Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
300
301
302
303
304
305
306
307
308
309
310
311
312
320
330
340
350
360
370
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 10 Mbps Slotted Ring Local Area Network Part 1: Specification for the Coding of Bits and Structure of Slots and Mini-Packets | |
| 10 Mbps Slotted Ring Local Area Network Part 2: Specification for Configuration | |
| 10 Mbps Slotted Ring Local Area Network Part 3: Specification for Free-Standing Repeaters | |
| 10 Mbps Slotted Ring Local Area Network Part 4: Specification for Basic and Enhanced Class Nodes with Type 1 Node/DTE Interface | |
| 10 Mbps Slotted Ring Local Area Network Part 5: Specification for Monitor | |
| 10 Mbps Slotted Ring Local Area Network Part 6: Specification for Logging Station | |
| 10 Mbps Slotted Ring Local Area Network Part 7: Specification for Slave Power Supplies | |
| Agricultural Tractors and Machines - Engine Test Code - Net Power | |
| Agricultural Trailer and Trailed Machinery Drawbar Jacks | |
| Air Filters Used in Air Conditioning and General Ventilation Part 1: Methods of Test for Atmospheric Dust Spot Efficiency and Synthetic Dust Weight Arrestance | |
| Air Permeance of Paper and Board Part 1: Method for Determination of Air Permeance: General Aspects of Testing | |
| Air Permeance of Paper and Board Part 2: Method for Determination of Air Permeance Using the Bendtsen Apparatus | |
| Air Permeance of Paper and Board Part 3: Method for Determination of Our Permeance Using the Gurley Apparatus | |
| Aluminium conductors in insulated cables | |
| Apparatus with one or more particular functions for connection to certain public switched telephone networks - Part 3: Apparatus with auto-calling, auto-answering and auto-clearing facilities - Section 3.2 Specification for... | |
| Apparatus with one or more particular functions for connection to certain public switched telephone networks - Part 6: Specification for series connected apparatus - Section 6.1 Apparatus having maximum allowable... | |
| Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators - Part 6: Specification for series connected apparatus - Section... | |
| Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators - Part 7: Specification for apparatus with call barring facilities... | |
| Apparatus with One or More Particular Functions for Connection to the British Telecommunications Public Switched Telephone Network - Part 1: Specification for general requirements | |
| Apparatus with One or More Particular Functions for Connection to the British Telecommunications Public Switched Telephone Network Part 2: Specification for Apparatus with Loudspeaking Facilities | |
| Apparatus with One or More Particular Functions for Connection to the British Telecommunications Public Switched Telephone Network: Part 3: Apparatus with Auto-Calling, Auto-Answering and Auto-Clearing Facilities - Section 3.1: Specification... | |
| Binders for Paint Part 3. Method for Determination of Acid Valve (Titrimetric Method) | |
| Binders for Paints - Part 10: Determination of Monomeric Diisocyanates in Polyisocyanate Resins | |
| Binders for Paints - Part 11: Determination of the Viscosity of industrial Cellulose Nitrate Solutions and Their Classification | |
| Binders for Paints - Part 13: General Methods of Test for Chlorinated Polymerization Resins | |
| Binders for Paints - Part 14: Gel Permeation Chromatography (GPC) with Tetrahydrofuran (THF) as Eluent | |
| Binders for Paints - Part 17: Determination of MEQ Value of Water-Dilutable Binders | |
| Binders for Paints - Part 18: General Methods of Test for Water-Dilutable Binders | |
| Binders for Paints - Part 6: Method for Determination of Softening Point (Ring and Ball Method) | |
| Binders for Paints - Part 8: General Methods of Test for Amino Resins | |
| Binders for Paints - Part 9: General Methods of Test for Polyisocyanate Resins | |
| Binders for paints \x97 Part 1: Method for determination of volatile and non-volatile content | |
| Binders for Paints and Varnishes - Part 16: Methods of Test for Alkyd Resins - Section 16.2: Determination of Phthalic Anhydride Content | |
| Binders for Paints and Varnishes - Part 16: Methods of Test for Alkyd Resins - Section 16.3: Determination of Unsaponifiable Matter Content | |
| Binders for Paints and Varnishes - Part 16: Methods of Test for Alkyd Resins - Section 16.4: Determination of Fatty Acid Content | |
| Binders for paints Part 12: Estimation of colour of clear liquids by the platinum-cobalt scale | |
| Binders for Paints Part 15: Specifications and Test Methods for Tall-Oil Fatty Acids | |
| Binders for Paints Part 2: Method for Determination of Saponification Valve (Titrimetric Method) | |
| Binders for Paints Part 4. Method for Determination of Hydroxyl Value (Titrimetric Method) | |
| Binders for Paints Part 5. Method for Estimation of Colour of Clear Liquids by the Gardner Colour Scale | |
| Binders for Paints Part 7: Method for Determination of Free-Formaldehyde Content of Amino Resins (Sodium Sulfite Titrimetric Method) | |
| Bourdon Tube Pressure Gauges Used in Welding, Cutting and Related Processes | |
| Caravans Part 3: 12 V Direct Current Extra Low Voltage Electrical Installations | |
| Carbon Disulphide for Industrial - Use Part 1: Specification | |
| Carbon disulphide for industrial use - Part 3: Additional methods of test | |
| Carbon Disulphide for Industrial Use Part 2: Sampling and Methods of Test | |
| City resilience - Guide | |
| Clay and Calcium Silicate Modular Bricks | |
| Clay and Calcium Silicate Pavers for Flexible Pavements - Part 2: Code of Practice for Design of Lightly Trafficked Pavements | |
| Clay and Calcium Silicate Pavers for Flexible Pavements Part 1: Specification for Pavers | |
| Clay and Calcium Silicate Pavers for Flexible Pavements Part 3: Method for Construction of Pavements | |
| Clearance Zone on Implements for the Three-Point Linkage to Agricultural Tractors | |
| Code of practice for control of the operation of a computer | |
| Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses | |
| Code of Practice for Hand Signalling for Use in Agricultural Operations | |
