Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
296
297
298
299
300
301
302
303
304
305
306
307
308
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 35 mm Microcopying of Newspapers for Archival Purposes | |
| A6-Size Microfiche for the Motor Industry | |
| Adhesives for Use with Ceramic Tiles and Mosaics | |
| Agricultural Discs: Classification, Main Fixing Dimensions and General Requirements | |
| Analogue Signals for Process Control Systems Part 1: Specification for Direct Current Signals | |
| Analogue Signals for Process Control Systems Part 2: Direct Voltage Signals | |
| Analysis of Animal Feeding Stuffs Part 14: Determination of Urea Content | |
| Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols | |
| Asphalt for roads and other paved areas \x97 Specification for transport, laying, compaction and product type testing protocols | |
| Audio Visual, Video and Television Equipment and Systems Part 13: Specification for a Digital Counter for Audio Cassette Systems | |
| Audio-visual, video and television equipment and systems Part 15. Specification for audio pages | |
| Audio-Visual, Video and Television Equipment and Systems Part 16: Specification for Labelling for Educational Audio Cassettes | |
| Audio-Visual, Video and Television Equipment and Systems Part 1: General | |
| Audio-Visual, Video and Television Equipment and Systems Part 20: Methods of Measuring and Reporting the Performance of 16 mm Sound Film Projectors | |
| Audio-Visual, Video and Television Equipment and Systems Part 3: Connectors for the Interconnection of Equipment in Audio- Visual Systems | |
| Audio-Visual, Video and Television Equipment and Systems Part 5: Control, Synchronization and Address Codes Sec 5.2: Method of Operation for Pulsed Cue Tone Control Systems for Two Still Projectors | |
| Audio-Visual, Video and Television Equipment and Systems Part 5: Control, Synchronization and Address Codes Section 5.1: Synchronize Tape/Visual Operating Practice | |
| Audio-Visual, Video and Television Equipment and Systems Part 7: Guide for Safe Handling and Operation of Audiovisual Equipment | |
| Audio-Visual, Video and Television Equipment and Systems Part 8: Symbols and Identification | |
| Audio-visual, video and television equipment and systems. Recommendations for preferred matching values for the interconnection of equipment in a system | |
| Audiovisual, Video and Television Equipment and Systems Part 10: Specification for Audio Cassette Systems | |
| Audiovisual, Video and Television Equipment and Systems Part 11: Methods for Operating Video Recording Systems to Facilitate Browsing | |
| Audiovisual, Video and Television Equipment and Systems Part 17: Methods for Specifying and Measuring the Performance Characteristics of Audio-Learning Systems | |
| Audiovisual, Video and Television Equipment and Systems Part 18: Specification for Connectors for Automatic Slide Projectors with Built-in Triacs for Audiovisual Application | |
| Automatic Gas Burners Part 1: Specification for Burners with Input Rating 60kW and Above | |
| Automatic Gas Burners Part 2: Packaged Burners with Input Rating 7.5kW up to but Excluding 60kW | |
| Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 4: Dynamic Stress Tests | |
| Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 7: Mechanical Operating Tests and Sealing Tests | |
| Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Methods Part 3: Current Carrying Capacity Tests | |
| Blankets suitable for use in the public sector - Part 1: Specification for wool and wool/polyamide blankets | |
| Blankets suitable for use in the public sector - Part 2: Specification for cotton leno cellular blankets | |
| Blankets suitable for use in the public sector - Part 3: Specification for synthetic fibre cellular blankets | |
| Blankets Suitable for Use in the Public Sector Part 4: Specification for Flammability Performance | |
| Borosilicate Glass Tubing for Laboratory Apparatus | |
| Building Setting Out and Measurement Part 1: Methods of Measuring, Planning and Organization and Acceptance Criteria | |
| Building Setting out and Measurement Part 2: Measuring Stations and Targets | |
| Building Setting-Out and Measurement Part 3: Check-Lists for the Procurement of Surveys and Measurement Services | |
| Calculation of Operating Power and Tensile Forces in Belt Conveyors with Carrying Idlers on Continuous Mechanical Handling Equipment | |
| Carbon steel castings for ships and for marine engine and general engineering purposes | |
| Channel Spacing for Sound Broadcasting in Band 7 (HF) - Section 10A-1 - Amplitude-Modulation Sound Broadcasting in Bands 5 (LF), 6 (MF) and 7 (HF) | |
| CHANNEL SPACING FOR SOUND BROADCASTING IN BAND 7 (HF) | |
| Chemical Analysis of Rubber Part 1: Determination of Ash | |
| Chemical Analysis of Rubber Part 3: Determination of Volatile Matter Content of Raw Rubbers | |
| Children\xb4s Anoraks | |
| Coated Fabrics for Upholstery Part 2: PVC Coated Woven Fabrics | |
| Coated fabrics for upholstery. Part 1: Specification for PVC coated knitted fabrics | |
| Code of Practice for Access and Working Scaffolds and Special Scaffold Structures in Steel | |
| Code of Practice for Access for the Disabled to Buildings | |
| Code of practice for Control of Undesirable Static Electricity Part 1: General Considerations | |
| Code of practice for Control of undesirable static electricity Part 2. Recommendations for particular industrial situations | |
| Code of Practice for Falsework | |
| Code of practice for fire precautions in chemical plant | |
| Code of Practice for Flues and Flue Structures in Buildings | |
| Code of practice for ground investigations | |
| Code of practice for handling of electrostatic sensitive devices | |
| Code of practice for Machine laid in situ edge details for paved areas | |
| Code of Practice for Plastics Pipework (Thermoplastics Materials) Part 8: Installation of Thermoplastics Pipes and Associated Fittings for Use in Domestic Hot and Cold Water Services and Heating Systems | |
| Code of practice for Remote Centres for Intruder Alarm Systems | |
| Code of Practice for Site Investigations | |
| Code of Practice for Solar Heating Systems for Domestic Hot Water | |
| Code of practice for Temporarily Installed Suspended Scaffolds and Access Equipment | |
| Code of practice for temporary works procedures and the permissible stress design of falsework | |
| Code of Practice for Testing of Computer- Based Systems | |
| Code of Practice for the Installation of Gas-Fired Ducted-Air Heaters of Rated Input not Exceeding 60kW (2nd Family Gases) | |
