Accuris Datasheets for Standards and Technical Documents

Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more

Page: 1 300 350 400 450 500 550 580 590 600 610 620 630 637 638 639 640 641 642 643 644 645 646 647 648 649 650 660 670 680 690 700 750 800 850 900 950 1000 1500 1620
Product Name Notes
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
Adhesives for thermoplastic piping systems for fluids under pressure \x96 Specifications
Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups
Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture
Aerosol containers \x96 Aluminium containers \x96 Dimensions of one-piece cans with 25,4 mm aperture
Aerosol containers \x96 Compartmented aerosol containers
Aerosol containers \x96 Glass containers \x96 Dimensions of the neck finish
Aerosol containers \x96 Tinplate containers \x96 Dimensions of two and three-piece cans
Agricultural and forestry machinery and gardening equipment \x96 Pedestrian controlled and hand-held machines \x96 Determination of accessibility of hot surfaces
Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling \x96 Testing and rating at part load conditions and calculation of seasonal performance...
Air filters for general air cleaning \x96 Terminology
Air quality \x96 Stationary source emissions \x96 Determination of total mercury \x96 Automated Measuring Systems
Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Aluminium and aluminium alloys \x96 Structural products for construction works \x96 Technical conditions for inspection and delivery
Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
Anti-seismic devices
Bicycles for young children - Safety requirements and test methods
Biological durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Part 1: Wood held in the storage yard after treatment and...
Bitumen and bituminous binders \x96 Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
Bitumen and bituminous binders \x96 Determination of complex shear modulus and phase angle \x96 Dynamic Shear Rheometer (DSR)
Bitumen and bituminous binders \x96 Determination of the flexural creep stiffness \x96 Bending Beam Rheometer (BBR)
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
Building hardware \x96 Locks and latches \x96 Electromechanically operated locks and striking plates \x96 Requirements and test methods
Building valves - Combined temperature and pressure relief valves - Tests and requirements
Building valves - Expansion valves - Tests and requirements
Building valves - Hydraulic safety groups - Tests and requirements
Building valves - Inline hot water supply tempering valves - Tests and requirements
Building valves - Pressure safety valves - Tests and requirements
Building valves \x96 Expansion groups \x96 Tests and requirements
Characterization of sludges - Laboratory chemical conditioning procedure
Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control
Characterization of waste - Preparation of test portions from the laboratory sample
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
Characterization of waste \x96 Preparation of waste samples for ecotoxicity tests
Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2)
Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)
Chemical disinfectants and antiseptics \x96 Application of European Standards for chemical disinfectants and antiseptics
Chemicals used for treatment of swimming pool water - Ozone
Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , anhydrous
Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , dihydrate
Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate
Chemicals used for treatment of swimming pool water - Sodium hydroxide
Chemicals used for treatment of swimming pool water - Sodium hypochlorite
Chemicals used for treatment of swimming pool water - Sulfuric acid
Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid
Chemicals used for treatment of swimming pool water \x96 Aluminium based coagulants
Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Phosphonic acids and salts
Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts
Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates
Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use
Chemicals used for treatment of water intended for human consumption - Sodium chlorate
Chemicals used for treatment of water intended for human consumption \x96 Sodium chloride for on site electrochlorination using non-membrane technology
Children's high chairs \x96 Part 1: Safety requirements
Children's high chairs \x96 Part 2: Test methods
Children's high chairs \x96 Requirements and test methods
Chimneys \x96 Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications \x96 Part 1: Vertical air/flue terminals for C6-type appliances
Chimneys \x96 Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications \x96 Part 2: Flue and air supply ducts for room sealed...
Conditions for pressure classification of products for water and wastewater pipelines
Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods
Conveyor belts for use in underground installations \x96 Electrical and flammability safety requirements
Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method
Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method
Copper and copper alloys - Determination of beryllium content - FAAS method
Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
Copper and copper alloys - Determination of cobalt content - FAAS method
Copper and copper alloys - Determination of impurities in pure copper - ET AAS method
Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS)
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
Copper and copper alloys \x96 Determination of zinc content \x96 Part 2: Flame atomic absorption spectrometry method (FAAS)
Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels
Cranes - Bridge and gantry cranes
Cranes \x96 Bridge and gantry cranes
Cranes \x96 Requirements for container handling spreaders
Cranes \x96 Slewing jib cranes
Decorative wall coverings \x96 Roll and panel form
Decorative wallcoverings \x96 Roll form
Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods
Design of fans working in potentially explosive atmospheres
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General...
