Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
320
330
340
350
360
370
372
373
374
375
376
377
378
379
380
381
382
383
384
390
400
410
420
430
440
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces | |
| Addressing Part 2: Assigning and maintaining addresses for objects in the physical world | |
| Addressing Part 4: International postal address components and template language | |
| Aerosol drug delivery device design verification - Requirements and test methods | |
| Anaesthetic and respiratory equipment \x97 Fire-activated oxygen shut-off devices for use during oxygen therapy | |
| Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Hexane Extraction | |
| Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils | |
| Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper | |
| Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements | |
| Binders for paints and varnishes \x97 Gum rosin \x97 Gas-chromatographic analysis | |
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels | |
| Building construction machinery and equipment Portable hand-held, internal combustion engine driven cut-off machines Safety | |
| Coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization | |
| Conveyor belts - Drum friction testing | |
| Cosmetics - Sun protection test methods - Percentage of water resistance | |
| Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode | |
| Dentistry - Designation system for dental implants | |
| Dentistry - Machinable ceramic blanks | |
| Dentistry - Manual toothbrushes - General requirements and test methods | |
| Dentistry - Orthodontic anchor screws | |
| Dentistry - Sinus membrane elevator | |
| Dentistry - Vocabulary of process chain for CAD/CAM systems | |
| Dentistry - Vocabulary | |
| Dentistry \x96 Interoperability of CAD/ CAM systems | |
| Dentistry \x97 Filling instrument with contra angle | |
| Dentistry Powered toothbrushes General requirements and test methods | |
| Dentistry- Manual toothbrushes - General requirements and test methods | |
| Determination of the resistance to cryogenic spill of insulation materials Part 2: Vapour exposure | |
| Determination of the resistance to cryogenic spillage of insulation materials Part 1: Liquid phases | |
| Determination of the resistance to cryogenic spillage of insulation materials Part 3: Jet release | |
| Earth-moving machinery - Functional safety Part 1: Methodology to determine safety-related parts of the control system and performance requirements | |
| Earth-moving machinery - Functional safety Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system | |
| Earth-moving machinery \x96 Functional safety Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system | |
| Earth-moving machinery \x97 Functional safety Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system | |
| Electrically propelled road vehicles - Magnetic field wireless power transfer - Safety and interoperability requirements | |
| Electronic fee collection - Security framework | |
| Enterprise integration - Constructs for enterprise modelling | |
| Enterprise integration - Framework for enterprise modelling | |
| Equipment for crop protection \x97 Knapsack sprayers Part 2: Test methods (ISO 19932-2:2013) | |
| Equipment for crop protection \x97 Knapsack sprayers Part 2: Test methods | |
| Equipment for crop protection \x97 Knapsack sprayers Part 3: Inspection of knapsack sprayers in use | |
| Eye and face protection \x96 Guidance on selection, use and maintenance | |
| Eye and face protection \x97 Protection against laser radiation Part 1: Requirements and test methods | |
| Fasteners - Terminology Part 2: Vocabulary and definitions for coatings | |
| Fasteners - Vocabulary Part 4: Control, inspection, delivery, acceptance and quality | |
| Fasteners \x97 Terminology Part 2: Vocabulary and definitions for coatings | |
| Fibre ropes \x97 Polyethylene \x97 3- and 4-strand ropes | |
| Fibre ropes and cordage - Vocabulary | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by flash method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of the resistance to crack propagation by notch... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x97 Determination of elastic properties by ultrasonic technique | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Thermophysical properties of ceramic composites \x97 Determination of specific heat capacity | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of absolute density of ceramic powders by pyknometer | |
| Footwear - Critical substances potentially present in footwear and footwear components - Determination of Nitrosamines | |
| Footwear - Test methods for heels and top pieces - Top piece retention strength | |
| Footwear - Test methods for whole shoe - Washability in a domestic washing machine | |
| Footwear - Vocabulary | |
| Footwear \x96 Test methods for shanks \x96 Fatigue resistance | |
| Footwear \x97 Test methods for heels \x97 Fatigue resistance | |
| Footwear \x97 Test methods for heels \x97 Resistance to lateral impact | |
| Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test) | |
| Footwear and footwear components \x96 Quantitative challenge test method to assess antifungal activity | |
| Footwear sizing - In-shoe measurement Part 1: Shoe length | |
| Footwear Test methods for heels Heel pin holding strength | |
| Friction stir spot welding - Aluminium Part 3: Qualification of welding personnel | |
