CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ISO/IEC 13187:2011(E) lays out the general framework for theServer Management Command Line Protocol (SM CLP). This standard is intended toguide developers of implementations of the SM CLP and may also... | |
| ISO/IEC 14543-5-4:2010(E) specifies device validationmethods for information devices that implement ISO/IEC 14543-5-1. It defines anarchitecture framework for a device validation system used by test devices anddevices under test. Also, it... | |
| ISO/IEC 14776-151:2010(E) defines the rules for exchanging informationbetween SCSI devices using a serial interconnect. It defines the rules forexchanging information between ATA hosts and ATA devices using the same serialinterconnect. | |
| 1.1 Organization of the document ISO/IEC 15938-13:2015 is as follows. Clauses 2-3 specify the terms, abbreviations, symbols and conventions used in the document. Clause 4 specifies the binary representation syntax... | |
| A table is added at the end of annex B. | |
| A table is added at the end of annex F. | |
| A table is added at the end of annex H. | |
| ABSTRACT@font-face { font-family: SimSun;}@font-face { font-family: @SimSun;}@page Section1 {size: 21.0cm 842.0pt; margin: 51.05pt 2.0cm 70.9pt 2.0cm; mso-header-margin: 0cm; mso-footer-margin: 22.7pt; mso-paper-source: 0; }P.MsoNormal { FONT-SIZE: 11pt; MARGIN: 0cm 0cm 0pt; | |
| Addresses the application of security services in an Open Systems environment, where the term Open Systems is taken to include areas such as Database, Distributed Applications, Open Distributed Processing and... | |
| Adds a lot of new clauses and subclauses and replaces the wording of some clauses and subclauses of ISO/IEC 12087 3:1995. | |
| Adds a new second paragraph to subclause 8.2.1, amends annex C. | |
| Adds specifications answering to requirements for Counter Attributes from ITU-T SG 7. | |
| Adds specifications answering to requirements for DCE apects and some new attributes for LAPBDLE MOs and IVMOs. These new specifications came out of the comments to DIS 10742. They will... | |
| Adds the new subclause 3.7.4 and renumbers the rest of the clause. | |
| Amends subclauses 7.1.1, 7.1.2, 8.1.4, 8.1.5.6, 8.1.6, 8.2.1.1, 8.2.7.2, 8.3.11, 9.2.5, 9.4.2.4, 10.4, annexes C and E. | |
| Applies to environments including a CSDN and an ISDN terminal adaptor complying with recommendation X.30 which provides an X.21 access. Provision is achieved by specifying the mapping of the CONS... | |
| Applies to environments including telephone network leased circuit connection between two DTEs; telephone network switched connection between two DTEs; DTE access to a PSDN via a telephone network leased circuit... | |
| Concerns with the manipulation, processing, and interchange of all types of digital images. Defines a generic, unifying imaging architecture. Also defines those specializations or delineations of the generic imaging architecture... | |
| Consists of five parts; part 1 specifies references, definitions, notation and basic structures that apply to the other four parts. | |
| Contains a great number of amendments and additions; Information Resource Dictionary System (IRDS) services interface; ADA language binding. | |
| Contains amendments regarding the subclause 8.1.2.3 and replaces table 1 in 8.1.2.5. | |
| Contains minor enhancement for additional error. | |
| Contains minor enhancements. | |
| Contains minor technical amendments and additions only. | |
| Contains requirements necessary for the synchronization of PISNs. Establishes technical criteria necessary in the design of a synchronization plan for a PISN. | |
| Contains some amendments and adds the annex C - C language binding. | |
| Contains tables, which document the mandatory and optional management information specific to the Alarm Reporting Function. This amendment will be used by Profile specifiers, for example, those developing International Standardized... | |
| Contains tables, which document the mandatory and optional management information specific to the Event Reporting Function. This amendment will be used by Profile specifiers, for example, those developing International Standardized... | |
| Contains tables, which document the mandatory and optional management information specific to the Security Alarm Reporting Function. This amendment will be used by Profile specifiers, for example, those developing International... | |
| Deals with the service specification functional model and information flows applicable to Private Integrated Services Network (PISN). Uses the ISDN concepts as developed by ITU T (formerly CCITT) and is... | |
| Defines a bit-preserving (lossless) compression method for coding image bit-planes and is particularly suitable for bi-level (two-tone, including black-white) images. Specifies requirements and test methods and gives datastream examples. | |
| Defines a language for the specification of electronic documents, comprised of black and white, gray scale, or full color text, images, and geometric graphics, in a form suitable for presentation... | |
| Defines a model for security in the upper layers of OSI that provides a basis for the development of application-independ ent services and protocols, in particular it specifies the security... | |
| Defines a notation, Extended BNF, for specifying the syntax of a linear sequence of symbols. It defines both the logical structure of the notation and its graphical representation. | |
| Defines a series of related 130 mm optical disk cartridges (ODCs). Gives the conditions for conformance testing and the Reference Drive, mechanical, physical and dimensional characteristics, the format of the... | |
| Defines a set of concepts and their inter-relationships which should be applicable to the complete range of future computer graphics standard. May be applied to verify and refine requirements for... | |
| Defines a set of generic facilities to assist in the provision of security services in OSI applications. Defines the protecting transfer syntax specification. Identical to ITU-T Rec. X.833. | |
| Defines a set of generic facilities to assist in the provision of security services in OSI applications. | |
| Defines a Systems Management Function that may be used by an application process in a centralised or decentralised management environment to interact for the purpose of systems management, as defined... | |
| Defines a systems management function that may be used by an application process in a centralized or decentralized management environment to interact for the purpose of systems management and a... | |
| Defines a systems management function which may be used by an application process in a centralized or decentralized management environment to interact for the purpose of systems management. Establishes user... | |
| Defines a systems management function which may be used by an application process to interact for the purpose of systems management. Among others, establishes user requirements for attributes, establishes a... | |
| Defines a systems management function which may be used by an application process to interact for the purpose of systems management. Among others, establishes user requirements for the state management... | |
| Defines diagrams and symbols for representing software functions and transitions and in improving human communication. Covers development, communication and review of software requirement analysis and design. Effective in interactive software,... | |
| Defines the address-space maps, the bus transaction sets, and the node's CSRs. Includes the format and content of the configuration ROM on the node providing the parameters necessary to autoconfigure... | |
| Defines the control functions and their coded representations. Applies only to text made up of characters. Does not define any control functions required for controlling the process of communication. Annexes... | |
| Defines the HIPPI-LE Protocol Data Unit (PDU) format and interface for transporting ISO/IEC 8802-2 Logical Link Control PDUs over HIPPI. | |
| Defines the information model of managed objects and their attributes that corresponds to the information aspects of the systems management model introduced in the systems management overview CCITT Rec. X.701... | |
| Defines the managed object classes, attribute types, name bindings, packages, specific attributes, action types, parameter types and notification types documented in accordance with CCITT Rev. X.722 / ISO/IEC 10165-4 and... | |
| Defines the operation, functions, and attributes of the IEEE 1296 bus standard. Defines a high-performance 32-bit synchronous bus standard. Intended for general purpose applications to optimize block transfers, including protocol... | |
| Defines the Summarization Function which consists of generic definitions and services and is positioned in the application layer of the OSI reference model. Also specifies methods for reporting statistics based... | |
| Defines the transport layer security protocol. Does not specify the management functions and protocols needed to support this security protocol. Defines a protocol which may be used for Security Association... | |
| Deletes text in subclause 10.7.4.3. | |
| Deletes text in subclause 8.1.2.12. | |
| Deletes the last sentence of subclause 9.2.5, beginning "For a DFR-Root-Group ...". | |
| Describes an Access Control Security Model and the management information necessary for creating and administering access control associated with OSI System Managements. Security policy adoped for any instance of use... | |
| Describes the concepts and model of ROS. It uses ASN.1 to specify information object classes corresponding to the fundamental concepts of ROS, such as operation and error. This in turn... | |
| Describes the physical and magnetic characteristics of a magnetic tape cartridge, using magnetic tape 12,65 mm wide, so as to provide physical interchangeability of such cartridges. Specifies the quality of... | |
| Designed to promote the applicability and portability of Prolog text and data among a variety of data processing systems. Specifies: the representation of Prolog text; the syntax and constraints of... | |
| Does not change or supersede any of the requirements in ISO/IEC 13818-1. All transport streams, whether or not they are delivered in accordance with the RTI shall comply with ISO/IEC... | |
| Establishes definitions of terms and conventions for use by Recommendations International Standards defining OSI-services within the scope of the Basic Reference Model of Open Systems Interconnection. Specifies the application of... | |
| Establishes the syntax of programs written using individual character input, or modules, or both; the semantic rules for interpreting the meaning of a BASIC program that uses individual character input,... | |
| Establishes user requirements for the alarm reporting function and a model that relates the service and generic definitions provided by this function to user requirements, defines the service provided by... | |
| Establishes user requirements for the log control function; establishes models that relate the services provided by the function to user requirements; defines the services provided by the function; specifies the... | |
| Establishes user requirements for the service definition needed to support the security alarm reporting function, defines the service provided by the security alarm reporting function, specifies the protocol that is... | |
| Establishes user requirements for the service definition needed to support the security audit trail reporting function, defines the service provided by the security audit trail reporting function, specifies the protocol... | |
