Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
355
356
357
358
359
360
361
362
363
364
365
366
367
370
380
390
400
410
420
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| 3D Display devices Part 1-2: Generic \x97 Terminology and letter symbols | |
| 3D display devices Part 22-1: Measuring methods for autostereoscopic displays - Optical | |
| AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) \x97 Performance requirements for low frequency squarewave operation | |
| Accessibility terms and definitions | |
| Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 1: Determination of Tensile Properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties | |
| Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 3: Determination of Flexural Strength | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) | |
| Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners | |
| Agricultural and Forestry Machinery - Pedestrian Controlled Tractors with Mounted Rotary Cultivators, Motor Hoes, Motor Hoes with Drive Wheel(s) - Safety | |
| Agricultural Machinery - Combine Harvesters and Forage Harvesters - Safety | |
| Agricultural Machinery - Manure Spreaders - Safety | |
| Agricultural Machinery - Pick-Up Balers - Safety | |
| Agricultural Machinery - Silage Cutters - Safety | |
| Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety | |
| Agricultural Machinery - Slurry Tankers - Safety | |
| Agricultural Machinery - Soil Working Machines with Powered Tools - Safety | |
| Agricultural Machinery - Vine Shoot Tipping Machines - Safety | |
| Aluminium and Aluminium Alloys - Finstock - Part 1: Technical Conditions for Inspection and Delivery | |
| Aluminium and Aluminium Alloys - Finstock - Part 2: Mechanical Properties | |
| Aluminium and Aluminium Alloys - Finstock - Part 3: Tolerances on Dimensions and Form | |
| Analysis techniques for dependability - Event tree analysis (ETA) | |
| Analysis techniques for dependability - Petri net techniques | |
| Articulated systems and flexible systems for cable guiding | |
| Audio Archive System Part 1-1: DVD disk and data migration for long term audio data storage | |
| Audio reproduction method for normalized loudness level (TA 20) | |
| Audio reproduction method for normalized loudness level | |
| Audio, video and information technology equipment \x97 Routine electrical safety testing in production | |
| Audio, video and multimedia systems - General channel assignment of multichannel audio | |
| Audio, video and multimedia systems and equipment \x97 Digital television accessibility \x97 Functional specifications | |
| Audio, video multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books | |
| Automatic Forced Draught Burners for Gaseous Fuels | |
| Battery charge controllers for photovoltaic systems - Performance and functioning | |
| Battery charging interface for small handheld multimedia devices Part 1: 2 mm barrel interface | |
| Battery charging interface for small handheld multimedia devices Part 2: 2 mm barrel type interface conformance testing | |
| Building intercom systems Part 1-1: System requirements - General | |
| Building intercom systems Part 1-1: System requirements \x97 General | |
| Building intercom systems Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) | |
| Calibration of tuneable laser sources | |
| Catering Containers - Part 1: Specification for Dimensions of Containers | |
| Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | |
| Cement-Bonded Particle Boards - Specification - Part 1: General Requirements | |
| Cement-Bonded Particleboards - Definition and Classification | |
| Cement-Bonded Particleboards - Specifications - Part 2: Requirements for OPC Bonded Particleboards for Use in Dry, Humid and Exterior Conditions | |
| Cleaning robots for household use \x97 Dry cleaning: Methods of measuring performance | |
| Common Requirements for Concrete Pressure Pipes Including Joints and Fittings | |
| Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V \x97 Definitions, test methods and acceptance... | |
| Computation of waveform parameter uncertainties | |
| Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability | |
| Connectors for DC-application in photovoltaic systems \x97 Safety requirements and tests | |
| Connectors for electrical and electronic equipment Part 5: Detail specification for 2-way M8 and M12 circular connectors, shielded or unshielded, free and fixed. Mechanical mating information, pin assignment and additional... | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 2-1: Media formats | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 2-2: HTTP adaptive streaming | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 3: Content metadata | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes Part 1: General principles and requirements | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes Part 2: System aspects | |
| Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods | |
| Demonstration of dependability requirements - The dependability case | |
