Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
610
620
630
640
650
660
665
666
667
668
669
670
671
672
673
674
675
676
677
680
690
700
710
720
730
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| 3D Display devices - Part 1-2: Generic - Terminology and letter symbols | |
| 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical | |
| AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation | |
| Accessibility terms and definitions | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) | |
| Advanced technical ceramics \x96 Mechanical properties of ceramic composites at room temperature \x96 Part 3: Determination of flexural strength | |
| Advanced technical ceramics \x96 Mechanical properties of ceramic composites at room temperature \x96 Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens | |
| Aerospace series \x96 Configuration \x96 Definition and designation for product standards for externally threaded fasteners | |
| Agricultural and forestry machinery \x96 Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) \x96 Safety | |
| Agricultural machinery \x96 Manure spreaders \x96 Safety | |
| Agricultural machinery \x96 Safety \x96 Silage loading, mixing and/or chopping and distributing machines | |
| Agricultural machinery \x96 Silage loading, mixing and/or chopping and distributing machines \x96 Safety | |
| Agricultural machinery \x96 Slurry tankers \x96 Safety | |
| Agricultural machinery \x96 Vine shoot tipping machines \x96 Safety | |
| Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form | |
| Aluminium and aluminium alloys \x96 Finstock \x96 Part 2: Mechanical properties | |
| Analysis techniques for dependability - Event tree analysis (ETA) | |
| Analysis techniques for dependability - Petri net techniques | |
| Articulated systems and flexible systems for cable guiding | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields | |
| Audio Archive System \x96 Part 1-1: DVD disk and data migration for long term audio data storage | |
| Audio reproduction method for normalized loudness level | |
| Audio, video and information technology equipment - Routine electrical safety testing in production | |
| Audio, video and multimedia systems - General channel assignment of multichannel audio | |
| Audio, video and multimedia systems and equipment \x96 Multimedia e-publishing and e-book technologies \x96 Raster-graphics image-based e-books | |
| Automatic forced draught burners for gaseous fuels | |
| Battery charge controllers for photovoltaic systems - Performance and functioning | |
| Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface | |
| Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing | |
| Building intercom system \x96 Part 1-2: System requirements \x96 Building intercom systems using the internet protocol (IP) | |
| Building intercom systems \x96 Part 1-1: System requirements \x96 General | |
| Calibration of tuneable laser sources | |
| Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | |
| Cement-bonded particleboards - Definition and classification | |
| Cement-bonded particleboards - Specification - Part 1: General requirements | |
| Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions | |
| Cleaning robots for household use \x96 Dry cleaning: Methods of measuring performance | |
| Common requirements for concrete pressure pipes including joints and fittings | |
| Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V- Definitions, test methods and acceptance criteria... | |
| Computation of waveform Parameter uncertainties | |
| Concentrator photovoltaic (CPV) modules \x96 Thermal cycling test to differentiate increased thermal fatigue durability | |
| Connectors for DC-application in photovoltaic systems - Safety requirements and tests | |
| Connectors for DC-application in photovoltaic systems \x96 Safety requirements and tests | |
| Consumer terminal function for access to IPTV and open internet multimedia services \x96 Part 2-1: Media formats | |
| Consumer terminal function for access to IPTV and open internet multimedia services \x96 Part 2-2: HTTP adaptive streaming | |
| Consumer terminal function for access to IPTV and open internet multimedia services \x96 Part 3: Content metadata | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes \x96 Part 1: General principles and requirements | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes \x96 Part 2: System aspects | |
| Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods | |
| Demonstration of dependability requirements - The dependability case | |
| Desktop and notebook computers \x96 Measurement of energy consumption | |
| Determination of the compressive strength of autoclaved aerated concrete | |
| Determination of the dry density of autoclaved aerated concrete | |
| Determination of the drying shrinkage of autoclaved aerated concrete | |
| Device embedded substrate - Part 1-1: Generic specification - Test methods | |
| Dielectric and resistive properties of solid insulating materials - Part 1: General | |
| Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity | |
| Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance | |
| Dielectric and resistive properties of solid insulating materials \x96 Part 3-1: Determination of resistive properties (DC methods) \x96 Volume resistance and volume resistivity \x96 General method | |
| Digital audiobook file format and player requirements | |
| Digital load side transmission lighting control - Part 1: Basic requirements | |
| Digital terrestrial television receivers for the DTMB system | |
| Digital video interface \x96 Gigabit video interface for multimedia systems | |
| Document kinds for Electrical and Instrumentation Projects in the Process Industry | |
