Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
298
299
300
301
302
303
304
305
306
307
308
309
310
320
330
340
350
360
370
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesion of Aperture- Card Protection Sheets | |
| Aerospace - MJ Threads Part 1: General Requirements | |
| Aerospace - MJ Threads Part 2: Limit Dimensions for Bolts and Nuts | |
| Aerospace - MJ Threads Part 3: Limit Dimensions for Fittings for Fluid Systems | |
| Agricultural Food Products Part 1: Determination of Crude Fibre Content (General Method) | |
| Agricultural Food Products Part 2: Determination of Crude Fibre Content (Modified Scharrer Method) | |
| Breathing Tubes for Use with Anaesthetic Apparatus and Ventilators | |
| Building and civil engineering - Vocabulary - Part 3: Civil engineering - General | |
| Building and civil engineering - Vocabulary - Part 4: Transport | |
| Building and civil engineering - Vocabulary - Part 6: Construction parts | |
| Building and civil engineering - Vocabulary - Part 7: Services | |
| Building and civil engineering - Vocabulary - Part 8: Work with timber and wood-based panels | |
| Building and civil engineering - Vocabulary - Part 9: Work with concrete and plaster | |
| Building and civil engineering - Vocabulary Part 5: Civil engineering - Water engineering, environmental engineering and pipelines | |
| Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.5: Hydraulic Engineering and Construction Work | |
| Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.6: Natural Waters. Inland. Coastal. Marine | |
| Building and Civil Engineering Terms Part 3: Services Section 3.2: Internal Communication and Transport Subsection 3.2.2: Internal Transport | |
| Building and Civil Engineering Terms Part 3: Services Section 3.3: Sanitation | |
| Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.4: Admixtures | |
| Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.6: Products, Applications and Operations Subsection 6.6.1: Concrete and Mortar | |
| Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.6: Products, Applications and Operations Subsection 6.6.2: Plaster | |
| Caseins and Cadeinates Part 10: Method for Determination of Fats (Gravimetric Reference Method) | |
| Caseins and Caseinates - Part 7: Method for Determination of Protein Content (Reference Method) | |
| Caseins and Caseinates - Part 8: Method for Determination of Water Content (Reference Method) | |
| Caseins and Caseinates Part 11: Method for the Determination of Nitrate and Nitrite Contents | |
| Caseins and Caseinates Part 1: General Introduction, Including Preparation of Laboratory Samples | |
| Caseins and Caseinates Part 2: Method for Determination of 'Fixed Ash' of Caseins (Reference Method) | |
| Caseins and Caseinates Part 3: Method for Determination of Ash of Rennet Caseins and Caseinates (Reference Method) | |
| Caseins and Caseinates Part 4: Method for Determination of pH (Reference Method) | |
| Caseins and Caseinates Part 5: Method for Determination of Free Acidity of Caseins (Reference Method) | |
| Caseins and Caseinates Part 6: Method for Determination of Lactose Content (Photometric Method) | |
| Caseins and Caseinates Part 9: Method for the Determination of Scorched Particles | |
| Cleaning and Surface Repair of Buildings Part 2: Concrete and Precast Concrete Masonry | |
| Cleaning Equipment for Air or Other Gases | |
| Code of practice for care and maintenance of floor surfaces. Sheet and tile flooring | |
| Code of practice for Cleaning and Surface Repair of Buildings - Part 1: Natural Stone, Cast Stone and Clay and Calcium Silicate Brick Masonry | |
| Code of practice for Cleaning and surface repair of buildings - Part 3: Metals (cleaning only) | |
| Code of Practice for Demolition | |
| Code of practice for fixed offshore structures | |
| Code of Practice for Glazing for Buildings Part 4: Safety Related to Human Impact | |
| Code of Practice for Glazing for Buildings | |
| Code of Practice for Painting of Buildings | |
| Code of practice for Performance monitoring of computer-based systems | |
| Code of practice for safe operation of lead-acid stationary cells and batteries | |
| Code of Practice for Safety in Tunnelling in the Construction Industry | |
| Code of Practice for The Selection and Application of Bellows Expansion Joints for Use in Pressure Systems - Part 1: Metallic Bellows Expansion Joints | |
| Commercial Refrigerated Cabinets Part 1: Calculation of Linear Dimensions, Areas and Volumes | |
| Commercial Refrigerated Cabinets Part 3: Determination of Temperature | |
| Commercial Refrigerated Cabinets Part 4: Defrosting Test | |
| Commercial Refrigerated Cabinets Part 5: Determination of Water Vapour Condensation | |
| Commercial Refrigerated Cabinets Part 6: Electrical Energy Consumption Test | |
| Commercial Refrigerated Cabinets Part 8: Test for Accidental Mechanical Contact | |
| Corrosion-Resistant Stainless Steel Fasteners | |
| Couplings on Agricultural Towing Vehicles Part 1: Specification for Hook Type | |
| Cycles - Part 10: Specification for Screw Threads Used to Assemble Head Fittings on Bicycle Forks | |
| Cycles \x97 Part 12: Specification for stem wedge angle | |
| Cycles \x97 Part 15: Specification for dimensions of spoke nipples | |
| Cycles \x97 Part 9: Specification for screw threads used in bottom bracket assemblies | |
| Cycles Part 11: Specification for Assembly Dimensions for Stem and Handlebar Bend | |
| Cycles Part 13: Specification for Mating Dimensions for Splined Hub and Sprocket | |
| Cycles Part 14: Specification for Dimensions of Bottom Bracket Axle and Crank Assembly with Square End Fittings | |
| Cycles Part 16. Specification for replacement brake-blocks | |
| Cycles Part 1: Safety Requirements for Bicycles | |
| Cycles Part 2. Specification for Photometric and Physical Requirements of Reflective Devices | |
| Cycles Part 3: Photometric and Physical Requirements of Lighting Equipment | |
| Cycles Part 4: Glossary of Terms | |
| Cycles Part 5: Bicycle Tyre Designations and Dimensions | |
| Cycles Part 6: Bicycle Rims | |
| Cycles Part 7: Cotter Pins and Assembly of the Axle/ Cotter Pin/Crank | |
| Cycles. Specification for screw threads used to assemble freewheels on bicycle hubs | |
| Dehydrated Garlic | |
| Dehydrated Onion | |
| Dental Tweezers | |
| Determination of Cold Filter Plugging Point of Diesel and Domestic Heating Fuels | |
| Determination of Pressure Drop/Flow Characteristics of Hydraulic Fluid Power Filters | |
