Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
620
630
640
650
660
670
673
674
675
676
677
678
679
680
681
682
683
684
685
690
700
710
720
730
740
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) | |
| Acoustics - Measurement of the in situ sound attenuation of a removable screen | |
| Acoustics - Measurements on silencers in situ | |
| Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code | |
| Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment | |
| Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design | |
| Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies | |
| Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures | |
| Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms | |
| Acoustics - Sound absorbers for use in buildings - Rating of sound absorption | |
| Acoustics \x96 Determination of sound immission from sound sources placed close to the ear \x96 Part 2: Technique using a manikin | |
| Acoustics \x96 Determination of sound insulation performance of cabins \x96 Laboratory and in situ measurements | |
| Acoustics \x96 Determination of sound insulation performances of enclosures \x96 Part 1: Measurements under laboratory conditions (for declaration purposes) | |
| Acoustics \x96 Determination of sound insulation performances of enclosures \x96 Part 2: Measurements in situ (for acceptance and verification purposes) | |
| Acoustics \x96 Measurement of insertion loss of ducted silencers without flow \x96 Laboratory survey method | |
| Acoustics \x96 Measurement of the influence of road surfaces on traffic noise \x96 Part 1: Statistical Pass-By method | |
| Acoustics \x96 Measurement of the influence of road surfaces on traffic noise \x96 Part 2: The close-proximity method (ISO 11819-2:2017) | |
| Acoustics \x96 Recommended practice for the design of low-noise machinery and equipment \x96 Part 1: Planning | |
| Adhesives \x96 Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions \x96 Wedge impact method | |
| Adhesives \x96 T-peel test for flexible-to-flexible bonded assemblies | |
| Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability | |
| Agricultural and forestry machinery \x96 Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers \x96 Part 1: Machines fitted with an integral combustion engine | |
| Agricultural and forestry machinery \x96 Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers \x96 Part 2: Machines for use with back-pack power unit | |
| Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution | |
| Air quality - Determination of time-averaged mass emissions and emission factors - General approach | |
| Aircraft ground equipment \x96 Graphical symbols (ISO 11532:2018) | |
| Aluminium pigments for paints \x96 Part 1: General aluminium pigments (ISO 1247-1:2021) | |
| Aluminium pigments for paints \x96 Part 2: Vacuum metallized aluminium pigments (ISO 1247-2:2021) | |
| Animal and vegetable fats and oils - Determination of lead by direct graphite furnace atomic absorption spectroscopy | |
| Animal and vegetable fats and oils \x96 Enzymatic determination of total sterols content (ISO 11702:2016) | |
| Animal feeding stuffs, cereals and milled cereal products \x96 Guidelines for the application of near infrared spectrometry | |
| Assistive products for walking manipulated by one arm \x96 Requirements and test methods \x96 Part 1: Elbow crutches | |
| Binders for paints and varnishes - Amino resins - General methods of test | |
| Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test | |
| Binders for paints and varnishes - Polyisocyanate resins - General methods of test | |
| Building construction - Jointing products - Classification and requirements for sealants | |
| Building construction - Sealants - Determination of resistance to compression | |
| Building construction \x96 Jointing products \x96 Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass | |
| Building construction \x96 Organization of information about construction works \x96 Part 2: Framework for classification (ISO 12006-2:2015) | |
| Building construction \x96 Organization of information about construction works \x96 Part 3: Framework for object-oriented information (ISO 12006-3:2007) | |
| Building environment design \x96 Design , dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 5: Installation (ISO 11855-5:2012) | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012) | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012) | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 3: Design and dimensioning (ISO 11855-3:2012) | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of... | |
| Building environment design \x96 Design, dimensioning, installation and control of embedded radiant heating and cooling systems \x96 Part 8: Electrical heating systems (ISO 11855-8:2023) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 3: Design and dimensioning \x96 Amendment 1 (ISO 11855-3:2021/Amd 1:2023) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) \x96... | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 5: Installation \x96 Amendment 1 (ISO 11855-5:2021/Amd 1:2023) | |
| Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements | |
| Cathodic protection of steel in concrete (ISO 12696:2016) | |
| Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method | |
| Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)... | |
| Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping... | |