| Friction stir spot welding - Aluminium Part 5: Quality and inspection requirements | |
| Friction stir spot welding \x97 Aluminium Part 1: Vocabulary | |
| Friction stir spot welding \x97 Aluminium Part 2: Design of weld joints | |
| Friction stir spot welding \x97 Aluminium Part 4: Specification and qualification of welding procedures | |
| Geographic information - Classification systems Part 1: Classification system structure | |
| Geographic information - Classification systems Part 2: Land Cover Meta Language (LCML) | |
| Geographic information - Conceptual schema language | |
| Geographic information - Core profile of the spatial schema | |
| Geographic information - Cross-domain vocabularies | |
| Geographic information - Data product specifications | |
| Geographic information - Data quality Part 1: General requirements | |
| Geographic information - Feature concept dictionaries and registers | |
| Geographic information - Filter encoding | |
| Geographic information - Geography Markup Language (GML) Part 2: Extended schemas and encoding rules | |
| Geographic information - Geography Markup Language (GML) | |
| Geographic information - Geospatial API for features Part 1: Core | |
| Geographic information - Geospatial API for features Part 2: Coordinate Reference Systems by Reference | |
| Geographic information - Indoor feature model | |
| Geographic information - Land Administration Domain Model (LADM) Land registration | |
| Geographic information - Land Administration Domain Model (LADM) Marine georegulation | |
| Geographic information - Land Administration Domain Model (LADM) Part 1: Generic conceptual model | |
| Geographic information - Land Administration Domain Model (LADM) Part 4: Valuation information | |
| Geographic information - Land Administration Domain Model (LADM) | |
| Geographic information - Linear referencing | |
| Geographic information - Location-based services - Multimodal routing and navigation | |
| Geographic information - Location-based services - Reference model | |
| Geographic information - Location-based services - Tracking and navigation | |
| Geographic information - Metadata Part 1: Fundamentals | |
| Geographic information - Metadata Part 2: Extensions for acquisition and processing | |
| Geographic information - Metadata Part 2: Extensions for imagery and gridded data | |
| Geographic information - Metadata Part 3: XML schema implementation for fundamental concepts | |
| Geographic information - Methodology for feature cataloguing | |
| Geographic information - Ontology Part 6: Service ontology register | |
| Geographic information - Portrayal | |
| Geographic information - Positioning services | |
| Geographic information - Procedures for item registration Part 1: Fundamentals | |
| Geographic information - Procedures for item registration | |
| Geographic information - Profiles | |
| Geographic information - Quality principles | |
| Geographic information - Referencing by coordinates | |
| Geographic information - Rules for application schema | |
| Geographic information - Schema for coverage geometry and functions Part 1: Fundamentals | |
| Geographic information - Schema for coverage geometry and functions Part 3: Processing fundamentals | |
| Geographic information - Schema for coverage geometry and functions | |
| Geographic information - Schema for moving features | |
| Geographic information - Services | |
| Geographic information - Spatial referencing by coordinates Part 2: Extension for parametric values | |
| Geographic information - Spatial schema | |
| Geographic information - Web Feature Service | |
| Geographic information - Web map server interface | |
| Geographic information \x96 Geography Markup Language (GML) Part 1: Fundamentals | |
| Geographic information \x97 Data quality | |
| Geographic information \x97 Land Administration Domain Model (LADM) Part 5: Spatial plan information | |
| Geographic information \x97 Observations and measurements | |
| Geographic information \x97 Reference model Part 1: Fundamentals | |
| Geographic information \x97 Training data markup language for artificial intelligence Part 1: Conceptual model | |
| Geographic information Conformance and testing | |
| Geographic information Encoding | |
| Geographic information Metadata | |
| Geographic information Positioning services | |
| Geographic information Quality evaluation procedures | |
| Geographic information Reference model | |
| Geographic information Services | |
| Geographic information Simple feature access Part 1: Common architecture | |
| Geographic information Simple feature access Part 2: SQL option | |
| Geographic information Spatial referencing by coordinates | |
| Geographic information Spatial referencing by geographic identifiers | |
| Geographic information Temporal schema | |
| Geometrical product specifications (GPS) \x96 Decomposition of geometrical characteristics for manufacturing control | |
| Geometrical product specifications (GPS) \x97 Dimensional measuring equipment Part 1: Plain limit gauges of linear size | |
| Geometrical product specifications (GPS) \x97 Dimensional measuring equipment Part 2: Reference disk gauges | |
| Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation Part 3: Measurement of displacements across a line: Inclinometers | |
| Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation Part 8: Measurement of loads: Load cells | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation Part 4: Measurement of pore water pressure: Piezometers | |
| Geotechnical investigation and testing \x97 Geotechnical monitoring by field instrumentation Part 1: General rules | |
| Geotechnical investigation and testing \x97 Geotechnical monitoring by field instrumentation Part 2: Measurement of displacements along a line: Extensometers | |
| Geotechnical investigation and testing \x97 Geotechnical monitoring by field instrumentation Part 3: Measurement of displacements across a line: Inclinometers | |
| Geotechnical investigation and testing \x97 Geotechnical monitoring by field instrumentation Part 5: Stress change measurements by total pressure cells (TPC) | |
| Guidance for gamma spectrometry measurement of radioactive waste | |
| Guidelines for quality and/or environmental management systems auditing. A5 laminated edition | |
| Guidelines for quality and/or environmental management systems auditing | |
| Health informatics \x97 Clinical analyser interfaces to laboratory information systems \x97 Use profiles | |
| In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology | |
| Installation and equipment for liquefied natural gas - Design of floating LNG installations Part 1: General requirements | |
| Installation and equipment for liquefied natural gas \x97 Design of floating LNG installations Part 2: Specific FSRU issues | |
| Intelligent transport systems - Co-operative ITS - Local dynamic map | |
| Leather - Measurement of leather surface - Using electronic techniques | |
| Leather \x97 Chemical determination of N-methyl-2- pyrrolidone (NMP) in leather | |
| Leather \x97 Chemical tests \x97 Determination of chromium (VI) and the reductive potential for chromium tanning agents | |
| Leather \x97 Chemical tests \x97 Guidelines for testing critical chemicals in leather | |
| Leather \x97 Determination of degradability by micro-organisms | |
| Leather \x97 Physical and mechanical tests \x97 Determination of water absorption by capillary action (wicking) | |
| Lung ventilators and related equipment - Vocabulary and semantics | |
| Machinery for forestry - Winches Part 2: Traction aid winches | |
| Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting | |
| Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry | |
| Measurement of radioactivity \x97 Gamma-ray emitting radionuclides \x97 Generic test method using gamma-ray spectrometry | |
| Measurement of radioactivity in the environment - Air: aerosols - Test method using sampling by filter media | |
| Measurement of radioactivity in the environment - Soil Part 4: Plutonium 238 and plutonium 239 + 240 - Test method using alpha spectrometry | |
| Measurement of radioactivity in the environment - Soil Part 5: Strontium 90 - Test method using proportional counting or liquid scintillation counting | |
| Measurement of radioactivity in the environment - Soil Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting | |
| Measurement of radioactivity in the environment \x97 Soil Part 7: In situ measurement of gamma-emitting radionuclides | |
| Measurement of the radioactivity in the environment - Air: tritium - Test method using bubbler sampling | |
| Medical devices for conserving oxygen and oxygen mixtures Particular requirements | |
| Memorandum on the Standardization of the Programming Language COBOL | |
| Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment | |
| Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections | |
| Microbiology of the food chain - Detection and quantification of histamine in fish and fishery products - HPLC method | |
| Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method | |
| Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations | |
| Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs | |
| Microbiology of the food chain - Horizontal methods for surface sampling | |
| Microbiology of the food chain \x97 Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits | |
| Microbiology of the food chain \x97 Detection of Trichinella larvae in meat by artificial digestion method | |
| Mining - Mobile machines working underground - Machine safety | |
| Molecular in vitro diagnostic examinations - Specifications for pre- examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examinations processes for formalin-fixed and paraffin-embedded (FFPE) tissue Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood Part 1: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood Part 2: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations \x97 Specifications for pre-examination processes for frozen tissue Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations \x97 Specifications for preexamination processes for formalin-fixed and paraffin-embedded (FFPE) tissue Part 4: In situ detection techniques | |
| Molecular in-vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood Part 3: Isolated circulating cell free DNA from plasma | |
| Monolithic (unshaped) refractor products - Part 3: Characterization as received | |
| Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables | |
| Monolithic (unshaped) refractory products Part 1: Introduction and classification | |
| Monolithic (unshaped) refractory products Part 2: Sampling for testing | |
| Monolithic (unshaped) refractory products Part 5: Preparation and treatment of test pieces | |
