Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
250
300
350
400
450
500
520
530
540
550
560
570
574
575
576
577
578
579
580
581
582
583
584
585
586
590
600
610
620
630
640
650
700
750
800
850
900
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abscheideranlagen fuer Leichtfluessigkeiten (z. B. Oel und Benzin) - Teil 1: Bau-, Funktions- und Pruefgrundsaetze, Kennzeichnung und Gueteueberwachung; Deutsche Fassung EN 858-1:2002 + A1:2004 | |
| Abscheideranlagen fuer Leichtfluessigkeiten (z. B. Oel und Benzin) - Teil 2: Wahl der Nenngroesse, Einbau, Betrieb und Wartung; Deutsche Fassung EN 858-2:2003 | |
| Abscheideranlagen fuer Leichtfluessigkeiten (z.B. Oel und Benzin); Teil 1: Bau-, Funktions- und Pruefgrundsaetze, Kennzeichnung und Gueteueberwachung; Deutsche Fassung prEN 858-1:1992 | |
| Adhesives - Determination of conventional solids content and constant mass solids content | |
| Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surfaces | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests | |
| Advanced technical ceramics - Methods of test for ceramic powders - Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination on natural sintering | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia; English version of DIN EN 725-12 | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density | |
| Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density | |
| Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching | |
| Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity | |
| Advanced technical ceramics - Monolithic ceramics - Thermomechanical properties - Part 2: Determination of self-loaded deformation | |
| Advanced technical ceramics - Monolithic ceramics; Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures | |
| Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures | |
| Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures | |
| Aeropace series - Quality systems - First article inspection; German and English version EN 9102:2006 | |
| Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Regist rations Programs; German and English version EN 9104-002:2008 | |
| Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification; German and English version EN 9104-003:2009 | |
| Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication; German and English version EN 9104-3:2023 | |
| Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Regist rations Programs; German and English version EN 9104:2006 | |
| Aerospace series - Quality management systems - Variation management of key characteristics; German and English version EN 9103:2005 | |
| Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009) | |
| Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009) | |
| Agricultural machinery - Manure spreaders - Safety (includes Amendment A1:2009) | |
| Agricultural machinery - Rotary mowers and flail-mowers - Safety (includes Amendment A1:2009) | |
| Agricultural machinery - Slurry tankers - Safety (includes Amendment A1:2009) | |
| Agricultural machinery - Vine shoot tipping machines - Safety (includes Amendment A1:2009) | |
| Aluminium and aluminium alloy circle and circle stock for the production of culinary utensils - Specifications | |
| Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Hexagonal bars: tolerances on dimensions and form | |
| Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Square bars: tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties; German and English version prEN 755-2:2023 | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form | |
| Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 3: Rundstangen, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-3:2008 | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 4: Vierkantstangen, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-4:2008 | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 5: Rechteckstangen, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-5:2008 | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 6: Sechskantstangen, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-6:2008 | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 7: Nahtlose Rohre, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-7:2008 | |
| Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 8: Mit Kammerwerkzeug stranggepresste Rohre, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 754-8:2008 | |
| Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 1: Technische Lieferbedingungen; Deutsche Fassung EN 755-1:2008 | |
| Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften; Deutsche Fassung EN 755-2:2008, Berichtigung zu DIN EN 755-2:2008-06 | |
| Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 8: Mit Kammerwerkzeug stranggepresste Rohre, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 755-8:2008, Berichtigung zu DIN EN 755-8:2008-06 | |
| Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 9: Profile, Grenzabmasse und Formtoleranzen; Deutsche Fassung EN 755-9:2008, Berichtigung zu DIN EN 755-9:2008-06 | |
| Aluminium und Aluminiumlegierungen - Vormaterial fuer Waermeaustauscher (Finstock) - Teil 2: Mechanische Eigenschaften; Deutsche Fassung EN 683-2:2006 | |
| Armaturen - Terminologie - Teil 3: Definition von Begriffen; Deutsche Fassung EN 736-3:2008 | |
| Automatische Brenner mit Geblaese fuer gasfoermige Brennstoffe; Deutsche Fassung EN 676:2003+A2:2008 | |
| Bar coding - Format description for symbology specifications | |
| Bar coding - Symbology specifications: 'EAN/UPC' | |
| Ceramic floor and wall tiles; definitions, classification, characteristics and marking; german version EN 87:1991 | |
| Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) | |
| Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate | |
| Chemicals used for treatment of water intended for human consumption - Aluminium sulfate | |
| Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate; German and English version prEN 889:2025 | |
| Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) chloride | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate liquid | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxyde and polyaluminium chloride hydroxyde sulfate | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate | |
| Chemicals used for treatment of water intended for human consumption - Sodium aluminate | |
| Chemicals used for treatment of water intended for human consumption - Sodium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydroxide | |
| Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite | |
| Chemicals used for treatment of water intended for human consumption - Sulfuric acid | |
| Children's cots and folding cots for domestic use - Safety requirements | |
| Children's cots and folding cots for domestic use - Test methods | |
| Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials; English version of DIN EN 741 | |
| Corrigendum to DIN EN 671-1:2001-08 (EN 671-1:2001/AC:2002) | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures; German and English version EN 74-1:2022/prA1:2024 | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures | |
| Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures | |
| Covered electrodes for manual metal arc welding of high strength steels - Classification | |
| Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997 | |
| Destructive testing of welds in metallic materials - Transverse tensile test | |
| Determination of the compressive strength of autoclaved aerated concrete | |
| Determination of the dry density of autoclaved aerated concrete | |
| Determination of the drying shrinkage of autoclaved aerated concrete | |
| Dichtmittel fuer metallene Gewindeverbindungen in Kontakt mit Gasen der 1., 2. und 3. Familie und Heisswasser - Teil 2: Nichtaushaertende Dichtmittel; Deutsche Fassung EN 751-2:1996 | |
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products... | |
| Drain and sewer systems outside buildings - Sewer system management; German and English version EN 752:2017/prA1:2025 | |
| Drill rigs - Safety (includes Amendment A1:2009) | |
| Druckmessgeraete - Teil 3: Druckmessgeraete mit Platten- und Kapselfedern; Masse, Messtechnik, Anforderungen und Pruefung; Deutsche Fassung EN 837-3:1996 | |
| Druckregler und zugehoerige Sicherheitseinrichtu ngen fuer Gasgeraete - Teil 2: Druckregler fuer Eingangsdruecke ueber 500 mbar bis einschliesslich 5 bar; Deutsche Fassung EN 88-2:2007 | |
| Dunkelstrahlersystem e mit mehreren Brennern mit Geblaese fuer gewerbliche und industrielle Anwendung - Teil 1: System D - Sicherheit; Deutsche Fassung EN 777-1:2009 | |
| Dunkelstrahlersystem e mit mehreren Brennern mit Geblaese fuer gewerbliche und industrielle Anwendung - Teil 2: System E - Sicherheit; Deutsche Fassung EN 777-2:2009 | |
| Dunkelstrahlersystem e mit mehreren Brennern mit Geblaese fuer gewerbliche und industrielle Anwendung - Teil 4: System H - Sicherheit; Deutsche Fassung EN 777-4:2009 | |
| Elastische Bodenbelaege - Spezifikation fuer Korklinoleum; Deutsche und Englische Fassung prEN 688 | |
| Elastomer-Dichtungen ; Werkstoff-Anforderun gen fuer Rohrleitungsdichtmit tel fuer Anwendungen in der Entwaesserung und Kanalisation; Teil 3: Zellige Werkstoffe aus vulkanisiertem Gummi; Deutsche Fassung prEN 681-3:1992 | |
| Elastomer-Dichtungen ; Werkstoff-Anforderun gen fuer Rohrleitungsdichtmit tel fuer Anwendungen in der Entwaesserung und Kanalisation; Teil 4: Dichtelemente aus gegossenem Polyurethan; Deutsche Fassung prEN 681-4:1992 | |
| Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber Corrigendum 1 to English translation of DIN EN 681-1:2006 | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber | |
| Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements | |
| Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids | |
| End-load bearing joints between small diameter thermoplastics pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust | |
| Entwaesserungssystem e ausserhalb von Gebaeuden; Deutsche Fassung EN 752:2008 | |
| Festlegungen fuer Fluessiggasgeraete - Absorber-Kuehlschrae nke; Deutsche Fassung EN 732:1998 | |
| Festlegungen fuer Fluessiggasgeraete - Absorber-Kuehlschrae nke; Deutsche und Englische Fassung prEN 732:2025 | |
| Feuerwehrschutzhands chuhe; Deutsche Fassung EN 659:2003+A1:2008 | |
| Fibre ropes for general service - General specifications | |
| Fibre ropes for general service - Manila and sisal ropes | |
| Fibre ropes for general service - Polyamide ropes | |
| Fibre ropes for general service - Polyester ropes | |
| Fibre ropes for general service - Polyethylene ropes | |
| Fibre ropes for general service - Polypropylene ropes | |
| Fire-fighting hoses - Semi-rigid hoses for fixed systems (includes Corrigenda AC:2002 + AC:2003 + Amendment A1:2007) | |
| Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; English version of DIN EN 671-2 | |
| Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose | |
| Fluxes for submerged arc welding - Classification | |
| Formstabile Schlaeuche fuer Schlauchhaspeln in Feuerloesch-Schlauch einrichtungen; Deutsche Fassung prEN 694:1992 | |
| Furniture - Bunk beds and high beds for domestic use - Part 1: Safety, strength and durability requirements | |
| Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods | |
| Garden equipment - Powered lawnmowers - Safety; English version of DIN EN 836:1997/A2:2001 | |
| Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997/A1:1997 | |
| Garden equipment - Powered lawnmowers - Safety | |
| Gartengeraete - Elektrisch betriebene handgefuehrte und handgehaltene Rasentrimmer und Rasenkantentrimmer - Mechanische Sicherheit; Deutsche Fassung EN 786:1996+A2:2009 | |
| Gas welding equipment - Air-aspirated hand blowpipes - Specifications and methods of test | |
| Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor | |
| Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor | |
| Gas welding equipment - Safety devices for fuel gases and oxygen or compressed air - General specifications, requirements and methods of test | |
| Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW | |
| Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW | |
| Gasbeheizte Vorrats-Wasserheizer fuer den sanitaeren Gebrauch; Deutsche Fassung EN 89:2015 | |
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers | |
| Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000 + A2:2002) | |
| Glass in building - Determination of thermal transmittance (U value) by the guarded hot plate method | |
| Glass in building - Determination of thermal transmittance (U value) by the heat flow meter method | |
| Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions | |
| Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use | |
| Groessen und Einheiten - Teil 13: Informationswissensc haft und -technik (IEC 80000-13:2008); Deutsche Fassung EN 80000-13:2008 | |
| Groessen und Einheiten - Teil 14: Telebiometrische Identifizierung unter den Bedingungen der Physiologie des Menschen (IEC 80000-14:2008); Deutsche Fassung EN 80000-14:2009 | |
| Groessen und Einheiten - Teil 6: Elektromagnetismus (IEC 80000-6:2008); Deutsche Fassung EN 80000-6:2008 | |
| Guidance on the application of EN 29 001 and EN 46 001 and of EN 29 002 and EN 46 002 for non-active medical devices | |
| Gummischlaeuche und -schlauchleitungen - Hydraulikschlaeuche mit Drahtspiraleinlage - Spezifikation; Deutsche und Englische Fassung prEN 856:2024 | |
| Gummischlaeuche und -schlauchleitungen - Hydraulikschlaeuche mit Textileinlage - Spezifikation; Deutsche und Englische Fassung prEN 854:2024 | |
| Gummischlaeuche und -schlauchleitungen - Kompakthydraulikschl aeuche mit Drahtgeflechteinlage - Spezifikation; Deutsche Fassung EN 857:1996 | |
| Gummischlaeuche und -schlauchleitungen - Kompakthydraulikschl aeuche mit Drahtgeflechteinlage - Spezifikation; Deutsche und Englische Fassung prEN 857:2024 | |
| Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (includes Amendment A1:2008) | |
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (includes Amendment A1:2008) | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 10: Maschinen zum Pressen; Deutsche Fassung EN 792-10:2000+A1:2008 | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 12: Kleine Kreis-, oszillierende und Stichsaegemaschinen; Deutsche Fassung EN 792-12:2000+A1:2008 | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 2: Maschinen zum Abschneiden und Quetschen; Deutsche Fassung EN 792-2:2000+A1:2008 | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 5: Schlagbohrmaschinen; Deutsche Fassung EN 792-5:2000+A1:2008 | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 7: Schleifmaschinen fuer Schleifkoerper; Deutsche Fassung EN 792-7:2001+A1:2008 | |
| Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderu ngen - Teil 8: Schleifmaschinen fuer Schleifblaetter und Polierer; Deutsche Fassung EN 792-8:2001+A1:2008 | |
| Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply | |
| Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle | |
| Hochleistungskeramik - Mechanische Eigenschaften monolithischer Keramik bei Raumtemperatur - Teil 1: Bestimmung der Biegefestigkeit; Deutsche Fassung EN 843-1:2006 | |
| Hochleistungskeramik - Mechanische Eigenschaften monolithischer Keramik bei Raumtemperatur - Teil 5: Statistische Auswertung; Deutsche Fassung EN 843-5:2006, Berichtigungen zu DIN EN 843-5:2007-03 | |
| Hochleistungskeramik - Mechanische Eigenschaften monolithischer Keramik bei Raumtemperatur - Teil 8: Leitlinien zur Durchfuehrung von Ueberlast-Pruefungen ; Deutsche Fassung EN 843-8:2010 | |
| Hochleistungskeramik - Pruefverfahren fuer keramische Pulver - Teil 10: Bestimmung der Verdichtungseigensch aften; Deutsche Fassung EN 725-10:2007 | |
| Hochleistungskeramik - Pruefverfahren fuer keramische Pulver - Teil 1: Bestimmung von Verunreinigungen in Aluminiumoxidpulver; Deutsche Fassung EN 725-1:2007 | |
| Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 5: Payment methods; English version of DIN EN 726-5 | |
| Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module | |
| Identification card systems - Telecommunications-i ntegrated circuit(s) cards and terminals - Application-independ ent card requirements | |
| Identification card systems - Telecommunications-i ntegrated circuit(s) cards and terminals - Applications-indepen dent card-related terminal requirements | |
| Identification card systems - Telecommunications-i ntegrated circuit(s) cards and terminals - Security framework | |
| Identification card systems - Telecommunications-i ntegrated circuit(s) cards and terminals - Systems overview | |
| Identification card systems - Telecommunications-i ntegrated circuit(s) cards and terminals - Telecommunication features | |
| Industrial bump caps | |
| Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009) | |
| Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems | |
| Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009) | |
| Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4 | |
| Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; English version of DIN EN 746-5 | |
| Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; English version of DIN EN 746-8 | |
| Industrielle Systeme, Anlagen und Ausruestungen und Industrieprodukte - Strukturierungsprinz ipien und Referenzkennzeichnun g - Teil 1: Allgemeine Regeln (IEC 81346-1:2009); Deutsche Fassung EN 81346-1:2009 | |
| Industrielle Systeme, Anlagen und Ausruestungen und Industrieprodukte - Strukturierungsprinz ipien und Referenzkennzeichnun g - Teil 2: Klassifizierung von Objekten und Kennbuchstaben von Klassen (IEC 81346-2:2009); Deutsche Fassung EN 81346-2:2009 | |
| Industrielle Thermoprozessanlagen und dazugehoerige Prozesskomponenten - Sicherheitsanforderu ngen - Teil 11: Schutzsysteme; Deutsche und Englische Fassung prEN 746-11:2020 | |
| Injection-moulded plastics socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure | |
| Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust | |
| Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing | |
| Inland navigation vessels - Railings for decks - Requirements and types | |
| Inland navigation vessels - Stairs with inclination angles of 45\xb0 to 60\xb0 - Requirements, types; English version of DIN EN 790:2001 | |
| Kitchen sinks - Connecting dimensions | |