| Determining the resistance to picking of paper and board: accelerating speed method using the IGT tester \x97 Part 2: Electric model | |
| Devices with moving parts for the prevention of contamination of water by backflow - Part 2: Specification for terminal anti-vacuum valves of nominal size up to and including DN 54... | |
| Devices with moving parts for the prevention of contamination of water by backflow - Part 3: Specification for in-line anti-vacuum valves of nominal size up to and including DN 42... | |
| Devices with moving parts for the prevention of contamination of water by backflow - Part 4: Specification for combined check and anti-vacuum valves of nominal size up to and including... | |
| Devices with Moving Parts for the Prevention of Contamination of Water by Backflow Part 1: Check Valves of Nominal Size up to and Including DN 54 | |
| Devices without moving parts for the prevention of contamination of water by backflow - Part 2: Specification for type B air gaps | |
| Devices Without Moving Parts for the Prevention of Contamination of Water by Backflow Part 1: Specification for Type A Air Gaps | |
| Devices Without Moving Parts for the Prevention of Contamination of Water by Backflow Part 3: Pipe Interrupters of Nominal Size up to and Including DN 42 | |
| Dimensions of Housings for Hydraulic Seals Incorporating Bearing Rings for Hydraulic Applications | |
| Domestic and Contract Furniture - Part 4: Guide to the Provision of Information | |
| Domestic and Contract Furniture Part 1: Performance Requirements for Seating | |
| Domestic and contract furniture. Specification for performance requirements for cabinet furniture | |
| Domestic and contract furniture. Specification for performance requirements for tables and trolleys | |
| Domestic Kitchen Equipment - Part 3: Performance Requirements for Durability of Surface Finish and Adhesion of Surfacing and Edging Materials - Specification | |
| Domestic Kitchen Equipment - Part 4: Code of Practice for Protection, Storage and Installation of Fitted Kitchen Units | |
| Domestic Kitchen Equipment Part 1: Coordinating Dimensions | |
| Domestic kitchen equipment Part 2: Fitted kitchen units, peninsular units, island units and breakfast bars - Performance requirements and test methods | |
| Domestic Kitchen Equipment Part 2: Specification for Strength Requirements and Methods of Test for Fitted Kitchen Units | |
| Domestic Kitchen Equipment Part 5: Specification for Strength Requirements and Methods of Test for Peninsular Units, Island Units and Breakfast Bars | |
| Drawbars and Towing Hooks on Agricultural Tractors | |
| Electrical Insulating Materials Based on Mica Part 1: General Requirements | |
| Electrical insulating materials based on mica Part 2. Methods of test | |
| Electrical Measuring Transducers for Converting a.c. Electrical Quantities into d.c. Electrical Quantities Part 1: Method for Specifying General Purpose Transducers | |
| Electrical Measuring Transducers for Converting a.c. Electrical Quantities into d.c. Electrical Quantities Part 2: Method for Specifying Transducers for Outdoor Use and Other Severe Environments | |
| Fire Protection for Electronic Data Processing Installations | |
| Fixed Capacitors for Use in Electronic Equipment Part 1: Methods of Test | |
| Fixed Capacitors for Use in Electronic Equipment Part 3: Fixed Capacitors for Radio Interference Suppression. Selection of Methods of Test and General Requirements | |
| Flat Roofs with Continuously Supported Coverings | |
| Format and Content of Manuals on Operation and Maintenance for Earth- Moving Machinery | |
| Glass bottles for carbonated soft drinks - Part 1: Specification for 750 ml and 1 litre multi-trip bottles | |
| Glazing for buildings - Part 1: General methodology for the selection of glazing | |
| Glazing for buildings - Part 2: Code of practice for energy, light and sound | |
| Glazing for buildings - Part 3: Code of practice for fire, security and wind loading | |
| Glazing for buildings - Part 6: Code of practice for special applications | |
| Glazing for buildings Part 7: Code of practice for the provision of information | |
| Glossary of Building and civil engineering terms - Part 2: Civil engineering - Section 2.3 Superstructures. Bridges. Large span structures | |
| Glossary of Building and civil engineering terms - Part 2: Civil engineering - Section 2.4 Highway, railway and airport engineering - Subsection 2.4.3 Airport engineering | |
| Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.4: Highway and Railway Engineering Subsection 2.4.2: Railway Engineering | |
| Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.4: Highway, Railway and Airport Engineering Subsection 2.4.1: Highway Engineering | |
| Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.7: Public Health. Environmental Engineering | |
| Glossary of Building and Civil Engineering Terms Part 2: Civil Engineering Section 2.8: Pipelines and Ducts | |
| Glossary of Building and Civil Engineering Terms Part 3: Services Section 3.1: Energy Sources and Distribution | |
| Glossary of Building and Civil Engineering Terms Part 3: Services Section 3.2: Internal Communication and Transport Subsection 3.2.1: Internal Communication | |
| Glossary of Building and Civil Engineering Terms Part 3: Services Section 3.4: Lighting | |
| Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.1: Characteristics and Properties of Timber and Wood Based Panel Products | |
| Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.2: Sizes and Quantities of Solid Timber | |
| Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.3: Wood Based Panel Products | |
| Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.4: Carpentry and Joinery | |
| Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.5: Cork | |
| Glossary of Building and Civil Engineering Terms Part 5: Masonry Section 5.1: Terms Common to Masonry | |
| Glossary of Building and Civil Engineering Terms Part 5: Masonry Section 5.2: Stone | |
| Glossary of Building and Civil Engineering Terms Part 5: Masonry Section 5.3: Bricks and Blocks | |
| Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.1: Binders | |
| Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.2: Concrete | |
| Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.3: Aggregates | |
| Glossary of Building and Civil Engineering Terms Part 6: Concrete and Plaster Section 6.5: Formwork | |
| Glossary of terms for packages of yarns and intermediate textile products | |