| Colorimetry \x96 Part 1: CIE standard colorimetric observers | |
| Colorimetry \x96 Part 2: CIE standard illuminants | |
| Colorimetry \x96 Part 3: CIE tristimulus values | |
| Colorimetry \x96 Part 4: CIE 1976 L*a*b* Colour space | |
| Colorimetry \x96 Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram | |
| Colorimetry \x96 Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014) | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with... | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only... | |
| Connections for general use and fluid power \x96 Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing \x96 Part 2: Heavy-duty (S series) and light-duty (L... | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity | |
| Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing | |
| Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens | |
| Corrosion of metals and alloys - Corrosion tests in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) | |
| Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys | |
| Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) | |
| Corrosion of metals and alloys \x96 Corrosion fatigue testing \x96 Part 2: Crack propagation testing using precracked specimens \x96 Amendment 1 (ISO 11782-2:1998/Amd 1:2024) | |
| Corrosion of metals and alloys \x96 Evaluation of pitting corrosion | |
| Cosmetics \x96 Microbiology \x96 Evaluation of the antimicrobial protection of a cosmetic product \x96 Amendment 1 (ISO 11930:2019/Amd 1:2022) | |
| Cosmetics \x96 Microbiology \x96 Evaluation of the antimicrobial protection of a cosmetic product | |
| Crude petroleum, petroleum products and related products \x96 Determination of density \x96 Laboratory density meter with an oscillating U tube sensor (ISO 12185:2024) | |
| Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy | |
| Dentistry - Implants - Clinical performance of hand torque instruments | |
| Dentistry - Single-use cartridges for local anaesthetics | |
| Dentistry \x96 Dentifrices \x96 Requirements, test methods and marking | |
| Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils | |
| Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils | |
| Determination of platinum in platinum jewellery alloys \x96 Gravimetric method after reduction with mercury(I) chloride | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation \x96 Fundamentals and application \x96 Part 1: Elementary applications (ISO... | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation \x96 Fundamentals and application \x96 Part 3: Applications to unfolding... | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation \x96 Fundamentals and application \x96 Part 4: Guidelines to applications... | |
| Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation \x96 Fundamentals and application \x96 Part 2: Advanced applications (ISO... | |
| Diesel fuel \x96 Assessment of lubricity using the high-frequency reciprocating rig (HFRR) \x96 Part 1: Test method | |
| Electronic fee collection \x96 Compliance check communication for autonomous systems \x96 Amendment 1 (ISO 12813:2015/Amd 1:2017) | |
| Electronic fee collection \x96 Compliance check communication for autonomous systems | |
| Electronic fee collection \x96 Information exchange between service provision and toll charging | |
| Ergonomics of the thermal environment - Principles and application of relevant International Standards | |
| Eye and face protection \x96 Sunglasses and related eyewear \x96 Part 1: Sunglasses for general use (ISO 12312-1:2022) | |
| Eye and face protection \x96 Sunglasses and related eyewear \x96 Part 1: Sunglasses for general use | |
| Eye and face protection \x96 Sunglasses and related eyewear \x96 Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) | |
| Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications \x96 Part 1: Specification for products (ISO 12609-1:2021) | |
| Fans \x96 Efficiency classification for fans \x96 Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019) | |
| Fans \x96 Efficiency classification for fans \x96 Part 5: Jet fans (ISO 12759-5:2021) | |
| Fans \x96 Efficiency classification for fans | |
| Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes | |
| Fibre ropes \x96 Polyamide \x96 3-, 4-, 8- and 12-strand ropes | |
| Fibre ropes \x96 Polyester \x96 3-, 4-, 8- and 12-strand ropes | |
| Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods | |
| Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics | |
| Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs Determination of flowability, maturation and shelf life | |
| Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection | |
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | |
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air | |
| Gas cylinders - Procedures for change of gas service | |
| Gas cylinders \x96 17E and 25E taper threads for connection of valves to gas cylinders \x96 Part 1: Specifications \x96 Amendment 1 (ISO 11363-1:2018/Amd 1:2023) | |
| Gas cylinders \x96 17E and 25E taper threads for connection of valves to gas cylinders \x96 Part 1: Specifications | |
| Gas cylinders \x96 17E and 25E taper threads for connection of valves to gas cylinders \x96 Part 2: Inspection gauges | |
| Gas cylinders \x96 Composite construction \x96 Periodic inspection and testing | |
