Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
290
300
310
320
330
340
342
343
344
345
346
347
348
349
350
351
352
353
354
360
370
380
390
400
410
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Alarm systems - Combined and integrated alarm systems Part 1: General requirements | |
| Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offend er programs | |
| Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use | |
| Alcohol interlocks - Test methods and performance requirements Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use | |
| Alcohol interlocks - Test methods and performance requirements Part 4: Connection and digital interface between the alcohol interlock and the vehicle | |
| Alcohol interlocks \x97 Test methods and performance requirements Part 3: Guidance for authorities, decision makers, purchasers and users | |
| Alcohol interlocks \x97 Test methods and performance requirements Part 6: Data security | |
| Alcohol interlocks \x97 Test methods and performance requirements Part 7: Installation document | |
| Application of Equipotential Bonding and Earthing Buildings with Information Technology Equipment | |
| Assessment of workers\x92 exposure to electric and magnetic fields of industrial induction heating equipment | |
| Audio, video and information technology equipment - Routine electrical safety testing in production | |
| Audio, Video and Similar Electronic Apparatus - Routine Electrical Safety Testing in Production | |
| Basic Standard for the Calculation and Measurement of Electromagnetic Field Strength and SAR Related to Human Exposure from Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunications System (110... | |
| Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting service transmitters in the HF bands (3 MHz - 30 MHz) | |
| Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz) | |
| Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes | |
| Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes | |
| Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations | |
| Basic Standard for the Measurement of Specific Absorption Rate Related to Human Exposure to Electromagnetic Fields from Mobile Phones (300 MHz - 3 GHz) | |
| Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz) | |
| Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the... | |
| Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers | |
| Bushings for transformers and reactor cable boxes not exceeding 36 kV | |
| Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers | |
| Cable cleats for electrical installations | |
| Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 | |
| Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 2 | |
| Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 | |
| Cables for indoor residential telecommunication installations Part 4: Cables up to 1 200 MHz - Grade 3 | |
| Charging control systems for household electric room heating of the storage type Methods for measuring performance | |
| Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results | |
| Communication Cables - Part 1-1: General | |
| Communication cables - Part 2-1: Common design rules and construction | |
| Communication Cables - Part 2-20: Common Design Rules and Construction - General | |
| Communication Cables - Part 2-21: Common Design Rules and Construction - PVC Insulation Compounds | |
| Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds | |
| Communication Cables - Part 2-23: Common Design Rules and Construction - PE Insulation | |
| Communication Cables - Part 2-24: Common Design Rules and Construction - PE Sheathing | |
| Communication Cables - Part 2-25: Common Design Rules and Construction - Polypropylene Insulation Compounds | |
| Communication Cables - Part 2-26: Common Design Rules and Construction - Halogen Free Flame Retardant Insulation Compounds | |
| Communication Cables - Part 2-27: Common Design Rules and Construction - Halogen Free Flame Retardant Thermoplastic Sheathing Compounds | |
| Communication Cables - Part 2-28: Common Design Rules and Construction - Filling Compounds for Filled Cables | |
| Communication Cables - Part 2-29: Common Design Rules and Construction - Cross-Linked PE Insulation compounds | |
| Communication Cables - Part 2-30: Common Design Rules and Construction - Poly(Tetrafluoroethy lene-Hexafluoropropy lene)(FEP) Insulation and Sheathing | |
| Communication Cables - Part 4-1: General Considerations for the Use of Cables - Environmental Conditions and Safety Aspects | |
| Communication cables - Part 4-2: General considerations for the use of cables - Guide to use | |
| Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions) | |
| Communication Cables - Specifications for Test Methods - Part 1-2: Electrical Test Methods - DC Resistance | |
| Communication Cables - Specifications for Test Methods - Part 1-3: Electrical Test Methods - Dielectric Strength | |
| Communication Cables - Specifications for Test Methods - Part 1-4: Electrical Test Methods - Insulation Resistance | |
| Communication Cables - Specifications for Test Methods - Part 1-5: Electrical Test Methods - Capacitance | |
| Communication Cables - Specifications for Test Methods - Part 1-6: Electrical Test Methods - Electromagnetic Performance | |
| Communication Cables - Specifications for Test Methods - Part 1-7: Electrical Test Methods - Velocity of Propagation | |
