Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
600
610
620
630
640
650
659
660
661
662
663
664
665
666
667
668
669
670
671
680
690
700
710
720
730
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements | |
| Aerospace series \x96 Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel \x96 Dimensions and loads \x96 Inch series | |
| Aerospace series \x96 Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel \x96 Dimensions and loads \x96 Inch series | |
| Aerospace series \x96 Receptacle, floating, double lug | |
| Aerospace series \x96 Receptacle, floating, single lug | |
| Aerospace series \x96 Rivet, 100\xb0 normal flush head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rivet, universal head, close tolerance \x96 Inch series | |
| Aerospace series \x96 Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank \x96 Dimensions and loads \x96 Inch series | |
| Aerospace series \x96 Rod-end, spherical, plain bearing, metal to metal \x96 Technical specification | |
| Aerospace series \x96 Rotary fasteners \x96 Structural and non-structural applications \x96 Technical specification | |
| Aerospace series \x96 Washer, retaining | |
| Aerospace series \x96 Washer, spring, countersunk | |
| Agricultural and forestry machinery \x96 Safety of log splitters \x96 Part 1: Wedge splitters | |
| Agricultural and forestry machinery \x96 Safety of log splitters \x96 Part 2: Screw splitters | |
| Aircraft batteries - Part 1: General test requirements and performance levels | |
| Aircraft batteries - Part 2: Design and construction requirements | |
| Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) | |
| Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements | |
| Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines | |
| Alarm and electronic security systems \x96 Part 11-31: Electronic access control systems \x96 Core interoperability protocol based on Web services | |
| Alarm and electronic security systems \x96 Part 11-32: Electronic access control systems \x96 Access control monitoring based on Web services | |
| Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) | |
| Arc welding equipment \x96 Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment \x96 Part 11: Electrode holders | |
| Arc welding equipment \x96 Part 12: Coupling devices for welding cables | |
| Arc welding equipment \x96 Part 13: Welding clamp | |
| Arc welding equipment \x96 Part 1: Welding power sources | |
| Arc welding equipment \x96 Part 2: Liquid cooling systems | |
| Arc welding equipment \x96 Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment \x96 Part 4: Periodic inspection and testing | |
| Arc welding equipment \x96 Part 5: Wire feeders | |
| Arc welding equipment \x96 Part 6: Limited duty equipment | |
| Arc welding equipment \x96 Part 7: Torches | |
| Arc welding equipment \x96 Part 8: Gas consoles for welding and plasma cutting systems | |
| Arc welding equipment \x96 Part 9: Installation and use | |
| Audio recording - Compact disc digital audio system | |
| Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements | |
| Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements | |
| Ballasts for tubular fluorescent lamps - Performance requirements | |
| Circuit-breakers for equipment (CBE) | |
| Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment... | |
| Complete filter units for radio interference suppression - Part 2-2: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (safety... | |
| Connecting devices \x96 Electrical copper conductors \x96 Safety requirements for screw-type and screwless-type clamping units \x96 Part 1: General requirements and particular requirements for clamping units for conductors from 0.2... | |
| Connecting devices \x96 Electrical copper conductors \x96 Safety requirements for screw-type and screwless-type clamping units \x96 Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to... | |
| Connecting devices for low voltage circuits for household and similar purposes - Part 1: General requirements | |
| Connecting devices for low voltage circuits for household and similar purposes \x96 Part 1: General requirements | |
| Connecting devices for low voltage circuits for household and similar purposes \x96 Part 2-4: Particular requirements for twist-on connecting devices | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation piercing clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes \x96 Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes \x96 Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | |
| Connecting devices for low-voltage circuits for household and similar purposes \x96 Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units | |
| Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis | |
| Digital audio interface -- Part 4: Professional applications | |
| Digital audio interface \x96 Part 1: General | |
| Digital audio interface \x96 Part 3: Consumer applications | |
| Digital audio interface \x96 Part 4-1: Professional applications \x96 Audio content | |
| Digital audio interface \x96 Part 4-2: Professional applications \x96 Metadata and subcode | |
| Digital audio interface \x96 Part 4-4: Professional applications \x96 Physical and electrical parameters | |
