Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
270
280
290
300
310
320
322
323
324
325
326
327
328
329
330
331
332
333
334
340
350
360
370
380
390
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature | |
| Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT \x9291) | |
| Adhesives Adhesives for bonding parquet to subfloor Test methods and minimum requirements | |
| Adhesives for floor coverings Requirements for mechanical and electrical performance | |
| Adhesives for leather and footwear materials Preparation of bonded test pieces by moulding-on processes | |
| Adhesives for leather and footwear materials Solvent-based and dispersion adhesives Determination of sole positioning tack (spotting tack) | |
| Adhesives for non-structural wood applications - Test method and requirements for resistance to static load | |
| Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods | |
| Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff | |
| Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components | |
| Aluminium and aluminium alloys Chemical analysis Sampling from metal melts | |
| Aluminium and aluminium alloys Weldable rolled products for tanks for the storage and transportation of dangerous goods | |
| Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) | |
| Automotive fuels \x97 Assessment of petrol and diesel fuel quality \x97 Sampling from retail site pumps and commercial site fuel dispensers | |
| Baths for domestic purposes | |
| Bidets - Functional requirements and test methods | |
| Bidets Functional requirements and test methods | |
| Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving | |
| Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method | |
| Bitumen and bituminous binders \x97 Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification | |
| Blinds and shutters - Thermal and visual comfort - Test and calculation methods | |
| Blinds and shutters Thermal and visual comfort Performance characteristics and classification | |
| Brazing - Guidance on the application of brazed joints | |
| Cathodic protection of complex structures | |
| Ceramic tiles Definitions, classification, characteristics and marking | |
| Characterization of waste - Calculation of dry matter by determination of dry residue or water content | |
| Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition | |
| Characterization of waste - Leaching behaviour tests - Up-flow percolation test (under specified conditions) | |
| Characterization of waste Determination of hydrocarbon content by gravimetry | |
| Chemical disinfectants and antiseptics \x97 Quantitative suspension test for the evaluation of virucidal activity in the medical area \x97 Test method and requirements (Phase 2/Step 1) | |
| Chemical disinfectants and antiseptics Basic sporicidal activity Test method and requirements (phase 1, step 1) | |
| Chemical disinfectants and antiseptics Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area Test method and requirements (phase 2, step 2) | |
| Chemical disinfectants and antiseptics Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action Test method... | |
| Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants Test methods and requirements (phase 2, step... | |
| Chemical disinfectants and antiseptics Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine Test method and requirements (phase 2, step 1) | |
| Child care articles - Drinking equipment - Safety requirements and test methods | |
| Child care articles \x97 Drinking equipment \x97 Safety requirements and test methods | |
| Child use and care articles Child seats for cycles Safety requirements and test methods | |
| Child use and care articles Cutlery and feeding utensils Safety requirements and tests | |
| Child use and care articles Drinking equipment Part 1: General and mechanical requirements and tests | |
| Child use and care articles Drinking equipment Part 2: Chemical requirements and tests | |
| Child-resistant non-reclosable packaging for pharmaceutical products Requirements and testing | |
| Chimneys - Freeze-thaw resistance test method for chimney products | |
| Chimneys - General Requirements | |
| Chimneys - System chimneys with plastic flue liners - Requirements and test methods | |
| Chimneys System chimneys with plastic flue liners Requirements and test methods | |
| Clamp type coupling assemblies for LPG transfer hoses | |
| Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar | |
| Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment | |
| Copper and copper alloys Electrolytically tinned strip | |
| Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations | |
| Cranes - Power driven winches and hoists - Part 1: Power driven winches | |
| Cranes - Power driven winches and hoists - Part 2: Power driven hoists | |
| Cranes - Safety - Tower cranes | |
| Cranes Equipment for lifting persons Part 1: Suspended baskets | |
| Cranes Equipment for the lifting of persons Part 2: Elevating control stations | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels Large transportable non-vacuum insulated vessels Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels Large transportable non-vacuum insulated vessels Part 3: Operational requirements | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: briquetting pitch Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: carbon binder pitch Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: coating tar Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: impregnating pitch Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: painting tar Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: refractory binders Characteristics and test methods | |
| Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: road tars Characteristics and test methods | |
