods for The Determination of Phosphorus in Copper Alloys (Photometric Method) | |
| Methods for The Determination of Silicon in Copper Alloys (Photometric Method) | |
| Methods for the determination of the linear density of textile fibres: gravimetric methods | |
| Methods for The Determination of Zinc in Copper Alloys \x97 Methods for The Analysis of Copper Alloys | |
| Methods for the Measurement of Air Pollution - Part 5: Directional Dust Gauges | |
| Methods for the Measurement of Air Pollution - Part 9: Determination of the Mass Concentration of Nitrogen Oxides in Ambient Air Chemiluminescence Method | |
| Methods for the Measurement of Air Pollution Part 1: Deposit Gauges | |
| Methods for the Measurement of Air Pollution Part 2: Determination of Concentration of Suspended Matter | |
| Methods for the Measurement of Air Pollution Part 3: Determination of Sulphur Dioxide | |
| Methods for the Measurement of Air Pollution Part 6: Sampling Equipment Used for the Determination of Gaseous Sulphur Compounds in Ambient Air | |
| Methods for the Sampling and Analysis of Flue Gases Part 1: Methods of Sampling | |
| Methods for the Sampling and Analysis of Flue Gases Part 2: Analysis by the Orsat Apparatus | |
| Methods for the Sampling and Analysis of Flue Gases Part 3: Analysis by the Haldane Apparatus | |
| Methods for the Sampling and Analysis of Flue Gases Part 4: Miscellaneous Analyses | |
| Methods for the Sampling and Analysis of Flue Gases Part 5: Semi-Routine Analysis | |
| Methods for the Sampling of Iron, Steel, Permanent Magnet Alloys and Ferro-Alloys | |
| Methods of specifying ready-mixed concrete | |
| METHODS OF TEST FOR FUNGAL RESISTANCE OF MANUFACTURED BUILDING MATERIALS MADE OF OR CONTAINING MATERIALS OF ORGANIC ORIGIN | |
| Methods of Test for Stabilized Soils | |
| Methods of Testing Concrete - Part 5: Methods of Testing Hardened Concrete for Other Than Strength | |
| Methods of Testing Concrete Part 108: Method for Making Test Cubes from Fresh Concrete | |
| Methods of Testing Concrete Part 111: Method of Normal Curing of Test Specimens (20 Degrees Celsius Method) | |
| Methods of Testing Concrete Part 113: Method for Making and Curing No-Fines Test Cubes | |
| Methods of Testing Concrete Part 119: Method for Determination of Compressive Strength Using Portions of Beams Broken in Flexure (Equivalent Cube Method) | |
| Methods of Testing Concrete Part 122: Method for Determination of Water Absorption | |
| Methods of Testing Concrete Part 125: Methods for Mixing and Sampling Fresh Concrete in the Laboratory | |
| Methods of testing concrete. Analysis of hardened concrete | |
| Methods of testing concrete. Method of mixing and sampling fresh concrete in the laboratory | |
| Methods of testing Refractory materals Part 5. Refractory and thermal properties Section 5.3 Determination of thermal expansion (horizontal method to 1100\xb0C) (method 1902-503) | |
| Methods of testing Refractory materials - Part 10: Investment casting shell mould systems - Section 10.1 Determination of resistance to deformation at elevated temperatures | |
| Methods of testing Refractory materials - Part 11: Refractory mortars and putties | |
| Methods of Testing Refractory Materials - Part 3: General and Textural Properties - Section 3.3: Sieve Analysis (Methods 1902-303) | |
| Methods of testing Refractory materials - Part 4: Properties measured under an applied stress - Section 4.0 Introduction | |
| Methods of testing Refractory materials - Part 4: Properties measured under an applied stress - Section 4.6 Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature)... | |
| Methods of testing Refractory materials - Part 5: Refractory and thermal properties - Section 5.13 Determination of resistance to attack by slag (method 1902-513) | |
| Methods of testing Refractory materials - Part 5: Refractory and thermal properties - Section 5.5 Determination of thermal conductivity (panel/calorimeter method) (method 1902-505) | |
| Methods of testing Refractory materials - Part 5: Refractory and thermal properties - Section 5.8 Determination of thermal conductivity (split column method) (method 1902-508) | |
| Methods of testing Refractory materials - Part 6: Ceramic fibre products | |
