Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
610
620
630
640
650
660
663
664
665
666
667
668
669
670
671
672
673
674
675
680
690
700
710
720
730
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV | |
| Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition | |
| Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification | |
| Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification | |
| Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification | |
| Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification | |
| Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies | |
| Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies | |
| Adjustable speed electrical power drive systems \x96 Part 1: General requirements \x96 Rating specifications for low voltage d.c. power drive systems | |
| Adjustable speed electrical power drive systems \x96 Part 2: General requirements \x96 Rating specifications for low voltage adjustable speed a.c. power drive systems | |
| Adjustable speed electrical power drive systems \x96 Part 3: EMC requirements and specific test methods | |
| Adjustable speed electrical power drive systems \x96 Part 5-1: Safety requirements \x96 Electrical, thermal and energy | |
| Adjustable speed electrical power drive systems \x96 Part 5-2: Safety requirements \x96 Functional | |
| Adjustable speed electrical power drive systems \x96 Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications \x96 Energy efficiency indicators for power drive systems... | |
| Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution | |
| Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for maintenance and construction | |
| Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 100: Implementation profiles | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 13: CIM RDF Model exchange format for distribution | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 1: Interface architecture and general recommendations | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 3: Interface for network operations | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 4: Interfaces for records and asset management | |
| Application integration at electric utilities \x96 System interfaces for distribution management \x96 Part 8: Interfaces for customer operations | |
| Audio recording - Minidisc system | |
| Audio, video and related equipment - Determination of power consumption - Part 4: Video recording equipment | |
| Audio, video and related equipment - Determination of power consumption - Part 5: Set top boxes (STB) | |
| Audio, video and related equipment - Determination of power consumption - Part 6: Audio equipment | |
| Audio, video, and related equipment - Determination of power consumption - Part 1: General | |
| Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media | |
| Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets | |
| Audio/video, information and communication technology equipment - Environmentally conscious design | |
| Audiovisual systems - Interactive text transmission system (ITTS) | |
| Automatic test systems for battery powered emergency escape lighting | |
| Balance-of-system components for photovoltaic systems \x96 Design qualification natural environments | |
| Broadcast digital video tape recorders - Identification method for recording and/or reproduction error status | |
| Cable cleats for electrical installations | |
| Communication network dependability engineering | |
| Communication networks and systems for power utility automation - Part 10: Conformance testing | |
| Communication networks and systems for power utility automation - Part 4: System and project management | |
| Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models | |
| Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models | |
| Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) | |
| Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes | |
| Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control | |
| Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes | |
| Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 | |
| Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 | |
| Communication networks and systems for power utility automation \x96 Part 4: System and project management | |
| Communication networks and systems for power utility automation \x96 Part 5: Communication requirements for functions and device models | |
| Communication networks and systems for power utility automation \x96 Part 6: Configuration description language for communication in electrical substations related to IEDs | |
| Communication networks and systems for power utility automation \x96 Part 6: Configuration description language for communication in in power utility automation systems related to IEDs | |
| Communication networks and systems for power utility automation \x96 Part 7-2: Basic information and communication structure \x96 Abstract communication service interface (ACSI) | |
| Communication networks and systems for power utility automation \x96 Part 7-3: Basic communication structure \x96 Common data classes | |
| Communication networks and systems for power utility automation \x96 Part 7-420: Basic communication structure \x96 Distributed energy resources logical nodes | |
| Communication networks and systems for power utility automation \x96 Part 7-4: Basic communication structure \x96 Compatible logical node classes and data object classes | |
| Communication networks and systems for power utility automation \x96 Part 8-1: Specific communication service mapping (SCSM) \x96 Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 | |
| Communication networks and systems for power utility automation \x96 Part 9-2: Specific communication service mapping (SCSM) \x96 Sampled values over ISO/IEC 8802-3 | |
| Communication networks and systems in substations \x96 Part 3: General requirements | |
| Connectors - Safety requirements and tests | |
| Consumer audio/video equipment - Digital interface - Part 1: General | |
| Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission | |
| Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission | |
| Consumer audio/video equipment - Digital interface - Part 7: Transmission of ITU-R BO.1294 System B | |