Domestic cookware - Graphical symbols (pictograms)
Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
Ductile iron pipes, fittings and accessories \x96 Requirements and test methods for organic coatings of ductile iron fittings and accessories \x96 Part 1: Epoxy coating (heavy duty)
Ductile iron pipes, fittings and accessories \x96 Requirements and test methods for organic coatings of ductile iron fittings and accessories \x96 Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
Durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Part 2: Wooden commodities exposed in Use Class 4 or 5 (in...
Durability of wood and wood-based products \x96 Determination of treatability of timber species to be impregnated with wood preservatives \x96 Laboratory method
Execution of special geotechnical works - Ground treatment by deep vibration
Explosion isolation systems
Explosion prevention and protection in underground mines \x96 Equipment and protective systems for firedamp drainage
Explosion venting devices
Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
Extended application of results from fire resistance tests - Part 8: Beams
External cathodic protection of well casings
Extruded particleboards - Specifications
Facilities for users of roller sports equipment \x96 Safety requirements and test methods
Fasteners - Tightening performance - Torque/Angle simplified test method
Fertilizers and liming materials - Determination of cadmium content
Fertilizers and liming materials - Determination of water content - Guidelines and recommendations
Fertilizers and liming materials \x96 Sampling and sample preparation \x96 Part 1: Sampling
Fertilizers and liming materials \x96 Sampling and sample preparation \x96 Part 2: Sample preparation
Fertilizers and liming materials \x96 Sampling and sample preparation \x96 Part 3: Sampling of static heaps
Fibre cement profiled sheets - Impact resistance test method
Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
Fibres for concrete \x96 Part 1: Steel fibres \x96 Definitions, specifications and conformity
Fibres for concrete \x96 Part 2: Polymer fibres \x96 Definitions, specifications and conformity
Fixed firefighting system \x96 Gas extinguishing systems \x96 Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant
Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance
Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 11: Physical properties and systems design of gas extinguishing systems for Halocarbon Blend 55 extinguishant (ISO 14520-17:2022, modified)
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant
Fixed firefighting systems \x96 Gas extinguishing systems \x96 Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant
Fixed firefighting systems \x96 Water mist systems \x96 Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 11: Test protocol for cable tunnels for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 12: Test protocol for commercial deep fat cooking fryers for manually activated open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m\xb3 for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m\xb3 for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 16: Test protocol for industrial oil cookers for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 17: Test protocol for residential occupancies for automatic nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 1: Design, installation, inspection and maintenance
Fixed firefighting systems \x96 Water mist systems \x96 Part 3: Test protocol for office, school classrooms and hotel for automatic nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 5: Test protocol for car garages for automatic nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 6: Test protocol for false floors and false ceilings for automatic nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 7: Test protocol for commercial low hazard occupancies for automatic nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 8- Test protocol for machinery in enclosures exceeding 260 m\xb3 for open nozzle systems
Fixed firefighting systems \x96 Water mist systems \x96 Part 9: Test protocol for machinery in enclosures not exceeding 260 m\xb3 for open nozzle systems
Flanges and their joints - Bolting - Part 1: Selection of bolting
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
Flanges and their joints \x96 Bolting \x96 Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
Flanges and their joints \x96 Dimensions of gaskets for PN-designated flanges \x96 Part 1: Non-metallic flat gaskets with or without inserts
Flanges and their joints \x96 Gaskets for PN-designated flanges \x96 Part 2: Spiral wound gaskets for use with steel flanges
Flanges and their joints \x96 Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
Flexible sheets for waterproofing \x96 Bitumen damp proof courses \x96 Definitions and characteristics
Flexible sheets for waterproofing \x96 Plastic and rubber damp proof courses \x96 Definitions and characteristics
Food processing machinery \x96 Dishwashing machines with conveyor \x96 Safety and hygiene requirements
Food processing machinery \x96 Machinery for grinding and processing flour and semolina \x96 Safety and hygiene requirements
Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs
Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
Footwear for firefighters
Fully supported metal sheet and strip for roofing, external cladding and internal lining \x96 Product specification and requirements
Funeral Services \x96 Requirements
Furniture \x96 Domestic and kitchen storage units and kitchen-worktops \x96 Safety requirements and test methods
Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 1 Specification for the storage facility and related storage provision
Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 2: Provision of the service
Garden equipment \x96 Walk-behind combustion engine powered trimmers \x96 Safety
Gas explosion venting protective systems
Gas Infrastructure \x96 Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations \x96 Part 1:...
