Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
357
358
359
360
361
362
363
364
365
366
367
368
369
370
380
390
400
410
420
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Solvent- Borne and Solvent-Free Adhesives - Determination of Flashpoint | |
| Adhesives - Terms and Definitions | |
| Admixtures for Concrete, Mortar and Grout - Part 4: Admixtures for Grout for Prestressing Tendons - Definitions, Requirements and Conformity | |
| Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for Concrete, Mortar and Grout - Part 6: Sampling, Conformity Control, Evaluation of Conformity, Marking and Labelling | |
| Admixtures for concrete, mortar and grout \x97 Part 1: Common requirements | |
| Admixtures for Concrete, Mortar and Grout Part 2: Concrete Admixtures - Definitions and Requirements | |
| Admixtures for concrete, mortar and grout Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout Part 3: Admixtures for masonry - mortar. Definitions, requirements, conformity and marking and labelling | |
| Admixtures for concrete, mortar and grout Part 3: Admixtures for masonry mortar Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout Part 7: Shrinkage reducing admixtures - Definitions, requirements, conformity, marking and labelling | |
| Aerospace series - Aerospace Operator Self-Verification Programs | |
| Aerospace series - Certificate of conformity requirements | |
| Aerospace series - Delegated Product Release Verification | |
| Aerospace series - Foreign Object Damage (FOD) Prevention Program - Requirements for Aviation, Space, and Defence Organizations | |
| Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes | |
| Aerospace series - General recommendation for the BIT Architecture in an integrated system | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 120: CAD 3D explicit geometry with graphic... | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 121: Semantic representation of CAD 3D Explicit... | |
| Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description "Retrieval" | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description "Removal" | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 004: Description methods | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 005: Authentication and Verification | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 007: Terms and References | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 100: Common concepts for Long term archiving... | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 125: Explicit CAD assembly structure with Graphic... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 200: Common Concepts for LOng Term Archiving... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 002: Requirements | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 110: CAD mechanical 3D Explicit geometry information | |
| Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description "Data preparation" | |
| Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description "Archival Storage" | |
| Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 012: Reference process description "Ingest" | |
| Aerospace series - Quality management systems - Assessment | |
| Aerospace series - Quality management systems - Non-deliverable software requirement | |
| Aerospace series - Quality management systems - Nonconformance documentation | |
| Aerospace series - Quality management systems Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs | |
| Aerospace series - Quality management systems Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Regist rations Programs | |
| Aerospace series - Quality management systems Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification | |
| Aerospace series - Quality management systems Part 1: Requirements for Certification of aviation, space, and defense | |
| Aerospace series - Quality management systems Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication | |
| Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies | |
| Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies | |
| Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process | |
| Aerospace series - Root cause analysis and problem solving (9S Methodology) | |
| Aerospace series \x96 LOTAR \x96 LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 115: Explicit CAD assembly structure | |
| Aerospace series \x96 Quality systems \x96 Record retention | |
| Aerospace series \x97 Architecture for integrated management of a system's health condition | |
| Aerospace series \x97 Industrialization \x97 Guidelines for establishing the manufacturing and inspection file and the associated justifications | |
| Aerospace series \x97 Management of unsalvageable items | |
| Aerospace series \x97 Notice of Change (NOC) Requirements | |
| Aerospace series \x97 Programme management \x97 Expression of need \x97 Guidance on and format for (Need) Technical Specification | |
| Aerospace series \x97 Programme Management \x97 General guidelines for acquisition and supply of open systems | |
| Aerospace series \x97 Programme management \x97 Guide for reliability control | |
| Aerospace series \x97 Programme Management \x97 Guide for the management of Systems Engineering | |
| Aerospace series \x97 Programme Management \x97 Guide for the risk management | |
| Aerospace series \x97 Programme management \x97 Guide to dependability and safety control | |
| Aerospace Series \x97 Quality Management Systems \x97 Statistical Product \x97 Acceptance Requirements | |
| Aerospace series Quality management systems Qualification procedure for aerospace standard parts | |
| Agricultural and Forestry Machinery - Centre Pivot and Moving Lateral Types Irrigation Machines - Safety | |
| Agricultural and Forestry Machinery - Reel Machines for Irrigation - Safety | |
