Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
640
650
660
670
680
690
692
693
694
695
696
697
698
699
700
701
702
703
704
710
720
730
740
750
760
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives \x96 Wood adhesives \x96 Determination of tensile strength of lap joints at elevated temperature (WATT '91) | |
| Agricultural and forestry machinery \x96 Pedestrian controlled motor mowers \x96 Safety | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors \x96 Part 1: Terms and definitions | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors \x96 Part 2: Test conditions | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors \x96 Part 3: Test methods | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors \x96 Part 4: Requirements | |
| Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling \x96 Testing and rating at part load conditions and calculation of seasonal performance... | |
| Air quality \x96 Assessment of air quality monitoring equipment \x96 Part 1: General principles of certification | |
| Air quality \x96 Assessment of air quality monitoring equipment \x96 Part 2: Initial assessment of the manufacturer\x92s quality management system and post certification surveillance for the manufacturing process | |
| Aluminium and aluminium alloys \x96 Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry | |
| Anti-seismic devices | |
| Assessment of in-situ compressive strength in structures and precast concrete components | |
| Binders for floor screeds based on calcium sulphate \x96 Part 1: Definitions and requirements | |
| Binders for floor screeds based on calcium sulphate \x96 Part 2: Test methods | |
| Bitumen and bituminous binders \x96 Determination of cohesion of bituminous binders with pendulum test | |
| Bitumen and bituminous binders \x96 Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus | |
| Bitumen and bituminous binders \x96 Determination of settling tendency of bituminous emulsions | |
| Bitumen and bituminous binders \x96 Determination of storage stability of modified bitumen | |
| Bitumen and bituminous binders \x96 Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes | |
| Bitumen and bituminous binders \x96 Determination of the elastic recovery of modified bitumen | |
| Bitumen and bituminous binders \x96 Determination of the pH value of bituminous emulsions | |
| Bitumen and bituminous binders \x96 Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders \x96 Part 1: Recovery by evaporation | |
| Bitumen and bituminous binders \x96 Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders \x96 Part 2: Stabilization after recovery by evaporation | |
| Bituminous mixtures - Test methods - Part 35: Laboratory mixing | |
| Bituminous mixtures \x96 Material specifications \x96 Part 31: Asphalt Concrete with Bituminous Emulsion | |
| Bituminous mixtures \x96 Test method \x96 Part 33: Specimen prepared by roller compactor | |
| Bituminous mixtures \x96 Test methods \x96 Part 31: Specimen preparation by gyratory compactor | |
| Bituminous mixtures \x96 Test methods \x96 Part 32: Specimen preparation by vibratory compactor | |
| Bituminous mixtures \x96 Test methods \x96 Part 34: Marshall test | |
| Bituminous mixtures \x96 Test methods \x96 Part 39: Binder content by ignition | |
| Bituminous mixtures \x96 Test methods \x96 Part 40: In situ drainability | |
| Bituminous mixtures \x96 Test methods \x96 Part 42: Amount of foreign matter in reclaimed asphalt | |
| Bituminous mixtures \x96 Test methods \x96 Part 44: Crack propagation by semi-circular bending test | |
| Bituminous mixtures \x96 Test methods \x96 Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test | |
| Bituminous mixtures \x96 Test methods \x96 Part 46: Low temperature cracking and properties by uniaxial tension tests | |
| Bituminous mixtures \x96 Test methods \x96 Part 49: Determination of friction after polishing | |
| Bituminous mixtures \x96 Test methods \x96 Part 53: Cohesion increase by spreadability-meter method | |
| Bituminous mixtures \x96 Test methods \x96 Part 54: Curing of specimen for test of mixtures with bitumen emulsion | |
| Bituminous mixtures \x96 Test methods \x96 Part 56: Specimen preparation by static compaction | |
| Bituminous mixtures \x96 Test methods \x96 Part 5: Determination of the maximum density | |
| Bituminous mixtures \x96 Test methods \x96 Part 6: Determination of bulk density of bituminous specimens | |
| Bituminous mixtures \x96 Test methods \x96 Part 7: Determination of the bulk density of bituminous specimens by gamma rays | |
| Bituminous mixtures \x96 Test methods \x96 Part 8: Determination of void characteristics of bituminous specimens | |
| Bituminous mixtures \x96 Test methods for mix asphalt \x96 Part 55: Organoleptic assessment of mixtures with bitumen emulsion | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 13: Sash balances | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 14: Sash fasteners | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 15: Rollers for horizontal sliding and hardware for sliding folding windows | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 16: Hardware for Lift and Slide windows | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 17: Hardware for Tilt and Slide windows | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 1: Requirements common to all types of hardware | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 4: Espagnolettes | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 6: Variable geometry stay hinges (with or without a friction stay) | |
| Building hardware \x96 Hardware for windows and door height windows \x96 Requirements and test methods \x96 Part 9: Hardware for horizontal and vertical pivot windows | |
| Building hardware \x96 Hardware for windows and door-height windows \x96 Requirements and test methods \x96 Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware | |
| Building valves \x96 Expansion groups \x96 Tests and requirements | |
| Building valves \x96 Expansion valves \x96 Tests and requirements | |
| Buoyant aids for swimming instruction \x96 Part 1: Safety requirements and test methods for buoyant aids to be worn | |
| Carbonate and silicate liming materials \x96 Determination of reactivity \x96 Potentiometric titration method with hydrochloric acid | |
| Characterization and management of sludge \x96 Determination of settling properties \x96 Part 3: Determination of zone settling velocity (ZSV) | |
| Characterization of sludges \x96 Filtration properties \x96 Part 4: Determination of the drainability of flocculated sludges | |