| Double-capped LED lamps designed to retrofit linear fluorescent lamps \x96 Safety specifications | |
| Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber | |
| Elastomeric seals \x96 Material requirements for pipe joint seals used in water and drainage applications \x96 4: Cast polyurethane sealing elements | |
| Elastomeric seals \x96 Material requirements for pipe joint seals used in water and drainage applications \x96 Part 1: Vulcanized rubber | |
| Elastomeric seals \x96 Material requirements for pipe joint seals used in water and drainage applications \x96 Part 2: Thermoplastic elastomers | |
| Elastomeric seals \x96 Material requirements for pipe joint seals used in water and drainage applications \x96 Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric seals \x96 Material requirements for pipe joint seals used in water and drainage applications \x96 Part 4: Cast polyurethane sealing elements | |
| Elastomeric seals \x96 Material requirements for pipe joints seals used in water and drainage applications \x96 Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric seals \x96 Materials requirements for pipe joint seals used in water and drainage applications \x96 Part 1: Vulcanized rubber | |
| Elastomeric seals \x96 Materials requirements for pipe joint seals used in water and drainage applications \x96 Part 2: Thermoplastic elastomers | |
| Elastomeric seals \x96 Materials requirements for pipe joints seals used in water and drainage applications \x96 Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric Seals \x96 Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids | |
| Electric double-layer capacitors for use in hybrid electric vehicles \x96 Test methods for electrical characteristics | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 1: General requirements | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-10: Particular requirements for hand-held mixers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-17: Particular requirements for hand-held routers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-1: Particular requirements for hand-held drills and impact drills | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-21: Particular requirements for hand-held drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-5: Particular requirements for hand-held circular saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-8: Particular requirements for hand-held shears and nibblers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-12: Particular requirements for transportable threading machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-14: Particular requirements for transportable drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-1: Particular requirements for transportable table saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-4: Particular requirements for transportable bench grinders | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery \x96 Safety \x96 Part 3-6: Particular requirements for transportable diamond drills with liquid system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-9: Particular requirements for transportable mitre saws | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery \x96 Safety \x96 Part 4-1: Particular requirements for chain saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-2: Particular requirements for hedge trimmers | |
| Electric welding equipment \x96 Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) \x96 Part 2: Arc welding equipment | |
| Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter | |
| Electroacoustics \x96 Audio-frequency induction loop systems for assisted hearing \x96 Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics \x96 Audio-frequency induction loop systems for assisted hearing \x96 Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines... | |
| Electrolyte and water for vented lead acid accumulators \x96 Part 1: Requirements for electrolyte | |
| Electrolyte and water for vented lead acid accumulators \x96 Part 2: Requirements for water | |
| Electronic railway equipment - On board driving data recording system - Part 1: System specification | |
| Electronic railway equipment \x96 On board driving data recording system \x96 Part 1: System specification | |
| Electronic railway equipment \x96 On board driving data recording system \x96 Part 2: Conformity testing | |
| Electronic railway equipment \x96 On-board multimedia and telematic subsystems for railways \x96 Part 1: General architecture | |
| Engineering data exchange format for use in industrial automation systems engineering \x96 Automation markup language \x96 Part 2: Role class libraries | |
| Engineering data exchange format for use in industrial automation systems engineering \x96 Automation markup language \x96 Part 3: Geometry and kinematics | |
| Engineering data exchange format for use in industrial automation systems engineering \x96 Part 1: Architecture and General Requirements | |
| Environmental standardization for electrical and electronic products and systems - Glossary of terms | |
| ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment | |
| ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment | |
| Event video data recorder for road vehicle accidents \x96 Part 1: Basic requirements | |
| Expression of performance of fluorometric oxygen analyzers in liquid media | |
| Fibre optic active components and devices \x96 Reliability standards \x96 Part 3: Laser modules used for telecommunication | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre | |
| Fibre optics - Launch condition requirements for measuring multimode attenuation | |
| Field Device Integration (FDI) \x96 Part 101-1: Profiles \x96 Foundation Fieldbus H1 | |