| Facilitates the specification and development of distributed applications based on extending the well-known remote procedure call paradigm to operate between application processes on two separate real open systems in the... | |
| FC-AL-2 defines a method for the operation of a Fibre Channel arbitrated loop. This amendment corrects some inconsistencies found since approval of FC-AL-2 (ISO/IEC 14165-122:2005). | |
| Fibre Channel provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance Parallel... | |
| Forms one of a set of International Standards produced to facilitate the interconnection of information processing systems. It is related to other International Standards in the set as defined by... | |
| Icons are used on Information and Communications Technology (ICT) products to facilitate interaction with their users. Icons can provide a language-independent means of communicating information to the user. ISO/IEC 11581... | |
| Includes tables, which document the mandatory and optional management information specific to the Attributes for Representing Relationships Recommendation. Will be used by Profile specifiers, for example those developing International Standardized... | |
| Includes tables, which document the mandatory and optional management information specific to the Log Control Management Function. Will be used by Profile specifiers, for example those developing International Standardized Profiles... | |
| Includes tables, which document the mandatory and optional management information specific to the Object Management Function. Will be used by Profile specifiers, for example those developing International Standardized Profiles (ISPs),... | |
| Includes tables, which document the mandatory and optional management information specific to the State Management Function. Will be used by Profile specifiers, for example those developing International Standardized Profiles (ISPs),... | |
| Interoperability involves the ability to use assistive technology (AT) to add to or augment existing components of information technology (IT) systems. Interoperability between AT and IT is best facilitated via... | |
| Is one of a series of standards defining services and signalling protocolls applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to... | |
| Is one of International Standards defining services and signalling protocols applicable to Private Integrated Services Networks. The series uses the ISDN concepts as developed by ITU-T and conforms to the... | |
| Is one of International Standards designed to facilitate the global interconnection of applications across both private telecommunications networks and public ISDNs. This is achieved by ensuring compatibility and interworking of... | |
| ISO/EC 14776-121:2010(E) specifies the performance requirements of theinterconnect and expands the coverage to the complete a ISO/EC 14776-121:2010(E) specifies the performancerequireme nts of the interconnect and expands the coverage to... | |
| ISO/IEC 10179:1996/Amd.1:200 3 specifies additional flow object classes for online display, and additional formatting areas for inline-display area and inter-line attachment area. For clarification of some existing definitions in ISO/IEC... | |
| ISO/IEC 10179:1996/Amd.1:200 3 specifies additional flow object classes for online display, and additional formatting areas for inline-display area and inter-line attachment area. For clarification of some existing definitions in ISO/IEC... | |
| ISO/IEC 10192-3:2017(E) this part of ISO/IEC 10192 specifies a Universal Communication Module (UCM) that transfers energy management data via a home network between an end device and an energy management... | |
| ISO/IEC 10373 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which... | |
| ISO/IEC 10373-1:2006 specifies the non-technology-speci fic test methods required to establish conformance of identification cards to the base (requirements) standards, for which the fundamental properties are defined in ISO/IEC 7810. | |
| ISO/IEC 10373-2:2015 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, for... | |
| ISO/IEC 10373-3:2018 This document defines test methods for characteristics of integrated circuit cards with contacts and related interface devices according to the definition given in ISO/IEC 7816-3. Each test method... | |
| ISO/IEC 10373-5:2014 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which... | |
| ISO/IEC 10373-6:2016 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which... | |
| ISO/IEC 10373-8:2011 describes a Test Methodology and a list of Test Scenarios to evaluate the compliance of a card with ISO/IEC 7816-12. Specifically, ISO/IEC 10373-8:2011: addresses USB 2.0 physical layer... | |
| ISO/IEC 10373-9:2011 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. It is specific to optical memory cards that use the holographic recording... | |
| ISO/IEC 10746 provides a coordinating framework for the standardization of open distributed processing (ODP). This supports distribution, interworking, portability, and platform and technology independence. It establishes an enterprise architecture framework... | |
| ISO/IEC 10779:2008 specifies accessibility guidelines to be considered when planning, developing and designing electrophotographic copying machines, page printers and multi-function devices. These guidelines are intended to improve accessibility required when... | |
| ISO/IEC 10918-5:2013 specifies the JPEG File Interchange Format (JFIF). | |
| ISO/IEC 10918-6:2013 specifies a subset of features and application tools for the interchange of images encoded according to the JPEG image coding standard (Rec. ITU-T T.81 ISO/IEC 10918-1) for printing. | |
| ISO/IEC 10967-1:2012 specifies properties of many of the integer and floating point datatypes available in a variety of programming languages in common use for mathematical and numerical applications. Its goal... | |
| ISO/IEC 10967-3:2005 is based on ISO/IEC 10967-2 and ISO/IEC 10967-1, as well as IEC 60559. ISO/IEC 10967-3:2005 specifies the properties of complex and imaginary integer datatypes and floating point datatypes,... | |
| ISO/IEC 10995:2011 specifies an accelerated aging test method for estimating the life expectancy for the retrievability of information stored on recordable or rewritable optical disks. This test includes details on... | |
| ISO/IEC 11160 is intended to facilitate users in selecting a printer which meets their requirements. ISO/IEC 11160 specifies the minimum information to be included in the specification sheets of printers... | |
| ISO/IEC 11179-1:2015 provides the means for understanding and associating the individual parts of ISO/IEC 11179 and is the foundation for a conceptual understanding of metadata and metadata registries. ISO/IEC 11179-1:2015... | |
| ISO/IEC 11179-2:2005 restates and elaborates on the procedures and techniques of ISO/IEC 11179-3:2003 for registering classification schemes and classifying administered items in a metadata registry (MDR). All types of administered... | |
| ISO/IEC 11179-3:2013 specifies the structure of a metadata registry in the form of a conceptual data model. While the model diagrams are presented in UML notation, ISO/IEC 11179-3:2013 does not... | |
| ISO/IEC 11179-4:2004 specifies requirements and recommendations for constructing definitions for data and metadata. Only semantic aspects of definitions are addressed; specifications for formatting the definitions are deemed unnecessary for the... | |
| ISO/IEC 11179-5:2015 provides instruction for naming of the following items, as defined in ISO/IEC 11179‑3: concept, data element concept, conceptual domain, data element, and value domain. ISO/IEC 11179-5:2015 describes naming... | |
| ISO/IEC 11179-6:2015 defines the type of information to be specified, the conditions to be met, and the procedure(s) to be followed for each metadata item to be registered in a... | |
| ISO/IEC 11404:2007 specifies the nomenclature and shared semantics for a collection of datatypes commonly occurring in programming languages and software interfaces, referred to as the General-Purpose Datatypes (GPD). It specifies... | |
| ISO/IEC 11581 defines graphical symbols for use on a screen, which users can manipulate and interact with. They are part of a graphical interface that can facilitate the user's ability... | |
| ISO/IEC 11581-10:2010 recognizes that icons are more than just symbols used on computer screens. Icons are interaction objects used by computer interfaces to accomplish various purposes. Icons can be rendered... | |
| ISO/IEC 11582:2002 defines the signalling protocol for the control of Supplementary Services and Additional Network Features (ANFs) at the Q reference point. The protocol is part of Private Signalling System... | |
| ISO/IEC 11693-2:2009 defines the conditions under which optical memory can co-exist with other machine readable card technologies. | |
| ISO/IEC 11693-3:2015 defines the authentication techniques. | |
| ISO/IEC 11694-1:2012 defines the physical characteristics of optical memory cards using the linear recording method. | |
| ISO/IEC 11694-2:2012 defines the dimensions and location of the accessible optical area of optical memory cards with ID-1 dimensions using the linear recording method. | |
| ISO/IEC 11694-3:2015 specifies the optical properties and characteristics of optical memory cards using the linear recording method. | |
| ISO/IEC 11694-4:2008 defines the logical data structures for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method. | |
| ISO/IEC 11694-5:2014 defines the data format for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method. | |
| ISO/IEC 11694-6:2014 describes the use of biometric data on optical memory cards using the logical data structure described in ISO/IEC 11694-5. | |
| ISO/IEC 11695-1:2015 defines the physical characteristics of optical memory cards using the holographic recording method. | |
| ISO/IEC 11695-2:2015 defines the dimensions and location of the accessible optical area of optical memory cards using the holographic recording method. | |
| ISO/IEC 11695-3:2017 specifies the optical properties and characteristics of optical memory cards using the holographic recording method. | |
| ISO/IEC 11770-1:2010 defines a general model of key management that is independent of the use of any particular cryptographic algorithm. However, certain key distribution mechanisms can depend on particular algorithm... | |
| ISO/IEC 11770-2:2018 This document defines key establishment mechanisms using symmetric cryptographic techniques. This document addresses three environments for the establishment of keys: Point-to-Point, Key Distribution Centre (KDC), and Key Translation... | |
| ISO/IEC 11770-3:2015 defines key management mechanisms based on asymmetric cryptographic techniques. It specifically addresses the use of asymmetric techniques to achieve the following goals: a) establish a shared secret key... | |
| ISO/IEC 11770-5:2011 specifies key establishment mechanisms for multiple entities to provide procedures for handling cryptographic keying material used in symmetric or asymmetric cryptographic algorithms according to the security policy in... | |
| ISO/IEC 11801-1:2017(E) This document specifies a multi-vendor cabling system which may be implemented with material from single or multiple sources. This part of ISO/IEC 11801 defines requirements that are common... | |
| ISO/IEC 11801-2:2017(E) This document specifies generic cabling within and between the buildings of office premises, or office spaces within other types of building. Additionally those premises can include industrial spaces... | |
