CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1.1 This Standard applies to tanks, other than intermediate bulk containers and tubes, used for the transportation of dangerous goods primarily by road. It considers the design, construction, certification, assembly,... | |
| Aperçu Depuis 90 ans, le Code canadien de l’électricité, première partie est élaboré et mis à jour dans le but de contribuer à mieux protéger les ouvriers électriciens et de... | |
| B137 A PACKAGE-17 Consists of: B137.0-17 - Definitions, general requirements, and methods of testing for thermoplastic pressure piping Preface This is the tenth edition of CSA B137.0, Definitions, general requirements,... | |
| B137 B PACKAGE-17 Consists of: B137.0-17 - Definitions, general requirements, and methods of testing for thermoplastic pressure piping Preface This is the tenth edition of CSA B137.0, Definitions, general requirements,... | |
| B137 C PACKAGE-17 Consists of: B137.0-17 - Definitions, general requirements, and methods of testing for thermoplastic pressure piping Preface This is the tenth edition of CSA B137.0, Definitions, general requirements,... | |
| Domaine d’application 1.1 Cette norme vise la construction, les exigences générales, les méthodes d'essai, le marquage et les instructions, ces exigences étant communes à quelques-unes ou à toutes les normes... | |
| Domaine d'application 1.1 Cette norme s'applique aux chauffe-eau à mazout raccordés à un carneau et munis de réglages automatiques. Ces chauffe-eau peuvent servir au chauffage des habitations et la production... | |
| Domaine d'application 1.1 Cette norme traite des régulateurs de vitesse à semi-conducteurs pour moteur monophasé ayant une tension et un courant nominaux d'au plus 300 V et 20 A, respectivement,... | |
| Domaine d'application Cette norme s'applique à l'appareillage électrique utilisé avec les machines à bois industrielles ou étroitement lié à ces machines, et conçu pour être installé et utilisé conformément au... | |
| Overview Used by Canadian gas and propane industry workers and referenced in legislation across the country, CSA B149.1-15 - Natural gas and propane code installation code provides guidance on the... | |
| Préface Ce document constitue la onzième édition de la norme combinée CSA A23.1/A23.2, Béton : Constituants et exécution des travaux/Méthodes d'essai et pratiques normalisées pour le béton. Ces normes font... | |
| Préface Ce document constitue la première édition de la CSA A123.51, Pose de bardeaux d'asphalte sur des pentes de toit de 1:6 et plus. Il s'agit de la combinaison de... | |
| Préface Ce document constitue la quatrième édition de la CSA B79, Avaloirs et regards de nettoyage pour usage commercial et d'habitation. Il remplace les éditions antérieures publiées en 2005 sous... | |
| Préface Ce document constitue la troisième édition de la CSA B836, Entreposage, manutention et distribution des carburants aviation dans les aérodromes ; elle remplace l'édition de 2000 et celle de... | |
| Préface Cette norme constitue la troisième édition de CSA B341, Récipients à pression UN et conteneurs à gaz à éléments multiples destinés au transport des marchandises dangereuses. Elle remplace les... | |
| Préface Cette norme constitue la troisième édition de CSA B342, Sélection et utilisation des récipients à pression UN, des conteneurs à gaz à éléments multiples et d’autres récipients à pression... | |
| Preface Special offer for ALL of the 2017 ASME-BPVC codes with Binders. ASME-BPVC-I-2017 - Section 1 - Rules for construction of power boilers ASME-BPVC-II-A-2017 - Section 2 - Materials -... | |
| Preface This is the first edition of ANSI HGV 3.1, Fuel system components for compressed hydrogen gas powered vehicles. This precedes CSA HGV 3.1-2013. Scope 1.1 This Standard establishes requirements... | |
| Preface This is the first edition of ANSI/CSA CHMC 1-2014, Test methods for evaluating material compatibility in compressed hydrogen applications - Metals. It supersedes the previous CSA CHMC 1-2012 edition... | |
| Preface This is the first edition of ANSI/CSA FC-1:2014, Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety, which is an adoption with U.S. deviations of... | |
| Preface This is the first edition of CSA A123.51, Asphalt Shingle Application on Roof Slopes 1:6 and Steeper. It combines CSA CAN3-A123.51-M, Asphalt Shingle Application on Roof Slopes 1:3 and... | |
| Preface This is the fourth edition of C22.2 No. 13, Transformers for oil- or gas-burner ignition equipment, one of a series of Standards issued by CSA Group under Part II... | |
| Preface This is the fourth edition of CSA B79, Commercial and residential drains and cleanouts. It supersedes the previous editions, published in 2005 under the title Floor drains, area drains,... | |
| Preface This is the harmonized ANCE, CSA Group, and UL standard for transfer switch equipment. It is the second edition of NMX-J-672-ANCE, the third edition of CSA C22.2 No. 178.1,... | |
| Preface This is the second edition of CSA A231.1/A231.2, Precast concrete paving slabs/Precast concrete pavers. It supersedes the previous edition published in 2006. The following changes since the publication of... | |
| Preface This is the second edition of CSA C22.2 No. 137 Electric Luminaires for Use in Hazardous Locations. One of a series of Standards issued under the Canadian Electrical Code... | |
| Preface This is the seventh edition of CSA B340, Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2. It supersedes the... | |
| Preface This is the third edition of ANSI NGV 3.1 - CSA 12.3, Fuel system components for compressed natural gas powered vehicles. It supersedes the previous editions published in 2012... | |
| Preface This is the third edition of ANSI Z83.20 • CSA 2.34, Gas-fired tubular and low-intensity infrared heaters. It supersedes the previous editions published in 2008 and 2001. Scope 1.1... | |
| Preface This is the third edition of CSA B341, UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods. It supersedes the previous editions published in 2015... | |
| Preface This is the third edition of CSA B342, Selection and use of UN pressure receptacles, multiple-element gas containers, and other pressure receptacles for the transport of dangerous goods, Class... | |
| Preface This is the third edition of CSA B836, Storage, handling, and dispensing of aviation fuels at aerodromes. It supersedes the 2000 edition and the 2005 edition, which was re-affirmed... | |
| Preface This is the third edition of CSA C22.2 No. 159 Plugs, connectors, receptacles, and similar wiring devices for use in hazardous locations. It supersedes the previous editions published in... | |
| Preface This is the third edition of CSA C22.2 No. 174, Cables and cable glands for use in hazardous locations, one of a series of Standards issued by CSA Group... | |
| Preface This is the sixth edition of CSA B602, Mechanical couplings for drain, waste, and vent pipe and sewer pipe. It supersedes the previous editions published in 2010, 2005, 1999,... | |
| Preface This is the sixth edition of CSA C22.2 No. 124, Mineral-insulated cable. It supersedes the previous editions published in 2004, 1986, 1974, 1966, and 1960. This Standard is issued... | |
| Scope 1.1 This Standard applies to cord-connected, motor-operated floor surfacing and cleaning machines rated at 600 volts or less which are designed to be used in accordance with the Rules... | |
| Scope 1.1 This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control... | |
| Scope 1.1 This Standard covers construction, general requirements, test methods, marking, and instructions that are common to some or all of the CSA B140 series of Standards. 1.2 This is... | |
| Scope 1.1 This standard deals with the safety of electrical appliances for household and similar purposes, the rated voltage of the appliance being not more than 250 V, and for... | |
| Scope This clause of CSA Standard C22.2 No. 1335.1 is applicable except as follows: 1.1 Addition This standard applies to electric kitchen appliances and to accessories intended to be used... | |
| Scope This Specification applies to electrical equipment used on, or in close connection with, woodworking* machinery for use in industrial applications and designed to be installed and employed in accordance... | |
| You must be logged-in for free view access. SAFETY ALERT – Unauthorized Imitation CE Code, Part I, Raises Safety Concerns Overview For 90 years, the Canadian Electrical Code, Part I... | |
| A customized binder for the 2017 ASME boiler and pressure vessel codes. | |
| A165 Série-14 - Normes CSA sur les éléments de maçonnerie en béton Préface Ce document constitue la cinquième édition de la série CSA A165, Normes CSA sur les éléments de... | |
| A165 Series-14 - CSA Standards on concrete masonry units Preface This is the fifth edition of the CSA A165 Series, CSA Standards on concrete masonry units. It supersedes the previous... | |
| A23.1-14/A23.2-14 - Béton : Constituants et exécution des travaux / Méthodes d'essai et pratiques normalisées pour le béton Préface Ce document constitue la douzième édition de la norme combinée CSA... | |
| Access your Ontario Electrical Safety Code like never before with this new digital format. Now you can access important updates, rule interpretations, and ESA Bulletins right from your desktop, mobile... | |
| Addenda 1 to ANSI LC 4-2012/CSA 6.32-2012, Press-connect metallic fittings for use in fuel gas distribution systems | |
| Addenda 1 to ANSI Z21.12-1990, Draft Hoods | |
| Addenda 1 to ANSI Z21.17-1998/CSA 2.7-M98, Domestic Gas Conversion Burners | |
| Addenda 1 to ANSI Z21.18-2007/CSA 6.3-2007, Gas Appliance Pressure Regulators | |
| Addenda 1 to ANSI Z21.40.1-1996/CGA 2.91-M96, Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances | |
| Addenda 1 to ANSI Z21.40.4-1996/CGA 2.94-M96, Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances | |
| Addenda 1 to ANSI Z21.79-1997/CGA 6.21-M97, Gas Appliance Sediment Traps | |
| Addenda 1 to ANSI Z21.81-2005/CSA 6.25-2005, Cylinder Connection Devices | |
| Addenda 1 to ANSI Z21.87-2007/CSA 4.6-2007, Automatic Gas Shutoff Devices For Hot Water Supply Systems | |
| Addenda 1 to ANSI Z21.92-2001/CSA 6.29-2001, Manually Operated Electric Gas Ignition Systems and Components | |
| Addenda 1 to ANSI Z21.94-2006/CSA 6.31-2006, Automatic Flammable Vapor Sensor Systems and Components | |
| Addenda 2 to ANSI Z21.12-1990, Draft Hoods | |
| Addenda 2 to ANSI Z21.79-1997/CGA 6.21-M97, Gas Appliance Sediment Traps | |
| Addenda 2 to ANSI Z21.92-2001/CSA 6.29-2001, Manually Operated Electric Gas Ignition Systems and Components | |
| Aperçu B149.5 vise l'installation, l'entretien et la réparation, sur des véhicules routiers, de composants et de réservoirs de propane. Voici pourquoi l’édition 2015 est indispensable : Les exigences s’appliquant aux... | |
| Aperçu Le Code de l'électricité du Québec comprend le Code canadien de l'électricité, Partie I tel qu'il a été adopté dans la province du Québec. Il comprend des modifications provinciales... | |
| Aperçu Précieuse ressource pour les travailleurs de l’industrie du gaz naturel et du propane de tout le Canada, l’édition 2015 de B149.1 — Code d’installation du gaz naturel et du... | |
| Aperçu Vous devez être connecté pour un accès gratuit à la vue. La sécurité en matière d'électricité au Canada relève de la responsabilité de chaque province et territoire. À titre... | |
| Aperçu B149.3-15 énonce les exigences visant les composants et accessoires relatifs au combustible et leur installation dans des appareils et appareillages utilisant le gaz. Voici pourquoi l'édition 2015 est indispensable... | |
| Aperçu Depuis 90 ans, le Code canadien de l’électricité, première partie est élaboré et mis à jour dans le but de contribuer à mieux protéger les ouvriers électriciens et de... | |
| ASME has been defining piping safety since 1922. ASME B31.1 prescribes minimum requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems typically found in... | |