| Agricultural and Forestry Machinery - Sprayers and Liquid Fertilizer Distributors - Safety | |
| Aluminium and Aluminium Alloys - Circle and Circle Stock for General Applications - Specifications | |
| Aluminium and Aluminium Alloys - Circle and Circle Stock for the Production of Culinary Utensils - Specifications | |
| Biological Systems for Testing Sterilizers and Sterilization Processes - Part 4: Particular Systems for Use in Irradiation Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes - Part 5: Particular Systems for Use in Low Temperature Steam and Formaldehyde Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes - Part 6: Particular Systems for Use in Dry Heat Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes - Part 7: Particular Requirements for Self-Contained Biological Indicator Systems for Use in Moist Heat Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes - Part 8: Particular Requirements for Self-Contained Biological Indicator Systems for Use in Ethylene Oxide Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes Part 1: General Requirements | |
| Biological Systems for Testing Sterilizers and Sterilization Processes Part 2: Particular Systems for Use in Ethylene Oxide Sterilizers | |
| Biological Systems for Testing Sterilizers and Sterilization Processes Part 3: Particular Systems for Use in Moist Heat Sterilizers | |
| Cast Iron Pipes and Fittings, Their Joints and Accessories for the Evacuation of Water from Buildings - Requirements, Test Methods and Quality Assurance | |
| Chemical Analysis of Refractory Products Part 2: Products Containing Silica and/or Alumina (Wet Method) | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Aluminium Chloride, Aluminium Chloride Hydroxide and Aluminium Chloride Hydroxide Sulfate (Monomeric) | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Aluminium Iron (III) Chloride (Monomeric) and Aluminium Iron (III) Chloride Hydroxide (Monomeric) | |
| Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Aluminium Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Calicum Hypochlorite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Carbon Dioxide | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Chlorine | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Hydrochloric Acid | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Hydrogen Peroxide | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Iron (III) Chloride | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Iron(II) Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Iron(III) Chloride Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Iron(III) Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Phosphoric Acid | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Polyaluminium Chloride Hydroxide and Polyaluminium Chloride Hydroxide Sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Aluminate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Carbonate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Chlorite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hydrogen Carbonate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hydroxide | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hypochlorite | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sulfuric Acid | |
| Chemicals used for treatment of water intended for human consumption Polyaluminium chloride hydroxide silicate | |
| Chemicals used for treatment of water intended for human consumption Polyaluminium hydroxide silicate sulfate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption Sodium Chloride for Regeneration of Ion Exchangers | |
| Dense Shaped Refractory Products - Methods of Test Part 16: Determination of Resistance to Sulfuric Acid | |
| Dense Shaped Refractory Products Part 12: Determination of Pyrometric Cone Equivalent (Refractoriness) | |
| Destructive Tests on Welds in Metallic Materials - Bend Tests | |
| Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination | |
| Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints | |
| Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test | |
| Determination of the Bond Behaviour Between Reinforcing Bars and Autoclaved Aerated Concrete by the "Push-Out" Test | |
| Determination of the Dimensions of Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure | |
| Determination of the Dry Density of Lightweight Aggregate Concrete with Open Structure | |
| Determination of the Mass per Unit Area of the Surface of Needled Floor Coverings | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories | |
| Direct acting indicating analogue electrical measuring instruments and their accessories Part 9: Recommended test methods | |
| Direct acting indicating analogue electrical measuring instruments and their accessories title Part 4: Special requirements for frequency meters | |
| Door Leaves - Determination of the Resistance to Hard Body Impact | |
| Door Leaves - General and Local Flatness - Measurement Method | |
| Door Leaves - Method for Measurement of Height, Width, Thickness and Squareness | |
| Ductile Iron Pipes, Fittings, Accessories and their Joints for Gas Pipelines - Requirements and Test Methods | |
| Electric and hybrid electric road vehicles \x96 Radio disturbance characteristics \x96 Limits and methods of measurement for the protection of off-board receivers below 30 MHz | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity - Product family standard | |
| Environmental testing Part 2-11: Tests \x97 Test Ka: Salt mist | |
| Environmental testing Part 2-13: Tests \x97 Test M: Low air pressure | |
| Environmental testing Part 2-14: Tests - Test N: Change of temperature | |
| Environmental testing Part 2-17: Tests \x97 Test Q: Sealing | |
| Environmental testing Part 2-20: Tests \x97 Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads | |
| Environmental testing Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices | |
| Environmental testing Part 2-30: Tests \x97 Test Db: Damp heat, cyclic (12 h + 12 h cycle) | |
| Environmental testing Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test | |
| Environmental testing Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering | |
| Environmental Testing Part 2-78: Tests - Test Cab: Damp heat, steady state | |
| Environmental testing Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies | |
| Environmental testing Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste | |
| Environmental testing Part 2-85: Tests - Test Fj: Vibration - Long time history replication | |
| Environmental testing Part 2-86: Tests - Test Fx: Vibration - Multi-exciter and multi-axis method | |
| Environmental testing Part 2-87: Tests - UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications | |
| Environmental testing Part 2-88: Tests - Test XD: Resistance of components and assemblies to liquid cleaning media | |
| Environmental testing Part 2: Tests \x96 Test Kb: Salt mist, cyclic (sodium chloride solution) | |
| Environmental testing Part 3-14: Supporting documentation and guidance \x97 Developing a climatic sequential test | |
| Environmental testing Part 3-1: Supporting documentation and guidance - Cold and dry heat tests | |
| Fibre Ropes for General Service - Determination of Certain Physical and Mechanical Properties | |
| Footware, Leather and Imitation Leather Goods Manufacturing Machines - Roughing, Scouring, Polishing and Trimming Machines - Safety Requirements | |
| Footwear Manufacturing Machines - Lasting Machines - Safety Requirements | |
| Gas Welding Equipment - Manifold Regulators Used in Welding, Cutting and Allied Processes up to 200 Bar | |
| Gas Welding Equipment - Oxygen/Fuel Gas Blowpipes (Cutting Machine Type) of Cylindrical Barrel - Type of Construction, General Specifications, Test Methods | |
| Gas-Fired Storage Water Heaters for the Production of Domestic Hot Water | |
| Geotextiles and Geotextile-Related Products - Determination of Mass per Unit Area | |
| Geotextiles and Geotextile-Related Products - Determination of Thickness at Specified Pressures Part 1: Single Layers | |
| Geotextiles and Geotextile-Related Products - Dynamic Perforation Test (Cone Drop Test) | |
| Geotextiles and Geotextile-Related Products - Sampling and Preparation of Test Specimens | |
| Graphical Symbols for Use in the Labelling of Medical Devices | |
| Guidance on the Application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for In Vitro Diagnostic Medical Devices | |
| Gymnastic Equipment - Asymmetric Bars - Functional and Safety Requirements, Test Methods | |
| Gymnastic Equipment - General Safety Requirements and Test Methods | |
| Gymnastic Equipment - Parallel Bars and Combination Asymmetric/ Parallel Bars - Functional and Safety Requirements, Test Methods | |
| Gymnastic Equipment - Vaulting Boxes - Functional and Safety Requirements, Test Methods | |
| Head Protectors for Ice Hockey Players | |
| Headforms for Use in the Testing of Protective Helmets | |
| Helmets for Airborne Sports | |
| High-voltage test techniques Part 1: General terminology and test requirements | |
| High-voltage test techniques Part 2: Measuring systems | |
| Hinged or Pivoted Doors - Determination of the Resistance to Static Torsion | |
| Hinged or Pivoted Doors - Determination of the Resistance to Vertical Load | |
| Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | |
| Inland Navigation Vessels - Push-Tows - Mounting Attachment for Demountable Signal Masts | |
| Letter symbols to be used in electrical technology Part 2: Telecommunications and electronics | |
| Light conveyor belts. Principal characteristics and applications | |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Medical electrical equipment - Capnometers for use with humans - Particular requirements | |
| Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock | |
| Methods of Test for Dense Shaped Refractory Products - Part 14:Determination of Thermal Conductivty by the Hot-Wire (Cross-Array) Method | |
| Methods of Test for Dense Shaped Refractory Products - Part 15:Determination of Thermal Conductivty by the Hot-Wire (Parallel) Method | |
| Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum | |
| Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum | |
| Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength | |
| Methods of Test for Dense Shaped Refractory Products - Part 7: Determination of Modulus of Rupture at Elevated Temperatures | |
| Methods of test for dense shaped refractory products Part 10. Determination of permanent change in dimensions on heating | |
| Methods of Test for Dense Shaped Refractory Products Part 13: Specification for Pyrometric Reference Cones for Laboratory Use | |
| Methods of test for dense shaped refractory products Part 19: Determination of thermal expansion by a differential method | |
| Methods of Test for Dense Shaped Refractory Products Part 1: Determination of Bulk Density, Apparent Porosity and True Porosity | |
| Methods of test for dense shaped refractory products Part 20: Determination of resistance to abrasion at ambient temperature | |
| Methods of test for dense shaped refractory products Part 2: Determination of true density | |
| Methods of Test for Dense Shaped Refractory Products Part 3: Test Methods for Carbon-Containing Refractories | |
| Methods of Test for Dense Shaped Refractory Products Part 4: Determination of Permeability to Gases | |
| Methods of Test for Dense Shaped Refractory Products Part 6: Determination of Modulus of Rupture at Ambient Temperature | |
| Methods of Test for Dense Shaped Refractory Products Part 8: Determination of Refractoriness-Under -Load | |