| ISO/IEC 11801-3:2017(E) This document specifies generic cabling, which is critical for providing robust services to the automation islands in industrial premises, or industrial spaces within other types of building. Additionally... | |
| ISO/IEC 11801-4:2017(E) This document specifies generic cabling within a home and provides users with:- an application independent system capable of supporting a wide range of applications in a range of... | |
| ISO/IEC 11801-5:2017(E) This document specifies generic cabling within and to the computer room spaces of data centre premises, or computer room spaces within other types of building. Additionally those premises... | |
| ISO/IEC 11801-6:2017(E) This part of ISO/IEC 11801 specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling. | |
| ISO/IEC 11889 contains the definitions of the Trusted Platform Module (TPM) commands. These commands make use of the constants, flags, structures, and union definitions defined in ISO/IEC 11889-2. The detailed... | |
| ISO/IEC 11889-1:2015 defines the architectural elements of the Trusted Platform Module (TPM), a device which enables trust in computing platforms in general. Some TPM concepts are explained adequately in the... | |
| ISO/IEC 11889-2:2015 contains the definitions of the constants, flags, structure, and union definitions used to communicate with the TPM. Values defined in ISO/IEC 11889-2:2015 are used by the TPM commands... | |
| ISO/IEC 11889-4:2015 contains C code that describes the algorithms and methods used by the command code in ISO/IEC 11889-3. The code in ISO/IEC 11889-4:2015 augments ISO/IEC 11889-2 and ISO/IEC 11889-3... | |
| ISO/IEC 11976:2008 specifies the mechanical, physical, and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-optical Phase Change effects to enable data interchange between such disks. | |
| ISO/IEC 11989:2010(E) specifies an Application Programming Interface(API) that provides interfaces to discover and manage iSC ISO/IEC 11989:2010(E) specifies an ApplicationProgrammi ng Interface (API) that provides interfaces to discover and manageiSCSI... | |
| ISO/IEC 12034-1:2017 is Part 1 of a series of documents that specify a general-purpose format for the storage and/or communication of information in bulk form. The format is named the... | |
| ISO/IEC 12139-1:2009 is a physical and medium access control layer specification with respect to the connectivity for In-home and Access network high speed powerline communication stations. ISO/IEC 12139-1:2009 provides functional... | |
| ISO/IEC 12785-1:2009 defines the data structures that can be used to exchange language, education and training (LET) content among systems that wish to import, export, aggregate, and disaggregate packages of... | |
| ISO/IEC 12785-2:2011 specifies how to express the ISO/IEC 12785-1 information model in XML. | |
| ISO/IEC 12862:2011 specifies the mechanical, physical and optical characteristics of a 120 mm and an 80 mm dual layer DVD recordable disk to enable the interchange of such disks. It... | |
| ISO/IEC 12905:2011 specifies a set of data elements to be personalized into an integrated circuit card, encoding cardholder preferences. These data elements are to be retrieved from the card and... | |
| ISO/IEC 13156:2011 specifies a physical layer (PHY), distributed medium access control (MAC) sublayer, and an HDMI protocol adaptation layer (PAL) for 60 GHz wireless networks. | |
| ISO/IEC 13157-1:2014 specifies the NFC-SEC secure channel and shared secret services for NFCIP-1 and the Protocol Data Units and protocol for those services. | |
| ISO/IEC 13157-2:2016 specifies the message contents and the cryptographic methods for PID 01. ISO/IEC 13157-2:2016 specifies cryptographic mechanisms that use the Elliptic Curves Diffie-Hellman (ECDH) protocol for key agreement and... | |
| ISO/IEC 13157-3:2016 specifies the message contents and the cryptographic methods for PID 02. It specifies cryptographic mechanisms that use the Elliptic Curves Diffie-Hellman (ECDH) protocol with a key length of... | |
| ISO/IEC 13157-4:2016 specifies the message contents and the cryptographic mechanisms for PID 03. ISO/IEC 13157-4:2016 specifies key agreement and confirmation mechanisms providing mutual authentication, using asymmetric cryptography, and the transport... | |
| ISO/IEC 13157-5:2016 specifies the message contents and the cryptographic mechanisms for PID 04. ISO/IEC 13157-5:2016 specifies key agreement and confirmation mechanisms providing mutual authentication, using symmetric cryptography. ISO/IEC 13157-5:2016 adds... | |
| ISO/IEC 13170:2010 specifies the mechanical, physical and optical characteristics of a 120 mm and an 80 mm dual layer DVD re-recordable disk to enable the interchange of such disks. It... | |
| ISO/IEC 13249 defines a number of packages of generic data types common to various kinds of data used in multimedia and application areas, to enable that data to be stored... | |
| ISO/IEC 13249-1:2016 defines a number of packages of generic data types and table structures common to various kinds of data used in multimedia and application areas, to enable that data... | |
| ISO/IEC 13249-5:2003: introduces the still image part of ISO/IEC 13249 (all parts); gives the references necessary for ISO/IEC 13249-5:2003; defines notations and conventions specific to ISO/IEC 13249-5:2003; defines concepts specific... | |
| ISO/IEC 13249:2003: introduces the Full-Text part of ISO/IEC 13249 (all parts); gives the references necessary for ISO/IEC 13249:2003; defines notations and conventions specific to ISO/IEC 13249:2003; defines concepts specific to... | |
| ISO/IEC 13249:2016 a) defines concepts specific to this part of ISO/IEC 13249, b) defines spatial user-defined types and their associated routines. | |
| ISO/IEC 13250-2:2006 specifies the Topic Maps data model. It defines the abstract structure and interpretation of topic maps, the rules for merging topic maps and a set of fundamental subject... | |
| ISO/IEC 13250-3:2013 defines an XML-based interchange syntax for Topic Maps, which can be used to interchange instances of the data model defined in ISO/IEC 13250-2. It also defines a mapping... | |
| ISO/IEC 13250-4:2009 defines a format known as Canonical XTM, or CXTM for short. The format is an XML format, and has the property that it guarantees that two equivalent Topic... | |
| ISO/IEC 13250-5:2015 specifies a formal model for subject maps, minimal access functionality and information retrieval from subject maps and a constraint framework governing the interpretation of subject maps. Particular formalisms... | |
| ISO/IEC 13250-6:2010 defines a text-based notation for representing instances of the data model defined in ISO/IEC 13250-2. It also defines a mapping from this notation to the data model. The... | |
| ISO/IEC 13250:2003 (2nd edition) specifies two syntaxes for the interchange of Topic Maps. One of these syntaxes is based on the ISO/IEC 10744:1997 (HyTime) meta-DTD (meta Document Type Definition),... | |
| ISO/IEC 13251:2004 is a bilingual standard (English/French). It provides a certain number of graphical symbols that are typically used on office equipment such as computers, printers, telephones and copying machines. | |
| ISO/IEC 13273-1:2015 contains transverse concepts and their definitions in the subject fields of energy efficiency. This horizontal standard is primarily intended for use by technical committees in the preparation of... | |
| ISO/IEC 13273-2:2015 contains transversal concepts and their definitions in the subject field of renewable energy sources. This horizontal standard is primarily intended for use by technical committees in the preparation... | |
| ISO/IEC 13560:2009 specifies the procedure to be followed by a Registration Authority in preparing, maintaining and publishing International Registers used in ISO/IEC 26907 and ISO/IEC 26908. It does not specify... | |
| ISO/IEC 13816:2007 specifies syntax and semantics of the computer programming language ISLisp by specifying requirements for a conforming ISLisp processor and a conforming ISLisp text. The design goals for ISLisp... | |
| ISO/IEC 13818-11:2004 specifies IPMP (Intellectual Property Management and Protection) on the MPEG-2 system. MPEG-2 IPMP offers flexibility, robustness and interoperability, which allows the secure content delivery in the MPEG-2 system. | |
| ISO/IEC 13818-2:2013 specifies a coded representation of video data and the decoding process required to reconstruct pictures. It provides a generic video coding scheme which serves a wide range of... | |
| ISO/IEC 13818-4:2004 specifies how tests can be designed to verify whether coded data and decoders meet requirements specified in parts 1, 2, 3 and 7 of ISO/IEC 13818. Characteristics of... | |
| ISO/IEC 13818-7:2006 specifies MPEG-2 Advanced Audio Coding (AAC), a multi-channel audio coding standard that delivers higher quality than is achievable when requiring MPEG-1 backwards compatibility. It provides ITU-R "indistinguishable" quality... | |
| ISO/IEC 13865:2003 specifies Supplementary Service Call Transfer (SS-CT), which is applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574. SS-CT... | |
| ISO/IEC 13868:2003 specifies the signalling protocol for the support of name identification supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a... | |
| ISO/IEC 13869:2003 specifies the signalling protocol for the support of the Call Transfer supplementary service (SS-CT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected together... | |
| ISO/IEC 13870:2003 specifies the signalling protocol for the support of the Call Completion supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within... | |
| ISO/IEC 13872:2003 specifies the supplementary services Call Forwarding Unconditional (CFU), Call Forwarding Busy (CFB), Call Forwarding No Reply (CFNR) and Call Deflection (CD), which are applicable to various basic services... | |
| ISO/IEC 13873:2003 specifies the signalling protocol for the support of Call Diversion supplementary services (SS-DIV) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within... | |
| ISO/IEC 13874:2003 specifies the signalling protocol for the support of the Path Replacement additional network feature (ANF-PR) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected... | |
| ISO/IEC 13888 is concerned with non-repudiation. ISO/IEC 13888-1:2009 is a general part which defines a model for non-repudiation mechanisms providing evidence based on cryptographic check values generated using symmetric or... | |
| ISO/IEC 13888-3:2009 specifies mechanisms for the provision of specific, communication related, non-repudiation services using asymmetric cryptographic techniques. | |
| ISO/IEC 14143-1:2007 defines the concepts of FSM (Functional Size Measurement). The concepts of Functional Size Measurement (FSM) are designed to overcome the limitations of earlier methods of sizing software by... | |
| ISO/IEC 14143-2:2011: establishes a framework for the conformity evaluation of a Candidate FSM Method against the provisions of ISO/IEC 14143-1; describes a process for conformity evaluation of whether a Candidate... | |
| ISO/IEC 14143-6:2012 provides a summary of the FSM (Functional Size Measurement) related standards and the relationship between: a) the ISO/IEC 14143 series FSM framework standards that provide the definitions and... | |
| ISO/IEC 14165-151:2017(E) This part of ISO/IEC 14165 describes extensions to the Fibre Channel signaling and physical layer requirements defined in ISO/IEC 14165-142 to transport Fibre Channel over the commonly available... | |