| B149.3-15 provides requirements for fuel-related components and accessories and their assembly on appliances and equipment utilizing gas. Why You Need to Know the 2015 Edition: Added requirements for shut-off valves,... | |
| B149.5-15 applies to the installation, servicing and repair of propane fuel system components and tanks on highway vehicles. Why you Need to Know the 2015 Edition: Requirements for other motorized... | |
| B354.13-F17/B354.14- F17 - Usage sécuritaire et meilleures méthodes pour les plates-formes de transport se déplaçant le long de mâts (MCTP) / Formation reliée aux plates-formes de transport se déplaçant le... | |
| Boilers, pressure vessels, pressure piping and fittings pose potential health and safety risks if they are not designed, installed, operated and/or maintained in accordance with the latest edition of B51. | |
| C22.10-10, Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments Scope This twenty-first edition of the Canadian Electrical Code, Part I, was... | |
| CAN/CSA-B354.7:17 - Mobile elevating work platforms — Safety principles, inspection, maintenance and operation CSA Preface This is the first edition of CAN/CSA-B354.7, Mobile elevating work platforms — Safety principles, inspection,... | |
| Ce document constitue la quatrième édition de la Norme sur les climatiseurs et les thermopompes monoblocs, publiée conjointement par l’Air-Conditioning, Heating, and Refrigeration Institute (AHRI 310/380) et Groupe CSA (CSA... | |
| CSA Group introduces Interactive Standards. Now you can access up-to-date information on important codes and standards from your tablet or mobile device... without the need for an internet connection. No... | |
| CSA Preface This is the first edition of CSA B175.3, Internal combustion engine–powered hand-held grass trimmers and brushcutters — Safety and environmental requirements, which is an adoption without modification of... | |
| CSA Preface This is the first edition of CSA B175.4, Portable, handheld, internal combustion engine–powered cut-off machines — Safety and environmental requirements, which is an adoption without modification of the... | |
| Digester and landfill gases are widely used as fuel to produce electricity, drive pumps and fire boilers. It is crucial to understand the safety requirements as the migration of these... | |
| Domaine d’application 1.1 Cette norme s'applique aux appareils ou accessoires fixes qui mesurent ou commandent au moyen de signaux, directement, un processus industriel, ou indirectement par l'intermédiaire de dispositifs de... | |
| Domaine d’application 1.1 La présente norme porte sur les transformateurs à cordon d'alimentation et directement enfichable destinés à être utilisés à l'intérieur et conçus pour être reliés à une dérivation... | |
| Domaine d’application 1.1 Généralités Cette norme énonce les exigences relatives à la fabrication, à l'inspection, à la mise à l'essai, au marquage, à la requalification, aux nouveaux traitements thermiques, à | |
| Domaine d’application 1.1 Cette norme s'applique aux réservoirs portatifs d'une capacité nominale de 5 gallons (25 L), en métal ou en plastique, conçus pour le stockage et le transport de... | |
| Domaine d’application 1.1 Cette norme vise les climatiseurs individuels à cordon d'une tension nominale maximale de 250 V, monophasés, dont la puissance colorifique nominale est d'au plus 36 000 Btu/h... | |
| Domaine d’application 1.1 Sous réserve des dispositions de l'article 1.2, la présente norme porte sur les jouets électriques à usage domestique dont le fonctionnement est prévu pour un potentiel nominal... | |
| Domaine d'application 1.1 Objectifs Cette norme s'adresse aux organismes qui désirent offrir aux personnes handicapées un service à la clientèle de qualité égale à celle du service fourni à l'ensemble... | |
| Domaine d'application 1.1 Cette norme traite des réservoirs de carburant portatifs, d'une capacité nominale maximale de 30 L (7 gallons canadiens), conçus pour être raccordés aux moteurs à essence à | |
| Domaine d'application Les modifications propres au Québec sont imprimées sur des pages bleues et incorporées en début du Code canadien l'électricité. De plus, une fleur de lys dans la marge... | |
| Domaine d'application 1.1 La présente norme stipule les prescriptions minimales relatives aux gicleurs conçus pour installation sur des brûleurs à l'huile à pulvérisation sous pression. 1.2 La présente norme comprend... | |
| Grease interceptors help protect the environment by reducing the amount of organic fats, oils and greases entering wastewater disposal systems from food production kitchens and facilities. B481 Series 12 -... | |
| Hydrogen fueling station The hydrogen gas industry's emphasis on safety led to the development of ANSI/CSA HGV 4.7-2013 Automatic Valves for use in Gaseous Hydrogen Vehicle Fueling Stations. This standard... | |
| In recent years, there have been a growing number of building guard failures in Canada, some involving a number of prominent buildings in major cities. While many of these incidents... | |
| Intended Use This Standard is intended to assist code enforcement officials and purchasers of steel building systems in determining the suitability and quality of steel buildings. Because the manufacturer of... | |
| Introducing the Canadian Electrical Code Handbook Notice to Québec Construction Code Users The 2018 edition of the Québec Construction Code, Chapter V – Electricity (C22.10-18) incorporates the 2015 edition of... | |
| L’édition 2018 du Chapitre V - Électricité du Code de construction du Québec comprend le Code canadien de l’électricité, Première partie (vingt-troisième édition) de 2015, adopté par la province du... | |
| L’installation non conforme de systèmes d’évacuation des eaux usées peut entraîner une contamination bactérienne ou chimique du service d’eau public en raison d’un refoulement accidentel et d’une exposition au rejet... | |
| L'édition 2015 de B149.2 - Code sur le stockage et la manipulation du propane reflète les dernières avancées en matière de pratiques exemplaires sectorielles et les exigences de sécurité les... | |
| Les gaz de digestion et d'enfouissement sont largement utilisés comme combustible pour produire de l'électricité et pour faire fonctionner des pompes et des chaudières. La compréhension des exigences de sécurité | |
| Mechanical refrigeration systems: The 11th edition of CSA B52 provides minimum requirements for the design, construction, installation, inspection, and maintenance of mechanical refrigeration systems. It contains recommendations and best practices... | |
| New for 2016, CSA B149.2 is now available in our powerful E-Pub format. The E-Pub format makes accessing the standard easier than ever. Available for iOS and Android mobile devices... | |
| New for 2016, CSA B149.3 is now available in our powerful E-Pub format. The E-Pub format makes accessing the standard easier than ever. Available for iOS and Android mobile devices... | |
| Ontario Customers: The B139 Series-15 dated January 2015 is the version currently in force in Ontario. Click here to download the January 2015 pages that were affected by Update No. | |
| Overview Due to the inherent health risks associated with the use of non-potable water, CSA Group has published CSA B128.3 - Performance of Non-Potable Water Treatment Systems - which specifies... | |
| Overview Ensuring strength and safety are primary considerations for developers working with concrete; the 12th edition of CSA A23.1 covers requirements for materials and methods of construction for cast-in-place concrete... | |
| Overview This standard contains safety requirements for material, design, manufacture and testing of gaseous hydrogen compressor packages used in fueling station service, designed primarily to provide compressed hydrogen for vehicle... | |
| Overview An important resource for gas and propane industry workers across Canada, the 2015 edition of B149.1-15 - Natural gas and propane installation code reflects the latest advances in technology... | |
| Overview B149.5-15 applies to the installation, servicing and repair of propane fuel system components and tanks on highway vehicles. Why you Need to Know the 2015 Edition: Requirements for other... | |
| Overview CSA C22.2, No.100 is one of a series of standards under Part II of the Canadian Electrical Code. It applies to electric motors and generators for installation and use,... | |
| Overview Digester and landfill gases are widely used as fuel to produce electricity, drive pumps and fire boilers. It is crucial to understand the safety requirements as the migration of... | |
| Overview Electrical safety in Canada is the responsibility of individual provinces and territories. As an electrical industry professional, you are responsible for understanding the legislation and regulations in your jurisdiction... | |
| Overview Improper installation of household appliances -- including furnaces, boilers, stoves, ranges, factory-built fireplaces and water heaters – are a leading cause of house fires and carbon monoxide poisoning. This... | |
| Overview Improperly installed fuel-burning appliances are a leading cause for consumer fires. This code provides the minimum requirements for installing appliances, equipment and components -- including space/service water heating, power... | |
| Overview Improperly installed fuel-burning appliances are a leading cause of residential and industrial fires. B139 SERIES-15 provides the minimum requirements for installing oil-burning appliances, equipment and components to help keep... | |
| Overview Inadequate construction practices and premature deterioration of concrete is not only costly but poses a safety threat to the community at large. CSA Group has created this standard to... | |
| Overview Industry need for a standard addressing safety requirements for hydrogen dispensing systems was the catalyst for CSA Group to create this document. ANSI/CSA HGV 4.1-2013 - Hydrogen Dispensing Systems... | |
| Overview Industry need for a standard addressing safety requirements for hydrogen hoses was the catalyst for CSA Group to create this document. ANSI/CSA HGV 4.2-2013 - Hoses for Compressed Hydrogen... | |
| Overview L'installation inadéquate d’appareils électroménagers, tels les générateurs d'air chaud, les chaudières, les poêles-cuisinières, les cuisinières, les foyers préfabriqués et les chauffe-eau domestiques, constitue la principale cause d’incendies domestiques et... | |
| Overview Les chaudières, les appareils, les tuyauteries et les accessoires sous pression constituent des risques potentiels pour la santé et la sécurité si leur conception, leur installation, leur opération ou... | |
| Overview Properly installed wastewater drainage systems can create bacterial or chemical contamination of the public water supply due to accidental backflow and exposure to discharge. This standard helps protect consumers... | |
| Overview Scope 1.1 This Standard covers manual transfer panels having maximum ratings of 250 V, 60 A, for use in non-hazardous locations in accordance with the Canadian Electrical Code, Part... | |
| Overview Targeting Canadian gas and propane industry workers, this standard reflects the latest advances in technology and corresponding safety requirements. It has been reviewed by regulatory authorities across Canada, and... | |
| Overview The 2015 Canadian Electrical Code Handbook provides background information on the rationale behind the requirements in the Canadian Electrical Code, Part I, and gives an explanation of the rules... | |
| Overview The B149.6-11 - Code for Digester Gas and Landfill Gas Installations Digester and landfill gases are widely used as fuel to produce electricity, drive pumps and fire boilers. The... | |