| Code of practice for installation of apparatus intended for connection to certain telecommunication systems. General recommendations | |
| Code of Practice for Installation of Apparatus Intended for Connection to Certain Telecommunication Systems | |
| Code of practice for installation of private branch exchanges for connection to the British Telecommunications public switched telephone network | |
| Code of Practice for Maintenance of Electrical Switchgear and Controlgear for Voltages Above 650V and up to and Including 36kV | |
| Code of Practice for on- Site Non-Mechanical Jointing of Plied Textile and Steel Reinforced Conveyor Belting | |
| Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting | |
| Code of Practice for Protection of Structures Against Lightning | |
| Code of Practice for Safe Operation of Starter Batteries | |
| Code of practice for Solar heating systems for swimming pools | |
| Code of Practice for the Selection, Care and Maintenance of Steel Wire Ropes | |
| Coded Character Sets for Text Communication Part 1: General Introduction | |
| Coded character sets for text communication. Specification for Latin alphabetic and non-alphabetic graphic characters | |
| Colour Chart for Insulation and Sheath of Electric Cables | |
| Common Requirements for High-Voltage Switchgear and Controlgear Standards | |
| Cross Recesses for Screws | |
| Data Terminal Equipment for Attachment to 10 Mbps Slotted Ring Local Area Network Part 1: Specification for Media Access Control Procedures for Data Terminal Equipment | |
| Data Terminal Equipment for Attachment to 10 Mbps Slotted Ring Local Area Network Part 2: Specification for Implementation Requirements for Media Access Control in General Purpose Data Terminal Equipment | |
| Description of basic reference model for open systems interconnection | |
| Design, Construction and Maintenance of Single- Skin Air Supported Structures | |
| Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages - Specification | |
| Design, Installation, Testing and Maintenance of Services Supplying Water for Domestic Use within Buildings and Their Curtilages | |
| Designation of Perforations in Industrial Plate Screens | |
| Detemination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.5: Room Heaters of the Storage Type | |
| Determination of Colour Stability of Dental Polymeric Materials | |
| Determination of Combine Harvester Capacity and Unloading Rate | |
| Determination of Decarburization in Steel Part 1: Methods for Determining Decarburization by Microscopic and Micro- Hardness Techniques | |
| Determination of Decarburization in Steel Part 2: Methods for Determining Decarburization by Chemical and Spectrographic Analysis Techniques | |
| Determination of Ferrite Number in Austenitic Weld Metal Deposited by Covered Cr-Ni Steel Electrodes | |
| Determination of Reducibility of Iron Ores | |
| Determination of the Dynamic Fracture Toughness of Metallic Materials | |
| Determining Departures from Roundness by Measuring Variations in Radius | |
| Diffusable Hydrogen Part 1: Method for Determination of Hydrogen in Manual Metal-Arc Weld Metal Using 3 Day Collection | |
| Diffusable Hydrogen Part 2: Method for Determination of Hydrogen in Manual Metal-Arc Weld Metal | |
| Diffusable Hydrogen Part 3: Primary Method for the Determination of Diffusible Hydrogen in Manual Metal-Arc Ferritic Steel Weld Metal | |
| Diffusable Hydrogen Part 4: Primary Method for the Determination of Diffusible Hydrogen in Submerged-Arc Steel Weld-Metal | |
| Diffusable Hydrogen Part 5: Primary Method for the Determination of Diffusible Hydrogen in MIG, MAG, TIG or Cored Electrode Ferritic Steel Weld Metal | |
| Dimensional, Electrical and Luminous Requirements for Lamps for Road Vehicles | |
| Dimensions of Square Cores (RM-Cores) Made of Magnetic Oxides and Associated Parts | |
| Disposable Glass Serological Pipettes | |
| Disposable Micropipettes | |
| Domestic Oven Gloves | |
| Drive Sprocket Assemblies for Chain Conveyors for Mining | |
| DTE/DCE Interface Connectors and Pin Assignments Part 2: Specification for 37-Pin Connector | |
| DTE/DCE Interface Connectors and Pin Assignments Part 3: 15-Pin Connector | |
| DTE/DCE Interface Connectors and Pin Assignments Part 4: 34-Pin Connector | |
| Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V, having low emission of smoke and corrosive gases when affected by fire... | |
| Electrohydraulic Proportional Control Valves | |
| Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 1: General Introduction | |
| Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Method of Evaluating Susceptibility to Electrostatic Discharge | |
| Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 3: Method of Evaluating Susceptibility to Radiated Electromagnetic Energy | |
| Electrostatic painting and finishing equipment using flammable materials - Part 2: Specification for selection, installation and use of hand-held paint spray guns (energy limit of 0,24 mJ) and associated apparatus... | |
| Electrostatic painting and finishing equipment using flammable materials - Part 3: Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and their associated... | |
| Electrostatic painting and finishing equipment using flammable materials - Part 4: Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or 5 mJ)... | |
| Electrostatic Painting and Finishing Equipment Using Flammable Materials Part 1: Hand-Held Spray Guns and Associated Apparatus | |
| Ends of Fasteners with External Metric ISO Thread | |
| Explosion protection systems - Part 2: Method for determination of explosion indices of combustible gases in air | |
| Explosion Protection Systems Part 1: Method for Determination of Explosion Indices of Combustible Dusts in Air | |
| Explosion Protection Systems Part 3: Method for Determination of Explosion Indices of Fuel/Air Mixtures Other Than Dust/Air and Gas/Air Mixtures | |
| Explosion Protection Systems Part 4: Method for Determination of Efficacy of Explosion Suppression Systems | |
| File Structure and Labelling of Flexible Disk Cartridges for Information Interchange Part 1: Sequential File Allocation Structure Throughout the Standard | |