Gas infrastructure \x96 Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations \x96 Part 2:...
Glass packaging - Cork removal devices - General requirements
Glass packaging - Hand-held crown bottle openers - Dimensions
Health informatics - General purpose information components - Part 1: Overview
Health informatics - General purpose information components - Part 2: Non-clinical
Health informatics - General purpose information components - Part 3: Clinical
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
Heating boilers \x96 Condensing heating boilers for fuel oil
Hygrothermal performance of building components and building elements \x96 Assessment of moisture transfer by numerical simulation
Identification and/or determination of the quantity of waste
Imperfections in thermoplastic welds \x96 Classification
Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
Industrial valves \x96 Mounting kits for part-turn valve actuator attachment
Inflatable play equipment \x96 Part 1: Safety requirements and test methods
Inflatable play equipment \x96 Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation
Inflatable play equipment \x96 Part 3: Additional safety requirements and test methods for snappies
Inflatable play equipment \x96 Part 4: Additional safety requirements and test methods for bungee runs
Inflatable play equipment \x96 Safety requirements and test methods
Influence of cement based products on water intended for human consumption \x96 Test methods \x96 Part 2: Influence of site-applied cement based materials and associated non-cement based products/materials on organoleptic...
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
Influence of cementitious products on water intended for human consumption \x96 Test methods \x96 Part 1: Influence of factory made cementitious products on organoleptic parameters
Inland navigation vessels - Flat bollards
Inland navigation vessels - Studless anchor chain - Cable lifter
Inland navigation vessels \x96 Boarding stairs
Inland navigation vessels and sea-going vessels - Navigation light
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems
Installation and equipment for liquefied natural gas \x96 Design and testing of marine transfer systems \x96 Part 2: Design and testing of transfer hoses
Installation and equipment for liquefied natural gas \x96 Design of onshore installations
Irrigation techniques - Localised irrigation - Hydraulic evaluation
Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations
Joint fillers and sealants - Test methods for preformed joint seals
Laboratory furniture - Storage units for laboratories - Requirements and test methods
Laminate floor coverings \x96 Elements with acrylic based surface layer, electron beam cured \x96 Specifications, requirements and test methods
Language study tour providers - Requirements
Leather - Leather for automotive - Test methods and testing parameters
Lifting platforms \x96 Mast climbing work platforms
Liming materials \x96 Determination of product effect on soil pH \x96 Soil incubation method
Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives \x96 Requirements, test methods, evaluation of conformity, classification and designation
Loft ladders - Requirements, marking and testing
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres
LPG equipment and accessories \x96 Cylinder and drum marking
LPG equipment and accessories \x96 Discharge procedures for LPG rail tankers
LPG equipment and accessories \x96 Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives
Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
Metal bellows expansion joints for pressure applications
Mobile or movable jacks and associated lifting equipment
Mountaineering equipment - Braking devices - Part 2: Manual braking devices, safety requirements and test methods
Mountaineering equipment \x96 Braking devices \x96 Part 1: Braking devices with manually assisted locking, safety requirements and test methods
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
Non-destructive testing \x96 Industrial computed radiography with storage phosphor imaging plates \x96 Part 2: General principles for testing of metallic materials using X-rays and gamma rays
Non-preloaded structural bolting assemblies \x96 Part 1: General requirements
Non-preloaded structural bolting assemblies \x96 Part 2: Fitness for purpose
Open communication in building automation, controls and building management \x96 Control Network Protocol \x96 Part 7: Communication via internet protocols
Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 10: Web Services for Control Networking Protocol Specification
Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 6: Application elements
Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 8: Communication using Broadband over Power Line Networks \x96 with internet protocols
Open Data Communication in Building Automation, Controls and Building Management \x96 Control Network Protocol \x96 Part 9: Wireless Communication in ISM bands
Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
Packaging - Plastic freezer bags - Specifications and test methods
Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