| Monolithic (unshaped) refractory products Part 6: Measurement of physical properties | |
| Monolithic (unshaped) refractory products Part 7: Tests on pre-formed shapes | |
| Monolithic (unshaped) refractory products Part 8: Determination of complementary properties | |
| Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity | |
| Nanotechnologies \x97 Measurements of particle size and shape distributions by scanning electron microscopy | |
| Natural gas - Determination of sulfur compounds using gas chromatography | |
| Non-destructive testing \x97 Image quality of radiographs Part 1: Determination of the image quality value using wire-type image quality indicators | |
| Non-destructive testing \x97 Image quality of radiographs Part 2: Determination of the image quality value using step/hole-type image quality indicators | |
| Non-destructive testing \x97 Image quality of radiographs Part 3: Image quality classes | |
| Non-destructive testing \x97 Image quality of radiographs Part 4: Experimental evaluation of image quality values and image quality tables | |
| Non-destructive testing \x97 Image quality of radiographs Part 5: Determination of the image unsharpness value using duplex wiretype image quality indicators | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Specification for a calibration block for phased array testing (PAUT) | |
| Non-destructive testing of welds \x97 Phased array ultrasonic testing (PAUT) \x97 Acceptance levels | |
| Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals | |
| Oil and gas industries including lower carbon energy - Site-specific assessment of mobile offshore units Part 1: Jack-ups: elevated at a site | |
| Ophthalmic instruments Corneal topographers | |
| Ophthalmic optics \x97 Contact lenses \x97 Hygienic management of multipatient use trial contact lenses | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling Part 1: Concepts and principles | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling Part 2: Delivery phase of the assets... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling Part 6: Health and safety information | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x97 Information management using building information modelling Part 3: Operational phase of the assets... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x97 Information management using building information modelling Part 4: Information exchange | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x97 Information management using building information modelling Part 5: Security-minded approach to information management... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Concepts and principles | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Delivery phase of the assets | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Operational phase of the assets. Security-minded approach to... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling | |
| Paints and varnishes - Determination of the film thickness of coatings using an ultrasonic gauge | |
| Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) | |
| Paints and varnishes - Wettability Part 1: Terminology and general principles | |
| Paints and varnishes - Wettability Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle | |
| Paints and varnishes - Wettability Part 3: Determination of the surface tension of liquids using the pendant drop method | |
| Paints and varnishes - Wettability Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a... | |
| Paints and varnishes - Wettability Part 6: Measurement of dynamic contact angle | |
| Paints and varnishes \x96 Determination of pH value Part 1: pH electrodes with glass membrane | |
| Paints and varnishes \x96 Wettability Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) | |
| Paints and varnishes \x97 Determination of image clarity (degree of sharpness of reflected or transmitted image) | |
| Paints and varnishes \x97 Determination of pH value Part 2: pH electrodes with ISFET technology | |
| Paints and varnishes \x97 Wettability Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension | |
| Paper - Determination of tearing resistance - Elmendorf method | |
| Paper and Board - Determination of Tensile Properties Part 2: Constant Rate of Elongation Method | |
| Paper and board - Sampling to determine average quality | |
| Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| Petroleum and natural gas industries - Arctic offshore structures | |
| Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components | |
| Petroleum and natural gas industries - Fixed concrete offshore structures | |
| Petroleum and natural gas industries - Fixed steel offshore structures | |
| Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars | |
| Petroleum and natural gas industries - General requirements for offshore structures | |
| Petroleum and natural gas industries - Site-specific assessment of mobile offshore units Part 1: Jack-ups | |
| Petroleum and natural gas industries - Site-specific assessment of mobile offshore units Part 3: Floating unit | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria | |
| Petroleum and natural gas industries - Specific requirements for offshore structures Part 10: Marine geophysical investigations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures Part 3: Topsides structure | |