| Consumer audio/video equipment - Digital interface -- Part 8: Transmission of ITU-R BT.601 style digital video data | |
| Consumer audio/video equipment \x96 Digital interface \x96 Part 6: Audio and music data transmission | |
| Continuous handling equipment and systems \x96 Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors | |
| Continuous handling equipment and systems \x96 Safety and EMC requirements for equipment for mechanical handling of unit loads | |
| Continuous handling equipment and systems \x96 Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers | |
| Continuous handling equipment and systems \x96 Safety requirements for equipment for mechanical handling of unit loads | |
| Continuous handling equipment and systems \x96 Safety requirements for fixed belt conveyors for bulk materials | |
| Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification | |
| Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level | |
| Cores made of soft magnetic materials \x96 Measuring methods \x96 Part 2: Magnetic properties at low excitation level | |
| Cores made of soft magnetic materials \x96 Measuring methods \x96 Part 3: Magnetic properties at high excitation level | |
| Crystalline silicon photovoltaic (PV) array \x96 On-site measurement of I-V characteristics | |
| Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS) | |
| Determination of power losses in high-voltage direct current (HVDC) convertor stations | |
| Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements | |
| Devices for the connection of luminaires for household and similar purposes \x96 Part 1: General requirements | |
| Devices for the connection of luminaires for household and similar purposes \x96 Part 2: Standard sheets for DCL | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its extensions in LATM/LOAS | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 12: Non-linear PCM bitstreams according to the DRA formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 1: General | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 4: Non-linear PCM bitstreams according to the MPEG Audio format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s) | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM bitstreams according to the MAT format | |
| Digital audio \x96 Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 \x96 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4) | |
| Discharge lamps (excluding fluorescent lamps) - Safety specifications | |
| Discharge lamps (excluding fluorescent lamps) \x96 Safety specifications | |
| Electric vehicle conductive charging system - Part 1: General requirements | |
| Electric vehicle conductive charging system \x96 Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply | |
| Electric vehicle conductive charging system \x96 Part 21: Electric vehicles requirements for conductive connection to an A.C./D.C. supply | |
| Electric vehicle conductive charging system \x96 Part 22: A.C. electric vehicle charging station | |
| Electric vehicle conductive charging system \x96 Part 23: DC electric vehicle charging station | |
| Electric vehicle conductive charging system \x96 Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging | |
| Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units | |
| Electrical accessories \x96 Residual current monitors for household and similar uses (RCMs) | |
| Electrical installations for lighting and beaconing of aerodromes - AGL series transformers | |
| Electrical installations for lighting and beaconing of aerodromes - Constant current regulators | |
| Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits | |
| Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications | |
| Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS) | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS | |
| Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS | |
| Electrical insulation systems \x96 Procedures for thermal evaluation \x96 Part 31: Applications with a designed life of 5 000 h or less | |
| Electrical insulation systems \x96 Thermal evaluation of modifications to an established electrical insulation system (EIS) \x96 Part 1: Wire-wound winding EIS | |
| Electricity metering (a.c.) \x96 Tariff and load control -- Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (a.c.) \x96 Tariff and load control -- Part 21: Particular requirements for time switches | |
| Electricity metering (a.c.) \x96 Tariff and load control \x96 Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (AC) \x96 Tariff and load control \x96 Part 21: Particular requirements for time switches | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange | |
| Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol | |
| Electricity metering \x96 Payment systems -- Part 31: Particular requirements \x96 Static payment meters for active energy (classes 1 and 2) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-3: Communication profile for PLC S-FSK neighbourhood networks | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 3-1: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 4-7: DLMS/COSEM transport layer for IP networks | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 6-2: COSEM interface classes | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 7-5: Local data transmission profiles for Local Networks (LN) | |
| Electricity metering data exchange \x96 The DLMS/COSEM suite \x96 Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) | |
| Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements | |
| Electricity metering equipment (a.c.) \x96 Acceptance inspection \x96 Part 11: General acceptance inspection methods | |
| Electricity metering equipment (a.c.) \x96 Acceptance inspection \x96 Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) | |
| Electricity metering equipment (a.c.) \x96 Acceptance inspection \x96 Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A,... | |
| Electricity metering equipment (a.c.) \x96 General requirements, tests and test conditions \x96 Part 11: Metering equipment | |