| Methods of testing refractory materials - Part 9. Chemical analysis by instrumental methods - Section 9.3 Determination of chromium (VI) | |
| Methods of testing Refractory materials - Part 9: Chemical analysis by instrumental methods - Section 9.1 Analysis of alumino-silicate refractories by X-ray fluorescence | |
| Methods of testing Refractory materials - Part 9: Chemical analysis by instrumental methods - Section 9.2 Analysis of silica refractories by X-ray fluorescence | |
| Methods of testing Refractory materials \x97 Part 3: General and textural properties \x97 Section 3.19 Measurement of dimensions and external defects of refractory bricks \x97 Dimensions and conformity to drawings... | |
| Methods of testing Refractory materials \x97 Part 3: General and textural properties \x97 Section 3.2 Measurement of dimensions of specimens for testing (methods 1902-302) | |
| Methods of testing Refractory materials \x97 Part 5: Refractory and thermal properties \x97 Section 5.11 Determination of thermal spalling resistance by the prism test (method 1902-511) | |
| Methods of testing Refractory materials Part 10: Investment casting shell mould systems Section 10.2: Determination of permeability and standard air flow capacity at elevated temperatures | |
| Methods of Testing Refractory Materials Part 1A: Sampling and Physical Tests | |
| Methods of Testing Refractory Materials Part 5: Refractory and Thermal Properties Section 5.14: Determination of Thermal Expansion (Temperatures up to 1500 Degrees C) (Methods 1902-514) | |
| Methods of testing Refractory Materials Part 7: Unshaped Refractories Used in Monolithic Construction Section 7.2: Testing of Material as Supplied and Received (Method 1902-702) | |
| Methods of testing Refractory Materials Part 7: Unshaped Refractories Used in Monolithic Construction Section 7.3: Preparation of Test Pieces from Dense Castable by Vibration (Method 1902-703) | |
| Methods of testing refractory materials. Basic refractory materials | |
| Methods of testing refractory materials. Chemical analysis of aluminous materials | |
| Methods of testing refractory materials. Chemical analysis of high silica and aluminosilicate materials | |
| Methods of testing refractory materials. Determination of silica in high silica, aluminosilicate and aluminous materials by coagulation | |
| Methods of testing refractory materials. General and textural properties. Determination of bulk density and true porosity of shaped insulating products (method 1902-307) | |
| Methods of testing refractory materials. General and textural properties. Determination of bulk density, true porosity and apparent porosity of dense shaped products (methods 1902-308) | |
| Methods of testing refractory materials. General and textural properties. Determination of permeability to gases (method 1902-309) | |
| Methods of testing refractory materials. General and textural properties. Determination of resistance to acids (method 1902-312) | |
| Methods of testing refractory materials. General and textural properties. Introduction | |
| Methods of testing refractory materials. Mouldable and castable refractories | |
| Methods of testing refractory materials. Properties measured under an applied stress. Determination of creep in compression (method 1902-410) | |
| Methods of testing Refractory Materials: Part 7: Unshaped Refractories Used in Monolithic Construction: Section 7.0: Introduction and Definitions | |
| Methods of testing Refractory Materials: Part 7: Unshaped Refractories Used in Monolithic Construction: Section 7.1: Guidance on Sampling (of Unshaped Refractories) | |
| Methods of testing the strength of yarns from packages. Determination of breaking strength and extension | |
| Methods of testing the strength of yarns from packages. Determination of knot strength and loop strength | |
| Mild steel drums (light duty: removable heads) - Part 1: Specification for drums with a total capacity of 213 litres | |
| NICKEL SILVER STRIP AND FOIL FOR THE TELECOMMUNICATION INDUSTRIES | |
| One-Mark Volumetric Flasks | |
| Open-Ended Wrenches | |
| Operational practices for loudness in the international exchange of digital television programmes | |
| oxy-acetylene welding of high temperature and high pressure pipelines | |
| Parallel Steel Dowel Pins Part 2: Metric Series | |