| Code of Practice for the Storage and On-Site Treatment of Solid Waste from Buildings | |
| Code of practice for Thermal Insulation of Pipework and Equipment (in the Temperature Range -100 Degrees Celsius to +870 Degrees Celsius) | |
| Code of Practice for Trees in Relation to Construction | |
| Combined Flexible Material for Electrical Insulation Part 2: Methods of Test | |
| Combined flexible materials for electrical insulation Part 1. Definitions and general requirements | |
| Computer Programming Language RTL/2 | |
| Concrete pipes and ancillary concrete products - Part 1: Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) | |
| Concrete pipes and ancillary concrete products - Part 4: Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002) | |
| Concrete pipes and ancillary concrete products - Part 5: Specification for prestressed non-pressure pipes and fittings with flexible joints | |
| Concrete pipes and ancillary concrete products - Part 6: Specification for road gullies and gully cover slabs | |
| Concrete pipes and ancillary concrete products Part 1: Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) | |
| Concrete pipes and ancillary concrete products Part 3: Specification for unreinforced and reinforced concrete manholes and soakaways | |
| Concrete pipes and ancillary concrete products Part 4: Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002) | |
| Concrete pipes and ancillary concrete products Part 5: Specification for prestressed non-pressure pipes and fittings with flexible joints | |
| Concrete pipes and ancillary concrete products Part 6: Specification for road gullies and gully cover slabs | |
| Control Symbols for Powered Industrial Trucks | |
| Cores for Inductors and Transformers for Telecommunications Part 1: Methods of Measurement | |
| Cores for Inductors and Transformers for Telecommunications Part 2: Guide to the Drafting of Performance Specifications | |
| Cotton and Man-Made Fibre Blend Sheeting, Sheets, Pillowslips, Towels and Napkins for Use in the Public Sector | |
| D.C. Bridges for Measuring Resistance | |
| D.C. Potentiometers | |
| Design of Buildings: Ventilation Principles and Designing for Natural Ventilation | |
| Designation and Multilingual Nomenclature for Diamond or Cubic Boron Nitride Grinding Wheels and Saws | |
| Determination of Coefficients of Friction of Plastic Film and Sheeting for Use as Electrical Insulation | |
| Determination of Colour of Petroleum Products | |
| Determination of Resistance to Intergranular Corrosion of Austenitic Stainless Steels: Copper Sulphate-Sulphuric Acid Method (Moneypenny Strauss Test) | |
| Determination of Stock Concentration of Pulps (Rapid Method) | |
| Determination of the Electric Strength of Insulating Oils | |
| Determination of the Resistance to Pilling of Woven Fabrics (Pill Testing Box Method) | |
| Determining the Comparative and the Proof Tracking Indices of Solid Insulating Materials under Moist Conditions | |
| Dimensions of Driving Tenons and Sockets for Parallel Shank Drills and Machine Reamers | |
| Dimensions of Mechanical Structures of the 482.6mm (19in) Series Part 2: Cabinets and Pitches of Rack Structures | |
| Dimensions of Mechanical Structures of the 482.6mm (19in) Series Part 3: Subracks and Associated Plug-In Units | |
| Dimensions of Panels and Racks for Electronic Equipment | |
| Dimensions of Rotary Vane Feeders for Continuous Mechanical Handling Equipment | |
| Drain, Fill and Level Plugs for Earth-Moving Machinery | |
| Dry Packaged Cementitious Mixes Part 2: Prepacked Mortar Mixes | |
| Dry prepacked concrete - Specification | |
| Educational Furniture Part 1: Functional Dimensions, Identification and Finish of Chairs and Tables for Educational Institutions | |
| Educational Furniture Part 2: Specification for Strength and Stability of Chairs for Educational Institutions | |
| Educational Furniture Part 3: Specification for Strength and Stability of Tables for Educational Institutions | |
| Educational Furniture Part 4: Specification for Strength and Stability of Storage Furniture for Educational Institutions | |
| Educational Furniture Part 5: Specification for Security of Fixed Secure Storage Furniture for Educational Institutions | |
| Electrically-driven Point-operating machines for railways | |
| Fabrics for curtains, drapes and window blinds - Part 2: Flammability requirements - Specification | |
| Factors Influencing the Limits of Amplitude-Modulation Sound-Broadcasting Coverage in Band 6 (MF) - Section 10A-1 - Amplitude-Modulation Sound Broadcasting in Bands 5 (LF), 6 (MF) and 7 (HF) | |
| FACTORS INFLUENCING THE LIMITS OF AMPLITUDE-MODULATION SOUND-BROADCASTING COVERAGE IN BAND 6 (MF) | |
| Fire and explosion precautions at premises handling flammable gases, liquids and dusts - Part 1: Code of practice for precautions against fire and explosion in chemical plants, chemical storage and... | |
| Fire and explosion precautions at premises handling flammable gases, liquids and dusts - Part 2: Guide to applicable standards and regulations | |
| Fire Detection and Alarm Systems for Buildings Part 4: Specification for Control and Indicating Equipment | |
| Fire Detection and Alarm Systems for Buildings Part 6: Code of Practice for the Design and Installation of Fire Detection and Alarm Systems in Dwellings | |
| Fire Detection and Alarm Systems for Buildings Part 8: Code of Practice for the Design, Installation and Servicing of Voice Alarm Systems | |
| Fire Detection and Alarm Systems in Buildings - Part 5: Optical Beam Smoke Detectors | |
| Fire Detection and Alarm Systems in Buildings Part 2: Specifications for Manual Call Points | |
| Fire Detection and Alarm Systems in Buildings Part 3: Automatic Release Mechanisms for Certain Fire Protection Equipment | |
| Fire detection and alarm systems in buildings. Code of practice for installation and servicing | |
| Fire detection and fire alarm systems for buildings - Part 1: Code of practice for system design, installation, commissioning and maintenance | |
| Fire detection and fire alarm systems for buildings Part 6: Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises... | |
| Fire detection and fire alarm systems for buildings Part 9: Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems | |
| Fire Tests for Furniture Part 1. Methods of Test for the Ignitability by Smokers' Materials of Upholstered Composites for Seating | |
| Fire tests for furniture Part 2: Methods of test for the ignitability of upholstered composites for seating by flaming sources | |
| Glass Condensers for Laboratory Use | |