| Electricity metering equipment (a.c.) \x96 General requirements, tests and test conditions \x96 Part 21: Tariff and load control equipment | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 21: Static meters for active energy (classes 1 and 2) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 22: Static meters for active energy (classes 0,2 and 0,5) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment (a.c.) \x96 Particular requirements \x96 Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) | |
| Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols | |
| Electricity metering equipment (AC) \x96 General requirements, tests and test conditions \x96 Part 11: Metering equipment | |
| Electricity metering equipment (AC) \x96 General requirements, tests and test conditions \x96 Part 21: Tariff and load control equipment | |
| Electricity metering equipment (AC) \x96 General requirements, tests and test conditions \x96 Part 31: Product safety requirements and tests | |
| Electricity metering equipment - Dependability - Part 41: Reliability prediction | |
| Electricity metering equipment - Dependability -- Part 31-1: Accelerated reliability testing - Elevated temperature and humidity | |
| Electricity metering equipment \x96 Dependability \x96 Part 32-1: Durability \x96 Testing of the stability of metrological characteristics by applying elevated temperature | |
| Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts | |
| Electromechanical elementary relays - Part 7: Test and measurement procedures | |
| Electromechanical elementary relays \x96 Part 1: General and safety requirements | |
| Electromechanical elementary relays \x96 Part 1: General requirements | |
| Electromechanical elementary relays \x96 Part 2-1: Reliability \x96 Procedure for the verification of B10 values | |
| Electromechanical elementary relays \x96 Part 2: Reliability | |
| Electromechanical non-specified time all-or-nothing relays of assessed quality \x96 Part 1: Generic specification | |
| Electronic design automation libraries - Part 1: Input/Output buffer information specifications (IBIS Version 3.2) | |
| Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors | |
| Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors | |
| Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements | |
| Energy management system application program interface (EMS-API) - Part 301: Common Information Model (CIM) Base | |
| Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile | |
| Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema | |
| Energy management system application program interface (EMS-API) \x96 Part 452: CIM model exchange specification | |
| Energy management system application program interface (EMS-API) \x96 Part 453: Diagram layout profile | |
| Energy management system application program interface (EMS-API) \x96 Part 456: Solved power system state profiles | |
| Energy Management System Application Program Interface (EMS-API) \x96 Part 552: CIMXML Model Exchange Format | |
| Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic circulators \x96 Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic filters \x96 Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Fibre optic passive chromatic dispersion compensators \x96 Part 1: Generic specification | |
| Function blocks (FB) for process control \x96 Part 2: Specification of FB concept | |
| Function Blocks (FB) for process control \x96 Part 3: Electronic Device Description Language (EDDL) | |
| Function blocks (FB) for process control and Electronic Device Description Language (EDDL) \x96 Part 4: EDD interpretation | |
| Function blocks (FB) for process control and Electronic Device Description Language (EDDL) \x96 Part 5: EDDL Builtin library | |
| Hazard and operability studies (HAZOP studies) \x96 Application guide | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format | |
| Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format | |
| Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5 | |
| High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment | |
| High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 1: Nanohenry range chip inductor | |
| High frequency inductive components \x96 Electrical characteristics and measuring methods \x96 Part 2: Rated current of inductors for DC to DC converters | |
| High frequency inductive components \x96 Non-electrical characteristics and measuring methods \x96 Part 2: Test methods for non-electrical characteristics | |
| High-frequency induction heating installations - Test methods for the determination of power output of the generator | |
| High-voltage direct current (HVDC) installations - System tests | |
| High-voltage direct current (HVDC) installations \x96 System tests | |
| Household electrical hair care appliances \x96 Methods of measuring the performance | |
| Household portable appliances for cooking, grilling and similar use \x96 Methods for measuring performance | |
| Hydraulic machines - Acceptance tests of small hydroelectric installations | |
| Hydraulic machines, radial and axial \x96 Performance conversion method from model to prototype | |
| Indicator light units for household and similar fixed-electrical installations \x96 Part 1: General requirements | |
| Industrial communication networks - Installation of communication networks in industrial premises | |
| Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 | |
| Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 | |
| Industrial communication networks - Profiles - Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 | |
| Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 | |
| Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 | |
| Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 | |
| Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 | |
| Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 | |
| Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 | |
| Industrial communication networks \x96 Profiles \x96 Part 3: Functional safety fieldbuses \x96 General rules and profile definitions | |