| Parallel Steel Dowel Pins Part 3: Parallel and Taper Types, Having Screw Threads for Extraction Purposes, Metric Series | |
| Performance requirements for an advanced multichannel stereophonic sound system for use with or without accompanying picture | |
| Performance requirements for an advanced sound system for use with or without accompanying picture | |
| Pillows (Excluding Cellular Rubber Pillows) for Hospitals, Institutions and Government Departments | |
| Power-Driven Mobile Cranes | |
| Presentation of Numerical Values (Fineness of Expansion: Rounding of Numbers) | |
| Pressure Operated Relay Valves for Domestic, Commercial and Catering Gas Appliances | |
| Protection criteria for terrestrial broadcasting systems | |
| Protection requirements for broadcasting systems operating in the LF, MF, HF and VHF bands below 80 MHz against the impact of power line telecommunication Systems | |
| Protective Helmets For Motor Cyclists | |
| Recommendations for Alphabetical arrangement and the filing order of numbers and symbols | |
| Recommended common names for pest control products | |
| Recommended Common Names for Pesticides | |
| Refractory materials Part 7. Unshaped refractories used in monolithic construction Section 7.6 Testing of materials as preformed test pieces | |
| Refractory Materials Part 7: Unshaped Refractories Used in Monolithic Construction Section 7.4: Preparation of Test Pieces From Insulating Castables (Method 1902-704) | |
| Refractory Materials Part 7: Unshaped Refractories Used in Monolithic Construction Section 7.5: Preparation of Test Pieces From Mouldables and Ramming Mixes (Method 1902-705) | |
| Requirements for enhanced multimedia services for digital terrestrial broadcasting in VHF Bands I and II | |
| Requirements for loudness and true-peak indicating meters | |
| Rubber Hot Water Bottles | |
| Safety Footwear - Part 2: Specification for Lined Rubber Safety Boots | |
| Safety Footwear Part 3. Specification for Polyvinyl Chloride Moulded Safety Footwear | |
| Safety footwear. Specification for safety footwear other than all-rubber and all-plastics moulded types | |
| Safety Requirements for Children's Cots for Domestic Use | |
| Seamless steel butt-welding pipe fittings | |
| Serial multichannel audio digital interface for broadcasting studios | |
| Specification Air Rings (Hand Made) for Hospital Use | |
| Specification for 2-ethylhexan-1-ol | |
| Specification for attachment of mounted implements to agricultural wheeled tractors. Imperial units | |
| Specification for Automatic Flushing Cisterns for Urinals | |
| Specification for bi-pin lamp-holders for tubular fluorescent lamps for use in circuits the declared voltage of which does not exceed 250 volts | |
| Specification for Bit Braces | |
| Specification for bitumen-based filling compounds for electrical purposes | |
| Specification for butt-welding pipe fittings for pressure purposes. Part 1: Carbon steel | |
| Specification for carbolic soap | |
| Specification for cast aluminium saucepans and frying pans | |
| Specification for Chart Ranges for Temperature Recording Instruments | |
| Specification for Chucks for machine tools and portable power tools - Part 1: Tool-holding chucks | |
| Specification for Chucks for Machine Tools and Powtable Power Tools Part 2. Work-holding chucks | |
| Specification for Circular gear shaving cutters, 1 to 8 metric module, accuracy requirements | |
| Specification for copper and copper-cadmium tapes and binders for telegraph and telephone purposes | |
| Specification for copper binding and jointing wires for telegraph and telephone purposes | |
| Specification for copper jointing sleeves for telegraph and telephone purposes | |
| Specification for corrugated copper jointing strip for expansion joints for use in general building construction | |
| Specification for Corrugated Furnaces for Shell Boilers | |
| Specification for Cotton-covered copper conductors - Part 2: Rectangular Conductors | |
| Specification for Couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings | |
| Specification for design and dimensional features of measuring and control instruments for industrial processes | |
| Specification for Dimensions of 135-Size Photographic Film and Magazine | |