| Glossary of terms relating to fabrics and associated fibres, yarns and processes | |
| Glossary of Terms Relating to Household Sewing Machines | |
| Glossary of terms used in the adhesives industry | |
| Graphical Symbols for Use on Electrical Equipment | |
| Guide to design structure diagrams for use in program design and other logic applications | |
| Guide to fire characteristics and fire performance of expanded polystyrene (EPS) used in building applications | |
| Guide to Selection and use of elastomeric bearings for vibration isolation of buildings | |
| Guide to the Determination and Use of Quality Related Costs | |
| Guide to the Economics of Quality - Part 2: Prevention, Appraisal and Failure Model | |
| Guide to the Economics of Quality Part 1: Process Cost Model | |
| Hose and Hose Assemblies for Asphalt and Bitumen - Part 1: Specification for Flexible Metallic Hose and Hose Assemblies | |
| Hose and Hose Assemblies for Asphalt and Bitumen Part 2: Specification for Rubber Hose and Hose Assemblies | |
| Hydraulic Fluid Power Filter Elements Part 1: Method of Evaluating Filtration Performance (Multi-Pass Method) | |
| Hydraulic Fluid Power Filter Elements Part 2: Method of Test to Verify Structural Integrity | |
| Hydraulic Fluid Power Filter Elements Part 3: Marking | |
| Impact Performance Requirements for Flat Safety Glass and Safety Plastics for Use in Buildings | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 13: Specification for Rectangular Moulded Tubes | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 1: Classification and Methods of Test | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 3: Round Pultruded Rods | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 4: Rectangular Moulded Rods | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 7: Hexagonal Pultruded Rods | |
| Industrial Laminated Rods and Tubes Based on Thermosetting Resins Part 8: Round Rolled Tubes | |
| Industrial laminated rods and tubes based on thermosetting resins. Part 2: Specification for round moulded rods | |
| Industrial laminated rods and tubes based on thermosetting resins. Part 5: Specification for rectangular pultruded rods | |
| Industrial laminated rods and tubes based on thermosetting resins. Part 6: Specification for hexagonal moulded rods | |
| Industrial laminated rods and tubes based on thermosetting resins. Part 9: Specification for round moulded tubes | |
| Industrial Laundry Machinery - Part 1: Methods for the Assessment of the Effect of Rotary Washing Machines on Textiles | |
| Industrial Laundry Machinery - Part 5: Methods for the Assessment of the Effect of Shaped Garment Finishing Machinery on Textiles | |
| Industrial Laundry Machinery Part 2. Methods for the Assessment of the Effect of Extracting Machines on Textiles | |
| Industrial Laundry Machinery Part 3: Methods for the Assessment of the Effect of Flatwork Ironing Machines on Textiles | |
| Industrial Laundry Machinery Part 4: Methods for the Assessment of the Effect of Batch Drying Tumblers on Textiles | |
| Installation couplers intended for permanent connection in fixed installations | |
| Installation of Gas Catering Appliances for Use in All Types of Catering Establishments (1st, 2nd and 3rd Family Gases) | |
| Intrinsically safe power supplies for use in coal mines - Part 2: Specification for a.c. power supplies | |
| Intrinsically safe power supplies for use in coal mines - Part 3: Specification for rechargeable battery units | |
| Intrinsically Safe Power Supplies for Use in Coal Mines Part 1: d.c. Power Supplies | |
| Involute Splines: Metric Module Part 1: Dimensions and Tolerances | |
| Jointing Materials for Plasterboard | |
| Joist hangers. Specification for joist hangers for building into masonry walls of domestic dwellings | |
| Lead-Acid Stationary Cells and Batteries Part 4: Lead-Acid Valve Regulated Sealed Type | |
| Lead-Acid Stationery Cells and Batteries Part 1: General Requirements | |
| Lead-Acid Stationery Cells and Batteries Part 2: Lead-Acid High Performance. Plantea Positive Type | |
| Lead-Acid Stationery Cells and Batteries Part 3: Lead-Acid Pasted Positive Plate Type | |
| Lifting slings - Part 3: Guide to selection and safe use of lifting slings for multi-purposes | |
| Lifting slings Part 1: Methods of rating | |
| Lifting Slings Part 2: Marking | |
| Low Voltage Switchgear and Controlgear for Industrial Use. Terminal Marking. Terminals for External Associated Electronic Circuit, Components and Contacts | |
| Machine Tool Ball Screws - Part 1: Methods of Calculating Dynamic Load and static load and life ratings | |
| Machine Tool Ball Screws - Part 6: Specification for Ball Nuts and Principal Dimensions of Ball Screws | |
| Machine Tool Ball Screws Part 3: Glossary of Terms | |
| Machine Tool Ball Screws Part 4: Method for Calculation of Static Axial Rigidity | |
| Machine Tool Ball Screws Part 5: Nominal Diameters and Nominal Leads | |
| Machine tool ball screws. Specification for accuracy, including geometrical tests | |
| Macrographic Examination of Steel by Sulphur Print (Baumann Method) | |
| Magnetic Tape Sound Recording and Reproducing Systems - Part 10: Specification for Time and Address Codes | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 11: Guide to an Address Code for Compact Cassettes | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 1: Specification for General Conditions and Requirements | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 4: Methods for Measuring the Mechanical Characteristics of Magnetic Tape for Analogue Recording | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 5: Specification for Electrical Magnetic Tape Properties | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 6: Specification for Reel-to-Reel Systems | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 7: Cassettes for Commercial Tape Records and Domestic Use | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 8: Eight-Track Magnetic Tape Cartridge for Commercial Tape Records and Domestic Use | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 9: Magnetic Tape Cartridge for Professional Use | |
| Magnetic tape sound recording and reproducing systems. Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape | |
| Magnetic tape sound recording and reproducing systems. Specification for calibration tapes | |
| Mail Processing Machines - Part 1: Glossary of Terms for Letter Opening Machines | |
| Mail Processing Machines - Part 2: Glossary of Terms for Letter Folding Machines | |