| Industrial communication networks \x96 Profiles \x96 Part 5-12: Installation of fieldbuses \x96 Installation profiles for CPF 12 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-18: Installation of fieldbuses \x96 Installation profiles for CPF 18 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-19: Installation of fieldbuses \x96 Installation profiles for CPF 19 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-2: Installation of fieldbuses \x96 Installation profiles for CPF 2 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-3: Installation of fieldbuses \x96 Installation profiles for CPF 3 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-6: Installation of fieldbuses \x96 Installation profiles for CPF 6 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-8: Installation of fieldbuses \x96 Installation profiles for CPF 8 | |
| Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange -... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in -process equipment catalogues \x96 Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange \x96 Generic structures... | |
| Industrial-process Measurement and Control \x96 Data Structures and Elements in Process Equipment Catalogues \x96 Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 1: Measuring equipment with analogue and digital output | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange | |
| Industrial-process measurement and control \x96 Data structures and elements in process equipment catalogues \x96 Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange | |
| Infrared free air applications | |
| Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles | |
| Instrument transformers \x96 Part 1: General requirements | |
| Instrument transformers \x96 Part 2: Additional requirements for current transformers | |
| Instrument transformers \x96 Part 3: Additional requirements for inductive voltage transformers | |
| Instrument transformers \x96 Part 4: Additional requirements for combined transformers | |
| Instrument transformers \x96 Part 5: Additional requirements for capacitor voltage transformers | |
| Instrument transformers \x96 Part 6: Additional general requirements for low-power instrument transformers | |
| Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration | |
| Insulating liquids - Determination of acidity - Part 2: Colourimetric titration | |
| Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils | |
| Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials -... | |
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based upon thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements... | |
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test | |
| Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria | |
| Integrated circuits - Manufacturing line approval application guideline | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz - 1 GHz - Part 5: Measurement of conducted emission - Workbench Faraday Cage method | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz - 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method | |
| Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method | |
| Integrated circuits - Memory devices pin configurations | |
| Integrated circuits \x96 Measurement of electromagnetic emissions \x96 Part 8: Measurement of radiated emissions \x96 IC stripline method | |
| Integrated circuits \x96 Measurement of electromagnetic emissions, 150 kHz to 1 GHz \x96 Part 1: General conditions and definitions | |
| Integrated circuits \x96 Measurement of electromagnetic emissions, 150 kHz to 1 GHz \x96 Part 4: Measurement of conducted emissions \x96 1 ohm/150 ohm direct coupling method | |
| LED modules for general lighting \x96 Safety specifications | |
| Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles | |
| Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 2: Actuator sensor interface (AS-i) | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 3: DeviceNet | |
| Low-voltage switchgear and controlgear \x96 Controller-device interfaces (CDIs) \x96 Part 7: CompoNet | |
| Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Part 1: Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques - Operational and performance requirements, methods of testing... | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test... | |
| Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Automatic Identification Systems (AIS) \x96 Part 2: Class A shipborne equipment of the automatic identification system (AIS) \x96 Operational and performance requirements,... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Integrated navigation systems \x96 Part 2: Modular structure for INS \x96 Operational and performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Shipborne voyage data recorder (VDR) \x96 Part 1: Performance requirements, methods of testing and required test results | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments... | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings \x96 Part 1: Requirements for measuring instruments... | |
| Measuring method for the level of intermodulation products generated in a gyromagnetic device | |
| Mechanical safety of cathode ray tubes | |
| Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions | |
| Mechanical structures for electronic equipment \x96 Outdoor enclosures \x96 Part 1: Design guidelines | |
| Mechanical structures for electronic equipment \x96 Outdoor enclosures \x96 Part 3: Environmental requirements, tests and safety aspects | |
| Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy | |
| Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems | |
| Methods of measurement for the power consumption of audio, video and related equipment | |
| Microphones and earphones for speech communications | |
| Microwave ferrite components - Measuring methods for major properties | |
| Mineral insulating oils - Determination of kinematic viscosity at very low temperatures | |
| Mobile and portable DVB-T/H radio access - Part 1: Interface specification | |
| Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing | |
| Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification | |
| Multimedia systems \x96 Guide to the recommended characteristics of analogue interfaces to achieve interoperability | |
| Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID) | |
| Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB | |
| Multimedia systems and equipment - Colour measurement and management - Part 2-2: Colour management - Extended RGB colour space - scRGB | |
| Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC | |
| Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB | |
| Multimedia systems and equipment - Colour measurement and management - Part 3: Equipment using cathode ray tubes | |
| Multimedia systems and equipment - Colour measurement and management - Part 4: Equipment using liquid crystal display panels | |
| Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels | |
| Multimedia systems and equipment - Colour measurement and management - Part 6: Front projection displays | |
| Multimedia systems and equipment - Colour measurement and management - Part 7-1: Colour printers - Reflective prints - RGB inputs | |
| Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners | |
| Multimedia systems and equipment - Colour measurement and management - Part 9: Digital cameras | |
| Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server | |
| Multimedia systems and equipment \x96 Colour measurement and management \x96 Part 12-2: Simple metadata format for identification of colour gamut | |
| Multimedia systems and equipment \x96 Colour measurement and management \x96 Part 2-4: Colour management \x96 Extended-gamut YCC colour space for video applications \x96 xvYCC | |
| Nuclear power plants - Design of control rooms - Functional analysis and assignment | |
| Overhead lines \x96 Requirements and tests for spacers | |
| Overhead lines \x96 Requirements and tests for Stockbridge type aeolian vibration dampers | |
| Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 1: General requirements and measuring methods | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 2: Measurement of passive intermodulation in coaxial cable assemblies | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 3: Measurement of passive intermodulation in coaxial connectors | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 5: Measurement of passive intermodulation in filters | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 6: Measurement of passive intermodulation in antennas | |
| Performance characteristics and calibration methods for digital data acquisition systems and relevant software | |
| Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating | |
| Photovoltaic (PV) module performance testing and energy rating \x96 Part 2: Spectral responsivity, incidence angle and module operating temperature measurements | |
| Plasma display panels - Part 1: Terminology and letter symbols | |
| Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical | |
| Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation | |
| Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts | |
| Plasma display panels - Part 2-5: Measuring methods - Acoustic noise | |
| Plasma display panels - Part 3-1: Mechanical interface | |
| Plasma display panels - Part 3-2: Interface - Electrical interface | |
| Plasma display panels - Part 4: Climatic and mechanical testing methods | |
| Plasma display panels - Part 5: Generic specification | |
| Power capacitors \x96 Low-voltage power factor correction banks | |
| Power consumption of information technology equipment - Measurement methods | |
| Power installations exceeding 1 kV a.c. - Part 1: Common rules | |
| Power installations exceeding 1 kV a.c. \x96 Part 1: Common rules | |
| Preparation of object lists, including parts lists | |
| Product package labels for electronic components using bar code and two-dimensional symbologies | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non solid electrolyte | |
| Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors | |
| Railway applications \x96 Rolling stock equipment \x96 Capacitors for power electronics -- Part 3: Electric double-layer capacitors | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and... | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: General specifications | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 2: SD format for 525-60 and... | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 3: HD format for 1125-60 and... | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents... | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 5: The character information system | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 6: SDL format | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 7: EDTV2 format | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 8: PALplus format for the 625-50... | |
| Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 9: DVB format | |
| Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions | |
| Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity; steady state | |
| Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components | |
| Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening | |
| Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling | |
| Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | |
| Safety of machinery \x96 Functional safety of safety-related electrical, Electronic and programmable electronic control systems | |
| Safety of transformers, reactors, power supply units and combinations thereof \x96 EMC requirements | |
| Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules | |
| Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests | |
| Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters | |
| Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test | |
| Secondary batteries for the propulsion of electric road vehicles - Part 3: Performance and life testing (traffic compatible, urban use vehicles) | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Portable sealed rechargeable single cells \x96 Part 1: Nickel-cadmium | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Secondary lithium cells and batteries for portable applications \x96 Part 3: Prismatic and cylindrical lithium secondary cells, and batteries... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Secondary sealed cells and batteries for portable applications \x96 Part 1: Nickel-cadmium | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Secondary sealed cells and batteries for portable applications \x96 Part 2: Nickel-metal hydride | |
