Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
580
590
600
610
620
630
636
637
638
639
640
641
642
643
644
645
646
647
648
650
660
670
680
690
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method | |
| Adhesives - Determination of tensile lap-shear strength of bonded assemblies | |
| Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) | |
| Adhesives for non-pressure thermoplastics piping systems - Specifications | |
| Adhesives for paper and board, packaging and disposable sanitary products \x96 Determination of friction properties of films potentially suitable for bonding | |
| Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method | |
| Agglomerated stone - Terminology and classification | |
| Agglomerated stone - Test methods - Part 10: Determination of chemical resistance | |
| Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient | |
| Agglomerated stone - Test methods - Part 12: Determination of dimensional stability | |
| Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity | |
| Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles | |
| Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption | |
| Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance | |
| Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance | |
| Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance | |
| Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole) | |
| Agglomerated stone - Test methods - Part 9: Determination of impact resistance | |
| Agglomerated stone \x96 Test methods \x96 Part 15: Determination of compressive strength | |
| Agglomerated stone \x96 Test methods \x96 Part 2: Determination of flexural strength (bending) | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements | |
| Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff | |
| Aluminium and aluminium alloys \x96 Chemical analysis \x96 Sampling from metal melts | |
| Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography | |
| Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy | |
| Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry | |
| Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography | |
| Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography | |
| Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography | |
| Ambient air quality \x96 Standard method for measurement of benzene concentrations \x96 Part 1: Pumped sampling followed by thermal desorption and gas chromatography | |
| Baths for domestic purposes | |
| Bidets - Functional requirements and test methods | |
| Bidets \x96 Functional requirements and test methods | |
| Blank detail specification: Relay sockets of assessed quality | |
| Blinds and shutters \x96 Thermal and visual comfort \x96 Performance characteristics and classification | |
| Blinds and shutters \x96 Thermal and visual comfort \x96 Test and calculation methods | |
| Brackets for eaves gutters - Requirements and testing | |
| Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance | |
| Building hardware - Fittings for shutters - Requirements and test methods | |
| Calcium aluminate cement \x96 Composition, specifications and conformity criteria | |
| Cathodic protection of complex structures | |
| Ceramic tiles \x96 Definition, classification, characteristics, assessment and verification of constancy of performance and marking | |
| Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) | |
| Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration | |
| Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) | |
| Characterisation of sludges - Settling properties - Part 2: Determination of thickenability | |
| Characterisation of sludges \x96 Settling properties \x96 Part 3: Determination of zone settling velocity (ZSV) | |
| Characterization of sludges - Determination of total phosphorus | |
| Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility | |
| Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride | |
| Characterization of sludges \x96 Filtration properties \x96 Part 4: Determination of the drainability of flocculated sludges | |
| Characterization of waste - Determination of hydrocarbon content by gravimetry | |
| Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition | |
| Characterization of waste \x96 Calculation of dry matter by determination of dry residue or water content | |
| Characterization of waste \x96 Halogen and sulfur content \x96 Oxygen combustion in closed systems and determination methods | |
| Characterization of waste \x96 Leaching behaviour test \x96 Up-flow percolation test (under specified conditions) | |
| Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1, step 1) | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2,... | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and... | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity in the medical area - Test method and requirements (Phase 2/Step 1) | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase... | |
| Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of virucidal activity in the medical area \x96 Test method and requirements (Phase 2/Step 1) | |
| Chemicals used for treatment of water intended for human consumption \x96 Iron (III) sulfate, solid | |
| Child care articles \x96 Drinking equipment \x96 Safety requirements and test methods | |
| Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests | |
| Child use and care articles \x96 Carry cots and stands \x96 Safety requirements and test methods | |
| Child use and care articles \x96 Child seats for cycles \x96 Safety requirements and test methods | |
| Child use and care articles \x96 Drinking equipment \x96 Part 1: General and mechanical requirements and tests | |
| Child use and care articles \x96 Drinking equipment \x96 Part 2: Chemical requirements and tests | |
| Child-resistant non-reclosable packaging for pharmaceutical products \x96 Requirements and testing | |