| Desktop and notebook computers - Measurement of energy consumption | |
| Determination of the Compressive Strength of Autoclaved Aerated Concrete | |
| Determination of the Dry Density of Autoclaved Aerated Concrete | |
| Determination of the Drying Shrinkage of Autoclaved Aerated Concrete | |
| Device embedded substrate Part 1-1: Generic specification \x97 Test methods | |
| Devices and integration in enterprise systems; Field Device Integration Part 3: FDI Server | |
| Dielectric and resistive properties of solid insulating materials Part 1: General | |
| Dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC methods) \x97 Volume resistance and volume resistivity \x97 General method | |
| Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC Methods) \x97 Surface resistance and surface resistivity | |
| Dielectric and resistive properties of solid insulating materials Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance | |
| Digital audiobook file format and player requirements | |
| Digital load side transmission lighting control Part 1: Basic requirements | |
| Digital terrestrial television receivers for the DTMB system | |
| Digital video interface - Gigabit video interface for multimedia systems | |
| Document kinds for Electrical and Instrumentation Projects in the Process Industry | |
| Double-capped LED lamps designed to retrofit linear fluorescent lamps \x97 Safety specifications | |
| Elastomeric Seals - Materials Requirements for Pipe Joint Seals Used in Water and Drainage Applications - Part 2: Thermoplastic Elastomers | |
| Elastomeric Seals - Materials Requirements for Pipe Joint Seals Used in Water and Drainage Applications - Part 3: Cellular Materials of Vulcanized Rubber | |
| Elastomeric Seals - Materials Requirements for Pipe Joint Seals Used in Water and Drainage Applications - Part 4: Cast Polyurethane Sealing Elements | |
| Elastomeric Seals - Materials Requirements for Pipe Joint Seals Used in Water and Drainage Applications Part 1: Vulcanized Rubber | |
| Elastomeric Seals - Materials Requirements for Seals Used in Pipes and Fittings Carrying Gas and Hydrocarbon Fluids | |
| Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics | |
| Electric motor-operated hand-held tools, transportable tools and lawn and arden machinery \x96 Safety Part 3-12: Particular requirements for transportable threading machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-10: Particular requirements for hand-held mixers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-1: Particular requirements for hand-held drills and impact drills | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-21: Particular requirements for hand-held drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-14: Particular requirements for transportable drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-1: Particular requirements for transportable table saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-6: Particular requirements for transportable diamond drills with liquid system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-2: Particular requirements for hedge trimmers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety Part 2-17: Particular requirements for hand-held routers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety Part 3-9: Particular requirements for transportable mitre saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 1: General requirements | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-5: Particular requirements for hand-held circular saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-8: Particular requirements for hand-held shears and nibblers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-13: Particular requirements for transportable drills | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-1: Particular requirements for transportable table saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-4: Particular requirements for transportable bench grinders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-6: Particular requirements for transportable diamond drills with liquid system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-9: Particular requirements for transportable mitre saws | |
| Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery \x97 Safety Part 4-1: Particular requirements for chain saws | |
| Electric welding equipment \x97 Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Part 2: Arc welding equipment | |
| Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements | |
| Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter | |
| Electrolyte and water for vented lead acid accumulators Part 1: Requirements for electrolyte | |
| Electrolyte and water for vented lead acid accumulators Part 2: Requirements for water | |
| Electronic railway equipment - On-board multimedia and telematic subsystems for railways Part 1: General architecture | |
| Electronic railway equipment \x97 On board driving data recording system Part 1: System specification | |
| Electronic railway equipment \x97 On board driving data recording system Part 2: Conformity testing | |