| ISO/IEC 14165-243:2012(E) consists of four distinct Fibre Channelmappings resulting in the following four models: - FC-BB-3_ATM (FC over ATM backbone network); - FC-BB-3_SONET (FC over SONET backbone network); - FC-BB-3_IP... | |
| ISO/IEC 14443-1:2018 defines the physical characteristics of proximity cards (PICCs). ISO/IEC 14443-1:2018 is intended to be used in conjunction with other parts of ISO/IEC 14443. | |
| ISO/IEC 14443-2:2016 specifies the characteristics of the fields to be provided for power and bi-directional communication between proximity coupling devices (PCDs) and proximity cards or objects (PICCs). It does not... | |
| ISO/IEC 14443-3:2018 This document describes the following: - polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); - the byte format, the frames... | |
| ISO/IEC 14443-4:2018 This document specifies a half-duplex block transmission protocol featuring the special needs of a contactless environment and defines the activation and deactivation sequence of the protocol. This document... | |
| ISO/IEC 14476-2:2003 is an integral part of ITU-T Recommendation X.ectp ISO/IEC 14476 having the main title of Enhanced communications transport protocol, which is a family of protocol specifications designed to... | |
| ISO/IEC 14476-3:2008 defines a protocol for duplex multicast transport over the Internet where IP multicast is supported. A control tree mechanism for scalability and an error control mechanism for reliable... | |
| ISO/IEC 14476-4:2010 provides a specification of QoS management for accomplishing desirable QoS for a duplex multicast transport connection. For this purpose, it describes the QoS management operations in duplex multicast... | |
| ISO/IEC 14476-5:2008 defines a protocol for N-plex multicast transport over the Internet where IP multicast is supported. It provides the mechanisms of session control and error control. For session control,... | |
| ISO/IEC 14476-6:2010 provides a specification of QoS management for accomplishing a desired quality of service in n-plex multicast transport connections. For this purpose, it describes the QoS management operations in... | |
| ISO/IEC 14495-2:2003 defines a set of lossless (bit-preserving) and nearly lossless (where the error for each reconstructed sample is bounded by a predefined value) compression methods for coding continuous-tone (including... | |
| ISO/IEC 14496-10:2014 specifies advanced video coding for coding of audio-visual objects. | |
| ISO/IEC 14496-11:2015 specifies: 1. the coded representation of the spatio-temporal positioning of audio-visual objects as well as their behavior in response to interaction (scene description); 2. the Extensible MPEG-4 Textual... | |
| ISO/IEC 14496-12:2015 specifies the ISO base media file format, which is a general format forming the basis for a number of other more specific file formats. This format contains the... | |
| ISO/IEC 14496-13:2004 specifies: The definition, as well as Extension tags, syntax and semantics for an IPMP_Data_BaseClass to support the following functionalities. Mutual Authentication for IPMP tool to IPMP tool as... | |
| ISO/IEC 14496-16:2011 specifies MPEG-4 Animation Framework eXtension (AFX) model for representing and encoding 3D graphics assets to be used standalone or integrated in interactive multimedia presentations (the latter when combined... | |
| ISO/IEC 14496-17:2006 was developed in response to the need for a generic method for coding of text at very low bitrate as one of the multimedia components within an audiovisual... | |
| ISO/IEC 14496-18:2004 is part of the MPEG-4 suite of International Standards. It specifies font data representation, compression and streaming, providing an efficient mechanism to embed font data in MPEG-4 encoded... | |
| ISO/IEC 14496-19:2004 specifies the transmission of synthesized texture data as part of the MPEG-4 encoded audio-visual presentation. More specifically, it defines: The data structures of synthesized texture; The animation methods... | |
| ISO/IEC 14496-1:2010 specifies system level functionalities for the communication of interactive audio-visual scenes, i.e. the coded representation of information related to the management of data streams (synchronization, identification, description and... | |
| ISO/IEC 14496-20:2008 defines a scene description format (LASeR) and an aggregation format (SAF) respectively suitable for representing and delivering rich-media services to resource-constrained devices such as mobile phones. LASeR aims... | |
| ISO/IEC 14496-21:2006 describes a lightweight programmatic environment for advanced interactive multi-media applications. Designed for limited resources devices such as mobile phones, Graphics Framework eXtenstions (GFX) offer a framework that marries... | |
| ISO/IEC 14496-22:2015 specifies the Open Font Format (OFF) specification, the TrueType? and Compact Font Format (CFF) outline formats, and the TrueType hinting language. Many references to both TrueType and PostScript... | |
| ISO/IEC 14496-23:2008 specifies Symbolic Music Representation (SMR). A symbolic representation of music is a logical structure based on: symbolic elements representing audiovisual events, the relationship between those events, and aspects... | |
| ISO/IEC 14496-25:2011 describes a model for connecting 3D graphics compression tools defined in ISO/IEC 14496 to graphics primitives defined in any other standard, specification or recommendation. The goal of ISO/IEC... | |
| ISO/IEC 14496-26:2010 specifies how tests can be designed to verify whether compressed data and decoders meet requirements specified by ISO/IEC 14496-3. In ISO/IEC 14496-26:2010, encoders are not addressed specifically. An... | |
| ISO/IEC 14496-27:2009 specifies how tests can be designed to verify whether compressed data (i.e. bitstreams) and decoders meet the requirements for the synthetic 3D graphics tools specified in ISO/IEC 14496‑11:2005,... | |
| ISO/IEC 14496-29:2014 specifies web video coding for coding of audio-visual objects. | |
| ISO/IEC 14496-2:2004 provides the following elements related to the encoded representation of visual information: - Specification of video coding tools, object types and profiles, including capability to encode rectangular-based and... | |
| ISO/IEC 14496-30:2018 This document describes the carriage of some forms of timed text and subtitle streams in files based on ISO/IEC 14496-12 (the ISO base media file format). The documentation... | |
| ISO/IEC 14496-3:2009 integrates many different types of audio coding: natural sound with synthetic sound, low bitrate delivery with high-quality delivery and lossless coding, speech with music, complex soundtracks with simple... | |
| ISO/IEC 14496-4:2004 specifies how tests can be designed to verify whether bitstreams and decoders meet requirements specified in ISO/IEC 14496 (parts 1, 2 and 3) and for ISO/IEC 14496-6:2000. It... | |
| ISO/IEC 14496-8:2004 provides a framework for the carriage of ISO/IEC 14496 contents over IP networks and guidelines for designing payload format specifications for the detailed mapping of ISO/IEC 14496 content... | |
| ISO/IEC 14543-3-10:2012(E) specifies a wireless protocol for low-powered devices such as energy harvested devices in a home environment. This wireless protocol is specifically designed to keep the energy consumption of... | |
| ISO/IEC 14543-3-11:2016(E) specifies an OSI Layers 1 to 3 Frequency Modulated Wireless Protocol for low-power devices such as energy harvested devices in a home environment. The protocol is specifically designed... | |
| ISO/IEC 14543-4-3:2015(E) specifies the message structure, sequences and protocol of the application layer for use in network enhanced control devices of the Home Electronic System (HES) Class 1. It provides... | |
| ISO/IEC 14543-5-11:2018 specifies a remote user interface (RUI) for the ISO/IEC 14543-5 series on intelligent grouping and resource sharing (IGRS) for home electronic systems (HES) Class 2 and Class 3. | |
| ISO/IEC 14543-5-21:2012(E) specifies the media data stream service profile, the device interaction flow, the request and response message format used in device interaction and the description format of services provided... | |
| ISO/IEC 14543-5-3:2012(E) defines design criteria and application requirements enabled by the relevant application profiles. It also defines required or optional interaction processes, interaction interfaces, software and hardware interfaces and the... | |
| ISO/IEC 14543-5-5:2012(E) specifies the device type of all devices that conform to ISO/IEC 14543-5-1: Core Protocol, and ISO/IEC 14543-5-2#: Application Profile. It is applicable to all devices that are operating... | |
| ISO/IEC 14543-5-6:2012(E) specifies the service types that conform to ISO/IEC 14543-5-1. It is applicable to computers, household appliances and communication devices that implement media or data streaming in a local... | |
| ISO/IEC 14543-5-7:2015(E) specifies the architecture and framework for the remote access of IGRS devices and services in the home electronic system. The remote access communications protocol and application profiles are... | |
| ISO/IEC 14651:2016 defines the following. - A reference comparison method. This method is applicable to two character strings to determine their collating order in a sorted list. The method can... | |
| ISO/IEC 14662:2010 specifies the framework for co-ordinating the integration of existing International Standards and the development of future International Standards for the inter-working of Open-edi Parties via Open-edi and provides... | |
| ISO/IEC 14763-2:2012(E) specifies requirements for the planning, installation and operation of cabling and cabling infrastructures (including cabling, pathways, spaces, earthing and bonding) in support of generic cabling standards and associated... | |
| ISO/IEC 14763-2:2012+A1:2015 (E) specifies requirements for the planning, installation and operation of cabling and cabling infrastructures (including cabling, pathways, spaces, earthing and bonding) in support of generic cabling standards and... | |
| ISO/IEC 14763-3:2014(E) specifies systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC 11801, ISO/IEC 24764, ISO/IEC 24702... | |
| ISO/IEC 14763-3:2014+A1:2018 specifies systems and methods for the inspection and testing of installed optical fibre cabling designed in accordance with premises cabling standards including ISO/IEC 11801, ISO/IEC 24764, ISO/IEC 24702... | |
| ISO/IEC 14763-4:2018(E) specifies the measurement at frequencies of end-to-end links of two- and four-pair balanced cabling of 100 MHz of Class D and 250 MHz of Class E including free... | |
| ISO/IEC 14764:2006 describes in greater detail management of the Maintenance Process described in ISO/IEC 12207, including Amendments. It also establishes definitions for the various types of maintenance. ISO/IEC 14764:2006 provides... | |
| ISO/IEC 14776-154:2017(E) This document specifies the functional requirements for the Serial Attached SCSI (SAS) physical interconnect, which is compatible with the Serial ATA physical interconnect. The SAS Protocol Layer -... | |
| ISO/IEC 14776-251:2014(E) describes a SCSI transport protocol for USB-2 and USB-3 with the following properties: a) mechanism to send commands associated with any SCSI standard to a USB device; b)... | |
| ISO/IEC 14776-261:2012(E) defines the protocol layer of the Serial Attached SCSI (SAS) interconnect and three transport protocols that use the SAS interconnect: - Serial SCSI Protocol (SSP): a mapping of... | |