| Determination of the auto ignition temperature of gases and vapours | |
| Determination of the uplift resistance of installed clay or concrete tiles for roofing Roof system test method | |
| Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C. | |
| Devices to prevent pollution by backflow of potable water \x97 Pressurised air inlet valves DN 15 to DN 50 \x97 Family L, type A and type B | |
| Devices to prevent pollution by backflow of potable water Hose union backflow preventer DN 15 to DN 32 Family H, type A | |
| Devices to prevent pollution by backflow of potable water In-line anti-vacuum valves DN 8 to DN 80 Family D, type A | |
| Devices to prevent pollution by backflow of potable water Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 Family D, type B | |
| Devices to prevent pollution by backflow of potable water Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 Family D, type C | |
| Directly Heated Positive Temperature Coefficient Thermistors Typically Made from Modified Ferro-Electric Materials | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems | |
| Drainage channels for vehicular and pedestrian areas Classification, design and testing requirements, marking and evaluation of conformity | |
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement | |
| Dust explosion venting protective systems | |
| Execution of special geotechnical works - Soil nailing | |
| Execution of special geotechnical works Reinforced fill | |
| Explosion resistant equipment | |
| Explosion suppression systems | |
| Fat and oil derivatives \x97 Fatty acid methyl ester (FAME) \x97 Determination of Ca, Mg, Na, K and P content by optical emission spectral analysis with inductively coupled plasma (ICP... | |
| Fertilizers and liming materials - Determination of carbon dioxide Part 1: Method for solid fertilizers | |
| Fertilizers and liming materials Determination of carbon dioxide Part 2: Method for liming materials | |
| Fibre reinforced plastics Glass mat reinforced thermoplastics (GMT) Determination of flowability and solidification | |
| Fibre-Cement Pipelines - Guide for Laying and On-Site Work Practices | |
| Fire fighting pumps Portable pumps Safety and performance requirements, tests | |
| Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders | |
| Fire safety storage cabinets Part 1: Safety storage cabinets for flammable liquids | |
| Fire test - Large-scale room reference test for surface products | |
| Fire-fighting hoses Non-percolating layflat hoses for fixed systems | |
| Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests | |
| Fixed ladders for manholes | |
| Foam producing solutions for leak detection on gas installations | |
| Foodstuffs \x97 Determination of fumonisin B1 and B2 in maize based foods \x97 HPLC method with immunoaffinity column clean up | |
| Foodstuffs Determination of okadaic acid in mussels HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection | |
| Foodstuffs Determination of saxitoxin and dc-saxitoxin in mussels HPLC method using pre-column derivatization with peroxide or periodate oxidation | |
| Foodstuffs Determination of trace elements Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion | |
| Foodstuffs Determination of trace elements Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing | |
| Gas-fired insets for heating more than one room | |
| Gas-loaded accumulators for fluid power applications | |
| General requirements for components specifically designed for use in trenchless construction of drains and sewers | |
| Geosynthetic barriers Test method for determining the resistance to leaching | |
| Geosynthetics \x97 Screening test method for determining chemical resistance for landfill applications | |
| Glass in building Laminated glass and laminated safety glass Evaluation of conformity/Product standard | |
| Glass in building Thermally toughened alkaline earth silicate safety glass Part 1: Definition and description | |
| Glass in building Thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/Product standard | |
| Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods | |
| Harmonized system of quality assessment for electronic components: Generic specification: Directly heated negative temperature coefficient thermistors | |
| Health informatics - A syntax to represent the content of medical classification systems - ClaML | |
| Health informatics - Guidance for handling personal health data in international applications in the context of the EU data protection directive | |
| Health informatics - International transfer of personal health data covered by the EU data protection directive - High level security policy | |
| Heat Meters - Part 1: General Requirements | |
| Heat Meters - Part 2: Constructional Requirements | |
| Heat Meters - Part 3: Data Exchange and Interfaces | |
| Heat Meters - Part 4: Pattern Approval Tests | |
| Heat Meters - Part 5: Initial Verification Tests | |
| Heat Meters - Part 6: Installation, Commissioning, Operational Monitoring and Maintenance | |
| Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 Degree C | |
| Heating boilers Heating boilers with forced draught burners Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 \xb0C | |
| Heating Systems in buildings - Design and installation of direct electrical room heating systems | |
| Heating systems in buildings Installation and commissioning of water based heating systems | |
| High strength structural bolting for preloading Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading Part 10: System HRC - Bolt and nut assemblies with calibrated preload | |
| High-strength structural bolting assemblies for preloading Part 1: General requirements | |
| High-strength structural bolting assemblies for preloading Part 2: Suitability test for preloading | |