| File Structure and Labelling of Flexible Disk Cartridges for Information Interchange Part 2: Specification for Variable File Allocation Structure | |
| Fire Blankets | |
| Fire Extinguishing Media Part 2: Halons Section 2.1: Halon 1211 and Halon 1301 | |
| Fire Extinguishing Media Part 2: Halons Section 2.2: Code of Practice for Safe Handling and Transfer Procedures | |
| Fire Extinguishing Media Part 2: Specification for Halogenated Hydrocarbons | |
| Fire Extinguishing Media Part 3: Specification for Powder | |
| Fire extinguishing media. Specification for carbon dioxide | |
| Flammability Performance of Safety Film for Still Photography | |
| Flanges for Waveguides Part 2: Flanges for Ordinary Rectangular Waveguides | |
| Flashpoint of Petroleum and Related Products Part 4: Method for Determination of Flashpoint (Rapid Equilibrium Method) | |
| Flexible hoses, end fittings and sockets for gas burning appliances. Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st and 2nd family gases... | |
| Flexible hoses, end fittings and sockets for gas burning appliances. Specification for strip-wound flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases | |
| Flexible Metallic Hose Assemblies Part 1: Specification for Corrugated Hose Assemblies | |
| Flexible Metallic Hose Assemblies Part 2: Specification for Strip Wound Hoses and Hose Assemblies | |
| Fume from Welding and Allied Processes - Part 1: Guide to Methods for the Sampling and Analysis of Particulate Matter | |
| Fume from Welding and Allied Processes Part 2: Guide to Methods for the Sampling and Analysis of Gases | |
| General Introductory Document on European (or CEN) Methods of Test for Wood Preservatives | |
| Glossary for Leisure Accommodation Vehicles | |
| Glossary of acoustical terms | |
| Glossary of Terminology for Pallets for Materials Handling | |
| Glossary of Terms for Classification of Weaving Machines | |
| Glossary of Terms for Rolling Bearings | |
| Graduated compression hosiery, anti-embolism hosiery and graduated support hosiery \x97 Specification | |
| Graduated Compression Hosiery | |
| Ground Granulated Blastfurnace Slag for Use with Portland Cement | |
| Guidance on organizational resilience | |
| Guide for Comparative Testing of Performance of Detergents for Domestic Machine Dishwashing | |
| Guide for Comparative Testing of Performance of Detergents for Hand Dishwashing | |
| Guide for Exterior Colours for Park Homes (Mobile Homes), Holiday Caravans and Transportable Accommodation Units | |
| Guide for Overall Evaluation of Vibration in Merchant Ships | |
| Guide for Protection of Machine Tools Intended for Use in Extreme Environmental Conditions | |
| Guide for Selection of fuse links of high-voltage fuses for transformer circuit applications | |
| Guide to arrangements for DTE to DTE physical connection Part 1. General arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits | |
| Guide to Arrangements for DTE to DTE Physical Connection Part 2. DTE to DTE Physical Connection Using X.24 Interchange Circuits with DTE Providing Timing | |
| Guide to DTE/DCE Interface Control Operation Using the 25 Pole Connector | |
| Guide to Establishment and Development of Multilingual Thesauri | |
| Guide to Evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) | |
| Guide to Installation and use of valves | |
| Guide to Methods of Measurement of Short Duration Transients on Low Voltage Power and Signal Lines | |
| Guide to Microscopic Examination of Steel by Etching with Strong Mineral Acids | |
| Guide to Oscilloscopes and Peak Voltmeters for Impulse Tests | |
| Guide to Prevention of Inadvertent Ignition of Flammable Atmospheres by Radio-Frequency Radiation | |
| Guide to Prevention of Inadvertent Initiation of Electro-Explosive Devices by Radio-Frequency Radiation | |
| Guide to properties and types of rubber | |
| Guide to setting up and maintaining micrographics and digital imaging units - Part 1: Micrographics | |
| Guide to Setting up and Maintaining Micrographics Units | |
| Guide to Specifying User Requirements for a Computer-Based System | |
| Guide to the specification of limits for physical imperfections of parts made from magnetic oxides | |
| Guide to Transmission signal quality at DTE/DCE interfaces - Part 2: Synchronous transmission | |
| Guide to Use of Industrial by-Products and Waste Materials in Building and Civil Engineering | |
| Habitation and Stability Requirements for Leisure Accommodation Vehicles: Leisure Homes | |
| Handheld Blowpipes and Nozzles, Using Fuel Gas and Oxygen, for Gas Welding, Cutting and Related Processes | |
| Highway Parapets for Bridges and Other Structures Part 1: Specification for Vehicle Containment Parapets of Metal Construction | |
| Highway Parapets for Bridges and Other Structures Part 3: Specification for Vehicle Containment Parapets of Combined Metal and Concrete Construction | |
| Highway Parapets for Bridges and Other Structures Part 4: Specification for Parapets of Reinforced and Unreinforced Masonry Construction | |
| Hot-Dip Aluminium/Silicon Coated Cold Reduced Carbon Steel Sheet and Strip | |
| Hydraulic fluid power valve mounting surfaces - Part 2: Four-Port and Five-Port Servo-Valves | |
| Hydraulic Fluid Power Valve Mounting Surfaces Part 1: Four-Port Directional Control Valves | |
| Hydraulic Fluid Power Valve Mounting Surfaces Part 3: Pressure-Relief Valves | |
| Hydraulic Fluid Power Valve Mounting Surfaces Part 4: Clamping Dimensions of Four-Port Sizes 03 and 05, Modular Stack Valves and Directional Control Valves | |
| Hydraulic Fluid Power Valve Mounting Surfaces Part 5: Compensated Low-Control Valves | |
| Hydraulic Fluid Power Valve Mounting Surfaces Part 6: Pressure-Control Valves (Excluding Pressure-Relief Valves), Sequence Valves, Unloading Valves, Throttle Valves and Check Valves | |
| Implementation of V24 or RS232 as an Asynchronous Local Interface | |
| Industrial plate screens - Part 1: Guide for screens of thickness 3 mm and above | |
| Industrial plate screens - Part 2: Guide for screens of thickness below 3 mm | |
| Installation of Apparatus Intended for Connection to Certain Telecommunication Systems Part 2: Installation of Switching Apparatus That May Be Connected to Certain Analogue Telecommunications Systems | |