| Gas cylinders \x96 Cylinder bundles for compressed and liquefied gases (excluding acetylene) \x96 Inspection at time of filling (ISO 11755:2005) | |
| Gas cylinders \x96 High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles \x96 Amendment 1 (ISO 11439:2013/Amd 1:2021) | |
| Gas cylinders \x96 Outlet connections for gas cylinder valves for compressed breathable air \x96 Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd... | |
| Geometrical product specification (GPS) \x96 Surface texture: Profile method \x96 Motif parameters | |
| Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form | |
| Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness | |
| Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness | |
| Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness | |
| Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile method \x96 Calibration of contact (stylus) instruments | |
| Geosynthetics - Static puncture test (CBR test) | |
| Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts | |
| Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 2: Laminated safety glass | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 3: Laminated glass | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 5: Dimensions and edge finishing | |
| Glass in building \x96 Laminated glass and laminated safety glass \x96 Part 6: Appearance | |
| Glass packaging - Standard tolerances for flaconnage | |
| Glass packaging \x96 26 H 126 crown finish \x96 Dimensions (ISO 12822:2020) | |
| Glass packaging \x96 26 H 180 crown finish \x96 Dimensions | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 1: General requirements (ISO 12643-1:2023) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 2: Prepress and press equipment and systems (ISO 12643-2:2023) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 3: Binding and finishing equipment and systems (ISO 12643-3:2023) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 4: Converting equipment and systems (ISO 12643-4:2023) | |
| Graphic technology \x96 Safety requirements for graphic technology equipment and systems \x96 Part 5: Manually-fed stand-alone platen presses (ISO 12643-5:2023) | |
| Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method | |
| Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management | |
| Health informatics \x96 Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019) | |
| Health informatics \x96 Identification of medicinal products \x96 Data elements and structures for the unique identification and exchange of regulated medicinal product information \x96 Amendment 1 (ISO 11615:2017/Amd 1:2022) | |
| Health informatics \x96 Identification of medicinal products \x96 Data elements and structures for the unique identification and exchange of regulated medicinal product information | |
| Health informatics \x96 Identification of medicinal products \x96 Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information | |
| Hexagon socket head cap screws with metric fine pitch thread | |
| Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 1 | |
| Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature | |
| Hygrothermal performance of building materials and products \x96 Determination of hygroscopic sorption properties | |
| Hygrothermal performance of building materials and products \x96 Determination of moisture content by drying at elevated temperature (ISO 12570:2000/Amd 2:2018) | |
| Hygrothermal performance of building materials and products \x96 Determination of water vapour transmission properties \x96 Cup method \x96 Amendment 1 (ISO 12572:2016/Amd 1:2024) | |
| Hygrothermal performance of building materials and products \x96 Determination of water vapour transmission properties | |
| Industrial fans - Mechanical safety of fans - Guarding | |
| Integrated optics - Vocabulary - Part 1: Basic terms and symbols | |
| Integrated optics - Vocabulary - Part 2: Terms used in classification | |
| Iron oxide pigments - Specifications and methods of test | |
| Jewellery \x96 Determination of gold in gold jewellery alloys \x96 Cupellation method (fire assay) (ISO 11426:2014) | |
| Jewellery \x96 Determination of palladium in palladium jewellery alloys \x96 Gravimetric determination with dimethylglyoxime (ISO 11490:2015) | |
| Jewellery \x96 Determination of palladium in palladium jewellery alloys \x96 ICP-OES method using yttrium as internal standard element (ISO 11495:2014) | |
| Jewellery \x96 Determination of platinum in platinum jewellery alloys \x96 ICP-OES method using yttrium as internal standard element (ISO 11494:2014) | |
| Jewellery and precious metals \x96 Determination of silver \x96 Potentiometry using potassium bromide (ISO 11427:2024) | |
| Lactose - Determination of water content - Karl Fischer method | |
| Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft | |
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition | |
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability | |
| Lasers and laser-related equipment \x96 Determination of laser resistance of tracheal tube shaft and tracheal cuffs (ISO 11990:2018) | |
| Lasers and laser-related equipment \x96 Determination of laser resistance of tracheal tubes \x96 Part 2: Tracheal tube cuffs | |
| Lasers and laser-related equipment \x96 Test methods for laser beam parameters \x96 Polarization | |
| Leather - Measurement of area | |
| Leather - Test for adhesion of finish | |