| Electronic railway equipment \x97 On-board multimedia and telematic subsystems for railways Part 1: General architecture | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 2: Role class libraries | |
| Engineering data exchange format for use in industrial automation systems engineering \x97 Automation markup language Part 3: Geometry and kinematics | |
| Engineering data exchange format for use in industrial automation systems engineering Part 1: Architecture and General Requirements | |
| Environmental standardization for electrical and electronic products and systems \x97 Glossary of terms | |
| Event video data recorder for road vehcle accidents Part 1: Basic requirements | |
| Expression of performance of fluorometric oxygen analyzers in liquid media | |
| Fibre optic active components and devices - Reliability standards Part 3: Laser modules used for telecommunication | |
| Fibre optic interconnecting devices and passive components \x97 Fibre optic connector product specifications Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre | |
| Fibre optics - Launch condition requirements for measuring multimode attenuation | |
| Fibre Ropes for General Service - General Specification | |
| Fibre Ropes for General Service - Manila and Sisal | |
| Fibre Ropes for General Service - Polyamide | |
| Fibre Ropes for General Service - Polyester | |
| Fibre Ropes for General Service - Polyethylene | |
| Fibre Ropes for General Service - Polypropylene | |
| Field Device Integration (FDI) Part 101-1: Profiles \x97 Foundation Fieldbus H1 | |
| Field Device Integration (FDI) Part 101-2: Profiles \x97 Foundation Fieldbus HSE | |
| Field Device Integration (FDI) Part 103-1: Profiles \x97 PROFIBUS | |
| Field Device Integration (FDI) Part 103-4: Profiles \x97 PROFINET | |
| Field Device Integration (FDI) Part 109-1: Profiles \x97 HART(r) and WirelessHART(r) | |
| Field device integration (FDI) Part 1: Overview | |
| Field Device Integration (FDI) Part 2: FDI Client | |
| Field Device Integration (FDI) Part 4: FDI Packages | |
| Field Device Integration (FDI) Part 5: FDI Information Model | |
| Field Device Integration (FDI) Part 6: FDI Technology Mapping | |
| Field Device Integration (FDI) Part 7: FDI Communication Devices | |
| File allocation system with minimized reallocation for multimedia home server (TA 8) | |
| Fire-fighting hoses Semi-rigid hoses for fixed systems | |
| Fixed Firefighting Systems - Hose Systems - Part 1: Hose Reels with Semi-Rigid Hose | |
| Fixed FireFighting Systems - Hose Systems - Part 3: Maintenance of Hose Reels with Semi-Rigid Hose and Hose Systems with Lay-Flat Hose | |
| Fixed Firefighting Systems - Hose Systems Part 2: Hose Systems with Lay-Flat Hose | |
| Fluids for electrotechnical applications \x97 Unused natural esters for transformers and similar electrical equipment | |
| Fluorescent induction lamps - Performance specification | |
| Fluorescent induction lamps - Safety specifications | |
| Fluorescent induction lamps \x96 Safety specifications | |
| Gas-Fired Central Heating Boilers - Specific Requirements for Condensing Boilers with a Nominal Heat Input Not Exceeding 70 kW | |
| Gas-Fired Central Heating Boilers - Type B Boilers of Nominal Heat Input Exceeding 70 kW but Not Exceeding 300 kW | |
| General lighting \x97 Light emitting diode (LED) products and related equipment \x97 Terms and definitions | |
| General requirements for arc fault detection devices | |
| Generic specification of information on products by properties Part 1: Principles and methods | |
| Glass in Building - Determination of Thermal Transmittance (U Value) - Calculation Method | |
| Glass in Building - Determination of Thermal Transmittance (U Value) - Guarded Hot Plate Method | |
| Glass in Building - Determination of Thermal Transmittance (U Value) - Heat Flow Meter Method | |
| Guidance on human aspects of dependability | |
| Guidance on software aspects of dependability | |
| Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) | |
| GX16t-5 capped tubular led lamp \x97 Safety specifications | |
| High Definiton (HD) recording link guidelines | |
| High Frequency Inductive Components - Fixed surface mount inductors for use in electronic and telecommunication equipment | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 1: General requirements | |
| Household refrigerating appliances - Characteristics and test methods Part 1: General requirements | |
| Household refrigerating appliances \x96 Characteristics and test methods Part 2: Performance requirements | |
| Household refrigerating appliances \x97 Characteristics and test methods Part 1: General requirements | |
| Household refrigerating appliances \x97 Characteristics and test methods Part 3: Energy consumption and volume | |
| Household refrigerating appliances \x97 Characteristics and test methods | |
| Identification and communication interoperability method for external power supplies used with portable computing devices | |