| Methods of Test for Dense Shaped Refractory Products Part 9: Determination of Creep in Compression | |
| Mortar for Masonry - Part 2: Masonry Mortar | |
| Mountaineering Equipment - Crampons - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Dynamic Mountaineering Ropes - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Energy Absorbing Systems for Use in Klettersteig (Via Ferrata) Climbing - Safety Requirements and Test Methods | |
| Mountaineering Equipment - Rock Anchors - Safety Requirements and Test Methods | |
| Non-Biological Systems for Use in Sterilizers - Part 4: Specification for Indicators as an Alternative to the Bowie and Dick Test for the Detection of Steam Penetration | |
| Non-Biological Systems for Use in Sterilizers - Part 5: Specification for Indicator Systems and Process Challenge Devices for Use in Performance Testing for Small Sterilizers Type B and Type S... | |
| Non-Biological Systems for Use in Sterilizers Part 1: General Requirements | |
| Non-Biological Systems for Use in Sterilizers Part 2: Process Indicators (Class A) | |
| Non-Biological Systems for Use in Sterilizers Part 3: Specification for Class B Indicators for Use in the Bowie and Dick Test | |
| Non-Destructive Examination of Fusion Welds - Visual Examination | |
| Packaging - Child-Resistant Packaging - Requirements and Testing Procedures for Non-Reclosable Packages for Non-Pharmaceutical Products | |
| Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 10: Adhesive Coated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches,... | |
| Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 2: Sterilization Wrap - Requirements and Test Methods | |
| Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 3: Paper for Use in the Manufacture of Paper Bags (Specified in EN 868-4) and in... | |
| Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 4:Paper Bags - Requirements and Test Methods | |
| Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 5: Heat and Self-Sealable Pouches and Reels of Paper and Plastic Film Construction - Requirements and... | |
| Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 6: Paper for the Manufacture of Packs for Medical Use for Sterilization by Ethylene Oxide or... | |
| Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 7: Adhesive Coated Paper for the Manufacture of Heat Sealable Packs for Medical Use for Sterilization... | |
| Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 8: Re-Usable Sterilization Containers for Steam Sterilizers Conforming to EN 285 - Requirements and Test Methods... | |
| Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 9: Uncoated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels... | |
| Packaging Materials and Systems for Medical Devices Which are to be Sterilized Part 1: General Requirements and Test Methods | |
| Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 1: Classification and Selection | |
| Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 3: Natural Weathering Test | |
| Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 4: Assesssment of the Water-Vapour Permeability | |
| Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 5: Assessment of the Liquid Water Permeability | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 10: Resistance to blocking of paints and varnishes on wood | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 13: Assessment of resistance to impact of a coating on a wooden substrate | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 2: Performance specification | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water | |
| Paints and varnishes - Coating materials and coating systems for exterior wood Part 7: Assessment of knot staining resistance of wood coatings | |
| Paints and Varnishes - Terms and Definitions for Coating Materials - Part 1: General Terms | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood Part 11: Assessment of air inclusions/microfoam in coating films | |
| Paints and varnishes \x97 Coating materials and coating systems for exterior wood Part 14: Determination of tensile properties of coating films | |
| Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Water-Soluble Matter | |
| Paragliding Equipment - Paragliders Part 1: Requirements and Test Methods for Structural Strength | |
| Paragliding equipment - Paragliders Part 2: Requirements and test methods for classifying flight safety characteristics | |
| Paragliding equipment Paragliders Part 2: Requirements and test methods for classifying flight safety characteristics | |
| Piling Equipment - Safety Requirements | |
| Plastics Hoses and Hose Assemblies - Thermoplastics Textile Reinforced Hydraulic Type - Specification | |
| Plastics Piping and Ducting Systems - Pipes and Fittings of Unplasticized Poly(Vinyl Chloride) (PVC-U) - Specimen Preparation for Determination of the Viscosity Number and Calculation of the K-Value | |
| Plastics Piping Systems - Elastomeric Sealing Ring Type Joints and Mechanical Joints for Thermoplastics Pressure Piping - Test Method for Leaktightness Under External Hydrostatic Pressure | |
| Plastics Piping Systems - Thermoplastics Pipes - Determination of Resistance to Internal Pressure at Constant Temperature | |
| Plastics Piping Systems - Thermoplastics Valves - Test Methods for Resistance to Internal Pressure and Leaktightness | |
| Plastics Piping Systems for the Transport of Water Intended for Human Consumption - Migration Assessment Part 1: Determination of Migration Values of Plastics Pipes | |
| Polyolefin Agricultural Twines | |
| Pressure Governors for Gas Appliances for Inlet Pressures up to 200 mbar | |
| Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar | |
| Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar | |
| Pressure regulators and associated safety devices for gas Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | |
| Programme Management - Configuration Management Part 101: Configuration identification | |
| Programme Management - Configuration Management Part 104: Configuration Control | |
| Programme Management - Definition justification and qualification - A guide to drawing up the definition justification plan and of the definition justification dossier | |
| Programme management - Guidelines for project management specification | |
| Programme Management \x96 Configuration Management Part 100: A guide for the application of the principles of configuration management | |
| Programme Management \x96 Configuration Management Part 102: Configuration status accounting | |
| Programme Management \x96 Configuration Management Part 103: Configuration Verifications, Reviews and Audits | |
| Programme Management \x96 Configuration Management Part 105: Glossary | |
| Protective Clothing - Mechanical Properties - Test Method: Puncture Resistance | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits | |
| Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated \x93gas-tight\x94 (Type 1) and \x93non-gas-tight\x9 4 (Type 2)... | |
| Protective Clothing Against Liquid and Gaseous Chemicals, Including Liquid Aerosols and Solid Particles - Part 2: Performance Requirements for "Gas-Tight" (Type 1) Chemical Protective Suits for Emergency Teams (ET) | |
| Pulse Oximeters - Particular Requirements | |
| Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System | |
| Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) | |
| Quality management systems Assessment applicable to maintenance organizations | |
| Quality management systems Assessment applicable to stockist distributors | |
| Quality management systems Data matrix quality requirements for parts marking | |
| Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing | |
| Quality management systems Requirements for Aerospace Quality Management System Certification/ Registrations Programs | |
| Quality management systems Requirements for stockist distributors | |
| Quality management systems Variation management of key characteristics | |
| Quality systems First article inspection | |
| Quality systems Model for quality assurance applicable to maintenance organizations | |
| Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power systems Performance requirements and test methods | |
| Risk management - Risk assessment techniques | |
| Rotating electrical machines Part 11: Thermal protection | |
| Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors | |
| Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher \x96 Measurement, evaluation and limits of vibration severity | |
| Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines | |
| Rotating electrical machines Part 18-1: Functional evaluation of insulation systems - General guidelines | |
| Rotating electrical machines Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings | |
| Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) | |
| Rotating electrical machines Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 | |
| Rotating electrical machines Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors | |
| Rotating electrical machines Part 23: Repair, overhaul and reclamation | |
| Rotating electrical machines Part 27-1: Off-line partial discharge measurements on the winding insulation | |
| Rotating electrical machines Part 27-2: On-line partial discharge measurements on the stator winding insulation | |
| Rotating electrical machines Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines | |
| Rotating electrical machines Part 30-3: Efficiency classes of high voltage AC motors (IE-code) | |
| Rotating electrical machines Part 33: Synchronous hydrogenerators including motor-generators - Specific requirements | |
| Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators | |
| Rotating electrical machines Part 4-1: Methods for determining synchronous machine quantities from tests | |
| Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) \x97 Classification | |
| Rotating electrical machines Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) | |
| Rotating electrical machines Part 9: Noise limits | |
| Rubber Hoses and Hose Assemblies - Rubber-Covered Spiral Wire Reinforced Hydraulic Type - Specification | |
| Rubber Hoses and Hose Assemblies - Textile Reinforced Hydraulic Type - Specification | |
| Rubber Hoses and Hose Assemblies - Wire Braid Reinforced Compact Type for Hydraulic Applications - Specification | |
| Rubber Hoses and Hose Assemblies - Wire Braid Reinforced Hydraulic Type - Specification | |
| Safety and control devices for gas burners and gas burning appliances Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa | |
| Safety and control devices for gas burners and gas burning appliances Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types | |
| Safety of machinery - Ergonomics requirements for design of displays and control actuators Part 4: Location and arrangement of displays and control actuators | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators Part 1. General principles for human interactions with displays and control actuators | |
| Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 1: General Principles for Human Interactions with Displays and Control Actuators | |
| Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 2: Displays | |
| Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators Part 3: Control Actuators | |
| Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards | |
| Safety of Machinery - Safety Related Parts of Control Systems - Part 1. General Principles for Design | |
| Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Hydraulics | |
| Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Pneumatics | |