| Mail Processing Machines - Part 3: Glossary of Terms for Addressing Machines | |
| Mail processing machines - Part 4: Specification for minimum information to be included in specification sheets of postal franking machines | |
| Mail Processing Machines - Part 5: Glossary of Terms for Document Inserting Machines | |
| Materials and Material Assemblies Used in Clothing for Protection Against Heat and Flame Part 1: Flammability Testing and Performance | |
| Measurement for Radio Equipment Used in the Mobile Services Part 2: Transmitters Employing A3 or F3 Emissions | |
| Measurement for Radio Equipment Used in the Mobile Services Part 6: Methods of Measurement for Selective-Calling and Data Equipment | |
| Measurement for Radio the Equipment Used in Mobile Services Part 4: Transmitters Employing Single Sideband Emissions (A3A, A3H, or A3J) | |
| Measurement of Liquid Flow in Closed Conduits Using Weighing and Volumetric Methods Part 1: Weighing Method Section 1.2: Procedures for Checking Static Weighing Systems | |
| Measurement of Liquid Flow in Closed Conduits Using Weighing and Volumetric Methods Part 1: Weighing Method | |
| Measurement of Liquid Flow in Closed Conduits Using Weighing and Volumetric Methods Part 2: Method for Measurement by Collection of the Liquid in a Volumetric Tank | |
| Measurement of the Pitch Temperature of Quartz- Tungsten-Halogen Lamps | |
| Measurement of Tool Movement Time of Earth-Moving Machinery | |
| Measurement of Total or Effective Thickness of Thin Surface-Hardened Layers in Steel | |
| Mechanical cable glands \x97 Part 3: Specification for special corrosion resistant glands | |
| Mechanical Cable Glands Part 1: Specification for Metallic Glands | |
| Mechanical Cable Glands Part 2: Polymeric Glands | |
| Mechanical Cable Glands Part 5: Code of Practice for Selection, Installation and Inspection of Cable Glands Used in Electrical Installations | |
| Mechanical Properties of Fasteners Part 1: Bolts, Screws and Studs | |
| Mechanical Properties of Fasteners Part 3: Set Screws and Similar Threaded Fasteners Not Under Tensile Stresses | |
| Method for determination of length and length distribution of staple fibres by measurement of single fibres | |
| Method for determination of the preventive action of wood preservatives against | |
| Method for determination of the specific strength factor of textile machinery hollow section guide rollers | |
| Method for determination of the toxic values of wood preservatives against | |
| Method for determination of tumbler strength of iron ores | |
| Method for determining the luminance distribution of electro-optical X-ray image intensifiers | |
| Method for Determining the resistance to picking of paper and board: accelerating speed method using the IGT tester - Part 1: Pendulum or spring model | |
| Method for Evaluating the application of and interaction between components in upholstered furniture | |
| Method for Grading and Visual Classification of Muscovite Mica Splittings | |
| Method for Measurement of Volumetric Ratings of Elevating Scrapers Used for Earth-Moving | |
| Method for Measuring partial discharges in instrument transformers [IEC title: Instrument transformers - Part 4: Measurement of partial discharges] | |
| Method for Measuring the Conversion Factor of Electro-Optical X-Ray Image Intensifiers | |
| Method for Sampling Pulps for Testing | |
| Method for Volumetric Rating of Dumper Bodies Used for Earth-Moving | |
| Method of Defining Syntactic Metalanguage | |
| Method of test for Air permeability of joints in building | |
| Method of Vacuum (Backsiphonage) Test for Water-Using Appliances | |
| Methods for Determination of Bulk Density of Iron Ores | |
| Methods for sampling coal tar and its products | |
| Methods for Sampling of Animal and Vegetable Fats and Oils | |
| Methods for ultrasonic testing and for specifying quality levels of ferritic steel castings | |
| Methods of measurement for radio equipment used in the mobile services. General definitions and standard conditions of measurement | |
| Methods of measurement for radio equipment used in the mobile services. Receivers employing single-sideband techniques (A3A, A3H or A3J) | |
| Methods of measurement for radio equipment used in the mobile services. Receivers for A3 or F3 emissions | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 14: Determination of Infra-Red Reflectance | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 15: Determination of Electrical Breakdown Potential | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 16: Rating System for the Evaluation of Pitting Corrosion - Chart Method | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 17: Rating System for the Evaluation of Pitting Corrosion - Grid Method | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 4: Assessment of Sealing Quality by Measurement of the Loss of Mass After Immersion in Acid... | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 6: Assessment of Sealing Quality by Measurement of Admittance or Impedance | |
| Methods of test for Anodic oxidation coatings on aluminium and its alloys - Part 7: Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys - Part 8: Determination of the Fastness to Ultraviolet Light to Coloured Anodic Oxide Coatings | |
| Methods of test for Anodic oxidation coatings on aluminium and its alloys \x97 Part 18: Determination of surface abrasion resistance | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys Part 12: Measurement of Specular Reflectance and Specular Gloss at Angles of 20 Degrees, 45 Degrees, 60 Degrees... | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys Part 13: Visual Determination of Image Clarity - Chart Scale Method | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys Part 19: Determination of Image Clarity - Instrumental Method | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys Part 2: Determination of Thickness of Anodic Oxide Coatings: Non- Destructive Measurement by Split-Beam Microscope | |
| Methods of Test for Anodic Oxidation Coatings on Aluminium and Its Alloys Part 5: Estimation of Loss of Absorptive Power of Sealed Coatings: Dye Spot Test with Prior Acid Treatment... | |
| Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in phosphoric-chromic acid solution | |
| Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of mass per unit area of anodic oxide coatings (gravimetric method) | |
| Methods of Test for Anodic Oxidation Coatings on Aluminum and Its Alloys - Part 11: Measurement of Total Reflectance Using a Photoelectric Reflectometer | |
