Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
570
580
590
600
610
620
630
631
632
633
634
635
636
637
638
639
640
641
642
650
660
670
680
690
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics \x96 Noise test code for fastener driving tools \x96 Engineering method | |
| Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics | |
| Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers | |
| Adhesives for paper and board, packaging and disposable sanitary products \x96 Determination of foam formation for aqueous adhesives | |
| Adhesives for paper and board, packaging and disposable sanitary products \x96 Determination of low temperature flexibility or cold crack temperature | |
| Advanced technical ceramics \x96 Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure \x96 Determination of flexural strength | |
| Advanced technical ceramics \x96 Mechanical properties of ceramic composites at high temperature under inert atmosphere \x96 Determination of flexural strength | |
| Aggregates for concrete | |
| Agricultural and forestry machinery \x96 Pedestrian controlled motor mowers \x96 Safety | |
| Airtight shutters - Air permeability test | |
| Anti-glare screens for roads \x96 Part 1: Performance and characteristics | |
| Anti-glare systems for roads - Part 2: Test methods | |
| Anti-glare systems for roads \x96 Part 1: Performance and characteristics | |
| Artificial climbing structures - Protection points, stability requirements and test methods | |
| Artificial climbing structures \x96 Part 1: Safety requirements and test methods for ACS with protection points | |
| Artificial climbing structures \x96 Part 2: Safety requirements and test methods for bouldering walls | |
| Artificial climbing structures \x96 Part 3: Safety requirements and test methods for climbing holds | |
| Automotive liquefied petroleum gas components \x96 Other than containers | |
| Automotive LPG components - Containers | |
| Biotechnology - Guidance on assessment of the purity, biological activity and stability of microorganism based products | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments | |
| Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the functional expression of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the characterization of the genetically modified organism by analysis of the genomic modification | |
| Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses | |
| Biotechnology - Performance criteria for shaft seals | |
| Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary | |
| Bitumen and bituminous binders - Determination of kinematic viscosity | |
| Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of the Fraass breaking point | |
| Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation | |
| Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1: RTFOT method | |
| Bitumen and bituminous binders - Preparation of test samples | |
| Bitumen and bituminous binders - Terminology | |
| Bitumen and bituminous binders \x96 Determination of efflux time by the efflux viscometer \x96 Part 1: Bituminous emulsions | |
| Bitumen and bituminous binders \x96 Determination of efflux time by the efflux viscometer \x96 Part 2: Cut-back and fluxed bituminous binders | |
| Bitumen and bituminous binders \x96 Determination of the paraffin wax content \x96 Part 2: Method by extraction | |
| Bitumen and bituminous binders \x96 Determination of the resistance to hardening under influence of heat and air \x96 Part 2: TFOT method | |
| Bitumen and bituminous binders \x96 Determination of the resistance to hardening under influence of heat and air \x96 Part 3: RFT method | |
| Bitumen and bituminous binders \x96 Specifications for paving grade bitumens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens | |
| Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays | |
| Bituminous mixtures \x96 Test method \x96 Part 33: Specimen prepared by roller compactor | |
| Bituminous mixtures \x96 Test methods \x96 Part 16: Abrasion by studded tyres | |
| Bituminous mixtures \x96 Test methods \x96 Part 17: Particle loss of porous asphalt specimens | |
| Bituminous mixtures \x96 Test methods \x96 Part 22: Wheel tracking | |
| Bituminous mixtures \x96 Test methods \x96 Part 25: Cyclic compression test | |
| Bituminous mixtures \x96 Test methods \x96 Part 26: Stiffness | |
| Bituminous mixtures \x96 Test methods \x96 Part 2: Determination of particle size distribution | |
| Bituminous mixtures \x96 Test methods \x96 Part 32: Specimen preparation by vibratory compactor | |
| Bituminous mixtures \x96 Test methods \x96 Part 35: Laboratory mixing | |
| Bituminous mixtures \x96 Test methods \x96 Part 3: Bitumen recovery: Rotary evaporator | |
| Bituminous mixtures \x96 Test methods \x96 Part 48: Interlayer Bonding | |
| Bituminous mixtures \x96 Test methods \x96 Part 4: Bitumen recovery: Fractionating column | |
| Bituminous mixtures \x96 Test methods \x96 Part 53: Cohesion increase by spreadability-meter method | |
| Bituminous mixtures \x96 Test methods \x96 Part 54: Curing of specimen for test of mixtures with bitumen emulsion | |
