Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
630
640
650
660
670
680
690
691
692
693
694
695
696
697
698
699
700
701
702
710
720
730
740
750
760
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Accessibility and usability of the built environment \x96 Conformity assessment | |
| Accessibility and usability of the built environment \x96 Technical performance criteria and specifications | |
| Acoustics \x96 Determination of airborne sound power levels emitted by machinery using vibration measurement \x96 Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009) | |
| Acoustics \x96 Determination of airborne sound power levels emitted by machinery using vibration measurement \x96 Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009) | |
| Adaptation to climate change \x96 Requirements and guidance on adaptation planning for local governments and communities (ISO/TS 14092:2020) | |
| Additive manufacturing \x96 Design \x96 Functionally graded additive manufacturing (ISO/ASTM/DTR 52912:2020) | |
| Additive manufacturing \x96 Feedstock materials \x96 Part 1: Guidelines for the selection of measurement methods for characterization of powder flow properties (ISO/ASTM DTR 52913-1:2025) | |
| Additive manufacturing \x96 Non-destructive testing \x96 Intentionally seeding flaws in metallic parts (ISO/ASTM/DTR 52912:2021) | |
| Additive Manufacturing \x96 Qualification principles \x96 Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment (ISO/ASTM/FDIS 52930:2021) | |
| Additive manufacturing \x96 Round robin testing \x96 General guidelines (ISO/ASTM PRF TR 52917:2002) | |
| Additive manufacturing for medical \x96 Data \x96 Optimized medical image data (ISO/ASTM DTR 52916:2021) | |
| Additive Manufacturing of metals \x96 Feedstock materials \x96 Correlating of rotating drum measurement with powder spreadability in PBF-LB machines (ISO/ASTM DTR 52952:2023) | |
| Additive manufacturing of metals \x96 Non-destructive testing and evaluation \x96 Defect detection in parts (ISO/ASTM DTR 52905:2023) | |
| Additive manufacturing of metals \x96 Qualification principles \x96 Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment (ISO/ASTM/DTS 52949:2024) | |
| Algae and algae products \x96 Food and feed applications: General overview of limits, procedures and analytical methods | |
| Algae and algae products \x96 Specifications for chemicals and biofuels sector applications | |
| Algae and algae products \x96 Specifications for cosmetic sector applications | |
| Algae and algae products \x96 Specifications for pharmaceutical sector applications | |
| Alloyed steels \x96 Determination of chromium content \x96 Inductively coupled plasma optical emission spectrometric method | |
| Ambient air \x96 Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse | |
| Ambient air \x96 Equivalence of automatic measurements of elemental carbon (EC) and organic carbon (OC) in PM | |
| Analysis of natural gas \x96 Biomethane \x96 Determination of amines content (ISO/TS 2610:2022) | |
| Animal and vegetable fats and oils \x96 Relative composition of oils and derivatives by capillary gas chromatography (fingerprint method) (ISO/DTS 22115:2020) | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis | |
| Applicability of CEN Standards to Qualified Electronic Seal Creation Device under the EU Regulation N\xb0910/2014 (eIDAS) | |
| Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines \x96 Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) | |
| Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines \x96 Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) | |
| Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines \x96 Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) | |
| Assistive products for tissue integrity when lying down \x96 Part 7: Foam properties, characteristics and performance (ISO/TR 20342-7:2021) | |
| Automotive fuels \x96 Diesel fuel market issues \x96 Abrasive particles investigation report | |
| Automotive fuels \x96 Information on aniline, aniline derivatives and secondary-butyl acetate when used as blending components in unleaded petrol | |
| Automotive fuels \x96 Paraffinic diesel fuel and blends with FAME \x96 Background to the parameters required and their respective limits and determination | |
| Automotive fuels \x96 Report on studies done on cold soak filter blocking tendency (CS-FBT) on fatty acid methyl ester (FAME) as blend component for diesel fuel, and of diesel fuel... | |
| Basic human body measurements for technological design \x96 Part 2: Statistical summaries of body measurements from national populations (ISO/DTR 7250-2:2023) | |
| Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series (ISO/TR 11594:2022) | |
| BIM in infrastructure \x96 Standardization need and recommendations | |
| Bio-based products \x96 Examples of reporting on sustainability criteria | |
| Bio-based products- Use of stable isotope ratios of Carbon, Hydrogen, Oxygen and Nitrogen as tools for verification of the origin of bio-based feedstock and characteristics of production processes \x96 overview... | |
| Biodegradable plastics \x96 Status of standardization and new prospects | |
| Bitumen and bituminous binders \x96 Sustainability \x96 Review on how to address environmental information | |
| Bituminous mixtures \x96 Test methods \x96 Part 51: Surface shear strength test | |
| Bituminous mixtures \x96 Test methods \x96 Part 52: Conditioning to address oxidative ageing | |
| Building automation, controls and building management \x96 Smart Building \x96 Description and Aspects | |
| Building information modelling \x96 Digital twins applied to the built environment \x96 Use cases | |
| Building products \x96 Treatment of acoustics in product technical specifications | |
| Cabin air quality on civil aircraft \x96 Chemical compounds | |
| Calibration and accuracy of non-catching precipitation measurement instruments | |
| Carbonation and CO2 uptake in concrete | |
| Cement \x96 Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance | |
| Cereals (wheat and barley) \x96 Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy | |
| Cereals and cereal products \x96 Sampling studies (ISO/DTR 29263:2021) | |
| Characterization of waste \x96 Guidance on the use of ecotoxicity tests applied to waste | |
| Chemical disinfectants and antiseptics \x96 Differentiation of active and non-active substances | |
| Chemical disinfectants and antiseptics \x96 Information on the preparation of spores and determination/exclus ion of sporistatical activity | |
| Chemical disinfectants and antiseptics \x96 Interpretation of water controls in EN 16615:2015 | |
| Child care articles \x96 Compiled interpretations of CEN/TC 252 standards | |
| Child care articles \x96 General safety guidelines \x96 Part 1: Safety philosophy and safety assessment | |
| Child care articles \x96 General safety guidelines \x96 Part 2: Chemical hazards | |