| Characterization of waste \x96 Leaching behaviour test \x96 Up-flow percolation test (under specified conditions) | |
| Chemical disinfectants \x96 Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas \x96 Test method and requirements (phase 2,... | |
| Chemical disinfectants and antiseptics \x96 Application of European Standards for chemical disinfectants and antiseptics | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas \x96 Test method... | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area \x96 (phase 2, step 1) | |
| Child care articles \x96 Child carriers \x96 Safety requirements and test methods \x96 Part 1: Framed back carrier | |
| Child care articles \x96 Drinking equipment \x96 Safety requirements and test methods | |
| Child care articles \x96 Part 1: Children's harnesses, reins \x96 Safety requirements and test methods | |
| Child care articles \x96 Part 2: Children's harnesses incorporating backpacks and reins \x96 Safety requirements and test methods | |
| Child care articles \x96 Table mounted chairs \x96 Safety requirements and test methods | |
| Children's high chairs \x96 Requirements and test methods | |
| Chimney \x96 Clay/ceramic flue liners \x96 Part 1: Flue liners operating under dry conditions \x96 Requirements and test methods | |
| Chimneys \x96 Clay/ceramic flue liners \x96 Part 2: Flue liners operating under wet conditions \x96 Requirements and test methods | |
| Chimneys \x96 General requirements | |
| Chimneys \x96 Test methods for system chimneys \x96 Part 1: General test methods | |
| Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide | |
| Coil coated metals \x96 Test methods \x96 Part 10: Resistance to fluorescent UV radiation and water condensation | |
| Coil coated metals \x96 Test methods \x96 Part 11: Resistance to solvents (rubbing test) | |
| Coil coated metals \x96 Test methods \x96 Part 12: Resistance to scratching | |
| Coil coated metals \x96 Test methods \x96 Part 17: Adhesion of strippable films | |
| Coil coated metals \x96 Test methods \x96 Part 19: Panel design and method of atmospheric exposure testing | |
| Coil coated metals \x96 Test methods \x96 Part 1: Film thickness | |
| Coil coated metals \x96 Test methods \x96 Part 22: Colour difference \x96 Visual comparison | |
| Coil coated metals \x96 Test methods \x96 Part 25: Resistance to humidity | |
| Coil coated metals \x96 Test methods \x96 Part 26: Resistance to condensation of water | |
| Coil coated metals \x96 Test methods \x96 Part 27: Resistance to humid poultice (Cataplasm test) | |
| Coil coated metals \x96 Test methods \x96 Part 29: Resistance to environmental soiling (Dirt pick-up and striping) | |
| Coil coated metals \x96 Test methods \x96 Part 9: Resistance to water immersion | |
| Cold applied joint sealants \x96 Test method \x96 Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants \x96 Test methods \x96 Part 2: Determination of tack free time | |
| Cold applied joint sealants \x96 Test methods \x96 Part 3: Determination of self-levelling properties | |
| Cold applied joint sealants \x96 Test methods \x96 Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants \x96 Test methods \x96 Part 8: Determination of the artificial weathering by UV-irradiation | |
| Communication systems for meters \x96 Part 2: Wired M-Bus communication | |
| Communication systems for meters \x96 Part 3: Application protocols | |
| Communication systems for meters \x96 Part 7: Transport and security services | |
| Compressors and condensing units for refrigeration \x96 Performance testing and test methods \x96 Part 2: Condensing units | |
| Concrete pavements \x96 Part 5: Determination of the bond stress of dowels to be used in concrete pavements | |
| Concrete pavements \x96 Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs | |
| Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment | |
| Copper and copper alloys \x96 Scrap | |
| Copper and copper alloys \x96 Seamless, round tubes for air conditioning and refrigeration \x96 Part 1: Tubes for piping systems | |
| Corrugated metal hose assemblies for pressure applications | |
| Covering \x96 Determination of fire protection ability | |
| Crane \x96 Safety \x96 Non-fixed load lifting attachments | |
| Cranes \x96 Access | |
| Cranes \x96 Control devices and control stations | |
| Cranes \x96 General design \x96 Part 3-4: Limit states and proof of competence of machinery \x96 Bearings | |
| Cranes \x96 General design \x96 Part 3-8: Limit states and proof competence of machinery \x96 Shafts | |
| Cranes \x96 Offshore cranes \x96 Part 1: General-purpose offshore cranes | |
| Cranes \x96 Power driven winches and hoists \x96 Part 2: Power driven hoists | |
| Curtain walling \x96 Resistance to wind load \x96 Performance requirements | |
| Decorative wallcoverings \x96 Roll form | |
| Design of fans working in potentially explosive atmospheres | |
| Determination of the uplift resistance of installed clay or concrete tiles for roofing \x96 Roof system test method | |
| Determination of total organic carbon in limestone | |
| Devices to prevent pollution by backflow of potable water \x96 Air gap with injector \x96 Family A \x96 Type D | |
| Devices to prevent pollution by backflow of potable water \x96 Air gap with non-circular overflow (unrestricted) \x96 Family A \x96 Type B | |
| Devices to prevent pollution by backflow of potable water \x96 Hose Union anti-vacuum valves \x96 DN 15 to DN 25 inclusive Family H, type B and type D \x96 General... | |
| District heating pipes \x96 Bonded single and twin pipe systems for buried hot water networks \x96 Surveillance systems | |
| District heating pipes \x96 Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks \x96 Part 1: Design | |
| District heating pipes \x96 Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks \x96 Part 2: Installation | |
| Diving suits \x96 Part 1: Wet suits \x96 Requirements and test methods | |
| Diving suits \x96 Part 2: Dry suits \x96 Requirements and test methods | |
| Diving suits \x96 Part 3: Actively heated or cooled suit systems and components \x96 Requirements and test methods | |
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | |
| Double skin metal faced insulating panels \x96 Factory made products \x96 Specifications \x96 Part 2: Structural applications \x96 Fixings and potential uses of stabilization of individual structural elements | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 1: General requirements | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 2: Rehabilitation | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 3: Drain and sewer cleaning | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 4: Control of inputs from users | |
| Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement | |
| Ductile iron pipes, fittings and accessories \x96 Requirements and test methods for organic coatings of ductile iron fittings and accessories \x96 Part 2: Thermoplastic acid modified polyolefin coating (TMPO) | |
| Durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Part 1: Wood held in the storage yard after treatment and wooden... | |
| Durability of wood and wood-based products \x96 Efficacy criteria for curative wood preservatives as determined by biological tests | |
| Emergency safety showers \x96 Part 5: Water overhead body showers for sites other than laboratories | |
| Emergency safety showers \x96 Part 6: Plumbed-in multiple nozzle body showers for sites other than laboratories | |
| Energy Performance of Buildings \x96 Energy performance of buildings \x96 Part 1: Impact of Building Automation, Controls and Building Management \x96 Modules M10-4,5,6,7,8,9,10 | |
| Energy performance of buildings \x96 Energy requirements for lighting \x96 Part 1: Specifications, Module M9 | |
| Energy performance of buildings \x96 Method for calculation of the design heat load \x96 Part 1: Space heating load, Module M3-3 | |
| Energy performance of buildings \x96 Method for calculation of the design heat load \x96 Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3 | |
| Environmental matrices \x96 Determination of total dissolved solids (TDS) in water and eluates \x96 Complementary element | |
| Execution of special geotechnical work \x96 Grouting | |
| Execution of special geotechnical work \x96 Jet grouting | |
| Explosion resistant equipment | |
| Extended application of results from fire resistance tests \x96 Non-loadbearing ceilings \x96 Part 7: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests \x96 Non-loadbearing walls \x96 Part 3: Lightweight partitions | |
| Extended application of results from fire resistance tests \x96 Non-loadbearing walls \x96 Part 4: Glazed constructions | |
| Extended application of results from fire resistance tests \x96 Non-loadbearing walls \x96 Part 5: Metal sandwich panel construction | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware \x96 Part 11: Fire resistance for... | |
| Facility Management \x96 Part 8: Principles and processes | |
| Fat and oil derivates \x96 Fatty acid methyl ester (FAME) \x96 Determination of acid value | |
| Fat and oil derivatives \x96 Fatty acid methyl ester (FAME) \x96 Determination of Ca, Mg, Na, K and P content by optical emission spectral analysis with inductively coupled plasma (ICP... | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters (FAME) \x96 Determination of ester and linolenic acid methyl ester contents | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters (FAME) \x96 Determination of free and total glycerol and mono-, di-, triglyceride contents | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters \x96 Determination of methanol content | |
| Fertilizers and liming materials \x96 Vocabulary \x96 Part 3: Terms relating to liming materials | |
| Fire classification of construction products and building elements \x96 Part 1: Classification using data from reaction to fire tests | |
| Fire classification of construction products and building elements \x96 Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ventilation... | |
| Fire classification of construction products and building elements \x96 Part 6: Classification using data from reaction to fire tests on power, control and communication cables | |
| Fire resistance for tests for non-loadbearing elements \x96 Part 2: Ceilings | |
| Fire resistance tests \x96 Part 1: General requirements | |
| Fire resistance tests for non-loadbearing elements \x96 Part 5: Air transfer grilles | |
| Fire resistance tests for service installations \x96 Part 10: Smoke control dampers | |
| Fire resistance tests for service installations \x96 Part 13: Chimneys | |
| Fixed firefighting systems \x96 Foam systems \x96 Part 1: Requirements and test methods for components | |
| Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified) | |
| Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 15420-9:2019, modified) | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m\xb3 for open nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m\xb3 for open nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 16: Test protocol for industrial oil cookers for open nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 1: Design, installation, inspection and maintenance | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 7: Test protocol for commercial low hazard occupancies for automatic nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 8- Test protocol for machinery in enclosures exceeding 260 m\xb3 for open nozzle systems | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 9: Test protocol for machinery in enclosures not exceeding 260 m\xb3 for open nozzle systems | |
| Flanges and their joints \x96 Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 | |
| Flexible sheets for waterproofing \x96 Reinforced bitumen sheets for roof waterproofing \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Determination of resistance to dynamic water pressure after damage by pre-treatment | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Specimen preparation | |
| Floor cutting-off machines \x96 Safety | |
| Food processing machinery \x96 Bulk milk coolers on farms \x96 Requirements for performance, safety and hygiene | |
| Food processing machinery \x96 Clipping machines \x96 Safety and hygiene requirements | |
| Foodstuffs \x96 Determination of trace elements \x96 Part 1: Determination of total mercury in foodstuffs by atomic absorption spectrometry (AAS) \x96 cold vapour technique after pressure digestion | |
| Foodstuffs \x96 Determination of trace elements \x96 Part 2: Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS) \x96 cold vapour technique after pressure digestion | |
| Foodstuffs \x96 Determination of trace elements \x96 Part 3: Determination of total mercury in foodstuffs with atomic absorption directly from the foodstuff (elemental mercury analysis) | |
| Footwear protecting against chemicals \x96 Part 1: Terminology and test methods | |
| Footwear protecting against chemicals \x96 Part 2: Requirements for limited contact with chemicals | |