| Communication Cables - Specifications for Test Methods - Part 1-8: Electrical Test Methods - Attenuation | |
| Communication Cables - Specifications for Test Methods - Part 1-9: Electrical Test Methods - Unbalance Attenuation (Longitudinal Conversion Loss, Longitudinal Conversion Transfer Loss) | |
| Communication Cables - Specifications for Test Methods - Part 3-11: Mechanical Test Methods - Cable Cut-Through Resistance | |
| Communication Cables - Specifications for Test Methods - Part 3-12: Mechanical Test Methods - Shot Gun Damage | |
| Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration | |
| Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure | |
| Communication Cables - Specifications for Test Methods - Part 3-16: Mechanical Test Methods - Cable Tensile Performance | |
| Communication Cables - Specifications for Test Methods - Part 3-17: Mechanical Test Methods - Adhesion of Dielectric and Sheath | |
| Communication Cables - Specifications for Test Methods - Part 3-1: Mechanical Test Methods - General Requirements | |
| Communication Cables - Specifications for Test Methods - Part 3-2: Mechanical Test Methods - Tensile Strength and Elongation for Conductor | |
| Communication Cables - Specifications for Test Methods - Part 3-4: Mechanical Test Methods - Tensile Strength, Elongation and Shrinkage of Insulation and Sheath | |
| Communication Cables - Specifications for Test Methods - Part 3-5: Mechanical Test Methods - Crush Resistance of the Cable | |
| Communication Cables - Specifications for Test Methods - Part 3-6: Mechanical Test Methods - Impact Resistance of the Cable | |
| Communication Cables - Specifications for Test Methods - Part 3-7: Mechanical Test Methods - Abrasion Resistance of the Cable Sheath | |
| Communication Cables - Specifications for Test Methods - Part 3-8: Mechanical Test Methods - Abrasion Resistance of Cable Sheath Markings | |
| Communication Cables - Specifications for Test Methods - Part 3-9: Mechanical Test Methods - Bending Tests | |
| Communication Cables - Specifications for Test Methods - Part 4-11: Environmental Test Methods - a Horizontal Integrated Fire Test Method | |
| Communication cables - Specifications for test methods - Part 4-12: Environmental test methods - Vertical flame spread test on bunched small communication cables | |
| Communication cables - Specifications for test methods - Part 4-14: Environmental test methods - Lightning | |
| Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions | |
| Communication Cables - Specifications for Test Methods - Part 4-1: Environmental Test Methods - General Requirements | |
| Communication Cables - Specifications for Test Methods - Part 4-2: Environmental Test Methods - Water Penetration | |
| Communication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating fluids | |
| Communication cables - Specifications for test methods - Part 4-5: Environmental test methods - Climatic sequence | |
| Communication Cables - Specifications for Test Methods - Part 4-6: Environmental Test Methods - Temperature Cycling | |
| Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state | |
| Communication Cables - Specifications for Test Methods - Part 4-9: Environmental Test Methods - Pneumatic Resistance | |
| Communication cables - Specifications for test methods Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable | |
| Communication cables \x97 Specifications for test methods Part 1- 17: Electrical test methods \x97 Exogenous Crosstalk ExNEXT and ExFEXT | |
| Communication cables Part 1-2: Definitions | |
| Communication cables Part 2-33: Common design rules and construction \x97 Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) | |
| Communication cables Part 2-35: Common design rules and construction \x97 Polyamide sheathing compound | |
| Communication cables Part 2-36: Common design rules and construction \x97 Crosslinked Silicone rubber insulation compound | |
| Communication cables Part 2-37: Common design rules and construction \x97 Polyethylene insulation for coaxial cables | |
| Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables | |
| Communication cables Specifications for tests methods Part 3-10: Mechanical test methods Torsion and twisting | |
| Conductor cars | |
| Conductors for overhead lines - Characteristics of greases | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector Sets and Interconnect Components to be Used in Optical Fibre Communication Systems - Product Specifications - Part 16-1: Type LF3 APC Simplex Terminated on IEC 60793-2-50 Category B1.1 and... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+ 4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre,... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 4-2: Type SC/APC simplex 8\xb0 terminated on IEC 60793-2-50 of types B1.1 and... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode... | |
| Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single... | |
| Connector sets and interconnect components to be used in optical fibre communication systems \x97 Product specifications - Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with... | |
| Connector sets and Interconnect components to be used in optical fibre communication systems \x97 Product specifications Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN... | |