| Glossary of terms Cereals and Cereal Products | |
| Glossary of terms for Compressors, pneumatic tools and machines - Part 2: Compressors | |
| Glossary of Terms for compressors, pneumatic tools and machines - Part 3: Pneumatic tools and machines | |
| Glossary of Terms for Compressors, Pneumatic Tools and Machines Part 1: General | |
| Grain Sizes of Diamond or Cubic Boron Nitride | |
| Grid System for Printed Circuits | |
| Guards and Shields for Earth-Moving Machinery | |
| Guide for Choice of Colours to Be Used for the Marking of Capacitors and Resistors | |
| Guide for Expression of the Performance of Pulse Generators | |
| Guide for Laying of Asbestos - Cement Pipelines | |
| Guide for Storage and Handling of Conveyor Belts | |
| Guide for Subjective Listening Tests for Sound Radio Receivers | |
| Guide for Subjective Viewing Tests for Television Receivers | |
| Guide for the Interpretation of the Analysis of Gases in Transformers and Other Oil-Filled Electrical Equipment in Service | |
| Guide on Power Transformers Part 1: Application of Power Transformers | |
| Guide to CAMAC: Organization of Multi-Crate Systems: Specification of the Branch-Highway and CAMAC Crate Controller Type A1 | |
| Guide to Ionizing Radiation Thickness Meters for Materials in the Form of Sheets, Coatings or Laminates | |
| Guide to the Use of Variable Capacitors in Electronic Equipment | |
| Hexachlorethane | |
| High fidelity audio equipment and systems; minimum performance requirements - Part 4: Specification for magnetic recording and reproducing equipment | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements - Part 6: Specification for Amplifiers | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 11: High Fidelity Systems for Use in Vehicles (For Example, Motor Cars); General Requirements | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 12: Specification for the Sound Output of Television Tuners | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 13: High Fidelity Systems for Use in Vehicles (For Example, Motor Cars); FM Radio Tuner Units | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 1: General Requirements | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 2: Specification for FM Radio Tuners | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 3: Specification for Record Playing Equipment and Cartridges | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 5: Specification for Microphones | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 7: Specification for Loudspeakers | |
| High Fidelity Audio Equipment and Systems; Minimum Performance Requirements Part 8: Specification for Combination Equipment | |
| High Tensile Steel Wire and Strand for the Prestressing of Concrete | |
| High Voltage Fuse-Links for Motor Circuit Applications | |
| Hot Rolled Asphalt for Roads and Other Paved Areas Part 1: Constituent Materials and Asphalt Mixtures | |
| Hot Rolled Asphalt for Roads and Other Paved Areas Part 2: Transport, Laying and Compaction of Rolled Asphalt | |
| Household Sewing Machines Part 1: Method for Determination of the Stability of Needle Thread Tension | |
| Household Sewing Machines Part 2: Method for Determination of Sewing Capacity | |
| Household sewing machines Part 3. Method for determination of creep of one ply of material over another | |
| Industrial Process Control Valves Part 2: Flow Capacity Section 2.1: Sizing Equations for Incompressible Fluid Flow Under Installed Conditions | |
| Industrial Process Control Valves Part 2: Flow Capacity Section 2.2: Sizing Equations for Compressible Fluid Under Installed Conditions | |
| Industrial Process Control Valves Part 5: Specification for Marking | |
| Industrial Process Control Valves Part 6: Mounting Details for Attachment of Positioners to Control Valve Actuators | |
| Industrial-Process Control Valves Part 1: Specification and Terminology for Control Valves | |
| Industrial-Process Control Valves Part 8: Noise Considerations Section 8.2: Method for Laboratory Measurement of Noise Generated by Hydrodynamic Flow Through Control Valves | |
| Industrial-process control valves. Part 3: Dimensions. Section 3.2: Specification for face-to-face dimensions for flangeless control valves except wafer butterfly valves | |
| Industrial-process control valves. Part 4: Specification for inspection and routine testing | |
| Industrial-process control valves. Part 8: Noise considerations. Section 8.1: Method for laboratory measurement of noise generated by aerodynamic flow through control valves | |
| Installation of Gas Fires, Convector Heaters, Fire/Back Boilers and Decorative Fuel Effect Gas Appliances Part 1: Gas Fires, Convector Heaters and Fire/Back Boilers (1st, 2nd and 3rd Family Gases) | |
| Installation of Gas Fires, Convector Heaters, Fire/Back Boilers and Decorative Fuel Effect Gas Appliances Part 2: Inset Live Fuel Effect Gas Fires of Heat Input Not Exceeding 15 kW (2nd... | |
| Installation of Gas Fires, Convector Heaters, Fire/Back Boilers and Decorative Fuel Effect Gas Appliances Part 3: Decorative Fuel Effect Gas Appliances of Heat Input Not Exceeding 15 kW (2nd and... | |
| Interface Between Numerical Controls and Industrial Machines | |
| Internal Diameters of Round Hermetically Sealed Metal Cans for Food and Non-Carbonated Drinks | |
| Lintels - Part 1: Method for assessment of load | |
| Lintels Part 2: Prefabricated Lintels | |
| Magnetic Tape Cassette and Cartridge Labelling and File Structure, for Information Interchange Part 1: Label Standard Version 1 | |
| Materials for Plain Bearings Part 1: Specification for Aluminium Alloy for Solid Bearings | |
| Maximum Actuating Forces for Tractor Controls | |
| Measurement and Calibration Systems Part 1: Specification of Systems Requirements | |
| Measurement and Calibration Systems Part 2: Guide to the Use of BS 5781 Part 1 | |
| Measurement of airborne noise from hydraulic fluid power systems and components - Part 5: Simplified method of determining sound power levels from pumps using an anechoic chamber | |
| Measurement of Airborne Noise from Hydraulic Fluid Power Systems and Components Part 1: Method of Test for Pumps | |
| Measurement of Airborne Noise from Hydraulic Fluid Power Systems and Components Part 2: Method of Test for Motors | |
| Measurement of Airborne Noise from Hydraulic Fluid Power Systems and Components Part 3: Guide to the Application of Part 1 and Part 2 | |
| Measurement of Airborne Noise From Hydraulic Fluid Power Systems and Components Part 4. Method of Determining Sound Power Levels from Valves Controlling Flow and Pressure | |