| Child care articles \x96 General safety guidelines \x96 Part 3: Mechanical hazards | |
| Child care articles \x96 General safety guidelines \x96 Part 4: Thermal hazards | |
| Child care articles \x96 General safety guidelines \x96 Part 5: Product information | |
| Classification of thermoregulatory properties | |
| Collection of rationales for EN 1176 \x96 Requirements | |
| Communication system for meters \x96 Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information | |
| Connection between the contributions of civil engineering works to sustainability and achievement of the Sustainable Development Goals (ISO/DTR 7016:2025) | |
| Construction products \x96 Assessment of release of dangerous substances \x96 Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH | |
| Construction products \x96 Assessment of release of dangerous substances \x96 Part 1: Guidance for the determination of leaching tests and additional testing steps | |
| Construction products: Assessment of release of dangerous substances \x96 Guidance for a broader application of the CEN/TC 351 reference room | |
| Continuous handling equipment and systems \x96 Safety requirements for equipment for mechanical handling of unit loads \x96 Interpretations relating to EN 619:2022 | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 1: Standardization landscape and releases (ISO/DTR 21186-1:2020) | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 2: Hybrid communications (ISO/DTR 21186-2:2020) | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 3: Security (ISO/DTR 21186-3:2020) | |
| Cooperative intelligent transport systems (C-ITS) \x96 Position, velocity and time functionality in the ITS station (ISO/DTS 21176:2020) | |
| Copper and copper alloys \x96 Compendium of compositions and products | |
| Crime prevention through building design, urban planning and city maintenance \x96 Principles and process | |
| Cycles \x96 Components and assemblies used in bicycles \x96 Innovative requirements and test methods | |
| Data governance and quality for AI within the European context | |
| Data Sheets \x96 Footwear Tests Materials and Test Adhesives | |
| Dentistry \x96 Guidance on the classification of dental devices and accessories | |
| Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution \x96 Test method based on O2-consumption Lubricants \x96 study report | |
| Digital Information Interchange in the Insurance Industry \x96 Part 2: Implementation of EN 17419-1 in Open API 3.0 specification | |
| Documents relevant to EN 301 549 (V1.1.1) "Accessibility requirements suitable for public procurement of ICT products and services in Europe" | |
| Ductile iron pipes, fittings, accessories and their joints for sewerage applications \x96 Guidelines for Pipelines Installation | |
| Durability of wood and wood-based products \x96 Interpretation document for standards related to efficacy requirements and specifications of wood preservatives | |
| Durability of wood and wood-based products \x96 Moisture dynamics of wood and wood-based products | |
| Durability of wood and wood-based products \x96 Remedial treatment of wood against insects by injection | |
| e-Competence Framework (e-CF) \x96 A common European Framework for ICT Professionals in all sectors \x96 Part 2: User Guide | |
| e-Competence Framework (e-CF) \x96 A common European Framework for ICT Professionals in all sectors \x96 Part 3: Methodology | |
| e-Competence Framework (e-CF) \x96 A common European Framework for ICT Professionals in all sectors \x96 Part 4: Case Studies | |
| e-Competence performance indicators and common metrics | |
| Electronic cigarettes and e-liquids \x96 Constituents to be measured in the aerosol of vaping products | |
| Electronic cigarettes and e-liquids \x96 Terms and definitions | |
| Electronic fee collection \x96 Charging performance framework (ISO/DTS 37444:2022) | |
| Electronic fee collection \x96 EETS gap analysis and proposed standards roadmap | |
| Electronic fee collection \x96 Personalization of on-board equipment (OBE) \x96 Part 2: Using dedicated short-range communication (ISO/PRF TS 21719-2:2022) | |
| Electronic fee collection \x96 Personalization of on-board equipment \x96 Part 3: Using integrated circuit(s) cards (ISO/DTS 21719-3:2021) | |
| Electronic fee collection \x96 Pre-study on the use of vehicle licence plate information and automatic number plate recognition (ANPR) technologies (ISO/PRF TR 6026:2022) | |
| Electronic fee collection \x96 Secure monitoring for autonomous toll systems \x96 Part 1: Compliance checking | |
| Electronic fee collection \x96 Secure monitoring for autonomous toll systems \x96 Part 2: Trusted recorder | |
| Electronic fee collection \x96 System architecture for vehicle-related tolling \x96 Part 3: Data dictionary (ISO/PRF TS 17573-3:2021) | |
| Electronic invoicing \x96 Part 10: Additional requirements to extend to B2B | |
| Electronic invoicing \x96 Part 3-3: Syntax binding for UN/CEFACT XML Industry Invoice D16B | |
| Electronic invoicing \x96 Part 9: VAT reporting and gap analysis with current e-invoicing standardization deliverables | |
| Electronic public procurement \x96 Business interoperability interfaces (BII), e-Fulfillment \x96 Part 101: Overview | |
| Electronic public procurement \x96 Business interoperability interfaces (BII), e-Ordering \x96 Part 101: Overview | |
| Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures | |
| Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2: Certificate profile for certificates issued to natural persons | |
| Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 3: Certificate profile for certificates issued to legal persons | |
| Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 4: Certificate profile for web site certificates | |
| Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 5: QCStatements | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 1: Framework and Architecture | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 2: Semantic contents | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 3: Formats | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings; Sub-part 1: Message delivery bindings | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings; Sub-part 2: Evidence and identification bindings | |
| Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings; Sub-part 3: Capability/requireme nts bindings | |
| Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Electronic Registered Delivery Service Providers | |
| Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Registered Electronic Mail Service Providers | |
| Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates; Part 1: General requirements | |
| Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates; Part 2: Requirements for trust service providers issuing EU qualified certificates | |
| Electronic Signatures and Infrastructures (ESI); Policy and Security Requirements for Trust Service Providers issuing Time-Stamps | |
| Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 1: Framework and architecture | |
| Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 2: Semantic contents | |
| Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 3: Formats | |
| Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 4: Interoperability profiles | |
| Electronic Signatures and Infrastructures (ESI); Trust Service Provider Conformity Assessment; Part 1: Requirements for conformity assessment bodies assessing Trust Service Providers | |
| Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data structures | |
| Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 2: Certificate profile for certificates issued to natural persons | |
| Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 4: Certificate profile for web site certificates | |
| Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 5: QCStatements | |
| Electronic Signatures and Trust Infrastructures (ESI); General Policy Requirements for Trust Service Providers | |
| Electronic Signatures and Trust Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates; Part 1: General requirements | |
| Electronic Signatures and Trust Infrastructures (ESI); Policy and security requirements for Trust Service Providers issuing certificates; Part 2: Requirements for trust service providers issuing EU qualified certificates | |
| Energy Performance of Buildings - Basic Principles for the set of EPBD standards | |
| Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards | |
| Energy performance of buildings \x96 Building automation, controls and building management \x96 Part 2: Explanation and justification of ISO 52127-1 (ISO/DTR 52127-2:2020) | |
| Energy performance of buildings \x96 Contribution of building automation, controls and building management \x96 Part 2: Explanation and justification of ISO 52120-1 (ISO/DTR 52120-2:2020) | |
| Energy performance of buildings \x96 Controls for heating systems \x96 Part 6: Accompanying TR EN 12098-1:2022 \x96 Modules M3-5,6,7,8 | |
| Energy performance of buildings \x96 Controls for heating systems \x96 Part 7: Accompanying TR EN 12098-3:2022 \x96 Modules M3-5,6,7,8 | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads \x96 Part 2: Explanation and justification of ISO 52016-1 and ISO... | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads \x96 Part 4: Explanation and justification of ISO 52016-3 (ISO/DTR 52016-4:2024)... | |
| Energy performance of buildings \x96 Hygrothermal performance of building components and building elements \x96 Part 2: Explanation and justification (ISO/DTR 52019-2:2016) | |
| Energy performance of buildings \x96 Indicators for partial EPB requirements related to thermal energy balance and fabric features \x96 Part 2: Explanation and justification of ISO 52018-1 (ISO/DTR 52018-2:2016) | |
| Energy performance of buildings \x96 Thermal, solar and daylight properties of building components and elements \x96 Part 2: Explanation and justification (ISO/DTR 52022-2:2016) | |
| Energy performance of buildings \x96 Ventilation for buildings \x96 Part 2: Interpretation of the requirements in EN 16798-1 \x96 Indoor environmental input parameters for design and assessment of energy performance... | |
| Environmentally sustainable Artificial Intelligence | |
| Ergonomic design of control centres \x96 Part 10: Introduction to the control room design series of standards (ISO/TR 11064-10:2020) | |
| Ergonomics \x96 Demands and Availability of anthropometric and strength data of children in Europe | |
| Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/DTR 22411:2020) | |
| Ergonomics of human-system interaction \x96 Part 100: Overview of ISO 9241 software ergonomic standards (ISO/DTR 9241-100:2022) | |
| Ergonomics of human-system interaction \x96 Part 126: Guidance on the presentation of auditory information (ISO/TS 9241-126:2019) | |
| Ergonomics of human-system interaction \x96 Part 311: Application of ISO 9241-307: LCD screens for workstations (ISO/TR 9241-311:2022) | |
| Ergonomics of human-system interaction \x96 Part 312: Readability of electrophoretic displays (ISO/TR 9241-312:2020) | |
| Ergonomics of human-system interaction \x96 Part 393: Structured literature review of visually induced motion sickness during watching electronic images (ISO/TR 9241-393:2020) | |
| Ergonomics of human-system interaction \x96 Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress (ISO/TS 9241-430:2021) | |
| Ergonomics of human-system interaction \x96 Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series (ISO/TR 9241-514:2020) | |
| Ergonomics of human-system interaction \x96 Part 810: Robotic, intelligent and autonomous systems (ISO/TR 9241-810:2020) | |
| Eurocode 1: Actions on Structures \x96 Traffic Loads on Bridges \x96 Track-Bridge Interaction | |
| European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products | |
| European Digital Identity Wallets standards Gap Analysis | |
| Evaluating the performance of continuous air monitors \x96 Part 1: Air monitors based on accumulation sampling techniques (ISO/TR 22930-1:2020) | |
| Evaluating the performance of continuous air monitors \x96 Part 2: Air monitors based on flow-through sampling techniques without accumulation (ISO/TR 22930-2:2020) | |
| Execution of steel structures and aluminium structures \x96 Reuse of structural steel | |
| Facility management \x96 Existing performance management in facility management organizations \x96 State of the industry (ISO/TR 41030:2024) | |
| Facility management \x96 Overview of available technologies (ISO/DTR 41016:2023) | |
| Facility management \x96 Scope, key concepts and benefits (ISO/TR 41013:2017) | |
| Facility management\x92s role in sustainability, resilience and adaptability (ISO/DTR 41019:2024) | |
| Fasteners \x96 Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019) | |
| Fertilizers \x96 Crushing strength determination on fertilizers grains | |
| Fertilizers \x96 Determination of dust content | |
| Fire safety engineering in Europe \x96 Review of national requirements and application | |
| Flanges and their joints \x96 Design rules for gasketed circular flange connections \x96 Part 2: Gasket parameters | |
| Flanges and their joints \x96 Design rules for gasketed circular flange connections \x96 Part 6: Background information | |
| Foundational Body of Knowledge for the ICT Profession (ICT BoK) \x96 Part 2: User Guide and Methodology | |
| Framework and Implementation of Common Data Environment Solutions, in accordance with EN ISO 19650 | |
| Fuels and biofuels \x96 Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME) | |
| Furniture \x96 Classification for properties for furniture surfaces | |
| Furniture \x96 Common test equipment \x96 Test foams and mattresses | |
| Further guidance on the application of EN 13791:2019 and background to the provisions | |