Personal fall protection equipment - Rescue loops
Personal fall protection equipment \x96 Rescue harnesses
Personal fall protection equipment \x96 Rescue lifting devices
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
Petroleum and natural gas industries \x96 Induction bends, fittings and flanges for pipeline transportation systems \x96 Part 4: Factory cold bends (ISO 15590-4:2019, modified)
Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
Plastics - Evaluation of compostability - Test scheme and specifications
Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications
Plastics \x96 Thermoplastic stretch films for wrapping silage bales
Plastics and rubber machines \x96 Bandknife cutting machines for block foams \x96 Safety requirements
Plastics and rubber machines \x96 Film converting machines for bags and sacks \x96 Safety requirements
Plastics piping and ducting systems \x96 Thermoplastics shafts or risers for inspection chambers and manholes \x96 Determination of ring stiffness
Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints
Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints
Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints
Plastics piping systems \x96 Thermoplastics shafts or risers for inspection chambers and manholes \x96 Determination of resistance against surface and traffic loading
Plastics piping systems for non-pressure underground drainage and sewerage \x96 Polypropylene with mineral modifiers (PP-MD) \x96 Part 1: Specifications for pipes, fittings and the system
Playing field equipment - Badminton equipment - Functional and safety requirements, test methods
Playing field equipment - Tennis equipment - Functional and safety requirements, test methods
Power-operated mobile racking and shelving, carousels and storage lifts \x96 Safety requirements
Precast concrete products \x96 Beam-and-block floor systems \x96 Part 1: Beams
Precast concrete products \x96 Beam-and-block floor systems \x96 Part 2: Concrete blocks
Precast concrete products \x96 Beam-and-block floor systems \x96 Part 3: Clay blocks
Precast concrete products \x96 Beam-and-block floor systems \x96 Part 4: Expanded polystyrene blocks
Precast concrete products \x96 Beam-and-block floor systems \x96 Part 5: Lightweight blocks for simple formwork
Precast concrete products \x96 Box culverts
Precast concrete products \x96 Bridge elements
Precast concrete products \x96 Foundation elements
Precast concrete products \x96 Stairs
Precast concrete products \x96 Wall elements
Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing
Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and...
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products...
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 5: Concrete injection \x96 CORRECTIONS 1
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 7: Reinforcement corrosion protection
Products and systems for the protection and repair of concrete structures \x96 Definitions, requirements, quality control and evaluation of conformity \x96 Part 8: Quality control and evaluation of conformity
Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
Protective clothing for fire-fighters \x96 Test methods and requirements for reflective clothing for specialised fire-fighting
Public passenger transport - Basic requirements and recommendations for systems that measure delivered service quality
Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters
Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests
Railway applications - External visible and audible warning devices for high speed trains - Part 1: Head, marker and tail lamps
Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns
Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods
Railway applications - Suspension components - Air spring control elements
Railway applications - Suspension components - Torsion bar, steel
Railway applications - Track - Qualification system for railway trackwork contractors
Railway applications - Track - Special purpose rail - Grooved and associated construction
Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles
Railway applications - Welding of railway vehicles and components - Part 1: General
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
Railway applications \x96 Air conditioning for driving cabs \x96 Part 1: Comfort parameters
Railway applications \x96 Air conditioning for driving cabs \x96 Part 2: Type tests
Railway applications \x96 Air conditioning for urban, suburban and regional rolling stock: Comfort parameters and type tests
Railway applications \x96 Axlebox lubricating greases \x96 Part 1: Method to test the ability to lubricate
Railway applications \x96 Axlebox lubricating greases \x96 Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
Railway applications \x96 Bodyside entrance systems for rolling stock
Railway applications \x96 External visible and audible warning devices \x96 Part 3: Visible warning devices for urban rail
Railway applications \x96 External visible and audible warning devices \x96 Part 4: Audible warning devices for urban rail
Railway applications \x96 External visible and audible warning devices for trains \x96 Part 1: Head, marker and tail lamps