| Field Device Integration (FDI) \x96 Part 101-2: Profiles \x96 Foundation Fieldbus HSE | |
| Field Device Integration (FDI) \x96 Part 103-1: Profiles \x96 PROFIBUS | |
| Field Device Integration (FDI) \x96 Part 103-4: Profiles \x96 PROFINET | |
| Field Device Integration (FDI) \x96 Part 109-1: Profiles \x96 HART\xae and WirelessHART\xae | |
| Field device integration (FDI) \x96 Part 1: Overview | |
| Field Device Integration (FDI) \x96 Part 2: FDI Client | |
| Field Device Integration (FDI) \x96 Part 3: FDI Server | |
| Field Device Integration (FDI) \x96 Part 4: FDI Packages | |
| Field Device Integration (FDI) \x96 Part 5: FDI Information Model | |
| Field Device Integration (FDI) \x96 Part 6: FDI Technology Mapping | |
| Field Device Integration (FDI) \x96 Part 7: FDI Communication Devices | |
| File allocation system with minimized reallocation for multimedia home server (TA 8) | |
| Fire-fighting hoses - Semi-rigid hoses for fixed systems | |
| Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose | |
| Fixed firefighting systems \x96 Hose systems \x96 Part 1: Hose reels with semi-rigid hose | |
| Fixed firefighting systems \x96 Hose systems \x96 Part 2: Hose systems with lay-flat hose | |
| Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears | |
| Fluids for electrotechnical applications \x96 Unused natural esters for transformers and similar electrical equipment | |
| Fluorescent induction lamps - Performance specification | |
| Fluorescent induction lamps \x96 Safety specifications | |
| Forced draught burners for gaseous fuels | |
| Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW | |
| Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW | |
| Gas-fired central heating boilers \x96 Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW | |
| Gas-fired central heating boilers \x96 Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW | |
| General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions | |
| General lighting \x96 Light emitting diode (LED) products and related equipment \x96 Terms and definitions | |
| General requirements for arc fault detection devices | |
| Generic specification of information on products by properties \x96 Part 1: Principles and method | |
| Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method | |
| Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method | |
| Glass in building - Determination of thermal transmittance (U-value) - Calculation method | |
| Guidance on human aspects of dependability | |
| Guidance on software aspects of dependability | |
| Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) | |
| High Definiton (HD) recording link guidelines | |
| High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements | |
| Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume | |
| Household refrigerating appliances \x96 Characteristics and test methods | |
| Identification and communication interoperability method for external power supplies used with portable computing devices | |
| Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods | |
| In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | |
| Industrial communication networks - Wireless communication network and communication profiles - WirelessHART(TM) | |
| Industrial communication networks - Wireless communication networks - Part 2: Coexistence management | |
| Industrial communication networks \x96 Wireless communication network and communication profiles \x96 WirelessHART\x99 | |
| Industrial communication networks \x96 Wireless communication networks \x96 Part 1: Wireless communication requirements and spectrum considerations | |
| Industrial communication networks \x96 Wireless communication networks \x96 Part 2: Coexistence management | |
| Industrial electroheating equipment - Test methods for infrared emitters | |
| Industrial electroheating installations - Test methods for infrared electroheating installations | |
| Industrial networks - Wireless communication network and communication profiles - ISA 100.11a | |
| Industrial networks \x96 Wireless communication network and communication profiles \x96 WIA-FA | |
| Industrial networks \x96 Wireless communication network and communication profiles \x96 WIA-PA | |
| Industrial systems, installations and equipment and industrial products - Labelling of cables and cores | |
| Inland navigation vessels \x96 Railings for decks and side decks \x96 Requirements, designs and types | |
| Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil | |
| Interface for loudspeakers with digital input signals based on IEC 60958 | |
| Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Junction boxes for photovoltaic modules \x96 Safety requirements and tests | |
| Kitchen sinks - Connecting dimensions | |
| LCD backlight unit - Part 1-1: Generic specification | |
| LCD backlight unit - Part 1-2: Terminology and letter symbols | |
| LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit | |
| LED modules for general lighting \x96 Performance requirements | |
| LED-binning - Part 1: General requirements and white colour grid | |
| LED-binning \x96 Part 1: General requirements and white colour grid intended for automotive applications | |
| LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications | |
| LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. \x96 Safety specifications | |
| Lightning density based on lightning location systems (LLS) \x96 General principles | |
| Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes | |
| Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps | |
| Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) | |
| Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds | |
| Lightning Protection System Components (LPSC) \x96 Part 1: Requirements for connection components | |