| Petroleum and natural gas industries - Specific requirements for offshore structures Part 6: Marine operations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures Part 8: Marine soil investigations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures Part 9: Structural integrity management | |
| Petroleum and natural gas industries \x97 Modular drilling rigs for offshore fixed platforms | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction | |
| Petroleum and natural gas industries Specific requirements for offshore structures Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units | |
| Petroleum and natural gas industry - Pipeline transportation systems - Geological hazards risk management for onshore pipeline | |
| Petroleum and natural gas industry - Pipeline transportation systems - Pipeline integrity management specification Part 2: Full-life cycle integrity management for offshore pipeline | |
| Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings Part 2: Maintenance and field repair coatings for riser pipes | |
| Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation | |
| Petroleum, petrochemical and natural gas industries \x97 External corrosion protection of risers by coatings and linings Part 1: Elastomeric coating systems - polychloroprene or EPDM | |
| Petroleum, petrochemicals and natural gas industries - Internal coating and lining of carbon steel process vessels Part 1: Technical requirements | |
| Plastics - Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylenediene)- styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styren e (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of proper | |
| Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes | |
| Plastics - Decorative solid surfacing materials Part 1: Classification and specifications | |
| Plastics - Decorative solid surfacing materials Part 2: Determination of properties - Sheet goods | |
| Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer | |
| Plastics - Methyl methacrylate-acrylon itrile-butadienestyr ene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation | |
| Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polyamide (PA) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications | |
| Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications | |
| Plastics - Polypropylene (PP) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Styrene/acrylonitril e (SAN) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specification | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface \x96 Method by analysis of evolved carbon dioxide | |
| Plastics \x96 Styrene-acrylonitril e (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x97 Acrylonitril-estyren e- acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x97 Methyl methacrylate-acrylon itrile-butadiene-sty rene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | |
| Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling | |
| Plastics piping systems \x96 Thermoplastics pipes and fittings for hot and cold water \x96 Test method for the resistance of joints to pressure cycling | |
| Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials | |
| Protective clothing for firefighters - Physiological impact Part 1: Measurement of coupled heat and moisture transfer with the sweating torso | |
| Protective clothing for firefighters - Physiological impact Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters | |
| Protective clothing for firefighters \x96 Physiological impact Part 1: Measurement of coupled heat and moisture transfer with the sweating torso | |
| Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test methods | |
| Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear... | |
| Quality management systems \x97 Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear... | |
| Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides | |
| Radiological protection \x96 Performance criteria for service laboratories performing biological dosimetry by cytogenetics | |
| Radiological protection \x97 Performance criteria for laboratories using Fluorescence In Situ Hybridization (FISH) translocation assay for assessment of exposure to ionizing radiation | |
| Rail systems for supporting medical equipment | |
| Railway applications - Heating, ventilation and air conditioning systems for rolling stock Part 1: Terms and definitions | |
| Refractory products \x97 Determination of refractoriness under load \x97 Differential method with rising temperature | |
| Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns | |
| Reinforcement Fibres - Sampling Plans Applicable to Received Batches | |
| Reinforcement Yarns - Determination of Linear Density | |
| Reinforcement Yarns - Determination of Twist | |
| Repair of flat wooden pallets | |
| Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material | |
| Resistance welding - Destructive testing of welds - Method for the fatigue testing of multispot-welded specimens | |
| Resistance welding - Locking tapers for electrode holders and electrode caps | |
| Resistance welding \x97 Spot welding of aluminium and aluminium alloys \x97 Weldability, welding and testing | |
| Respiratory equipment Infant monitors Particular requirements | |
| Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification | |
| Safety of machinery - Fire prevention and fire protection | |
| Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials | |
| Simultaneous interpreting \x96 Quality and transmission of sound and image input \x96 Requirements | |
| Simultaneous interpreting \x97 Equipment \x97 Requirements | |
| Slotted countersunk flat head screws - Product grade A | |
| Slotted raised countersunk head screws - Product grade A | |
| Sludge recovery, recycling, treatment and disposal - Requirements and recommendations for the operation of anaerobic digestion facilities | |
| Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions | |
| Small craft \x97 Electric navigation lights \x97 Performance of LED lights | |
| Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants | |
| Soil quality - Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials | |
| Soil quality - Guidance on the determination of background values | |
| Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates | |
| Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach) | |
| Solid biofuels - Determination of self-heating of pelletized biofuels Part 1: Isothermal calorimetry | |
| Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications | |
| Solid biofuels \x96 Safe handling and storage of solid biofuel pellets in commercial and industrial applications | |
| Solid biofuels \x97 Determination of content of heavy extraneous materials larger than 3,15 mm | |
| Solid biofuels \x97 Determination of fines content in quantities of pellets | |
| Solid biofuels \x97 Determination of particle density of pellets and briquettes | |
| Standard cost coding system for oil and gas production and processing facilities | |
| Textile Fibres - Determination of Linear Density - Gravimetric Method and Vibroscope Method | |
| Tracked Changes (Redline) - Addressing \x97 Part 4: International postal address components and template language | |
| Tracked Changes (Redline) - Dentistry - Manual toothbrushes - General requirements and test methods | |
| Tracked Changes (Redline) - Dentistry - Physical properties of powered toothbrushes | |
| Tracked Changes (Redline) - Dentistry - Sinus membrane elevator | |
| Tracked Changes (Redline) - Dentistry \x97 Interoperability of CAD/CAM Systems | |
| Tracked Changes (Redline) - Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements | |
| Tracked Changes (Redline) - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Thermophysical properties of ceramic composites \x97 Determination of specific heat capacity | |
| Tracked Changes (Redline) - Footwear - Test methods for heels - Heel pin holding strength | |
| Tracked Changes (Redline) - Footwear - Vocabulary | |
| Tracked Changes (Redline) - Geographic information - Conceptual schema language | |
| Tracked Changes (Redline) - Geographic information - Conformance and testing | |
| Tracked Changes (Redline) - Geographic information - Cross-domain vocabularies | |
| Tracked Changes (Redline) - Geographic information - Data quality - Part 1: General requirements | |
| Tracked Changes (Redline) - Geographic information - Feature concept dictionaries and registers | |
| Tracked Changes (Redline) - Geographic information - Geospatial API for features - Part 1: Core | |
| Tracked Changes (Redline) - Geographic information - Land Administration Domain Model (LADM) - Part 4: Valuation information | |
| Tracked Changes (Redline) - Geographic information - Linear referencing | |
| Tracked Changes (Redline) - Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts | |
| Tracked Changes (Redline) - Geographic information - Metadata Part 2: Extensions for acquisition and processing | |
| Tracked Changes (Redline) - Geographic information - Methodology for feature cataloguing | |
| Tracked Changes (Redline) - Geographic information - Observations, measurements and samples | |
| Tracked Changes (Redline) - Geographic information - Positioning services | |
| Tracked Changes (Redline) - Geographic information - Procedures for item registration Part 1: Fundamentals | |
| Tracked Changes (Redline) - Geographic information - Rules for application schema | |
| Tracked Changes (Redline) - Geographic information - Services | |
| Tracked Changes (Redline) - Geographic information \x97 Data product specifications | |
| Tracked Changes (Redline) - Geographic information \x97 Land Administration Domain Model (LADM) \x97 Land registration | |
| Tracked Changes (Redline) - Geographic information \x97 Land Administration Domain Model (LADM) \x97 Marine georegulation | |
| Tracked Changes (Redline) - Geographic information \x97 Land Administration Domain Model (LADM) \x97 Part 1: Generic conceptual model | |
| Tracked Changes (Redline) - Geographic information \x97 Land Administration Domain Model (LADM) \x97 Part 5: Spatial plan information | |
| Tracked Changes (Redline) - Geographic information \x97 Schema for coverage geometry and functions \x97 Part 1: Fundamentals | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x97 Standard reference temperature for the specification of geometrical and dimensional properties | |
| Tracked Changes (Redline) - Guidelines for auditing management systems | |
| Tracked Changes (Redline) - Intelligent transport systems - Cooperative ITS - Local dynamic map | |
| Tracked Changes (Redline) - Leather - Chemical tests - Guidelines for testing critical chemicals in leather | |
| Tracked Changes (Redline) - Leather \x97 Measurement of leather surface \x97 Electronic techniques | |