| High-strength structural bolting assemblies for preloading Part 3: System HR - Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading Part 4: System HV Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading Part 5: Plain washers | |
| High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers | |
| Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned | |
| Hose fittings with clamp units - Part 4: Flange connections | |
| Hose fittings with clamp units - Part 7: Cam locking couplings | |
| Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) | |
| Hose fittings with clamp units Part 1: Requirements, survey, designation and testing | |
| Hose fittings with clamp units Part 2: Hose side parts of hose tail | |
| Hose fittings with clamp units Part 5: Threaded connections | |
| Hose fittings with clamp units Part 6: TW tank truck couplings | |
| Hose fittings with screwed ferrules | |
| Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance | |
| Industrial valves Steel check valves | |
| Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method | |
| Inland navigation vessels - Harbours for inland navigation | |
| Inland navigation vessels - Installation of berths and loading areas | |
| Inland navigation vessels - Studless anchor chain - Round steel link chain | |
| Inland navigation vessels Floating landing stages Requirements, tests | |
| Inspection and testing of LPG road tankers | |
| Irrigation techniques - Meters for irrigation water | |
| Irrigation techniques Irrigation hydrants | |
| Laboratory measurement of airborne and structure-borne sound from service equipment Part 1: Application rules for waste water installations | |
| Laboratory measurement of noise from waste water installations | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications | |
| Laminated Veneer Lumber (LVL) Definitions, classification and specifications | |
| Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather | |
| Leather Physical and mechanical tests Determination of fogging characteristics | |
| Leather Physical and mechanical tests Determination of resistance to horizontal spread of flame | |
| Leather Physical and mechanical tests Determination of water penetration pressure | |
| Leather Physical and mechanical tests Determination of water repellency of garment leather | |
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method | |
| LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction | |
| LPG equipment and accessories \x96 Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders \x96 Periodic inspection | |
| LPG equipment and accessories Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders Procedure for checking before, during and after filling | |
| Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact | |
| Medical Devices - Risk Analysis | |
| Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods | |
| Methods of test for petroleum and its products \x96 BS 2000-49: Bitumen and bituminous binders \x96 Determination of needle penetration | |
| Non active surgical implants Particular requirements for cardiac and vascular implants Specific requirements for arterial stents | |
| Non controllable backflow preventer with different pressure zones Family C, type A | |
| Non fatty foods Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) Part 1: HPLC method with solid phase extraction clean up | |
| Non fatty foods Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) Part 2: HPLC method with gel permeation chromatography clean up | |
| Non fatty foods Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) Part 3: HPLC method with liquid/liquid-partit ion clean up | |
| Non-Destructive Examination of Welds - Radiographic Examination of Welded Joints | |
| Packaging \x97 Collapsible aluminium tubes \x97 Tactile warnings of danger | |
| Packaging Flexible packaging material Determination of puncture resistance Test methods | |
| Packaging Flexible packaging material Determination of residual solvents by dynamic headspace gas chromatography Absolute method | |
| Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant | |
| Particle Filters Used in Respiratory Protective Equipment | |
| Personal eye-equipment Faceshields and visors for use with firefighters\x92 and high performance industrial safety helmets used by firefighters, ambulance and emergency services | |
| Personal protective equipment - Knee protectors for work in the kneeling position Part 1: Test methods | |
| Personal protective equipment - Knee protectors for work in the kneeling position Part 2: Requirements for wearable knee protectors (type 1) | |
| Personal protective equipment - Knee protectors for work in the kneeling position Part 3: Requirements for the individual combination of knee pads and garments (type 2) | |
| Personal protective equipment - Knee protectors for work in the kneeling position Part 5: Requirements for knee mats (type 3) | |
| Personal protective equipment - Knee protectors for work in the kneeling position Part 6: Requirements for kneeling systems (type 4) | |
| Personal protective equipment - Knee protectors for work in the kneeling position | |
| Personal protective equipment \x97 Knee protectors for work in the kneeling position Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) | |
| Personal protective equipment Knee protectors for work in the kneeling position | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Part 1: Composition and preparation of basic mixtures | |
| Pillar fire hydrants | |
| Plastic Piping Systems for Buried and Above-Ground Drainage and Sewerage under Pressure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Piping Components and the System | |
| Plastics pipes and fittings - Utilisation of thermoplastics recyclates Part 1: Vocabulary | |
| Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Ring Flexibility | |
| Plastics Piping Systems - Glass Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Cemented Socket-and-Spigot Joints | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Bolted Flange Joints | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Rigid Locked Socket-and-Spigot Joints with Elastomeric Seals | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure | |
| Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading | |
| Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints | |
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General | |
| Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes | |
| Plastics piping systems for renovation of underground water supply networks Part 1: General | |
| Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes | |
| Plastics piping systems for soil and waste (low and high temperature) within the building structure - Acrylonitrile-butadi ene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system | |
| Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polypropylene (PP) - Part 1: Specifications for Pipes, Fittings and the System | |
| Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 1: General | |
| Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 2: Pipes | |
| Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 3: Fittings | |
| Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 4: Valves and Ancillary Equipment | |
| Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 5: Fitness for Purpose of the System | |
| Plastics Piping Systems with Structured-Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes and the... | |
| Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure | |
| Plywood - Calculation method for some mechanical properties | |
| Portable, Hand-Held, Internal Combustion Cutting-Off Machines - Safety | |
| Postal services - Trays for international letter mail - Test methods and performance requirements | |
| Postal services Quality of service Measurement of the transit time of end-to-end services for bulk mail | |
| Postal services Quality of service Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail | |
| Precast concrete products Concrete with wood-chips as aggregate Requirements and test methods | |
| Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps Part 1: Vessels General requirements | |
| Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Determination of the expansion ratio and expansion evolution | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Determination of the filtration stability | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Volume and weight changes of injection products after air drying and water storage cycles | |
| Products used for treatment of water intended for human consumption Bone charcoal | |
| Products used for treatment of water intended for human consumption Iron-coated granular activated alumina | |
| Products used for treatment of water intended for human consumption Manganese dioxide coated limestone | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing against chemicals Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets | |
| Protective clothing Gloves and armguards protecting against cuts by powered knives Requirements and test methods | |
| Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications - Brake discs for railway rolling stock Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements | |
| Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking Part 6: Step by step calculations for train sets or single vehicles | |
| Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests | |
| Railway applications \x97 Brake discs for railway rolling stock Part 3: Brake discs, performance of the disc and the friction couple, classification | |
| Railway applications \x97 Methods for calculation of stopping and slowing distances and immobilization braking Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles | |
| Railway applications \x97 Methods for calculation of stopping and slowing distances and immobilization braking Part 2: Step by step calculations for train sets or single vehicles | |
| Railway applications Brake discs for railway rolling stock Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications Braking Generic vocabulary | |
| Railway applications Methods for calculation of stopping distances, slowing distances and immobilization braking Part 1: General algorithms | |
| Recreational diving services Requirements for recreational scuba diving service providers | |
| Recreational diving services Safety related minimum requirements for the training of scuba instructors Part 1: Level 1 | |
| Recreational diving services Safety related minimum requirements for the training of scuba instructors Part 2: Level 2 | |
| Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer | |
| Respiratory protective devices - gas cylinder valves - Part 1: Specification for thread connection for insert connector | |
| Respiratory Protective Devices - Gas Cylinder Valves - Part 2: Outlet Connections | |
| Respiratory Protective Devices - Self-Contained Closed-Circuit Breathing Apparatus Compressed Oxygen or Compressed Oxygen-Nitrogen Type - Requirements, Testing, Marking | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only | |
| Respiratory protective devices Gas cylinder valves Part 3: Outlet connections for diving gases Nitrox and oxygen | |
| Respiratory protective devices Gas filter(s) and combined filter(s) Requirements, testing, marking | |
| Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only Requirements, testing, marking | |
| Respiratory Protective Devices. Self-Contained Closed-Circuit Compressed Oxygen Breathing Apparatus Part 2: Specification for Apparatus for Special Use | |