Railway applications \x96 Front windscreens for train cabs
Railway applications \x96 Rescue coupler \x96 Performance requirements, specific interface geometry and test methods
Railway applications \x96 Track \x96 Aluminothermic welding of rails \x96 Part 1: Approval of welding processes
Railway applications \x96 Track \x96 Aluminothermic welding of rails \x96 Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
Railway applications \x96 Welding of railway vehicles and components \x96 Part 2: Quality requirements and certification of welding manufacturer
Railway applications \x96 Welding of railway vehicles and components \x96 Part 2: Requirements for welding manufacturer
Railway applications \x96 Welding of railway vehicles and components \x96 Part 3: Design requirements
Railway applications \x96 Welding of railway vehicles and components \x96 Part 6: Maintenance welding requirements
Railway applications \x96 Windscreens for trains
Refractory products and materials - Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use
Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 1: Rear loaded refuse collection vehicles
Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 2: Side loaded refuse collection vehicles
Refuse collection vehicles \x96 General requirements and safety requirements \x96 Part 5: Lifting devices for refuse collection vehicles
Refuse collection vehicles and associated lifting devices \x96 General requirements and safety requirements \x96 Part 2: Side loaded refuse collection vehicles
Refuse collection vehicles and their associated lifting devices \x96 General requirements and safety requirements \x96 Part 3: Front loaded refuse collection vehicles
Refuse collection vehicles and their associated lifting devices \x96 General requirements and safety requirements \x96 Part 4: Noise test code for refuse collection vehicles
Residential space heating appliances fired by wood pellets \x96 Requirements and test methods
Respiratory protective devices \x96 Filtering half masks to protect against particles \x96 Requirements, testing, marking
Respiratory protective devices \x96 Threads for facepieces \x96 Part 1: Standard thread connection
Respiratory protective devices \x96 Threads for facepieces \x96 Part 2: Centre thread connection
Respiratory protective devices \x96 Threads for facepieces \x96 Part 3: Thread connection M 45 x 3
Rigid underlays for discontinuous roofing - Definitions and characteristics
Rigid underlays for discontinuous roofing \x96 Definitions and characteristics
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
Roof coverings \x96 Continuous rooflights of plastics with or without upstands \x96 Classification, requirements and test methods
Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
Safety of industrial trucks \x96 Self propelled variable reach trucks \x96 Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
Safety of Machinery \x96 Safety requirements for cold flat rolling mills
Safety of Machinery \x96 Safety requirements for hot flat rolling mills
Safety of machinery \x96 Safety requirements for machinery and equipment for continuous casting of steel
Safety of machinery \x96 Safety requirements for strip processing line machinery and equipment
Sanitary tapware \x96 Electronic opening and closing sanitary tapware
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
Self-supporting metal sheet for roofing, external cladding and internal lining \x96 Product specification and requirements
Semantics for groundwater data interchange
Shutters - Acoustic insulation relative to airborne sound - Expression of performance
Single-use containers for venous blood specimen collection
Skateparks \x96 Safety requirements and test methods
Snow grooming equipment - Safety requirements
Snow grooming equipment \x96 Safety requirements
Solid biofuels - Determination of ash content
Solid biofuels - Determination of bulk density
Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
Solid biofuels - Fuel specifications and classes - Part 1: General requirements
Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
Solid biofuels \x96 Determination of calorific value
Solid biofuels \x96 Sample preparation
Solid biofuels \x96 Sampling
Solid hardwood panelling and cladding - Machined profiles elements
Solid softwood panelling and cladding - Machined profiles without tongue and groove
Solid wood panelling and cladding \x96 Characteristics, evaluation of conformity and marking
Solid wood panelling and cladding \x96 Characteristics, requirements and marking
Space engineering \x96 Ground systems and operations \x96 Telemetry and telecommand packet utilization
Space engineering \x96 Multipaction design and test
Space engineering \x96 Verification
Space product assurance - Hazard analysis
Stationary source emissions \x96 Demonstration of equivalence of an alternative method with a reference method
Stationary source emissions \x96 Determination of mass concentration of nitrogen oxides \x96 Standard reference method: chemiluminescence
Stationary source emissions \x96 Determination of mass concentration of sulphur oxides \x96 Standard reference method