| Identification systems enabling unambiguous information interchange - Requirements Part 1: Principles and methods | |
| In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | |
| Industrial communication networks - Wireless communication network and communication profiles - WirelessHART | |
| Industrial communication networks - Wireless communication networks Part 1: Wireless communication requirements and spectrum considerations | |
| Industrial communication networks - Wireless communication networks Part 2: Coexistence management | |
| Industrial communication networks \x97 Wireless communication networks Part 2: Coexistence management | |
| Industrial electroheating equipment \x97 Test methods for infrared emitters | |
| Industrial electroheating installations \x97 Test methods for infrared electroheating installations | |
| Industrial networks - Wireless communication network and communication profiles - WIA-FA | |
| Industrial networks \x97 Wireless communication network and communication profiles \x97 ISA 100.11a | |
| Industrial networks \x97 Wireless communication network and communication profiles \x97 WIA-PA | |
| Inland Navigation Vessels - Railings for Decks - Requirements, Types | |
| Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil | |
| Interface for loudspeakers with digital input signals based on IEC 60958 | |
| Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Junction boxes for photovoltaic modules \x97 Safety requirements and tests | |
| Kitchen Sinks - Connecting Dimensions | |
| LCD backlight unit - Part 1-2: Terminology and letter symbols | |
| LCD backlight unit Part 1-1: Generic specification | |
| LCD backlight unit Part 2: Electro-optical measurement methods of LED backlight unit | |
| LED modules for general lighting - Performance requirements | |
| LED-binning Part 1: General requirements and white colour grid intended for automotive applications | |
| LED-binning Part 1: General requirements and white colour grid | |
| LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications | |
| Lightning density based on lightning location systems (LLS) \x97 General principles | |
| Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) | |
| Lightning Protection System Components (LPSC) Part 1: Requirements for connection components | |
| Lightning Protection System Components (LPSC) Part 2: Requirements for conductors and earth electrodes | |
| Lightning Protection System Components (LPSC) Part 3: Requirements for isolating spark gaps | |
| Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners | |
| Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lightning Protection System Components (LPSC) Part 7: Requirements for earthing enhancing compounds | |
| List of European Standard Qualities of Waste Paper | |
| Lithium ion capacitors for use in electric and electronic equipment \x97 Test methods for electrical characteristics | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange Part 1: Catalogue data | |
| Low-voltage switchgear and controlgear \x97 Product data and properties for information exchange | |
| Low-voltage switchgear and controlgear enclosed equipment Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work | |
| Luminaire performance - Part 1: General requirements | |
| Luminaire performance Part 2-1: Particular requirements for LED luminaires | |
| Machine tools - Mechanical presses - Safety | |
| Machine Tools - Safety - Hydraulic Presses | |
| Machine tools. Safety. Hydraulic presses | |
| Management of alarms systems for the process industries | |
| Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements | |
| Maritime navigation and radiocommunication equipment and systems \x97 Integrated communication system (ICS) \x97 Operational and performance requirements, methods of testing and required test results | |
| Materials and Articles in Contact with Foodstuffs - Catering Containers Part 2: Dimensions of Accessories and Supports | |
| Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) systems | |
| Measurement procedures for materials used in photovoltaic modules Part 1-2: Encapsulants \x97 Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials | |
| Measurement procedures for materials used in photovoltaic modules Part 1-4: Encapsulants \x97 Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength | |
| Measurement procedures for materials used in photovoltaic modules Part 1-5: Encapsulants \x97 Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions | |
| Measurement procedures for materials used in photovoltaic modules Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate | |
| Measurement procedures for materials used in photovoltaic modules Part 1-6: Encapsulants Test methods for determining the degree of cure in Ethylene-Vinyl Acetate | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 1: Basic methods for the measurement | |
| Mechanical Presses - Safety | |
| Mechanical structures for electrical and electronic equipment \x97 Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 5: Cooling performance evaluation for indoor cabinets | |