| Leather - Tests for colour fastness - Colour fastness of small samples to solvents | |
| Leather - Tests for colour fastness - Colour fastness to perspiration | |
| Leather - Tests for colour fastness - Colour fastness to water | |
| Leather \x96 Determination of total content of certain bisphenols (ISO 11936:2023) | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to cycles of to-and-fro rubbing | |
| Machinery for forestry \x96 General safety requirements \x96 Amendment 2: Access to operator's station and maintenance locations (ISO 11850:2011/Amd 2:2022) | |
| Machinery for forestry \x96 General safety requirements | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 1: Chain-saws for forest service | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017) | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 2: Chain-saws for tree service | |
| Machinery for forestry \x96 Safety requirements and testing for pole-mounted powered pruners \x96 Part 1: Machines fitted with an integral combustion engine | |
| Machinery for forestry \x96 Safety requirements and testing for pole-mounted powered pruners \x96 Part 2: Machines for use with back-pack power source | |
| Measurement of radioactivity in the environment - Air: radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products | |
| Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement method of the activity concentration | |
| Measurement of radioactivity in the environment - Air: radon-222 - Part 7: Accumulation method for estimating surface exhalation rate | |
| Measurement of radioactivity in the environment -Air: radon-222 - Part 5: Continuous measurement method of the activity concentration | |
| Measurement of radioactivity in the environment \x96 Air: radon-222 \x96 Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016) | |
| Measurement of radioactivity in the environment \x96 Air: radon-222 \x96 Part 1: Origins of radon and its short-lived decay products and associated measurement methods | |
| Measurement of radioactivity in the environment \x96 Air: radon-222 \x96 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products | |
| Mechanically deposited coatings of zinc - Specification and test methods | |
| Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities | |
| Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test | |
| Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop | |
| Metallic materials \x96 Sheet and strip \x96 Determination of forming-limit curves \x96 Part 2: Determination of forming-limit curves in the laboratory | |
| Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples | |
| Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples | |
| Methods of test for pallet joints - Part 3: Determination of strength of pallet joints | |
| Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration | |
| Milk - Determination of fat content - Gravimetric method (Reference method) | |
| Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks | |
| Milk and milk products \x96 Determination of alkaline phosphatase activity \x96 Part 2: Fluorimetric method for cheese | |
| Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry | |
| Molecular biomarker analysis \x96 Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods (ISO 11781:2025) | |
| Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines | |
| Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis | |
| Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties | |
| Natural gas - Determination of water content at high pressure | |
| Needle-based injection systems for medical use \x96 Requirements and test methods \x96 Part 2: Needles | |
| Needle-based injection systems for medical use \x96 Requirements and test methods \x96 Part 3: Finished containers | |
| Needle-based injection systems for medical use \x96 Requirements and test methods \x96 Part 5: Automated functions (ISO 11608-5:2022) | |
| Needle-based injection systems for medical use \x96 Requirements and test methods \x96 Part 7: Accessibility for persons with visual impairment (ISO 11608-7:2016) | |
| Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography | |
| Non-destructive testing - Magnetic particle testing - Vocabulary | |
| Non-destructive testing - Penetrant testing - Vocabulary | |
| Non-destructive testing \x96 Eddy current testing \x96 Vocabulary | |
| Non-destructive testing \x96 Industrial radiographic films \x96 Part 2: Control of film processing by means of reference values | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Acceptance levels | |
| Nuclear energy \x96 Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets \x96 Inert gas extraction and conductivity detection method (ISO 12799:2015) | |
| Nuclear fuel technology \x96 Controlled-potential coulometric assay of plutonium (ISO 12183:2016) | |
| Nuclear fuel technology \x96 Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 1: Validation of materials and insulation systems (ISO 12736-1:2023) | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 2: Qualification processes for production and application procedures (ISO 12736-2:2023)... | |
| Oil and gas industries including lower carbon energy \x96 Wet thermal insulation systems for pipelines and subsea equipment \x96 Part 3: Interfaces between systems, field joint system, field repairs and... | |
| Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods | |
| Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information - Amendment 1 | |
| Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information | |
| Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability testing | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 10: Phakic intraocular lenses | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 1: Vocabulary | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 2: Optical properties and test methods | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 5: Biocompatibility | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO 11979-7:2024) | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 8: Fundamental requirements | |
| Ophthalmic implants \x96 Intraocular lenses \x96 Part 9: Multifocal intraocular lenses | |
| Ophthalmic optics - Contact lenses - Determination of shelf-life | |
| Ophthalmic optics - Contact lenses and contact lens care products - Labelling | |
| Ophthalmic optics \x96 Contact lenses and contact lens care products \x96 Determination of physical compatibility of contact lens care products with contact lenses | |
| Ophthalmic optics \x96 Contact lenses and contact lens care products \x96 Determination of preservative uptake and release | |
| Ophthalmic optics \x96 Contact lenses and contact lens care products \x96 Guidance for clinical investigations | |
| Ophthalmic optics \x96 Contact lenses and contact lens care products \x96 Labelling \x96 Amendment 1 (ISO 11978:2017/Amd 1:2020) | |
| Ophthalmic optics \x96 Spectacle frames \x96 Screw threads | |
| Optics and optical instruments - Ophthalmic optics - Formers | |
| Optics and optical instruments \x96 Lasers and laser-related equipment \x96 Test method for absorptance of optical laser components | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Test methods for laser beam radiant power, radiant energy and temporal characteristics (ISO 11554:2025) | |
| Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester | |
| Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds | |
| Packaging - Tactile warnings of danger - Requirements | |
| Packaging for terminally sterilized medical devices \x96 Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019) | |
| Packaging for terminally sterilized medical devices \x96 Part 1: Requirements for materials, sterile barrier systems and packaging systems | |
| Packaging for terminally sterilized medical devices \x96 Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019) | |
| Packaging for terminally sterilized medical devices \x96 Part 2: Validation requirements for forming, sealing and assembly processes | |
| Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation | |
| Paints and varnishes - Determination of mar resistance | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light | |
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings | |
| Paints and varnishes \x96 Determination of resistance to cyclic corrosion conditions \x96 Part 1: Wet (salt fog)/dry/humidity | |
| Paints and varnishes \x96 Determination of resistance to cyclic corrosion conditions \x96 Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022) | |
| Paints and varnishes \x96 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content \x96 Part 1: Gravimetric method for VOC determination (ISO 11890-1:2024) | |
| Paints and varnishes \x96 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content \x96 Part 2: Gas-chromatographic method (ISO 11890-2:2020) | |
| Paints and varnishes \x96 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content \x96 Part 2: Gas-chromatographic method \x96 Amendment 1 (ISO 11890-2:2020/Amd 1:2024) | |
| Pen-injectors for medical use - Part 1: Pen-injectors - Requirements and test methods | |
| Pen-injectors for medical use \x96 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors | |
| Personal flotation devices \x96 Part 10: Selection and application of personal flotation devices and other relevant devices | |
| Personal flotation devices \x96 Part 2: Lifejackets, performance level 275 \x96 Safety requirements | |
| Personal flotation devices \x96 Part 3: Lifejackets, performance level 150 \x96 Safety requirements | |
| Personal flotation devices \x96 Part 4: Lifejackets, performance level 100 \x96 Safety requirements | |
| Personal flotation devices \x96 Part 5: Buoyancy aids (level 50) \x96 Safety requirements | |
| Personal flotation devices \x96 Part 6: Special purpose lifejackets and buoyancy aids \x96 Safety requirements and additional test methods | |
| Personal flotation devices \x96 Part 7: Materials and components \x96 Safety requirements and test methods | |
| Personal flotation devices \x96 Part 8: Accessories \x96 Safety requirements and test methods | |
| Personal flotation devices \x96 Part 9: Test methods | |
| Personal protective equipment - Test methods for sunglasses and related eyewear | |
| Petroleum and natural gas industries \x96 Steel drill pipe \x96 Amendment 1 (ISO 11961:2018/Amd 1:2020) | |
| Petroleum and natural gas industries \x96 Steel drill pipe | |
| Petroleum and natural gas industries \x96 Steel pipes for use as casing or tubing for wells | |
| Petroleum and natural gas industries \x96 Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures | |
| Petroleum products - Determination of the oxidation stability of middle-distillate fuels | |
| Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers | |
| Petroleum, petrochemical and natural gas industries - Spiral plate heat exchangers | |
| Phenolic, amino and condensation resins - Determination of free-formaldehyde content | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture | |
| Plastics - Film and sheeting - Determination of dimensional change on heating | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) | |
| Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method | |
| Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method | |
| Plastics - Phenol resins - Separation by liquid chromatography | |
| Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method | |
| Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodemetric method | |
| Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry | |
| Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles | |
| Plastics - Preparation of PVC pastes for test purposes - Dissolver method | |
| Plastics - Thermogravimetry (TTG) of polymers - General principles | |
| Plastics - Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm | |
| Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content | |
| Plastics \x96 Acquisition and presentation of comparable multipoint data \x96 Part 1: Mechanical properties | |
| Plastics \x96 Acquisition and presentation of comparable multipoint data \x96 Part 2: Thermal and processing properties | |
| Plastics \x96 Acquisition and presentation of comparable multipoint data \x96 Part 3: Environmental influences on properties | |
| Plastics \x96 Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics \x96 Part 1: Standard method | |
| Plastics \x96 Determination of viscosity using a falling-ball viscometer \x96 Part 1: Inclined-tube method | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 1: General principles (ISO 11357-1:2016) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 2: Determination of glass transition temperature and glass transition step height | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 3: Determination of temperature and enthalpy of melting and crystallization | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 4: Determination of specific heat capacity | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 7: Determination of crystallization kinetics | |
| Plastics \x96 Differential scanning calorimetry (DSC) \x96 Part 8: Determination of thermal conductivity (ISO 11357-8:2021) | |
| Plastics \x96 Film and sheeting \x96 Determination of blocking resistance | |
| Plastics \x96 Fluoropolymer dispersions and moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Fluoropolymer dispersions and moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Generic identification and marking of plastics products | |
| Plastics \x96 Methods for determining the density of non-cellular plastics \x96 Part 2: Density gradient column method | |
| Plastics \x96 Poly(methyl methacrylate) double- and triple-skin sheets \x96 Test methods | |
| Plastics \x96 Polyamides \x96 Determination of e-caprolactam and w-laurolactam by gas chromatography | |
| Plastics \x96 Polycarbonate sheets \x96 Types, dimensions and characteristics | |
| Plastics \x96 Thermogravimetry (TG) of polymers \x96 Part 1: General principles | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part: 2 Preparation of test specimens and determination of properties | |
| Plastics \x96 Unplasticized poly(vinyl chloride) sheets \x96 Types, dimensions and characteristics \x96 Part 1: Sheets of thickness not less than 1 mm | |
| Protective clothing - Clothing to protect against heat and flame | |
| Protective clothing \x96 Vocabulary (ISO 11610:2023) | |
| Protective clothing for use in welding and allied processes | |
| Protective clothing for users of hand-held chainsaws \x96 Part 1: Test rig for testing resistance to cutting by a chainsaw (ISO 11393-1:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 3: Test methods for footwear (ISO 11393-3:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) | |
| Protective clothing for users of hand-held chainsaws \x96 Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) | |
| Quality of dialysis fluid for haemodialysis and related therapies | |
| Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test | |
| Reaction to fire tests \x96 Ignitability of products subjected to direct impingement of flame \x96 Part 2: Single-flame source test | |
| Reaction to fire tests for products \x96 Non-combustibility test | |
| Refractory products - Determination of resistance to carbon monoxide | |
| Resilient floor coverings \x96 Heterogeneous poly(vinyl chloride) flooring on foam \x96 Specification (ISO 11638:2020, including corrected version 2021-09) | |
| Rice - Determination of rice kernel resistance to extrusion after cooking | |
| Rice \x96 Determination of biometric characteristics of kernels \x96 Amendment 1 (ISO 11746:2012/Amd 1:2017) | |
| Rice \x96 Determination of biometric characteristics of kernels | |
| Rice \x96 Determination of rice kernel resistance to extrusion after cooking \x96 Amendment 1 (ISO 11747:2012/Amd 1:2017) | |
| Road vehicles \x96 Liquefied natural gas (LNG) refuelling connector \x96 3,1 MPa connector (ISO 12617:2015) | |
| Safe transport of radioactive materials \x96 Leakage testing on packages (ISO 12807:2018) | |
| Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology | |
| Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles | |
| Safety of machinery - General principles for design - Risk assessment and risk reduction | |
| Safety of machinery \x96 Laser processing machines \x96 Part 1: General safety requirements | |
| Safety of machinery \x96 Laser processing machines \x96 Part 1: Laser safety requirements (ISO 11553-1:2020) | |
| Safety of machinery \x96 Laser processing machines \x96 Part 2: Safety requirements for hand-held laser processing devices | |
| Safety of machinery \x96 Laser processing machines \x96 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade... | |
| Ships and marine technology \x96 Marine electromagnetic compasses | |
| Slotted cheese head screws - Product grade A | |
| Small craft \x96 Deck safety harness and safety line \x96 Safety requirements and test methods | |
| Small craft \x96 Determination of maximum propulsion power rating using manoeuvring speed \x96 Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) | |
| Small craft \x96 Determination of maximum propulsion power rating using manoeuvring speed \x96 Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021) | |
| Small craft \x96 Field of vision from the steering position \x96 Amendment 1 (ISO 11591:2020/Amd 1:2022) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 10: Rig loads and rig attachment in sailing craft (ISO 12215-10:2020) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate | |
| Small craft \x96 Hull construction and scantlings \x96 Part 2: Materials: Core materials for sandwich construction, embedded materials | |
| Small craft \x96 Hull construction and scantlings \x96 Part 3: Materials: Steel, aluminium alloys, wood, other materials | |
| Small craft \x96 Hull construction and scantlings \x96 Part 4: Workshop and manufacturing | |
| Small craft \x96 Hull construction and scantlings \x96 Part 5: Design pressures for monohulls, design stresses, scantlings determination | |
| Small craft \x96 Hull construction and scantlings \x96 Part 6: Structural arrangements and details | |
| Small craft \x96 Hull construction and scantlings \x96 Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 (ISO 12215-7:2020) | |
| Small craft \x96 Hull construction and scantlings \x96 Part 8: Rudders | |
| Small craft \x96 Hull construction and scantlings \x96 Part 9: Sailing craft appendages | |
| Small craft \x96 Stability and buoyancy assessment and categorization \x96 Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) | |
| Small craft \x96 Stability and buoyancy assessment and categorization \x96 Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) | |
| Small craft \x96 Stability and buoyancy assessment and categorization \x96 Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) | |
| Small craft \x96 Start-in-gear protection | |
| Small craft \x96 Watertight or quick-draining recesses and cockpits (ISO 11812:2020) | |
| Small craft \x96 Watertight or quick-draining recesses and cockpits \x96 Amendment 1 (ISO 11812:2020/Amd 1:2024) | |
| Small craft \x96 Windows, portlights, hatches, deadlights and doors \x96 Strength and watertightness requirements (ISO 12216:2020) | |
| Small craft \x96 Windows, portlights, hatches, deadlights and doors \x96 Strength and watertightness requirements | |
| Small craft, engine-driven \x96 Field of vision from helm position | |
| Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid... | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid... | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples | |
| Soil quality \x96 Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO 11504:2017) | |
| Soil quality \x96 Determination of particle density | |
| Soil quality \x96 Determination of selected explosives and related compounds \x96 Part 3: Method using liquid chromatography-tande m mass spectrometry (LC-MS/MS) (ISO 11916-3:2021) | |
| Soil quality \x96 Guidance on the selection and application of screening methods | |
| Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements | |
| Solder wire, solid and flux cored - Specifications and test methods - Part 3: Wetting balance test method for flux cored solder wire efficacy | |
| Solder wire, solid and flux-cored \x96 Specification and test methods \x96 Part 2: Determination of flux content (ISO 12224-2:2024) | |
| Specification and qualification of welding procedures for production welding of steel castings | |
| Split pins | |
| Steel and iron \x96 Determination of cobalt content \x96 Flame atomic absorption spectrometric method (ISO 11652:1997) | |
| Sterilization of health care products \x96 Microbiological methods \x96 Part 1: Determination of a population of microorganisms on products \x96 Amendment 1 (ISO 11737-1:2018/Amd 1:2021) | |
| Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process | |
| Sterilization of medical devices \x96 Microbiological methods \x96 Part 1: Determination of a population of microorganisms on products | |
| Technical drawings - General principles of presentation - Part 20: Basic conventions for lines | |
| Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD-systems | |
| Technical product documentation (TPD) \x96 General principles of representation \x96 Part 1: Introduction and fundamental requirements (ISO 128-1:2020) | |
| Technical product documentation - Document management | |
| Technical product documentation \x96 General principles of representation \x96 Part 100: Index (ISO 128-100:2020) | |