| Installation of Chemical Damp-Proof Courses | |
| Instrumentation in Process Control Systems: Installation Design and Practice | |
| Insulated Domestic Food Containers Part 1: Vacuum Ware and Insulated Flasks, Jars and Jugs | |
| Insulated Domestic Food Containers Part 2: Insulated Bags and Boxes | |
| Intruder Alarm Systems for Consumer Installation | |
| Kettles | |
| Laminated synthetic resin bonded sheet (fabric base) for use as gear material | |
| Laminations for Transformers and Inductors for Use in Telecommunications and Electronic Equipment Part 1: Characteristics and Electrical Testing | |
| Laryngoscopic Fittings Part 1: Specification for Hook-on Type Handle-Blade Fittings | |
| Laryngoscopic fittings. Part 2: Specification for screw threads for miniature electric lamps and sockets | |
| Leisure accommodation vehicles: caravans \x97 Part 4: Specification for undergear | |
| Limits and Repair of Surface Discontinuities of Hot-Rolled Steel Plates and Wide Flats | |
| Limits of Metal Release from Ceramic Ware, Glassware, Glass Ceramic Ware and Vitreous Enamel Ware | |
| Low Speed Digital Signals for Use in Coal Mines - Part 1: Specification for Optical Coupling | |
| Low Speed Digital Signals for Use in Coal Mines - Part 3: Specification for Message Protocols | |
| Low Speed Digital Signals for Use in Coal Mines Part 2: Transformer Coupling | |
| Low Voltage Switchgear and Controlgear for Industrial Use. Control Switches. Position Switches 30 x 55; Dimensions and Characteristics | |
| Low Voltage Switchgear and Controlgear for Industrial Use. Control Switches. Position Switches 43.5 X 80; Dimensions and Characteristics | |
| Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Identification of Connections | |
| Low-Voltage Switchgear and Controlgear for Industrial Use. Requirements Applicable to Terminals Concerning Cross-Sections of Connectable Conductors | |
| Mail Payment Orders | |
| Maintainability of Equipment - Part 1: Guide to Specifying and Contracting for Maintainability | |
| Maintainability of Equipment Part 2: Guide to Maintainability Studies During the Design Phase | |
| Maintainability of Equipment Part 3: Guide to Maintainability Verification, and the Collection, Analysis and Presentation of Maintainability Data | |
| Maintainability of Equipment Part 4: Guide to the Planning of Maintenance and Maintenance Support | |
| Maintainability of Equipment Part 5: Guide to Diagnostic Testing | |
| Maintainability of Equipment Part 6: Guide to Statistical Methods in Maintainability Evaluation | |
| Malleable Cast Iron | |
| Mastic Asphalt for Building (Natural Rock Asphalt Aggregate) | |
| Measurement and Reporting of Local Vibration Data of Ship Structures and Equipment | |
| Measurement and Reporting of Shipboard Vibration Data | |
| Measurement of Hygroexpansivity of Paper and Board Part 1: Method for Measurement of Hygroexpansivity up to a Maximum Relative Humidity 68% | |
| Measurement of Hygroexpansivity of Paper and Board Part 2: Method for Measurement of Hygroexpansivity up to a Maximum Relative Humidity of 86 Percent | |
| Measurements and Evaluation of Vibration Rotating Shafts Part 1: Guide to General Principles | |
| Medical Radiology Terms | |
| Message Types for Securities Part 1: Messages for Receipt/Delivery | |
| Message Types for Securities Part 2: Specification for Messages for Orders to Buy/Sell | |
| Metal Screw Necks, Screw Caps and Inner Seals for Metal Containers | |
| Method for Determination of alkali solubility of flax materials | |
| Method for Determination of ash of textiles | |
| Method for Determination of Castor Oil Glycerides Content of Raw, Natural Rubber by Thin Layer Chromatography | |
| Method for Determination of Crushing Strength of Iron Ore Pellets | |
| Method for Determination of Density or Relative Density of Liquefied Petroleum Gases and Other Light Hydrocarbons by Pressure Hydrometer Method | |
| Method for Determination of Percentage Water Saturation of Insulating Oil | |
| Method for Determination of the Antimicrobial Efficacy of Disinfectants for Veterinary and Agricultural Use | |
| Method for Determination of the Electrical Resistivity of Textile Floor Coverings | |
| Method for Determination of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube for Medical Diagnosis | |
| Method for Determination of the Roughness of Paper and Board by the Parker Print-Surf Apparatus | |
| Method for Determination of the surface resistivity of a textile fabric | |
| Method for Determination of Water in Liquid Dielectrics by Automatic Coulometric Karl Fischer Titration | |
| Method for Expression of the Properties of Logic Analyzers | |
| Method for Identification of antidegradants in rubber and rubber products by thin layer chromatography | |
| Method for Quantitative determination of lead in tin coatings | |
| Method for Specifying Requirements for Low Voltage Power Supplies, Switching Type, d.c. Output | |
| Method for the determination of bimetallic corrosion in outdoor exposure corrosion tests | |
| Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 1: General Requirements for Testing | |
| Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.1: Vacuum Cleaners | |
| Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.2: Forced Draught Convection Heaters | |
| Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.3: Dishwashers | |
| Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.4: Washing Machines and Spin Extractors | |
| Methods for Determination of crimp rigidity of textured nylon yarns | |
| Methods for Determination of Water Absorption of Paper and Board (Klemm Method) | |
| Methods for Determining the Characteristics of Focal Spots in Diagnostic X-Ray Tube Assemblies for Medical Use | |
| Methods for Sampling Oilseed Residues | |
| Methods for Use and testing of capacity of volumetric glassware | |
| Methods for Volumetric Testing for Rating of Fan Sections in Central Station Air Handling Units (Including Guidance on Rating) | |
| Methods for Wet ashing of textile materials for subsequent determination of metal content | |