Stationary source emissions \x96 Determination of the mass concentration of carbon monoxide \x96 Standard reference method: non-dispersive infrared spectrometry
Stationary source emissions \x96 Determination of the water vapour in ducts \x96 Standard reference method
Stationary source emissions \x96 Determination of volume concentration of oxygen \x96 Standard reference method: Paramagnetism
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
Surface active agents - Determination of N-(3-dimethylaminopr opyl)-alkylamide content in alkylamidopropylbeta ines - Gas chromatographic method
Surface active agents - Determination of the active matter content of alkylamidopropylbeta ines
Surfaces for sport areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas
Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
Surfaces for sports areas - Determination of shock absorption
Surfaces for sports areas - Determination of spike resistance
Surfaces for sports areas - Determination of vertical deformation
Surfaces for sports areas - Determination of water absorption of unbound minerals
Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas
Surfaces for sports areas \x96 Determination of slip resistance
Surfaces for sports areas \x96 Indoor surfaces for multi-sports use \x96 Specification
Surfaces for sports areas \x96 Multi-sports floor systems for indoor use \x96 Test method for determination of rotational friction
Synthetic surfaces for outdoor sports areas - Specification
Synthetic surfaces for outdoor sports areas \x96 Exposure to artificial weathering
Technical drawings - Railway applications - Part 1: General principles
Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents
Technical drawings \x96 Railway applications \x96 Part 2: Parts lists
Technical drawings \x96 Railway applications \x96 Part 4: Data exchange
Test methods for fibres in concrete - Part 1: Reference concretes
Test methods for fibres in concrete - Part 2: Effect on concrete
Textile floor coverings - Classification of textile floor coverings without pile
Textile floor coverings \x96 Determination of sensitivity to spilled water
Textile floor coverings \x96 Determination of the density of the textile fleece backing
Textile slings \x96 Safety \x96 Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
Textile slings \x96 Safety \x96 Part 2: Roundslings made of man-made fibres for general purpose use
Textile slings \x96 Safety \x96 Part 4: Lifting slings for general service made from natural and man-made fibre ropes
Textiles - Burning behaviour of children's nightwear - Specification
Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area
Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics
Textiles - Mattress ticking - Specifications and test methods
Thermal insulation and light weight fill products for civil engineering applications \x96 Factory made products of expanded polystyrene (EPS) \x96 Specification
Thermal insulation and light weight fill products for civil engineering applications \x96 Factory made products of extruded polystyrene foam (XPS) \x96 Specification
Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 2: Specification for the installed products
Thermal insulation products for buildings \x96 In-situ formed loose fill cellulose (LFCI) products \x96 Part 1: Specification for the products before installation
Thermoplastics inspection chamber and manhole bases \x96 Test methods for buckling resistance
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface...
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method
Touch and close fasteners - Determination of resistance to fraying after washing
Translation services - Service requirements
Transport service - City logistics - Guideline for the definition of limited access to city centers
Transport services - Logistics - Glossary of terms
Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
Transportable wall saw and wire saw equipment for job site \x96 Safety
Valves \x96 Materials for bodies, bonnets and covers \x96 Part 4: Copper alloys specified in European Standards
Vehicle lifts
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions
Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams
Waste management \x96 Identification and/or determination of the quantity of waste
Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing
Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment
Water quality - Guidance on the scope and selection of fish sampling methods
Water quality - Guidance standard for the sampling of zooplankton from standing waters
Water quality - Sampling of fish with multi-mesh gillnets
Water supply \x96 Requirements for systems and components for the storage of water
Winter maintenance equipment - Terminology - Terms for winter maintenance
Wood flooring - Sampling procedures for evaluation of conformity
Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick
Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods
Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method
Workplace exposure \x96 Measurement of the dustiness of bulk materials \x96 Part 2: Rotating drum method

<< Prev Next >>