| Tracked Changes (Redline) - Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry | |
| Tracked Changes (Redline) - Measurement of radioactivity \x97 Determination of beta emitters activities \x97 Test method using liquid scintillation counting | |
| Tracked Changes (Redline) - Metallic tube connections for fluid power and general use \x97 Test methods for hydraulic fluid power connections | |
| Tracked Changes (Redline) - Molecular in vitro diagnostic examinations \x97 Specifications for pre-examination processes for frozen tissue \x97 Part 3: Isolated DNA | |
| Tracked Changes (Redline) - Non-destructive testing \x96 Image quality of radiographs Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Image quality of radiographs \x97 Part 3: Minimum image quality values | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy - Offshore structures - Part 8: Marine soil investigations | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Specific requirements for offshore structures \x97 Part 3: Topsides structure | |
| Tracked Changes (Redline) - Ophthalmic instruments - Corneal topographers | |
| Tracked Changes (Redline) - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x97 Information management using building information modelling - Part 4:... | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of pH value Part 1: pH sensors with glass membrane | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of the film thickness of coatings using an ultrasonic gauge | |
| Tracked Changes (Redline) - Paints and varnishes - Wettability - Part 1: Vocabulary and general principles | |
| Tracked Changes (Redline) - Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle | |
| Tracked Changes (Redline) - Paints and varnishes - Wettability - Part 6: Measurement of dynamic advancing and receding angle by changing the volume of a drop | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Determination of pH value \x97 Part 2: pH sensors with ISFET technology | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Wettability \x97 Part 3: Determination of the surface tension of liquids using the pendant drop method | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Wettability \x97 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Wettability \x97 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on... | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Wettability \x97 Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage | |
| Tracked Changes (Redline) - Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Floating offshore structures Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 10: Marine geophysical investigations | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Specific requirements for offshore structures Part 5: Weight control during engineering and construction | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x96 General requirements for offshore structures | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x96 Specific requirements for offshore structures Part 2: Seismic design procedures and criteria | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x97 Site-specific assessment of mobile offshore units Part 1: Jack-ups | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x97 Specific requirements for offshore structures Part 1: Metocean design and operating considerations | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x97 Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations | |
| Tracked Changes (Redline) - Plastics - Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Tracked Changes (Redline) - Plastics - Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylenediene) - styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene) - styrene (ACS) moulding and extrusion materials Part 2: Preparation of test... | |
| Tracked Changes (Redline) - Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes | |
| Tracked Changes (Redline) - Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Tracked Changes (Redline) - Plastics - Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Tracked Changes (Redline) - Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Tracked Changes (Redline) - Plastics \x97 Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | |
| Tracked Changes (Redline) - Radiological protection \x97 Performance criteria for service laboratories performing biological dosimetry by cytogenetics \x97 Dicentric assay | |
| Tracked Changes (Redline) - Refractory test-piece preparation \x97 Gunning refractory panels by the pneumatic-nozzle mixing type guns | |
| Tracked Changes (Redline) - Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification | |
| Tracked Changes (Redline) - Safety of machinery \x96 Fire prevention and fire protection | |
| Tracked Changes (Redline) - Simultaneous interpreting \x97 Equipment \x97 Requirements | |
| Tracked Changes (Redline) - Soil quality - Guidance on the determination of background values | |
| Tracked Changes (Redline) - Solid biofuels \x97 Determination of particle density of pellets and briquettes | |
| Tracked Changes (Redline) - Water quality - Determination of the estrogenic potential of water and waste water - Part 3: In vitro human cell-based reporter gene assay | |