| ISO/IEC 14776-262:2017(E) This standards defines the model and command set extensions to be used in conjunction with the SCSI Primary Command Set Standard - 4 (SPC-4) to facilitate operation of... | |
| ISO/IEC 14776-263:2018 The SCSI family of standards provides for many different transport protocols that define the rules for exchanging information between different SCSI devices. This document defines the rules for... | |
| ISO/IEC 14776-323:2017, defines the model and command set extensions to be used in conjunction with the SCSI Primary Command Set standard - 4 (SPC-4) to facilitate operation of SCSI direct-access... | |
| ISO/IEC 14776-326:2015(E) defines a Reduced Block Command set for logical block devices. The Reduced Block Commands along with the required SPC-2 commands and their restrictions described in this standard, fully... | |
| ISO/IEC 14776-333:2013(E) defines the command set extensions in order to facilitate operation of the sequential-access device type. It is implemented in conjunction with the requirements of the SCSI Architecture Model-4... | |
| ISO/IEC 14776-453:2009(E) defines the SCSI commands that are mandatoryand optional for all SCSI devices ISO/IEC14776-453:200 9(E) defines the SCSI commands that are mandatory and optional forall SCSI devices. Support for... | |
| ISO/IEC 14776-454:2018(E) provides for many different types of SCSI devices and specifies the interfaces, functions and operations necessary to ensure interoperability between conforming SCSI implementations. This standard defines the SCSI... | |
| ISO/IEC 14776:2011(E) documents the commands and parameters necessary to manage and sense the state of the power supplies, cooling devices, displays, indicators, individual drives, and other non-SCSI elements installed in... | |
| ISO/IEC 14843:2003 specifies the signalling protocol for the support of the Call Offer supplementary service (SS-CO) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together... | |
| ISO/IEC 14844:2003 specifies the signalling protocol for the support of the Do Not Disturb and Do Not Disturb Override supplementary services (SS-DND and SS-DNDO) at the Q reference point between... | |
| ISO/IEC 14846:2003 specifies the signalling protocol for the support of the Call Intrusion supplementary service (SS-CI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together... | |
| ISO/IEC 14882:2017 specifies requirements for implementations of the C++ programming language. The first such requirement is that they implement the language, so this document also defines C++. Other requirements and... | |
| ISO/IEC 14888 specifies digital signature with appendix. As no part of the message is recovered from the signature (the recoverable part of the message is empty), the signed message consists... | |
| ISO/IEC 14888-3:2018 This document specifies digital signature mechanisms with appendix whose security is based on the discrete logarithm problem. This document provides - a general description of a digital signature... | |
| ISO/IEC 14908-1:2012 specifies a communication protocol for local area control networks. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. | |
| ISO/IEC 14908-2:2011 specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in local area control networks and is used in conjunction with ISO/IEC 14908-1. The channel... | |
| ISO/IEC 14908-3:2011 specifies the control network Power Line (PL) channel and serves as a companion document to ISO/IEC 14908-1. It presents the information necessary for the development of a PL... | |
| ISO/IEC 14908-4:2011 specifies the transporting of the Control Network Protocol (CNP) packets for commercial local area control networks over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP... | |
| ISO/IEC 14957:2010 specifies the notation to be used for stating the format, i.e. the character classes, used in the representation of data elements and the length of these representations. It... | |
| ISO/IEC 15026-1:2013 defines assurance-related terms and establishes an organized set of concepts and their relationships, thereby establishing a basis for shared understanding of the concepts and principles central to all... | |
| ISO/IEC 15026-2:2011 specifies minimum requirements for the structure and contents of an assurance case to improve the consistency and comparability of assurance cases and to facilitate stakeholder communications, engineering decisions,... | |
| ISO/IEC 15026-3:2015 specifies the concept of integrity levels with corresponding integrity level requirements that are required to be met in order to show the achievement of the integrity level. It... | |
| ISO/IEC 15026-4:2012 gives guidance and recommendations for conducting selected processes, activities and tasks for systems and software products requiring assurance claims for properties selected for special attention, called critical properties. | |
| ISO/IEC 15045-2:2012(E) specifies a gateway architecture that provides an interconnection between one or more Wide Area Networks (WANs) and one or more Home Area Networks (HANs). It is not needed... | |
| ISO/IEC 15050:2003 specifies the signalling protocol for the support of the Advice Of Charge supplementary services (SS-AOC) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected... | |
| ISO/IEC 15051:2003 specifies supplementary service Recall (SS-RE), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. SS-RE is... | |
| ISO/IEC 15052:2003 specifies the signalling protocol for the support of Recall supplementary service (SS-RE) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within Private... | |
| ISO/IEC 15053:2003 specifies Additional Network Feature Call Interception (ANF-CINT), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. | |
| ISO/IEC 15054:2003 specifies the signalling protocol for the support of the additional network feature Call Interception (ANF-CINT) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected... | |
| ISO/IEC 15067-3:2012(E) specifies an energy management model for programs that manage the consumer demand for electricity using a method known as "demand response". Three types of demand response are specified... | |
| ISO/IEC 15149-1:2014 specifies the physical layer and media access control layer protocols of wireless network over a magnetic field in a low frequency band (~300 kHz) for wireless communication in... | |
| ISO/IEC 15149-2:2015 Standard establishes a system for an in-band network, from which both wireless power transfer and data transmission are carried out simultaneously at the same frequency band. It provides... | |
| ISO/IEC 15149-3:2016 specifies relay protocol to extend effective network coverage of magnetic field area networks. The addressing, request and response codes are defined. | |
| ISO/IEC 15149-4:2016 specifies security protocol for authentication in magnetic field networks. | |
| ISO/IEC 15149:2011 specifies the physical layer and media access control layer protocols of a wireless network over a magnetic field in a low frequency band (~300 kHz), for wireless communication... | |
| ISO/IEC 1539-1:2018 This document specifies the form and establishes the interpretation of programs expressed in the base Fortran language. The purpose of this document is to promote portability, reliability, maintainability,... | |
| ISO/IEC 15408-1:2009 establishes the general concepts and principles of IT security evaluation and specifies the general model of evaluation given by various parts of ISO/IEC 15408 which in its entirety... | |
| ISO/IEC 15408-2:2008 defines the content and presentation of the security functional requirements to be assessed in a security evaluation using ISO/IEC 15408. It contains a comprehensive catalogue of predefined security... | |
| ISO/IEC 15408-3:2008 defines the assurance requirements of the evaluation criteria. It includes the evaluation assurance levels that define a scale for measuring assurance for component targets of evaluation (TOEs), the... | |
| ISO/IEC 15414:2015 provides: a) a language (the enterprise language) comprising concepts, structures, and rules for developing, representing and reasoning about a specification of an ODP system from the enterprise viewpoint... | |
| ISO/IEC 15415:2011 specifies two methodologies for the measurement of specific attributes of two-dimensional bar code symbols, one of these being applicable to multi-row bar code symbologies and the other to... | |
| ISO/IEC 15416:2016: - specifies the methodology for the measurement of specific attributes of bar code symbols; - defines a method for evaluating these measurements and deriving an overall assessment of... | |
| ISO/IEC 15418:2016 - specifies sets of Data Identifiers and Application Identifiers for the purpose of identifying encoded data, and - identifies the organizations responsible for their maintenance. | |
| ISO/IEC 15419:2009 describes the characteristics and defines categories of bar code digital imaging systems, identifies the attributes of each system which are required to be controlled, and specifies minimum requirements... | |
| ISO/IEC 15421:2010 specifies the requirements and test methods for physical and related attributes of a bar code master. It covers all forms of bar code master, irrespective of the mode... | |
| ISO/IEC 15423:2009 defines the test equipment and procedures to be used to determine the performance of bar code scanning and decoding equipment. It deals with bar code scanning and decoding... | |
| ISO/IEC 15426-2:2015 defines test methods and minimum accuracy criteria applicable to verifiers using the methodologies of ISO/IEC 15415 for multi-row bar code symbols and two-dimensional matrix symbologies, and specifies reference... | |
| ISO/IEC 15429:2003 specifies the signalling protocol for the support of the Wireless Terminal Location Registration supplementary service (SS-WTLR) and the Wireless Terminal Information exchange additional network feature (ANF-WTINFO) at the... | |
| ISO/IEC 15431:2003 specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated services... | |
| ISO/IEC 15433:2003 specifies the signalling protocol for the support of the Wireless Terminal Authentication supplementary services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated services Network eXchanges... | |
| ISO/IEC 15434:2006 defines the manner in which data is transferred to high-capacity automatic data capture (ADC) media from a supplier's information system and the manner in which data is transferred... | |
| ISO/IEC 15438:2015 specifies the requirements for the bar code symbology known as PDF417. It specifies PDF417 symbology characteristics, data character encodation, symbol formats, dimensions, error correction rules, reference decoding algorithm,... | |
| ISO/IEC 15444-10:2011 defines a set of lossless (bit-preserving) and lossy compression methods for coding continuous-tone, bi-level, grey-scale, colour digital volumetric images, or multi-component volumetric images. This set of methods extends... | |
| ISO/IEC 15444-11:2007 provides a syntax that allows JPEG 2000 coded image data to be protected for transmission over wireless channels and networks. Protection services include error detection and correction capability... | |
| ISO/IEC 15444-13:2008 defines a normative entry level JPEG 2000 encoder providing one or more optional complete encoding paths that use various features defined in ISO/IEC 15444. It provides for an... | |
| ISO/IEC 15444-14:2012 specifies an XML document, referred to as JPXML, which is designed primarily for representing JPEG 2000 file format and marker segments in codestream, and referring method of internal... | |