| Gas Infrastructure \x96 CEN/TC 234 Pressure Definitions \x96 Guideline Document | |
| Gas infrastructure \x96 Consequences of hydrogen in the gas infrastructure and identification of related standardisation need in the scope of CEN/TC 234 | |
| Gas infrastructure \x96 Pipelines for maximum operating pressure up to and including 16 bar \x96 Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) | |
| Gas welding equipment \x96 Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes | |
| Gas-fired central heating boilers \x96 Part 3-1: H2NG and ACCF \x96 Expansion of EN 15502-2-1:2022 | |
| Geographic information \x96 Classification systems \x96 Part 3: Land Use Meta Language (LUML) (ISO/DTS 19144-3:2024) | |
| Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/DTS 8062-2:2010) | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/DTS 14253-4:2009) | |
| Geotechnical investigation and testing \x96 Qualification criteria and assessment \x96 Part 1: Qualified technician and qualified operator (ISO/PRF TS 24283-1:2021) | |
| Geotechnical investigation and testing \x96 Qualification criteria and assessment \x96 Part 2: Responsible expert (ISO/DTS 24283-2:2021) | |
| Geotechnical investigation and testing \x96 Qualification criteria and assessment \x96 Part 3: Qualified enterprise (ISO/PRF TS 24283-3:2021) | |
| Guidance for selection, use, care and maintenance of protective clothing against heat and flame | |
| Guidance for understanding and utilize EN/ISO 29481-1 Building information models \x96 Information delivery manual \x96 Part 1: Methodology and format | |
| Guidance on data bases for human vibration | |
| Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO/DTS 21805:2018) | |
| Guidance on how to implement EN ISO 19650-1 and -2 in Europe | |
| Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface (ISO/TS 16901:2022) | |
| Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances | |
| Guidance on the relationship between EN ISO 13485: 2016 (Medical devices \x96 Quality management systems \x96 Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical... | |
| Guideline for the implementation of BIM Execution Plans (BEP) and Exchange Information Requirements (EIR) on European level based on EN ISO 19650-1 and -2 | |
| Guideline for the validation of physico-chemical analytical methods | |
| Guidelines for selection, use, care and maintenance of protective clothing against foul weather, wind and cold | |
| Guidelines for selection, use, care and maintenance of smart garments protecting against heat and flame | |
| Guidelines for the preparation of standard routine methods with wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/DTS 23758:2021) | |
| Guidelines for water safety plan concept in buildings | |
| Hand protection \x96 Guidance for selection and use (ISO/DTR 8546:2022) | |
| Health informatics \x96 Business requirements for a syntax to exchange structured dose information for medicinal products (ISO/DTS 17251:2022) | |
| Health informatics \x96 Classification of purposes for processing personal health information (ISO/DTS 14265:2023) | |
| Health informatics \x96 Identification of medicinal products \x96 Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms,... | |
| Health informatics \x96 Identification of medicinal products \x96 Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017)... | |
| Health informatics \x96 Identification of medicinal products \x96 Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017)... | |
| Health Informatics \x96 Requirements for a knowledge base for clinical decision support systems to be used in medication-related processes (ISO/DTS 22756:2020) | |
| Health informatics \x96 Requirements for international machine-readable coding of medicinal product package identifiers (ISO/DTS 16791:2020) | |
| Health informatics \x96 Requirements for medication safety alerts (ISO/PRF TS 22703:2021) | |
| Health software \x96 Part 2: Health and wellness apps \x96 Quality and reliability (ISO/DTS 82304-2:2021) | |
| High chairs and learning towers \x96 Compiled interpretations of CEN/TC 364 standards | |
| Hydrometry \x96 On-site measurement of snow depth and depth of snowfall | |
| ICT accessibility competences \x96 Guidelines for a more inclusive ICT development | |
| In vitro diagnostic test systems \x96 Requirements and recommendations for detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by nucleic acid amplification methods (ISO/TS 5798:2022) | |
| Information security, cybersecurity and privacy protection \x96 Requirements for the competence of IT security testing and evaluation laboratories \x96 Part 1: Evaluation for ISO/IEC 15408 (ISO/IEC/TS 23532-1:2021) | |
| Information security, cybersecurity and privacy protection \x96 Requirements for the competence of IT security testing and evaluation laboratories \x96 Part 2: Testing for ISO/IEC 19790 (ISO/IEC/TS 23532-2:2021) | |
| Information technology \x96 Artificial intelligence \x96 Treatment of unwanted bias in classification and regression machine learning tasks (ISO/IEC DTS 12791:2024) | |
| Installation of thermal energy meters \x96 Guidelines for the selection, installation and operation of thermal energy meters | |
| Intelligent transport systems \x96 Cooperative ITS \x96 Dictionary of in-vehicle information (IVI) data structures (ISO/DTS 19321:2020) | |
| Intelligent transport systems \x96 Cooperative ITS \x96 Using V2I and I2V communications for applications related to signalized intersections (ISO/PRF TS 19091:2019) | |
| Intelligent transport systems \x96 Data interfaces between centres for transport information and control systems \x96 Platform independent model specifications for data exchange protocols for transport information and control systems (ISO/PRF... | |
| Intelligent transport systems \x96 Data interfaces between centres for transport information and control systems \x96 Platform-independent model specifications for data exchange protocols for transport information and control systems (ISO/DTS 19468:2021)... | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 10: Energy infrastructure publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 11: Publication of machine interpretable traffic regulations | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 12: Facility related publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 13: Status, fault and quality requirements | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 6: Parking publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 8: Traffic management publications and extensions dedicated to the urban environment | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 9: Traffic signal management publications dedicated to the urban environment | |
| Intelligent transport systems \x96 Dynamic data and map database specification for connected and automated driving system applications \x96 Part 2: Logical data model of dynamic data (ISO/DTS 22726-2:2024) | |