| Methods of Acceptance Inspection for Fasteners | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 1: Determination of Coating Thickness | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 2: Environmental Tests | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 3: Electrographic Tests for Porosity | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 4: Determination of Gold Content | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 5: Adhesion Tests | |
| Methods of Test for Electroplated Gold and Gold Alloy Coatings Part 6: Detection of Residual Salts | |
| Methods of test for Electroplated silver and silver alloy coatings - Part 1: Determination of coating thickness | |
| Methods of test for Electroplated silver and silver alloy coatings - Part 2: Adhesion tests | |
| Methods of test for Electroplated silver and silver alloy coatings - Part 3: Detection of residual salts | |
| Methods of Test for Radionuclide Imaging Devices | |
| Methods of Test for Thermal Performance of Solar Collectors | |
| Neurosurgical implants - Part 1: Specification for sterile, single-use hydrocephalus shunts and components | |
| Neurosurgical implants - Part 2: Specification for marking and packaging of implantable neural stimulators | |
| Neurosurgical implants - Part 3: Specification for self-closing intracranial aneurysm clips | |
| Nostro Accounts Reconciliation in Banking | |
| Optical Fibres and Cables Part 1: General Requirements | |
| Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Part 10: Specification for the outline Dimensions of Transformers and Inductors Using the Q Range of... | |
| Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Part 1: Specification for the Outline Dimensions of Transformers and Inductors Using YEI-1 Laminations | |
| Parapets for Vehicle Containment on Highways Part 2: Parapets of Concrete Construction | |
| Photographic Grade Potassium Sulphite, 650g/L Aqueous Solution | |
| Plywood - Part 5: Specification for moisture content | |
| Plywood \x97 Part 4: Specification for tolerances on the dimensions of plywood panels | |
| Plywood Part 1: Construction of Panels and Characteristics of Plies Including Marking | |
| Plywood Part 2: Glossary of Terms | |
| Plywood Part 3: Acceptance Levels for Post- Manufacture Batch Testing Including Sampling | |
| Plywood Part 6: Limits of Defects for the Classification of Plywood by Appearance | |
| Plywood Part 7: Classification of Resistance of Plywood to Fungal Decay and Wood Borer Attack | |
| Plywood Part 8: Bond Performance of Veneer Plywood | |
| Polyester Fibre Woven Tapes for Electrical Purposes) | |
| Polytetrafluoroethyl ene (PTFE) Materials and Products - Part 3: Specification for E Glass Fibre Filled Polytetrafluoroethyl ene | |
| Polytetrafluoroethyl ene (PTFE) Materials and Products Part 1: Polytetrafluoroethyl ene Powders for Moulding and Extrusion Section 1.1: Specification | |
| Polytetrafluoroethyl ene (PTFE) Materials and Products Part 1: Polytetrafluoroethyl ene Powders for Moulding and Extrusion Section 1.2: Method of Specifying | |
| Polytetrafluoroethyl ene (PTFE) Materials and Products Part 2: Fabricated Unfilled Polytetrafluoroethyl ene Products | |
| Portable Lead-Acid Cells and Batteries Part 1: Specification for Performance, Design and Construction of Valve Regulated Sealed Type | |
| Powder Organic Coatings for Application & Stov- ing to Aluminium Alloy Extrusions, Sheet & Pre-formed Sections for Ex- ternal Architectural Purposes, & for the Finish on Aluminium Alloy Extrusions, Sheet... | |
| Powder Organic Coatings for Application & Stoving to Hot-Dip Galvanized Hot-Rolled Steel Sections & Steel Sheet for Windows & Associated External Architectural Purposes, & for the Finish on Galvanized Steel... | |
| Precast Concrete Paving Blocks Part 1: Paving Blocks | |
| Precast concrete paving blocks Part 3. Code of practice for laying | |
| Precast, Unreinforced Concrete Paving Blocks - Requirements and Test Methods | |
| Preparation of microfilm and other microforms that may be required as evidence | |
| Presentation of Headers for Microfiche of Monographs and Serials | |
| Presentation of Spine Titles | |
| Producing and Assessing Changes in Surface Structure and Colour of Textile Floor Coverings Part 1: Method for Assessment of the Changes | |
| Producing and Assessing Changes in Surface Structure and Colour of Textile Floor Coverings Part 2: Method for Fatiguing Using the Hexapod Tumbler Tester | |
| Proper Use and Maintenance of Calibrated Round Steel Link Lifting Chains | |
| Protective Helmets for Vehicle Users | |
| Puretone Air Conduction Threshold Audiometry for Hearing Conservation Purposes | |
| Ratios of Proof and Burst Pressure to Design Working Pressure for Rubber and Plastic Hoses and Hose Assemblies | |
| Reach Volumes for the Location of Controls on Agricultural Tractors and Machinery | |
| Recharging Fire Extinguishers Part 1: Procedure and Materials | |
| Recharging Fire Extinguishers Part 2: Powder Refill Charges | |
| Recommendation for Working Widths of Equipment for Sowing, Planting, Distributing Fertilizers and Spraying | |
| Recommendations for Dimensions of metallic materials | |
| Recommendations for Examining documents, determining their subjects and selecting indexing terms | |
| Reference Beta Radiations for Calibrating Dosemeters and Doseratemeters and for Determining Their Response as a Function of Beta Radiation Energy | |
| Reference Model of Open Systems Interconnection Part 1: Basic Reference Model (Incorporating Connectionless-Mode Transmission) | |
| Representation of Numerical Values in Character Strings for Information Interchange | |
| Rigid Polyurethane (PUR) Foam Produced by the Press Injection Method Part 1: PUR Foam for Insulated Panels for Transport Containers and Insulated Vehicle Bodies | |
| Rubber and Plastics Hoses: Internal Diameters and Tolerances on Length | |
| Rubber Hoses and Hose Assemblies for Automobile Power Steering Systems | |
| Rubber Hoses and Hose Assemblies for Rotary Drilling and Vibration Applications | |
| Rubber-Type Materials Used for Controls Components for Use with 1st, 2nd and 3rd Family Gases | |
| Safety fences and barriers for highways - Part 3: Specification for components for tensioned rectangular hollow section beam (100 mm \xd7 100 mm) safety fence | |