| Measurement of Airborne Noise from Hydraulic Fluid Power Systems and Components Part 6: Method of Test for Pumps Using a Parallelepiped Microphone Array | |
| Measurement of Conductive Liquid Flow in Closed Conduits Part 1: Method Using Electromagnetic Flowmeters | |
| Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 1: Measurement of Water Flow Section 1.4: Transit Time Method Using Non- Radioactive Tracers | |
| Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 2: Measurement of Gas Flow Section 2.1: General | |
| Measurement of Fluid Flow in Closed Conduits, Using Tracers Part 2: Measurement of Gas Flow Section 2.4: Transit Time Method Using Radioactive Tracers | |
| Measuring the Efficiency of Hydraulic Turbines, Storage Pumps and Pump-Turbines (Thermodynamic Method) | |
| Metal Tab Washers for General Engineering Purposes. Metric Series | |
| Method for Analysis of Animal Feeding Stuffs - Part 8: Determination of Moisture | |
| Method for Analysis of Animal Feeding Stuffs Part 9: Determination of Castor Oil Seed Husks | |
| Method for determination of air resistance (Gurley) of paper and board | |
| Method for Determination of Dimensional Change of Textiles in Domestic Washing and Drying | |
| Method for Determination of dimensions of textile floor covering test specimens | |
| Method for Determination of grammage of single layers of solid fibreboard | |
| Method for Determination of Ground Speed of Earth-Moving Machinery | |
| Method for determination of limiting viscosity number of raw rubbers | |
| Method for Determination of water absorption of paper and board after immersion in water | |
| Method for Expression of the Properties of Sampling Oscilloscopes | |
| Method for Hydrogen Embrittlement Test for Copper | |
| Method for Measurement of dimensional change of paper after immersion in water | |
| Method for Rating Sound Insulation in Buildings and of Building Elements Part 1. Method for Rating the Airborne Sound Insulation in Buildings and of Interior Building Elements | |
| Method for Rating Sound Insulation in Buildings and of Building Elements Part 3: Method for Rating the Airborne Sound Insulation of Facade Elements and Facades | |
| Method for Scale adhesion test for oxygen-free copper | |
| Method for Thermal Classification for Phlogopite Mica Splittings | |
| Method of Expression of Performance of Air Quality Infra-Red Analysers | |
| Method of Measurement of Thickness for Mica Blocks, Thins, Films and Splittings | |
| Method of Measuring and Defining the Characteristics of Anti-Scatter Grids Used in X-ray Equipment | |
| Method of Specifying Inductive Voltage Dividers | |
| Method of test for Determination of the Punking Behaviour of Phenol-formaldehyde Foam | |
| Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures | |
| Method of Test for Static Loading of Protective Cabs and Frames for Agricultural Wheeled Tractors, Including Acceptance Conditions | |
| Method of Visual Classification for Muscovite Mica Blocks, Thins and Films | |
| Methods for Analysis of Animal Feeding Stuffs - Part 10: Preparation of Test Samples | |
| Methods for Analysis of Animal Feeding Stuffs - Part 16: Determination of Aflatoxin B1 Content of Mixed Feeding Stuffs (High-Performance Liquid Chromatographic Method) | |
| Methods for Analysis of Animal Feeding Stuffs - Part 17: Determination of Furazolidone Content - Method Using High-Performance Liquid Chromatography | |
| Methods for Analysis of Animal Feeding Stuffs - Part 18: Determination of Fat Content | |
| Methods for Analysis of Animal Feeding Stuffs - Part 19: Determination of Starch Content - Polarimetric Method | |
| Methods for Analysis of animal feeding stuffs - Part 1: Determination of crude ash | |
| Methods for Analysis of Animal Feeding Stuffs - Part 21: Determination of Potassium and Sodium Contents - Methods Using Flame-Emission Spectrometry | |
| Methods for Analysis of Animal Feeding Stuffs - Part 22: Determination of Residues of Organochlorine Pesticides - Gas Chromatographic Method | |
| Methods for Analysis of Animal Feeding Stuffs - Part 23: Determination of Crude Fibre Content - Method with Intermediate Filtration | |
| Methods for Analysis of animal feeding stuffs - Part 2: Determination of ash insoluble in hydrochloric acid | |
| Methods for Analysis of Animal Feeding Stuffs - Part 3: Determination of Total Phosphorus Content (Spectrophotometric Method) | |
| Methods for Analysis of Animal Feeding Stuffs - Part 4: Determination of Nitrogen Content and Calculation of Crude Protein Content | |
| Methods for Analysis of Animal Feeding Stuffs - Part 5: Determination of Water-Soluble Chlorides Content | |
| Methods for Analysis of Animal Feeding Stuffs Part 11: Determination of Calcium by Titration | |
| Methods for Analysis of Animal Feeding Stuffs Part 12: Determination of Gossypol | |
| Methods for Analysis of Animal Feeding Stuffs Part 13: Determination of Zearalenone | |
| Methods for Analysis of Animal Feeding Stuffs Part 15: Determination of Soluble Nitrogen Content After Treatment with Pepsin in Dilute Hydrochloric Acid | |
| Methods for Analysis of Animal Feeding Stuffs Part 6: Determination of Calcium by Atomic Absorption Spectrometry | |
| Methods for analysis of animal feeding stuffs. Determination of aflatoxin B | |
| Methods for biological assessment of dental materials | |
| Methods for Chemical analysis of rubber - Part 2: EDTA titrimetric method for determination of zinc content of rubber products | |
| Methods for Determination of relative magnetic permeability of feebly magnetic materials | |
| Methods for Determination of Size, Squareness and Straightness of Edge of Textile Floor Covering Tiles | |
| Methods for Determining the Curl of Photographic Film | |
| Methods for Field Pressure Testing of Asbestos-Cement Pipelines | |
| Methods for Measurement and recording for orthopaedic footwear | |
| Methods for measurement of Fluid flow in closed conduits, using tracers - Part 1: Measurement of water flow - Section 1.1 General | |
| Methods for Measurement of fluid flow in closed conduits, using tracers - Part 1: Measurement of water flow - Section 1.2 Constant rate injection method using non-radioactive tracers | |
| Methods for measurement of Fluid flow in closed conduits, using tracers - Part 1: Measurement of water flow - Section 1.3 Constant rate injection method using radioactive tracers | |
| Methods for measurement of Fluid flow in closed conduits, using tracers - Part 1: Measurement of water flow - Section 1.5 Transit time method using radioactive tracers [ISO title: Measurement... | |