| Technical product documentation \x96 General principles of representation \x96 Part 2: Basic conventions for lines (ISO 128-2:2020) | |
| Technical product documentation \x96 General principles of representation \x96 Part 3: Views, sections and cuts (ISO 128-3:2020) | |
| Textile floor coverings - Determination of resistance to delamination | |
| Textile floor coverings - Laboratory soiling tests - Part 2: Drum test | |
| Textile floor coverings \x96 Laboratory soiling tests \x96 Part 2: Drum test \x96 Amendment 1 (ISO 11378-2:2001/Amd 1:2017) | |
| Textile-glass-reinfo rced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods | |
| Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing | |
| Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish | |
| Textiles \x96 Domestic laundering procedures for textile fabrics prior to flammability testing | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of dimensions, squareness and linearity of preformed pipe insulation (ISO 12628:2022) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of dimensions, squareness and linearity of preformed pipe insulation \x96 Amendment 1 (ISO 12628:2022/Amd 1:2025) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of water vapour transmission properties of preformed pipe insulation (ISO 12629:2022) | |
| Thermal insulation for building equipment and industrial installations \x96 Calculation rules | |
| Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method | |
| Thermal performance of curtain walling \x96 Calculation of thermal transmittance | |
| Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows | |
| Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors | |
| Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions | |
| Thermal spraying - Recommendations for thermal spraying | |
| Thermal spraying \x96 Thermally sprayed coatings \x96 Symbolic representation on drawings | |
| Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies | |
| Tissue paper and tissue products - Part 11: Determination of wet ball burst strength | |
| Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk | |
| Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method | |
| Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) | |
| Tissue paper and tissue products \x96 Part 12: Determination of tensile strength of perforated lines \x96 Calculation of perforation efficiency | |
| Tissue paper and tissue products \x96 Part 15: Determination of optical properties \x96 Measurement of brightness and colour with C/2\xb0 (indoor daylight) illuminant | |
| Tissue paper and tissue products \x96 Part 16: Determination of optical properties \x96 Diffuse reflectance method for opacity (paper backing) (ISO 12625-16:2024) | |
| Tissue paper and tissue products \x96 Part 17: Determination of disintegration in water (ISO 12625-17:2021) | |
| Tissue paper and tissue products \x96 Part 1: General guidance on terms | |
| Tissue paper and tissue products \x96 Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) | |
| Tissue paper and tissue products \x96 Part 5: Determination of wet tensile strength (ISO 12625-5:2024) | |
| Tissue paper and tissue products \x96 Part 6: Determination of grammage (ISO 12625-6:2016) | |
| Tissue paper and tissue products \x96 Part 7: Determination of optical properties \x96 Measurement of brightness and colour with D65/10\xb0 (outdoor daylight) | |
| Transfusion equipment for medical use - Part 4: Transfusion sets for single use | |
| Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus | |
| Transfusion equipment for medical use \x96 Part 3: Bloodtaking sets for single use (ISO 1135-3:2016) | |
| Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector | |
| Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs | |
| Water quality - Determination of aluminium - Atomic absorption spectrometric methods | |
| Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection | |
| Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment | |
| Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate | |
| Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction | |
| Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004) | |
| Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria | |
| Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria | |
| Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria | |
| Water quality - Evaluation of the "ultimate" anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production | |
| Water quality \x96 Detection and enumeration of Legionella \x96 Part 2: Direct membrane filtration method for waters with low bacterial counts | |
| Water quality \x96 Determination of short-chain polychlorinated alkanes (SCCPs) in water \x96 Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) | |
| Water quality \x96 Measurement of gross alpha and beta activity concentration in non-saline water \x96 Liquid scintillation counting method (ISO 11704:2010) | |
| Welding consumables \x96 Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys \x96 Classification | |
| Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method (ISO 12460-4:2016) | |
| Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) | |
| Wood-based panels \x96 Determination of formaldehyde release \x96 Part 2: Small-scale chamber method (ISO 12460-2:2024) | |
| Wood-based panels \x96 Determination of formaldehyde release \x96 Part 3: Gas analysis method |
| << Prev | Next >> |