| Overview The design and construction of electrical equipment for elevators and escalators presents complex requirements in the application of industrial control equipment and elevator equipment. With the need to have... | |
| Overview The Quebec Electrical Code is comprised of the Canadian Electrical Code, Part I as adopted in the Province of Quebec. It includes Quebec provincial amendments. The Canadian Electrical Code,... | |
| Overview The Technical Standards & Safety Authority (TSSA) has published a Code Adoption Document (CAD) for use in conjunction with the 2015 CSA B139 SERIES and serves as a collection... | |
| Overview This standard was developed after the hydrogen gas industry demonstrated the need for safety guidelines for breakaway devices used for dispensing hoses and systems. ANSI/CSA HGV 4.4-2013 - Breakaway... | |
| Overview Understanding and applying the requirements of the 2015 Canadian Electrical Code helps ensure the safety of your electrical installations and reduces the need for costly reworks that can help... | |
| Overview Understanding and applying the requirements of the 2018 Canadian Electrical Code, Part I is a critical component that can impact the safety of your electrical installations and reduces the... | |
| Overview You must be logged-in for free view access. Electrical safety in Canada is the responsibility of individual provinces and territories. As an electrical industry professional, you are responsible for... | |
| Prèface Ce document constitue la cinquième édition de la CSA B621, Sélection et utilisation des citernes routières, des citernes amovibles TC et autres grands contenants pour le transport des marchandises... | |
| Prèface Ce document constitue la quatrième édition de la CSA B622, Sélection et utilisation des citernes routières, des citernes amovibles TC et des contenants d'une tonne pour le transport des... | |
| Prèface Ce document constitue la sixième édition de la CSA B45.6, Toilettes sans recirculation, toilettes àaspiration et réservoirs de rétention pour véhicules de camping. Il remplace les éditions précédentes publiées... | |
| Prèface Ce document constitue la troisième édition de la CSA B140.2.1, Brûleurs à mazout à pulvérisation. Il remplace les éditions précédentes publiées en 1990 et 1973. Domaine d'application 1.1 Cette... | |
| Préface Ce document constitue la troisième édition de l'AAMA/WDMA/CSA 101/I.S.2/A440, Norme nord-américaine sur les fenêtres (NAFS)/Spécification relative aux fenêtres, aux portes et aux lanterneaux. Il remplace l'édition précédente, publiée en... | |
| Préface CSA Ce document constitue la quatrième édition du Code de sécurité sur les ascenseurs ou monte-charges et les escaliers mécaniques ASME A17.1/CSA B44. Il remplace l’édition précédente de l’ASME... | |
| Préface CSA Ce document constitue la première édition de l’ASME A17.8/CSA B44.8, Norme sur les ascenseurs de tour d’éolienne. Au départ, les ascenseurs de tour d’éolienne étaient visés par l’article... | |
| Préface Ce document constitue la deuxième édition de la CSA B52HB, Guide pratique pour l’utilisation de la CSA B52-13, Code sur la réfrigération mécanique. L’objectif premier de ce guide préparé | |
| Préface Ce document constitue la deuxième édition de la CSA B625, Citernes mobiles pour le transport des marchandises dangereuses, et remplace l'édition précédente publiée en 2008. Cette norme fait partie... | |
| Préface Ce document constitue la onzième édition de la CSA B52, Code sur la réfrigération mécanique et remplace les éditions précédentes publiées en 2005, 1999, 1995, 1992, 1991, 1983, 1977,... | |
| Préface Ce document constitue la première édition de CSA A123.25, Panneaux asphaltiques pour couverture. Cette norme vise à présenter les exigences minimales relatives aux panneaux asphaltiques utilisés comme supports de... | |
| Préface Ce document constitue la première édition de la CSA B128.3, Performances des systèmes de réutilisation de l'eau non potable. L'élaboration de cette norme a été possible grâce à la... | |
| Préface Ce document constitue la quatrième édition d'AAMA/WDMA/CSA 101/I.S.2/A440, Norme nord- américaine sur les fenêtres/Spécificati on relative aux fenêtres, aux portes et aux lanterneaux. Il remplace l’édition précédente, publiée en... | |
| Préface Ce document constitue la septième édition de CSA B339, Bouteilles à gaz cylindriques et sphériques et tubes pour le transport des marchandises dangereuses. Il remplace les éditions précédentes publiées... | |
| Préface Ce document constitue la sixième édition de la CSA A277, Mode opératoire visant la certification des bâtiments, des modules et des panneaux préfabriqués. Il remplace l’édition précédente publiée en... | |
| Préface Ce document constitue la sixième édition de la CSA B339, Bouteilles à gaz cylindriques et sphériques et tubes pour le transport des marchandises dangereuses, et remplace les éditions précédentes... | |
| Préface Ce document constitue la cinquième édition de la CSA B620, Citernes routières et citernes amovibles TC pour le transport des marchandises dangereuses. Il remplace l'édition précédente publiée en 2009... | |
| Préface Ce document constitue la cinquième édition de la CSA B622, Sélection et utilisation des citernes routières, des citernes amovibles TC et des contenants d'une tonne pour le transport des... | |
| Préface Ce document constitue la deuxième édition de l'A440S1, Supplément canadien à l'AAMA/WDMA/ CSA 101/I.S.2/A440 - Norme nord-américaine sur les fenêtres (NAFS)/Spécification relative aux fenêtres, aux portes et aux lanterneaux. | |
| Préface Ce document constitue la deuxième édition de l'AAMA/WDMA/CSA 101/I.S.2/A440, Norme nord-américaine sur les fenêtres (NAFS)/Spécification relative aux fenêtres, aux portes et aux lanterneaux. Il remplace l'édition précédente, publiée en... | |
| Préface Ce document constitue la deuxième édition de la CSA B140.10, Appareils de chauffage à air chaud au mazout pour logements mobiles et véhicules de camping et remplace l'édition précédente... | |
| Préface Ce document constitue la deuxième édition de la CSA B55.1, Méthode d'essai pour la mesure de l'efficacité et de la perte de charge des récupérateurs de chaleur des eaux... | |
| Préface Ce document constitue la deuxième édition de la CSA B55.2, Récupérateurs de chaleur des eaux grises et remplace l'édition précédente publiée en 2012. Cette norme énonce les exigences en... | |
| Préface Ce document constitue la deuxième édition de la CSA B651.1, Conception accessible des guichets automatiques bancaires. Il remplace la première édition publiée en 2002 et intitulée Règles de conception... | |
| Préface Ce document constitue la deuxième édition de la norme CSA B196.3, Conduits et raccords pour câbles de télécommunication souterrains en PVC et remplace la première édition publiée en 1975. | |
| Préface Ce document constitue la dixième édition de la CSA B149.2, Code sur le stockage et la manipulation du propane. Cette édition remplace les éditions précédentes publiées en 2005 et... | |
| Préface Ce document constitue la première édition de CSA B354.10/CSA B354.11, Usage sécuritaire et meilleures méthodes pour les plates-formes de travail se déplaçant le long de mâts (MCWP) / Formation... | |
| Préface Ce document constitue la première édition de CSA B354.12, Conception, calculs, exigences relatives à la sécurité et méthodes d’essai pour les plates-formes de transport se déplaçant le long de... | |
| Préface Ce document constitue la première édition de l'ASME A112.19.3/CSA B45.4, Appareils sanitaires en acier inoxydable. Domaine d'application 1.1 Cette norme vise les appareils sanitaires en alliage d'acier inoxydable, et... | |
| Préface Ce document constitue la première édition de la CSA A344, Guide de l'utilisateur des palettiers en acier. Il remplace la CSA A344.1 publiée en 2005 sous le même titre. | |
| Préface Ce document constitue la première édition de la CSA A500, Garde-corps. Cette norme a été rédigée en réponse aux parties intéressées qui demandaient une norme visant les matériaux, la... | |
| Préface Ce document constitue la première édition de la CSA B65, Code d'installation des systèmes d'assainissement décentralisés. Domaine d'application 1.1 1.1.1 Ce code vise les systèmes d'assainissement décentralisés dotés de... | |
| Préface Ce document constitue la quatorzième édition de la CSA B149.1, Code d'installation du gaz naturel et du propane. Cette édition remplace les éditions précédentes publiées en 2005 et en... | |
| Préface Ce document constitue la quatrième édition de la CSA B149.3, Code d'approbation sur place des composants relatifs au combustible des appareils et appareillages et remplace les éditions précédentes publiées... | |
| Préface Ce document constitue la quatrième édition de la CSA B149.5, Code d'installation des réservoirs et des systèmes d'alimentation en propane sur les véhicules routiers. Il remplace les éditions précédentes... | |
| Préface Ce document constitue la quatrième édition de la CSA B167, Ponts roulants, grues portiques, monorails, palans et potences. Il remplace les éditions suivantes : la troisième édition intitulée Ponts... | |
| Préface Ce document constitue la quatrième édition de la CSA B214, Code d'installation des systèmes de chauffage hydronique. Il remplace les éditions précédentes publiées en 2012, 2007 et 2001. Les... | |
| Préface Ce document constitue la quatrième édition de la CSA B366.1, Appareils à combustibles solides pour chauffage central. Il remplace les éditions précédentes publiées en 1991, 1987 et 1981. Domaine... | |
| Préface Ce document constitue la quatrième édition de la CSA B620, Citernes routières et citernes amovibles TC pour le transport des marchandises dangereuses. Il remplace les éditions antérieures publiées en... | |
| Préface Ce document constitue la sixième édition de la CSA A23.4, Béton préfabriqué - Constituants et exécution des travaux. Il remplace les éditions précédentes, publiées en 2009, 2005, 2000, 1994... | |
| Préface Ce document constitue la sixième édition de la CSA B340, Sélection et utilisation de bouteilles à gaz cylindriques et sphériques, tubes et autres contenants pour le transport des marchandises... | |
| Préface Ce document constitue la sixième édition de la CSA B45.7, Toilettes chimiques, autonomes et àrecirculation pour véhicules de camping. Il remplace les éditions précédentes publiées en 2002, 1999, 1994,... | |
| Préface Ce document constitue la sixième édition de la CSA B602, Joints mécaniques pour tuyaux d'évacuation, de ventilation et d'égout. Il remplace les éditions précédentes publiées en 2010, 2005, 1999,... | |
| Préface Ce document constitue la troisième édition de CSA B109, Code d’installation du gaz naturel pour les véhicules. Il remplace l’édition antérieure publiée en 2014 sous le même titre et... | |
| Préface Ce document constitue la troisième édition de l'A440S1, Supplément canadien à l'AAMA/WDMA/CSA 101/I.S.2/A440-11, Norme nord-américaine sur les fenêtres (NAFS)/Spécification relative aux fenêtres, aux portes et aux lanterneaux. Il remplace... | |
| Préface Ce document constitue la troisième édition de la CSA A123.5, Bardeaux d’asphalte en feutre de fibres de verre et à surfaçage minéral. Il remplace la norme CSA qui regroupe... | |
| Préface Ce document constitue la troisième édition de la CSA B335, Norme de sécurité pour les chariots élévateurs et remplace les éditions antérieures publiées en 2004 et 1994. Cette norme... | |
| Préface Ce document constitue la troisième édition de la CSA B352.0, Structures de protection contre le retournement (ROPS), structures de protection contre les chutes d'objets (FOPS), structures de protection de... | |
| Préface Ce document constitue la troisième édition de la CSA B415.1, Essais de rendement des appareils de chauffage à combustibles solides. Il remplace l'edition précédente, publiée en 2000 sous le... | |
| Préface Ce document constitue la troisième édition de la norme CSA B242, Raccords mécaniques pour tuyaux à rainure et à épaulement et remplace les éditions précédentes publiées en anglais seulement,... | |