| Methods for Measurement of Gassing of Insulating Liquids Under Electrical Stress and Ionization | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs - Part 7: Enumeration of Staphylococcus Aureus by Colony Count Technique | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs Part 10: Enumeration of Enterobacteriaceae | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs Part 14: Detection of Vibrio Parahaemolyticus | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs Part 15: Detection of Enterobacteriaceae with Pre-Enrichment | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs Part 16: Detection of Presumptive Pathogenic Yersinia Enterocolitica | |
| Methods for Microbiological Examination of Food and Animal Feeding Stuffs Part 17: Detection of Thremotolerant Campylobacter | |
| Methods for microbiological examination of food and animal feeding stuffs. Detection of Salmonella | |
| Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms - colony count technique at 30\xb0C | |
| Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms - most probable number technique at 30\xb0C | |
| Methods for microbiological examination of food and animal feeding stuffs. Enumeration of micro-organisms - colony count technique at 30\xb0C (poured plate technique) | |
| Methods for Rating the sound insulation in buildings and of building elements Part 2. Method for rating the impact sound insulation | |
| Methods for Sensory Analysis of Food - Part 10: General Guidance and Test Method for Assessment of the Colour of Foods | |
| Methods for Sensory Analysis of Food Part 2: Paired Comparison Test | |
| Methods for Sensory Analysis of Food Part 3: Triangular Test | |
| Methods for Sensory Analysis of Food Part 4: Flavour Profile Methods | |
| Methods for Sensory Analysis of Food Part 5: 'A'- 'Not A' Test | |
| Methods for Sensory Analysis of Food Part 6: Ranking | |
| Methods for Sensory Analysis of Food Part 7: Investigating Sensitivity of Taste | |
| Methods for Sensory Analysis of Food Part 8: Duo-Trio Test | |
| Methods for Sensory Analysis of Food Part 9: Initiation and Training of Assessors in the Detection and Recognition of Odours | |
| Methods for sensory analysis of food. Introduction and general guide to methodology | |
| Methods of Calibrating Leak-Detectors of the Mass-Spectrometer Type Used in the Field of Vacuum Technology | |
| Methods of measurement of fluid flow: estimation of uncertainty of a flow-rate measurement | |
| Methods of Test for Assessment of the Ignitability of Upholstered Seating by Smouldering and Flaming Ignition Sources | |
| Methods of Test for Determination of Certain Physical and Mechanical Properties of Timber in Structural Sizes | |
| Methods of Test for Surface Finishes for Furniture Part 1: Assessment of Surface Resistance to Cold Liquids | |
| Methods of Test for Verification of Stability of Industrial Trucks Operating in Special Condition of Stacking with Mast Tilted Forward | |
| Methods of Test for Verification of Stability of Pallet Stackers and High Lift Platform Trucks | |
| Metric Needle Roller Bearings Part 1: Dimensions and Tolerances of Needle Roller Bearings: Light and Medium Series | |
| Metric Needle Roller Bearings Part 2: Dimensions and Tolerances of Needle Roller Bearings, Drawn Cup, without Inner Ring | |
| Metric Needle Roller Bearings Part 3: Dimensions and Tolerances of Radial Needle Roller and Cage Assemblies | |
| Metric Needle Roller Bearings Part 4: Dimensions and Tolerances of Thrust Needle Roller and Cage Assemblies, Thrust Washers | |
| Metric Needle Roller Bearings Part 5: Dimensions of Needle Rollers | |
| Metric Needle Roller Bearings Part 6: Tolerances of Needle Rollers | |
| Metric Needle Roller Bearings Part 7: Dimensions of Track Rollers | |
| Metric Needle Roller Bearings Part 8: Tolerances of Track Rollers | |
| Metric Needle Roller Bearings Part 9: Dimensions and Tolerances of Needle Roller Bearings-Heavy Series | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 0: General Laboratory Practices | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 11: Enumeration of Bacillus Cereus | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 12: Enumeration of Yeasts and Moulds | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 13: Enumeration of Escherichia Coli: Colony Count Technique Using Membranes | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 5: Enumeration of Micro-Organisms - Colony Count at 30 Degrees Celsius (Surface Plate Technique) | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 6: Preparation of Dilutions | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 8: Enumeration of Presumptive Escherichia Coli | |
| Microbiological Examination of Food and Animal Feeding Stuffs Part 9: Enumeration of Clostridium Perfringens | |
| Mobile, Manually Operated Patient-Lifting Devices | |
| Motor Starters and Controllers | |
| Office Furniture Part 1: Design and Dimensions of Office Workstations, Desks, Tables and Chairs | |
| Operating Conditions for Industrial-Process Measurement and Control Equipment Part 1: Specification for Temperature, Humidity and Barometric Pressure | |
| Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power | |
| Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Methods for Assessing Degree of Immunity of Systems or Parts of Systems Where Subjected to Mechanical Influences | |
| Operating Conditions for Industrial-Process Measurement and Control Equipment Part 4: Classification of Corrosive and Erosive Environmental Conditions | |
| Operating Instrumentation for Earth-Moving Machinery | |
| Overhead Guards for High-Lift Rider Trucks | |
| Overview of the BS 5839-1 Fire detection and alarm systems for non-domestic premises. Technical Solution Pack | |
| Packages for Certain Pre-Packed Foodstuffs; Capacities of Glass and Metal Containers | |
| Photographic Flash Equipment Part 6: Determination of Flash Guide Numbers | |
| Photographic Flash Equipment Part 7: Determination of the Light Output of Electronic Flash Equipment | |
| Photographic flash equipment. Part 3: Specification for electronic single-flash equipment | |
| Plastics pipework (thermoplastics materials) - Part 6: Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers | |
| Plastics pipework (thermoplastics materials) Part 7. Recommendations for methods of thermal fusion jointing | |
| Powered Domestic Lifts | |
| Precast Concrete Pipes and Ancillary Concrete Products Part 103: Specification for Prestressed Non-Pressure Pipes and Fittings with Flexible Joints | |