| Chimneys \x96 Clay/ceramic flue liners \x96 Part 2: Flue liners operating under wet conditions \x96 Requirements and test methods | |
| Chimneys \x96 General requirements | |
| Chimneys \x96 System chimneys with plastic flue liners \x96 Requirements and test methods | |
| Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses | |
| Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar | |
| Continuous handling equipment and systems \x96 General safety requirements for continuous handling equipment for opencast lignite mining | |
| Copper and copper alloys - Electrolytically tinned strip | |
| Corrugated metal hose assemblies for pressure applications \x96 Part 1: Requirements | |
| Corrugated metal hose assemblies for pressure applications | |
| Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets | |
| Cranes \x96 Equipment for the lifting of persons \x96 Part 2: Elevating control stations | |
| Cranes \x96 Power driven winches and hoists \x96 Part 1: Power driven winches | |
| Cranes \x96 Power driven winches and hoists \x96 Part 2: Power driven hoists | |
| Cranes \x96 Safety \x96 Tower cranes | |
| Cranes \x96 Tower cranes | |
| Crude tar and crude benzole - Characteristics and test methods | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 3: Operational requirements | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 1:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 2:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C - Part 3:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C \x96 Part 4:... | |
| Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 \xb0C and -165 \xb0C \x96 Part 5:... | |
| Determination of the auto ignition temperature of gases and vapours | |
| Determination of the elasticity of fabrics - Part 1: Strip tests | |
| Determination of the elasticity of fabrics \x96 Part 2: Multiaxial tests | |
| Determination of the elasticity of fabrics \x96 Part 3: Narrow fabrics | |
| Determination of the uplift resistance of installed clay or concrete tiles for roofing \x96 Roof system test method | |
| Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F | |
| Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G | |
| Devices to prevent pollution by backflow of potable water - Automatic diverter - Familiy H, type C | |
| Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A | |
| Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A | |
| Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Familiy D, type B | |
| Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C | |
| Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 inclusive - Family L, type A and type B | |
| District heating pipes \x96 Preinsulated bonded pipe systems for directly buried hot water networks \x96 Surveillance systems | |
| Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety | |
| Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 3: Drain and sewer cleaning | |
| Drain and sewer systems outside buildings \x96 Management and control of activities \x96 Part 4: Control of inputs from users | |
| Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity | |
| Ductile iron pipes, fittings and accessories \x96 External polyethylene coating for pipes \x96 Requirements and test methods | |
| Ductile iron pipes, fittings and accessories \x96 Requirements and test methods \x96 Part 1: PE coatings | |
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement | |
| Dust explosion venting protective systems | |
| Equipping of LPG tanks, overground and underground | |
| Execution of special geotechnical works - Deep mixing | |
| Execution of special geotechnical works - Reinforced fill | |
| Execution of special geotechnical works - Soil nailing | |
| Explosion prevention and protection in underground mines \x96 Protective systems \x96 Part 1: 2-bar explosion proof ventilation structure | |
| Explosion prevention and protection in underground mines \x96 Protective systems \x96 Part 2: Passive water trough barriers | |
| Explosion prevention and protection in underground mines \x96 Protective systems \x96 Part 4: Automatic extinguishing systems for road headers | |
| Explosion prevention and protection in underground mining \x96 Protective systems \x96 Part 1: 2-bar explosion proof ventilation structure | |
| Explosion resistant equipment | |
| Explosion suppression systems | |
| Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)... | |
| Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers | |
| Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials | |
| Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification | |
| Fibre-cement pipelines - Guide for laying and on-site work practices | |
| Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders | |
| Fire safety storage cabinets \x96 Part 1: Safety storage cabinets for flammable liquids | |
| Fire test - Large-scale room reference test for surface products | |
| Fire-fighting hoses - Non-percolating layflat hoses for fixed systems | |
| Fire-fighting pumps \x96 Fire-fighting centrifugal pumps without primer \x96 Part 1: Classification, general and safety requirements | |
| Fire-fighting pumps \x96 Fire-fighting centrifugal pumps without primer \x96 Part 2: Verification of general and safety requirements | |
| Fire-fighting pumps \x96 Portable pumps \x96 Safety and performance requirements, tests | |
| Fixed ladders for manholes | |
| Flexible sheets for waterproofing \x96 Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Compatibility by heat conditioning | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Determination of resistance to dynamic water pressure after damage by pre-treatment | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Determination of the behaviour of waterproofing sheets during application of mastic asphalt... | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Determination of the resistance to compaction of an asphalt layer | |