| Digital audio interface \x96 Part 4: Professional applications (TA4) | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 100: General | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 201: General tests \x96 Measurement of insulation thickness | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 202: General tests \x96 Measurement of thickness of non-metallic sheath | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 203: General tests \x96 Measurement of overall dimensions | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 301: Electrical tests \x96 Measurement of the permittivity at 23 \xb0C of filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 302: Electrical tests \x96 Measurement of the d.c. resistivity at 23 \xb0C and 100 \xb0C of filling... | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 401: Miscellaneous tests \x96 Thermal ageing methods \x96 Ageing in an air oven | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 402: Miscellaneous tests \x96 Water absorption tests | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 403: Miscellaneous tests \x96 Ozone resistance test on cross-linked compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 404: Miscellaneous tests \x96 Mineral oil immersion tests for sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 405: Miscellaneous tests \x96 Thermal stability test for PVC insulations and PVC sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 406: Miscellaneous tests \x96 Resistance to stress cracking of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 407: Miscellaneous tests \x96 Measurement of mass increase of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 408: Miscellaneous tests \x96 Long-term stability test of polyethylene and polypropylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 409: Miscellaneous tests \x96 Loss of mass test for thermoplastic insulations and sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 410: Miscellaneous tests \x96 Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 411: Miscellaneous tests \x96 Low-temperature brittleness of filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 412: Miscellaneous tests \x96 Thermal ageing methods \x96 Ageing in an air bomb | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 501: Mechanical tests \x96 Tests for determining the mechanical properties of insulating and sheathing compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 502: Mechanical tests \x96 Shrinkage test for insulations | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 503: Mechanical tests \x96 Shrinkage test for sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 504: Mechanical tests \x96 Bending tests at low temperature for insulation and sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 505: Mechanical tests \x96 Elongation at low temperature for insulations and sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 506: Mechanical tests \x96 Impact test at low temperature for insulations and sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 507: Mechanical tests \x96 Hot set test for cross-linked materials | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 508: Mechanical tests \x96 Pressure test at high temperature for insulation and sheaths | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 509: Mechanical tests \x96 Test for resistance of insulations and sheaths to cracking (heat shock test) | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 510: Mechanical tests \x96 Methods specific to polyethylene and polypropylene compounds \x96 Wrapping test after thermal ageing... | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 511: Mechanical tests \x96 Measurement of the melt flow index of polyethylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 512: Mechanical tests \x96 Methods specific to polyethylene and polypropylene compounds \x96 Tensile strength and elongation at... | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 513: Mechanical tests \x96 Methods specific to polyethylene and polypropylene compounds \x96 Wrapping test after conditioning | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 601: Physical tests \x96 Measurement of the drop point of filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 602: Physical tests \x96 Separation of oil in filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 603: Physical tests \x96 Measurement of total acid number of filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 604: Physical tests \x96 Measurement of absence of corrosive components in filling compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 605: Physical tests \x96 Measurement of carbon black and/or mineral filler in polyethylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 606: Physical tests \x96 Methods for determining the density | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 607: Physical tests \x96 Test for the assessment of carbon black dispersion in polyethylene and polypropylene | |
| Electrical accessories \x96 Circuit breakers for overcurrent protection for household and similar installations \x96 Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 2: Circuit-breakers for a.c. and d.c. operation | |
| Electrical accessories \x96 Cord sets and interconnection cord sets | |
| Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing | |
| Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation | |
| Electrical test methods for electric cables - Part 2: Partial discharge tests | |
| Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | |
| Electroacoustics - Sound calibrators | |
| Electrolyte for vented nickel-cadmium cells | |
| Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | |
| Electromagnetic compatibility (EMC) \x96 Part 1-2: General \x96 Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | |
| Equipment for monitoring of radionuclides in liquid effluents and surface waters | |
| Fibre optic branching devices - Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic passive power control devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Non-wavelength-selec tive fibre optic branching devices \x96 Part 1: Generic specification | |