| Specification for Dimensions of Conduit Dies, Diestocks and Guides | |
| Specification for Dimensions of Toroidal Sealing Rings | |
| Specification for dispensing measures for pharmaceutical purposes. Metric units | |
| Specification for Domestic bedding - Part 8. Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters) | |
| Specification for Domestic Bedding Part 9. Upholstered Wood-Framed Divans | |
| Specification for domestic bedding. Part 1: Spring interior mattresses for adult use (performance and construction) | |
| Specification for Double-Ended Open-Jawed Spanners for B.A. Hexagon Sizes | |
| Specification for Elastic Flat Braids Containing Natural Rubber with Cotton, Rayon or Nylon | |
| Specification for Electroplated Coatings of Tin | |
| Specification for enamelled and cotton covered copper conductors (oleo-resinous enamel). Round wire | |
| Specification for Engineers' Ratchet Braces and Drilling Pillars | |
| Specification for ethyl methyl ketone (methyl ethyl ketone) | |
| Specification for felt backed linoleum | |
| SPECIFICATION FOR FILLER METALS FOR BRAZING | |
| Specification for fireclay refractories (bricks and shapes) | |
| Specification for Fireguards for heating appliances - (Gas, electric and oil-burning) | |
| Specification for Flanged Bobbins for Doubling and Twisting | |
| Specification for flexible polymeric tubing and drainage sheeting (radio-opaque) for medical use | |
| Specification for Floats for Ballvalves (Copper) | |
| Specification for Galvanized line-wire for telephone and telegraph purposes | |
| Specification for General purpose galvanized steel wire strand | |
| Specification for glass dispensing measures for pharmaceutical purposes | |
| Specification for glass filter funnels | |
| Specification for glass honey jars | |
| Specification for gravel aggregates for surface treatment (including surface dressings) on roads | |
| Specification for grommets for general purposes (rubber and rubber-like materials) | |
| Specification for gymnasium equipment. Part 2: Particular requirements. Section 2.2: Ropes | |
| Specification for gymnasium equipment. Part 2: Particular requirements. Section 2.4: Beating boards, spring boards, balancing benches and jump stands | |
| Specification for gymnasium equipment. Part 2: Particular requirements. Section 2.5: Gymnastic competition equipment | |
| Specification for gymnasium equipment. Particular requirements. Boxes, bucks and horses, mats and mattresses | |
| Specification for gymnasium equipment. Particular requirements. Boxing rings and weight training equipment | |
| Specification for Hacksaw Blades | |
| Specification for Hard Soap | |
| Specification for Hospital bedside lockers \x97 Part 2: General purpose lockers of wooden construction with facilities for hanging day clothes | |
| Specification for hospital bedside lockers. General purpose hospital bedside lockers of wooden construction | |
| Specification for Hospital Ward Bedsteads for Psychiatric Hospitals | |
| Specification for Large aluminium alloy rivets (1/2 in. to 1 in. nominal diameters) | |
| Specification for Length bars and their accessories \x97 (Imperial Units) | |
| Specification for Linen and linen union textiles | |
| Specification for Marking codes for resistors and capacitors | |
| Specification for Metal-framed wheeled screens for use in hospitals | |
| Specification for Mild steel drums (light duty: removable heads) | |
| Specification for nickel clad steel plate | |
| Specification for nominal diameters of round built-up tins | |
| Specification for Oil Resistant Compressed Asbestos Fibre Jointing | |
| Specification for Open-Ended Wrenches Part 1: Metric and Unified | |
| Specification for Open-ended wrenches Part 2: BS and Whitworth | |
| Specification for Parallel steel dowel pins - Part 1: Inch Series | |
| Specification for person weighing machines and height-measuring equipment for hospitals, welfare and health services | |
| Specification for polythene pipe (Type 32) for above ground use for cold water services | |
| Specification for polythene pipe (Type 32) for general purposes including chemical and food industry uses | |
| Specification for Precision Reels for Bare and Oxidized Resistance Wires (0.010 mm to 0.0125 mm Diameter Inclusive) | |