| Préface Ce document constitue la troisième édition de la norme CSA B620, Citernes routières et citernes amovibles pour le transport des marchandises dangereuses, et remplace les éditions antérieures publiées en... | |
| Préface Cet ouvrage renferme la septième édition de la CSA B64.10, Sélection et installation des dispositifs antirefoulement, et la quatrième édition de la CSA B64.10.1, Entretien et mise à l’essai... | |
| Préface Cette norme constitue la deuxième édition de la CSA B341, Récipients à pression UN et conteneurs à gaz à éléments multiples destinés au transport des marchandises dangereuses. Ce document... | |
| Préface Cette norme constitue la deuxième édition de la CSA B342, Sélection et utilisation des récipients à pression UN, des conteneurs à gaz à éléments multiples et d’autres récipients à | |
| Présentation du produit Ce produit est offert en TÉLÉCHARGEMENT GRATUIT. Option 1 – Cliquez sur le bouton "Téléchargement gratuit" ci-dessous pour accéder au document PDF et le sauvegarder localement, sans... | |
| Présentation du produit Ce produit est offert en TÉLÉCHARGEMENT GRATUIT. Option 1 – Cliquez sur le bouton « Téléchargement gratuit » ci-dessous pour accéder au document PDF et le sauvegarder... | |
| Preface Addenda 1 to ANSI Z21.57-2010, Recreational vehicle cooking gas appliances | |
| Preface Addenda 1 to ANSI Z21.80-2011/CSA 6.22-2011, Line pressure regulators | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-3-2017 addresses... | |
| Preface ASME-BPVC-IX-2017 is another "service Code" - containing rules relating to the qualification of welding, brazing, and fusing procedures as required by other BPVC Sections. It also covers rules relating... | |
| Preface ASME-BPVC-V-2017 is another "service Code" - containing requirements and methods for nondestructive examination which are referenced and required by other BPVC Sections. It also includes manufacturer's examination responsibilities, duties... | |
| Preface ASME-BPVC-VI-2017 covers operation guidelines applicable to steel and cast-iron boilers limited to the operating ranges of Section IV Heating Boilers. Section VI includes guidelines for associated controls and automatic... | |
| Preface ASME-BPVC-VII-2017 provides guidelines to assist those directly responsible for operating, maintaining, and examining power boilers. These boilers include stationary, portable, and traction type boilers, but not locomotive and high-temperature... | |
| Preface ASME-BPVC-VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be... | |
| Preface ASME-BPVC-X-2017 provides requirements for construction of a fiber-reinforced plastic pressure vessel (FRP) in conformance with a manufacturer's design report. It includes production, processing, fabrication, inspection and testing methods required... | |
| Preface ASME-BPVC-XI-2017 provides rules for the examination, inservice testing and inspection, and repair and replacement of components and systems in light water cooled nuclear power plants. Application of Section XI... | |
| Preface ASME-BPVC-XII-2017 provides requirements for construction and continued service of pressure vessels for the transportation of dangerous goods via highway, rail, air or water at pressures from full vacuum to... | |
| Preface This is the first edition of CSA B354.10/B354.11, Safe use and best practices for mast climbing work platforms (MCWPs)/ Training for mast climbing work platforms (MCWPs). With respect to... | |
| Preface This is the fourteenth edition of CSA B149.1, Natural gas and propane installation code. It supersedes the previous editions, published in 2005 and 2000 by the Canadian Standards Association... | |
| Preface This is the fourth edition of ANSI Z21.76, Gas-fired unvented catalytic room heaters for use with propane gas. It supersedes the previous editions published in 1994, 1991, and 1988. | |
| Preface 1.1 This Standard applies to complete flue-connected, oil-fired service water heaters that are provided with automatic control devices. These service water heaters may be used both for heating and... | |
| Preface This is the fifth edition of CSA A3000, Cementitious materials compendium. It supersedes the previous editions published in 2013, 2008, 2003, and 1998. Significant changes from the previous edition... | |
| Preface This is the fifth edition of CSA B651, Accessible design for the built environment. It supersedes the previous editions published in 2012 and 2004 under the same title, and... | |
| Preface This is the first edition of ANSI/CSA HGV 4.3, Test methods for hydrogen fueling parameter evaluation. It replaces the previous edition published in 2012 as CSA HGV 4.3. Scope... | |
| Preface This is the first edition of CSA A123.25, Asphalt core boards used in roofing. This Standard is intended to provide minimum requirements for asphalt core boards intended for use... | |
| Preface This is the first edition of CSA B401, Vehicle maintenance facilities code. CSA Group acknowledges that the development of this Code was made possible, in part, by the financial... | |
| Preface This is the first edition of CSA B52HB, A practical handbook for implementing CSA 652, Mechanical refrigeration code. The primary objective of this handbook is to provide both novice... | |
| Preface This is the first edition of CSA B651HB, Accessible design for the built environment — Implementation handbook. This Handbook was developed as a complementary guide to the fifth edition... | |
| Preface This is the fourth edition of AAMA/WDMA/CSA 101/I.S.2/A440 — North American Fenestration Standard/Specificati on for windows, doors, and skylights. It supersedes the previous edition published in 2011 under the... | |
| Preface This is the fourth edition of ASME A112.18.1/CSA B125.1, Plumbing supply fittings. It supersedes the previous edition published in 2012. Together with ASME A112.18.2/CSA B125.2, Plumbing waste fittings, CSA... | |
| Preface This is the fourth edition of ASME A17.1/CSA B44, Safety Code for Elevators and Escalators. It replaces the previous editions of ASME A17.1/CSA B44, published in 2013, 2010, and... | |
| Preface This is the fourth edition of CSA B108, Natural gas refuelling stations installation code. It supersedes the previous editions published in 2014, 1999, and 1995, under the title Compressed... | |
| Preface This is the fourth edition of CSA C22.2 No. 120, Refrigeration equipment, one of a series of Standards issued by CSA Group under Part II of the Canadian Electrical... | |
| Preface This is the harmonized ANCE, CSA, and UL standard for electrical motors and generators. It is the first edition of NMX-J-652-ANCE, the third edition of CSA-C22.2 No. 145, and... | |
| Preface This is the harmonized CSA and UL Standard for Single Pole Locking-Type Separable Connectors. It is the First edition of CSA C22.2 No. 1691 and the First edition of... | |
| Preface This is the harmonized CSA Group and UL Standard for Electric Clothes Washing Machines and Extractors. It is the fifth edition of CSA C22.2 No. 169, and the fourth... | |
| Preface This is the harmonized CSA Group and UL Standard for Household Dishwashers. It is the eighth edition of CSA C22.2 No. 167 and the eleventh edition of UL 749. | |
| Preface This is the second edition of ASME A112.3.4/CSA B45.9, Macerating toilet systems and waste-pumping systems for plumbing fixtures. This Standard supersedes ASME A112.3.4-2013/CSA B45.9-13, Plumbing fixtures with pumped waste... | |
| Preface This is the second edition of CSA B52 HB, A practical handbook for implementing CSA B52-13, Mechanical refrigeration code. The primary objective of this handbook is to provide both... | |
| Preface This is the second edition of CSA B625, Portable tanks for the transport of dangerous goods. It supersedes the previous edition, published in 2008. This Standard is one of... | |
| Preface This is the seventh edition of CSA B339, Cylinders, spheres, and tubes for the transportation of dangerous goods. It supersedes the previous editions published in 2014, 2008, 2002, 1996,... | |
| Preface This is the sixth edition in the form of a compendium of the CSA B181 and CSA B182 series of Standards, published as CSA B1800, Thermoplastic nonpressure piping compendium. | |
| Preface This is the sixth edition of CSA A277, Procedure for certification of prefabricated buildings, modules, and panels. It supersedes the previous edition, published in 2008 under the title Procedure... | |
| Preface This is the sixth edition of CSA B339, Cylinders, spheres, and tubes for the transportation of dangerous goods. It supersedes the previous editions published in 2008, 2002, 1996, 1988,... | |
| Preface This is the sixth edition of the CSA B137 Series of Standards, Thermoplastic pressure piping compendium. It supersedes the previous editions published in 2013, 2009, 2005, 2002, and 1999. | |
| Preface This is the tenth edition of CSA B52, Mechanical refrigeration code. It supersedes the previous editions published in 1999, 1995, 1992, 1991, 1983, 1977, 1965, 1951, and 1939. Scope... | |
| Preface This is the third edition of ASME A112.19.1/CSA B45.2, Enamelled cast iron and enamelled steel plumbing fixtures. It supersedes the previous edition, published in 2013. This Standard is considered... | |
| Preface Addenda 1 to ANSI Z21.15-2009/CSA 9.1-2009, Manually operated gas valves for appliances, appliance connector valves and hose end valves. | |
| Preface Addenda 1 to ANSI Z21.20-2005, Automatic Gas Ignition Systems and Components | |
| Preface Addenda 1 to ANSI Z21.40.2-1996/CGA 2.92-M96, Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion) | |
| Preface Addenda 1 to ANSI Z21.71-1993, Automatic Intermittent Pilot Ignition Systems for Field Installation | |
| Preface Addenda 1 to ANSI/IAS U.S. LC 2-1996, Direct Gas-Fired Circulating Heaters for Agricultural Animal Confinement Buildings | |
| Preface Addenda 2 to ANSI Z21.15-2009/CSA 9.1-2009, Manually operated gas valves for appliances, appliance connector valves and hose end valves | |
| Preface Addenda 2 to ANSI Z21.18-2007/CSA 6.3-2007, Gas Appliance Pressure Regulators | |
| Preface ASME has been defining piping safety since 1922. ASME B31.3 contains requirements for piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related... | |
| Preface ASME-BPVC-Code Cases are approved actions by the BPVC Committees on these alternatives, intended to allow early and urgent implementation of any revised requirements. They are issued four times per... | |
| Preface ASME-BPVC-I-2017 provides requirements for all methods of construction of power, electric, and miniature boilers; high temperature water boilers, heat recovery steam generators, solar receiver steam generators, and certain fired... | |
| Preface ASME-BPVC-II-Part A covers Ferrous Material; Part B covers Nonferrous Material; Part C covers Welding Rods, Electrodes, and Filler Metals; and Part D covers Material Properties in both Customary and... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-NB-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-NC-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-ND-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-NE-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-NF-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-1-NG-2 017... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-2-2017 addresses... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-5-2017 provides... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-A-2017 contains... | |
| Preface ASME-BPVC-III provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity. ASME-BPVC-III-NCA-20 17... | |
| Preface ASME-BPVC-IV-2017 provides requirements for design, fabrication, installation and inspection of steam heating, hot water heating, hot water supply boilers, and potable water heaters intended for low pressure service that... | |