| Food processing machinery \x96 Baguette slicers \x96 Safety and hygiene requirements | |
| Foodstuffs - Determination of 3-monochloropropane- 1,2-diol by GC/MS | |
| Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up | |
| Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection | |
| Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion | |
| Foodstuffs - Determination of trace elements - Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing | |
| Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC | |
| Foodstuffs - Microbiological screening for irradiated food using LAL/GNB procedures | |
| Foodstuffs \x96 Determination of saxitoxin-group toxins in shellfish \x96 HPLC method using pre-column derivatization with peroxide or periodate oxidation | |
| Footwear - Test methods for the assessment of ecological criteria | |
| Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods | |
| Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar) | |
| Gas-fired insets for heating more than one room | |
| Gas-loaded accumulators for fluid power applications | |
| General requirements for components specifically designed for use in trenchless constructions of drains and sewers | |
| Generic specification: Sockets for use with electrical relays of assessed quality | |
| Geosynthetic barriers - Screening test method for determining the resistance to oxidation | |
| Geosynthetic barriers - Test method for determining the resistance to leaching | |
| Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics | |
| Geosynthetics - Screening test method for the determining chemical resistance for landfill applications | |
| Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking | |
| Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Evaluation of conformity/Product standard | |
| Glass packaging \x96 26 H 126 crown finish \x96 Dimensions | |
| Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards \x96 Definitions, requirements and test methods | |
| Health informatics - Guidance for handling personal health data in international applications in the context of the EU data protection directive | |
| Health informatics - International transfer of personal health data covered by the EU data protection directive - High level security policy | |
| Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers | |
| Heat Meters - Part 3: Data exchange and interfaces | |
| Heat meters \x96 Part 1: General requirements | |
| Heat meters \x96 Part 2: Constructional requirements | |
| Heat meters \x96 Part 4: Pattern approval tests | |
| Heat meters \x96 Part 5: Initial verification tests | |
| Heat meters \x96 Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Heating boilers \x96 Heating boilers with forced draught burners \x96 Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 \xb0C | |
| High Performance Helmets for Equestrian Activities | |
| High-strenght structural bolting assemblies for preloading \x96 Part 3: System HR \x96 Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 10: System HRC \x96 Bolt and nut assemblies with calibrated preload | |
| High-strength structural bolting assemblies for preloading \x96 Part 1: General requirements | |
| High-strength structural bolting assemblies for preloading \x96 Part 2: Suitability test for preloading | |
| High-strength structural bolting assemblies for preloading \x96 Part 4: System HV \x96 Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 5: Plain washers | |
| High-strength structural bolting assemblies for preloading \x96 Part 6: Plain chamfered washers | |
| High-strength structural bolting assemblies for preloading \x96 Part 7: System HR \x96 Countersunk head bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 8: System HV \x96 Hexagon fit bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading \x96 Part 9: System HR or HV \x96 Direct tension indicators for bolt and nut assemblies | |
| Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing | |
| Hose fittings with clamp units - Part 2: Hose side parts of hose tail | |
| Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned | |
| Hose fittings with clamp units - Part 5: Threaded connections | |
| Hose fittings with clamp units - Part 6: TW tank truck couplings | |
| Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) | |
| Hose fittings with clamp units \x96 Part 4: Flange connections | |
| Hose fittings with clamp units \x96 Part 7: Cam locking couplings | |
| Hose fittings with screwed ferrules | |
| Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance | |
| Industrial valves - Steel check valves | |
| Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method | |
| Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method | |
| Information technology - Alphanumeric glyph image set for optical character recognition OCR-B - Shapes and dimensions of the printed image | |
| Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions | |
| Inland navigation vessels - Harbours for inland navigation | |
| Inland navigation vessels - Studless anchor chain - Accessories | |
| Inland navigation vessels \x96 Floating landing stages and floating equipment on inland waters \x96 Requirements, tests | |
| Laboratory measurement of airborne and structure-borne sound from service equipment \x96 Part 1: Application rules for waste water installations | |
| Laboratory measurement of noise from waste water installations | |
| LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements | |
| LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises | |
| LPG equipment and accessories - Equipping of LPG tanks overground and underground | |
| LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection | |
| LPG equipment and accessories \x96 Construction and performance of LPG equipment for automotive filling stations \x96 Part 1: Dispensers | |
| LPG equipment and accessories \x96 Procedure for checking LPG cylinders before, during and after filling | |