| Safety fences and barriers for highways - Part 4: Specification for components for tensioned rectangular hollow section beam (200 mm\xd7 100 mm) safety fence | |
| Safety fences and barriers for highways - Part 5: Specification for open box beam safety fence (single height) | |
| Safety fences and barriers for highways - Part 6: Specification for components for open box beam safety fence (double height) | |
| Safety fences and barriers for highways - Part 7: Specification for components for untensioned corrugated beam safety fence | |
| Safety fences and barriers for highways - Part 8: Specification for concrete safety barriers | |
| Safety fences and barriers for highways. Specification for components for tensioned corrugated beam safety fence on Z posts | |
| Safety of Power-Driven Industrial Brushes | |
| Safety Valves Part 1. Specification for Safety Valves for Steam and Hot Water | |
| Safety Valves Part 2: Specification for Safety Valves for Compressed Air or Inert Gases | |
| Safety Valves Part 3: Specification for Safety Valves for Process Fluids | |
| Sampling and Analysis of Copper and Copper Alloys - Part 10: Method for Determination of Chromium in Copper Alloys: Titrimetric Method | |
| Sampling and Analysis of Copper and Copper Alloys - Part 11: Method for Determination of Sulphur in Copper and Copper Alloys: Combustion Titrimetric Method | |
| Sampling and Analysis of Copper and Copper Alloys Part 4: Method for Determination of Chromium in Copper and Copper Alloys by Flame Atomic Absorption Spectrophotometry | |
| Sampling and Analysis of Copper and Copper Alloys Part 5: Method for Determination of Zinc in Copper and Copper Alloys by Flame Atomic Absorption Spectrophotometry | |
| Sampling and Analysis of Copper and Copper Alloys Part 6: Method for Determination of Phosphorus in Copper and Copper Alloys by Spectrophotometry | |
| Sampling and Analysis of Copper and Copper Alloys Part 7: Method for Determination of Nickel in Copper Alloys: Gravimetric Method | |
| Sampling and Analysis of Copper and Copper Alloys Part 8: Method for Determination of Nickel in Copper Alloys: Titrimetric Method | |
| Sampling and Analysis of Copper and Copper Alloys Part 9: Method for Determination of Lead in Copper Alloys by Flame Atomic Absorption Spectrophotometry | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys - Part 12: Method for the Determination of Phosphorus in Nickel Alloys by Molybdenum Blue Molecular Absorption Spectrometry | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys - Part 13: Method for the determination of Phosphorus in Nickel, Ferronickel and Nickel Alloys by Phosphovanadomolybda te Molecular Absorption Spectrometry... | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys - Part 14: Method for the Determination of Total Boron Content of Nickel, and Nickel Alloys by Curcumin Molecular Absorption Spectrometry... | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 10: Method for Determination of Iron in Nickel Alloys (Titrimetric Method Using Potassium Dichromate) | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 11: Method for the Determination of Cobalt in Nickel Alloys (Potentiometric Titration Method Using Potassium Hexacyanoferrate) (III) | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 15: Method for the Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 1: Method for Determination of Silver, Bismuth, Cadmium, Cobalt, Copper, Iron, Manganese, Lead and Zinc in Nickel by Flame Atomic... | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 2: Method for Determination of Nickel in Ferronickel (Dimethylglyoxime Gravimetric Method) | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 3: Method for Determination of Cobalt in Ferronickel by Flame Atomic Absorption Spectrometry | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 5: Method for Determining of Carbon in Nickel Ferronickel and Nickel Alloys by Infra-Red Absorption After Induction Furnace Combustion | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 6: Method for Determining of Sulphur in Nickel by Methylene Blue Molecular Absorption Spectrometry After Generation of Hydrogen Sulphide | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 7: Method for Determining of Sulphur in Nickel, Ferronickel and Nickel Alloy by Infra-Red Absorption After Induction Furnace Combustion | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 8: Method for Determination of Sulphur in Nickel, Ferronickel and Nickel Alloys by Iodimetric After Induction Furnace Combustion | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys Part 9: Method for Determination of Silicon in Ferronickel (Gravimetric Method) | |
| Sampling and Analysis of Nickel, Ferronickel and Nickel Alloys: Part 4: Method for Determination of Silver, Arsenic, Bismuth, Cadmium, Lead, Antimony, Selenium, Tin, Tellurium and Thallium in Nickel by Electro-... | |
| Scraper Bars for Chain Conveyors for Mining | |
| Selection, Installation and Maintenance of Intrinsically Safe Electrical Equipment in Coal Mines | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.2: Recommendations for Rectifier Diodes | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.3: Recommendations for Signal (Including Switching) and Regulator Diodes | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.4: Recommendations for Microwave Diodes and Transistors | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.5: Recommendations for Optoelectronic Devices | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.6: Recommendations for Thyristors | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.7: Recommendations for Bipolar Transistors | |
| Semiconductor Devices Part 1: Discrete Devices Section 1.8: Recommendations for Field-Effect Transistors | |
| Semiconductor Devices Part 2: Integrated Circuits Section 2.1: General | |
| Semiconductor Devices Part 2: Integrated Circuits Section 2.2: Recommendations for Digital Integrated Circuits | |
| Semiconductor Devices Part 2: Integrated Circuits Section 2.3: Recommendations for Analogue Integrated Circuits | |
| Semiconductor Devices Part 2: Integrated Circuits Section 2.4: Recommendations for Interface Integrated Circuits | |