| Bituminous mixtures \x96 Test methods \x96 Part 55: Organoleptic assessment of mixtures with bitumen emulsion | |
| Bituminous mixtures \x96 Test methods \x96 Part 56: Specimen preparation by static compaction | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 10: Compactability | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 13: Temperature measurement | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 14: Water content | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 15: Determination of the segregation sensitivity | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 18: Binder drainage | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 23: Determination of the indirect tensile strength of bituminous specimens | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 27: Sampling | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 30: Specimen preparation by impact compactor | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 36: Determination of the thickness of a bituminous pavement | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 3: Bitumen recovery: Rotary evaporator | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 42: Amount of foreign matter in reclaimed asphalt | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 47: Determination of the ash content of natural asphalts | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 49: Determination of friction after polishing | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 5: Determination of the maximum density | |
| Bituminous mixtures \x96 Test methods for hot mix asphalt \x96 Part 8: Determination of void characteristics of bituminous specimens | |
| Brazing - Destructive tests of brazed joints | |
| Brazing - Non-destructive examination of brazed joints | |
| Brazing - Non-destructive testing of brazed joints | |
| Centrifuges - Common safety requirements | |
| Centrifuges \x96 Common safety requirements | |
| Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods | |
| Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)... | |
| Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2) | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas \x96 Test method... | |
| Chemical disinfectants and antiseptics \x96 Surgical hand disinfection \x96 Test method and requirements (phase 2, step 2) | |
| Chemical used for treatment of water intended for human consumption \x96 Potassium peroxomonosulfate | |
| Chemicals used for treatment of water intended for human consumption - Oxygen | |
| Chemicals used for treatment of water intended for human consumption - Ozone | |
| Chemicals used for treatment of water intended for human consumption \x96 Chlorine dioxide generated in situ | |
| Chemicals used for treatment of water intended for human consumption \x96 Potassium permanganate \x96 CORRECTIONS 1 | |
| Chemicals used for treatment of water intended for human consumption \x96 Potassium permanganate | |
| Child care articles \x96 Baby walking frames \x96 Safety requirements and test methods | |
| Child care articles \x96 Reclined cradles \x96 Part 1: Reclined cradles for children up to when they start to try to sit up | |
| Child care articles \x96 Reclined cradles \x96 Part 2: Reclined cradles for children up to when they start to stand up | |
| Child care articles \x96 Soother holder \x96 Safety requirements and test methods | |
| Child care articles \x96 Table mounted chairs \x96 Safety requirements and test methods | |
| Child use and care articles \x96 Baby walking frames \x96 Safety requirements and test methods | |
| Child use and care articles \x96 Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers | |
| Child use and care articles \x96 Reclined cradles | |
| Child use and care articles \x96 Soother holder \x96 Safety requirements and test methods | |
| Classification of thermosetting wood adhesives for non-structural applications | |
| Coating plants \x96 Machinery for dip coating and electrodeposition of organic liquid coating material \x96 Safety requirements | |
| Concrete compactors and smoothing machines \x96 Safety | |
| Cookware \x96 Pressure cookers for domestic use | |
| Copper and copper alloys \x96 Plumbing fittings \x96 Part 4: Fittings combining other end connections with capillary or compression ends | |
| Copper and copper alloys \x96 Plumbing fittings \x96 Part 5: Fittings with short ends for capillary brazing to copper tubes | |
| Copper and copper alloys \x96 Plumbing fittings \x96 Part 6: Fittings with push-fit ends | |
| Copper and copper alloys \x96 Plumbing fittings \x96 Part 7: Press fittings for use with metallic tubes | |
| Copper and copper alloys \x96 Plumbing fittings \x96 Part 8: Fittings with press ends for use with plastics and multilayer pipes | |
| Copper and copper alloys \x96 Scrap | |
| Copper and copper alloys \x96 Seamless, round copper tubes for air conditioning and refrigeration \x96 Part 2: Tubes for equipment | |
| Copper and copper alloys \x96 Seamless, round tubes for air conditioning and refrigeration \x96 Part 1: Tubes for piping systems | |