| Kupfer und Kupferlegierungen - Verfahren zur Bestimmung des Kohlenstoffgehaltes auf der Innenoberflaeche von Kupferrohren oder Fittings durch Verbrennen; Deutsche Fassung EN 723:2009 | |
| Kupplungen, Zentrierbolzen und Fussplatten fuer Arbeitsgerueste und Traggerueste - Teil 3: Ebene Fussplatten und Zentrierbolzen - Anforderungen und Pruefverfahren; Deutsche Fassung EN 74-3:2007, Berichtigungen zu DIN EN 74-3:2007-07 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 1: Allgemeine Abnahmebedingungen; Deutsche Fassung EN 818-1:1996+A1:2008 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 2: Mitteltolerierte Rundstahlketten fuer Anschlagketten - Gueteklasse 8; Deutsche Fassung EN 818-2:1996+A1:2008 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 3: Mitteltolerierte Rundstahlketten fuer Anschlagketten - Gueteklasse 4; Deutsche Fassung EN 818-3:1999+A1:2008 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 4: Anschlagketten - Gueteklasse 8; Deutsche Fassung EN 818-4:1996+A1:2008 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 5: Anschlagketten - Gueteklasse 4; Deutsche Fassung EN 818-5:1999+A1:2008 | |
| Kurzgliedrige Rundstahlketten fuer Hebezwecke - Sicherheit - Teil 6: Anschlagketten - Festlegungen zu Informationen ueber Gebrauch und Instandhaltung, die vom Hersteller zur Verfuegung zu stellen sind; Deutsche Fassung EN 818-6:2000+A1:2008... | |
| Land- und Forstmaschinen - Beregnungsmaschinen mit Schlauchtrommel - Sicherheit; Deutsche Fassung EN 908:1999+A1:2009 | |
| Landmaschinen - Sammelpressen - Sicherheit; Deutsche Fassung EN 704:1999+A1:2009 | |
| Leisure accommodation vehicles - Liquid fuel heating systems - Part 1: Caravans and caravan holiday homes | |
| Leisure accommodation vehicles - Safety ventilation requirements | |
| Longitudinal tensile test on weld metal in fusion welded joints | |
| Luft- und Raumfahrt - Aenderungsmitteilung (NOC); Deutsche Fassung ASD-STAN prEN 9116:2024 | |
| Luft- und Raumfahrt - Anforderungen an eine Aenderungsmitteilung ; Deutsche und Englische Fassung EN 9116:2015 | |
| Luft- und Raumfahrt - Konfiguration - Definition und Bezeichnung fuer Produktnormen von Verbindungselementen mit Aussengewinde; Deutsche und Englische Fassung EN 7010:2020 | |
| Luft- und Raumfahrt - Nichtmetallische Werkstoffe; Regeln fuer die Abfassung und Gestaltung von Werkstoffnormen - Teil 6: Strukturelle Klebstoffsysteme | |
| Luft- und Raumfahrt - Qualitaetsmanagement - Genehmigung der Direktlieferung - Leitlinie fuer die Luft- und Raumfahrtindustrie; Deutsche und Englische Fassung EN 9107:2018 | |
| Luft- und Raumfahrt - Qualitaetsmanagement - Qualitaetssicherungs modelle fuer Instandhaltungsbetri ebe; Deutsche und Englische Fassung EN 9110:2005 | |
| Luft- und Raumfahrt - Qualitaetsmanagement systeme - Audit (basiert auf EN ISO 9001:2000); Deutsche und Englische Fassung EN 9101:2008 | |
| Luft- und Raumfahrt - Qualitaetsmanagement systeme - Audit fuer Instandhaltungsbetri ebe (basiert auf ISO 9001:2000); Deutsche und Englische Fassung EN 9111:2005 | |
| Luft- und Raumfahrt - Qualitaetsmanagement systeme - Leitfaden fuer die Direkt-Anlieferung fuer die Luft- und Raumfahrtindustrie; Deutsche und Englische Fassung EN 9114:2015 | |
| Luft- und Raumfahrt - Qualitaetsmanagement systeme - Teil 001: Anforderungen an Zertifizierungsverfa hren fuer Qualitaetsmanagement systeme der Luftfahrt, Raumfahrt und Verteidigung; Deutsche und Englische Fassung EN 9104-001:2013 | |
| Luft- und Raumfahrt - Qualitaetsmanagement systeme - Teil 1: Anforderungen an Zertifizierungsverfa hren fuer Qualitaetsmanagement systeme der Luftfahrt, Raumfahrt und Verteidigung; Deutsche und Englische Fassung EN 9104-1:2023 | |
| Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators (includes Amendment A2:2009) | |
| Machine tools - Mechanical presses - Safety | |
| Machine tools - Safety - Hydraulic presses (includes Amendment A1:2009) | |
| Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending | |
| Mechanical properties of protective clothing - Determination of puncture resistance | |
| Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems | |
| Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; English version of DIN EN 846-10 | |
| Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; English version of DIN EN 846-11 | |
| Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; English version of DIN EN 846-13 | |
| Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; English version of DIN EN 846-2 | |
| Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; English version of DIN EN 846-3 | |
| Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps | |
| Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test); English version of... | |
| Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); English version... | |
| Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar... | |
| Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers | |
| Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; English version of DIN EN 846-9 | |
| Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units | |
| Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action... | |
| Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); English version of DIN EN 772-13 | |
| Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; English version of DIN EN 772-14 | |
| Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; English version of DIN EN 772-15 | |
| Methods of test for masonry units - Part 16: Determination of dimensions | |
| Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units; English version of DIN EN 772-18 | |
| Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units; English version of DIN EN 772-19 | |
| Methods of test for masonry units - Part 1: Determination of compressive strength; English version of DIN EN 772-1 | |
| Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units | |
| Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption | |
| Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units | |
| Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation) | |
| Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing | |
| Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units | |
| Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units; English version of DIN EN 772-5 | |
| Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; English version of DIN EN 772-6 | |
| Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water | |
| Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling | |
| Mobile waste containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design | |
| Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to 1300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design... | |
| Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design... | |
| Mobile waste containers - Part 4: Containers with 4 wheels with a capacity up to 1700 l with flat lid(s), for wide trunnion or BG-and/or wide comb lifting devices -... | |
| Mobile waste containers - Part 5: Performance requirements and test methods | |
| Mobile waste containers - Part 6: Safety and health requirements (includes Amendment A1:2008) | |
| Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method | |
| Monolithic ceramics - Thermophysical properties - Determination of thermal expansion | |
| Mountaineering equipment - Crampons - Safety requirements and test methods | |
| Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods | |
| Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety | |
| Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S; | |
| Not end-loadbearing elastomeric sealing ring type joints between thermoplastic pressure pipes and fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust | |
| Ortsbewegliche Gasflaschen - Gase und Gasgemische - Teil 1: Eigenschaften von Einzel-Gasen; Deutsche Fassung EN 720-1:1999 | |
| Ortsfeste Loeschanlagen - Wandhydranten - Teil 1: Schlauchhaspeln mit formstabilem Schlauch; Deutsche Fassung EN 671-1:2012 | |
| Overall dimensions of rotodynamic pumps - Tolerances | |
| Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products | |
| Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods; German and English version prEN 868-2:2024 | |
| Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods; German and English version prEN 868-7:2024 | |
| Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods | |
| Particulate air filters for general ventilation - Determination of the filtration performance | |
| Persoenliche Absturzschutzausrues tung - Anschlageinrichtunge n; Deutsche und Englische Fassung prEN 795:2022 | |
| Personal fall protection equipment - Sit harnesses | |
| Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification | |
| Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997 | |
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion | |
| Playing field equipment - Handball goals - Functional and safety requirements, test methods | |
| Playing field equipment - Hockey goals - Functional and safety requirements, test methods | |
| PN 10 end-suction centrifugal pumps with bearing bracket - Nominal duty point, main dimensions and designation system | |
| PN 40 side channel pumps - Nominal duty point, main dimensions and designation system | |
| Polyaluminiumhydroxi dchloridsilikat zur Aufbereitung von Wasser fuer den menschlichen Gebrauch; Deutsche Fassung prEN 885:1992 | |
| Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size | |
| Pressure equipment - Part 2: Quantities, symbols and units | |
| Pressure equipment - Part 3: Definition of parties involved | |
| Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials | |
| Pressure equipment - Part 5: Compliance and inspection documentation of materials | |
| Pressure equipment - Part 7: Safety systems for unfired pressure equipment | |
| Pressure equipment - Part 7:Safety systems for unfired pressure equipment Corrigendum 1 to English version of DIN EN 764-7:2002-09 | |
| Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing | |
| Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997 | |
| Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Aluminium-Eisen(III) -sulfat; Deutsche und Englische Fassung prEN 887:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Aluminiumsulfat; Deutsche und Englische Fassung prEN 878:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Calciumhypochlorit; Deutsche Fassung EN 900:2007 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Eisen(III)chlorid; Deutsche und Englische Fassung prEN 888:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Eisen(III)chloridsul fat; Deutsche und Englische Fassung prEN 891:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Eisen(III)sulfat-Loe sung; Deutsche und Englische Fassung prEN 890:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Natriumaluminat; Deutsche und Englische Fassung prEN 882:2025 | |
| Produkte zur Aufbereitung von Wasser fuer den menschlichen Gebrauch - Wasserstoffperoxid; Deutsche Fassung EN 902:2009 | |
| Protection against falls from a height - Anchor devices - Requirements and testing | |
| Protective clothing for use against heat and flame - Determination of the contact heat transmission through protective clothing or its materials | |
| Pruefverfahren fuer Ergaenzungsbauteile fuer Mauerwerk - Teil 14: Bestimmung der Anfangsscherfestigke it des Verbunds zwischen dem vorgefertigten Teil eines teilweise vorgefertigten, bauseits ergaenzten Sturzes und dem ueber dem Sturz befindlichen... | |
| Pumps and pump units for liquids - Common safety requirements | |
| Qualitaetsmanagement systeme - Anforderungen an Organisationen der Luftfahrt, Raumfahrt und Verteidigung - Mitgelieferte Software (Ergaenzung zu EN 9100); Deutsche und Englische Fassung EN 9115:2013 | |
| Qualitaetsmanagement systeme - Anforderungen an Organisationen der Luftfahrt, Raumfahrt und Verteidigung; Deutsche und Englische Fassung EN 9100:2009 | |
| Qualitaetsmanagement systeme - Anforderungen an Organisationen der Luftfahrt, Raumfahrt und Verteidigung; Deutsche und Englische Fassung FprEN 9100:2016 | |