| Filament lamps for road vehicles \x96 Dimensional, electrical and luminous requirements | |
| Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | |
| Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 1: Generic specification | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 2-1: Blank detail specification \x96 Inductors for which safety tests are required \x96 Assessment level D. | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 2: Sectional specification | |
| GRAFCET specification language for sequential function charts | |
| Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression | |
| Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) | |
| Hard-drawn aluminium wire for overhead line conductors | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 1: VHS and compact VHS video cassette system | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 2: FM audio recording | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 3: S-VHS | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 4: S-VHS video cassette system - ET-mode | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS | |
| IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data | |
| Industrial electroheat equipment \x96 Test methods for electroslag remelting furnaces | |
| Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test | |
| Information technology equipment \x96 Safety -- Part 1: General requirements | |
| Information technology equipment \x96 Safety \x96 Part 1: General requirements | |
| Information technology equipment \x96 Safety \x96 Part 21: Remote power feeding | |
| Information technology equipment \x96 Safety \x96 Part 22: Equipment installed outdoors | |
| Information technology equipment \x96 Safety \x96 Part 23: Large data storage equipment | |
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the... | |
| Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the... | |
| Insulating liquids - Methods for counting and sizing particles | |
| Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration | |
| Insulating liquids \x96 Specifications for unused liquids based on synthetic aromatic hydrocarbons | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone... | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide... | |
| Integrating-averagin g sound level meters | |
| Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 | |
| Lamps for road vehicles \x96 Dimensional, electrical and luminous requirements | |
| Lamps for road vehicles \x96 Performance requirements | |
| Live working - Gloves of insulating material | |
| Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks | |
| Live working - Insulating sticks and attachable devices - Part 2: Attachable devices | |
| Live working \x96 Conductive clothing for use at nominal voltage up to 800 kV a.c. and \xb1 600 kV d.c. | |
| Live working \x96 Hand tools for use up to 1000 V a.c. and 1500 V d.c. | |
| Live working \x96 Insulating foam-filled tubes and solid rods \x96 Part 1: Tubes and rods of a circular cross-section | |
| Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters | |
| Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests | |
| Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements \x96 Flow rate switches | |
| Low-voltage switchgear and controlgear \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear \x96 Part 4-1: Contactors and motor-starters \x96 Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear \x96 Part 4-3: Contactors and motor-starters \x96 AC semiconductor controllers and contactors for non-motor loads | |
| Low-voltage switchgear and controlgear \x96 Part 5-1: Control circuit devices and switching elements \x96 Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear \x96 Part 5-2: Control circuit devices and switching elements \x96 Proximity switches | |
| Low-voltage switchgear and controlgear \x96 Part 5-3: Control circuit devices and switching elements \x96 Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | |
| Low-voltage switchgear and controlgear \x96 Part 5-4: Control circuit devices and switching elements \x96 Method of assessing the performance of low-energy contacts \x96 Special tests | |
| Low-voltage switchgear and controlgear \x96 Part 5-5: Control circuit devices and switching elements \x96 Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear \x96 Part 5-6: Control circuit devices and switching elements \x96 DC interface for proximity sensors and switching amplifiers (NAMUR) | |
| Low-voltage switchgear and controlgear \x96 Part 5-7: Control circuit devices and switching elements \x96 Requirements for proximity devices with analogue output | |
| Low-voltage switchgear and controlgear \x96 Part 5-8: Control circuit devices and switching elements \x96 Three-position enabling switches | |
| Low-voltage switchgear and controlgear \x96 Part 6-1: Multiple function equipment \x96 Transfer switching equipment | |
| Low-voltage switchgear and controlgear \x96 Part 6-2: Multiple function equipment \x96 Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear \x96 Part 7-1: Ancillary equipment \x96 Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear \x96 Part 7-2: Ancillary equipment \x96 Protective conductor terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear \x96 Part 7-3: Ancillary equipment \x96 Safety requirements for fuse terminal blocks | |
| Low-voltage switchgear and controlgear \x96 Part 7-4: Ancillary equipment \x96 PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear \x96 Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Maritime navigation and radiocommunication equipment and systems \x96 General requirements \x96 Methods of testing and required test results | |