| Footwear protecting against chemicals \x96 Part 3: Requirements for prolonged contact with chemicals | |
| Forestry machinery \x96 Wood chippers \x96 Safety | |
| Fume cupboards \x96 Part 8: Fume cupboards for work with radioactive materials | |
| Funeral Services \x96 Requirements | |
| Furniture - Assessment of the surface resistance to scratching | |
| Furniture \x96 Assessment of the effect of light exposure | |
| Gas Infrastructure \x96 Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations \x96 Part 1:... | |
| Gas meters \x96 Diaphragm gas meters | |
| Gas safety shut-off devices for inlet pressure up to 100 bar | |
| Gas supply systems \x96 Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations \x96 Part... | |
| Gas-fired domestic appliances producing hot water \x96 Part 2: Assessment of energy consumption | |
| Gas-fired domestic appliances producing hot water \x96 Part 3: Assessment of energy consumption of solar supported gas-fired appliances | |
| Gas-fired domestic appliances producing hot water \x96 Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity | |
| Gas-fired domestic appliances producing hot water \x96 Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump | |
| Gas-fired domestic appliances producing hot water \x96 Part 6: Assessment of energy consumption of adsorption and absorption heat pumps | |
| Gas-fired domestic appliances producing hot water \x96 Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device | |
| Gas-loaded accumulators for fluid power applications | |
| General principles of cathodic protection of buried or immersed onshore metallic structures | |
| Geosynthetic Barriers \x96 Characteristics required for use in the construction of canals | |
| Geosynthetic barriers \x96 Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment | |
| Geosynthetic barriers \x96 Characteristics required for use in the construction of reservoirs and dams | |
| Geosynthetic barriers \x96 Characteristics required for use in the construction of solid waste storage and disposal sites | |
| Geosynthetic barriers \x96 Characteristics required for use in the construction of tunnels and associated underground structures | |
| Geosynthetic barriers \x96 Determination of permeability to liquids | |
| Glass in building \x96 Determination of the emissivity | |
| Glass in building \x96 Glazing and airborne sound insulation \x96 Product descriptions, determination of properties and extension rules | |
| Glass in building \x96 Heat soaked thermally toughened soda lime silicate safety glass \x96 Part 2: Product standard | |
| Glass in Building \x96 Insulating glass units \x96 Part 1: Generalities, system description, rules for substitution, tolerances and visual quality | |
| Glass in building \x96 Insulating glass units \x96 Part 2: Long term test method and requirements for moisture penetration | |
| Glass in Building \x96 Insulating Glass Units \x96 Part 4: Methods of test for the physical attributes of edge seal components and inserts | |
| Glass in building \x96 Insulating glass units \x96 Part 5: Evaluation of conformity | |
| Glass in building \x96 Insulating glass units \x96 Part 6: Factory production control and periodic tests | |
| Glass in building \x96 Thermally toughened borosilicate safety glass \x96 Part 1: Definition and description | |
| Glass in building \x96 Thermally toughened borosilicate safety glass \x96 Part 2: Product standard | |
| Greenhouses: Design and Construction \x96 Part 1: Commercial production greenhouses | |
| GRP tanks and vessels for use above ground \x96 Part 1: Raw materials \x96 Specification conditions and acceptance criteria | |
| Hearing protectors \x96 Testing \x96 Part 3: Supplementary acoustic test method | |
| Heat exchanger \x96 Forced convection air cooled refrigerant condensers and dry coolers \x96 Sound measurement | |
| Heat meters - Part 3: Data exchange and interfaces | |
| Heating systems in buildings \x96 Installation and commissioning of water based heating systems | |
| Helmets for equestrian activities | |
| High-strength structural bolting assemblies for preloading \x96 Part 10: System HRC \x96 Bolt and nut assemblies with calibrated preload | |
| High-strength structural bolting assemblies for preloading \x96 Part 7: System HR \x96 Countersunk head bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 8: System HV \x96 Hexagon fit bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 9: System HR or HV \x96 Direct tension indicators for bolt and nut assemblies | |
| Hot applied joint sealants \x96 Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression | |
| Hot applied joint sealants \x96 Part 13: Test method for the determination of the discontinuous extension (adherence test) | |
| Hot applied joint sealants \x96 Part 3: Test method for the determination of penetration and recovery (resilience) | |
| Hot applied joint sealants \x96 Part 4: Test method for the characterization of heat resistance \x96 Change in penetration value | |
| Hot applied joint sealants \x96 Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion | |
| Hydraulic road binders - Part 3: Conformity evaluation | |
| Identification and/or determination of the quantity of waste | |
| Identification card systems \x96 User Interface \x96 Part 3: Key pads | |
| Imperfections in thermoplastic welds \x96 Classification | |
| Inflatable play equipment \x96 Part 1: Safety requirements and test methods | |
| Inflatable play equipment \x96 Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation | |
| Influence of cementitious products on water intended for human consumption \x96 Test methods \x96 Part 1: Influence of factory made cementitious products on organoleptic parameters | |
| Influence of materials on water intended for human consumption \x96 Influence due to migration \x96 Part 2: Test method for non-metallic and noncementitious site-applied materials | |
| Influence of materials on water intended for human consumption \x96 Influence due to migration | |
| Inland navigation vessels \x96 Boarding stairs | |
| Inland navigation vessels \x96 Floating landing stages and floating bridges on inland waters \x96 Requirements, tests | |
| Joint fillers and sealants \x96 Part 2: Specifications for cold applied sealants | |
| Laboratory furniture \x96 Recommendations for design and installation \x96 Part 1: General | |
| Ladders \x96 Part 3: Marking and user instructions | |
| Ladders \x96 Part 4: Single or multiple hinge-joint ladders | |