| Qualitaetsmanagement systeme - Audit-Anforderungen fuer Organisationen der Luftfahrt, Raumfahrt und Verteidigung; Deutsche und Englische Fassung FprEN 9101:2016 | |
| Quality requirements for welding - Fusion welding of metallic materials - Standard quality requirements | |
| Resilient floor coverings - Determination of apparent density of agglomerated cork; German version EN 672:1996 | |
| Resilient floor coverings - Determination of conventional pattern depth | |
| Resilient floor coverings - Determination of curling on exposure to moisture | |
| Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity | |
| Resilient floor coverings - Determination of exudation of plasticizers | |
| Resilient floor coverings - Determination of gelling | |
| Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings | |
| Resilient floor coverings - Determination of seam strength | |
| Resilient floor coverings - Determination of the spreading of water | |
| Resilient floor coverings - Determination of volatile loss | |
| Resilient floor coverings - Determination of wear resistance - Part 1: Stuttgart test | |
| Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test | |
| Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue | |
| Resilient floor coverings - Specification for corklinoleum | |
| Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing | |
| Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing | |
| Resilient, textile and laminate floor coverings - Classification | |
| Rohre und Formstuecke aus Gusseisen, deren Verbindungen und Zubehoer zur Entwaesserung von Gebaeuden - Anforderungen, Pruefverfahren und Qualitaetssicherung; Deutsche Fassung EN 877:1999 + A1:2006 + A1:2006/AC:2008 | |
| Round and sawn timber - Terminology - General terms common to round timber and sawn timber | |
| Round and sawn timber - Terminology - General terms relating to sawn timber | |
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification | |
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification | |
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German and English version prEN 853:2024 | |
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification | |
| Rund- und Schnittholz - Terminologie - Teil 4: Begriffe zum Feuchtegehalt; Deutsche Fassung EN 844-4:1997 | |
| Rund- und Schnittholz - Terminologie; Dreisprachige Fassung EN 844:2019 | |
| Sacks for the transport of food aid - Paper sacks | |
| Sacks for the transport of food aid - Sacks made of jute fabric | |
| Sacks for the transport of food aid - Sacks made of lined cotton fabric | |
| Sacks for the transport of food aid - Sacks made of polyethylene film | |
| Sacks for the transport of food aid - Sacks made of woven cotton/polyolefin fabric | |
| Sacks for the transport of food aid - Sacks made of woven jute/polyolefin fabric | |
| Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only | |
| Sacks for the transport of food aid - Tubular sacks made of composite film | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators (includes Amendment A1:2008)... | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators | |
| Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010) | |
| Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009) | |
| Safety of machinery - Visual danger signals - General requirements, design and testing (includes Amendment A1:2008) | |
| Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction | |
| Safety of toys - Part 11: Organic chemical compounds - Methods of analysis | |
| Safety of toys - Part 20: Microbiological safety of toys containing accessible aqueous media; German and English version prEN 71-20:2025 | |
| Safety of toys - Part 2: Flammability (includes Amendment A1:2007) | |
| Safety of toys - Part 4: Experimental sets for chemistry and related activities; German and English version EN 71-4:2020/prA1:2024 | |
| Safety of toys - Part 4: Experimental sets for chemistry and related activities | |
| Safety of toys - Part 5: Chemical toys (sets) other than experimental sets; German and English version prEN 71-5:2024 | |
| Safety of toys - Part 5: Chemical toys (sets) other than experimental sets | |
| Safety of toys - Part 7: Finger paints; Requirements and test methods | |
| Safety of toys - Part 8: Activity toys for domestic use; German and English version prEN 71-8:2024 | |
| Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use (includes Amendment A4:2009) | |
| Safety of toys - Part 9: Organic chemical compounds - Requirements (includes Amendment A1:2007) | |
| Safety of toys; part 5: chemical toys (sets) other than experimental sets; German version EN 71-5:1993 | |
| Safety of woodworking machines - Hand fed surface planing machines (includes Amendment A1:2009) | |
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines (includes Amendment A1:2009) | |
| Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines (includes Amendment A2:2009) | |
| Safety of woodworking machines - Part 1: Common requirements | |
| Safety of woodworking machines - Surface planing and thicknessing machines | |
| Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test | |
| Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components | |
| Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts - Existing lifts - Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with... | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarms on passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire | |
| Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts (includes Amendment A1:2006) | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons... | |
| Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability... | |
| Sanitaerarmaturen - Mechanisch einstellbare Mischer (PN 10) - Allgemeine technische Spezifikation; Deutsche Fassung EN 817:2008 | |
| Sanitary tapware - Automatic shut-off valves PN 10 | |
| Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds | |
| Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes (including Corrigendum AC:1997) | |
| Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) (includes Amendment A1:2008) | |
| Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT); Corrigendum 1 to English version of DIN EN... | |
| Sicherheit von Holzbearbeitungsmasc hinen - Dickenhobelmaschinen fuer einseitige Bearbeitung; Deutsche Fassung EN 860:2007+A1:2009 | |
| Sicherheit von Holzbearbeitungsmasc hinen - Fraesmaschinen fuer einseitige Bearbeitung mit drehendem Werkzeug - Teil 2: Einspindelige Oberfraesmaschinen mit Handvorschub/mechani schem Vorschub; Deutsche Fassung EN 848-2:2007+A1:2009 | |
| Sicherheit von Holzbearbeitungsmasc hinen - Fraesmaschinen fuer einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und Fraesmaschinen; Deutsche Fassung EN 848-3:2012; Berichtigung zu DIN EN 848-3:2013-01 | |
| Sicherheit von Maschinen - Ergonomische Anforderungen an die Gestaltung von Anzeigen und Stellteilen - Teil 2: Anzeigen; Deutsche Fassung EN 894-2:1997+A1:2008 | |
| Sicherheit von Maschinen - Ergonomische Anforderungen an die Gestaltung von Anzeigen und Stellteilen - Teil 3: Stellteile; Deutsche Fassung EN 894-3:2000+A1:2008 | |
| Sicherheit von Maschinen - Sicherheitsanforderu ngen an Giessereimaschinen und -anlagen der Form- und Kernherstellung und dazugehoerige Einrichtungen; Deutsche Fassung EN 710:1997+A1:2010, Berichtigung zu DIN EN 710:1997:2010-10; Deutsche Fassung EN 710:1997+A1:201... | |
| Sicherheit von Spielzeug - Teil 12: N-Nitrosamine und N-nitrosierbare Stoffe; Deutsche Fassung EN 71-12:2013 | |
| Sicherheit von Spielzeug - Teil 13: Brettspiele fuer den Geruchsinn, Kosmetikkoffer und Spiele fuer den Geschmacksinn; Deutsche Fassung EN 71-13:2014 | |
| Sicherheit von Spielzeug - Teil 14: Trampoline fuer den haeuslichen Gebrauch; Deutsche Fassung EN 71-14:2014 | |
| Sicherheit von Spielzeug - Teil 14: Trampoline fuer den haeuslichen Gebrauch; Deutsche und Englische Fassung prEN 71-14:2024 | |
| Sicherheit von Spielzeug - Teil 15: Formamid in Spielzeugmaterial aus Schaumstoff (Gehalt); Deutsche Fassung EN 71-15:2025 | |
| Sicherheit von Spielzeug - Teil 15: Formamid in Spielzeugmaterial aus Schaumstoff; Deutsche und Englische Fassung prEN 71-15:2023 | |
| Sicherheit von Spielzeug - Teil 16: Bestimmte chlorierte phosphorhaltige Flammschutzmittel (TCEP, TCPP, TDCP) in Spielzeugmaterialien ; Deutsche Fassung EN 71-16:2025 | |
| Sicherheit von Spielzeug - Teil 17: Bestimmte Isothiazolinone (MIT, CIT, BIT) in waessrigem Spielzeugmaterial; Deutsche Fassung EN 71-17:2025 | |
| Sicherheit von Spielzeug - Teil 18: Phenol in waessrigem (Gehalt) und polymerem (Migration) Spielzeugmaterial; Deutsche Fassung EN 71-18:2024 | |
| Sicherheit von Spielzeug - Teil 19: Migration von Bisphenol A aus Spielzeugmaterial; Deutsche Fassung EN 71-19:2024 | |
| Sicherheit von Spielzeug - Teil 1: Mechanische und physikalische Eigenschaften; Deutsche Fassung EN 71-1:2005+A9:2009 | |
| Sicherheit von Spielzeug - Teil 1: Mechanische und physikalische Eigenschaften; Deutsche Fassung EN 71-1:2011, Berichtigung zu DIN EN 71-1:2011-07 | |
| Sicherheit von Spielzeug - Teil 1: Mechanische und physikalische Eigenschaften; Deutsche und Englische Fassung prEN 71-1:2024 | |
| Sicherheit von Spielzeug - Teil 2: Entflammbarkeit; Deutsche und Englische Fassung EN 71-2:2020/prA1:2024 | |
| Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente; Deutsche Fassung EN 71-3:1994 | |
| Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 71-7:2024 | |
| Sicherheit von Tunnelbohrmaschinen ohne Schild und gestaengelosen Schachtbohrmaschinen zum Einsatz in Fels - Sicherheitsanforderu ngen; Deutsche Fassung EN 815:1996+A2:2008 | |
| Sicherheits- und Regeleinrichtungen fuer Gasbrenner und Gasgeraete - Teil 3: Druck- und/oder Durchflussregler fuer Eingangsdruecke bis einschliesslich 500 kPa, elektronische Ausfuehrung; Deutsche Fassung EN 88-3:2022 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Guetertransport - Teil 31: Betretbare Gueteraufzuege; Deutsche Fassung EN 81-31:2010 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Personen- und Guetertransport - Teil 20: Personen- und Lastenaufzuege; Deutsche Fassung EN 81-20:2014 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Personen- und Guetertransport - Teil 21: Neue Personen- und Lastenaufzuege in bestehenden Gebaeuden; Deutsche Fassung EN 81-21:2009+A1:2012,... | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Personen- und Guetertransport - Teil 21: Neue Personen- und Lastenaufzuege in bestehenden Gebaeuden; Deutsche Fassung EN 81-21:2009... | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Personen- und Guetertransport - Teil 22: Elektrisch betriebene Aufzuege mit geneigter Fahrbahn; Deutsche Fassung EN 81-22:2014 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Aufzuege fuer den Personen- und Guetertransport - Teil 28: Zwei-Wege-Kommunikat ionssystem zur Verbindung mit einem Rettungsdienst; Deutsche und Englische Fassung... | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Pruefungen - Teil 50: Konstruktionsregeln, Berechnungen und Pruefungen von Aufzugskomponenten; Deutsche Fassung prEN 81-50:2011 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Spezielle Aufzuege fuer den Personen- und Guetertransport - Teil 41: Vertikale Plattformaufzuege fuer Personen mit eingeschraenkter Beweglichkeit; Deutsche Fassung EN... | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Spezielle Aufzuege fuer den Personen- und Guetertransport - Teil 41: Vertikale Plattformaufzuege fuer Personen mit eingeschraenkter Beweglichkeit; Deutsche und Englische... | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Teil 1: Elektrisch betriebene Personen- und Lastenaufzuege; Deutsche Fassung EN 81-1:1998+A3:2009 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Teil 2: Hydraulisch betriebene Personen- und Lastenaufzuege; Deutsche Fassung EN 81-2:1998+A3:2009 | |
| Sicherheitsregeln fuer die Konstruktion und den Einbau von Aufzuegen - Teil 3: Elektrisch und hydraulisch betriebene Kleingueteraufzuege; Deutsche Fassung EN 81-3:2000+A1:2008 + AC:2009 | |
| Sicherheitsregeln fuer die Konstruktion und Installation von Aufzuegen - Besondere Aufzuege fuer den Transport von Personen und Guetern - Teil 43: Kranfuehreraufzuege; Deutsche Fassung EN 81-43:2009 | |