| Intelligent transport systems \x96 eSafety \x96 Part 1: Extending eCall to other categories of vehicle | |
| Intelligent transport systems \x96 ITS station security services for secure session establishment and authentication between trusted devices (ISO/DTS 21177:2019) | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 1: Vocabulary (ISO/DTS 24315-1:2024) | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 2: Operational concepts (ConOps) (ISO/DTR 24315-2:2025) | |
| Intelligent transport systems \x96 Management of electronic traffic regulations (METR) \x96 Part 3: System of systems requirements and architecture (SoSR) (ISO/DTS 24315-3:2025) | |
| Intelligent transport systems \x96 Urban-ITS \x96 Mixed vendor environment guide | |
| Intellligent transport systems \x96 Data interfaces between centres for transport information and control \x96 Part 4: Data interfaces between centres for intelligent transport systems (ITS) using XML (Profile B) (ISO/PRF... | |
| Iron and steel \x96 European standards for the determination of chemical composition | |
| Layer model of Quantum Computing | |
| Light and lighting \x96 Building information modelling properties for lighting \x96 Lighting systems (ISO/TS 7127:2023) | |
| Lighting applications \x96 Tunnel lighting | |
| Liquid chromatography at critical conditions (LCCC) \x96 Chemical heterogeneity of polyethylene oxides (ISO/TS 23973:2020) | |
| LPG equipment and accessories \x96 Environmental and climate change considerations for CEN/TC 286 standards | |
| LPG equipment and accessories \x96 Terminology | |
| Masonry cement \x96 Testing for workability (cohesivity) | |
| Materials obtained from End-of-Life Tyres \x96 Granulated rubber \x96 Determination of textile fiber content by visual index (qualitative method) | |
| Measurement of radioactivity in the environment \x96 Air: radon 222 \x96 Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method (ISO/TS 11665-12:2018) | |
| Measurement of the coating properties of non-oriented electrical steel | |
| Mechanical products - Methodology for optimising environmental impacts in product design and development | |
| Mechanical products \x96 Order of magnitude of key environmental data | |
| Mechanical vibration \x96 Guide to the health effects of vibration on the human body | |
| Mechanical vibration \x96 Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery | |
| Medical devices \x96 Guidance on the application of ISO 14971 (ISO/DTR 24971:2020) | |
| Medical devices \x96 Post-market surveillance for manufacturers (ISO/DTR 20416:2020) | |
| Metallic materials \x96 Tensile testing \x96 Part 5: Specification for testing miniaturised test pieces (ISO/DTS 6892-5:2024) | |
| Method for the determination of C3A in the clinker from cement analysis | |
| Methods of determination of the mechanical properties of self-bonding coating assemblies related to non-oriented electrical steels | |
| Multilayer piping systems for hot and cold water installations inside buildings \x96 Part 7: Guidance for the assessment of conformity (ISO/DTS 21003-7:2018) | |
| Nanomaterials \x96 Quantification of nano-object release from powders by generation of aerosols (ISO/DTS 12025:2020) | |
| Nanotechnologies \x96 Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation (ISO/TS 21362:2018) | |
| Nanotechnologies \x96 Characterization of nano-objects using single particle inductively coupled plasma mass spectrometry (ISO/DTS 19590:2024) | |
| Nanotechnologies \x96 Chemical characterization of graphene-related two-dimensional materials from powders and liquid dispersions (ISO/DTS 23359:2025) | |
| Nanotechnologies \x96 Evaluation of the mean size of nano-objects in liquid dispersions by static multiple light scattering (SMLS) (ISO/TS 21357:2022) | |
| Nanotechnologies \x96 Guidance on the measurement of nanoparticle number concentration (ISO/TS 24672:2023) | |
| Nanotechnologies \x96 Lung burden mass measurement of nanomaterials for inhalation toxicity tests (ISO/TS 5387:2023) | |
| Nanotechnologies \x96 Magnetic nanomaterials \x96 Part 1: Specification of characteristics and measurements for magnetic nanosuspensions (ISO/TS 19807-1:2019) | |
| Nanotechnologies \x96 Magnetic nanomaterials \x96 Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021) | |
| Nanotechnologies \x96 Plain language explanation of selected terms from the ISO/IEC 80004 series (ISO/TR 18401:2017) | |
| Nanotechnologies \x96 Requirements and recommendations for the identification of measurands that characterise nano-objects and materials that contain them (ISO/TS 23302:2021) | |
| Nanotechnologies \x96 Structural characterization of graphene \x96 Part 1: Graphene from powders and dispersions (ISO/TS 21356-1:2021) | |
| Nanotechnologies \x96 Vocabulary \x96 Liposomes (ISO/TS 4958:2024) | |
| Nanotechnologies \x96 Vocabulary \x96 Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017) | |
| Nanotechnologies \x96 Vocabulary \x96 Part 13: Graphene and other two-dimensional (2D) materials (ISO/DTS 80004-13:2024) | |
| Nanotechnologies \x96 Vocabulary \x96 Part 6: Nano-object characterization (ISO/DTS 80004-6:2020) | |
| Nanotechnologies \x96 Vocabulary \x96 Part 8: Nanomanufacturing processes (ISO/DTS 80004-8:2020) | |
| Natural gas fuelling stations \x96 Guidance for implementation of European standards on CNG and LNG stations for fuelling vehicles | |
| Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application | |
| Non-destructive testing \x96 NDT personnel training organizations (ISO/PRF TS 25108:2018) | |
| Non-destructive testing \x96 NDT training syllabuses (ISO/DTS 25107:2019) | |
| Nuclear sector \x96 Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS) (ISO/TS 23406:2020) | |
| One Post Equipment \x96 Inspection Guidance | |
| Optimal design of hydrometric networks | |
| Packaging \x96 Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment \x96 Part 2: Requirements for measuring... | |
| Packaging for terminally sterilized medical devices \x96 Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/DTS 16775:2021) | |
| Paints and varnishes \x96 Adhesion of coatings (ISO/TR 19402:2018) | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of film extensibility by indentation of a coating on a wooden substrate | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 1: Minimum requirements and weathering (ISO/TS 19392-1:2018) | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 2: Determination and evaluation of resistance to rain erosion using rotating arm (ISO/TS 19392-2:2018) | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 3: Determination and evaluation of resistance to rain erosion using water jet (ISO/TS 19392-3:2018) | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023) | |
| Paints and varnishes \x96 Coating systems for wind-turbine rotor blades \x96 Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023) | |
| Paints and varnishes \x96 Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019) | |