| Tracked Changes (Redline) - Water quality \x97 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic... | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 12: Tenoning-profiling machines | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 14: Four-sided moulding machines | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 16: Table band saws and band re-saws | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 17: Edge banding machines fed by chains | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines | |
| Tracked Changes (Redline) - Woodworking machines - Safety - Part 5: Dimension saws | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 11: Combined machines | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 1: Common requirements | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 3: Numerically controlled (NC/CNC) boring and routing machines | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 6: Single spindle vertical moulding machines (toupie) | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 8: Wide belt sanding machines and surface treating machines | |
| Tracked Changes (Redline) - Woodworking machines \x97 Safety \x97 Part 9: Circular saw benches (with and without sliding table) | |
| Transportable liquid oxygen systems for medical use Particular requirements | |
| Underground mining machines \x97 Mobile extracting machines at the face \x97 Safety requirements for shearer loaders and plough systems | |
| Vegetable oils - Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with online-coupled high performance liquid chromatography gas chromatography-flame ionization detection (HPLC-GC-FID) analysis - Method... | |
| Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient | |
| Vitreous and porcelain enamels \x97 Terminology Part 1: Terms and definitions | |
| Vitreous and porcelain enamels \x97 Terminology Part 2: Visual representations and descriptions | |
| Water quality - Detection of Salmonella spp. | |
| Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation | |
| Water quality - Determination of selected phthalates using gas chromatography/ mass spectrometry | |
| Water quality - Determination of the estrogenic potential of water and waste water Part 1: Yeast estrogen screen (Saccharomyces cerevisiae) | |
| Water quality - Determination of the estrogenic potential of water and waste water Part 2: Yeast estrogen screen (A-YES, Arxula adeninivorans) | |
| Water quality - Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza - Method using a stock culture independent microbiotest | |
| Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test | |
| Water quality - Guidance on marine biological surveys of hard-substrate communities | |
| Water quality - Sampling for microbiological analysis | |
| Water quality \x97 Determination of dissolved chromium(VI) in water \x97 Photometric method | |
| Water quality \x97 Determination of dissolved perchlorate \x97 Method using ion chromatography (IC) | |
| Water quality \x97 Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter \x97 Method using gas chromatographymass spectrometry (GC-MS) and electron capture negative ionization (ECNI)... | |
| Water quality \x97 Determination of the estrogenic potential of water and waste water Part 3: In vitro human cell-based reporter gene assay | |
| Water quality \x97 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion | |
| Water quality Determination of selected alkylphenols Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection | |
| Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification | |
| Woodworking machines - Safety Part 14: Four-sided moulding machines | |
| Woodworking machines - Safety Part 15: Presses | |
| Woodworking machines - Safety Part 1: Common requirements | |
| Woodworking machines - Safety Part 2: Horizontal beam panel circular sawing machines | |
| Woodworking machines - Safety Part 4: Vertical panel circular sawing machines | |
| Woodworking machines - Safety Part 5: Dimension saws | |
| Woodworking machines - Safety Part 7: Surface planing, thickness planing, combined surface/thickness planing machines | |
| Woodworking machines - Safety Part 8: Belt sanding and calibrating machines for straight workpieces | |
| Woodworking machines - Safety Part 9: Circular saw benches (with and without sliding table) | |
| Woodworking machines \x96 Safety Part 10: Building site saws (contractor saws) | |
| Woodworking machines \x96 Safety Part 13: Multi-blade rip sawing machines with manual loading and/or unloading | |
| Woodworking machines \x96 Safety requirements Part 3: Numerically controlled (NC) boring and routing machines | |
| Woodworking machines \x97 Safety \x97 Part 4: Vertical panel circular sawing machines | |
| Woodworking machines \x97 Safety \x97 Part 7: Surface planing, thickness planing and combined surface/thickness planing machines | |
| Woodworking machines \x97 Safety Part 10: Building site saws (contractor saws) | |
| Woodworking machines \x97 Safety Part 11: Combined machines | |
| Woodworking machines \x97 Safety Part 12: Tenoning/profiling machines | |
| Woodworking machines \x97 Safety Part 16: Table band saws and band re-saws | |
| Woodworking machines \x97 Safety Part 17: Edge banding machines fed by chains | |
| Woodworking machines \x97 Safety Part 6: Single spindle vertical moulding machines ("toupies") | |
| Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury (I) Nitrate Test |
| << Prev | Next >> |