| Semiconductor Devices Part 3: Mechanical and Climatic Test Methods | |
| Services for Leisure Accommodation Vehicles and Transportable Accommodation Units - Part 2: Code of Practice for the Installation of Solid Fuel Fired Heating in Park Homes and Transportable Accommodation Units... | |
| Services for Leisure Accommodation Vehicles and Transportable Accommodation Units Part 3: Specification for Oil-Fired Heating Systems | |
| Solderless Connections Part 1: Solderless Wrapped Connections (Including Test Methods and Practical Guidance) | |
| Solderless Connections Part 2: Solderless Crimped Connections (Including Test Methods and Practical Guidance) | |
| Specification for a data descriptive file for information interchange | |
| Specification for apparatus for the determination of distillation range (including flasks and receivers) | |
| Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire | |
| Specification for austenitic stainless steel bars for the reinforcement of concrete | |
| Specification for Black polyethylene pipes up to nominal size 63 for above ground use for cold potable water | |
| Specification for Blue polyethylene pipes up to nominal size 63 for below ground use for potable water | |
| Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V | |
| Specification for Capacity ratings and dimensions of power presses, mechanical open front type | |
| Specification for cast copper alloy pipe fittings for use with screwed copper tubes | |
| Specification for Castor Oil (\xb4Firsts\xb4 Quality) | |
| Specification for Cattle hide leathers for upholstered furniture | |
| Specification for ceiling roses | |
| Specification for Chamois Leather | |
| Specification for check character systems for use in information interchange, and guidance on choice and methods of application | |
| Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products | |
| Specification for continuously organic coated steel flat products | |
| Specification for Corrosion Inhibiting, Engine Coolant Concentrate | |
| Specification for Crude Maize Oil | |
| Specification for Crude Palm Kernel Oil | |
| Specification for Crude Soya Bean Oil | |
| Specification for Design and construction of reservoirs used in hydraulic fluid power systems | |
| Specification for dimensional tolerances for metal and metal alloy castings | |
| Specification for Dimensions of chain wheel tooth forming tools | |
| Specification for Disposable Plastics Refuse Sacks Made from Polyethylene | |
| Specification for domestic and similar electronic equipment. Interconnection requirements: peritelevision connector | |
| Specification for Edison Screw Lampholders | |
| Specification for Electrical Measuring Instruments for Use on Intrinsically Safe Circuits in Coal Mines | |
| Specification for Electrolytically Zinc Coated Steel Flat Rolled Products | |
| Specification for festoon and temporary lighting cables and cords | |
| Specification for Fibre Rope Cargo Nets | |
| Specification for filters for use during welding and similar industrial operations | |
| Specification for fireguards for use with portable, free-standing or wall-mounted heating appliances | |
| Specification for fireguards for use with solid fuel appliances | |
| Specification for Flameproof Equipment for Diesel Engines for the Use in Coal Mines and Other Mines Susceptible to Firedamp | |
| Specification for Flasks with graduated necks (phenols type) | |
| Specification for Glass beakers for laboratory use | |
| Specification for Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type Beta Format | |
| Specification for Holes in Dozer End Bits for Earth Moving Machinery | |
| Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases) | |
| Specification for Installation of gas-fired hot water boilers of rated inputs between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases | |
| Specification for Integrating-Averagin g Sound Level Meters | |
| Specification for Interconnection of Electrical Apparatus, Constructed to Two or More British Standards, for Use in Mines Susceptible to Firedamp | |
| Specification for lampholders for tubular fluorescent lamps and starterholders | |
| Specification for Light gauge copper tubes | |
| Specification for limits and measurements of spurious signals generated by data processing and electronic office equipment | |
| Specification for Limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware | |
| Specification for Low Voltage Switchgear and Controlgear for Industrial Use. Single Hole Mounted Control Switches and Indicator Lights. Mounting Dimensions | |
| Specification for Low-voltage switchgear and controlgear for industrial use - Size numbers and gauges for flat connections | |
| Specification for main dimensions of, and terminology for, cloth rollers in textile machinery | |
| Specification for Manually Operated Torque Wrenches and Drivers | |
| Specification for Marking Transit Information on Packages for Distribution | |
| Specification for Men\x92s uniform shirts | |
| Specification for Modular coordination in building | |
| Specification for Optical Performance of High Visibility Garments and Accessories for Use on the Highway | |
| Specification for Orthodontic resins | |
| Specification for Packagings resistant to opening by children | |
| Specification for Paper and print for optical character recognition (OCR) | |
| Specification for Performance of Handles and Handle Assemblies Attached to Cookware | |
| Specification for personal weighing machines for domestic use | |
| Specification for polyester glass mat sheets for electrical purposes | |
| Specification for Polyethylene damp-proof courses for masonry | |
| Specification for portable photoelectric photometers | |
| Specification for Portland Pulverized Fuel Ash Cements | |
| Specification for Pozzolanic Cement with Pulverized-Fuel Ash as Pozzolana | |
| Specification for PVC insulation and sheath of electric cables | |
| Specification for refined cottonseed oil | |
| Specification for saddle trees made from wood | |
| Specification for Safety Devices and Water Supply Connections for Washing Machines, Dishwashers and Tumbler Dryers Connected to the Water Supply Mains | |
| Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking | |
| Specification for safety requirements for baby nests | |
| Specification for Servicing Valves (Copper Alloy) for Water Services | |
| Specification for Shanks for Pneumatic Tools and Fitting Dimensions of Chuck Bushings | |
| Specification for Shotbolts (solenoid operated) for guarding machinery | |
| Specification for Staple type connectors for hydraulic fluid power applications | |
| Specification for Steering Capability of Rubber Tyred Earth- Moving Machines | |
| Specification for Sugar Flasks | |
| Specification for Through Thickness Reduction of Area of Steel Plates and Wide Flats | |
| Specification for Tracheal Tube Connectors | |
| Specification for Trailing Cables for Mining Purposes | |
| Specification for Vitrified clay pipes, fittings and joints | |
| Specification for Zinc Alloy Sheet and Strip for Building | |
| Specification. Insulated flexible cords | |
| Specifications and Testing of Compressed Air Dryers | |
| Specifying Characteristics of Resilient Shaft Couplings | |
| Spectacle Frames - Part 1: Specification for General Requirements | |
| Spectacle Frames Part 2: Specification for Marking | |
| Spectacle Frames | |
| Stainless steel bars for the reinforcement of and use in concrete - Requirements and test methods | |
| Steel Windows, Sills, Window Boards and Doors | |
| Surface Roughness Terms Part 1: Surface and Its Parameters | |
| Surface Roughness Terms Part 2: Measurement of Surface Roughness Parameters | |
| Technical Safety Requirements for the Design and Construction of Injection Moulding Machines for Plastics and Rubber | |
| Telecommunications equipment and telecommunications cabling \x96 Specification for installation, operation and maintenance | |
| Terms for Cylindrical Screw Threads | |
| Terms for Loaders Used for Earth-Moving | |
| Terms Used in the Iron and Steel Industry Part 1: Glossary of Heat Treatment Terms | |
| Terms Used in the Iron and Steel Industry Part 2: Glossary of Terms Used in Classifying and Defining Steel Industry Products by Shape and Dimensions | |
| Terms Used in the Iron and Steel Industry Part 3: Definition and Classification of Grades of Steel | |
| Testing of Valves - Part 1: Specification for Production Pressure Testing Requirements | |
| Testing of Valves - Part 2: Specification for Fire Type-Testing Requirements | |
| Textile lifting slings \x97 Part 1: Specification for lifting slings for general service made from certain natural and man-made fibre ropes | |
| Textile Lifting Slings Part 2: Roundslings Made of Man-Made Fibre for General Service | |
| Thermal Insulation of Cavity Walls Using Man-Made Mineral Fibre Batts (Slabs) - Part 2: Code of Practice for Installation of Batts (Slabs) Filling the Cavity | |
| Thermal Insulation of Cavity Walls Using Man-Made Mineral Fibre Batts (Slabs) Part 1: Man-Made Mineral Fibre Batts (Slabs) | |
| Thermal Packs and Drink Coolers | |
| Thermoplastics Hot Water Bottles Part 1: Hot Water Bottles Manufactured from PVC Compounds | |
| Thermoplastics Hot Water Bottles Part 2: Specification for Hot Water Bottles Manufactured from Polyolefin Materials | |
| Tool Shanks with 7/24 Taper for Automatic Tool Changers \x97 Part 4: Specification for Functional Dimensions of Front Faces of Spindle Holders for Machine Centres | |
| Tool Shanks with 7/24 Taper for Automatic Tool Changers Part 1: Specification for Shanks Nos. 40, 45 and 50 | |
| Tool Shanks with 7/24 Taper for Automatic Tool Changers Part 2: Retention Knobs for Shanks Nos. 40, 45 and 50 | |
| Tool Shanks with 7/24 Taper for Automatic Tool Changers Part 3: Specification for Tapers for Spindle Noses | |
| Track widths for agricultural tractors and machinery | |
| Tracked Changes (Redline) - Flexible hoses, end fittings and sockets for gas burning appliances.Part 1: Strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st, 2nd... | |
| Tracked Changes (Redline) - Manufacture of saddle trees made from wood \x96 Specification | |
| Tracked Changes (Redline) - Organizational resilience - Code of practice | |
| Tracked Changes (Redline) - Stainless steel bars \x96 Reinforcement of concrete \x96 Requirements and test methods | |
| Training of Mechanics Concerned with the Operation and Maintenance of Earth- Moving Machinery | |
| Transportable Accommodation Units Part 1: Recommendations for Design and Construction | |
| Transportable accommodation units Part 2: Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation | |
| Type C Helical Video Tape Recorders | |
| Vehicle Parking Control Equipment Part 1: Specification for Coin Operated Clockwork Parking Meters | |
| Vehicle Parking Control Equipment Part 2: Electrically Powered Parking Meters | |
| Vehicle Parking Control Equipment Part 3: Pay and Display Equipment | |
| Vehicle Parking Control Equipment Part 4: Specification for Barrier Type Parking Control Equipment | |
| Vehicle Parking Control Equipment Part 5: Guide to the Requirements for Non- Coin Operated Apparatus for Use with Parking Control Equipment | |
| Vehicle Parking Control Equipment Part 6: Specification for Pay-On-Foot Parking Control Equipment | |
| Vehicle Parking Control Equipment Part 7. Specification for Parking Discs | |
| Vehicle Parking Control Equipment Part 8. Specification for Pre-Purchased Parking Vouchers | |
| Vocabulary Relating to Laboratory Apparatus Made Essentially from Glass, Porcelain or Vitreous Silica Part 1: Names for Items of Apparatus | |
| Wall Hung Rinse Basins. Connecting Dimensions | |
| Wideband Cabled Distribution Systems - Part 1: Glossary of Terms | |
| Wideband Cabled Distribution Systems - Part 2: Methods of Measurement | |
| Wideband Cabled Distribution Systems - Part 5. Recommendations for One-Way and Interactive Data Services | |
| Wideband Cabled Distribution Systems Part 3: Specification for Performance Requirements, Including System Safety, for Downstream Television and F.M. Sound Radio Signals | |
| Wideband Cabled Distribution Systems Part 4: Specification for Performance Requirements, Including System Safety, for Upstream Television | |
| Wideband Cabled Distribution Systems Part 6: Safety Requirements |
| << Prev | Next >> |