| Semiconductor devices - Micro-electromechani cal devices - Part 10: Micro-pillar compression test for MEMS materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechani cal systems | |
| Semiconductor devices - Micro-electromechani cal devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 14: Forming limit measuring method of metallic film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 15: Test method of bonding strength between PDMS and glass | |
| Semiconductor devices - Micro-electromechani cal devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods | |
| Semiconductor devices - Micro-electromechani cal devices - Part 17: Bulge test method for measuring mechanical properties of thin films | |
| Semiconductor devices - Micro-electromechani cal devices - Part 18: Bend testing methods of thin film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 19: Electronic compasses | |
| Semiconductor devices - Micro-electromechani cal devices - Part 20: Gyroscopes | |
| Semiconductor devices - Micro-electromechani cal devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates | |
| Semiconductor devices - Micro-electromechani cal devices - Part 2: Tensile testing method of thin film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 3: Thin film standard test piece for tensile testing | |
| Semiconductor devices - Micro-electromechani cal devices - Part 4: Generic specification for MEMS | |
| Semiconductor devices - Micro-electromechani cal devices - Part 5: RF MEMS switches | |
| Semiconductor devices - Micro-electromechani cal devices - Part 6: Axial fatigue testing methods of thin film materials | |
| Semiconductor devices - Micro-electromechani cal devices - Part 7: MEMS BAW filter and duplexer for radio frequency control and selection | |
| Semiconductor devices - Micro-electromechani cal devices - Part 8: Strip bending test method for tensile property measurement of thin films | |
| Semiconductor devices - Micro-electromechani cal devices - Part 9: Wafer to wafer bonding strength measurement for MEMS | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 1: Terms and definitions | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 25: Silicon based MEMS fabrication technology \x96 Measurement method of pull-press and shearing strength of micro bonding area | |
| Semiconductor devices \x96 Micro-electromechani cal devices \x96 Part 26: Description and measurement methods for micro trench and needle structures | |
| Semiconductor optoelectronic devices for fibre optic system applications \x96 Part 1: Specification template for essential ratings and characteristics | |
| Semiconductor optoelectronic devices for fibre optic system applications \x96 Part 2: Measuring methods | |
| Sound signalling devices for household and similar purposes | |
| Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173 | |
| Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards | |
| Specified time relays for industrial use - Part 1: Requirements and tests | |
| Static VAR compensators (SVC) \x96 Testing of thyristor valves | |
| Structuring of technical information and documentation | |
| Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method | |
| Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires | |
| Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites | |
| Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices | |
| Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies | |
| Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies | |
| Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors | |
| Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors | |
| Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors | |
| Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance | |
| Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors | |
| Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors | |
| Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires | |
| Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors | |
| Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup... | |
| Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors | |
| Superconductivity \x96 Part 17: Electronic characteristic measurements \x96 Local critical current density and its distribution in large-area superconducting films | |
| Superconductivity \x96 Part 22-1: Superconducting electronic devices \x96 Generic specification for sensors and detectors | |
| Superconductivity \x96 Part 4: Residual resistance ratio measurement \x96 Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors | |
| Superconductivity \x96 Part 7: Electronic characteristic measurements \x96 Surface resistance of superconductors at microwave frequencies | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures | |
| Surface mounted piezoelectric devices for frequency control and selection \x96 Standard outlines and terminal lead connections \x96 Part 2: Ceramic enclosures | |
| Surface mounted piezoelectric devices for frequency control and selection \x96 Standard outlines and terminal lead connections \x96 Part 4: Hybrid enclosure outlines | |
| Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards | |
| Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications | |
| Thermal-resistant aluminium alloy wire for overhead line conductor | |
| Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores | |
| Ultrasonics - Pressure pulse lithotripters - Characteristics of fields | |
| Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics | |
| Ultrasonics \x96 Focusing transducers \x96 Definitions and measurement methods for the transmitted fields | |
| Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting | |
| Uninterruptible power systems (UPS) \x96 Part 1: General and safety requirements for UPS | |
| Uninterruptible power systems (UPS) \x96 Part 2: Electromagnetic compatibility (EMC) requirements | |
| Uninterruptible power systems (UPS) \x96 Part 3: Method of specifying the performance and test requirements | |
| Uninterruptible power systems (UPS) \x96 Part 5-3: DC output UPS \x96 Performance and test requirements | |
| Video recording - Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape and incorporating data compression - (Format digital-L) |
| << Prev | Next >> |