| Precast Concrete Pipes and Ancillary Concrete Products Part 230: Specification for Road Gullies and Gully Cover Slabs | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 100: Unreinforced and Reinforced Pipes and Fittings with Flexible Joints | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 101: Glass Composite Concrete (GCC) Pipes and Fittings with Flexible Joints | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 120: Reinforced Jacking Pipes with Flexible Joints | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 200: Unreinforced and Reinforced Manholes and Soakaways of Circular Cross Section | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 2: Inspection Chambers and Street Gullies | |
| Precast Concrete Pipes and Fittings for Drainage and Sewerage Part 3: Ogee Jointed Concrete Pipes, Bends and Junctions, Unreinforced or Reinforced with Steel Cages or Hoops | |
| Precast Concrete Pipes, Fittings and Ancillary Products Part 110: Specification for Ogee Pipes and Fittings (Including Perforated) | |
| Precast Concrete Pipes, Fittings and Ancillary Products Part 114: Specification for Porous Pipes | |
| Pressboard and Presspaper for Electrical Purposes Part 1: Definitions and General Requirements | |
| Pressboard and Presspaper for Electrical Purposes Part 2: Methods of Test | |
| Principles of Design and Construction of Volumetric Glassware for Laboratory Use | |
| Railway rolling stock material (metric) - Part 5: Specification for steel bars for retaining rings for tyred wheels | |
| Railway Rolling Stock Material (Metric) Part 1: Axles for Traction and Trailing Stock | |
| Railway Rolling Stock Material (Metric) Part 2: Forged and Rolled Wheel Centres | |
| Railway Rolling Stock Material (Metric) Part 3: Monobloc Wheels for Traction and Trailing Stock | |
| Railway Rolling Stock Material (Metric) Part 4: Tyres | |
| Railway Rolling Stock Material (Metric) Part 5: Steel Bars for Retaining Rings for Tyred Wheels | |
| Railway rolling stock materials - Part 1: Specification for axles for traction and trailing stock | |
| Railway rolling stock materials - Part 3: Specification for monobloc wheels for traction and trailing stock | |
| Railway Rolling Stock Materials Part 6: Specification for Wheelsets for Traction and Trailing Stock | |
| Railway rolling stock materials Part 7: Specification for product and technical approval requirements for cast wheels | |
| Railway rolling stock materials Part 8: Railway applications - Wheelsets and bogies - Powered and non-powered wheelsets with inboard bearings - Product requirements | |
| Rear Mounted Power Take-Offs on Agricultural Tractors | |
| Recommendations for line spacings and character spacings for office machines and data processing equipment | |
| Recommendations for Modules for the Coordinating Dimensions of Catering Equipment Using Containers to BS 4874 | |
| Recommendations for Testing of Aggregates - Part 1: Compactibility Test for Graded Aggregates | |
| Ring-Type Hitches on Agricultural Trailers and Towed Implements | |
| Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input) Part 2: Specification for additional requirements for boilers with atmospheric burners | |
| Safety and performance of gas-fired hot water boilers (60kW to 2 MW input). Specification for additional requirements for boilers with forced or induced draught burners | |
| Safety and performance of gas-fired hot water boilers (60kW to 2 MW input). Specification for general requirements | |
| Safety of Electrical Commercial Catering Equipment Part 2: Specification for Deep Fat Fryers | |
| Safety of electrical commercial catering equipment. Part 1: Specification for ranges, ovens and hob elements | |
| Safety of electrical commercial catering equipment. Part 3: Specification for griddles and griddle grills | |
| Safety of electrical commercial catering equipment. Part 4: Specification for multi-purpose cooking pans | |
| Safety of Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes | |
| Safety Requirements for Children's High Chairs and Multi-Purpose High Chairs for Domestic Use (AMD 6681) April 30, 1991 | |
| Safety Requirements for the Construction and the Installation of Equipment for Resistance Welding and Allied Processes | |
| Sampling and examination of bituminous mixtures for roads and other paved areas - Part 112: Method for the use of road surface hardness probe | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 100: Methods for Sampling for Analysis | |
| Sampling and Examination of Bituminous Mixtures for Roads and other Paved Areas Part 101: Methods for Preparatory Treatment of Samples for Analysis | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 102: Analytical Test Methods | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 104: Methods of Test for the Determination of Density and Compaction | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 105: Methods of Test for the Determination of Texture Depth | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 106: Method for the Determination of the Stability Index of Pitch-Bitumen Binders | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 107: Method of Test for the Determination of the Composition of Design Wearing Course Rolled Asphalt | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 108: Methods for Determination of the Condition of the Binder on Coated Chippings and for Measurement of... | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 109: Methods for the Assessment of the Compaction Performance of a Roller and Recommended Procedures for the... | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 110: Methods of Test for the Determination of Wheel-Tracking Rate | |
| Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 111: Method for Determination of Resistance to Permanent Deformation of Bituminous Mixtures Subject to Unconfined Uniaxial Loading... | |
| Sampling and examination of bituminous mixtures for roads and other paved areas Part 1: Methods for the measurement of the rate of spread of coated chippings and the temperature of... | |
| Schedule of graphic symbols for machinery in the textile industry | |
| Scheme for Labelling of Footwear | |
| Screw Thread Finishes for Plastics Containers | |
| Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells | |
| Sheets, Sheeting, Pillowslips, Towels, Napkins, Counterpanes and Continental Quilt Secondary Covers Suitable for Use in the Public Sector Part 1: Sheeting, Sheets and Pillowslips | |
| Sheets, Sheeting, Pillowslips, Towels, Napkins, Counterpanes and Continental Quilt Secondary Covers Suitable for Use in the Public Sector Part 2: Towels and Napkins | |