| Connector sets and interconnect components to be used in optical fibre communication systems \x97 Product specifications Part 4-3: Type SC/APC simplex 9\xb0 terminated on EN 60793-2-50 of type B-652.D and... | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 10-1: Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 5-1: Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 6-2: Type SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre... | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-3: Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-4: LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre | |
| Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre | |
| Connectors for photovoltaic systems - Safety requirements and tests | |
| Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product Specifications Part 2-1: Type FC-PC Terminated on IEC 60793-2 Category B1 Singlemode Fibre | |
| Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product Specifications Part 3-1: Type SG Terminated on IEC 60793-2 Category A1a and A1b Multimode Fibre... | |
| Connectors sets and interconnect components to be used in optical fibre communication systems Product specifications Part 10-2: MU/APC singlemode terminated on IEC 60793-2 category B1 fibre | |
| Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 1: Covered conductors | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. Part 3: Guide to use | |
| Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors -... | |
| Data sheet and name plate for photovoltaic inverters | |
| Datasheet and nameplate information for photovoltaic modules | |
| Determination of workers\x92 exposure to electromagnetic fields and assessment of risk at a broadcast site | |
| Digital Audio Broadcasting System - Specification of the DAB Command Set for Receivers (DCSR) | |
| Earthing of power installations exceeding 1 kV a.c. | |
| Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems | |
| Efficiency of domestic electrical storage water heaters and testing methods | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-41: Cables for general applications - Single core cables with crosslinked silicone... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic... | |
| Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic... | |
| Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance | |
| Electric Ovens for Household Use - Methods for Measuring Energy Consumption | |
| Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and testing | |
| Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems | |
| Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen Requirements on the functional safety of fixed gas detection systems | |
| Electrical Apparatus for the Detection of Carbon Monoxide in Domestic Premises - Guide on the Selection, Installation, Use and Maintenence | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises Part 1: Test methods and performance requirements | |
| Electrical apparatus for the detection of carbon monoxide in domestic premises Part 2: Electrical apparatus for continuous operation in a fixed installations in recreational vehicles and similar premises including recreational... | |
| Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) | |
| Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps | |
| Electrical test methods for low voltage energy cables | |
| Electrically Insulating Footwear for Working on Low Voltage Installations | |
| Electrically Insulating Helmets for Use on Low Voltage Installations | |
| Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) | |
| Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions Metering equipment (class indexes A, B and C) | |
| Electricity metering equipment (a.c.) Part 2: Particular requirements - Electromechanical meters for active energy (class indexes A and B) | |
| Electricity metering equipment (a.c.) Part 2: Particular requirements Electromechanical meters for active energy (class indexes A and B) | |
| Electricity metering equipment (a.c.) Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C) | |
| Electricity metering equipment (a.c.) Part 3: Particular requirements Static meters for active energy (class indexes A, B and C) | |
| Electricity metering equipment Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B and C) | |
| Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles | |
| Electromagnetic compatibility (EMC) \x97 Product family standard for machine tools \x97 Part 1: Emission | |
| Electromagnetic compatibility (EMC) Product family standard for machine tools Part 2: Immunity | |
| Electromagnetic Compatibility - Road Traffic Signal Systems - Product Standard | |
| Empty Enclosures for Low-Voltage Switchgear and Controlgear Assemblies - General Requirements | |
| End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables | |
| End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables | |
| Equipment for use in audio and video door-entry systems | |
| Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications Part 3-4: Wall box for splice to patchcord connections, for category C and... | |