| Rigid plastics containers Methods to test the effectiveness of closures | |
| Road Marking Materials - Road Marking Performance for Road Users | |
| Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics | |
| Road traffic noise reducing devices \x97 Procedures for assessing long term performance | |
| Road traffic noise reducing devices Procedures for assessing long term performance Part 2: Non-acoustical characteristics | |
| Road traffic noise reducing devices Specifications | |
| Rotary positive displacement pumps Performance tests for acceptance | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for operating pressure up to 100 bar | |
| Sanitary appliances \x97 Communal washing troughs | |
| Sanitary appliances Communal washing troughs | |
| Sawn timber - Assessment of drying quality | |
| Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets | |
| Secure storage units Requirements, classification and methods of test for resistance to burglary Secure safe cabinets | |
| Self adhesive tapes Measurement of breaking strength and elongation at break | |
| Self-supporting double skin metal faced insulating panels - Factory made products - Specifications | |
| Shower enclosures - Functional requirements and test methods | |
| Shower enclosures Functional requirements and test methods | |
| Shower trays for domestic purposes | |
| Solid softwood panelling and cladding \x97 Softwood machined profiles with tongue and groove | |
| Space engineering standards Functional analysis | |
| Specification for dedicated liquefied petroleum gas appliances Parasol patio heaters Flueless radiant heaters for outdoor or amply ventilated area use | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Directly heated negative temperature coefficient thermistors (Beads in envelopes) | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Directly heated negative temperature coefficient thermistors (Beads in solid glass or vitreous enamel) | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Directly heated negative temperature coefficient thermistors (Disc type) | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification: directly heated negative temperature coefficient thermistors (Rod type) | |
| Sprayed concrete Part 1: Definitions, specifications and conformity | |
| Sprayed concrete Part 2: Execution | |
| Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V | |
| Structural adhesives Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions Wedge impact method | |
| Structural adhesives Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature | |
| Structural adhesives Qualitative assessment of durability of bonded assemblies Wedge rupture test | |
| Surface active agents - Determination of foamability and degree of foamability - Circulation test method | |
| Surface active agents - Determination of surface tension | |
| Surface active agents Determination of anionic surface active agents Potentiometric two-phase titration method | |
| Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | |
| Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3 | |
| Swap Bodies - Swap Tanks - Dimensions, Requirements, Test Methods, Operation Conditions | |
| Symbols for Timber and Wood-Based Products | |
| Table tennis - Part 2: Posts for net assemblies - Requirements and test methods | |
| Table tennis Part 1: Table tennis tables, functional and safety requirements, test methods | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves | |
| Testing sprayed concrete - Part 4: Bond strength of cores by direct tension | |
| Testing sprayed concrete Part 1: Sampling fresh and hardened concrete | |
| Testing sprayed concrete Part 2: Compressive strength of young sprayed concrete | |
| Testing sprayed concrete Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens | |
| Testing sprayed concrete Part 4: Bond strength of cores by direct tension | |
| Testing sprayed concrete Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens | |
| Testing sprayed concrete Part 6: Thickness of concrete on a substrate | |
| Testing sprayed concrete Part 7: Fibre content of fibre reinforced concrete | |
| Textile floor coverings - Minimum requirements for carpet underlays | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene | |
| Textiles and textile products Burning behaviour of bedding items Classification scheme | |
| Textiles Determination of cotton fibre stickiness Part 1: Method using a manual thermodetection device | |
| Textiles Determination of cotton fibre stickiness Part 2: Method using an automatic thermodetection plate device | |
| Textiles Determination of cotton fibre stickiness Part 3: Method using an automatic thermodetection rotating drum device | |
| Textiles Methods for the determination of certain aromatic amines derived from azo colorants Part 1: Detection of the use of certain azo colorants accessible without extraction | |
| Textiles Methods for the determination of certain aromatic amines derived from azo colorants Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres | |
| Textiles Upholstery fabrics Specification and methods of test | |
| Thermal energy meters Part 1: General requirements | |
| Thermal energy meters Part 2: Constructional requirements | |
| Thermal energy meters Part 4: Pattern approval tests | |
| Thermal energy meters Part 5: Initial verification tests | |
| Thermal energy meters Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (IR) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | |
| Thermal insulation products for buildings - In situ thermal insulation formed from expanded perlite (EP) products Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 2: Specification for the installed products | |