| Methods of Test for Anodic Oxidation Coatings on Aluminum and Its Alloys - Part 9: Measurement of Wear Properties with an Abrasive Wheel Wear Test Apparatus | |
| Methods of Test for Anodic Oxidation Coatings on Aluminum and Its Alloys Part 10: Measurement of of Mean Specific Abrasion Resistance with an Abrasive Jet Test Apparatus | |
| Methods of test for bulk density of iron ores. Determination of the bulk density of iron ore samples having a maximum particle size greater than 40 mm | |
| Methods of test for bulk density of iron ores. Determination of the bulk density of iron ore samples having a maximum particle size of 40 mm or smaller | |
| Methods of test for Commercial refrigerated cabinets - Part 7: Electrical tests | |
| Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V - Part 3: Guide to Use | |
| Multi-Trip Glass Bottles for Beer and Cider | |
| Natural Fibre Cords, Lines and Twines | |
| Open Nickel-Cadmium Prismatic Rechargeable Single Cells | |
| Operator's Controls for Earth-Moving Machinery: Crawler Tractors and Crawler Loaders | |
| Painting of buildings - Code of practice | |
| Performance of Rotary Pneumatic Assembly Tools for Threaded Fasteners | |
| Performance Requirements for Seat Belts and Seat Belt Anchorages for Earth-Moving Machinery Fitted with Roll-over Protective Structures | |
| Petri dishes. Part 1: Specification for glass Petri dishes | |
| Petri dishes. Specification for plastics Petri dishes for single use | |
| Petrographic Analysis of Bituminous Coal and Anthracite Part 1: Glossary of Terms Relating to the Petrographic Analysis of Bituminous Coal and Anthracite | |
| Petrographic Analysis of Bituminous Coal and Anthracite Part 2: Method of Preparing Coal Samples for Petrographic Analysis | |
| Petrographic Analysis of Bituminous Coal and Anthracite Part 3: Determining Maceral Group Composition of Bituminous Coal and Anthracite | |
| Petrographic Analysis of Bituminous Coal and Anthracite Part 4: Method of Determining Microlithotype, Carbominerite and Minerite Composition | |
| Petrographic Analysis of Bituminous Coal and Anthracite Part 5: Method of Determining Microscopically the Reflectance of Vitrinite | |
| Planning and Installation of Sound Systems | |
| Polyvinyl chloride boots. Specification for general industrial lined or unlined boots | |
| Prefabricated Sectional Storage Bunkers for Domestic Solid Fuel | |
| Preservation and Storage of Earth- Moving Machinery | |
| Printed Wiring Boards - Part 25: Guide to the Rework and Repair of Soldered Surface Mounted Printed Board Assemblies | |
| Printed Wiring Boards Part 10: Specification for Flex-Rigid Double- Sided Printed Boards with Through Connections | |
| Printed Wiring Boards Part 11: Specification for Flex-Rigid Multilayer Printed Boards with Through Connections | |
| Printed Wiring Boards Part 12: Specification for Mass Lamination Panels (Semi-Manufactured Multilayer Printed Boards) | |
| Printed Wiring Boards Part 1: Guide for the Specification Writer | |
| Printed Wiring Boards Part 20: Guide for the Assembly of Printed Wiring Boards | |
| Printed Wiring Boards Part 21: Guide for the Repair of Printed Wiring Boards | |
| Printed Wiring Boards Part 22: Guide to the Use of Printed Wiring Board Substrate Materials Surface Mount Technology | |
| Printed Wiring Boards Part 23: Guide for the Design and Use of Printed Wiring Boards: Surface Mounted Devices | |
| Printed Wiring Boards Part 24: Guide for the Production of Artwork | |
| Printed Wiring Boards Part 4: Method for Specifying Single and Double Sided Printed Wiring Boards with Plain Holes | |
| Printed Wiring Boards Part 5: Method for Specifying Single and Double Sided Printed Wiring Boards with Plated Through Holes | |
| Printed Wiring Boards Part 6: Method for Specifying Multilayer Printed Wiring Boards | |
| Printed Wiring Boards Part 7: Method for Specifying Single and Double Sided Flexible Printed Wiring Boards without Through Connections | |
| Printed Wiring Boards Part 8: Method for Specifying Single and Double Sided Flexible Printed Wiring Boards with Through Connections | |
| Printed Wiring Boards Part 9: Specification for Flexible Multilayer Boards with Through Connections | |
| Printed wiring boards. Guide for the design and use of printed wiring boards | |
| Printed wiring boards. Methods of test | |
| Procedure for Operator Training for Earth- Moving Machinery | |
| Protective Barriers in and About Buildings | |
| Protective Equipment for Cricketers - Part 1: Specification for Batting Gloves, Leg Guards and Boxes | |
| Protective equipment for cricketers - Part 2: Genital protectors | |
| Protective equipment for cricketers - Part 3: Leg protectors for batsmen, wicket keepers and fielders, and thigh, arm and chest protectors for batsmen | |
| Protective equipment for cricketers - Part 4: Gloves for batsmen | |
| Radio Equipment Used in Mobile Services - Part 8: Methods of Measurement for Antennas | |
| Reaction Torque and Torque Impulse from Hand-Held Pneumatic Assembly Tools for Installing Threaded Fasteners | |
| Recommendations for Minimum Access Dimensions for Earth- Moving Machinery | |
| Recommendations for rating of lifting gear for general purposes | |
| Refrigerated Cabinets Part 2: General Test Conditions | |
| Resistance Seam Welding of Uncoated and Coated Low Carbon Steel | |
| Rolling Bearings: Boundary Dimensions for Radial Bearings | |
| Rolling Bearings: Tolerances Part 1: Glossary of Terms | |
| Rolling Bearings: Tolerances Part 3: Radial Internal Clearance | |
| Rolling bearings: tolerances. Specification for tolerances of radial bearings | |
| Safe Operation of Alkaline Secondary Cells and Batteries | |
| Safe Operation of Traction Batteries | |
| Safe Use of Wire Rope Slings for General Lifting Purposes | |
| Safety and Control Devices for Use in Hot Water Systems - Part 1: Specification for Expansion Valves for Pressures up to and Including 10 Bar | |
| Safety and Control Devices for Use in Hot Water Systems - Part 2: Specification for Temperature Relief Valves for Pressures from 1 Bar to 10 Bar | |
| Safety and Control Devices for Use in Hot Water Systems - Part 3: Specification for Combined Temperature and Pressure Relief Valves for Pressures from 1 Bar to 10 Bar | |
| Safety Devices for Fuel Gases and Oxygen or Compressed Air for Welding, Cutting and Related Processes | |