| LPG equipment and accessories \x96 Transportable refillable fully wrapped composite cylinders for LPG \x96 Design and construction | |
| LPG equipment and accessories \x96 Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders \x96 Periodic inspection | |
| LPG equipment and accessories \x96 Transportable refillable welded steel cylinders for LPG \x96 Design and construction | |
| Management and control of operational activities in drain and sewer systems outside buildings \x96 Part 1: Cleaning | |
| Management and control of operational activities in drain and sewer systems outside buildings \x96 Part 2: Rehabilitation | |
| Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications | |
| Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test | |
| Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact | |
| Mechanical fasteners for gypsum plasterboard systems \x96 Definitions, requirements and test methods | |
| Medical face masks \x96 Requirements and test methods | |
| Metal beads and feature profiles for use with gypsum plasterboards \x96 Definitions, requirements and test methods | |
| Metallic coatings on nonmetallic basis materials \x96 Measurement of coating thickness \x96 Microresistivity method | |
| Natural stone \x96 Rough blocks \x96 Requirements | |
| Natural stone \x96 Rough slabs \x96 Requirements | |
| Natural stone products \x96 Slabs for cladding \x96 Requirements | |
| Natural stone test methods - Determination of linear thermal expansion coefficient | |
| Natural stone test methods - Determination of sound speed propagation | |
| Natural stone test methods - Determination of static elastic modulus | |
| Non controllable backflow preventer with different pressure zones - Familiy C, type A | |
| Non-destructive examination of welds - Radiographic examination of welded joints | |
| Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources | |
| Non-destructive testing of welds - Radiographic testing of welded joints | |
| Packaging - Collapsible aluminium tubes - Tactile warnings of danger | |
| Packaging - Flexible packaging material - Determination of puncture resistance - Test methods | |
| Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method | |
| Performance of portable leak detectors and of room monitors for halogenated refrigerants | |
| Personal eye-equipment \x96 Faceshields and visors for use with firefighters', and high performance industrial safety helmets used by firefighters, ambulance and emergency services | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 1: Test methods | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 2: Requirements for wearable knee protectors (type 1) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 3: Requirements for the individual combination of knee pads and garments (type 2) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 5: Requirements for knee mats (type 3) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position \x96 Part 6: Requirements for kneeling systems (type 4) | |
| Personal protective equipment \x96 Knee protectors for work in the kneeling position | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials | |
| Pillar fire hydrants | |
| Plastics pipes and fittings \x96 Utilisation of thermoplastics recyclates \x96 Part 1: Vocabulary | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure | |
| Plastics piping systems for drainage and sewerage with or without pressure \x96 Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) \x96 Specifications for pipes, fittings and joints | |
| Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints | |
| Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Acrylonitrile-butadi ene-styrene (ABS) \x96 Part 1: Requirements for pipes, fittings and the system... | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polypropylene (PP) \x96 Part 1: Specifications for pipes, fittings and the system | |
| Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 1: Specifications for pipes and the... | |
| Portable, hand-held, internal combustion cutting-off machines - Safety | |
| Postal services - Trays for international letter mail - Test methods and performance requirements | |
| Postal services \x96 Digital postage marks \x96 Applications, security and design | |
| Postal services \x96 Quality of service \x96 Measurement of the transit time of end-to-end services for bulk mail | |
| Postal services \x96 Quality of service \x96 Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail | |
| Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods | |
| Precast concrete products - General rules for factory production control of metallic fibered concrete | |
| Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) | |
| Prevention of crime \x96 Urban planning and building design \x96 Part 1: Definition of specific terms | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability | |
| Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes after air drying and water storage cycles | |
| Products used for treatment of water intended for human consumption - Bone charcoal | |
| Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina | |
| Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone | |
| Protective clothing against liquid chemicals \x96 performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types... | |
| Protective clothing against rain \x96 Test method for ready made garments \x96 Impact from above with high energy droplets | |
| Pulp, paper and board - Determination of the Diisopropylnaphthale ne (DIPN) content by solvent extraction | |
| Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements | |
| Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests | |
| Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction | |
| Railway applications \x96 Brake discs for railway rolling stock \x96 Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements | |
| Railway applications \x96 Brake discs for railway rolling stock \x96 Part 3: Brake discs, performance of the disc and the friction couple, classification | |
| Railway applications \x96 Braking \x96 Generic vocabulary | |
| Railway applications \x96 Methods for calculation of stopping and slowing distances and immobilization braking \x96 Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles | |
| Railway applications \x96 Methods for calculation of stopping and slowing distances and immobilization braking \x96 Part 2: Step by step calculations for train sets or single vehicles | |
| Railway applications \x96 Straight and angled end cocks for brake pipe and main reservoir pipe | |
| Railway applications \x96 Testing and Simulation for the acceptance of running characteristics of railway vehicles \x96 Running Behaviour and stationary tests | |
| Railway applications \x96 Track \x96 Flash butt welding of rails \x96 Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant | |
| Railway applications \x96 Track \x96 Flash butt welding of rails \x96 Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a... | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements | |
| Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements | |
| Resilient floor coverings - Specifications for smooth rubber floor coverings with or without foam backing and with decorative layer | |
| Resilient floor coverings \x96 Floor coverings based upon synthetic thermoplastic polymers \x96 Specification | |
| Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking | |
| Respiratory protective devices \x96 Compressed air line breathing apparatus with demand valve \x96 Part 1: Apparatus with a full face mask \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Continuous flow compressed air line breathing apparatus \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 1: Thread connection for insert connector | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 1: Thread connections for insert connector | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 2: Outlet connections | |
| Respiratory protective devices \x96 Gas cylinder valves \x96 Part 3: Outlet connections for diving gases Nitrox and oxygen | |
| Respiratory protective devices \x96 Gas filter(s) and combined filter(s) \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Particle filters \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only | |
| Rigid plastics containers - Methods to test the effectiveness of closures | |
| Road marking materials \x96 Retroreflecting road studs \x96 Part 1: Initial performance requirements | |
| Road marking materials \x96 Retroreflecting road studs \x96 Part 2: Road test performance specifications | |
| Road marking materials \x96 Road marking performance for road users and test methods | |
| Road marking materials \x96 Road marking performance for road users | |
| Road traffic noise reducing devices - Specifications | |
| Road traffic noise reducing devices \x96 Procedures for assessing long term performance \x96 Part 1: Acoustical characteristics | |
| Road traffic noise reducing devices \x96 Procedures for assessing long term performance \x96 Part 2: Non-acoustical characteristics | |
| Roller sports equipment \x96 Kick scooters \x96 Safety requirements and test methods | |
| Rotary positive displacement pumps - Performance tests for acceptance | |
| Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 1: Variable-reach trucks | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 2: Slewing variable-reach trucks | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 4: Additional requirements for variable-reach trucks handling freely suspended loads | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 5: Attachment interface | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened | |
| Safety and control devices for burners and appliances burning gaseous or liquid fuels \x96 Control functions in electronic systems \x96 Methods for classification and assessment | |
| Safety devices for gas pressure regulating stations and installations \x96 Gas safety shut-off devices for inlet pressures up to 100 bar | |
| Safety of children's clothing \x96 Cords and drawstrings on children's clothing \x96 Specifications | |
| Safety of industrial trucks \x96 Self-propelled variable reach trucks | |
| Safety of machinery \x96 Safety requirements for extrusion presses for steel and non-ferrous metals | |
| Safety of machinery \x96 Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals | |
| Safety of machinery \x96 Safety requirements for machinery and equipment for production of steel by electric arc furnaces | |
| Safety of machinery \x96 Secondary steelmaking \x96 Machinery and equipment for treatment of liquid steel | |
| Sanitary appliances - Wash basins - Functional requirements and test methods | |
| Sanitary appliances \x96 Wash basins \x96 Functional requirements and test methods | |
| Sectional specification: Relay sockets of assessed quality | |
| Secure storage units \x96 Requirements, classification and methods of test for resistance to burglary \x96 Secure cabinets | |
| Secure storage units \x96 Requirements, classification and methods of test for resistance to burglary \x96 Secure safe cabinets | |
| Self adhesive tapes \x96 Measurement of breaking strength and elongation at break | |
| Self-supporting double skin metal faced insulating panels - Factory made products - Specifications | |
| Shower enclosures - Functional requirements and test methods | |
| Shower enclosures \x96 Functional requirements and test methods | |
| Shower trays for domestic purposes | |
| Smoke alarm devices | |
| Solid softwood panelling and cladding - Machined profiles with tongue and groove | |
| Space engineering - Mechanical - Part 1: Thermal control | |
| Space engineering \x96 Mechanical \x96 Part 6: Pyrotechnics | |