| Safety of machinery - Safety requirements for pressure metal diecasting units | |
| Safety of Machinery - System of Auditory and Visual Danger and Information Signals | |
| Safety of Machinery - The Positioning of Protective Equipment in Respect of Approach Speeds of Parts of the Human Body | |
| Safety of Woodworking Machines - Combined Woodworking Machines | |
| Safety of woodworking machines - Hand fed surface planing machines | |
| Safety of Woodworking Machines - Handfed Surface Planing Machines | |
| Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines | |
| Safety of Woodworking Machines - One Side Thickness Planing Machines | |
| Safety of Woodworking Machines - Surface Planing and Thicknessing Machines | |
| Safety of woodworking machines Surface planing and thicknessing machines | |
| Safety Requirements for High Pressure Metal Diecasting Units | |
| Sawn Timber - Appearance Grading of Hardwoods Part 1: Oak and Beech | |
| Sawn timber \x97 Appearance grading of hardwoods \x97 Part 2: Poplars | |
| Separator Systems for Light Liquids (e.g. Oil and Petrol) - Part 1: Principles of Product Design, Performance and Testing, Marking and Quality Control | |
| Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance | |
| Specification for mortar for masonry - Part 1: Rendering and plastering mortar | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance - measurements | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus \x97 Antennas and test sites for radiated disturbance measurements | |
| Specification for radio disturbance and immunity measuring apparatus and methods Part-1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus | |
| Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods | |
| Stationary Training Equipment - Part 6: Treadmills, Additional Specific Safety Requirements and Test Methods | |
| Stationary Training Equipment - Part 7: Rowing Machines, Additional Specific Safety Requirements and Test Methods | |
| Stationary Training Equipment - Part 8: Steppers, Stairclimbers and Climbers - Additional Specific Safety Requirements and Test Methods | |
| Stationary training equipment Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods | |
| Stationary Training Equipment Part 1: General Safety Requirements and Test Methods | |
| Stationary Training Equipment Part 2: Strength Training Equipment - Additional Specific Safety Requirements and Test Methods | |
| Stationary Training Equipment Part 4: Strength Training Benches - Additional Specific Safety Requirements and Test Methods | |
| Stationary Training Equipment Part 5: Pedal Crank Training Equipment - Additional Specification Safety Requirements and Test Methods | |
| Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods | |
| Stationary training equipment Part 9: Elliptical trainers, additional specific safety requirements and test methods | |
| Steam turbines Part 1: Specifications | |
| Tannery Machines - Reciprocating Roller Machines - Safety Requirements | |
| Test Methods for Verification of Corrosion Protection of Reinforcement in Autoclaved Aerated Concrete and Lightweight Aggregate Concrete with Open Structure | |
| Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples | |
| Tests for General Properties of Aggregates - Part 5: Common Equipment and Calibration | |
| Tests for General Properties of Aggregates - Part 6: Definitions of Repeatability and Reproducibility | |
| Tests for General Properties of Aggregates Part 1: Methods for Sampling | |
| Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description | |
| Tests for Geometrical Properties of Aggregates - Part 10: Assessment of Fines - Grading of Fillers (Air-Jet Sieving) | |
| Tests for Geometrical Properties of Aggregates - Part 4: Determination of Particle Shape - Shape Index | |
| Tests for Geometrical Properties of Aggregates - Part 5: Determination of Percentage of Crushed and Broken Surfaces in Coarse Aggregate Particles | |
| Tests for Geometrical Properties of Aggregates - Part 6: Assessment of Surface Characteristics - Flow Coefficient of Aggregates | |
| Tests for Geometrical Properties of Aggregates - Part 7: Determination of Shell Content - Percentage of Shells in Coarse Aggregates | |
| Tests for Geometrical Properties of Aggregates - Part 8: Assessment of Fines - Sand Equivalent Test | |
| Tests for Geometrical Properties of Aggregates - Part 9: Assessment of Fines - Methylene Blue Test | |
| Tests for geometrical properties of aggregates Part 11: Classification test for the constituents of coarse recycled aggregate | |
| Tests for Geometrical Properties of Aggregates Part 1: Determination of Particle Size Distribution - Sieving Method | |
| Tests for Geometrical Properties of Aggregates Part 2: Determination of Particle Size Distribution - Test Sieves, Nominal Size of Apertures | |
| Tests for Geometrical Properties of Aggregates Part 3: Determination of Particle Shape - Flakiness Index | |
| Tests for geometrical properties of aggregates Part 8: Assessment of fines - Sand equivalent test | |
| Tests for geometrical properties of aggregates Part 9: Assessment of fines - Methylene blue test | |
| Textile Floor Coverings - Assessment of the Creep of the Backings | |
| Textile Floor Coverings - Determination of the Side Length, Squareness and Straightness of Tiles | |
| Textile Floor Coverings - Tiles - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat Conditions and Distortion out of Plane | |
| Textiles Floor Coverings - Castor Chair Test | |
| Timber Fasteners - Specifications for Connectors for Timber | |
| Timber in Joinery - General Classification of Timber Quality | |
| Tracked Changes (Redline) - Admixtures for concrete, mortar and grout Part 6: Sampling, assessment and verification of the constancy of performance | |