| Copper and copper alloys. Plumbing fittings \x96 Part 4: Fittings combining other end connections with capillary or compression ends | |
| Cranes \x96 Information for use and testing \x96 Part 1: Instructions | |
| Cranes \x96 Information for use and testing \x96 Part 2: Marking | |
| Devices to prevent pollution by backflow of potable water \x96 Controllable backflow preventer with reduced pressure zone \x96 Family B \x96 Type A | |
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods | |
| Diving accessories \x96 Combined buoyancy and rescue devices \x96 Functional and safety requirements, test methods | |
| Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods | |
| Earth-moving machinery \x96 Rubber-tyred machines \x96 Steering requirements | |
| Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level | |
| Energy performance of buildings \x96 Method for calculation of the design heat load \x96 Part 1: Space heating load, Module M3-3 | |
| Energy performance of buildings \x96 Method for calculation of the design heat load \x96 Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3 | |
| Execution of special geotechnical works - Displacement piles | |
| Execution of special geotechnical works - Grouting | |
| Execution of special geotechnical works \x96 Jet Grouting | |
| Facade scaffolds made of prefabricated components - Part 1: Product specifications | |
| Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design | |
| Falsework - Performance requirements and general design | |
| Fibre ropes for general service - Hemp | |
| Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery | |
| Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l | |
| Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance | |
| Fixed firefighting systems \x96 Automatic sprinkler systems \x96 Design, installation and maintenance | |
| Fixed firefighting systems \x96 Automatic sprinkler systems \x96 Part 2: Design and installation of ESFR and CMSA sprinkler systems | |
| Fixed firefighting systems \x96 Automatic sprinkler systems \x96 Part 3: Guidance for earthquake bracing | |
| Flame arresters - Performance requirements, test methods and limits for use | |
| Flame supervision devices for gas burning appliances \x96 Thermoelectric flame supervision devices | |
| Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges | |
| Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for used with steel flanges | |
| Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges | |
| Flanges and their joints \x96 Gaskets for Class-designated flanges \x96 Part 1: Non-metallic flat gaskets with or without inserts | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading | |
| Flexible sheets for waterproofing \x96 Bitumen, plastic and rubber sheets for roof waterproofing \x96 Determination of resistance to impact | |
| Floor heating - Systems and components - Part 1: Definitions and symbols | |
| Food processing machinery \x96 Beam mixers \x96 Safety and hygiene requirements | |
| Food processing machinery \x96 Food processors and blenders \x96 Safety and hygiene requirements | |
| Food processing machinery \x96 Hand-held blenders and whisks \x96 Safety and hygiene requirements | |
| Food processing machinery \x96 Rotating bowl cutters \x96 Safety and hygiene requirements | |
| Foodstuffs - Determination of acesulfame-K, aspartame and saccharin - High performance liquid chromatographic method | |
| Foodstuffs - Determination of cyclamate - High performance liquid chromatographic method | |
| Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-trans-retinol and 13-cis-retinol | |
| Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 2: Measurement of beta-carotene | |
| Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D3) or ergocalciferol (D2) | |
| Foodstuffs - Determination of vitamin E by high performance liquid chromatography - Measurement of alpha-, beta-, gamma- and delta-tocopherols | |
| Foot and leg protectors \x96 Requirements and test methods for toecaps and penetration resistant inserts | |
| Footwear - Ageing conditioning | |
| Footwear - Test methods for insoles - Abrasion resistance | |
| Footwear - Test methods for insoles - Delamination resistance | |
| Footwear - Test methods for insoles - Dimensional stability | |
| Footwear - Test methods for insoles - Heel pin holding strength | |
| Footwear - Test methods for insoles - Resistance to stitch tear | |
| Footwear - Test methods for insoles and insocks - Water absorption and desorption | |
| Footwear - Test methods for insoles, lining and insocks - Perspiration resistance | |
| Footwear - Test methods for outsoles - Abrasion resistance | |
| Footwear - Test methods for outsoles - Compression energy | |
| Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance | |
| Footwear - Test methods for outsoles - Dimensional stability | |
| Footwear - Test methods for outsoles - Needle tear strength | |
| Footwear - Test methods for outsoles - Tear strength | |
| Footwear - Test methods for outsoles - Tensile strength and elongation | |
| Footwear - Test methods for whole shoe - Heel attachment | |