| ISO/IEC 15444-2:2004 defines a set of lossless (bit-preserving) and lossy compression methods for coding continuous-tone, bi-level, grey-scale, colour digital still images, or multi-component images. ISO/IEC 15444-2:2004: specifies extended decoding processes... | |
| ISO/IEC 15444-3:2007 specifies the use of the wavelet-based JPEG 2000 codec for the coding and display of timed sequences of images (motion sequences), possibly combined with audio, and composed into... | |
| ISO/IEC 15444-4:2004 specifies the framework, concepts, methodology for testing, and criteria to be achieved to claim compliance with ISO/IEC 15444-1. It provides a framework for specifying abstract test suites and... | |
| ISO/IEC 15444-5:2015 defines a set of lossless and lossy compression methods for coding continuous-tone, bi-level, greyscale or colour digital still images. This Recommendation International Standard provides three independently created software... | |
| ISO/IEC 15444-8:2007 specifies the framework, concepts, and methodology for securing JPEG 2000 codestreams. It defines a normative codestream syntax containing information for interpreting secure image data; a normative process for... | |
| ISO/IEC 15444-9:2005 defines, in an extensible manner, syntaxes and methods for the remote interrogation and optional modification of JPEG 2000 codestreams and files in accordance with their definition in the... | |
| ISO/IEC 15459-1:2014 specifies a unique string of characters for the identification of individual transport units. The character string is intended to be represented in a bar code label or other... | |
| ISO/IEC 15459-2:2015 specifies the procedural requirements to maintain identities and outlines the obligations of the Registration Authority and Issuing Agencies. ISO/IEC 15459-2:2015 excludes those entities where ISO has designated Maintenance... | |
| ISO/IEC 15459-3:2014 specifies the common rules applicable for unique identification that are required to ensure full compatibility across different identities. | |
| ISO/IEC 15459-4:2014 specifies a unique string of characters for the identification of individual products and product packages. The character string is intended to be represented in a linear bar code... | |
| ISO/IEC 15459-5:2014 specifies a unique string of characters for the identification of individual returnable transport items (RTIs). The character string is intended to be represented in a bar code label... | |
| ISO/IEC 15459-6:2014 specifies a unique string of characters for the identification of groupings of products, product packages, transport units and items. The character string is intended to be represented in... | |
| ISO/IEC 15476-3:2006 explains the Data definitions subject area of the CDIF semantic metamodel, that defines the primitive data types and the objects which are used for structured data. The CDIF... | |
| ISO/IEC 15476-4:2005 explains the Data models subject area. The CDIF semantic metamodel is used to ensure that the information held by tools communicating using CDIF is transferred with an agreed... | |
| ISO/IEC 15476-6:2006 defines the State/event subject area of the CDIF semantic metamodel. The CDIF semantic metamodel is used to ensure that the information transferred by tools communicating using CDIF is... | |
| ISO/IEC 15504 provides a framework for the assessment of processes. This framework can be used by organizations involved in planning, managing, monitoring, controlling, and improving the acquisition, supply, development, operation,... | |
| ISO/IEC 15504-2:2003 defines the requirements for performing process assessment as a basis for use in process improvement and capability determination. Process assessment is based on a two dimensional model containing... | |
| ISO/IEC 15504-5:2012 provides an example of a Process Assessment Model for use in performing a conformant assessment in accordance with the requirements of ISO/IEC 15504-2. ISO/IEC 15504-5:2012 provides a detailed... | |
| ISO/IEC 15504-6:2013 constitutes a Process Assessment Model, conformant with the requirements of ISO/IEC 15504-2, for the assessment of process capability of system life cycle processes. The Process Dimension of this... | |
| ISO/IEC 15505:2003 specifies supplementary service Message Waiting Indication (SS-MWI), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified... | |
| ISO/IEC 15506:2003 specifies the signalling protocol for the support of the Message Waiting Indication supplementary service (SS-MWI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected... | |
| ISO/IEC 15693 forms part of a series of International Standards that specify a contactless smart card. The card can be carried by members of the public in a purse or... | |
| ISO/IEC 15693-1:2018 This document defines the physical characteristics of vicinity cards (VICCs). It is intended to be used in conjunction with other parts of the ISO/IEC 15693 series. | |
| ISO/IEC 15693-3:2009 specifies: protocol and commands, other parameters required to initialize communications between a vicinity integrated circuit card and a vicinity coupling device, methods to detect and communicate with one... | |
| ISO/IEC 15772:2003 specifies the signalling protocol for the support of the Common Information additional network feature (ANF-CMN) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected... | |
| ISO/IEC 15909-1:2004 defines a semi-graphical modelling language for the specification, design and analysis of discrete event systems, including software and in particular distributed and parallel systems where concurrency is an... | |
| ISO/IEC 15909-2:2011 defines an XML-based transfer format for Petri nets, which are defined conceptually and mathematically in ISO/IEC 15909-1. This transfer format enables the exchange of Petri nets among different... | |
| ISO/IEC 15938-10:2005 specifies a metadata system for describing multimedia content. It specifies the schema definition across all parts of ISO/IEC 15938. ISO/IEC 15938-10:2005 collects together the description tools specified in... | |
| ISO/IEC 15938-12:2012 describes the query format tools which may be used independently or in combination with other parts of ISO/IEC 15938. Each query format tool is described in two normative... | |
| ISO/IEC 15938-14:2018 provides the reference software, specifies the conformance testing, and gives usage guidelines for ISO/IEC 15938‑13. | |
| ISO/IEC 15938-5:2003 specifies a metadata system for describing multimedia content. ISO/IEC 15938-5:2003 specifies the Multimedia Description Schemes (MDS) description tools (Description Schemes, Descriptors, and datatypes) that comprise ISO/IEC 15938-5:2003 by... | |
| ISO/IEC 15938-6:2003 is the reference software for ISO/IEC 15938 standard. It implements the normative components of the ISO/IEC 15938 standard, which are the descriptors and description schemes and their coding... | |
| ISO/IEC 15938-7:2003 specifies a metadata system for describing multimedia content. ISO/IEC 15938-7:2003 specifies how tests can be designed to verify whether descriptions and description consuming terminals meet the specifications of... | |
| ISO/IEC 15938-9:2005 collects standard profiles and levels for MPEG-7, specified across all parts of ISO/IEC 15938. While all parts are potential candidates for profiling, current profiles concentrate on the Description... | |
| ISO/IEC 15940:2013 aims to update ISO/IEC 15940:2006 to take into account the changes of ISO/IEC 12207:2008 and to add/complete the set of Software Engineering Environment services for software and system... | |
| ISO/IEC 15944-20:2015 specifies the properties of Base Functional Specification View (FSV) Standards in order to best meet the requirements of the Business Operational View (BOV) with interoperable implementations. Base FSV... | |
| ISO/IEC 15944-2:2015 specifies procedures to be followed in establishing, maintaining, and publishing registers of unique, unambiguous and permanent identifiers and meanings that are assigned to Open-edi scenarios and scenario components. | |
| ISO/IEC 15944-4:2015 provides a set of UML class diagrams and conceptual explanations that circumscribe the Open-edi Business Transaction Ontology (OeBTO). It explains the mechanics of a business transaction state machine,... | |
| ISO/IEC 15944-5:2008 is directed at being able to identify and reference laws and regulations impacting eBusiness scenarios and scenario components as external constraints. The primary source of such external constraints... | |
| ISO/IEC 15944-7:2009 provides a consolidated vocabulary of eBusiness concepts as found and defined in ISO/IEC 14662 and the existing parts of ISO/IEC 15944, namely, Parts 1, 2, 4, 5, 6... | |
| ISO/IEC 15944-8:2012 has been developed to support modelling generic international requirements for identifying and providing privacy protection of personal information throughout any kind of information and communications technology (ICT) based... | |
| ISO/IEC 15944-9:2015 presents a framework consisting of several models, including a reference model, a model of concepts, a content model, an information model, as well as rules, templates and other... | |
| lSO/IEC 15897:2011 specifies the information that can appear in a Cultural Specification and defines the procedures for registering such specifications. The Cultural Specifications can include freeform Narrative Cultural Specifications and... | |
| Manufacturers of bar code equipment and users of bar code technology require publicly available standard symbology specifications to which they can refer when developing equipment and software. ISO/IEC 15420:2009 specifies... | |
| Offers a model for reasoning about, representing, managing and developing re-usable specifications for relationships between resources; notational tools for specifying relationships, their representation and management; definitions of generic management information... | |
| Provides developers of OSI recommendations/inte rnational standards that contain managed object definitions with generic definitions of managed object classes which may be used as superclasses, using the template notation defined... | |
| Provides the definition of three built-in operations -Probe, Acknowledge and Cancel - which are of general utility to designers of ROSE-based applications. | |
| Provides the framework for the realization as an OSI application context of the abstracts concepts of operation package and association contract defined in ITU-T Rec. X.880 ISO/IEC 13712-1. Focuses on... | |
| Provides the mapping of ROSE APDUs onto the A-UNIT-DATA service, and the inclusion of three built-in operations -Probe, Acknowledge and Cancel - which are of general utility to designers of... | |
| Provides the mechanical, electrical and signalling protocol specifications for an efficient simplex high-performance point-to-point interface between pieces of data-processing equipment. Facilitates the development and use of computer systems by providing... | |
| Provides the specification of management information within an Open System related to those operations of the OSI Data Link Layer specified by the specifications in this document. | |
| Replaces line 2 of annex A with new text. | |
| Replaces some clauses and the annexes B, C, D and E (corrigendum also applies to ITU-T Rec. X.740). | |
| Replaces subclause 4.7 by a new formulated text. | |
| Replaces the existing definitions in clause 6 by new wording. | |
| Replaces the scope sentence in subclauses 5.3.3.2, 5.3.3.3, 5.3.3.4, 5.3.3.5, and 5.3.3.6. Replaces text in subclause 6.3.2.1. | |
| Replaces the wording of some clauses and subclauses of ISO/IEC 10728:1993 and adds a new annex E. | |