| Sheets, Sheeting, Pillowslips, Towels, Napkins, Counterpanes and Continental Quilt Secondary Covers Suitable for Use in the Public Sector Part 3: Counterpanes and Continental Quilt Sec. Covers Including Flammability Performance | |
| Silicone Based Building Sealants | |
| Specification for a total quality assurance programme for nuclear installations | |
| Specification for Audio-visual, video and television equipment and systems Part 2. Definitions | |
| Specification for audiometers | |
| Specification for audiovisual, video and television equipment and systems. Part 14: Specification for audio striped card system | |
| Specification for black and coloured pitch mastic flooring | |
| Specification for Bottles for Laboratory Use | |
| Specification for Compacted waste containers for lift-off vehicles | |
| Specification for Computer Programming Language CORAL 66 | |
| Specification for Conformal coating material for use on printed circuit assemblies | |
| Specification for construction and operation of spirit burner for small-scale laboratory flame tests | |
| Specification for D.C. Resistive Volt Ratio Boxes | |
| Specification for Diethyl ether (technical) | |
| Specification for dimensions of 126-size cartridges, film and backing paper | |
| Specification for Dry packaged cementitious mixes - Part 1: Prepacked concrete mixes | |
| Specification for Electrically Operated Automatic Gas Shut-off Valves | |
| Specification for Electromagnetic Flowmeters | |
| Specification for Electromechanical components for electronic equipment : basic testing procedures and measuring methods Part 2. General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests... | |
| Specification for Electromechanical Components for Electronic Equipment: Basic Testing Procedures and Measuring Methods - Part 9: Miscellaneous Tests | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Part 2. General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests Supplement... | |
| Specification for Electromechanical components for electronic equipment: basic testing procedures and measuring methods Part 6. Climatic tests and soldering tests Supplement 1. Test 11b | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Climatic tests and soldering tests | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Connector tests (mechanical) and mechanical tests on contacts and terminations. Tests 15f, 16c, 16d and 16i | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Connector tests (mechanical) and mechanical tests on contacts and terminations. Tests 16g and 16h | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Connector tests (mechanical) and mechanical tests on contacts and terminations | |
| Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. General | |
| Specification for Electromechanical Components for Electronic Equipment: Testing Procedures and Measuring Methods - Part 5: Impact Tests (Free Components), Static Load Tests (Fixed Components), Endurance Tests and Overload Tests | |
| Specification for Equipment for Minehead Assay and Sorting Radioactive Ores in Containers | |
| Specification for Fabrics for curtains and drapes - Part 1: General requirements | |
| Specification for Flat-Top Chains and Associated Chainwheels for Conveyors | |
| Specification for helical-scan video-tape cassette system using 0.5 in (12.70 mm) magnetic tape (50 Hz - 625 lines) | |
| Specification for interconnections between video-tape recorders and television receivers for 50 Hz, 625 lines systems | |
| Specification for Key Numbering System and Layout Charts for Keyboards on Office Machines | |
| Specification for Laboratory Thermometers | |
| Specification for Locks and Latches for Doors in Buildings | |
| Specification for Low Voltage Switchgear and Controlgear for Industrial Use - Mounting Rails - C-Profile and Accessories for the Mounting of Equipment | |
| Specification for Low Voltage Switchgear and Controlgear for Industrial Use - Mounting Rails - G-Profile for the Fixing of Terminal Blocks | |
| Specification For Manually Driven Balanced Personal Homelifts | |
| Specification for Medicine trolleys | |
| Specification for minimum information to be included in specification sheets of duplicators | |
| Specification for motor starters for voltages above 1 kV a.c. and 1.2 kV d.c. Part 1: Direct-on-line (full voltage) a.c. starters | |
| Specification for Muscovite Mica Components for Electronic Equipment | |
| Specification for Naphthalene (Including Test Methods) | |
| Specification for numbering of divisions and subdivisions in written documents (point-numbering) | |
| Specification for permanent anchors for industrial safety belts and harnesses | |
| Specification for Photoelectric control units for road lighting | |
| Specification for photographic flash equipment. Topflash/flipflash photographic flash lamp array | |
| Specification for polymer-reinforced thermoplastics hoses for suction and discharge | |
| Specification for powered stairlifts | |
| Specification for Quantities, Units and Symbols Part 1. Space and Time | |
| Specification for Quantities, Units and Symbols Part 10. Nuclear Reactions and Ionizing Radiations | |
| Specification for Quantities, Units and Symbols Part 11. Mathematical Signs and Symbols for Use in the Physical Sciences and Technology | |
| Specification for Quantities, Units and Symbols Part 2. Periodic and Related Phenomena | |
| Specification for Quantities, Units and Symbols Part 3. Mechanics | |
| Specification for Quantities, Units and Symbols Part 4. Heat | |
| Specification for Quantities, Units and Symbols Part 5. Electricity and Magnetism | |
| Specification for Quantities, Units and Symbols Part 6. Light and Related Electromagnetic Radiations | |
| Specification for Quantities, Units and Symbols Part 7. Acoustics | |
| Specification for Quantities, Units and Symbols Part 8. Physical Chemistry and Molecular Physics | |
| Specification for Quantities, Units and Symbols Part 9. Atomic and Nuclear Physics | |
| Specification for Safety and efficiency of the gas heating equipment of commercial dishwashing machines | |
| Specification for safety of electrically energized office machines | |
| Specification for Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas Part 2. Methods for Analytical Testing | |
| Specification for Sound Level Meters | |
| Specification for Spray Mixing Taps | |
| Specification for Surface Swimming Goggles | |
| Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect appliances - Part 4: Independent gas-fired flueless fires, convector heaters and heating stoves... | |