| Medical electrical equipment - Medical electron accelerators - Functional performance characteristics | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulato r | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier | |
| Methods of measurement for equipment used in digital microwave radio transmission systems \x96 Part 3: Measurements on satellite earth stations \x96 Section 10: Terminal equipment \x96 TDMA traffic earth stations... | |
| Methods of measurement of touch current and protective conductor current | |
| Miniature lamps | |
| Miscellaneous lampholders \x96 Part 1: General requirements and tests | |
| Miscellaneous lampholders \x96 Part 2-2: Particular requirements \x96 Connectors for LED-modules | |
| Miscellaneous lampholders \x96 Part 2-3: Particular requirements \x96 Lampholders for double-capped linear LED lamps | |
| Miscellaneous lampholders \x96 Part 2: Particular requirements \x96 Section 1: Lampholders S14 | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1:... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail... | |
| Modular order for the development of mechanical structures for electronic equipment practices \x96 Part 1: Generic standard | |
| Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | |
| Non-cellulosic papers for electrical purposes - Part 2: Methods of test | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glasspaper | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers | |
| Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles | |
| Nuclear facilities \x96 Electrical equipment important to safety \x96 Qualification | |
| Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions | |
| Nuclear power plants \x96 Control rooms \x96 Design | |
| Nuclear power plants \x96 Control rooms \x96 Supplementary control room for reactor shutdown without access to the main control room | |
| Nuclear power plants \x96 Instrumentation and control important to safety \x96 Hardware design requirements for computer-based systems | |
| Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods | |
| Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods | |
| Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods | |
| Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables | |
| Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables | |
| Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres | |
| Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres | |
| Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables | |
| Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling | |
| Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling | |
| Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application | |
| Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing | |
| Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing | |
| Optical fibre cables \x96 Part 1-1: Generic specification \x96 General | |
| Optical fibre cables \x96 Part 1-21: Generic specification \x96 Basic optical cable test procedures \x96 Mechanical tests methods | |
| Optical fibre cables \x96 Part 1-23: Generic specification \x96 Basic optical cable test procedures \x96 Cable element test methods | |
| Optical fibre cables \x96 Part 1-2: Generic specification \x96 Basic optical cable test procedures \x96 General guidance | |
| Optical fibre cables \x96 Part 1-2: Generic specification \x96 Basic optical cable test procedures | |
| Optical fibre cables \x96 Part 1-3: Generic specification \x96 optical cable elements | |
| Optical fibre cables \x96 Part 2-10: Indoor optical fibre cables \x96 Family specification for simplex and duplex cables | |
| Optical fibre cables \x96 Part 2-11: Indoor optical fibre cables \x96 Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-21: Indoor optical fibre cables \x96 Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-22: Indoor cables \x96 Detail specification for multi-simplex breakout optical cables to be terminated with connectors | |
| Optical fibre cables \x96 Part 2-30: Indoor cables \x96 Family specification for ribbon cables | |
| Optical fibre cables \x96 Part 2-31: Indoor cables \x96 Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-50: Indoor cables \x96 Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables \x96 Part 2-51: Indoor cables \x96 Detail specification for simplex and duplex cables for use in cords for controlled environment | |
| Optical fibre cables \x96 Part 2: Indoor cables \x96 Sectional specification | |
| Optical fibre cables \x96 Part 3-10: Outdoor cables \x96 Family specification for duct, directly buried and lashed aerial optical telecommunication cables | |
| Optical fibre cables \x96 Part 3-20: Outdoor cables \x96 Family specification for self-supporting aerial telecommunication cables | |
| Optical fibre cables \x96 Part 3-40: Outdoor cables \x96 Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers | |
| Optical fibre cables \x96 Part 3-50: Outdoor cables \x96 Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes | |
| Optical fibre cables \x96 Part 3-60: Outdoor cables \x96 Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/flo ating in drinking water pipes | |
| Optical fibre cables \x96 Part 3-70: Outdoor cables \x96 Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Optical fibre cables \x96 Part 3: Sectional specification \x96 Outdoor cables | |
| Optical fibre cables \x96 Part 4-10: Aerial optical cables along electrical power lines \x96 Family specification for OPGW (Optical Ground Wires) | |