| Lightning protection system components (LPSC) \x96 Part 4: Requirements for conductor fasteners | |
| Lightning protection system components (LPSC) \x96 Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lithium ion capacitors for use in electric and electronic equipment \x96 Test methods for electrical characteristics | |
| Low-voltage switchgear and controlgear \x96 Product data and properties for information exchange \x96 Part 1: Catalogue data | |
| Low-voltage switchgear and controlgear \x96 Product data and properties for information exchange | |
| Low-voltage switchgear and controlgear enclosed equipment \x96 Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work | |
| Luminaire performance \x96 Part 1: General requirements | |
| Luminaire performance \x96 Part 2-1: Particular requirements for LED luminaires | |
| Machine tools \x96 Mechanical presses \x96 Safety | |
| Machine tools \x96 Safety \x96 Hydraulic presses | |
| Management of alarms systems for the process industries | |
| Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements | |
| Maritime navigation and radiocommunication equipment and systems \x96 Integrated communication system (ICS) \x96 Operational and performance requirements, methods of testing and required test results | |
| Materials and articles in contact with foodstuffs - Catering containers - Part 1: Dimensions of containers | |
| Materials and articles in contact with foodstuffs - Catering containers - Part 2: Dimensions of accessories and supports | |
| Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) Systems | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-2: Encapsulants \x96 Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-4: Encapsulants \x96 Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength... | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-5: Encapsulants \x96 Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-6: Encapsulants \x96 Test methods for determining the degree of cure in Ethylene-Vinyl Acetate | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators \x96 Part 1: Basic methods for the measurement | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators \x96 Part 2: Phase jitter measurement method | |
| Mechanical structures for electrical and electronic equipment \x96 Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series \x96 Part 5: Cooling performance evaluation for indoor cabinets... | |
| Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers... | |
| Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography | |
| Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods | |
| Medical electrical equipment \x96 Medical image display systems \x96 Part 1: Evaluation methods | |
| Method for measuring photovoltaic (PV) glass \x96 Part 1: Measurement of total haze and spectral distribution of haze | |
| Method for measuring photovoltaic (PV) glass \x96 Part 2: Measurement of transmittance and reflectance | |
| Methodology for communication network dependability assessment and assurance | |
| Methods for product accelerated testing | |
| Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission network | |
| Methods of measuring performances of electric hair clippers or trimmers for household use | |
| MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) | |
| Monitoring and measuring systems used for data collection, gathering and analysis \x96 Part 1: Device requirements | |
| Multimedia gateway in home networks \x96 Guidelines | |
| Multimedia home server systems - Rights information interoperability for IPTV | |
| Multimedia quality - Method of assessment of synchronization of audio and video | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture map for auditory presentation of printed texts | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory presentation of printed texts | |
| Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency | |
| Nuclear instrumentation - Constructional requirements and classification of radiometric gauges | |
| Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions | |
| Nuclear power plants \x96 Instrumentation and control systems important to safety \x96 Design and qualification of isolation devices | |
| Nuclear powers plants \x96 Instrumentation and control important to safety \x96 Management of ageing of sensors and transmitters \x96 Part 1: Pressure transmitters | |
| OPC unified architecture - Part 100: Device Interface | |
| OPC unified architecture \x96 Part 10: Programs | |
| OPC unified architecture \x96 Part 11: Historical Access | |
| OPC unified architecture \x96 Part 13: Aggregates | |
| OPC unified architecture \x96 Part 3: Address Space Model | |
| OPC unified architecture \x96 Part 4: Services | |
| OPC unified architecture \x96 Part 5: Information model | |
| OPC unified architecture \x96 Part 6: Mappings | |
| OPC unified architecture \x96 Part 7: Profiles | |
| OPC unified architecture \x96 Part 8: Data Access | |
| OPC unified architecture \x96 Part 9: Alarms and conditions | |
| Optical circuit boards - Basic test and measurement procedures -- Part 2-4: Optical transmission test for optical circuit boards without input/output fibres | |
| Optical circuit boards - Part 1: General | |
| Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation | |
| Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards | |
| Optical circuit boards - Part 3: Performance standards - General and guidance | |
| Optical circuit boards - Part 4: Interface standards - General and guidance | |
| Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres | |
| Optical circuit boards \x96 Basic test and measurement procedures \x96 Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards | |
| Organic light emitting diode (OLED) panels for general lighting \x96 Performance Requirements | |
| Organic light emitting diode (OLED) panels for general lighting \x96 Safety requirements | |
| Overhead lines - Methods for testing self-damping characteristics of conductors | |
| Paper and board - European list of standard grades of recovered paper and board | |
| Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract | |
| Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract | |
| Paper and board intended to come into contact with foodstuffs \x96 Determination of colour fastness of dyed paper and board | |
| Paper and board intended to come into contact with foodstuffs \x96 Determination of the fastness of fluorescent whitened paper and board | |
| Particular safety requirements for equipment to be connected to information and communication networks | |
| Performance evaluation methods of mobile household robots | |
| Photovoltaic (PV) modules - Ammonia corrosion testing | |
| Photovoltaic (PV) modules \x96 Transportation testing \x96 Part 1: Transportation and shipping of module package units | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions | |
| Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement | |
| Photovoltaic concentrators (CPV) \x96 Performance testing \x96 Part 3: Performance measurements and power rating | |
| Photovoltaic module \x96 Bypass diode \x96 Thermal runaway test | |
| Photovoltaic power generating systems \x96 EMC requirements and test methods for power conversion equipment | |
| Photovoltaic systems - Design qualification of solar trackers | |
| Photovoltaic systems \x96 Design qualification of solar trackers | |
| Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method | |
| Plastics piping systems \x96 Glass reinforced thermosetting plastics (GRP) pipes and fittings \x96 Methods for regression analyses and their use | |
| Plywood - Classification by surface appearance - Part 1: General | |
| Plywood - Classification by surface appearance - Part 2: Hardwood | |
| Plywood - Classification by surface appearance - Part 3: Softwood | |
| Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects | |
| Plywood - Specifications | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems \x96 Part 1: General requirements | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems \x96 Part 2: Modular multilevel converters | |
| Power quality measurement in power supply systems \x96 Part 1: Power quality instruments (PQI) | |
| Power quality measurement in power supply systems \x96 Part 2: Functional tests and uncertainty requirements | |
| Power sources for a wireless communication device \x96 Part 1: General requirements of power modules | |
| Power sources for a wireless communication device \x96 Part 2: Profile for power modules with batteries | |
| Power sources for a wireless communication device \x96 Part 3: Generic energy harvesting adaptor module | |
| Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes | |
| Programmable components in electronic lamp controlgear - General and safety requirements | |
| Programmable components in electronic lamp controlgear \x96 General and safety requirements | |
| Protective gloves for firefighters | |
| Quality evaluation method for the sound field of directional loudspeaker array system | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material | |
| Radiation protection instrumentation \x96 Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation \x96 Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material | |
| Radio data system (RDS) \x96 Receiver products and characteristics \x96 Methods of measurement | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 2: Guidelines for the use | |
| Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters | |
| Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications \x96 Fixed installations \x96 Electric traction \x96 Specific requirements for composite insulators used for overhead contact line systems | |
| Railway applications \x96 Fixed installations \x96 Stationary energy storage system for DC traction systems | |
| Railway applications \x96 Rolling stock \x96 Power supply with onboard energy storage system \x96 Part 1: Series hybrid system | |
| Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings | |
| Reinforced concrete pressure pipes, cylinder type, including joints and fittings | |
| Representation of states of objects by graphical symbols | |
| Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses | |
| Resilient floor coverings - Determination of apparent density of agglomerated cork | |
| Resilient floor coverings - Determination of conventional pattern depth | |
| Resilient floor coverings - Determination of curling on exposure to moisture | |
| Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity | |
| Resilient floor coverings - Determination of exudation of plasticizers | |
| Resilient floor coverings - Determination of gelling | |
| Resilient floor coverings - Determination of the spreading of water | |
| Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test | |
| Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification | |
| Resilient floor coverings - Specification for corklinoleum | |
| Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification | |
| Resilient floor coverings \x96 Determination of seam strength | |
| Resilient floor coverings \x96 Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing \x96 Specification | |
| Resilient floor coverings \x96 Polyvinyl chloride floor coverings with foam layer \x96 Specification | |
| Resilient floor coverings \x96 Specification for plain and decorative linoleum on a corkment backing | |
| Resilient floor coverings \x96 Specification for plain and decorative linoleum on a foam backing | |