| Footwear \x96 Test methods for insoles and insocks \x96 Water absorption and desorption | |
| Footwear \x96 Test methods for lining and insocks \x96 Static friction | |
| Footwear, leather and imitation leather manufacturing machines \x96 Nailing machines \x96 Safety requirements | |
| Founding - Ultrasonic examination - Part 1: Steel castings for general purposes | |
| Founding - Ultrasonic examination - Part 2 : Steel castings for highly stressed components | |
| Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings | |
| Founding \x96 Radiographic inspection | |
| Founding \x96 Radiographic testing \x96 Part 1: Film techniques | |
| Founding \x96 Radiographic testing \x96 Part 2: Techniques with digital detectors | |
| Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high performance liquid chromatography | |
| Fruit and vegetable juices - Determination of the free amino acids content - Liquid chromatographic method | |
| Fruit and vegetable juices - Enzymatic determination of acetic acid (acetate) content - NAD spectrometric method | |
| Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method | |
| Furniture - Assessment of surface resistance to cold liquids | |
| Furniture - Assessment of surface resistance to dry heat | |
| Furniture - Assessment of surface resistance to wet heat | |
| Furniture \x96 Ranked seating \x96 Test methods and requirements for strength and durability | |
| Gas Infrastructure \x96 Compressor stations \x96 Functional requirements | |
| Gas infrastructure \x96 Welding steel pipework \x96 Functional requirements | |
| Gas supply systems - Compressor stations - Functional requirements | |
| Glass in building - Pendulum test - Impact test method for flat glass | |
| Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data | |
| Glass in building \x96 Glazing and airborne sound insulation \x96 Product descriptions and determination of properties | |
| Glass in building \x96 Glazing and airborne sound insulation \x96 Product descriptions, determination of properties and extension rules | |
| Glass in building \x96 Insulating glass units \x96 Part 1: Generalities, dimensional tolerances and rules for the system description | |
| Glass in building \x96 Insulating glass units \x96 Part 2: Long term test method and requirements for moisture penetration | |
| Glass in building \x96 Insulating glass units \x96 Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances | |
| Glass in building \x96 Insulating glass units \x96 Part 4: Methods of test for the physical attributes of edge seals | |
| Glass in building \x96 Insulating glass units \x96 Part 5: Evaluation of conformity | |
| Glass in building \x96 Insulating glass units \x96 Part 5: Product standard | |
| Glass in building \x96 Insulating glass units \x96 Part 6: Factory production control and periodic tests | |
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1 000 - Compatibility and interchangeability | |
| Grouts for tiles \x96 Part 1: Determination of chemical resistance of reaction resin mortars | |
| Grouts for tiles \x96 Part 2: Determination of resistance to abrasion | |
| Grouts for tiles \x96 Part 3: Determination of flexural and compressive strength | |
| Grouts for tiles \x96 Part 4: Determination of shrinkage | |
| Grouts for tiles \x96 Part 5: Determination of water absorption | |
| Gymnastic equipment \x96 Hanging rings \x96 Functional and safety requirements, test methods | |
| Gypsum based adhesives for gypsum blocks \x96 Definitions, requirements and test methods | |
| Gypsum blocks \x96 Definitions, requirements and test methods | |
| Heating systems in buildings - Design for water-based heating systems | |
| Heating systems in buildings \x96 Method for calculation of the design heat load | |
| Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure | |
| Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases | |
| Industrial valves - Method for sizing the operating element | |
| Industrial valves - Test of flow resistance using water as test fluid | |
| Industrial valves \x96 Butt welding ends for steel valves | |
| Industrial valves \x96 Socket welding ends for steel valves | |
| Industrial valves \x96 Valves for chemical and petrochemical process industry \x96 Requirements and tests | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements | |
| Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods | |
| Industrial, commercial and garage doors and gates \x96 Installation and use | |
| Industrial, commercial and garage doors and gates \x96 Mechanical aspects \x96 Requirements and test methods | |
| Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous... | |
| Influence of materials on water intended for human consumption \x96 Influence due to migration \x96 Part 2: Test method for non-metallic and non-cementitious site-applied materials | |
| Influence of materials on water intended for human consumption \x96 Influence due to migration \x96 Part 3: Test method for ion exchange and adsorbent resins | |
| Influence of materials on water intended for human consumption \x96 Influence due to migration \x96 Part 4: Test method for water treatment membranes | |