| Fibre management systems and protective housings to be used in optical fibre communication systems \x96 Product specifications Part 4-1: Passive optical street cabinet for category A | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures,... | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-1: Fibre management system, splice wall box, for category C & G | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-2: Singlemode mechanical fibre splice | |
| Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)... | |
| Fibre organisers and closures to be used in optical fibre communication systems \x97 Product specifications Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks... | |
| Fibre organisers and closures to be used in optical fibre communication systems \x97 Product specifications Part 3-5: Wall outlet | |
| Fibre organisers and closures to be used in optical fibre communication systems Product specifications Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A | |
| Fibre organisers and closures to be used in optical fibre communications systems - Product specifications Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A... | |
| Fibre organizers and closures to be used in optical fibre communication systems \x97 Product specifications Part 3-8: Fibre management system, terminal equipment box type 1 for category C | |
| Fixed installations and rolling stock for railway applications - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability Part 2: Stability and... | |
| Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite - Modem layer specification | |
| Gas appliances - Fuel cell gas heating appliance - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW | |
| Gas appliances \x97 Combined heat and power appliance of nominal heat input inferior or equal to 70 kW | |
| General Purpose Three-Phase Induction Motors Having Standard Dimensions and Outputs - Frame Numbers 56 to 315 and Flange Numbers 65 to 740 | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in... | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations \x97 Installation and planning | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer Part 12-1:... | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 11: Smart Metering - Application Specifications \x97 Simple External Consumer Display | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 12-2: Smart grid - Application specification - Interface and framework for customer -... | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 1: General requirements | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 2: Environmental conditions | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC requirements, conditions and test set-up | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-3: EMC requirements for HBES/BACS used in industry environment | |
| General requirements for Home and Building Electronic Systems (HBES)and Building Automation and Control Systems (BACS) Part 3: Electrical safety requirements | |
| General requirements for Home and Building Electronic Systems (HBES)and Building Automation and Control Systems (BACS) Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment | |
| Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) | |
| Generic Standard to Demonstrate the Compliance of Low Power Electronic and Electrical Apparatus with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (10 MHz - 300 GHz) -... | |
| Group I, Category M1 Equipment Intended to Remain Functional in Atmospheres Endangered by Firedamp and/or Coal Dust | |
| Household and similar electrical appliances - Electromagnetic fields - Methods for evaluation and measurement | |
| Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles | |
| Household and similar electrical appliances - Safety - Particular requirements for commercial electric conveyor dishwashing machines | |
| Household and similar electrical appliances - Safety - Particular requirements for decorative robots | |
| Household and similar electrical appliances Electromagnetic fields Methods for evaluation and measurement | |
| Household and similar electrical appliances Safety Particular requirements for commercial electric conveyor dishwashing machines | |
| Household appliances interworking - Part 1: Functional specification | |
| Household appliances interworking - Part 2: Data structures | |
| Hydraulic Cable Cutting Devices - Devices to be Used on Electrical Insatllations with Nominal Voltage up to AC 30 kV | |
| Industrial Communications Subsystem Based on ISO 11898 (CAN) for Controller-Device Interfaces - Part 1: General Requirements | |
| Industrial Communications Subsystem Based on ISO 11898 (CAN) for Controller-Device Interfaces - Part 2: DeviceNet | |
| Industrial Communications Subsystem Based on ISO 11898 (CAN) for Controller-Device Interfaces - Part 3: Smart Distributed System (SDS) | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen | |
| Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 5: Functional safety communication based on EN 50325-4 | |
| Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10... | |
| Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category... | |
| Industrial connector sets and interconnect components to be used in optical fibre control and communication systems \x97 Product specifications Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1... | |
| Information technology - Cabling installation - Testing of installed cabling | |