| Replaces the wording of some clauses and subclauses of ISO/IEC 10741-1:1995 and adds some new definitions and clauses and subclauses. | |
| Replaces the wording of some clauses and subclauses. | |
| Specifies a 26-pole connector for use at the interface between data terminal equipment and data circuit terminating equipment. Is applicable where the functional characteristics of the interface conform to 100... | |
| Specifies a 50-pole connector, including the necessary mateability dimensions and the assignment of contact numbers, for use at the interface between data terminal equipment (DTE) and data circuit terminating equipment... | |
| Specifies a client-server model of printing in accordance with the Distributed-office-a pplications Model (ISO/IEC 10031-1). Together, the capabilities provided can enable users to create and produce high-quality office documents in... | |
| Specifies a client-server type model (according to ISO/IEC 10031-1), functions and services, a specific model for managing documents, the service using the principles established by ISO/IEC 10021-3, and the usage... | |
| Specifies a format and associated system requirements for record structure for the interchange of information on media between users of information processing systems by specifying record structures, the attributes of... | |
| Specifies a format and associated system requirements for volume and boot block recognition, volume structure, file structure and record structure for the interchange of information between users of information processing... | |
| Specifies a format and associated system requirements for volume and file structure for the interchange of information between users of information processing systems using CD-WO, hybrid CD-WO and CD-ROM disks... | |
| Specifies a general framework addressing the following six components: conformance in the standard itself; test requirements document (defining what shall be tested for a computer graphics standard); test specifications document... | |
| Specifies a general framework for the provision of access control. The purpose of access control is to counter the threat of unauthorized operations involving a computer or communication system. | |
| Specifies a general framework for the provision of confidentiality services. | |
| Specifies a general framework for the provision of integrity services. | |
| Specifies a language dependent layer for the C language in which the Programmer's Imaging Kernel System (IPI-PIKS) and the Image Interchange Facility (IPI-IIF) Application Program Interfaces (APIs) are embedded duly... | |
| Specifies a lossless compression algorithm (DCLZ - Data Compression according to Lempel and Ziv) to reduce the number of bits required to represent information coded by means of 8-bit bytes. | |
| Specifies a lossless compression algorithm to reduce the number of bytes required to represent data. The algorithm is known as Adaptive Lossless Data Compression algorithm (ALDC). | |
| Specifies a model for procedure calls, and a reference syntax for mapping to and from the model. The syntax is referred to as the Interface Definition Notation. The model includes... | |
| Specifies a protocol to be used by boundary intermediate systems to acquire and maintain information for the purpose of routeing NPDUs between different routeing domains. Lays down the procedures for... | |
| Specifies a protocol to be used by End Systems and Intermediate Systems in order to provide security services in the Network layer, which is defined by CCITT Rec. X.213, ISO/IEC... | |
| Specifies a set of generic facilities to assist in the provision of security services in application layer protocols. Relates to the Security Exchange Service Element (SESE) and contains the protocol... | |
| Specifies a set of generic facilities to assist in the provision of security services in application layer protocols. Relates to the Security Exchange Service Element (SESE) and defines the service. | |
| Specifies a unique coded character set for use as G0 set and a series of coded character sets of up to 96 characters for use as G1, G2 and G3... | |
| Specifies an algorithm for the reduction of the number of bits required to represent information. This process is known as data compression. The algorithm uses binary arithmetic coding and provides... | |
| Specifies definitions of essential concepts, the environment in which the characteristics shall be tested, the environments in which the cartridge shall be operated and stored, the mechanical, physical and dimensional... | |
| Specifies definitions of the essential concepts, the environment in which the characteristics are to be tested, the environments in which the cartridge is to be operated and stored, the mechanical,... | |
| Specifies general principles for the mappings between the OSI Data Link service, both connection-mode (CO-DLS) and connectionless-mode (CL-DLS), and standard Data Link protocols. Specifies the detailed mappings M1, M2, M5... | |
| Specifies how incremental cursor control is effected as a result of user interaction with a text editor. Cursor control in form filling and spread sheet applications, cursor control in editing... | |
| Specifies how tests can be designed to verify whether bitstreams and decoders meet requirements specified in parts 1, 2 and 3 of ISO/IEC 11172. Summarizes the requirements, cross references them... | |
| Specifies normative compliance tests for the ITU-T Rec.T.81 (ISO/IEC 10981-1) encoding and decoding processes. These compliances tests are applicable to "stand-alone" generic implementations of one or more of the encoding... | |
| Specifies PINX reference configuration, reference points, use of the PINX reference configuration. The configuration specified is not intended to require any specific implementation of a PINX, but only to provide... | |
| Specifies processes for converting source image data to compressed image data, processes for converting compressed image data to reconstructed image data, coded representations for compressed image data, and gives guidance... | |
| Specifies the abstract syntax of the Document Printing Application (DPA) access protocol, how this protocol supports the DPA abstract service, the mapping of the DPA onto the services used and... | |
| Specifies the bidirectional interface between a transaction manager and a resource manager (the XA interface) in an X/Open Distributed Transaction Processing (DTP) environment. Technically identical to X/Open CAE Specification. Contains... | |
| Specifies the Call Offer supplementary service (SS-CO), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. | |
| Specifies the Calling Line Identification Presentation (SS-CLIP), Connected Line Identification Presentation (SS-COLP) and Calling/Connected Line Identification Restriction (SS-CLIR), which are applicable to various basic services supported by Private Integrated Services... | |
| Specifies the characteristics of 300 mm optical disk cartridges (ODC) of the WORM type providing for embossed information and for data to be written once and read multiple times. | |
| Specifies the characteristics of 300 mm optical disk cartridges (ODC) providing for embossed information and for data to be written once and read multiple times (WORM). Defines the conditions for... | |
| Specifies the characteristics of 90 mm flexible disk cartridges of 10 MByte formatted capacity. Specifies the mechanical, physical and magnetic characteristics of the cartridge, so as to provide interchangeability between... | |
| Specifies the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 230 Mbytes per cartridge. Specifies three related, but different implementations of such cartridges: Type R/W, type... | |
| Specifies the coded representation of high quality audio for storage media and the method for decoding of high quality audio signals. Is intended for application to digital storage media providing... | |
| Specifies the coded representation of video for digital storage media and the decoding process. Is primarily applicable to digital storage media supporting a continuous transfer rate up to about 1,5... | |
| Specifies the conditions for conformance testing and the reference drive, the environments in which the cartridges are to be operated and stored, the mechanical, physical and dimensional characteristics of the... | |
| Specifies the conditions for conformance testing; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the case and of the... | |
| Specifies the dimensions, location, nature and assignment of each of the coupling areas to be provided for interfacing slot or surface card coupling devices (CCDs) with contactless integrated circuit(s) cards... | |
| Specifies the mechanical, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. It also specifies the method of recording, quality of the... | |
| Specifies the mechanical, physical and magnetical characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. It also specifies the method of recording, the quality of... | |
| Specifies the method by which a network-layer interworking unit (IWU) uses the X.25 packet layer protocol to support the OSI connection-mode network service. The specification is expressed in terms of... | |
| Specifies the minimum information that shall be included in the specification sheets of copying machines and defines tests to verify these specifications. Is intended to facilitate the users in selecting... | |
| Specifies the minimum information that shall be included in the specification sheets of printers enabling users to compare the characteristics of different machines and select a suitable printer. Applies to... | |
| Specifies the model based specification language VDM-SL (Vienna Development Method - Specification Language). Contains the mathematical and interchange representation, gives the syntax, the static and the dynamic semantics, and conformity... | |
| Specifies the nature and characteristics of the fields to be provided for power and bidirectional communications between card coupling devices and contactless integrated circuit(s) cards of the ID-1 card type... | |
| Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recorded format (DATA/DAT) and the recording method, thereby allowing data interchange between drives by means... | |
| Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recording method and the recorded format (Digital Data Storage - Data Compression, DDS-DC), thereby allowing... | |
| Specifies the physical and magnetic characteristics and provides a format and recording method, thus allowing, together with ISO 1001, full data interchange by means of such magnetic tape cartridges. Annexes... | |
| Specifies the physical and magnetic characteristics of 12,7 mm wide, 36-track magnetic tape cartridges to enable interchangeabilty of such cartridges. | |
| Specifies the physical and magnetic characteristics of a 12,7 mm wide, 112-track magnetic tape cartridge, to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals,... | |
| Specifies the physical and magnetic characteristics of a 12,7 mm wide, 128-track magnetic tape cartridge, to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals,... | |
| Specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives and specifies the quality of the recorded... | |
| Specifies the physical and magnetic characteristics to enable interchangeability of the cartridges, the quality of the recorded signals, the format and the recording method, thus allowing, together with ISO 1001,... | |
| Specifies the physical and magnetic characteristics, to enable interchangeability of the cartridges. Also specifies the quality of the recorded signals, a format - called digital linear tape 1 (DLT 1)... | |