| Optical fibre cables \x96 Part 4-20: Aerial optical cables along electrical power lines \x96 Family specification for ADSS (All Dielectric Self Supported) optical cables | |
| Optical fibre cables \x96 Part 4: Sectional specification \x96 Aerial optical cables along electrical power lines | |
| Optical fibre cables \x96 Part 5: Sectional specification \x96 Microduct cabling for installation by blowing | |
| Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry | |
| Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry | |
| Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test | |
| Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth | |
| Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion | |
| Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter | |
| Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance | |
| Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay | |
| Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation | |
| Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres | |
| Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres | |
| Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres | |
| Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres | |
| Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres | |
| Optical fibres - Part 2: Product specifications - General | |
| Optical fibres \x96 Part 1-1: Measurement methods and test procedures \x96 General and guidance | |
| Optical fibres \x96 Part 1-20: Measurement methods and test procedures \x96 Fibre geometry | |
| Optical fibres \x96 Part 1-22: Measurement methods and test procedures \x96 Length measurement | |
| Optical fibres \x96 Part 1-31: Measurement methods and test procedures \x96 Tensile strength | |
| Optical fibres \x96 Part 1-32: Measurement methods and test procedures \x96 Coating strippability | |
| Optical fibres \x96 Part 1-33: Measurement methods and test procedures \x96 Stress corrosion susceptibility | |
| Optical fibres \x96 Part 1-34: Measurement methods and test procedures \x96 Fibre curl | |
| Optical fibres \x96 Part 1-40: Measurement methods and test procedures \x96 Attenuation | |
| Optical fibres \x96 Part 1-43: Measurement methods and test procedures \x96 Numerical aperture | |
| Optical fibres \x96 Part 1-44: Measurement methods and test procedures \x96 Cut-off wavelength | |
| Optical fibres \x96 Part 1-47: Measurement methods and test procedures \x96 Macrobending loss | |
| Optical fibres \x96 Part 1-48: Measurement methods and test procedures \x96 Polarization mode dispersion | |
| Optical fibres \x96 Part 1-50: Measurement methods and test procedures \x96 Damp heat (steady state) | |
| Optical fibres \x96 Part 1-60: Measurement methods and test procedures \x96 Beat length | |
| Optical fibres \x96 Part 1-61: Measurement methods and test procedures \x96 Polarization crosstalk | |
| Optical fibres \x96 Part 2-50: Product specifications \x96 Sectional specification for class B single-mode fibres | |
| Optical fibres \x96 Part 2-70: Product specifications \x96 Sectional specification for polarization-maintai ning fibres | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations | |
| Passive filter units for electromagnetic interference suppression - Part 1: Generic specification | |
| Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate | |
| Passive filter units for electromagnetic interference suppression -- Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements | |
| Passive filter units for electromagnetic interference suppression \x96 Part 3: Passive filter units for which safety tests are appropriate | |
| Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| Photovoltaic devices \x96 Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices | |
| Photovoltaic devices \x96 Part 10: Methods of linearity measurement | |
| Photovoltaic devices \x96 Part 1: Measurement of photovoltaic current-voltage characteristics | |
| Photovoltaic devices \x96 Part 2: Requirements for reference solar devices | |
| Photovoltaic devices \x96 Part 4: Reference solar devices \x96 Procedures for establishing calibration traceability | |
| Photovoltaic devices \x96 Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| Photovoltaic devices \x96 Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices \x96 Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices | |
| Photovoltaic devices \x96 Part 8: Measurement of spectral response of a photovoltaic (PV) device | |
| Photovoltaic devices \x96 Part 9: Solar simulator performance requirements | |
| Photovoltaic devices \x96 Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Pre-recorded optical reflective videodisk system - "Laser-Vision" 50 Hz/625 lines - PAL | |
| Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors | |
| Radiation protection instrumentation \x96 Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation \x96 Part 2: High range beta and photon dose and dose... | |
| Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies - Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors | |
| Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) | |
| Radio frequency and coaxial cable assemblies \x96 Part 1: Generic specification \x96 General requirements and test methods | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-4: Detail specification for cable assemblies for radio and TV receivers \x96 Frequency range 0 MHz to 3 000 MHz, IEC 61169-2... | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-5: Detail specification for cable assemblies for radio and TV receivers \x96 Frequency range 0 MHz to 1 000 MHz, IEC 61169-2... | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-6: Detail specification for cable assemblies for radio and TV receivers \x96 Frequency range 0 MHz to 3 000 MHz, IEC 61169-24... | |