| Preface Boilers, pressure vessels, pressure piping and fittings pose potential health and safety risks if they are not designed, installed, operated and/or maintained in accordance to the seventeenth edition of... | |
| Preface Ce document constitue la cinquième édition de la CSA C22.2 nº 106, Fusibles à haut pouvoir de coupure (HRC-MISC) et fait partie d'une série de normes qui constituent le... | |
| Preface Ce document constitue la deuxième édition de la CSA B140.7, Appareils de combustion au mazout: chaudières à vapeur et à eau chaude. Cette édition englobe et remplace la CSA... | |
| Preface Ce document constitue la huitième édition de CSA B365, Code d'installation des appareils à combustibles solides et du matériel connexe. II remplace les éditions antérieures publiées en 2010, 2001,... | |
| Preface Ce document constitue la première édition de CSA B354.9, Conception, calculs, exigences relatives à la sécurité et méthodes d’essai pour des plates-formes de travail élévatrices (MCWP). En ce qui... | |
| Preface Ce document constitue la première édition de la CSA A123.23, Spécification de produit pour les feuilles en bitume modifié par polymère, préfabriquées et armées. Certaines petites erreurs trouvées dans... | |
| Preface Ce document constitue la quatrième édition de la CSA B621, Sélection et utilisation des citernes routières, des citernes amovibles TC et autres grands contenants pour le transport des marchandises... | |
| Preface Ce document constitue la sixième édition de la CSA A23.3, Calcul des ouvrages en béton. Il remplace les éditions précédentes publiées en 2004, 1994, 1984, 1977 (unités métriques), 1973... | |
| Preface his is the sixth edition of CSA C22.2 No. 115, Meter-mounting devices, one of a series of Standards issued by CSA Group under the Canadian Electrical Code, Part II. | |
| Preface L’installation non conforme d’appareils de combustion au mazout est la principale cause d’incendies résidentiels. Ce code énonce les exigences minimales pour l’installation d’appareils, de matériel et de composants – | |
| Preface Note: In the designation for this Standard, and for all of its parts, "ANSI/CSA C448" has been changed to "ANSI/ CSA/IGSHPA C448". This change applies to all references throughout... | |
| Preface Note: In the designation for this Standard, and for all of its parts, "ANSI/CSA C448" has been changed to "ANSI/ CSA/IGSHPA C448". This change applies to all references throughout... | |
| Preface Special offer for ALL of the 2017 ASME-BPVC codes. ASME-BPVC-I-2017 - Section 1 - Rules for construction of power boilers ASME-BPVC-II-A-2017 - Section 2 - Materials - Part A... | |
| Preface Supplement #1 to B52-05, Mechanical refrigeration code. | |
| Preface The ultimate purpose for this document is that it constitute the performance standard for North America regarding fueling station reciprocating compressors applicable to dispensing natural gas to vehicles. Major... | |
| Preface This document is the first edition of ASME A17.7 / CSA B44.7, Results-based Safety Code for Elevators, Elevators and Escalators. This is a fully harmonized binational code. Scope 1.1.1... | |
| Preface This Handbook provides background information on the reasons behind the requirements in the Canadian Electrical Code, Part I, and gives an explanation of each Rule in plain, easy-to-understand language. | |
| Preface This is the 7th edition of ANSI Z83.18, Recirculation direct gas-fired heating and forced ventilation appliances for commercial and industrial applications. It supersedes the previous editions published in 2015,... | |
| Preface This is the common CSA Group, and UL standard for Commercial Dishwashers. It is the Second edition of CSA C22.2 No. 168, the Second edition of ANSI/CSA Z83.21, and... | |
| Preface This is the eighth edition of ANSI Z21.10.3 / CSA 4.3, Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and... | |
| Preface This is the eighth edition of ANSI Z21.50/CSA 2.22, Vented decorative gas appliances. It supersedes the previous editions published in 2014, 2012, 2007, 2003, 2000, 1998, and 1996. Scope... | |
| Preface This is the eighth edition of ANSI Z21.88 • CSA 2.33, Vented gas fireplace heaters. It supersedes the previous editions published in 2016, 2014, 2009, 2005, 2002, 2000, and... | |
| Preface This is the eighth edition of CSA B365, Installation code for solid-fuel-burning appliances and equipment. It supersedes the previous editions, published in 2010, 2001, 1991, 1987, 1984, 1982, and... | |
| Preface This is the eighth edition of CSA B66, Design, material, and manufacturing requirements for prefabricated septic tanks and sewage holding tanks. It supersedes the previous editions, published in 2010... | |
| Preface This is the fifth edition of ANSI LC 1 • CSA 6.26, Fuel gas piping systems using corrugated stainless steel tubing. It supersedes the previous editions published in 2016,... | |
| Preface This is the fifth edition of ANSI Z21.21 / CSA 6.5, Automatic valves for gas appliances. It supersedes the previous editions published in 2012, 2005, 2000, and 1995. Scope... | |
| Preface This is the fifth edition of ANSI Z21.5.2 • CSA 7.2, Gas clothes dryers, volume II, type 2 clothes dryers. It supersedes the previous editions published in 2013, 2005,... | |
| Preface This is the fifth edition of ANSI Z21.58 • CSA 1.6, Outdoor cooking gas appliances. It supersedes the previous editions published in 2015, 2007, 2005 and 1995. Scope 1.1... | |
| Preface This is the fifth edition of ANSI Z83.4/CSA 3.7, Standard for Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application. It supersedes the previous editions... | |
| Preface This is the fifth edition of CSA B620, Highway tanks and TC portable tanks for the transportation of dangerous goods. It supersedes the previous edition published in 2009 and... | |
| Preface This is the fifth edition of CSA B621, Selection and use of highway tanks, TC portable tanks, and other large containers for the transportation of dangerous goods, Classes 3,... | |
| Preface This is the fifth edition of CSA B622, Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2. It... | |
| Preface This is the fifth edition of CSA C22.2 No. 106, HRC-Miscellaneous fuses, one of a series of Standards issued under Part II of the Canadian Electrical Code. It supersedes... | |
| Preface This is the fifth edition of CSA C22.2 No. 108, Liquid pumps, one of a series of Standards issued by CSA Group under Part II of the Canadian Electrical... | |
| Preface This is the fifth edition of CSA C22.2 No. 147, Motor-operated gardening appliances, one of a series of Standards issued by the Canadian Standards Association under Part II of... | |
| Preface This is the fifth edition of CSA C373, Energy performance and water consumption for household dishwashers. It supersedes the previous editions published in 2004, 1992, 1989, and 1980. Changes... | |
| Preface This is the first edition of ANSI HGV 2, Compressed hydrogen gas vehicle fuel containers. Scope 1.1 General This Standard contains requirements for the material, design, manufacture, marking, and... | |
| Preface This is the first edition of ANSI Z21.103, Unvented portable type gas camp heaters for indoor and outdoor use. Scope 1.1 This Standard applies to newly produced gas-fired unvented... | |
| Preface This is the first edition of ANSI/CAN/CSA-ISO 12617, Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector, which is an adoption without modification of the... | |
| Preface This is the first edition of ASME A112.19.3/CSA B45.4, Stainless steel plumbing fixtures. This Standard replaces (a) CAN/CSA-B45.4-02, Stainless Steel Plumbing Fixtures; and (b) ASME A112.19.3-2000, Stainless Steel Plumbing... | |
| Preface This is the first edition of ASME A112.19.7/CSA B45.10, Hydromassage bathtub systems. This Standard replaces ASME A112.19.7-2006, Hydromassage Bathtub Appliances, and CAN/CSA-B45.10-01 (R2006), Hydromassage bathtubs. Scope 1.1 This Standard... | |
| Preface This is the first edition of ASME A112.4.14/CSA B125.14, Manually operated shutoff valves for use in plumbing systems. This Standard replaces ASME A112.4.14-2004, Manually operated, quarter-turn shutoff valves for... | |
| Preface This is the first edition of ASME A112.4.2/CSA B45.16, Personal hygiene devices for water closets. This joint Standard was developed in response to an industry request for testing that... | |
| Preface This is the first edition of ASME A17.7/CSA B44.7, Performance-based safety code for elevators and escalators. This is a fully harmonized binational Code. Scope 1.1.1 Equipment Covered by this... | |
| Preface This is the first edition of ASME A17.8/CSA B44.8, Standard for wind turbine tower elevators. Originally, wind turbine tower elevators were covered in ASME A17.1-2013/CSA B44-13, Section 5.11, published... | |
| Preface This is the first edition of ASSE 1002/ASME A112.1002/CSA B125.12, Anti-siphon fill valves for water closet tanks. It supersedes the previous edition of ASSE 1002, published in 2008, and... | |
| Preface This is the first edition of ASSE 1037/ASME A112.1037/CSA B125.37, Performance requirements for pressurized flushing devices for plumbing fixtures. It supersedes the previous edition of ASSE 1037, published in... | |
| Preface This is the first edition of ASSE 1070/ASME A112.1070/CSA B125.70, Performance requirements for water temperature limiting devices. It (a) supersedes ASSE 1070:2004, Performance requirements for water temperature limiting devices; | |
| Preface This is the first edition of CSA A123.22, Self-adhering polymer modified bituminous sheet materials used as steep roofing underlayment for ice dam protection, which is an adoption, with Canadian... | |
| Preface This is the first edition of CSA A123.23, Product specification for polymer-modified bitumen sheet, prefabricated and reinforced. This Standard is intended to provide minimum requirements for prefabricated and reinforced... | |
| Preface This is the first edition of CSA A344, User guide for steel storage racks. It replaces CSA A344.1 published under the same title in 2005. Following the withdrawal of... | |
| Preface This is the first edition of CSA B137.19, Black crosslinked polyethylene (PEX) piping systems for gas services. This Standard is to be used with CSA B137.0. This Standard will... | |
| Preface This is the first edition of CSA B354.12, Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs). With respect to design and manufacturing criteria, this... | |
| Preface This is the first edition of CSA B354.13/B354.14, Safe use and best practices for mast climbing transport platforms (MCTPs)/Training for mast climbing transport platforms (MCTPs). With respect to design... | |
| Preface This is the first edition of CSA B354.9, Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs). With respect to design and manufacturing criteria, this... | |
| Preface This is the first edition of CSA B626, Portable tank Specification TC 44. It is the intent of the CSA Technical Committee to further develop this Standard in co-operation... | |
| Preface This is the first edition of CSA B65, Installation code for decentralized wastewater systems. Scope 1.1 1.1.1 This Code covers decentralized wastewater systems that use soil absorption systems for... | |
| Preface This is the first edition of CSA B701, Carer-inclusive and accommodating organizations. CSA Group would like to thank The Canadian Institute for Health Research and McMaster University for their... | |
| Preface This is the first edition of CSA B701HB, Helping worker-carers in your organization. This Handbook has been developed to support the implementation of CSA B701, Carer-inclusive and accommodating organizations. | |
| Preface This is the first edition of CSA C22.2 No. 0.22, Evaluation methods for arc resistance ratings of enclosed electrical equipment, one of a series of Standards issued by the... | |