| Tracked Changes (Redline) - Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms... | |
| Tracked Changes (Redline) - Aerospace series - Notice of change (NOC) | |
| Tracked Changes (Redline) - Aerospace series - Programme management - Recommendations to implement risk management and opportunity management | |
| Tracked Changes (Redline) - Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication | |
| Tracked Changes (Redline) - Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products | |
| Tracked Changes (Redline) - Aerospace series - Quality management systems - Variation management of key characteristics | |
| Tracked Changes (Redline) - Aerospace series - Quality systems - Direct Ship - Guidance for aerospace companies | |
| Tracked Changes (Redline) - Aerospace series - Quality systems - First article inspection requirements | |
| Tracked Changes (Redline) - Aerospace series \x97 Quality management systems \x97 Part 1: Requirements for Certification of aviation, space, and defense | |
| Tracked Changes (Redline) - Aerospace series \x97 Quality management systems Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certifi cation Programs | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications | |
| Tracked Changes (Redline) - Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Hydrochloric acid | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Sulfuric acid | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Aluminium iron (III) sulfate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Aluminium sulfate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Chlorine | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Hydrogen peroxide | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Iron (II) sulfate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Iron (III) chloride sulfate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Iron (III) chloride | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Iron (III) sulfate solution | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Sodium aluminate | |
| Tracked Changes (Redline) - Environmental testing - Part 2-14: Tests - Test N: Change of temperature | |
| Tracked Changes (Redline) - Environmental testing - Part 2-17: Tests - Test Q: Sealing | |
| Tracked Changes (Redline) - Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads | |
| Tracked Changes (Redline) - Environmental testing \x97 Part 2-11: Tests \x97 Test Ka: Salt mist | |
| Tracked Changes (Redline) - Environmental testing \x97 Part 2-83: Tests \x97 Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder... | |
| Tracked Changes (Redline) - Environmental testing Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test | |
| Tracked Changes (Redline) - Environmental testing Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering | |
| Tracked Changes (Redline) - Environmental testing Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies | |
| Tracked Changes (Redline) - Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties | |
| Tracked Changes (Redline) - Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety | |
| Tracked Changes (Redline) - Gymnastic equipment - General safety requirements and test methods | |
| Tracked Changes (Redline) - High-voltage test techniques \x97 Part 1: General terminology and test requirements | |
| Tracked Changes (Redline) - Letter symbols to be used in electrical technology Part 2: Telecommunications and electronics | |
| Tracked Changes (Redline) - Methods of test for (dense) shaped refractory products Part 6: Determination of modulus of rupture at ambient temperature | |
| Tracked Changes (Redline) - Methods of test for dense shaped refractory products Part 1: Determination of bulk density, apparent porosity and true porosity | |
| Tracked Changes (Redline) - Mountaineering equipment - Rock anchors - Safety requirements and test methods | |
| Tracked Changes (Redline) - Mountaineering equipment \x97 Crampons \x97 Safety requirements and test methods | |
| Tracked Changes (Redline) - Mountaineering equipment \x97 Energy absorbing systems for use in klettersteig (via ferrata) climbing \x97 Safety requirements and test methods | |
| Tracked Changes (Redline) - Packaging - Child-resistant packaging - Requirements and testing procedures for nonreclosable packages for non-pharmaceutical products | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical device Part 6: Paper for low temperature sterilization processes \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices - Part 4: Paper bags \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 10: Adhesive coated nonwoven materials of polyolefines \x96 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 2: Sterilization wrap \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of... | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 7: Adhesive coated paper for low temperature sterilization processes \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 \x96 Requirements and test methods | |
| Tracked Changes (Redline) - Packaging for terminally sterilized medical devices Part 9: Uncoated nonwoven materials of polyolefines \x96 Requirements and test methods | |
| Tracked Changes (Redline) - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification | |
| Tracked Changes (Redline) - Paints and varnishes - Coating materials and coating systems for exterior wood Part 10: Resistance to blocking of paints and varnishes on wood | |
| Tracked Changes (Redline) - Paints and varnishes - Coating materials and coating systems for exterior wood Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and... | |
| Tracked Changes (Redline) - Paints and varnishes \x96 Coating materials and coating systems for exterior wood Part 11: Assessment of air inclusions/microfoam in coating films | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Coating materials and coating systems for exterior wood \x97 Part 5: Assessment of the liquid water permeability | |