| Personal identification \x96 Biometrics \x96 Overview of biometric verification systems implemented across Europe | |
| Personal identification \x96 Usage of biometrics in breeder documents | |
| Personal protective equipment \x96 Smart garments \x96 Terms and Definitions | |
| Petroleum and natural gas industries \x96 Arctic operations \x96 Material requirements for arctic operations (ISO/TS 35105:2018) | |
| Petroleum and natural gas industries \x96 Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2018) | |
| Petroleum products \x96 Guidelines for good housekeeping \x96 Part 1: Automotive diesel fuels | |
| Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/DTS 17969:2015) | |
| Petroleum, petrochemical and natural gas industries \x96 Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021) | |
| Plastic piping systems \x96 Structural design of buried thermoplastics piping systems \x96 Procedure and guidance under various conditions of loading | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polyethylene (PE) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polypropylene (PP) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics \x96 Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/DTR 18486:2018) | |
| Plastics \x96 Recycled plastics \x96 Sampling procedures for testing plastics waste and recyclates | |
| Plastics in the Environment \x96 Current state of knowledge and methodologies (ISO/DTR 21960:2019) | |
| Plastics pipes and fittings \x96 Utilisation of thermoplastics recyclates \x96 Part 2: Recommendations for relevant characteristics | |
| Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure \x96 Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) \x96 Guidance for the assessment of conformity... | |
| Plastics piping systems for hot and cold water installations \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 7: Guidance for the assessment of conformity (ISO/PRF TS 15877-7:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 7: Guidance for the assessment of conformity (ISO/PRF TS 15875-7:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Polybutylene (PB) \x96 Part 7: Guidance for the assessment of conformity (ISO/PRF TS 15876-7:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Polyethylene of raised temperature resistance (PE-RT) \x96 Part 7: Guidance for the assessment of conformity (ISO/PRF TS 22391-7:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 7: Guidance for the assessment of conformity (ISO/PRF TS 15874-7:2018) | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 4: Guidance for the assessment... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 3: Guidance for assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Acrylonitrile-butadi ene-styrene (ABS) \x96 Part 2: Assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 2: Assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for the assessment of conformity... | |
| Plastics piping systems for the supply of gaseous fuels \x96 Polyethylene (PE) \x96 Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 7: Assessment of conformity (ISO/DTS 16486-7:2023) | |
| Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity | |
| Plastics recycling \x96 Classification of plastic recyclates as postconsumer recyclates (PCR) and postindustrial recyclates (PIR) | |
| Plastics welding supervisor \x96 Task, responsibilities, knowledge, skills and competence | |
| Playground equipment for children \x96 Part 1: Replies to requests for interpretation of EN 1176:2017 and its parts (2018-2019) | |
| Playground equipment for children \x96 Replies to requests for interpretation of EN 1176 and its parts. | |
| Playground equipment for children \xad Part 2: Replies to requests for interpretation of EN 1176:2017 and its parts (2020 -\xad 2022) | |
| Postal services \x96 Automatic identification of items \x96 Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks | |
| Postal services \x96 DPM infrastructure \x96 Messages supporting DPM applications | |
| Postal services \x96 Safe, secured and contactless delivery of postal items | |
| Postal services \x96 Transit time measurement for cross border postal items using real mail feasibility study | |
| Potentially explosive atmospheres \x96 Explosion prevention and protection \x96 Guidance on inerting for the prevention of explosions | |
| Preparation of steel substrates before application of paints and related products \x96 Collected information on the effect of levels of water-soluble salt contamination (ISO/TR 15235:2001) | |
| Proposed limit values for contaminants in biomethane based on health assessment criteria | |
| Public transport \x96 Communication between contactless readers and fare media \x96 Part 1: Implementation requirements for ISO/IEC 14443 | |
| Public transport \x96 Communication between contactless readers and fare media \x96 Part 2: Test plan for ISO/IEC 14443 | |
| Public transport \x96 Distribution APIs for MaaS | |
| Public transport \x96 Interoperable fare management system \x96 Bluetooth low energy ticketing use cases and guidelines | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 1: Public transport network topology exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 2: Public transport scheduled timetables exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 3: Public transport fares exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 4: Passenger Information European Profile | |
| Public transport \x96 Network and timetable exchange (NeTEx) \x96 Part 5: Alternative modes exchange format | |
| Public transport \x96 Network and timetable exchange (NeTEx) \x96 Part 6 European Accessibility Profile | |
| Public transport \x96 Operating raw data and statistics exchange | |
| Public transport \x96 Reference data model \x96 Part 9: Informative documentation | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 10: Location service | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 11: Vehicle platform interface service | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 7: System and network architecture | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 9: Time service | |
| Public transport \x96 Service interface for real-time information relating to public transport operations \x96 Part 4: Functional service interfaces: Facility monitoring | |
| Public transport \x96 Service interface for real-time information relating to public transport operations \x96 Part 5: Functional service interfaces situation exchange: Situation exchange | |
| Quality management systems \x96 Guidance for the application of ISO 19443:2018 (ISO/TR 4450:2020) | |
| Quantifying irradiance for eye-mediated non-image-forming effects of light in humans | |
| Radiological protection \x96 Characteristics of reference pulsed radiation \x96 Part 1: Photon radiation (ISO/TS 18090-1:2015) | |