| Thermal insulation products for buildings In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for buildings In-situ thermal insulation formed from expanded perlite (EP) products Part 1: Specification for bonded and loose-fill products before installation | |
| Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample | |
| Timber structures - Connectors - Requirements | |
| Timber structures Structural laminated veneer lumber Requirements | |
| Tracke Changes (Redline) - Thermal insulation products for building equipment and industrial installations \x97 Factory made phenolic foam (PF) products \x97 Specification | |
| Tracked Changes (Redline) - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 1: Terms and definitions | |
| Tracked Changes (Redline) - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 2: Test conditions | |
| Tracked Changes (Redline) - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 3: Test methods | |
| Tracked Changes (Redline) - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors Part 4: Requirements | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys \x97 Chemical analysis \x97 Sampling from metal melts | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of needle penetration | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of the softening point \x97 Ring and Ball method | |
| Tracked Changes (Redline) - Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking | |
| Tracked Changes (Redline) - Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition | |
| Tracked Changes (Redline) - Characterization of waste - Leaching behaviour test - Up-flow percolation test (underspecified conditions) | |
| Tracked Changes (Redline) - Chemical disinfectants and antiseptics \x97 Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous... | |
| Tracked Changes (Redline) - Chemical disinfectants and antiseptics \x97 Quantitative suspension test for the evaluation of virucidal activity in the medical area \x97 Test method and requirements (Phase 2/Step 1)... | |
| Tracked Changes (Redline) - Child care articles - Child seats for cycles - Safety requirements and test methods | |
| Tracked Changes (Redline) - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing | |
| Tracked Changes (Redline) - Chimneys - General requirements | |
| Tracked Changes (Redline) - Cranes \x96 Power driven winches and hoists Part 2: Power driven hoists | |
| Tracked Changes (Redline) - Cranes \x97 Tower cranes | |
| Tracked Changes (Redline) - Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method | |
| Tracked Changes (Redline) - Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement... | |
| Tracked Changes (Redline) - Explosion resistant equipment | |
| Tracked Changes (Redline) - Explosion suppression systems | |
| Tracked Changes (Redline) - Fat and oil derivatives \x97 Fatty acid methyl ester (FAME) \x97 Determination of Ca, Mg, Na, K and P content by optical emission spectral analysis with... | |
| Tracked Changes (Redline) - Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids | |
| Tracked Changes (Redline) - Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar) | |
| Tracked Changes (Redline) - Gas-loaded accumulators for fluid power applications | |
| Tracked Changes (Redline) - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods | |
| Tracked Changes (Redline) - Heat meters Part 3: Data exchange and interfaces | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 10: System HRC - Bolt and nut assemblies with calibrated preload | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 1: General requirements | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 3: System HR - Hexagon bolt and nut assemblies | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 4: System HV \x97 Hexagon bolt and nut assemblies | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 5: Plain washers | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 7: System HR \x96 Countersunk head bolt and nut assemblies | |
| Tracked Changes (Redline) - High-strength structural bolting assemblies for preloading Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | |
| Tracked Changes (Redline) - Hose fittings with clamp units - Part 2: Hose side parts of hose tail | |
| Tracked Changes (Redline) - Hose fittings with clamp units - Part 4: Flange connections | |
| Tracked Changes (Redline) - Hose fittings with clamp units \x97 Part 7: Cam locking couplings | |
| Tracked Changes (Redline) - Inland navigation vessels \x97 Floating landing stages and floating bridges on inland waters \x97 Requirements, tests | |
| Tracked Changes (Redline) - Laboratory measurement of airborne and structure-borne sound from service equipment \x97 Part 1: Application rules for waste water installations | |
| Tracked Changes (Redline) - Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method | |
| Tracked Changes (Redline) - LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling | |
| Tracked Changes (Redline) - LPG equipment and accessories \x97 Inspection and testing of LPG road tankers | |
| Tracked Changes (Redline) - LPG equipment and accessories \x97 Transportable refillable composite cylinders for LPG \x97 Design and construction | |
| Tracked Changes (Redline) - LPG equipment and accessories \x97 Transportable refillable welded steel cylinders for LPG \x97 Design and construction | |
| Tracked Changes (Redline) - Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods | |
| Tracked Changes (Redline) - Milk and milk powder \x97 Determination of aflatoxin M1 content \x97 Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography | |
| Tracked Changes (Redline) - Personal eye-equipment - High performance visors intended only for use with protective helmets | |
| Tracked Changes (Redline) - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadi ene-styrene (ABS) - Part 1: Specifications for pipes,... | |