| Tracked Changes (Redline) - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits | |
| Tracked Changes (Redline) - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for... | |
| Tracked Changes (Redline) - Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations | |
| Tracked Changes (Redline) - Quality Management Systems - Requirements for Aviation Maintenance Organizations | |
| Tracked Changes (Redline) - Quality Management Systems - Requirements for Aviation, Space and Defence Distributors | |
| Tracked Changes (Redline) - Quality Management Systems - Requirements for Aviation, Space and Defence Organizations | |
| Tracked Changes (Redline) - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) | |
| Tracked Changes (Redline) - Risk management \x96 Risk assessment techniques | |
| Tracked Changes (Redline) - Rotating electrical machines - Part 11: Thermal protection | |
| Tracked Changes (Redline) - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | |
| Tracked Changes (Redline) - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings | |
| Tracked Changes (Redline) - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 18-1: Functional evaluation of insulation systems \x97 General guidelines | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 2-2: Specific methods for determining separate losses of large machines from tests \x97 Supplement to IEC 60034-2-1 | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors | |
| Tracked Changes (Redline) - Rotating electrical machines \x97 Part 9: Noise limits | |
| Tracked Changes (Redline) - Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher \x96 Measurement, evaluation and limits of vibration severity | |
| Tracked Changes (Redline) - Rotating electrical machines Part 27-1: Off-line partial discharge measurements on the winding insulation | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies \x97 Textile reinforced hydraulic type \x97 Specification | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies \x97 Wire braid reinforced compact type for hydraulic applications \x97Specification | |
| Tracked Changes (Redline) - Rubber hoses and hoseassemblies \x97 Wire braidreinforced hydraulic type \x97 Specification | |
| Tracked Changes (Redline) - Safety and control devices for gas burners and gas burning appliances \x97 Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | |
| Tracked Changes (Redline) - Safety and control devices for gas burners and gas burning appliances \x97 Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including... | |
| Tracked Changes (Redline) - Specification for mortar for masonry Part 1: Rendering and plastering mortar | |
| Tracked Changes (Redline) - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus | |
| Tracked Changes (Redline) - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance... | |
| Tracked Changes (Redline) - Tests for general properties of aggregates \x97 Part 3: Procedure and terminology for simplified petrographic description | |
| Tracked Changes (Redline) - Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates | |
| Tracked Changes (Redline) - Tests for geometrical properties of aggregates \x97 Part 6: Assessment of surface characteristics \x97 Flow coefficient of aggregates | |
| Tracked Changes (Redline) - Tests for geometrical properties of aggregates Part 9: Assessment of fines - Methylene blue test | |
| Tracked Changes (Redline) - Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board... | |
| Tracked Changes (Redline) - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | |
| Tracked Changes (Redline) - WC pans and WC suites with integral trap | |
| Tracked Changes (Redline) \x96 Environmental testing Part 2: Tests \x96 Test Kb: Salt mist, cyclic (sodium chloride solution) | |
| Tracked Changes (Redlines) - Packaging for terminally sterilized medical devices Part 5: Sealable pouches and reels of porous materials and plastic film construction \x96 Requirements and test methods | |
| Transportable Gas Cylinders - Cylinder Valves - Specification and Type Testing | |
| Transportable Gas Cylinders - Pin-Index, Yoke-Type Valve Outlet Connections for Medical Use | |
| Transportable Gas Cylinders Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design, Construction and Tests | |
| Underground Tanks of Glass-Reinforced Plastics (GRP) - Determination of Factor Alpha and Factor Beta | |
| Underground Tanks of Glass-Reinforced Plastics (GRP) - Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels Part 1: Requirements and Test Methods for Single Wall Tanks | |
| Underground Tanks of Glass-Reinforced Plastics (GRP) - Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels Part 2: Transport, Handling, Storage and Installation of Single Wall Tanks... | |
| Underground Tanks of Glass-Reinforced Plastics (GRP) - Method for One Side Exposure to Fluids | |
| Vehicles, boats and devices with internal combustion engines or traction batteries \x97 Radio disturbance characteristics \x97 Limits and methods of measurement for the protection of off-board receivers | |
| Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | |
| Water quality - Determination of anionic surfactants by measurement of the methylene blue index MBAS | |
| Water Quality - Determination of Suspended Solids - Method by Filtration Through Glass Fibre Filters | |
| WC pans and WC suites with integral trap | |
| WC Pans with Integral Trap | |
| Windows and Curtain Walling, Doors, Blinds and Shutters - Determination of the Resistance to Soft and Heavy Body Impact for Doors | |
| Zinc and Zinc Alloys - Specification for Rolled Flat Products for Building |
| << Prev | Next >> |