| Specifies the physical and magnetic characteristics. Also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of... | |
| Specifies the physical and magnetic characteristics. Also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing full data interchange by means of such... | |
| Specifies the procedure to be followed by a Registration Authority in preparing, maintaining and publishing a register of names (identifiers) allocated to MHEG Registered Objects. | |
| Specifies the procedure to be followed by a registration authority in preparing, maintaining und publishing an international register of numeric identifiers allocated to the algorithms, excluding cryptographic ones. Describes in... | |
| Specifies the processing of valid Standard Generalized Markup Language (SGML) documents. Document Style Semantics and Specification Language (DSSSL) defines the semantics, syntax, and processing model of languages for the specification... | |
| Specifies the programming language which is derived from the ANSI X3.113-1987. For details of the syntax and semantics see ANSI X3.113-1987. Annexes A and B are for information only. | |
| Specifies the protocol and procedures for the Remote Operation Service Element. The ROSE procedures are defined in terms of the interactions between peer ROSE protocol machines through the use of... | |
| Specifies the relationships between the relevant OSI management Recommendations and International Standards and the definition of managed object classes, the appropriate methods to be adopted for the definition of managed... | |
| Specifies the syntax and semantics of the programming language by specifying requirements for a processor and for a conforming program. Includes an alphabetical index. Annexes A to G are for... | |
| Specifies the system layer of the coding. Was developed principally to support the combination of the video and audio coding methods defined in ISO/IEC 11172-2 and ISO/IEC 11172-3. The system... | |
| Specifies two implementations: Type R/W (data to be written, read and erased many times) and type WO (having write once, read multiple functionality). Specifies the conditions for conformance testing and... | |
| Specifies: the abstract syntax of the access protocol; how the access protocol supports the abstract service as defined in ISO/IEC 10166-1; the mapping of the access protocol onto the services... | |
| The goal of the non-repudiation service is to generate, collect, maintain, make available and validate evidence concerning a claimed event or action in order to resolve disputes about the occurrence... | |
| The intent of ISO/IEC 11693-1:2012 is to provide necessary information for card manufacturers, card issuers, and card users interested in interchanging information encoded on optical memory cards. ISO/IEC 11693-1:2012 serves... | |
| The items to be amended are defined as a series of changes and additions to the existing test. | |
| The need exists to identify the data carrier a reader detects in autodiscrimination environments. The Symbology Identifier concept provides a standardized way for a device receiving data from a reader... | |
| The objectives are to provide a standard cable bus for the interconnection of multiple devices, both backplane bus systems, such as the IEC 821 VMEbus, and stand-alone apparatus; to specify... | |
| The Open-edi Reference Model (ISO/IEC 14662:2010, Clause 4) states: "The intention is that the sending, by an Open-edi Party, of information from a scenario, conforming to Open-edi standards, shall allow... | |
| The primary purpose of ISO/IEC 15944-10:2013 is to provide, in a single consolidated document, an integrated approach for the key concepts and their definitions as well as rules pertaining to... | |
| The procedures specified do not prevent communication between transport entities conforming to ISO/IEC 8073 only and those conforming to ISO/IEC 8073 as well as to this standard. The use of... | |
| The SCSI parallel interface (SPI) is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (i.e., 8 or... | |
| The SCSI protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (8 or 16). Data may... | |
| The services interface specified gives any program full access to all IRDS services. Defines the semantics of this interface, and also specifies the language bindings for ISO Pascal (ISO 7185). | |
| The technology of bar coding is based on the recognition of patterns encoded in bars and spaces of defined dimensions. There are numerous methods of encoding information in bar code... | |
| The technology of bar coding is based on the recognition of patterns encoded in dark and light elements of defined dimensions according to rules defining the translation of characters into... | |
| There are two types of digital signature mechanism: When the verification process needs the message as part of the input, the mechanism is called "signature mechanism with appendix". A hash-function... | |
| Thin flexible cards (TFC), the subject of ISO/IEC 15457, are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks,... | |
| Thin flexible cards are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers and stored value. For these... | |
| Thin flexible cards, the subject of this International Standard, are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks,... | |
| This amendment to ISO/IEC 14165-116:2005 (Fibre Channel - 10 Gigabit Fibre Channel) corrects the definition of the clock synchronization primitives (Clock Synchronization Word X, Clock Synchronization Word Y, and Clock... | |
| This document defines the MP4 file format, as derived from the ISO Base Media File format. | |
| This part of ISO/IEC 15504:2004 provides overall information on the concepts of process assessment and its use in the two contexts of process improvement and process capability determination. It describes... | |
| Untitled Document Home Electronic System (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the services and protocol of the application... | |
| Untitled DocumentFibre Channel is a high speed serial interface using either optical or electrical connections (i.e., the physical layer) at data rates currently up to 2 Gbits/s with a growth... | |
| Untitled DocumentFibre Channel provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance... | |
| Untitled DocumentHome Electronic System (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard defines the mandatory and optional requirements for medium specific... | |
| Untitled DocumentHome electronic system (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard defines the mandatory and optional requirements for the medium... | |
| Untitled DocumentHome Electronic System (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the general features as well as the basic... | |
| Untitled DocumentHome electronic system (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the general principles for network device management. | |
| Untitled DocumentHome Electronic System (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the services and protocol in a physical layer... | |
| Untitled DocumentHome electronic system (HES) standards describe the architecture of home control systems including communication and interoperability aspects. This International Standard specifies the structure and functioning of servers for the... | |
| Untitled DocumentISO/IEC 11002:2008(E) is an Application Programming Interface (API) which provides management interfaces as defined in ISO/IEC 14776-453 (Information technology - Small computer system interface (SCSI) - Part 453: Primary... | |
| Untitled DocumentISO/IEC 14165-133:2010(E) describes how switches communicate and interact with one another to form a Fabric of switches. It includes: a) E_Port Operation and Fabric Configuration;b) Path selection (FSPF and... | |
| Untitled DocumentISO/IEC 14165-321:2009(E) Fibre Channel is a high speed serial interface using either optical or electrical connections (i.e., the physical layer) at data rates currently up to 2 Gbits/s with... | |
| Untitled DocumentISO/IEC 14165-521 defines an application programming interface (API) by which a storage application may perform the functions of one or more SCSI Targets or Initiators, and control high-performance command/data... | |
| Untitled DocumentISO/IEC 14543-4-1:2008(E) specifies the services and protocol of the application layer for usage in Home Electronic Systems (HES). It provides the services and the interface to the user process. | |
| Untitled DocumentISO/IEC 14543-4-2:2008(E) specifies the media independent requirements for the data link layer and the requirements for the network layer and the transport layer for Home Electronic Systems (HES). It... | |
| Untitled DocumentISO/IEC 14543-5-1:2010(E) series specifies the services and protocol of the application layer for use by IGRS Devices in the Home Electronic System. An IGRS Device (Intelligent Grouping and Resource... | |
| Untitled DocumentISO/IEC 14543-5-22:2010(E) specifies the file data streaming application profile, device interaction flow model, the request and response messages in the device interaction process, and the service description format of... | |
| Untitled DocumentISO/IEC 14762:2009(E) specifies the general functional safetyrequirements for HBES following the principles of the basic standardfor functional safety IEC 61508. This International Standard setsthe requirements for functional safety for... | |
| Untitled DocumentISO/IEC 14776-114:2009(E) defines a reference model that specifies common behaviours for SCSI devices and an abstract structure that is generic to all SCSI I/O system implementations. This standard specifies... | |
| Untitled DocumentISO/IEC 14776-223:2008(E) describes the protocol for transmitting SCSI commands, data and status using Fibre Channel FC-FS-2 Exchanges and Information Units. It defines how the Fibre Channel services and the... | |
| Untitled DocumentThe SCSI command set provides efficient peer-to-peer operation of input/output devices (disks, tapes, printers, etc.) by an operating system. This International Standard defines the command set extensions to facilitate... | |
| Untitled DocumentThe SCSI command set provides efficient peer-to-peer operation of input/output devices (disks, tapes, printers, etc.) by an operating system. This International Standard defines the SCSI commands and model for... | |
| Untitled DocumentThe Small Computer System Interface (SCSI) protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width... | |
| Untitled DocumentThe Small Computer System Interface (SCSI) protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number ofhosts and peripherals determined by the bus width (8... | |
| Untitled DocumentThe Small Computer System Interface (SCSI) protocol provides an efficient peer-to-peer I/O bus with the maximuim number of hosts and peripherals determined by the bus width (8 or 16). | |
| Untitled DocumentUpdates have been introduced to correspond to ISO/IEC 11801:2002 and other new editions of International Standards. | |
| Updates have been introduced to correspond to ISO/IEC 11801:2002 and other new editions of International Standards. | |
| Will provide users of voice messaging systems with a consistent mode of interaction in a way that is independent of the underlying system implementations. The interface is based on a... | |
| Within systems and software engineering, Computer-Aided Software Engineering (CASE) tools represent a major part of the supporting technologies used to develop and maintain information technology systems. Their selection must be... |
| << Prev | Next >> |