| Railway applications \x96 Aerodynamics \x96 Part 7: Fundamentals for test procedures for train-induced ballast projection | |
| Railway applications \x96 Axle design method | |
| Railway applications \x96 Braking \x96 Calculations for the estimation of stopping distance for specific Wheel Slide Protection testing | |
| Railway applications \x96 Fire protection on railway vehicles \x96 Assessment of fire containment and control systems for railway vehicles | |
| Railway applications \x96 Gauges \x96 Part 5: Background, explanation and worked examples | |
| Railway applications \x96 Guidance for the use of simulations \x96 Guidance for the use of simulations to demonstrate compliance with technical and regulatory requirements and on the introduction and development... | |
| Railway applications \x96 Infrastructure \x96 Determination of laboratory test parameters for assessing the mechanical durability of rail fastening systems \x96 Complementary element | |
| Railway applications \x96 Infrastructure \x96 Rail mounted railway maintenance and inspection machines and associated equipment \x96 Explanation of machine type and compliance, including acceptance processes | |
| Railway applications \x96 Railway rolling stock \x96 Investigation of vehicles position on the reserve curve tracks during running and calculation of buffer overlap | |
| Railway applications \x96 Vehicle end design for trams and light rail vehicles with respect to pedestrian safety | |
| Railway applications \x96 Vehicle Maintenance \x96 Guide for identification and management of Safety Critical Components for railway vehicles | |
| Railway applications \x96 Vehicle Maintenance \x96 Maintenance File | |
| Railway Applications \x96 Wheel-rail contact geometry parameters \x96 Technical report and background information about EN 15302 | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 1-2: Equipment and Application \x96 Top of Rail materials | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 1-3: Equipment and Application \x96 Adhesion materials | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 2-2: Properties and Characteristics \x96 Top of Rail materials | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 2-3: Properties and Characteristics \x96 Adhesion materials | |
| Railway applications \x96 Wheelsets and bogies \x96 Part 2: Design method for axles with internal journals | |
| Rationalized structure for electronic signature standardization \x96 Best practices for SMEs | |
| Rationalized structure for electronic signature standardization \x96 Guidelines for citizens | |
| Requirements for Conformity Assessment Bodies certifying Cloud Services | |
| Requirements for electronic advanced data (EDA) in postal operations, in particular compliant to security and customs requirements | |
| Requirements to connect, access, participate and further develop open global networks and systems, for postal operators and the wider postal sector players | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x96 Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR) | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 1: Determination of the yield point (ISO/TR 20659-1:2024) | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 2: Determination of the time-dependent structural change (thixotropy) (ISO/TR 20659-2:2024) | |
| Road infrastructure \x96 Automated vehicle interactions \x96 Reference Framework Release 1 | |
| Road restraint systems \x96 General requirements for the competence of laboratories performing virtual testing for the evaluation of vehicle restraint systems | |
| Road restraint systems \x96 Part 7: Performance characterisation and test methods for terminals of safety barriers | |
| Road restraint systems \x96 Part 9: Impact tests and test methods for removable barrier sections | |
| Road restraint systems \x96 Truck Mounted Attenuators \x96 Performance classes, impact test acceptance criteria and test performance | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 8: Variable-reach tractors | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels \x96 Guidance on hydrogen specific aspects | |
| Safety of amusement rides and amusement devices \x96 Replies to requests for interpretation of EN 13814:2019 and its parts | |
| Safety of escalators and moving walks \x96 Part 4: Interpretations related to EN 115 family of standards | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/DTR 22100-1:2020) | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects (ISO/TR 22100-4:2018) | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 5: Implications of artificial intelligence machine learning (ISO/TR 22100-5:2021) | |
| Safety of toys - Part 8: Age determination guidelines (ISO/DTR 8124-8:2015) | |
| Safety of toys \x96 Interpretations \x96 Part 1: Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14 | |
| Safety of toys \x96 Interpretations \x96 Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series | |
| Safety of toys \x96 Mechanical and physical properties \x96 Guidance on categorisation of projectile toys within EN 71-1 | |
| Safety of toys \x96 Migration of certain elements from polymers | |
| Safety of toys \x96 National translations of warnings and instructions for use in the EN 71 series | |
| Sanitary appliances \x96 Drainage systems for the application of sanitary appliances | |
| Screening test for the presence of nickel in articles which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with... | |
| Service Interface for Real time Information (SIRI) \x96 Part 6 Control Action | |
| Service Interface for Real Time Information (SIRI) \x96 Part 7: Passenger Real-Time Information European Profile | |
| Service Modelling Language, V1.4 | |
| Sludge recovery, recycling, treatment and disposal \x96 Information on the processes and technologies for inorganic substance and nutrient recovery (ISO/TR 22707:2023) | |
| Small craft \x96 Lithium-ion batteries (ISO/TS 23625:2021) | |
| Smoke and heat control systems \x96 Part 11: Horizontal flow powered ventilation systems for enclosed car parks | |
| Soil quality \x96 Determination of soil microbial diversity \x96 Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/DTS 29843-2:2021) | |
| Solid biofuels \x96 Determination of off-gassing and oxygen depletion characteristics \x96 Part 1: Laboratory method for the determination of off-gassing and oxygen depletion using closed containers (ISO/TS 20048-1:2020) | |
| Solid biofuels \x96 Determination of self-heating of pelletized biofuels \x96 Part 2: Basket heating tests (ISO/TS 20049-2:2020) | |
| Solid recovered fuels \x96 Determination of self-heating \x96 Part 2: Basket heating tests (ISO/DTS 21911-2:2022) | |
| Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials (ISO/TR 5602:2021) | |