| Inland navigation vessels - Connections for the transfer of diesel oil | |
| Inland navigation vessels - Swing derricks | |
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems | |
| Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing | |
| Lead and lead alloys - Lead | |
| Light and lighting - Basic terms and criteria for specifying lighting requirements | |
| Liquid petroleum products - Determination of contamination in middle distillates | |
| Liquid petroleum products \x96 Determination of total contamination \x96 Part 1: Middle distillates and diesel fuels | |
| Liquid petroleum products \x96 Determination of total contamination \x96 Part 2: Fatty acid methyl esters | |
| LPG equipment and accessories - Inspection and requalification of LPG tanks greater than 13 m\xb3 | |
| LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m\xb3 | |
| LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal | |
| LPG equipment and accessories \x96 Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) \x96 Design and construction | |
| Machinery for the supply and circulation of coating materials under pressure \x96 Safety requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 1: Common requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 2: Block making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 3: Slide and turntable machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 4:Concrete roof tile making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 5-1: Pipe making machines manufacturing in the vertical axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 5-2: Pipe making machines manufacturing in the horizontal axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 5-3: Pipe prestressing machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 5-4: Concrete pipe coating machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate \x96 Safety \x96 Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes | |
| Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs | |
| Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing | |
| Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles | |
| Mechanical dishwashing resistance of utensils - Part 2: Inspection of non-metallic articles | |
| Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles | |
| Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles | |
| Mechanical seals - Principal dimensions, designation and material codes | |
| Mixing machinery for coating materials \x96 Safety requirements \x96 Part 1: Mixing machinery for use in vehicle refinishing | |
| Multifunctional controls for gas burning appliances | |
| National Annex to EN 12602, Prefabricated reinforced components of autoclaved aerated concrete | |
| Natural stone \x96 Terminology | |
| Non-destructive testing - Characteristics of focal spot in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro... | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments | |
| Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment | |
| Non-destructive testing \x96 Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing \x96 Part 2: Pinhole camera radiographic method | |
| Non-destructive testing \x96 Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing \x96 Part 3: Slit camera radiographic method | |
| Non-destructive testing \x96 Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing \x96 Part 4: Edge method | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic examination equipment \x96 Part 2: Probes | |
| Non-destructive testing \x96 Determination of the size of industrial radiographic sources \x96 Radiographic method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 1: Voltage divider method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 2: Constancy check by the thick filter method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage \x96 Part 3: Spectrometric method | |
| Packaging \x96 Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules | |
| Paper - Printing and business paper - Requirements for continuous stationery | |
| Passive safety of support structures for road equipment \x96 Requirements and test methods | |
| Passive safety of support structures for road equipment \x96 Requirements, classification and test methods | |
| Personal fall protection equipment \x96 Rope access systems \x96 Rope adjustment devices | |
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method | |
| Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture... | |
| Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content | |
| Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas... | |
| Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC og DMC | |
| Plastics \x96 Thermoset moulding compounds \x96 Determination of the degree of fibre wet out in SMC | |
| Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l | |
| Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l | |
| Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L | |
| Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm... | |