| Tracked Changes (Redline) - Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail | |
| Tracked Changes (Redline) - Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Tracked Changes (Redline) - Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking Part 2: Step by step calculations for train sets or single vehicles... | |
| Tracked Changes (Redline) - Railway applications \x96 Brake discs for railway rolling stock Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements... | |
| Tracked Changes (Redline) - Railway applications \x96 Brake discs for railway rolling stock Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements | |
| Tracked Changes (Redline) - Railway applications \x96 Braking \x96 Generic vocabulary | |
| Tracked Changes (Redline) - Respiratory protective devices - Gas cylinder valves Part 2: Outlet connections | |
| Tracked Changes (Redline) - Road traffic noise reducing devices - Procedures for assessing long term performance Part 2: Non-acoustical characteristics | |
| Tracked Changes (Redline) - Road traffic noise reducing devices \x97 Procedures for assessing long term performance Part 1: Acoustical characteristics | |
| Tracked Changes (Redline) - Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment | |
| Tracked Changes (Redline) - Sawn timber - Assessment of drying quality | |
| Tracked Changes (Redline) - Secure storage units \x96 Requirements, classification and methods of test for resistance to burglary \x96 Secure safe cabinets | |
| Tracked Changes (Redline) - Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use | |
| Tracked Changes (Redline) - Sprayed concrete - Part 1: Definitions, specifications and conformity | |
| Tracked Changes (Redline) - Stationary source emissions \x97 Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V | |
| Tracked Changes (Redline) - Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | |
| Tracked Changes (Redline) - Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves | |
| Tracked Changes (Redline) - Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves... | |
| Tracked Changes (Redline) - Testing sprayed concrete \x97 Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens | |
| Tracked Changes (Redline) - Textile floor coverings - Minimum requirements for carpet underlays | |
| Tracked Changes (Redline) - Textiles and textile products - Burning behaviour of bedding items - Classification scheme | |
| Tracked Changes (Redline) - Thermal energy meters - Part 1: General requirements | |
| Tracked Changes (Redline) - Thermal energy meters - Part 4: Pattern approval tests | |
| Tracked Changes (Redline) - Thermal energy meters - Part 5: Initial verification tests | |
| Tracked Changes (Redline) - Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Tracked Changes (Redline) - Thermal energy meters \x97 Part 2: Constructional requirements | |
| Tracked Changes (Redline) - Thermal energy meters Part 5: Initial verification tests | |
| Tracked Changes (Redline) - Timber structures - Calculation and verification ofcharacteristic values | |
| Tracked Changes (Redline) - Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification | |
| Tracked Changes (Redline) - Wood-based panels \x97 Melamine faced boards for interior uses \x97 Test methods | |
| Tracked Changes (Redline) - Wood-based panels \x97 Wood veneer floor coverings | |
| Tracked Changes (Redline) - Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods | |
| Transportable gas cylinders Bursting disc pressure relief devices (excluding acetylene gas cylinders) | |
| Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) Design and Construction | |
| Transportable Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) - Design and Construction | |
| Transportable Refillable Welded Steel Cylinders for Liquefied Petroleum Gas (LPG) - Periodic Requalification | |
| Underground fire hydrants | |
| Ventilation for buildings \x97 Air terminal devices \x97 Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes | |
| Ventilation for buildings Chilled beams Testing and rating of passive chilled beams | |
| Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture | |
| Vitreous and porcelain enamels Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours | |
| Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 1: Determination of resistance to chemical corrosion by acids at room temperature | |
| Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel | |
| Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel | |
| Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 5: Determination of resistance to chemical corrosion in closed systems | |
| Vitreous and porcelain enamels High voltage test | |
| Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters | |
| Water quality Detection of human enteroviruses by monolayer plaque assay | |
| Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys | |
| Welding consumables Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels Classification | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets | |
| Windows and doors \x96 Product standard, performance characteristics Part 2: Internal pedestrian doorsets | |
| Wood flooring - Characteristics, evaluation of conformity and marking | |
| Wood flooring Characteristics, evaluation of conformity and marking | |
| Wood-based panels Melamine faced boards for interior uses Definition, requirements and classification | |
| Wood-based panels Melamine faced boards for interior uses Test methods | |
| Wood-based panels Wood veneer floor covering | |
| Workplace atmospheres - Determination of diesel particulate matter - General requirements | |
| Writing boards for educational institutions Ergonomic, technical and safety requirements and their test methods | |
| Zinc and zinc alloys - Secondary raw material |
| << Prev | Next >> |