| Radio frequency and coaxial cable assemblies \x96 Part 2-7: Detail specification for cable assemblies for radio and TV receivers \x96 Frequency range 0 MHz to 3 000 MHz, IEC 61169-47... | |
| Radio frequency and coaxial cable assemblies \x96 Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 3: Sectional specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies \x96 Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines | |
| Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines | |
| Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Safety of laser products - Part 1: Equipment classification and requirements | |
| Safety of laser products \x96 Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products \x96 Part 1: Equipment classification and requirements | |
| Safety of laser products \x96 Part 2: Safety of optical fibre communication systems (OFCS) | |
| Safety of laser products \x96 Part 4: Laser guards | |
| Self-ballasted fluorescent lamps for general lighting services - Safety requirements | |
| Self-ballasted lamps for general lighting services - Performance requirements | |
| Self-ballasted lamps for general lighting services - Safety requirements | |
| Self-ballasted lamps for general lighting services \x96 Safety requirements | |
| Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods | |
| Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth | |
| Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General | |
| Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV \x96 Part 1: General \x96 Performance, testing and rating \x96... | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV \x96 Part 2: Ageing test and destruction test | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV Part 1: General \x96 Performance, testing and rating \x96 Safety... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V \x96 Part 2: Ageing test, self-healing test and destruction... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV \x96 Part 1: General \x96 Performance, testing and rating \x96... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV Part 1: General \x96 Performance, testing and rating \x96 Safety... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V \x96 Part 1: General \x96 Performance, testing and rating \x96... | |
| Shunt-power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 Kv \x96 Part 3: Internal fuses | |
| Single-capped fluorescent lamps - Performance requirements | |
| Single-capped fluorescent lamps - Performance specifications | |
| Single-capped fluorescent lamps \x96 Performance specifications | |
| Sleeves of insulating material for live working | |
| Specifications for unused silicone insulating liquids for electrotechnical purposes | |
| Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests | |
| Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test | |
| Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use | |
| Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines | |
| Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) | |
| Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks | |
| Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment | |
| Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles | |
| Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section one: Transmission frame formats | |
| Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol | |
| Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations. Functional profile for providing the TASE.1 application service in end systems | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO and ITU-T recommendations - Section 501: TASE.1 service definitions | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO and ITU-T recommendations - Section 502: TASE.1 protocol definitions | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4) | |
| Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional Profile for providing the Connection-Oriented Transport Service in an End... | |
| Telecontrol equipment and systems \x96 Part 2: Operating conditions \x96 Section 1: Power supply and electromagnetic compatibility | |
| Telecontrol equipment and systems \x96 Part 5-104: Transmission protocols \x96 Network access for IEC 60870-5-101 using standard transport profiles | |
| Telecontrol equipment and systems \x96 Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations \x96 Functional profile for providing the Tase.2-application service in end systems | |
| Telecontrol equipment and systems \x96 Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations \x96 TASE.2 Object models | |
| Telecontrol equipment and systems \x96 Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations \x96 TASE.2. Object models | |
| Teleprotection equipment of power systems - Performance and testing - Part 1: Command systems | |
| Tin and tin alloys - Ingot tin | |
| Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation | |
| Transmitters for use in industrial-process control systems \x96 Part 2: Methods for inspection and routine testing | |
| Transmitters for use in industrial-process control systems \x96 Part 3: Methods for performance evaluation of intelligent transmitters | |
| Winding wires - Test methods - Part 2: Determination of dimensions | |
| Winding wires - Test methods - Part 5: Electrical properties | |
| Winding wires - Test methods - Part 6: Thermal properties | |
| Winding wires \x96 Test methods \x96 Part 3: Mechanical properties | |
| Winding wires \x96 Test methods \x96 Part 4: Chemical properties | |
| Winding wires \x96 Test methods \x96 Part 5: Electrical properties |
| << Prev | Next >> |