| Safety devices for use in hot water systems. Specification for drop-tight pressure reducing valves of nominal size up to and including DN 54 for supply pressures up to and including... | |
| Saffron | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 2: Sampling and sample preparation - Section 2.1 Methods for iron and steel | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 2: Sampling and sample preparation - Section 2.2 Methods for ferroalloys and other alloying additives | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.0 Summary of methods | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.1 Determination of aluminium - Subsection 3.1.1 Steel, cast iron, low carbon... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.1 Determination of aluminium - Subsection 3.1.2 Steel and cast iron: spectrophotometric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.1 Determination of aluminium - Subsection 3.1.6 Permanent magnet alloys: volumetric method... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.10 Determination of chromium - Subsection 3.10.2 Steel and cast iron: flame... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.10 Determination of chromium - Subsection 3.10.5 Ferrochromium: volumetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.11 Determination of cobalt - Subsection 3.11.1 Steel and cast iron: spectrophotometric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.11 Determination of cobalt - Subsection 3.11.2 Steel, irons and steelmaking materials:... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.12 Determination of copper - Subsection 3.12.4 Cast iron: volumetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.12 Determination of copper - Subsection 3.12.5 Permanent magnet alloys: volumetric method... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals - Part 3: Methods of Analysis - Section 3.12: Determination of Copper - Subsection 3.12.1: Steel and Cast Iron: Volumetric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.16 Determination of lead - Subsection 3.16.1 Carbon steels and low alloy... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.16 Determination of lead - Subsection 3.16.2 Steel: spectrophotometric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.16 Determination of lead - Subsection 3.16.3 Steel: spectrophotometric method for trace... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.17 Determination of magnesium - Subsection 3.17.1 Cast iron: volumetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.18 Determination of manganese - Subsection 3.18.4 Steel and cast iron: volumetric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.19 Determination of molybdenum - Subsection 3.19.2 Ferromolybdenum: gravimetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.19: Determination of molybdenum - Subsection 3.19.3: Molybdenum oxide and high grade... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.22 Determination of nitrogen - Subsection 3.22.1 Steel: volumetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.24 Determination of phosphorus - Subsection 3.24.2 Ferrochromium, ferromanganese and ferromolybdenum: spectrophotometric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.26 Determination of silicon - Subsection 3.26.2 Acid-resisting high silicon iron: gravimetric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.29 Determination of tantalum - Subsection 3.29.1 Steel: spectrophotometric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.31 Determination of tin - Subsection 3.31.1 Steel and cast iron: volumetric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.31 Determination of tin - Subsection 3.31.2 Ferrotungsten and tungsten metal: volumetric... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.33 Determination of tungsten - Subsection 3.33.1 Steel: gravimetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.33 Determination of tungsten - Subsection 3.33.2 Steel: spectrophotometric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.37 Determination of zirconium - Subsection 3.37.1 Steel: gravimetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.5 Determination of boron - Subsection 3.5.2 Ferroboron: volumetric method | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.8 Determination of carbon - Subsection 3.8.2 Steel and cast iron: non-aqueous... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.8 Determination of carbon - Subsection 3.8.5 Cast iron and pig iron:... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 4: Recommendations for the order of listing elements in the chemical analysis of steel | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 6: Guidelines on atomic absorption spectrometric techniques - Section 6.1 Recommendations for the drafting of standard methods for... | |
| Sampling and analysis of iron, steel and other ferrous metals - Part 6: Guidelines on atomic absorption spectrometric techniques - Section 6.2 Recommendations for the application of flame atomic absorption... | |
| Sampling and analysis of iron, steel and other ferrous metals \x97 Part 1: Introduction and contents | |
| Sampling and analysis of iron, steel and other ferrous metals Part 3. Methods of analysis Section 3.34 Determination of vanadium Subsection 3.34.1 Steel and cast iron: potentiometric titration method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Method of Analysis Section 3.26: Determination of Silicon Subsection 3.26.4: Steel and Cast Iron: Spectrophotometric Method for Si... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Sec. 3.28: Determination of Sulphur Subsec. 3.28.2: Steel and Cast Iron: Infra-Red Absorption Method After... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.10: Determination of Chromium Subsection 3.10.4: Ferrochromium and Ferrosilicochromium: Potentiometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.11: Determination of Cobalt Subsection 3.11.3: Flame Atomic Absorption Spectrometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.12: Determination of Copper Subsection 3.12.2: Steel and Cast Iron: Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.12: Determination of Copper Subsection 3.12.3: Steel and Cast Iron: Flame Atomic Absorption Spectrometric... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.16: Determination of Lead Subsection 3.16.4: Steel: Flame Atomic Absorption Spectrometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.18: Determination of Manganese Subsection 3.18.2: Steel Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.18: Determination of Manganese Subsection 3.18.3: Ferromanganese and Ferrosilicomanganese : Potentiometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.19: Determination of Molybdenum Subsection 3.19.1: Steel and Cast Iron: Photometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.1: Determination of Aluminium Subsection 3.1.5: Ferro-Silicon: Atomic Absorption Spectrometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.20: Determination of Nickel Subsection 3.20.1: Steel and Cast Iron Gravimetric or Titrimetric Method... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.20: Determination of Nickel Subsection 3.20.3: Steel and Cast Iron: Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.21: Determination of Niobium Subsection 3.21.1: Steel: Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.22: Determination of Nitrogen Subsection 3.22.2: Steel Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.22: Determination of Nitrogen Subsection 3.22.3: Steel Spectrophotometric Method (for Trace Amounts) | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.22: Determination of Nitrogen Subsection 3.22.4: Thermal Conductimetric Method After Fusion in a Current... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.24: Determination of Phosphorus Subsection 3.24.1: Steel and Cast Iron: Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.26: Determination of Silicon Subsection 3.26.3: Determination of Silicon | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.28 Determination of Sulfur Subsection 3.28.3: Steel and Iron: Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.28: Determination of Sulphur Subsection 3.28.1: Steel and Cast Iron: Gravimetric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.32: Determination of Titanium Subsection 3.32.1: Steel Spectrophotometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.32: Determination of Titanium Subsection 3.32.4: Ferrotitanium: Volumetric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.33: Determination of Tungsten Subsection 3.33.3: Ferrotungsten: Gravimetric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.34: Determination of Vanadium Subsection 3. 34.3: Steel and Cast . Iron: Flame Atomic... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.34: Determination of Vanadium Subsection 3.34.2: Steel and Cast Iron: Spectro- photometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.34: Determination of Vanadium Subsection 3.34.4: Ferrovanadium: Potentiometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.40: Multi-Element Methods Subsection 3.40.1: Determination of Nickel, Copper and Cobalt Contents by Inductively... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.40: Multi-Element Methods Subsection 3.40.3: Determination of Nickel, Copper and Cobalt Contents by Inductively... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.40: Multi-Element Methods Subsection 3.40.4: Determination of Nickel, Copper and Cobalt Contents by Inductively... | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.5: Determination of Boron Subsection 3.5.3: Curcumin Spectrophotometric Method After Distillation | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.7: Determination of Calcium Subsection 3.7.1: Steel: Flame Atomic Absorption Spectrometric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.8: Determination of Carbon Subsection 3.8.3: Steel and Cast Iron: Infra-Red Absorption Method After... | |
| Sampling and analysis of iron, steel and other ferrous metals Part 5. Guidelines on statistical procedures | |
| Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Carbon steel: atomic absorption spectrometric method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals: Part 3: Methods of Analysis Section 3.26 Determination of Silicon Subsection 3.26.1: Steel and Iron: Gravimetric Method | |
| Sampling and Analysis of Iron, Steel and Other Ferrous Metals: Part 3: Methods of Analysis: Section 3.26: Determination of Silicon: Subsection 3.26.5: Ferrosilicon, Ferrosilicomanganese and Ferrosilicochromium: Gravimetric Method | |
| Sampling Tobacco and Tobacco Products Part 1: Method of Sampling Batches of Raw Material (General Principles) | |
| Sampling Tobacco and Tobacco Products Part 2: Method of Preparing Samples for Collaborative Studies | |
| Sampling Tobacco and Tobacco Products Part 3: Methods of Sampling Cigarettes | |
| Sealed Nickel-Cadmium Prismatic Rechargeable Single Cells | |
| Selection of construction sealants - Guide | |
| Selection of Constructional Sealants | |
| Single Use Unlabelled Medical Specimen Containers for Haematology and Biochemistry | |
| Small, single-use, fire extinguishers - Specification | |
| Specification for 1 Pint (568 ml) Multi-Trip Glass Bottles for Pasteurized Milk | |
| Specification for Battery-Operated Electric Fence Controllers Not Suitable for Connection to the Supply Mains | |
| Specification for colours for signal glasses for railway purposes | |
| Specification for Components and filter units for electromagnetic interference suppression | |
| Specification for Computer Programming Language Pascal | |
| Specification for creped sterilization paper for medical use | |
| Specification for Crude Coconut Oil | |
| Specification for Crude Groundnut Oil (Arachis Oil) | |
| Specification for Differential Pressure Transmitters with Electrical Outputs | |
| Specification for dimensions and identification code for mounting flanges and shaft ends for hydraulic fluid power pumps and motors | |
| Specification for dimensions for the mounting of single-hole, bush-mounted, spindle operated electronic components | |
| Specification for Dimensions of Hook-Type Couplings on Agricultural Towing Vehicles | |
| Specification for dimensions of radiographic intensifying screens for medical use | |
| Specification for Electroplated Coatings of Tin/Lead Alloys | |
| Specification for Expansion vessels using an internal diaphragm, for unvented hot water supply systems | |
| Specification for Flax canvas water buckets | |
| Specification for friction welding of butt joints in metals for high duty applications | |
| Specification for Glass bottles for light wine | |
| Specification for high-pressure sodium vapour lamps | |
| Specification for hollow steel bars for machining | |
| Specification for Hose and Hose Assemblies for Asphalt and Bitumen | |
| Specification for industrial sewing threads made wholly or partly from synthetic fibres | |
| Specification for Installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases) | |
| Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating of rated input exceeding 60 kW (2nd family gases) | |
| Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases) | |
| Specification for Insulated Cables and Flexible Cords for Use in High Temperature Zones | |
| Specification for Insulated Flexible Cables and Cords for Coil Leads | |
| Specification for Junction boxes for use in electrical installations with rated voltages not exceeding 250 V | |
| Specification for Kohlrausch Flasks | |
| Specification for Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Definitions, Classification and Designation | |
| Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 terminals | |
| Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 2 terminals | |
| Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 terminals | |
| Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 terminals | |
| Specification for Low Voltage Switchgear and Controlgear for Industrial Use. Mounting Rails. Top Hat Rails, 15 mm Wide for the Fixing of Terminal Blocks | |
| Specification for Low-Frequency Miniature Equipment Wires with Solid or Stranded Conductor, Fluorinated Polyhydrocarbon Type Insulation, Single | |
| Specification for mechanical cable glands for elastomer and plastics insulated cables | |
| Specification for mineral-insulated cables. Aluminium-sheathed cables with copper conductors and aluminium-sheathed cables with aluminium conductors | |
| Specification for mineral-insulated cables. Copper-sheathed cables with copper conductors | |
| Specification for mineral-insulated copper-sheathed cables with copper conductors | |
| Specification for Miniature hacksaw blades | |
| Specification for Nessler Cylinders | |
| Specification for non-metallic gears | |
| Specification for open-mouth sacks manufactured from woven polyolefin tape yarn | |
| Specification for oropharyngeal airways Abstract Specifies size designation and basic requirements for materials and design. | |
| Specification for paper bags for steam sterilization for medical use | |
| Specification for paper for steam sterilization paper bags for medical use | |
| Specification for plain sterilization paper for medical use | |
| Specification for polythene insulation and sheath of electric cables | |
| Specification for Potassium and sodium cyanides for electroplating | |
| Specification for Presentation of Technical Data on Hydraulic Systems of Agricultural Tractors and Machinery | |
| Specification for Pressure and vacuum switches | |
| Specification for PVC - Insulated Cables for Switchgear and Controlgear Wiring | |
| Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts | |
| Specification for Safety of Data Processing Equipment | |
| Specification for Size designation of men's wear | |
| Specification for Small disposable fire extinguishers of the aerosol type | |
| Specification for Solvent cement for non-pressure thermoplastics pipe systems | |
| Specification for sterile epidural catheters and their introducer needles for single use | |
| Specification for Straight cylindrical involute splines: metric module, side fit - Part 1: Dimensions and tolerances - Addendum1: Inspection | |
| Specification for test sieves for cereals | |
| Specification for tracheal tubes for large animals in veterinary anaesthesia | |
| Specification for Tungsten filament lamps for general service (with lives of 2000 h) | |
| Specification for Zones of Comfort and Reach for Controls in Earth-Moving Machinery | |
| Stationary Air Compressors | |
| Steel and iron - Determination of tin content - Flame atomic absorption spectrometric method (extraction as Sn-SCN) | |
| Storage of Cereals and Pulses Part 1: Guide to Particular Problems Encountered in the Storage of Cereals and Pulses | |
| Storage of Cereals and Pulses Part 2: Code of Practice for the Storage of Cereals and Pulses | |
| Storage of cereals and pulses. Guide to control of attack by vertebrate and invertebrate animals | |
| Tail Lifts, Mobile Lifts and Ramps Associated with Vehicles Part 1: Code of Practice for Tail Lifts | |
| Tail Lifts, Mobile Lifts and Ramps Associated with Vehicles Part 2: Code of Practice for Passenger Lifts and Ramps | |
| Tail Lifts | |
| Temperature Transmitters with Electrical Outputs | |
| Terms Used in the Numerical Control of Machines | |
| Test Equipment for Generating Vibration Part 1: Methods of Describing Characteristics of Electro Dynamic Test Equipment for Generating Vibration | |
| Test Equipment for Generating Vibration Part 2: Methods of Describing Characteristics of Auxiliary Tables for Test Equipment for Generating Vibration | |
| Thermal Insulation of Cavity Walls by Filling with Blown Man-Made Mineral Fibre Part 1: Specification for the Performance of Installation Systems | |
| Thermal Insulation of Cavity Walls by Filling with Blown Man-Made Mineral Fibre Part 2: Code of Practice for Installation of Blown Man-Made Mineral Fibre in Cavity Walls with Masonry and/or... | |
| Tracheostomy Tubes Part 2: Tubes (Excluding Connectors) | |
| Tracheostomy tubes. Specification for connectors | |
| Tracked Changes (Redline) - Code of practice for the design, planning, installation, testing and maintenance of sound systems | |
| Tracked Changes (Redline) - Domestic kitchen equipment Part 3: Performance requirements for durability of surface finish and adhesion of surfacing and edging materials \x96 Specification | |
| Tracked Changes (Redline) - Flat roofs with continuously supported flexible waterproof coverings \x96 Code of practice | |
| Tracked Changes (Redline) - Glazing for buildings \x96 Part 1: General methodology for the selection of glazing | |
| Tracked Changes (Redline) - Glazing for buildings \x96 Part 7: Code of practice for the provision of information | |
| Tracked Changes (Redline) - Health and safety in tunnelling in the construction industry \x96 Code of practice | |
| Tracked Changes (Redline) - Installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases) \x97 Specification | |
| Tracked Changes (Redline) - Specification for small disposable fire extinguishers of the aerosol type | |
| Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials | |
| Volumetric Measurement of Liquid Hydrocarbons Part 1: Displacement Meter Systems (Other Than Dispensing Pumps) | |
| Volumetric Measurement of Liquid Hydrocarbons Part 2: Turbine Meter Systems | |
| Work Platforms Part 1: Code of Practice for Mobile Scissor Operated Work Platforms |
| << Prev | Next >> |