| Space \x96 SBAS receivers performances for maritime applications \x96 MARESS Test report | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport System (ITS) \x96 Mathematical PVT error model | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport System (ITS) \x96 Security attacks modelling and definition of performance features and metrics related to security | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport System (ITS) \x96 Specification of the test facilities, definition of test scenarios, description and validation of the procedures for field... | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) \x96 Field tests definition for basic performance | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) \x96 Metrics and Performance levels detailed definition | |
| Space engineering \x96 Adhesive bonding handbook | |
| Space engineering \x96 Agile software development handbook | |
| Space engineering \x96 Control performance guidelines | |
| Space engineering \x96 Electromagnetic compatibility handbook | |
| Space engineering \x96 Guidelines for electrical design and interface requirements for power supply | |
| Space engineering \x96 Insert design handbook | |
| Space engineering \x96 Structural materials handbook \x96 Part 1: Overview and material properties and applications | |
| Space engineering \x96 Structural materials handbook \x96 Part 3: Load transfer and design of joints and design of structures | |
| Space engineering \x96 Structural materials handbook \x96 Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints | |
| Space engineering \x96 Structural materials handbook \x96 Part 7: Thermal and environmental integrity, manufacturing aspects, in-orbit and health monitoring, soft materials, hybrid materials and nanotechnologies | |
| Space engineering \x96 Structural materials handbook \x96 Part 8: Glossary | |
| Space engineering \x96 Thermal analysis handbook | |
| Space Engineering \x96 Thermal design handbook \x96 Part 2: Holes, Grooves and Cavities | |
| Space Engineering \x96 Thermal design handbook \x96 Part 4: Conductive Heat Transfer | |
| Space Engineering \x96 Thermal design handbook \x96 Part 6: Thermal Control Surfaces | |
| Space Engineering \x96 Thermal design handbook \x96 Part 7: Insulations | |
| Space Engineering \x96 Thermal design handbook \x96 Part 8: Heat Pipes | |
| Space product assurance \x96 Components reliability data sources and their use | |
| Space product assurance \x96 Worst case analysis | |
| Standard method for assessing and improving the energy efficiency of waste water treatment plants | |
| State of the art on the use of flammable refrigerant alternatives, in particular from class A3, in refrigeration, air conditioning and heat pump equipment | |
| Stationary source emissions \x96 Guideline for the elaboration of standardized measurement methods \x96 Recommendations for the structure and content | |
| Steel for the reinforcement of concrete \x96 Weldable reinforcing steels \x96 Reinforcement bars de-coiled by processor | |
| Steels and cast irons \x96 Determination of substances listed in the directives 2011/65/EU (RoHS) and 2000/53/EC (ELV) \x96 Limitations | |
| Sterilization of health care products \x96 Radiation \x96 Part 4: Guidance on process control (ISO/TS 11137-4:2020) | |
| Straight ammonium nitrate fertilizers \x96 Comparative study on the determination of porosity (oil retention) | |
| Surface active agents \x96 Bio-based surfactants \x96 Overview on bio-based surfactants | |
| Surfaces for sports areas \x96 Synthetic turf sports facilities \x96 Guidance on how to minimize infill dispersion into the environment | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications \x96 Principles, criteria, indicators and verifiers \x96 Part 2: Conformity assessment including chain of custody and mass balance... | |
| Systems and software engineering \x96 Systems and software Quality Requirements and Evaluation (SQuaRE) \x96 General framework for Common Industry Format (CIF) for usability-related information (ISO/DTR 25060:2022) | |
| Tactile paving surface indicators produced from concrete, clay and stone | |
| Tanks for transport of dangerous goods \x96 Guidance and recommendations for loading, transport and unloading | |
| Technical report regarding precision data for standards EN 12720, EN 12721, EN 12722, EN 15185 and EN 15186 | |
| Test method to measure the efficiency of air filtration media against spherical nanomaterials \x96 Part 2: Size range from 3 nm to 30 nm (ISO/PRF TS 21083-2:2018) | |
| Test methods for environmental characterization of solid matrices \x96 Guide to flash point testing | |
| Testing hardened concrete - Part 12: Determination of the potential carbonation resistance of concrete: Accelerated carbonation method | |
| Textiles \x96 Safety of children's clothing \x96 Guidance on the use of EN 14682:2014 Cords and drawstrings on children's clothing \x96 Specifications | |
| Textiles and textile products \x96 Smart (Intelligent) textiles \x96 Definitions, categorisation, applications and standardization needs (ISO/DTR 23383:2020) | |
| Textiles and textile products \x96 Textiles with integrated electronics and ICT \x96 Definitions, categorisation, applications and standardisation needs | |
| Thermoplastics piping and ducting systems \x96 Outside the building structures for gravity and pressurised systems \x96 Trench installation | |
| Three-level approach for a set of cybersecurity requirements for cloud services | |
| Transportable gas cylinders \x96 Porous materials for acetylene cylinders | |
| Unfired pressure vessels \x96 Acoustic emission for pressure vessels | |
| Use of plugs of bulk material in screw conveyors and product receivers for explosion isolation | |
| Validation testing program on chloride penetration and carbonation standardized test methods | |
| Ventilation for hospitals | |
| Waste \x96 State-of-the-art document \x96 Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection | |
| Waste \x96 Test methods for the determination of the monolithic status of waste to be landfilled | |
| Water quality \x96 Technical report for the management of diatom barcodes | |
| Water quality \x96 Technical report for the routine sampling of benthic diatoms from rivers and lakes adapted for metabarcoding analyses | |
| Water-tube boilers and auxiliary installations \x96 Part 17: Guideline for the involvement of an inspection body independent of the manufacturer | |
| Welding \x96 Grouping systems for materials \x96 American materials (ISO/DTR 20173:2018) | |
| Welding \x96 Grouping systems for materials \x96 European materials (ISO/PRF TR 20172:2020) | |
| Welding \x96 Grouping systems for materials \x96 Japanese materials (ISO/DTR 20174:2020) | |
| Welding \x96 Guidelines for a metallic materials grouping system (ISO/DTR 15608:2016) | |
| Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) | |
| Winter maintenance equipment \x96 Road weather information systems \x96 Part 4: Test methods for stationary equipment | |
| Workplace exposure \x96 Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936... |
| << Prev | Next >> |