| Preface This is the fourteenth edition of CSA B149.1, Natural gas and propane installation code. It supersedes the previous editions, published in 2005 and 2000 by the Canadian Standards Association... | |
| Preface This is the fourth edition of ANSI Z21.24/CSA 6.10, Connectors for gas appliances. It supersedes the previous editions published in 2006, 2001, and 1997. Scope 1.1 This Standard applies... | |
| Preface This is the fourth edition of ANSI Z21.41 / CSA 6.9, Standard for Quick disconnect devices for use with gas fuel appliances. It supersedes the previous editions published in... | |
| Preface This is the fourth edition of ANSI Z21.60/CSA 2.26, Decorative gas appliances for installation in solid- fuel burning fireplaces. It supersedes the previous editions published in 2012, 2003, and... | |
| Preface This is the fourth edition of ANSI Z21.69 / CSA 6.16, Connectors for moveable gas appliances. It supersedes the previous editions published in 2009, 2002, and 1997. Scope 1.1... | |
| Preface This is the fourth edition of ANSI Z21.74 Standard for Portable refrigerators. It supersedes the previous editions published in 2014, 1992, and 1983. This Standard was prepared by the... | |
| Preface This is the fourth edition of ANSI Z21.84, Manually lighted, natural gas, decorative gas appliances for installation in solid-fuel burning appliances. It supersedes the previous editions published in 2012,... | |
| Preface This is the fourth edition of ANSI Z83.11 • CSA 1.8, Gas food service equipment. It supersedes the previous editions published in 2006, 2002, and 1996. Scope 1.1 This... | |
| Preface This is the fourth edition of CSA A283, Qualification code for concrete testing laboratories. It supersedes the previous editions published in 2000, 1980, and 1974. This Standard specifies requirements... | |
| Preface This is the fourth edition of CSA B149.3, Code for the field approval of fuel-related components on appliances and equipment. It supersedes the previous editions, published in 2005 and... | |
| Preface This is the fourth edition of CSA B149.5, Installation code for propane fuel systems and tanks on highway vehicles. It supersedes the previous editions, published in 2005 and 2000... | |
| Preface This is the fourth edition of CSA B167, Overhead cranes, gantry cranes, monorails, hoists, and jib cranes. This edition supersedes the following editions: the third edition, published under the... | |
| Preface This is the fourth edition of CSA B214, Installation code for hydronic heating systems. It supersedes the previous editions, published in 2012, 2007, and 2001. The main changes from... | |
| Preface This is the fourth edition of CSA B366.1, Solid-fuel-fired central heating appliances. It supersedes the previous editions, published in 1991, 1987, and 1981. Scope 1.1 This Standard applies to... | |
| Preface This is the fourth edition of CSA B620, Highway tanks and TC portable tanks for the transportation of dangerous goods. It supersedes the previous editions published in 2003, 1998,... | |
| Preface This is the fourth edition of CSA B621, Selection and use of highway tanks, TC portable tanks, and other large containers for the tr ansportation of dangerous goods, Classes... | |
| Preface This is the fourth edition of CSA B622, Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2. It... | |
| Preface This is the fourth edition of CSA C22.2 No. 0.15, Adhesive labels. It supersedes the previous editions published in 2001, 1995, and 1990. This Standard is one of a... | |
| Preface This is the fourth edition of CSA C22.2 No. 0.4, Bonding of electrical equipment, one of a series of Standards issued by CSA Group under Part II of the... | |
| Preface This is the fourth edition of CSA C22.2 No. 107.1, Power conversion equipment, one of a series of Standards issued by CSA Group under Part II of the Canadian... | |
| Preface This is the fourth edition of CSA C22.2 No. 128, Vending machines. It is one of a series of Standards issued by CSA Group under Part II of the... | |
| Preface This is the fourth edition of CSA C22.2 No. 129, Neutral-supported cables, one of a series of Standards issued by the Canadian Standards Association under the Canadian Electrical Code,... | |
| Preface This is the fourth edition of CSA C22.2 No. 130, Requirements for electrical resistance trace heating and heating device sets. It supersedes the previous edition published in 2003 under... | |
| Preface This is the fourth edition of CSA C22.2 No. 150, Microwave ovens, one of a series of Standards issued by CSA Group under Part II of the Canadian Electrical... | |
| Preface This is the fourth edition of the Packaged terminal air-conditioners and heat pumps, jointly published by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI 310/380) and CSA Group (CSA C744). | |
| Preface This is the harmonized ANCE, CSA Group, and UL Standard for Ground-Fault Circuit-Interrupters . It is the third edition of NMX-J-520-ANCE, the second edition of CSA C22.2 No. 144.1,... | |
| Preface This is the harmonized CSA and UL Standard for Humidifiers. It is the fourth edition of CSA C22.2 No. 104, superseding editions published in 2001, 1993, and 1983, and... | |
| Preface This is the harmonized CSA Group and NEMA standard for Metal Cable Tray Systems. It is the fourth edition of CSA C22.2 No. 126.1, superseding the previous editions published... | |
| Preface This is the harmonized CSA Group and UL standard for Electrical Quick-Connect Terminals. It is the Third edition of CSA-C22.2 No. 153 and the Ninth edition of UL 310. | |
| Preface This is the harmonized CSA Group and UL standard for General Requirements for Battery-Powered Appliances. It is the first edition of CSA C22.2 No. 0.23, and the second edition... | |
| Preface This is the harmonized CSA Group and UL standard for particular requirements for Automatic Electrical Burner Control Systems. It is the first edition ANSI Z21.20 - CAN/CSA-C22.2 No. 60730-2-5... | |
| Preface This is the harmonized CSA Group and UL Standard for Uninterruptible Power Systems (UPS). It is the third edition of CSA C22.2 No. 107.3-14 and the fifth edition of... | |
| Preface This is the harmonized CSA Group, and UL standard for Transfer Switch Equipment - Over 1000 Volts. It is the First edition of CSA C22.2 No. 178.3, and the... | |
| Preface This is the ninth edition of CSA C22.2 No. 127, Equipment and lead wires. It is one of a series of Standards issued by CSA Group under Part II... | |
| Preface This is the second edition of A440S1, Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American Fenestration Stand ard/Specification for windows, doors, and skylights. It supersedes the first edition,... | |
| Preface This is the second edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American fenestration Standard/Specificati on for windows, doors, and skylights. It supersedes the previous edition, published in 2005 under... | |
| Preface This is the second edition of ANSI Z21.101 • CSA 8.5, Gas hose connectors for portable and moveable gas appliances. It supersedes the previous edition published in 2012. Scope... | |
| Preface This is the second edition of ANSI Z21.11.3, Gas-fired room heaters, volume III, propane-fired emergency use heater systems. It supersedes the previous edition published in 2013. Scope 1.1 This... | |
| Preface This is the second edition of ANSI Z21.66 / CSA 6.14, Automatic damper devices for use with gas-fired appliances. It supersedes the previous editions published in 1996. Scope 1.1... | |
| Preface This is the second edition of ANSI Z21.90 • CSA 6.24, Standard for Gas Convenience Outlets and Optional Enclosures. It supersedes the previous edition published in 2001. Scope 1.1... | |
| Preface This is the second edition of ANSI Z21.93 / CSA 6.30, Excess flow valves for natural gas and propane gas with pressures up to 5 psig. It supersedes the... | |
| Preface This is the second edition of ANSI Z83.26 / CSA 2.37, Gas-fired outdoor infrared patio heaters. It supersedes the previous edition published in 2007. Scope 1.1 This Standard applies... | |
| Preface This is the second edition of ANSI/CSA NGV 5.1, Residential fueling appliances. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial... | |
| Preface This is the second edition of ASME A112.18.6/CSA B125.6, Flexible water connectors. It supersedes the previous edition published in 2009. The following changes appear in this edition: a) updated... | |
| Preface This is the second edition of ASME A112.19.3/CSA B45.4, Stainless steel plumbing fixtures. It supersedes the previous edition published in 2008. Scope 1.1 This Standard covers plumbing fixtures made... | |
| Preface This is the second edition of ASME A112.19.5/CSA B45.15, Flush valves and spuds for water closets, urinals, and tanks. It supersedes the previous edition published in 2011. This edition... | |
| Preface This is the second edition of ASSE 1016/ASME A112.1016/CSA B125.16, Performance requirements for automatic compensating valves for individual showers and tub/shower combinations. It supersedes the previous edition published in... | |
| Preface This is the second edition of CSA A123.17, Asphalt glass felt used in roofing and waterproofing, which is an adoption, with Canadian deviations, of ASTM (American Society for Testing... | |
| Preface This is the second edition of CSA B140.10, Oil-fired warm-air heating appliances for mobile housing and recreational vehicles. It supersedes the previous edition published in 1974. It is one... | |
| Preface This is the second edition of CSA B140.7, Oil-burning equipment: Steam and hot-water boilers. This edition combines and replaces CSA B140.7.1-1976, Oil-Fired Steam and Hot-Water Boilers for Residential Use,... | |
| Preface This is the second edition of CSA B140.9.2, Portable, pressurized-type, liquid-petroleum-fue led camp stoves. It supersedes the previous edition, published in 1975. It is the second in a series... | |
| Preface This is the second edition of CSA B140.9.4, Portable, pressurized-type, liquid-petroleum-fue lled lamps and lanterns. It supersedes the previous edition, published in 1979. It is the third in a... | |
| Preface This is the second edition of CSA B341, UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods. It supersedes the previous edition published in 2009. | |
| Preface This is the second edition of CSA B342, Selection and use of UN pressure receptacles, multiple-element gas containers, and other pressure receptacles for the transport of dangerous goods, Class... | |
| Preface This is the second edition of CSA B44.2, Maintenance requirements and intervals for elevators, dumbwaiters, escalators, and moving walks. It supersedes the previous edition, published in 2007. This Standard... | |
| Preface This is the second edition of CSA B55.1, Test method for measuring efficiency and pressure loss of drain water heat recovery units. It supersedes the previous edition published in... | |
| Preface This is the second edition of CSA B55.2, Drain water heat recovery units. It supersedes the previous edition published in 2012. This Standard specifies health and safety requirements for... | |
| Preface This is the second edition of CSA B651.1, Accessible design for automated banking machines. It supersedes the first edition published in 2001 under the title Barrier-Free Design for Automated... | |
| Preface This is the second edition of CSA C22.2 No. 0.2, Insulation coordination, one of a series of Standards issued by CSA Group under Part II of the Canadian Electrical... | |
| Preface This is the second edition of CSA C22.2 No. 164, Electric sauna heating equipment, issued by CSA Group under the Canadian Electrical Code, Part II. It supersedes the previous... | |
| Preface This is the second edition of CSA C22.2 No. 165, Electric boilers, one of a series of Standards issued by CSA Group under Part II of the Canadian Electrical... | |
| Preface This is the second edition of CSA C22.2 No. 166, Stage and studio luminaires, one of a series of Standards issued by CSA Group under Part II of the... | |