| Space engineering \x96 Mechnical \x96 Part 7: Mechnical parts | |
| Space engineering standards \x96 Functional analysis | |
| Space product assurance - Verification and approval of automatic machine wave soldering | |
| Space project management - Tailoring of space standards | |
| Specification for dedicated liquefied petroleum gas appliances \x96 Parasol patio heaters \x96 Flueless radiant heaters for outdoor or amply ventilated area use | |
| Sprayed concrete - Part 1: Definitions, specifications and conformity | |
| Sprayed concrete - Part 2: Execution | |
| Stationary source emissions \x96 Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V | |
| Stretched ceilings \x96 Requirements and test methods | |
| Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test | |
| Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method | |
| Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method | |
| Surface active agents - Determination of foamability and degree of foamability - Circulation test method | |
| Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method | |
| Surface active agents - Determination of physical stability in alkaline and acid solutions | |
| Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method | |
| Surface active agents - Determination of surface tension | |
| Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method | |
| Surface active agents - Sodium dodecyl sulfate - Analytical method | |
| Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | |
| Symbols for timber and wood-based products | |
| Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods | |
| Table tennis - Part 2: Posts for net assemblies - Requirements and test methods | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves | |
| Tanks for transport of dangerous goods \x96 Service equipment \x96 Breather device | |
| Tanks for transport of dangerous goods \x96 Service equipment for tanks \x96 Emergency pressure relief valve | |
| Tanks for transport of dangerous goods \x96 Terminology | |
| Temperature control devices and temperature limiters for heat generating systems | |
| Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete | |
| Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) | |
| Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete | |
| Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens | |
| Testing sprayed concrete - Part 4: Bond strength of cores by direct tension | |
| Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens | |
| Testing sprayed concrete - Part 6: Thickness of concrete on a substrate | |
| Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete | |
| Testing sprayed concrete - Sampling fresh and hardened concrete | |
| Textile floor coverings - Assessment of changes in appearance | |
| Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings | |
| Textile floor coverings \x96 Classification of carpet underlays | |
| Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction | |
| Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns | |
| Textiles - Terry towels and terry towel fabrics - Specification and methods of test | |
| Textiles \x96 Upholstery fabrics \x96 Specification and methods of test | |
| Textiles and textile products - Burning behaviour of bedding items - Classification scheme | |
| Thermal energy meters \x96 Part 1: General requirements | |
| Thermal energy meters \x96 Part 2: Constructional requirements | |
| Thermal energy meters \x96 Part 4: Pattern approval tests | |
| Thermal energy meters \x96 Part 5: Initial verification tests | |
| Thermal energy meters \x96 Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of maximum service temperature for preformed pipe insulation | |
| Timber structures - Connectors - Requirements | |
| Timber structures \x96 Calculation and verification of characteristic values | |
| Timber structures \x96 Connectors \x96 Requirements | |
| Timber structures \x96 Dowel-type fasteners \x96 Requirements | |
| Timber structures \x96 Structural laminated veneer lumber \x96 Requirements | |
| Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) | |
| Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods... | |
| Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods | |
| Transportable refillable composite cylinders for LPG - Design and construction | |
| Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams | |
| Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing | |
| Water quality - Detection of human enteroviruses by monolayer plaque assay | |
| Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters | |
| Water quality \x96 Guidance standard for assessing the hydromorphological features of rivers | |
| Welding and allied processes \x96 Environmental check list | |
| Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys | |
| Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys | |
| Welding consumables - Welding consumables for hard-facing | |
| Windows - Determination of the resistance to racking | |
| Windows - Determination of the resistance to static torsion | |
| Windows and doors \x96 Product standard, performance characteristics \x96 Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | |
| Windows and doors \x96 Product standard, performance characteristics \x96 Part 1: Windows and external pedestrian doorsets | |
| Windows and doors \x96 Product standard, performance characteristics \x96 Part 2: Internal pedestrian doorsets | |
| Wood flooring \x96 Characteristics, evaluation of conformity and marking | |
| Wood-based panels \x96 Wood veneer floor covering | |
| Workplace atmospheres - Determination of diesel particulate matter - General requirements | |
| Workplace atmospheres \x96 Volumetric bioaerosol sampling devices \x96 Requirements and test methods | |
| Writing boards for educational institutions \x96 Ergonomic, technical and safety requirements and their test methods |
| << Prev | Next >> |