| Information technology Cabling installation Testing of installed cabling | |
| Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV | |
| Insulating Oil - Determination of Fibre Contamination by the Counting Method Using a Microscope | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) | |
| Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross-linked elastomeric sheathing compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables Part 3: PVC insulating compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables Part 5: Halogen-free, cross-linked insulating compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathing compounds | |
| Insulating, sheathing and covering materials for low voltage energy cables Part 8: Halogen-free, thermoplastic sheathing compounds | |
| Insulating, sheathing and covering materials for low-voltage energy cables Part 0: General introduction | |
| Lead acid starter batteries Part 7: General requirements and methods of tests for motorcycle batteries | |
| Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables | |
| Lead-Acid Starter Batteries - General Requirements, Methods of Test and Numbering | |
| Lead-acid starter batteries - Part 1: General requirements and methods of test | |
| Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals | |
| Lead-acid starter batteries - Part 3: Terminal system for batteries with 36 V nominal voltage | |
| Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles | |
| Lead-acid starter batteries Part 1: General requirements and methods of test | |
| Lead-acid starter batteries Part 5: Properties of battery housings and handles | |
| Lead-acid starter batteries Part 6: Batteries for Micro-Cycle Applications | |
| Limitation of Human Exposure to Electromagnetic Fields from Devices Operating in the Frequency Range 0 Hz to 10 GHz, Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and... | |
| Liquid tight sheathing systems for cable management | |
| Live working - Footwear for electrical protection - Insulating footwear and overboots | |
| Low-Voltage Switchgear and Controlgear - Controller and Device Interface Systems - Actuator Sensor Interface (AS-i) | |
| Marking by Inscription for the Identification of Cores of Electric Cables | |
| Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) | |
| Measurement Method of Total Input Power of Ballast-Lamp Circuits | |
| Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure | |
| Method for Spark Testing of Cables | |
| Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits | |
| Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment | |
| Monitoring and alarm receiving centre Part 1: Location and construction requirements | |
| Monitoring and alarm receiving centre Part 2: Technical requirements | |
| Monitoring and alarm receiving centre Part 3: Procedures and requirements for operation | |
| Monitoring and Alarm Receiving Centre | |
| Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables | |
| Multi-pair cables used in high bit rate digital access telecommunications networks Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal... | |
| Multi-purpose insulating sticks for electrical operations on high voltage installations | |
| Non electrical test methods for low voltage energy cables | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Part 1: Fluid-filled cable terminations | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Part 2: Dry-type cable terminations | |
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV | |
| Overhead electrical lines exceeding AC 1 kV - National Normative Aspects (NNA) for Slovenia (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV \x96 Part 2-5: National Normative Aspects (NNA) for DENMARK (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part -2-7: National Normative Aspects (NNA) for FINLAND (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-12: National Normative Aspects (NNA) for ICELAND (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-13: National Normative Aspects (NNA) for ITALY (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-15: National Normative Aspects (NNAs) for the Netherlands (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-16: National Normative Aspects (NNA) for NORWAY | |
| Overhead electrical lines exceeding AC 1 kV Part 2-18: National Normative Aspects (NNA) for Sweden (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC | |
| Overhead electrical lines exceeding AC 1 kV Part 2-1: National Normative Aspects (NNAs) for Austria (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-22: National Normative Aspects (NNA) for Poland (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-23: National Normative Aspects (NNA) for SLOVAKIA (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-24: National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-2: National Normative Aspects (NNA) for BELGIUM (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-6: National Normative Aspects (NNA) for SPAIN (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-8: National Normative Aspects (NNA) for France (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 1 kV Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 3: Set of National Normative Aspects | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 1: General requirements Common specifications | |
| Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 2: Index of National Normative Aspects | |
| Overhead electrical lines exceeding AC 45 kV - Part 1: General requirements - Common specifications | |
| Overhead electrical lines exceeding AC 45 kV - Part 2: Index of National Normative Aspects | |
| Overhead electrical lines exceeding AC 45 kV - Part 3: Set of National Normative Aspects | |
| Overhead electrical lines exceeding AC 45 kV Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012) | |
| Overhead electrical lines exceeding AC 45 kV | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single... | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2: Type 4 / 8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and... | |
| Piezoelectric properties of ceramic materials and components Part 1: Terms and definitions | |
| Piezoelectric properties of ceramic materials and components Part 2: Methods of measurement Low power | |
| Piezoelectric properties of ceramic materials and components Part 3: Methods of measurement High power | |
| Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 2-1: Residential, commercial and industrial environment Immunity requirements | |
| Procedure for the assessment of the exposure of workers to electromagnetic fields | |
| Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz -... | |
| Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic restrictions related to public exposure to radio frequency electromagnetic fields (3 MHz -... | |
| Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the... | |
| Product Standard to Demonstrate the Compliance of Mobile Phones with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (300 MHz - 3 GHz) | |
| Product Standard to Demonstrate the Compliance of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure... | |
| Product standard to demonstrate the compliance of stand alone broadcast transmitters with the reference levels or the basic restrictions related to public human exposure to radio frequency electromagnetic fields (30... | |
| Product Standard to Demonstrate the Compliances of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure... | |
| Proximity Devices - Requirements for Proximity Devices with Analogue Output | |
| Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line | |
| Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) | |
| Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line | |
| Railway applications - Energy measurement on board train Part 3: Data handling | |
| Railway applications - Energy measurement on board trains - Part 1: General | |
| Railway applications - Energy measurement on board trains - Part 2: Energy measuring | |
| Railway applications - Energy measurement on board trains - Part 3: Data handling | |
| Railway applications - Energy measurement on board trains - Part 4: Communication | |
| Railway applications - Energy measurement on board trains - Part 5: Conformity assessment | |
| Railway applications - Energy measurement on board trains Part 1: General | |
| Railway applications - Energy measurement on board trains Part 2: Energy measuring | |
| Railway applications - Energy measurement on board trains | |
| Railway applications - Fixed installations - Electrical protective measures for working on or near an overhead contact line system and/or its associated return circuit | |
| Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups | |
| Railway applications - Fixed installations - Traction transformers | |
| Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability Part 1: General | |
| Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: General requirements | |
| Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single core silicone rubber insulated cables for 120 \xb0C or 150 \xb0C | |
| Railway applications - Railway rolling stock high temperature power cables having special fire performance Part 2: Single core silicone rubber insulated cables for 120 \xb0C or 150 \xb0C | |
| Railway applications - Rolling stock - Electrical connectors, requirements and test methods | |
| Railway applications - Rolling stock - Rules for installation of cabling | |
| Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications \x97 Current collection systems \x97 Pantographs, testing methods for contact strips | |
| Railway applications \x97 Energy measurement on board trains Part 5: Conformity assessment | |
| Railway applications \x97 Railway rolling stock cables having special fire performance \x97 Thin wall \x97 Part 1: General requirements | |
| Railway applications \x97 Railway rolling stock cables having special fire performance \x97 Thin wall \x97 Part 4: Multicore and multipair cables standard wall sheathed The | |
| Railway applications \x97 Rolling stock \x97 Electric equipment in trolley buses \x97 Safety requirements and current collection systems | |
| Railway applications Current collection systems Pantographs, testing methods for carbon contact strips | |
| Railway applications Current collection systems Technical criteria for the interaction between pantograph and overhead line (to achieve free access) | |
| Railway applications Fixed installations Electric traction Insulating synthetic rope assemblies for support of overhead contact lines | |