| Preface This is the second edition of the CSA B184 Series of Standards, Polymeric subsurface stormwater management structures. It supersedes the first edition, published in 2011. This Series consists of... | |
| Preface This is the second edition of Z21.19/CSA 1.4, Refrigerators using gas fuel. It supersedes the previous edition published in 2002. Scope 1.1 This Standard covers gas-fired refrigerators having refrigerated... | |
| Preface This is the seventh edition of ANSI Z21.10.1 / CSA 4.1, Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less. | |
| Preface This is the seventh edition of ANSI Z21.47 / CSA 2.3, Gas-fired central furnaces. It supersedes the previous editions published in 2012, 2006, 2003, 2001, 1998, and 1993. Scope... | |
| Preface This is the seventh edition of ANSI Z21.5.1 • CSA 7.1, Gas clothes dryers, volume I, type 1 clothes dryers. It supersedes the previous editions published in 2016, 2015,... | |
| Preface This is the seventh edition of CSA C22.2 No. 0.3, Test Methods for electrical wires and cables, one of a series of Standards issued by the Canadian Standards Association... | |
| Preface This is the Sixth edition of ANSI Z21.13 / CSA 4.9, Gas-fired low pressure steam and hot water boilers. It supersedes the previous editions published in 2014, 2013, 2010,... | |
| Preface This is the Sixth edition of ANSI Z21.56 • CSA 4.7, Gas-fired pool heaters. It supersedes the previous editions published in 2014, 2013, 2004, 2001, and 1998. Scope 1.1... | |
| Preface This is the sixth edition of ANSI Z21.86/CSA 2.32, Vented Gas-Fired Space Heating Appliances. It supersedes the previous editions published in 2008, 2004, 2000, and 1998. Scope 1.1 This... | |
| Preface This is the sixth edition of ANSI Z83.8 / CSA 2.6, Gas unit heaters, gas packaged heaters, gas utility heaters, and gas-fired duct furnaces. It supersedes the previous editions... | |
| Preface This is the sixth edition of CSA A23.3, Design of concrete structures. It supersedes the previous editions published in 2004, 1994, 1984, 1977 (metric), and 1973 (imperial), and 1959. | |
| Preface This is the sixth edition of CSA A23.4, Precast concrete - Materials and construction. It supersedes the previous editions, published in 2009, 2005, 2000, 1994, and 1978. This Standard... | |
| Preface This is the sixth edition of CSA A257 Series, Standards for concrete pipe and manhole sections. It supersedes the previous editions published in 2009, 2003, 1992, 1982, and 1974. | |
| Preface This is the sixth edition of CSA B340, Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2. It supersedes the... | |
| Preface This is the sixth edition of CSA B45.6, Nonrecirculating toilets, vacuum toilets, and waste-holding tanks for use in recreational vehicles. It supersedes the previous editions, published in 2002, 1999,... | |
| Preface This is the sixth edition of CSA B45.7, Self-contained, recirculating, chemically controlled toilets for use in recreational vehicles. It supersedes the previous editions, published in 2002, 1999, 1994, 1988,... | |
| Preface This is the sixth edition of CSA B602, Mechanical couplings for drain, waste, and vent pipe and sewer pipe. It supersedes the previous editions published in 2010, 2005, 1999,... | |
| Preface This is the sixth edition of CSA C22.2 No. 123, Metal sheathed cables. It is part of a series of Standards issued by the Canadian Standards Association under Part... | |
| Preface This is the tenth edition of CSA B149.2, Propane storage and handling code. It supersedes the previous editions, published in 2005 and 2000 by the Canadian Standards Association (CSA)... | |
| Preface This is the third edition of A440S1, Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440-11, NAFS - North American Fenestration Standard/Specificati on for windows, doors, and skylights. It supersedes the second edition,... | |
| Preface This is the third edition of AAMA/WDMA/CSA 101/I.S.2/A440, NAFS - North American Fenestration Standard/Specificati on for windows, doors, and skylights. It supersedes the previous editions, published in 2008 under... | |
| Preface This is the third edition of ANSI Z21.54/CSA 8.4, Gas hose connectors for portable outdoor gas-fired appliances. It supersedes the previous edition published in 1996 and 2002. Scope 1.1... | |
| Preface This is the third edition of ANSI Z21.63/CSA 11.3, Portable camp heaters. It supersedes the previous editions published in 2011 and 2000. Scope 1.1 This Standard applies to unvented... | |
| Preface This is the third edition of ANSI Z21.72 • CSA 11.2, Portable type gas camp stoves. It supersedes the previous editions published in 2000 and 2011. Scope 1.1 This... | |
| Preface This is the third edition of ANSI Z21.73/CSA 11.1, Portable type gas camp lights. It supersedes the previous editions published in 2000 and 2011. Scope 1.1 This Standard applies... | |
| Preface This is the third edition of ANSI Z21.75 • CSA 6.27, Connectors for outdoor gas appliances and manufactured homes. It supersedes the previous editions published in 2007 and 2001. | |
| Preface This is the third edition of ANSI Z21.91, Ventless firebox enclosures for gas-fired unvented decorative room heaters. It supersedes the previous editions published in 2007 and 2001. Scope 1.1... | |
| Preface This is the third edition of ANSI Z21.97 • CSA 2.41, Outdoor decorative gas appliances. It supersedes the previous editions published in 2014 and 2012. Scope 1.1 This Standard... | |
| Preface This is the third edition of ANSI Z21.98 • CSA 4.10, Non-metallic dip tubes for use in water heaters. It supersedes the previous editions published in 2014 and 2012. | |
| Preface This is the third edition of ANSI Z83.19/CSA 2.35, Gas-fired high intensity infrared heaters. It supersedes the previous editions published in 2009 and 2001. Scope 1.1 This Standard applies... | |
| Preface This is the third edition of ANSI Z83.25 / CSA 3.19, Standard for Direct gas-fired process air heaters. It supersedes the previous edition published in 2015. Scope 1.1 This... | |
| Preface This is the third edition of ANSI Z83.7 • CSA 2.14, Gas-fired construction heaters. It supersedes the previous editions published in 2000 and 2011. Scope 1.1 This Standard applies... | |
| Preface This is the third edition of ASME A112.18.2/CSA B125.2, Plumbing waste fittings. It supersedes the previous edition, published in 2011. Together with ASME A112.18.1/CSA B125.1, Plumbing supply fittings, CSA... | |
| Preface This is the third edition of CSA B109, Natural gas for vehicles installation code. It supersedes the previous edition published in 2014 under the same title and the 2001... | |
| Preface This is the third edition of CSA B242, Groove- and shoulder-type mechanical pipe couplings. It supersedes the previous editions published in 1980 and 1971. It is written in SI... | |
| Preface This is the third edition of CSA B255, Mechanical flue-gas exhausters. It supersedes the previous editions published in 1981 and 1973. Scope 1.1 This Standard applies to mechanical flue-gas... | |
| Preface This is the third edition of CSA B335, Safety standard for lift trucks. It supersedes the previous editions- published in 2004 and 1994. This Standard specifies the key elements... | |
| Preface This is the third edition of CSA B352.0, Rollover protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery... | |
| Preface This is the third edition of CSA B415.1, Performance testing of solid-fuel-burning heating appliances. It supersedes the previous editions, published in 2000 under the same title, and published in... | |
| Preface This is the third edition of CSA C199, Three-phase network distribution transformers. It supersedes the previous editions published in 1982 and 1970 under the title Three-Phase Network Transformers. Scope... | |
| Preface This is the third edition of CSA C22.2 No. 0.5, Threaded conduit entries. It supersedes the previous editions published in 1982 and 1979. For general information on the Standards... | |
| Preface This is the third edition of CSA C22.2 No. 109, Commercial cooking appliances, issued by CSA Group under the Canadian Electrical Code, Part II. It supersedes the previous editions... | |
| Preface This is the third edition of CSA C22.2 No. 140.3, Refrigerant-containi ng components for use in electrical equipment. It is one of a series of Standards issued by CSA... | |
| Preface This is the third edition of CSA C22.2 No. 15, Electrically heated warming pads. It supersedes the previous editions published in 1991 and 1954. It is one of a... | |
| Preface This is the third edition of CSA C22.2 No. 158, one of a series of Standards issued by the Canadian Standards Association under Part II of the Canadian Electrical... | |
| Preface This is the third edition of CSA C22.2 No. 160, Voltage and polarity testers, one of a series of Standards issued by CSA Group under Part II of the... | |
| Preface This is the third edition of the CSA A123.5, Asphalt shingles made from glass felt and surfaced with mineral granules. It supersedes the combined edition of CSA A123.1/A123.5, published... | |
| Preface This is the thirteenth edition of CSA C22.2 No. 14, Industrial control equipment, one of a series of Standards issued by the Canadian Standards Association under Part II of... | |
| Preface This is the twenty-eighth edition of ANSI Z21.11.2, Gas-fired room heaters, volume II, unvented room heaters. It supersedes the previous editions published in 2013, 2011, 2007, 2000, 1996, 1992,... | |
| Preface This publication represents a basic standard for acceptable performance of pipe joint compounds and materials. It is the result of years of experience in the manufacture, testing, inspection and... | |
| Preface This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of a line pressure regulator. It is the result of years of experience... | |
| Preface This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of automatic gas shutoff devices for hot water supply systems. It is the... | |
| Preface This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of gas appliance pressure regulators. It is the result of years of experience... | |
| Preface This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of press-connect metallic fittings for use in fuel gas distribution systems. It is... | |
| Preface This publication represents a standard for safe operation, substantial and durable construction, and acceptable performance of recreational vehicle cooking gas appliances. It is the result of years of experience... | |
| Preface This Standard is being developed for agencies in North America to use for examination, testing and certification of compressed Natural Gas Vehicle (NGV) fuelling nozzles and receptacles only. As... | |
| Preface This Standard was reaffirmed in 2009 for likely the last time. Plans call for withdrawal of this standard soon. CSA will soon cease to certify to 142. All certifications... | |
| Preface This volume contains the seventh edition of CSA B64.10, Selection and installation of backflow preventers, and the fourth edition of CSA B64.10.1, Maintenance and field testing of backflow preventers. | |
| Pressure relief devices protect against equipment damage, loss of containment and ultimately fuel station shutdowns by prevention of overpressure in natural gas vehicle (NGV) fuel containers. ANSI/CSA PRD 1-2013 -... | |
| Product Highlight This product is offered as a FREE DOWNLOAD. Option 1 - Click the "Free Download" button below and get simple PDF access, to be stored locally, but with... | |
| Revision(s) to this standard are available. Preface This is the fifth edition of ANSI Z21.89 / CSA 1.18, Outdoor cooking specialty gas appliances. It supersedes the previous editions published in... | |
| SAFETY ALERT – Unauthorized Imitation CE Code, Part I, Raises Safety Concerns Overview For 90 years, the Canadian Electrical Code, Part I has been developed & updated to help better... | |