| Plastics piping systems \x96 Thermoplastics piping systems for buried non-pressure applications \x96 Test methods for leaktightness of elastomeric sealing ring type joints | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system | |
| Plastics warning devices for underground cables and pipelines with visual characteristics | |
| Playing field equipment - Basketball equipment - Functional and safety requirements, test methods | |
| Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods | |
| Precast concrete products \x96 Elements for fences | |
| Precast concrete products \x96 Floor slats for livestock | |
| Precast concrete products \x96 Foundation piles | |
| Precast concrete products \x96 Masts and poles | |
| Prefabricated reinforced components of autoclaved aerated concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling -... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion | |
| Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) | |
| Railway applications - Structural requirements of railway vehicle bodies | |
| Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods | |
| Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure | |
| Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products | |
| Railway applications - Tank wagons - Part 6: Manholes | |
| Railway applications - Tank wagons - Part 8: Heating connections | |
| Railway applications \x96 Structural requirements of railway vehicle bodies \x96 Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) | |
| Railway applications \x96 Structural requirements of railway vehicle bodies \x96 Part 2: Freight wagons | |
| Railway applications \x96 Tank wagons \x96 Part 3: Bottom filling and emptying devices for gases liquefied under pressure | |
| Raised access floors | |
| Reciprocating internal combustion engine driven generating sets \x96 Safety | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Positive displacement refrigerant compressors | |
| Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods | |
| Residental independent boilers fired by solid fuel \x96 Nominal heat output up to 50 kW \x96 Requirements and test methods | |
| Residential cookers fired by solid fuel \x96 Requirements and test methods | |
| Road marking materials - Laboratory methods for identification | |
| Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC application layer | |
| Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link layer: medium access and logical link control | |
| Roll containers - Part 1: Terminology | |
| Roll containers - Part 2: General design and safety principles | |
| Roll containers - Part 3: Test methods | |
| Roll containers - Part 4: Performance requirements | |
| Rubber- or plastic-coated fabrics \x96 Determination of resistence to liquids | |
| Safety nets - Part 2: Safety requirements for the positioning limits | |
| Safety of machine tools - Hydraulic press brakes | |
| Safety of machine tools \x96 Drilling machines | |
| Safety of machine tools \x96 Hydraulic press brakes | |
| Safety of machine-tools - Manually controlled turning machines with or without automatic control | |
| Safety of machinery \x96 Noise test code for foundry machines and equipment | |
| Safety of machinery \x96 Requirements for the drafting of the vibration clauses of safety standards | |
| Safety of woodworking machines \x96 Chip and dust extraction systems with fixed installation \x96 Safety requirements | |
| Safety of woodworking machines \x96 Four-sided moulding machines | |
| Sanitary appliances - Specification for whirlpool baths | |
| Sanitary appliances \x96 Specification for whirlpool baths | |
| Sanitary tapware - Low pressure mechanical mixing valves - General technical specification | |
| Sanitary tapware \x96 Low pressure thermostatic mixing valves \x96 General technical specifications | |
| Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l | |
| Sectional Specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications | |
| Securing of cargo on road vehicles \x96 Body structure of commercial vehicles \x96 Minimum requirements | |
| Securing of cargo on road vehicles \x96 Lashing points on commercial vehicles for goods transportation \x96 Minimum requirements and testing | |
| Shortened version of EN 12602 for aerated concrete elements | |
| Skylight and conservatory roller shutters - Resistance to snow load - Test method | |
| Small wastewater treatment systems for up to 50 PT \x96 Part 1: Prefabricated septic tanks | |
| Small wastewater treatment systems for up to 50 PT \x96 Part 3: Packaged and/or site assembled domestic wastewater treatment plants | |
| Small wastewater treatment systems for up to 50 PT \x96 Part 4: Septic tanks assembled in situ from prefabricated kits | |
| Small wastewater treatment systems for up to 50 PT \x96 Part 6: Prefabricated treatment units for septic tank effluent | |
| Small wastewater treatment systems for up to 50 PT \x96 Part 7: Prefabricated tertiary treatment units | |
| Soil improvers and growing media - Determination of a quantity | |
| Soil improvers and growing media - Sampling | |