| Sicherheitsregeln fuer Konstruktion und Einbau von Aufzuegen - Besondere Anwendungen fuer Personen- und Lastenaufzuege - Teil 77: Aufzuege unter Erdbebenbedingungen; Deutsche Fassung EN 81-77:2013 | |
| Silage cutters - Safety | |
| Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets (includes Amendment A1:2008) | |
| Specification for ancillary components for masonry - Part 2: Lintels | |
| Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork (includes Amendment A1:2008) | |
| Specification for masonry units - Part 1: Clay masonry units | |
| Specification for masonry units - Part 2: Calcium silicate masonry units | |
| Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) | |
| Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units | |
| Specification for masonry units - Part 5: Manufactured stone masonry units | |
| Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method | |
| Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation | |
| Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance | |
| Specifications for masonry units - Part 6: Natural stone masonry units | |
| Spielfeldgeraete - Fussballtore - Funktionelle und sicherheitstechnisch e Anforderungen, Pruefverfahren (einschliesslich Aenderung 1:1998); Deutsche Fassung EN 748:1995 + A1:1998 | |
| Spielfeldgeraete - Fussballtore - Funktionelle und sicherheitstechnisch e Anforderungen, Pruefverfahren; Deutsche und Englische Fassung prEN 748:2025 | |
| Technische Regeln fuer Trinkwasser-Installa tionen - Teil 1: Allgemeines; Deutsche Fassung EN 806-1:2000 + A1:2001 | |
| Technische Regeln fuer Trinkwasser-Installa tionen - Teil 1: Allgemeines; Deutsche und Englische Fassung prEN 806-1:2024 | |
| Technische Regeln fuer Trinkwasser-Installa tionen - Teil 2: Planung; Deutsche Fassung EN 806-2:2005 | |
| Technische Regeln fuer Trinkwasser-Installa tionen - Teil 2: Planung; Deutsche und Englische Fassung prEN 806-2:2024 | |
| Thermal insulating products for building applications - Determination of compression behaviour | |
| Thermal insulating products for building applications - Determination of flatness | |
| Thermal insulating products for building applications - Determination of length and width | |
| Thermal insulating products for building applications - Determination of squareness | |
| Thermal insulating products for building applications - Determination of thickness | |
| Thermal spraying - Terminology, classification | |
| Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method | |
| Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) | |
| Thermoplastische Rohrleitungssysteme; Zugfeste mechanische Verbindungen zwischen Druckrohren und Formstuecken; Pruefverfahren fuer den Widerstand gegen Herausziehen unter konstanter Belastung; Deutsche Fassung EN 712:1993 | |
| Timber structures - Test methods - Determination of mechanical properties of wood based panels | |
| Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades (includes Amendment A1:2007) | |
| Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling | |
| Tools for woodworking - Safety requirements - Part 3: Clamping devices | |
| Valves - Terminology - Part 2: Definition of components of valves | |
| Valves - Terminology - Types of valves | |
| Verbindungsstuecke mit kleinem Durchmesser fuer Fluessigkeiten und Gase in medizinischen Anwendungen - Teil 5: Verbindungsstuecke fuer Anwendungen mit aufblasbaren Manschettensystemen fuer Gliedmassen (IEC 80369-5:2016 + Cor. 1:2017); Deutsche Fassung EN... | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 10: Klebemittelbeschicht ete Faservliesmaterialie n aus Polyolefinen - Anforderungen und Pruefverfahren; Deutsche Fassung EN 868-10:2009 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 3: Papier zur Herstellung von Papierbeuteln (festgelegt in EN 868-4) und zur Herstellung von Klarsichtbeuteln und -schlaeuchen (festgelegt in EN... | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 4: Papierbeutel - Anforderungen und Pruefverfahren; Deutsche Fassung EN 868-4:2009 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 4: Papierbeutel - Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 868-4:2024 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 6: Papier fuer Niedertemperatur-Ste rilisationsverfahren - Anforderungen und Pruefverfahren; Deutsche Fassung EN 868-6:2009 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 6: Papier fuer Niedertemperatur-Ste rilisationsverfahren - Anforderungen und Pruefverfahren; Deutsche und Englische Fassung prEN 868-6:2024 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 9: Unbeschichtete Faservliesmaterialie n aus Polyolefinen - Anforderungen und Pruefverfahren; Deutsche Fassung EN 868-9:2009 | |
| Wandurinale ohne eingebauten Geruchverschluss; Anschlussmasse | |
| Wasserversorgung - Anforderungen an Wasserversorgungssys teme und deren Bauteile ausserhalb von Gebaeuden; Deutsche Fassung EN 805:2000 | |
| Wasserversorgung - Anforderungen an Wasserversorgungssys teme und deren Bauteile ausserhalb von Gebaeuden; Deutsche und Englische Fassung prEN 805:2023 | |
| Water quality - Determination of suspended solids - Method by filtration through glass fibre filters | |
| Welds in metallic materials Impact tests | |
| Werkzeugmaschinen - Mechanische Pressen - Sicherheit; Deutsche Fassung EN 692:2005+A1:2009, Berichtigung zu DIN EN 692:2009-10 | |
| Wire electrodes and wire-flux combinations for submerged arc welding of non-alloy and fine-grain steels - Classification | |
| Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:1997 | |
| Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment | |
| Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988 | |
| Wood-based panel products - Determination of formaldehyde release by the flask method | |
| Wood-based panel products -Determination of formaldehyde release by the gas analysis method | |
| Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method | |
| Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods | |
| Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy |
| << Prev | Next >> |