| Specification for Processed Disk Records and Rproducng Equipment | |
| Specification for Protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts | |
| Specification for rubber post-mortem gloves | |
| Specification for Screw threads and external dimensions of lamps for endoscopic and diagnostic instruments | |
| Specification for Secondary reference thermometers | |
| Specification for Single bucket excavators of the crawler-mounted friction-driven type | |
| Specification for Sizes of black-and-white photographic sheet film for general, professional and industrial use | |
| Specification for Sizes of reprographic papers | |
| Specification for Slides and film strips | |
| Specification for Soap Flakes | |
| Specification for Soft Soap | |
| Specification for Spindle Noses and Adjustable Adaptors for Multi-Spindle Heads | |
| Specification for Stainless steel hollow-ware for use in hospital operating-theatres and wards | |
| Specification for Stainless Steel Milk Pipes and Fittings (Recessed Ring Joint Type) | |
| Specification for Steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries | |
| Specification for Steel Columns for Street Lighting | |
| Specification for Steel Globe and Globe Stop and Check Valves (Flanged and Butt-Welding Ends) for the Petroleum, Petrochemical and Allied Industries | |
| Specification for Still projectors | |
| Specification for Sunflower Seed Oil for General Purposes | |
| Specification for textile screening cloths | |
| Specification for the fabrication of lightweight articles (other than rainwear) from polyvinyl chloride sheeting | |
| Specification for Titanium dioxide pigments for paints | |
| Specification for Toilet Soap | |
| Specification for tools for soldered socket-spigot joints for lead and lead alloy pipes | |
| Specification for tritolyl phosphate | |
| Specification for Undercuts nd Runouts for Screw Threads Part 2. IS0 Metric screw threads | |
| Specification for Unified Machine Screws and Machine Screw Nuts | |
| Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF Threads) Normal series | |
| Specification for vegetable parchment for wrapping dairy and other food products | |
| Specification for wood poles for overhead lines (power and telecommunication lines) | |
| Specification for wooden domestic lattice steps and step stools | |
| Specification for Woodworking Chisels and Gouges | |
| Specification for Woven Elastic Webbings | |
| Specification Steel spring washers for general engineering and automobile purposes | |
| Specification Undercuts & Runouts for Screw Threads - Part 1: Inch Screw Threads | |
| Specification. Primary cells and batteries for intrinsically safe circuits in coal mines | |
| Specification. Synthetic-resin bonded-paper insulating tubes (rectangular cross-section) for electrical power circuits up to 1000 volts | |
| Sports mats - Part 3: Specification for fire safety requirements for mats, mattresses and landing areas | |
| Sports mats \x97 Part 4: Specification for combat mats | |
| Stabilized materials for civil engineering purposes - Part 1: General requirements, sampling, sample preparation and tests on materials before stabilization | |
| Stabilized materials for civil engineering purposes - Part 2: Methods of test for cement-stabilized and lime-stabilized materials | |
| Steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries | |
| Tables for use in the calibration of volumetric glassware | |
| Tagged Boot and Shoe Laces (Cotton) | |
| Tensile testing of metals | |
| Test Sieving - Part 1: Methods Using Test Sieves of Woven Wire Cloth and Perforated Metal Plate | |
| Testing Concrete - Part 101: Method of Sampling Fresh Concrete on Site | |
| Testing Concrete - Part 102: Method for Determination of Slump | |
| Testing Concrete - Part 104: Method for Determination of Vebe Time | |
| Testing Concrete - Part 105: Method for Determination of Flow | |
| Testing Concrete - Part 107: Method for Determination of Density of Compacted Fresh Concrete | |
| Testing concrete - Part 110: Method for making test cylinders from fresh concrete | |
| Testing concrete - Part 114: Methods for determination of density of hardened concrete | |
| Testing Concrete - Part 117: Method for Determination of Tensile Splitting Strength | |