| Ladders \x96 Part 6: Telescopic ladders | |
| Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems | |
| Leather \x96 Upholstery leather characteristics \x96 Guide for selection of leather for furniture | |
| Leisure accommodation vehicles \x96 Terms and definitions | |
| Lifebuoys \x96 Requirements, tests | |
| Light and lighting \x96 Measurement and presentation of photometric data of lamps and luminaires \x96 Part 5: Presentation of data for luminaires used for road lighting | |
| Liming materials \x96 Denominations, specifications and labelling | |
| Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives \x96 Essential characteristics and AVCP | |
| Liquid petroleum products \x96 Vapour pressure \x96 Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) | |
| Liquid petroleum products \x96 Vapour pressure \x96 Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) | |
| LPG equipment and accessories \x96 Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels | |
| LPG equipment and accessories \x96 Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections | |
| LPG equipment and accessories \x96 Filling and discharge procedures for LPG rail tankers | |
| LPG equipment and accessories \x96 Filling and discharge procedures for LPG road tankers | |
| LPG equipment and accessories \x96 Filling operations for LPG cylinders | |
| LPG equipment and accessories \x96 Inspection and requalification of LPG pressure vessels greater than 13 m\xb3 | |
| LPG Equipment and accessories \x96 Inspection and requalification of LPG pressure vessels up to and including 13 m\xb3 | |
| LPG equipment and accessories \x96 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) | |
| LPG equipment and accessories \x96 Procedure for checking transportable refillable LPG cylinders before, during and after filling | |
| LPG Equipment and accessories \x96 Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | |
| LPG equipment and accessories \x96 Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) \x96 Design and construction | |
| LPG equipment and accessories \x96 Transportable refillable welded steel cylinders for LPG \x96 Design and construction | |
| Machines and installations for the exploitation and processing of natural stone \x96 Safety \x96 Requirements for diamond wire saws | |
| Maintenance \x96 Maintenance terminology | |
| Maintenance for lifts and escalators \x96 Rules for maintenance instructions | |
| Manufactured articles filled with feather and down \x96 Method for the determination of a filled product's total mass and for the determination of the mass of the filling | |
| Materials obtained from end of life tyres \x96 Part 1: General definitions related to the methods for determining their dimension(s) and impurities | |
| Materials obtained from end of life tyres \x96 Part 2: Granulates and powders \x96 Methods for determining the particle size distribution and impurities, including free steel and free textile content... | |
| Materials obtained from end of life tyres \x96 Part 3: Shreds, cuts and chips \x96 Methods for determining their dimension(s) including protruding filaments dimensions | |
| Medical face masks \x96 Requirements and test methods | |
| Metallic and other inorganic coatings \x96 Method for quantitative measurement of adhesion by tensile test | |
| Methods of test for screed materials \x96 Part 9: Determination of shrinkage and swelling | |
| Natural stone test methods \x96 Determination of geometric characteristics on units | |
| Non-destructive testing of welded joints in thermoplastics semi- finished products \x96 Part 2: X-ray radiographic testing | |
| Office furniture \x96 Office work chair \x96 Part 1: Dimensions \x96 Determination of dimensions | |
| Office furniture \x96 Office work chair \x96 Part 2: Safety requirements | |
| Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 10: Web Services for Control Networking Protocol Specification | |
| Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 6: Application elements | |
| Open data communication in building automation, controls and building management \x96 Home and building electronic system \x96 Part 1: Product and system requirements | |
| Overfill prevention devices for static tanks for liquid fuels \x96 Part 1: Overfill prevention devices with closure device | |
| Passive safety of support structures for road equipment \x96 Requirements and test methods | |
| Pasta processing plant \x96 Dryers and coolers \x96 Safety and hygiene requirements | |
| Pasta processing plant \x96 Pasta presses \x96 Safety and hygiene requirements | |
| Pasta processing plant \x96 Spreader, stripping and cutting machine, stick return conveyor \x96 Safety and hygiene requirements | |
| Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants | |
| Personal eye-equipment \x96 High performance visors intended only for use with protective helmets | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 1: Test methods | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 2: Requirements for wearable knee protectors (type 1) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 3: Requirements for the individual combination of knee pads and garments (type 2) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 5: Requirements for knee mats (type 3) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 6: Requirements for kneeling systems (type 4) | |
| Petroleum products \x96 Determination of aromatic hydrocarbon types in middle distillates \x96 High performance liquid chromatography method with refractive index detection | |
| Petroleum products \x96 Determination of boiling range distribution by gas chromatography method \x96 Part 1: Middle distillates and lubricating base oils | |
| Petroleum products \x96 Determination of boiling range distribution by gas chromatography method \x96 Part 2: Heavy distillates and residual fuels | |
| Petroleum products \x96 Determination of boiling range distribution by gas chromatography method \x96 Part 3: Crude oil | |
| Plastics \x96 Thermoplastic covering films for use in agriculture and horticulture | |
| Plastics \x96 Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture | |
| Plastics \x96 Thermoplastic stretch films for wrapping silage bales | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 1:General requirements and performance characteristics... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 2: Specifications for pipes and... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 3: Specifications for pipes and... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 1: Specifications for pipes, fittings and the systems | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 1: Specifications for ancillary fittings and shallow chambers | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 2: Specifications for manholes and inspection chambers | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Acrylonitrile-butadi ene-styrene (ABS) \x96 Part 1: Specifications for pipes, fittings and the system... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polyethylene (PE) \x96 Part 1: Requirements for pipes, fittings and the system | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 1: Specifications for pipes, fittings and the... | |
| Plastics sacks for household waste collection \x96 Types, requirements and test methods | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps \x96 Hand-held branchpipes for fire service use \x96 Part 4: High pressure branchpipes PN 40 | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps \x96 Hand-held branchpipes for fire service use \x96 Part 1: Common requirements | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps \x96 Hand-held branchpipes for fire service use \x96 Part 2: Combination branchpipes PN 16 | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps \x96 Hand-held branchpipes for fire service use \x96 Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes... | |
| Postal services \x96 Quality of service \x96 Complaints handling principles | |
| Postal services \x96 Quality of services \x96 Measurement of the transit time of end-to-end services for single piece priority mail and first class mail | |
| Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres | |
| Pressure equipment for refrigerating systems and heat pumps \x96 Part 1: Vessels \x96 General requirements | |
| Pressure equipment for refrigerating systems and heat pumps \x96 Part 2: Piping \x96 General requirements | |
| Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 10: Site application of products and systems and... | |
| Protective clothing \x96 Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers \x96 Requirements and test methods | |
| Protective clothing against chemicals \x96 Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing for firefighters \x96 Requirements and test methods for fire hoods for firefighters | |
| Quality management systems \x96 EN ISO 9001:2015 for healthcare | |
| Railway applications \x96 Aerodynamics \x96 Part 6: Requirements and test procedures for cross wind assessment | |
| Railway applications \x96 Bodyside entrance systems for rolling stock | |
| Railway applications \x96 Brake indicators | |
| Railway applications \x96 Braking \x96 Generic vocabulary | |
| Railway applications \x96 Braking \x96 Requirements for the brake system of trains hauled by locomotives | |
| Railway applications \x96 Crashworthiness requirements for railway vehicle bodies | |
| Railway applications \x96 External visible and audible warning devices \x96 Part 1: Head, marker and tail lamps for heavy rail | |
| Railway applications \x96 External visible and audible warning devices \x96 Part 2: Warning horns for heavy rail | |
| Railway applications \x96 External visible and audible warning devices \x96 Part 3: Visible warning devices for urban rail | |
| Railway applications \x96 External visible and audible warning devices \x96 Part 4: Audible warning devices for urban rail | |
| Railway applications \x96 Infrastructure \x96 Flash butt welding of new rails \x96 Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant | |
| Railway applications \x96 Infrastructure \x96 Flash butt welding of new rails \x96 Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines... | |
| Railway applications \x96 Rescue coupler \x96 Performance requirements, specific interface geometry and test methods | |
| Railway applications \x96 Technical documents \x96 Part 1: General principles | |
| Railway applications \x96 Technical documents \x96 Part 2: Parts lists | |
| Railway applications \x96 Technical documents \x96 Part 3: Handling of modifications of technical documents | |
| Railway applications \x96 Track \x96 Acceptance of works \x96 Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices | |
| Railway applications \x96 Track \x96 Concrete sleepers and bearers \x96 Part 6: Design | |
| Railway applications \x96 Track \x96 Performance requirements for fastening systems \x96 Part 2: Fastening systems for concrete sleepers in ballast | |
| Railway applications \x96 Track \x96 Performance requirements for fastening systems \x96 Part 3: Fastening systems for wood and polymeric composite sleepers | |
| Railway applications \x96 Track \x96 Performance requirements for fastening systems \x96 Part 4: Fastening systems for steel sleepers in ballast | |
| Railway applications \x96 Track \x96 Performance requirements for fastening systems \x96 Part 5: Fastening systems for ballastless track | |
| Railway applications \x96 Track \x96 Performance requirements for fastening systems \x96 Part 7: Fastening systems for switches and crossings, check rails, insulated rail joints and rail expansion devices | |
| Railway applications \x96 Track \x96 Rail \x96 Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above | |
| Railway applications \x96 Track \x96 Rail \x96 Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 3: General safety requirements | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 4: Technical requirements for running, travelling and working on urban rail | |
| Railway applications \x96 Track \x96 Special purpose rail \x96 Grooved and associated construction | |
| Railway applications \x96 Track \x96 Test methods for fastening systems \x96 Part 1: Determination of longitudinal rail restraint | |
| Railway applications \x96 Track \x96 Test methods for fastening systems \x96 Part 7: Determination of clamping force and uplift stiffness | |
| Railway applications \x96 Track \x96 Track alignment design parameters \x96 Track gauges 1 435 mm and wider | |
| Railway applications \x96 Track \x96 Track geometry quality \x96 Part 1: Characterization of track geometry | |
| Railway applications \x96 Track \x96 Track geometry quality \x96 Part 2: Measuring systems \x96 Track recording vehicles | |
| Railway applications \x96 Track \x96 Track geometry quality \x96 Part 5: Geometric quality levels \x96 Plain line, switches and crossings | |
| Railway applications \x96 Welding of railway vehicles and components \x96 Part 2: Requirements for welding manufacturer | |