| Specification for Thermoplastic Hose Assemblies for Dock, Road and Rail Tanker Use | |
| Specification for values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones | |
| Specification for Wood Trim (Softwood) | |
| Specification for X and Y Reference Radiations for Calibrating Dosemeters and Dose Ratemeters and for Determining Their Response as a Function of Photon Energy | |
| Specifications for Quantities, Units and Symbols Part 0: General Principles | |
| Specifications for Quantities, Units and Symbols Part 12: Dimensionless Parameters | |
| Specifications for Quantities, Units and Symbols Part 13. Solid State Physics | |
| Steel strip intended for the manufacture of springs - Part 4: Specification for martensitic and austenitic stainless steel | |
| Steel Strip Intended for the Manufacture of Springs Part 2. Specification for Cold Rolled Carbon and Low Alloy Steel | |
| Steel strip intended for the manufacture of springs. Part 1: Specification for hot rolled carbon and low alloy steel | |
| Steel strip intended for the manufacture of springs. Part 3: Specification for pre-hardened and tempered carbon steel | |
| Structural use of steelwork in building - Part 3: Design in composite construction - Section 3.1 Code of practice for design of simple and continuous composite beams | |
| Structural use of steelwork in building - Part 7: Specification for materials and workmanship: cold formed sections | |
| Structural Use of Steelwork in Building Part 1: Code of Practice for Design in Simple and Continuous Construction: Hot Rolled Sections | |
| Structural use of steelwork in building Part 2. Specification for materials, fabrication and erection: hot rolled sections | |
| Structural Use of Steelwork in Building Part 3: Design in Composite Construction Section 3.1: Code of Practice for Design of Simple and Continuous Composite Beams | |
| Structural Use of Steelwork in Building Part 4: Code of Practice for Design of Floors with Profiled Steel Sheeting | |
| Structural Use of Steelwork in Building Part 5: Code of Practice for Design of Cold Formed Sections | |
| Structural Use of Steelwork in Building Part 6: Code of Practice for Design of Light Gauge Profiled Steel Sheeting | |
| Structural Use of Steelwork in Building Part 8: Code of Practice for Fire Resistant Design | |
| Structural Use of Steelwork in Building Part 9: Code of Practice for Stressed Skin Design | |
| Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 1: Guards, Including Foundation Units | |
| Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 3: Large Surface Boxes | |
| Surface Boxes and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 4: Preformed Chambers | |
| Surface Boxes, and Guards for Underground Stopvalves for Gas and Waterworks Purposes Part 2: Small Surface Boxes | |
| Temporary works Part 1: Management procedures for the control of temporary works \x96 Code of practice | |
| Temporary works Part 2: Falsework: Design and implementation \x96 Code of practice | |
| Terms and Symbols for Measurement of Fluid Flow in Closed Conduits | |
| Testing of Industrial Type Steam Turbines | |
| Thermal Insulation for Pitched Roof Spaces in Dwellings Part 1: Man-Made Mineral Fibre Thermal Insulation Mats | |
| Thermal Insulation for Pitched Roof Spaces in Dwellings Part 2: Man-Made Mineral Fibre Thermal Insulation in Pelleted or Granular Form for Application by Blowing | |
| Thermal Insulation for Pitched Roof Spaces in Dwellings Part 5: Installations of Man-Made Mineral Fibre and Cellulose Fibre Insulation | |
| Thermal insulation for use in pitched roof spaces in dwellings - Part 3: Specification for cellulose fibre thermal insulation for application by blowing | |
| Thermal insulation for use in pitched roof spaces in dwellings - Part 4: Methods for determining flammability and resistance to smouldering | |
| Toroidal Strip-Wound Cores Made of Magnetically Soft Material | |
| Tracked Changes (Redline) - BS 5839-9 Fire detection and fire alarm systems for buildings.Part 9: Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems... | |
| Tracked Changes (Redline) - Code of practice for ground investigations | |
| Tracked Changes (Redline) - Code of practice for temporary works procedures and the permissible stress design of falsework | |
| Tracked Changes (Redline) - Concrete pipes and ancillary concrete products.Part 6: Road gullies and gully cover slabs - Specification | |
| Tracked Changes (Redline) - Concrete pipes and ancillary concrete.Part 1: Unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) \x97 Specification... | |
| Tracked Changes (Redline) - Dry prepacked concrete - Specification | |
| Tracked Changes (Redline) - Fire detection and fire alarm systems for buildings \x97 Part 8: Design, installation, commissioning and maintenance of voice alarm systems \x96 Code of practice | |
| Tracked Changes (Redline) - Fire detection and fire alarm systems for buildings Part 1: Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises | |
| Tracked Changes (Redline) - Fire detection and fire alarm systems for buildings Part 6: Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm... | |
| Tracked Changes (Redline) - Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases) \x96 Specification | |
| Tracked Changes (Redline) - Planning, design, setting up and use of temporary suspended access equipment \x97 Code of practice | |
| Tracked Changes (Redline) - Railway rolling stock materials \x97 Part 3: Specification for monobloc wheels for traction and trailing stock | |
| Tracked Changes (Redline) - Railway rolling stock materials Part 1: Specification for axles for traction and trailing stock | |
| Tracked Changes (Redline) - Surface boxes, guards and underground chambers for the purposes of utilities Part 1: Specification for guards and plinths | |
| Trichloroethylene | |
| Underlays for Textile Floor Coverings | |
| Units for Expressing Properties of Paper, Board and Pulps | |
| Valve mating details for actuator operation Part 1: Specification for flange dimensions and characteristics | |
| Valve Mating Details for Actuator Operation Part 2: Specification for Couplings | |
| Variable Capacitors Part 1: Methods of Test | |
| What\x92s in the BS 5839-61 Fire Detection for Domestic Premises Technical Solution Pack, and how to access video content | |
| Wood stairs - Part 1: Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings | |
| Wood stairs - Part 2: Specification for performance requirements for domestic stairs constructed of wood-based materials |
| << Prev | Next >> |