| Mechanical structures for electronic equipment \x97 Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 4: Cooling performance tests for water supplied heat exchangers in... | |
| Medical electrical equipment - Medical image display systems Part 1: Evaluation methods | |
| Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze | |
| Method for measuring photovoltaic (PV) glass Part 2: Measurement of transmittance and reflectance | |
| Methodology for communication network dependability assessment and assurance | |
| Methods for product accelerated testing | |
| Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission network | |
| Methods of measuring performances of electric hair clippers or trimmers for household use | |
| MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged Edition, 2015) | |
| Monitoring and measuring systems used for data collection, gathering and analysis Part 1: Device requirements | |
| Multimedia gateway in home networks - Guidelines | |
| Multimedia home network configuration \x97 Basic Reference model Part 1: System model | |
| Multimedia home server systems - Rights information interoperability for IPTV | |
| Multimedia quality - Method of assessment of synchronization of audio and video | |
| Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture map for auditory presentation of printed texts | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory presentation of printed texts | |
| Nanomanufacturing \x97 Key control characteristics Part 3-1: Luminescent nanomaterials \x97 Quantum efficiency | |
| Nuclear instrumentation \x97 Constructional requirements and classification of radiometric gauges | |
| Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions | |
| Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices | |
| Nuclear power plants \x97 Instrumentation and control systems important to safety \x97 Design and qualification of isolation devices | |
| Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters Part 1: Pressure transmitters | |
| OPC unified architecture Part 100: Device Interface | |
| OPC unified architecture Part 10: Programs | |
| OPC unified architecture Part 11: Historical Access | |
| OPC unified architecture Part 13: Aggregates | |
| OPC unified architecture Part 3: Address Space Model | |
| OPC unified architecture Part 4: Services | |
| OPC unified architecture Part 5: Information model | |
| OPC unified architecture Part 6: Mappings | |
| OPC unified architecture Part 8: Data Access | |
| OPC unified architecture Part 9: Alarms and conditions | |
| OPC unified architecture specification Part 7: Profiles | |
| Organic light emitting diode (OLED) panels for general lighting - Safety requirements | |
| Organic light emitting diode (OLED) panels for general lighting \x97 Performance requirements | |
| Overhead lines \x97 Methods for testing self-damping characteristics of conductors | |
| Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances - Expression of Direction of Manufacture | |
| Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Cold Water Extract | |
| Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Hot Water Extract | |
| Paper and Board Intended to Come into Contact with Foodstuffs Determination of Colour Fastness of Dyed Paper and Board | |
| Paper and Board Intended to Come into Contact with Foodstuffs Determination of the Fastness of Fluorescent Whitened Paper and Board | |
| Particular safety requirements for equipment to be connected to information and communication technology networks | |
| Performance evaluation methods of mobile household robots | |
| Photovoltaic (PV) modules \x97 Ammonia corrosion testing | |
| Photovoltaic (PV) modules \x97 Transportation testing Part 1: Transportation and shipping of module package units | |
| Photovoltaic concentrators (CPV) - Performance testing Part 3: Performance measurements and power rating | |
| Photovoltaic concentrators (CPV) \x97 Performance testing Part 1: Standard conditions | |
| Photovoltaic concentrators (CPV) \x97 Performance testing Part 2: Energy measurement | |
| Photovoltaic modules - Bypass diode - Thermal runaway test | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| Photovoltaic systems \x97 Design qualification of solar trackers | |
| Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Tensile Properties | |
| Plastics Piping Systems - Glass-Reinforced Plastics Components - Determination of the Amounts of Constituents Using the Gravimetric Method | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Methods for Regression Analyses and Their Use | |
| Plywood - Classification by Surface Appearance - Part 5: Methods for Measuring and Expressing Characteristics and Defects | |
| Plywood - Classification by Surface Appearance Part 1: General | |
| Plywood - Classification by Surface Appearance Part 2: Hardwood | |
| Plywood - Classification by Surface Appearance Part 3: Softwood | |
| Plywood - Specifications Part 1: Requirements for Plywood for Use in Dry Conditions | |