| Railway applications Fixed installations Electronic power convertors for substations | |
| Railway applications Fixed installations Traction transformers | |
| Railway applications Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability | |
| Railway Applications Railway Rolling Stock Cables Having Special Fire Performance Test Methods | |
| Railway applications Railway rolling stock cables having special fire performance Thin wall and standard wall Guide to use | |
| Railway applications Railway rolling stock cables having special fire performance Thin wall Part 2: Single core cables | |
| Railway applications Railway rolling stock cables having special fire performance Thin wall Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed | |
| Railway applications Rolling stock Rules for installation of cabling | |
| Railways applications \x97 Fixed installations and rolling stock \x97 Criteria to achieve technical compatibility between pantographs and overhead contact line | |
| Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables | |
| Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks | |
| Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports | |
| Roofing Products from Metal Sheets - Specification for Fully Supported Roofing Products of Copper Sheet | |
| Roofing Products from Metal Sheets - Specification for Fully Supported Roofing Products of Steel Sheet | |
| Routine Tests for Controls within the Scope of the EN 60730 Series - Part 1: General Requirements | |
| Safety devices required for the safe functioning of equipment with respect to explosion risks | |
| Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers | |
| Safety of Household and Similar Electrical Appliances - Particular Requirements For Pedestrian Controlled Battery Powered Electrical Lawnmowers | |
| Satellite signal distribution over a single coaxial cable in single dwelling installations | |
| Solar cells Datasheet information and product data for crystalline silicon solar cells | |
| Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing | |
| Sound System Equipment - Headphones and Earphones Associated with Portable Audio Equipment - Maximum Sound Pressure Level Measurement Methodology and Limit Considerations - Part 1: General Method for "One Package... | |
| Sound system equipment: headphones and earphones associated with personal music players \x97 maximum sound pressure level measurement methodology Part 3: measurement method for sound dose management | |
| Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or... | |
| Space product assurance The manual soldering of high-reliability electrical connections | |
| Space product assurance Wire-wrapping of high-reliability electrical connections | |
| Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment | |
| Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 1: General requirements and test methods | |
| Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances... | |
| Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements | |
| Straight thermocouple assembly with metal or ceramic protection tube and accessories | |
| Switches for household and similar fixed electrical installations - Collateral standard - Fireman\x92s switches for exterior and interior signs and luminaires | |
| Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) | |
| Switches for household and similar fixed electrical installations Collateral standard Switches and related accessories for use in home and building electronic systems (HBES) | |
| Telecommunications bonding networks for buildings and other structures | |
| Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV | |
| Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic... | |
| Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities | |
| Test requirements for low voltage aerial bundled cable accessories - Part 2: Tension and suspension clamps for self supporting system | |
| Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutral messenger system | |
| Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors | |
| Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test | |
| Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing | |
| Testing methodology for wipers used in electrical insulating oil | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating... | |
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised... | |
| Tracked Changes (Redline) - Alarm systems - Combined and integrated alarm systems Part 1: General requirements | |
| Tracked Changes (Redline) - Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle | |
| Tracked Changes (Redline) - Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document | |
| Tracked Changes (Redline) - Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results... | |
| Tracked Changes (Redline) - Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance | |
| Tracked Changes (Redline) - Communication cables - Specifications for test methods Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable | |
| Tracked Changes (Redline) - Communication cables \x97 Specifications for test methods Part 1-1: Electrical test methods \x97 General requirements | |
| Tracked Changes (Redline) - Communication cables \x97 Specifications for test methods Part 1-8: Electrical test methods \x97 Attenuation | |