| Testing Concrete - Part 118: Method for Determination of Flexural Strength | |
| Testing Concrete - Part 120: Method for Determination of the Compressive Strength of Concrete Cores | |
| Testing Concrete - Part 121: Method of Determination of Static Modulus of Elasticity in Compression | |
| Testing Concrete - Part 124: Methods for Analysis of Hardened Concrete | |
| Testing concrete - Part 127: Method of verifying the performance of a concrete cube compression machine using the comparative cube test | |
| Testing concrete - Part 128. Methods for analysis of fresh concrete | |
| Testing Concrete - Part 201: Guide to the Use of Non-Destructive Methods of Test for Hardened Concrete | |
| Testing Concrete - Part 202: Recommendations for Surface Hardness Testing by Rebound Hammer | |
| Testing Concrete - Part 203: Recommendations for Measurement of Velocity of Ultrasonic Pulses in Concrete | |
| Testing Concrete - Part 204: Recommendations on the Use of Electromagnetic Covermeters | |
| Testing Concrete - Part 206: Recommendations for Determination of Strain in Concrete | |
| Testing Concrete - Part 209: Recommendations for the Measurement of Dynamic Modulus of Elasticity | |
| Testing concrete \x97 Part 207: Recommendations for the assessment of concrete strength by near-to-surface tests | |
| Testing concrete \x97 Part 208: Recommendations for the determination of the initial surface absorption of concrete | |
| Testing Concrete Part 103. Method for Determination of Compacting Factor | |
| Testing Concrete Part 106: Methods for Determination of Air Content of Fresh Concrete | |
| Testing concrete Part 109: Method for making test beams from fresh concrete | |
| Testing Concrete Part 112: Methods of Accelerated Curing of Test Cubes | |
| Testing Concrete Part 116: Method for Determination of Compressive Strength of Concrete Cubes | |
| Testing concrete Part 122: Method for determination of water absorption | |
| Testing Concrete Part 129: Method for Determination of Density of Partially Compacted Semi-Dry Fresh Concrete | |
| Testing Concrete Part 130: Method for Temperature-Matched Curing of Concrete Specimens | |
| Testing Concrete Part 131: Methods for Testing Cement in a Reference Concrete | |
| Testing concrete Part 205. Recommendations for radiography of concrete | |
| Testing concrete Part 211: Procedure and terminology for the petrographic examination of hardened concrete | |
| Testing concrete. Specification for compression testing machines for concrete | |
| Testing hardened concrete - Part 210: Determination of the potential carbonation resistance of concrete \x96 Accelerated carbonation method | |
| Tests for Performance Characteristics of Sintered Filters | |
| The Determination of the Viscosity of Liquids In C.G.S. Units | |
| The enviromental testing of electronic components and electronic equipment. Robustness of terminations. | |
| Thin PVC Sheeting (Calendered, Flexible, Unsupported) | |
| Tracked Changes (Redline) - Children\x92s mattresses \x96 mattresses for moses baskets, perambulators, carrycots and similar domestic articles \x96 Specification | |
| Tracked Changes (Redline) - Code of practice for the management of observed hydrometric data | |
| Tracked Changes (Redline) - Hydraulically bound and stabilized materials for civil engineering purposes Part 1: Sampling, sample preparation and testing of materials before treatment | |
| Tracked Changes (Redline) - Testing concrete \x96 Part 124: Methods for analysis of hardened concrete | |
| Tracked Changes (Redline) - Unbound, hydraulically bound and stabilized materials for civil engineering purposes - Part 2: Sample preparation and testing of materials during and after treatment - Test method... | |
| Triphenyl Phosphate | |
| Tubular Fluorescent Lamps for General Lighting Service Part 1. Internationally Specified Lamps | |
| Tubular Fluorescent Lamps for General Lighting Service Part 2: Lamps Used in the United Kingdom Not Included in Part 1 | |
| Unified Black Hexagon Bolts, Screws, Nuts (UNC & UNF Threads) Heavy Series | |
| Wood Poles for Overhead Power and Telecommunication Lines - Part 1: Specification for Softwood Poles | |
| Woven Asbestos Tape for Electrical Insulating Purposes |
| << Prev | Next >> |