| Scope 1.1.1 This Standard applies to newly produced, gas-fired, heat activated, air conditioning and heat pumping appliances, hereinafter referred to as appliances, constructed entirely of new, unused parts and materials,... | |
| Scope 1.1 This Standard states the minimum requirements for nozzles which are designed for installation in oil burners of the pressure atomizing type. 1.2 This Standard includes requirements for construction,... | |
| Scope 1.1 General This Standard covers requirements for the manufacturing, inspection, testing, marking, requalification, reheat treatment, repair, and rebuilding of cylinders, spheres, and tubes (containers) for the transportation of dangerous... | |
| Scope 1.1 Objectives This Standard is for use by organizations that intend to provide people with disabilities with customer service that is equivalent to the quality of service provided to... | |
| Scope 1.1 This Standard applies to the mechanical features of new and remanufactured power-operated dispensing devices for petroleum-base liquids for use as fuel in internal combustion engines where such devices... | |
| Scope 1.1 This Standard covers portable fuel tanks with a rated capacity of not more than 30 L (7 Canadian gallons), designed to be connected to gasoline-fuelled engines aboard boats... | |
| Scope 1.1 Applicability This Standard applies to the installation of a conversion burner with an input of 400,000 Btu per hour (117 228 W) or less and design certified as... | |
| Scope 1.1.1 This Standard applies to ac and dc type portable fuel cell power systems, with a rated output voltage not exceeding 600 V, for commercial, industrial, and residential indoor... | |
| Scope 1.1.1 This Standard applies to manually-operated gas valves (see Part IV, Definitions), hereinafter referred to as valves, not exceeding 4 in (102 mm) pipe size, and pilot shut-off devices... | |
| Scope 1.1.1 This Standard applies to newly produced automatic gas ignition systems (see Part IV, Definitions) and components constructed entirely of new, unused parts and materials. An automatic gas ignition... | |
| Scope 1.1.1 This Standard applies to newly produced domestic gas conversion burners constructed entirely of new, unused parts and materials and having input ratings at normal inlet test pressure of... | |
| Scope 1.1.1 This Standard applies to newly produced gas appliance sediment traps hereinafter referred to as traps (see Part IV, Definitions), constructed entirely of new, unused parts and materials. Compliance... | |
| Scope 1.1.1 This Standard applies to newly produced manually-operated piezo-electric spark gas ignition systems (see Part IV, Definitions), hereinafter referred to as piezo ignition systems, and components constructed entirely of... | |
| Scope 1.1.1 This Standard applies to newly produced pilot gas filters, hereinafter referred to as filters (See Part IV, Definitions), constructed entirely of new, unused parts and materials. Compliance of... | |
| Scope 1.1.1 This Standard applies to newly produced, gas-fired, work activated, air conditioning and heat pumping appliances, hereinafter referred to as appliances, constructed entirely of new, unused parts and materials,... | |
| Scope 1.1.1 This Standard applies to newly-produced direct gas-fired circulating heaters (see Part IV, Definitions) of 400,000 Btu (117 228 W) or less, hereinafter referred to as heaters, constructed entirely... | |
| Scope 1.1.1 This Standard applies to the construction and installation procedures for newly produced automatic intermittent pilot ignition systems (see Part II, Definitions), hereinafter referred to as "systems", constructed entirely... | |
| Scope 1.1.1 This Standard covers CGA 791 (Type I) and CGA 810 (Type II) cylinder connection devices, as defined in Part IV, Definitions, intended to connect the cylinder valve on... | |
| Scope 1.1.1 This Standard covers separately constructed draft hoods for installation on appliances required to be vented. A draft hood supplied as part of a listed appliance is certified as... | |
| Scope 1.1 This Specification applies to complete flue-connected oil burning stoves incorporating oil burners of the vapourizing-type. 1.2 The requirements given herein apply to circulating and radiant room heaters, ranges,... | |
| Scope 1.1 This Standard applies to cord connected and direct plug-in transformers for use indoors, designed to be used on a nominal 120-V branch circuit in nonhazardous locations in accordance... | |
| Scope 1.1 This Standard applies to cord-connected room air conditioners rated not more than 250 volts, single phase, with a rated capacity not over 36,000 Btu/hr, designed to be used... | |
| Scope 1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as motor-compressors) rated 7200 V or less, for use in air-conditioning and refrigerating equipment that comply with the... | |
| Scope 1.1 This Standard applies to household electric toys operating at nominal potentials of 120 volts or less, including extra low potential, and intended for use in ordinary (ie, non-hazardous)... | |
| Scope 1.1 This Standard applies to non-pressurized liquid fuelled catalytic appliances ranging in input capacities from 1,000 Btuh to 15,000 Btuh primarily used as portable space heating appliances. 1.2 Appliances... | |
| Scope 1.1 This Standard applies to oil burning assemblies comprising a vapourizing burner and such devices as may be required to control the supply of fuel to the burner. 1.2... | |
| Scope 1.1 This Standard applies to portable containers of up to and including 5 gallons (25 L) nominal capacity, made from metal or plastic and intended for the storage and... | |
| Scope 1.1 This Standard applies to portable industrial oil-fired heaters irrespective of the heating capacity, the type of burner or the motive power. 1.2 The requirements given herein apply to... | |
| Scope 1.1 This Standard applies to stationary electric duct heaters for comfort heating rated at 600 V or less and 1000 kW and less, designed to be installed and used... | |
| Scope 1.1 This Standard covers PVC duct and fittings that are used as a raceway for telecommunication cables. Such ducting may be encased in concrete or directly buried in the... | |
| Scope Details test and examination criteria for combination gas controls having a maximum operating gas pressure of ½ psi (3.45 kPa) with one or more of the following fuel gases:... | |
| Scope Details test and examination criteria for flammable vapor sensor systems and components for use in gas-burning appliances. This Standard applies to a flammable vapor sensor or system capable of... | |
| Scope Details test and examination criteria for pilot gas filters that have a maximum operating gas pressure rating of ½ psi. The temperature range shall be 32ºF to 125ºF (0ºC... | |
| Scope Details test criteria for manually-operated electric gas ignition systems and ignitions system components which are intended to form an integral part of a gas appliance. An ignition system shall... | |
| Scope Section A - Brooders 1.1 This Section applies to both portable and stationary electric brooders, for potentials of 250 volts and less, designed to be used in accordance with... | |
| Scope The ASME A17.1/CSA B44, Safety Code for Elevators and Escalators, and ASME A17.7/CSA B44.7, Performance- Based Safety Code for Elevators and Escalators, are the accepted guides for design, construction,... | |
| Scope This Guide has been written by Canadian experts on the diagnosis and treatment of concrete structures affected by alkali- aggregate reaction (AAR). The purpose of the Guide is to... | |
| Scope This Standard establishes methods of testing and rating gas-fired, heat pumps for space-conditioning performance. The procedures apply to factory-made, space-conditioning, unitary heat pumps which utilize gas as the primary... | |
| Successful commercialization of compressed hydrogen as a vehicle fuel relies heavily on the establishment and dissemination of applicable safety standards related to not only fueling stations, but also vehicle fuel... | |
| Targeting Canadian gas and propane industry workers, this standard reflects the latest advances in technology and corresponding safety requirements. It has been reviewed by regulatory authorities across Canada, and has... | |
| Technical Standard | |
| The 2015 edition of B149.2-15 - Propane storage & handling code reflects the latest advances in industry best practices and the most current safety requirements. B149.2-15 applies to the installation... | |
| The 2018 Québec Construction Code, Chapter V — Electricity is comprised of the 2015 Canadian Electrical Code, Part I (twenty-third edition) as adopted in the province of Québec and contains... | |
| The anticipated growth of HGV fueling stations and the safety concerns associated with it was the driving force behind CSA Group's development of ANSI/CSA HGV 4.6-2013 Manually Operated Valves for... | |
| The design and construction of electrical equipment for elevators and escalators presents complex requirements in the application of industrial control equipment and elevator equipment. With the need to have identical... | |
| The Quebec Electrical Code is comprised of the Canadian Electrical Code, Part I as adopted in the Province of Quebec. It includes Quebec provincial amendments. The Canadian Electrical Code, Part... | |
| The Technical Standards & Safety Authority (TSSA) has published Code Adoption Documents (CAD) for use in conjunction with the 2015 CSA B149 SERIES and serves as a collection of important... | |
| This eBook contains C22.1-18 Canadian Electrical Code Part I C22.1HB-18 Handbook (An explanation of the rules of the Canadian Electrical Code) Electrical quick reference guide Overview All Canadian Electrical Code... | |
| This is the first edition of C22.2 No. 0.19, Requirements for service entrance equipment. This Standard gives the general and specific minimum safety objectives that service entrance equipment must meet. | |
| This is the first edition of CSA B701, Carer-inclusive and accommodating organizations. CSA Group would like to thank The Canadian Institute for Health Research and McMaster University for their financial... | |
| This is the fourth edition of CSA B125.3, Plumbing fittings. It supersedes the previous editions, published in 2012, 2011, and 2005. Together with ASME A112.18.1/CSA B125.1, Plumbing supply fittings, ASME... | |
| This is the harmonized CSA Group and UL Standard for Electric Clothes Dryers. It is the eleventh edition of CSA C22.2 No. 112 and the fifth edition of UL 2158. | |
| This is the second edition of ANSI Z21.22-2015 / CSA 4.4-2015, Relief valves for hot water supply systems. Scope 1.1 This Standard applies to the following types of relief valves... | |
| This is the third edition of CSA B140.2.1, Atomizing-type oil burners. It supersedes the previous editions, published in 1990 and 1973 under the title Oil Burners; Atomizing-Type. Scope 1.1 This... | |
| This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of gas appliance thermostats. It is the result of years of experience in the... | |
| This publication represents a standard for safe operation, substantial & durable construction, and performance testing of fittings used with compressed hydrogen gas and hydrogen rich gas mixtures. Industry recognized there... | |
| Understanding and effectively applying the latest requirements of the 2018 Canadian Electrical Code, Part I is an important element in helping ensure safety in your construction projects and helps reduce... | |
| Update #1 to this standard is available. Preface This is the third edition of CSA C22.2 No. 101, Electrically heated bedding appliances for household use, one of a series of... | |
| View current B149 related products Overview The B149 Series provides important guidance on how to do your job safely -- from handling and storage of natural gas and propane, to... |
| Next >> |