| Plywood - Specifications Part 2: Requirements for Plywood for Use in Humid Conditions | |
| Plywood - Specifications Part 3: Requirements for Plywood for Use in Exterior Conditions | |
| Plywood - Specifications | |
| Plywood Specifications | |
| Power losses in voltage sourced converter (VSC) valves for high voltage direct current (HVDC) systems Part 2: Modular multilevel converters | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General requirements | |
| Power quality measurement in power supply systems Part 1: Power quality instruments (PQI) | |
| Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements | |
| Power sources for a wireless communication device Part 1: General requirements of power modules | |
| Power sources for a wireless communication device Part 2: Profile for power modules with batteries | |
| Power sources for a wireless communication device Part 3: Generic energy harvesting adapter module | |
| Prestressed Concrete Pressure Pipes, Cylinder and Non- Cylinder, Including Joints, Fittings and Specific Requirement for Prestressing Steel for Pipes | |
| Process management for avionics - Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Programmable components in electronic lamp controlgear \x97 General and safety requirements | |
| Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials | |
| Protective Gloves for Firefighters | |
| Quality evaluation method for the sound field of directional loudspeaker array system | |
| Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material | |
| Radiation protection instrumentation \x97 Highly sensitive hand-held instruments for neutron detection of radioactive material | |
| Radiation protection instrumentation \x97 Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material | |
| Radio data system (RDS) - Receiver products and characteristics - Methods of measurement | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Part 1: Generic specification | |
| Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Part 2: Guidelines for the use | |
| Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters | |
| Railway applications \x97 Fixed installations \x97 Electric traction \x97 Specific requirements for composite insulators used for overhead contact line systems | |
| Railway applications \x97 Fixed installations \x97 Stationary energy storage system for DC traction systems | |
| Railway applications \x97 Rolling stock \x97 DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications \x97 Rolling stock \x97 Power supply with onboard energy storage system Part 1: Series hybrid system | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 2: Specific procedures for pressure transmitters | |
| Reinforced Concrete Pressure Pipes and Distributed Reinforcement Concrete Pressure Pipes (Non- Cylinder Type), Including Joints and Fittings | |
| Reinforced Concrete Pressure Pipes, Cylinder Type, Including Joints and Fittings | |
| Representation of states of objects by graphical symbols | |
| Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs-RCCBs for household and similar uses | |
| Resilient Floor Coverings - Classification | |
| Resilient Floor Coverings - Determination of Apparent Density of Agglomerated Cork | |
| Resilient Floor Coverings - Determination of Conventional Pattern Depth | |
| Resilient Floor Coverings - Determination of Curling on Exposure to Moisture | |
| Resilient Floor Coverings - Determination of Dimensional Stability of Linoleum Tiles Caused by Changes in Atmospheric Humidity | |
| Resilient Floor Coverings - Determination of Exudation of Plasticizers | |
| Resilient Floor Coverings - Determination of Gelling | |
| Resilient Floor Coverings - Determination of Seam Strength | |
| Resilient Floor Coverings - Determination of the Spreading of Water | |
| Resilient Floor Coverings - Determination of Volatile Loss | |
| Resilient Floor Coverings - Determination of Wear Resistance - Part 1: Stuttgart Test | |
| Resilient Floor Coverings - Determination of Wear Resistance - Part 2: Frick-Taber Test | |
| Resilient Floor Coverings - Expanded (Cushioned) Polyvinyl Chloride Floor Coverings - Specification | |
| Resilient Floor Coverings - Identification of Linoleum and Determination of Cement Content and Ash Residue | |
| Resilient Floor Coverings - Polyvinyl Chloride Floor Coverings on Jute Backing or on Polyester Felt Backing or on Poyester Felt with Polyvinyl Chloride Backing - Specification | |
| Resilient Floor Coverings - Polyvinyl Chloride Floor Coverings with Cork-Based Backing - Specification | |
| Resilient Floor Coverings - Polyvinyl Chloride Floor Coverings with Foam Layer - Specification | |
| Resilient Floor Coverings - Semi-Flexible Polyvinyl Chloride Tiles - Specification | |
| Resilient Floor Coverings - Specification for Corklinoleum | |
| Resilient Floor Coverings - Specification for Plain and Decorative Linoleum on a Corkment Backing | |
| Resilient Floor Coverings - Specification for Plain and Decorative Linoleum on a Foam Backing | |
| Resilient Floor Coverings - Tiles of Aggolmerated Composition Cork with Polyvinyl Chloride Wear Layer - Specification | |