| Root cause analysis (RCA) | |
| Safety of machinery \x96 Requirements for cableless control systems of machinery | |
| Safety of machinery \x96 Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment | |
| Safety of woodworking machines \x96 Part 1: Common requirements | |
| Sample preparation for measurement of mercury level in fluorescent lamps | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 2: Reliability and abuse testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles \x96 Part 3: Safety requirements | |
| Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements | |
| Self-ballasted LED lamps for general lighting services with supply voltages > 50 V \x96 Performance requirements | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V \x96 Safety specifications | |
| Semiconductor devices \x96 Semiconductor devices for energy harvesting and generation \x96 Part 2: Thermo power based thermoelectric energy harvesting | |
| Semiconductor devices \x96 Semiconductor interface for human body communication \x96 Part 3: Functional type and its operational conditions | |
| Spare parts provisioning | |
| Specification for data logging and monitoring of lifts, escalators and passenger conveyors | |
| Standard practice for marking medical devices and other items for safety in the magnetic resonance environment | |
| Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels | |
| Standardized product ontology register and transfer by spreadsheets - Part 3: Interface for Common Information Model | |
| Standardized product ontology register and transfer by spreadsheets \x96 Part 5: Interface for activity description | |
| Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality \x96 Part 1: Generic specification | |
| Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance | |
| Surface cleaning appliances \x96 Floor treatment machines with or without traction drive, for commercial use \x96 Methods of measuring the performance | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 1: Basic requirement | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 2: Interactive data services using BIFS | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 3: Common API | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy \x96 Part 2: Erosion test method for metal materials with surface processing | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy \x96 Part 3: Selection guidance of erosion test methods | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) | |
| Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300kV) | |
| Text-to-speech for television \x96 General requirements | |
| Thermal spraying \x96 Terminology, classification | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) \x96 Electrical testing | |
| Transmitting equipment for radiocommunication \x96 Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems \x96 Measurement method | |
| Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems | |
| Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USB Battery Charging Specification, Revision 1.2 (TA 14) | |
| Universal serial bus interfaces for data and power - Part 1: Universal serial bus specification, revision 2.0 | |
| Universal Serial Bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) | |
| Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) | |
| Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14) | |
| Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 | |
| Universal serial bus interfaces for data and power - Part 3: USB battery charging specification, Revision 1.2 | |
| Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 | |
| Universal serial bus interfaces for data and power \x96 Part 1-2: Common components \x96 USB Power Delivery specification | |
| Universal serial bus interfaces for data and power \x96 Part 1-3: Universal Serial Bus interfaces \x96 Common components \x96 USB Type-CTM cable and connector specification | |
| Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list | |
| Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts \x96 Particular requirements | |
| Video surveillance systems for use in security applications - Part 1-1: System requirements - General | |
| Video surveillance systems for use in security applications - Part 1-2: System requirements - Performance requirements for video transmission | |
| Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements | |
| Video surveillance systems for use in security applications - Part 2-2: Video transmission protocols - IP interoperability implementation based on HTTP and REST services | |
| Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability implementation based on Web services | |
| Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces | |
| Video surveillance systems for use in security applications - Part 4: Application guidelines | |
| Video surveillance systems for use in security applications \x96 Part 3: Analog and digital video interfaces | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission \x96 Electrical testing | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) \x96 Electrical Testing | |
| Wireless Power Transfer \x96 AirFuel Resonant Baseline System Specification (BSS) | |
| Wireless Power Transfer \x96 Management \x96 Part 1: Common Components | |
| Wireless power transfer \x96 Management \x96 Part 2: Multiple device control management | |
| Wireless power transfer \x96 Management \x96 Part 3: Multiple source control management | |
| Workplace atmospheres \x96 Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy | |
| Workplace exposure \x96 Measurement of exposure by inhalation to chemical agents \x96 Strategy for testing compliance with occupational exposure limit values |
| << Prev | Next >> |