| Railway applications \x96 Welding of railway vehicles and components \x96 Part 3: Design requirements | |
| Railway applications \x96 Welding of railway vehicles and components \x96 Part 6: Maintenance welding requirements | |
| Railway applications \x96 Wheelsets and bogies \x96 Axles \x96 Product requirements | |
| Railway applications \x96 Wheelsets and bogies \x96 Monobloc wheels \x96 Design assessment procedure \x96 Part 1: Forged and rolled wheels | |
| Railway applications \x96 Wheelsets and bogies \x96 Wheels \x96 Product requirements | |
| Railway applications \x96 Wheelsets and bogies \x96 Wheelsets \x96 Product requirements | |
| Railway applications \x96 Windscreens for trains | |
| Refrigerant compressors \x96 Rating conditions, tolerances and presentation of performance data | |
| Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 1: Rear loaded refuse collection vehicles | |
| Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 2: Side loaded refuse collection vehicles | |
| Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 3: Front loaded refuse collection vehicles | |
| Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 5: Lifting devices for refuse collection vehicles | |
| Residential liquid fuel burning appliances \x96 Part 2: Flued oil stoves with vaporizing burners | |
| Resilient, textile, laminate and modular multilayer floor coverings \x96 Essential characteristics | |
| Respiratory protective devices \x96 Compressed air line breathing apparatus with demand valve \x96 Part 1: Devices with a full face mask \x96 Requirements, testing and marking | |
| Respiratory protective devices \x96 Continuous flow compressed air line breathing devices \x96 Requirements, testing and marking | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 1: Inlet connections | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 2: Outlet connections | |
| Respiratory protective devices \x96 Gas filter(s) and combined filter(s) \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Methods of test \x96 Part 2: Practical performance tests | |
| Respiratory protective devices \x96 Methods of test \x96 Part 4: Flame test | |
| Respiratory protective devices \x96 Methods of test \x96 Part 7: Determination of particle filter penetration | |
| Respiratory protective devices \x96 Particle filters \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Powered filtering devices incorporating a loose fitting respiratory interface \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Powered filtering devices incorporating full face masks, half masks or quarter masks \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Threads for facepieces \x96 Part 1: Standard thread connection | |
| Road and airfield surface characteristics \x96 Test methods \x96 Part 5: Determination of longitudinal unevenness indices | |
| Road marking materials \x96 Road marking performance for road users and test methods | |
| Road traffic noise reducing devices \x96 Specifications | |
| Roller sports equipment \x96 Kick scooters \x96 Safety requirements and test methods | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 1: Variable-reach trucks | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened | |
| Round and sawn timber \x96 Methods of measurements \x96 Part 3: Features and biological degradations | |
| Safety of amusement rides and amusement devices \x96 Part 1: Design and manufacture | |
| Safety of amusement rides and amusement devices \x96 Part 2: Operation, maintenance and use | |
| Safety of amusement rides and amusement devices \x96 Part 3: Requirements for inspection during design, manufacture, operation and use | |
| Safety of machinery \x96 Safety requirements for hot flat rolling mills | |
| Safety requirements for cableway installations designed to carry persons \x96 Ropes | |
| Safety requirements for superabrasive products | |
| Screed material and floor screeds \x96 Screed material \x96 Properties and requirements | |
| Screed material and floor screeds \x96 Vocabulary | |
| Secure storage units \x96 Classification for high security locks according to their resistance to unauthorized opening | |
| Secure storage units \x96 Requirements, classification and methods of test for resistance to burglary \x96 Secure safe cabinets | |
| Shell boilers \x96 Part 4: Workmanship and construction of pressure parts of the boiler | |
| Shell boilers \x96 Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler | |
| Size Designation of clothes \x96 Part 3 Size Labelling based on body measurements and intervals | |
| Skateparks \x96 Safety requirements and test methods | |
| Solar collectors \x96 General requirements | |
| Solid wood panels (SWP) \x96 Requirements | |
| Specification for dedicated liquefied petroleum gas appliances \x96 Parasol patio heaters \x96 Flueless radiant heaters for outdoor or amply ventilated area use | |
| Spectator facilities \x96 Part 1: General characteristics for spectator viewing area | |
| Spectator facilities \x96 Part 4: Seats \x96 Product characteristics | |
| Spectator facilities \x96 Part 8: Safety Management | |
| Stainless steel steam boilers | |
| Stationary source emissions \x96 Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied \x96 Part 1: General requirements | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied \x96 Part 2: Additional requirements for underground or partly underground systems | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied \x96 Part 3: Recommended lifting connections | |
| Sterilizers for medical purposes \x96 Low temperature steam and formaldehyde sterilizers \x96 Requirements and testing | |
| Structural design of buried pipelines under various conditions of loading \x96 Part 1: General requirements | |
| Surfaces for sports areas \x96 Determination of resistance to impact | |
| Surfaces for sports areas \x96 Multi-sports floor systems for indoor use \x96 Part 1: Essential characteristics | |
| Surfaces for sports areas \x96 Multi-sports floor systems for indoor use \x96 Part 2: Specifications | |
| Surfaces for sports areas \x96 Multi-sports floor systems for indoor use \x96 Part 3: In-situ testing | |
| Surfaces for sports areas \x96 Synthetic surfaces for outdoor sports areas \x96 Test method for artificial weathering | |
| Surgical clothing and drapes \x96 Requirements and test methods \x96 Part 1: Surgical drapes and gowns | |
| Surgical clothing and drapes \x96 Requirements and test methods \x96 Part 2: Clean air suits | |
| Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms | |
| Swimming pool equipment \x96 Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment | |
| Swimming pool equipment \x96 Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads | |
| Swimming pool equipment \x96 Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves | |
| Tanks for the transport of dangerous goods \x96 Metallic pressure tanks \x96 Design and construction | |
| Tanks for transport of dangerous goods \x96 Service equipment for tanks \x96 Emergency pressure relief valve | |
| Tanks for transport of dangerous goods \x96 Service equipment for tanks \x96 Manhole cover assembly | |
| Tanks for transport of dangerous goods \x96 Service equipment for tanks \x96 Overfill prevention systems for liquid fuels | |
| Tanks for transport of dangerous goods \x96 Terminology | |
| Tanks for transport of dangerous goods \x96 Testing, inspection and marking of metallic tanks | |
| Terminations for steel wire ropes \x96 Safety \x96 Part 4: Metal and resin socketing | |
| Terminations for steel wire ropes \x96 Safety \x96 Part 7: Symmetric wedge socket | |
| Textile floor coverings \x96 Assessment of impregnations in needled floor coverings by means of a soiling test | |
| Thermal insulation products for building applications \x96 Determination of the mechanical properties of glass fibre meshes as reinforcement for external thermal insulation composite kits with renders (ETIC kits) | |
| Thermal insulation products for building applications \x96 Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) | |
| Thermal insulation products for building applications \x96 Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | |
| Thermal insulation products for building applications \x96 Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | |
| Thermal insulation products for buildings \x96 In-situ formed expanded clay lightweight aggregate products \x96 Part 1: Specification for the loose-fill products before installation | |
| Thermal solar systems and components \x96 Factory made systems \x96 Part 1: General requirements | |
| Thermal solar systems and components \x96 Factory made systems \x96 Part 2: Test methods | |
| Thermal spraying \x96 Acceptance inspection of thermal spraying equipment \x96 Part 5: Plasma spraying in chambers | |
| Thermal spraying \x96 Pre-treatment of surfaces of metallic parts and components for thermal spraying | |
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals \x96 Specification | |
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas \x96 Specification | |
| Timbe structures \x96 Strength graded structural timber with rectangular cross section \x96 Part 2: Machine grading; additional requirements for type testing | |
| Timber structures \x96 Dowel-type fasteners \x96 Requirements | |
| Timber structures \x96 Laminated veneer lumber (LVL) \x96 Requirements | |
| Tractors and machinery for agriculture and forestry \x96 Power take-off (PTO) drive shafts and their guards \x96 Safety | |
| Transportable gas cylinders \x96 Battery vehicles and multiple-element gas containers (MEGCs) \x96 Design, manufacture, identification and testing | |
| Unbound mixtures \x96 Specifications | |
| Unfired pressure vessels \x96 Part 11: Additional requirements for pressure vessels of titanium and titanium alloys | |
| Value Management | |
| Ventilation for buildings \x96 Air handling units \x96 Rating and performance for units, components and sections | |
| Ventilation for buildings \x96 Performance testing and installation checks of residential ventilation systems | |
| Ventilation for buildings \x96 Performance testing of components/products for residential ventilation \x96 Part 1: Externally and internally mounted air transfer devices | |
| Ventilation for buildings \x96 Performance testing of components/products for residential ventilation \x96 Part 3: Range hoods for residential use without fan | |
| Ventilation for buildings \x96 Performance testing of components/products for residential ventilation \x96 Part 5: Cowls, assisted cowls and roof outlet terminal devices | |
| Vertical road signs \x96 Portable deformable warning devices and delineators \x96 Portable road traffic signs \x96 Cones and cylinders | |
| Water-tube boilers and auxiliary installations \x96 Part 10: Requirements for safety devices against excessive pressure | |
| Water-tube boilers and auxiliary installations \x96 Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler | |
| Water-tube boilers and auxiliary installations \x96 Part 2: Materials for pressure parts of boilers and accessories | |
| Water-tube boilers and auxiliary installations \x96 Part 5: Workmanship and construction of pressure parts of the boiler | |
| Water-tube boilers and auxiliary installations \x96 Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler | |
| Water-tube boilers and auxiliary installations \x96 Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler | |
| Water-tube boilers and auxiliary installations \x96 Part 9: Requirements for firing systems for pulverized solid fuels for the boiler | |
| Welding consumables \x96 Welding consumables for hard-facing | |
| Windows and doors \x96 Product standard, performance characteristics \x96 Part 2: Internal pedestrian doorsets | |
| Windows, doors, shutters and curtain walling \x96 Explosion resistance \x96 Requirements and classification \x96 Part 2: Arena test | |
| Windows, doors, shutters and curtain walling \x96 Explosion resistance \x96 Test method \x96 Part 2: Arena test | |
| Wood flooring \x96 Solid individual and pre-assembled hardwood boards | |
| Wood flooring \x96 Solid lamparquet products | |
| Wood flooring and parquet \x96 Terminology | |
| Wood preservatives \x96 Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae \x96 Laboratory method | |
| Wood-based panels \x96 Melamine faced board for interior uses \x96 Definition, requirements and classification | |
| Wood-based panels \x96 Melamine faced boards for interior uses \x96 Test methods | |
| Wood-based panels \x96 Wood veneer floor coverings | |
| Workbenches for laboratories in educational institutions \x96 Dimensions, safety and durability requirements and test methods | |
| Workplace exposure \x96 Measurement of airborne microorganisms and microbial compounds \x96 General requirements | |
| Workplace exposure \x96 Measurement of the dustiness of bulk materials \x96 Part 1: Requirements and choice of test methods | |
| Workplace exposure \x96 Measurement of the dustiness of bulk materials \x96 Part 3: Continuous drop method |
| << Prev | Next >> |