| Resilient floor coverings Homogeneous and heterogeneous polyvinyl chloride floor coverings Specification | |
| Root cause analysis (RCA) | |
| Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures | |
| Safety of Machinery - Reduction of Risk to Health from Hazardous Substances Emitted by Machinery Part 2: Methodology Leading to Verification Procedures | |
| Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers | |
| Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery Part 1: Principles and Specifications for Machinery Manufacturers | |
| Safety of machinery - Requirements for cableless control systems of machinery | |
| Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment | |
| Safety of woodworking machines Part 1: Common requirements | |
| Safety Requirements for Foundry Moulding and Coremaking Machinery and Plant and Associated Equipment | |
| Sample preparation for measurement of mercury level in fluorescent lamps and low-pressure mercury UV radiation sources | |
| Sample preparation for measurement of mercury level in fluorescent lamps | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications Part 1: Performance | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Sealed nickel-metal hydride prismatic rechargeable single cells | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Secondary lithium cells and batteries for use in industrial applications | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 3: Safety requirements | |
| Self-ballasted LED lamps for general lighting services with supply voltages >50 V \x96 Performance requirements | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50V - Safety specifications | |
| Semiconductor devices \x97 Semiconductor interface for human body communication Part 1: General requirements | |
| Semiconductor devices \x97 Semiconductor interface for human body communication Part 2: Characterization of interfacing performances | |
| Semiconductor devices \x97 Semiconductor interface for human body communication Part 3: Functional type and its operational conditions | |
| Spare parts provisioning | |
| Specification for Data Logging and Monitoring of Lifts, Escalators and Passenger Conveyors | |
| Standard practice for marking medical devices and other items for safety in the magnetic resonance environment | |
| Standardized product ontology register and transfer by spreadsheets Part 1: Logical structure for data parcels | |
| Standardized product ontology register and transfer by spreadsheets Part 3: Interface for Common Information Model BS EN 62656-3:2015 | |
| Standardized product ontology register and transfer by spreadsheets Part 5: Interface for activity description | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 1: Generic specification | |
| Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality Part 2: Guidelines for the use | |
| Surface cleaning appliances \x97 Floor treatment machines with or without traction drive, for commercial use \x97 Methods of measuring the performance | |
| Surface cleaning appliances Part 3: Wet carpet cleaning appliances \x97 Methods for measuring the performance | |
| Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems | |
| Terminology for voltagesourced converters (VSC) for high-voltage direct current (HVDC) systems | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 1: Basic requirement | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 2: Interactive data services using BIFS | |
| Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 3: Common API | |
| Test method for erosion of wave soldering equipment using molten lead- free solder alloy Part 3: Selection guidance of erosion test methods | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 1: Erosion test method for metal materials without surface processing | |
| Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 2: Erosion test method for metal materials with surface processing | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) | |
| Text-to-speech for television - General requirements | |
| Thermal Spraying - Terminology, Classification | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing | |
| Thyristor valves for thyristor controlled series capacitors (TCSC) \x97 Electrical testing | |
| Tracked Changes (Redline) - Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines | |
| Tracked Changes (Redline) - Agricultural machinery - Slurry tankers - Safety | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties | |
| Tracked Changes (Redline) - Electric motor-operated hand-held tools, transportable tools and lawn and arden machinery \x96 Safety Part 3-12: Particular requirements for transportable threading machines | |
| Tracked Changes (Redline) - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-2: Particular requirements for hedge trimmers | |
| Tracked Changes (Redline) - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety | |
| Tracked Changes (Redline) - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Tracked Changes (Redline) - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-14: Particular requirements for hand-held planers | |
| Tracked Changes (Redline) - Glass in building - Determination of thermal transmittance (U value) - Calculation method | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) , Part 1: Requirements for connection components | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) Part 3: Requirements for isolating spark gaps (ISG) | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices | |
| Tracked Changes (Redline) - Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board | |
| Tracked Changes (Redline) - Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board | |
| Tracked Changes (Redline) - Power quality measurement in power supply systems Part 1: Power quality instruments (PQI) | |
| Tracked Changes (Redline) - Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing | |
| Tracked Changes (Redline) - Resilient floor coverings \x97 Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing... | |
| Tracked Changes (Redline) - Resilient floor coverings \x97 Specification for plain and decorative linoleum on a foam backing | |
| Tracked Changes (Redline) - Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications | |
| Tracked Changes (Redline) - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems | |
| Tracked Changes (Redline) - Universal serial bus interfaces for data and power Part 1-3: Common components \x96 USB Type-CTM Cable and Connector Specification | |
| Transmitting equipment for radiocommunication \x97 Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems \x97 Measurement method | |
| Transportable Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders Part 1: Specification | |
| Transportable Gas Cylinders - 25E Taper Thread for Connection of Valves to Gas Cylinders Part 2: Gauge Inspection | |
| Ultrasonics \x97 Power measurement \x97 High intensity therapeutic ultrasound (HITU) transducers and systems | |
| Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 | |
| Universal Serial Bus interfaces for data and power Part 1-1: Universal Serial Bus interfaces \x97 Common components \x97 USB Battery Charging Specification, Revision 1.2 (TA 14) | |
| Universal serial bus interfaces for data and power Part 1-2: Common components \x97 USB Power Delivery specification | |
| Universal serial bus interfaces for data and power Part 1-3: Universal Serial Bus interfaces \x97 Common components \x97 USB Type-CTM cable and connector specification | |
| Universal serial bus interfaces for data and power Part 1: Universal serial bus specification, revision 2.0 | |
| Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) | |
| Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus \x97 Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) | |
| Universal serial bus interfaces for data and power Part 2: Universal serial bus \x97 Micro-USB cables and connectors specification, revision 1.01 | |
| Universal Serial Bus interfaces for data and power Part 2\x963: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 (TA 14) | |
| Universal Serial Bus interfaces for data and power Part 3-1: Universal Serial Bus 3.1 Specification | |
| Universal serial bus interfaces for data and power Part 3: USB battery charging specification, Revision 1.2 | |
| Use case methodology Part 2: Definition of the template for use cases, actor list and requirements list | |
| Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts \x96 Particular requirements | |
| Video surveillance systems for use in security applications Part 1-1: System requirements \x97 General | |
| Video surveillance systems for use in security applications Part 1-2: System requirements \x97 Performance requirements for video transmission | |
| Video surveillance systems for use in security applications Part 2-1: Video transmission protocols \x97 General requirements | |
| Video surveillance systems for use in security applications Part 2-2: Video transmission protocols \x97 IP interoperability implementation based on HTTP and REST services | |
| Video surveillance systems for use in security applications Part 2-3: Video transmission protocols \x97 IP interoperability implementation based on Web services | |
| Video surveillance systems for use in security applications Part 3: Analog and digital video interfaces | |
| Video surveillance systems for use in security applications Part 4: Application guidelines | |
| Visible light beacon system for multimedia applications | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing | |
| Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS) | |
| Wireless power transfer - Management Part 2: Multiple device control management | |
| Wireless Power Transfer \x97 Management Part 1: Common Components | |
| Wireless power transfer \x97 Management Part 3: Multiple source control management | |
| Workplace Atmospheres - Guidance for the Assessment of Exposure by Inhalation to Chemical Agents for Comparison with Limit Values and Measurement Strategy |
| << Prev | Next >> |