| Solid wood panels - Classification and terminology | |
| Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method | |
| Stationary waste containers \x96 Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device \x96 Dimensions... | |
| Stationary waste containers \x96 Part 2: Performance requirements and test methods | |
| Stationary waste containers \x96 Part 3: Safety and health requirements | |
| Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials | |
| Surface active agents - Determination of foaming power - Perforated disc beating method | |
| Surface active agents - Determination of the pH value of solutions or dispersions | |
| Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD | |
| Surface active agents - Determination of the water number of alkoxylated products | |
| Surface active agents - Preparation of water with known calcium and magnesium hardness | |
| Surfaces for sports areas - Determination of water infiltration rate | |
| Swap bodies and commercial vehicles \x96 Tarpaulins \x96 Part 1: Minimum requirements | |
| Swap bodies and commercial vehicles \x96 Tarpaulins \x96 Part 2: Minimum requirements for curtainsiders | |
| Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-fr ozen food and ice cream \x96 Tests, performance, suitability | |
| Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design | |
| Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design | |
| Temporary works equipment - Part 2: Information on materials | |
| Temporary works equipment - Part 3: Load testing | |
| Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design | |
| Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods | |
| Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test | |
| Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test | |
| Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination | |
| Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test | |
| Testing of welded joints of thermoplastics semi-finished products \x96 Part 2: Tensile test | |
| Testing of welded joints of thermoplastics semi-finished products \x96 Part 4: Peel test | |
| Testing of welded joints of thermoplastics semi-finished products \x96 Part 7: Tensile test with waisted test specimens | |
| Testing of welded joints of thermoplastics semi-finished products \x96 Part 8: Requirements | |
| Textile floor coverings \x96 Assessment of impregnations in needled floor coverings by means of a soiling test | |
| Textile glass - Yarns - Part 1: Designation | |
| Textile glass - Yarns - Part 2: Methods of test and general specifications | |
| Textile glass - Yarns - Part 3: General requirements for general applications | |
| Textiles - Industrial sewing threads made wholly or partly from synthetic fibres | |
| Textiles - Para-aramid multifilament yarns - Test methods | |
| Textiles - Sampling of fibres, yarns and fabrics for testing | |
| Thermal cleaning systems for exhaust gas from surface treatment equipment \x96 Safety requirements | |
| Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium... | |
| Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal... | |
| Traffic signal controllers \x96 Functional safety requirements | |
| Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to... | |
| Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders | |
| Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x96 Classification, requirements and test methods \x96 Part 1: Non-coated PVC-U profiles with light coloured surfaces | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x96 Classification, requirements and test methods \x96 Part 2: PVC-U profiles covered with foils bonded with adhesives | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x96 Classification, requirements and test methods \x96 Part 4: PVC-U profiles with thermo-laminated foils | |
| Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units | |
| Ventilation for buildings - Symbols, terminology and graphical symbols | |
| Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems | |
| Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods | |
| Water based surface embedded heating and cooling systems \x96 Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods | |
| Water based surface embedded heating and cooling systems \x96 Part 3: Dimensioning | |
| Water based surface embedded heating and cooling systems \x96 Part 4: Installation | |
| Water based surface embedded heating and cooling systems \x96 Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls \x96 Determination of the thermal output | |
| Water quality - Gas chromatographic determination of some selected chlorophenols in water | |
| Welded static non-pressurised thermoplastic tanks - Part 1: General principles | |
| Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks | |
| Welded static non-pressurised thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks | |
| Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints | |
| Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors, walls and roofs | |
| Zinc and zinc alloys - Castings - Specifications |
| << Prev | Next >> |