| Tracked Changes (Redline) - Communication cables \x97 Specifications for test methods Part 1-9: Electrical test methods \x97 Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) | |
| Tracked Changes (Redline) - Communication cables \x97 Specifications for test methods Part 4-16: Environmental test methods \x97 Circuit integrity under fire conditions | |
| Tracked Changes (Redline) - Communication cables Part 2-20: Common design rules and construction \x97 General | |
| Tracked Changes (Redline) - Communication cables Part 2-29: Common design rules and construction \x97 Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables | |
| Tracked Changes (Redline) - Communication cables Part 4-1: General considerations for the use of cables \x97 Environmental conditions and safety aspects | |
| Tracked Changes (Redline) - Conductor cars | |
| Tracked Changes (Redline) - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex... | |
| Tracked Changes (Redline) - Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 2: Accessories... | |
| Tracked Changes (Redline) - Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 3: Guide... | |
| Tracked Changes (Redline) - Data sheet for photovoltaic inverters | |
| Tracked Changes (Redline) - Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site | |
| Tracked Changes (Redline) - Earthing of power installations exceeding 1 kV a.c. | |
| Tracked Changes (Redline) - Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen \x97 Requirements on the functional safety of gas detection... | |
| Tracked Changes (Redline) - Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance | |
| Tracked Changes (Redline) - Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C) | |
| Tracked Changes (Redline) - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures for... | |
| Tracked Changes (Redline) - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-6: Multi- mode mechanical fibre splice | |
| Tracked Changes (Redline) - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications \x97 Part 6-1: Unprotected microduct for category S and... | |
| Tracked Changes (Redline) - Fibre management systems and protective housings to be used in optical fibre communication systems \x97 Product specifications Part 3-3: Singlemode optical fibre fusion splice protectors | |
| Tracked Changes (Redline) - Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises Part 1: Test methods and performance requirements | |
| Tracked Changes (Redline) - Industrial systems, installations and equipment and industrial products \x97 Structuring principles and reference designations \x97 Part 1: Basic rules | |
| Tracked Changes (Redline) - Lead-acid starter batteries \x97 Part 5: Mechanical properties of battery housings and handles | |
| Tracked Changes (Redline) - Live Working - Electrically insulating helmets for use on low and medium voltage installations | |
| Tracked Changes (Redline) - Marking and documentation requirements for Photovoltaic Modules | |
| Tracked Changes (Redline) - Overhead electrical lines exceeding AC 1 kV - Part 2-18: National Normative Aspects (NNA) for Sweden (based on EN 50341-1:2012) | |
| Tracked Changes (Redline) - Overhead electrical lines exceeding AC 1 kV - Part 2-1: National Normative Aspects (NNAs) for Austria (based on EN 50341-1:2012) | |
| Tracked Changes (Redline) - Overhead electrical lines exceeding AC 1 kV - Part 2-22: National Normative Aspects (NNA) for Poland (based on EN 50341-1:2012) | |
| Tracked Changes (Redline) - Overhead electrical lines exceeding AC 1 kV \x97 Part -2-7: National Normative Aspects (NNA) for FINLAND (based on EN 50341-1:2012) | |
| Tracked Changes (Redline) - Overhead electrical lines exceeding AC 1 kV Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012) | |
| Tracked Changes (Redline) - Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS),... | |
| Tracked Changes (Redline) - Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market... | |
| Tracked Changes (Redline) - Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in... | |
| Tracked Changes (Redline) - Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line | |
| Tracked Changes (Redline) - Railway applications - Energy measurement on board train Part 3: Data handling | |
| Tracked Changes (Redline) - Railway applications - Energy measurement on board trains Part 1: General | |
| Tracked Changes (Redline) - Railway applications - Energy measurement on board trains Part 4: Communication | |
| Tracked Changes (Redline) - Railway applications - Energy measurement on board trains Part 5: Conformity assessment | |
| Tracked Changes (Redline) - Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability... | |
| Tracked Changes (Redline) - Railway applications \x97 Rolling stock \x97 Rules for installation of cabling | |
| Tracked Changes (Redline) - Telecommunications bonding networks for buildings and other structures | |
| Tracked Changes (Redline) \x96 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV | |
| Tracked Changes (Redlines) - Lead-acid starter batteries - Part 6: Batteries for micro-cycle applications | |
| Transportable ventilated rooms with or without an internal source of release | |
| Validation of arc welding equipment | |
| Wind turbines Protective measures Requirements for design, operation and maintenance |
| << Prev | Next >> |