Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
580
590
600
610
620
630
635
636
637
638
639
640
641
642
643
644
645
646
647
650
660
670
680
690
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes | |
| Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates | |
| Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature | |
| Adhesives \x96 Adhesives for bonding parquet to subfloor \x96 Test methods and minimum requirements | |
| Adhesives \x96 Wood adhesives \x96 Determination of tensile strength of lap joints at elevated temperature (WATT '91) | |
| Adhesives for floor coverings \x96 Requirements for mechanical and electrical performance | |
| Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes | |
| Adhesives for non-structural wood applications - Test method and requirements for resistance to static load | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique | |
| Advanced technical ceramics - Terms, definitions and abbreviations | |
| Agricultural and forestry machinery \x96 Seed drills \x96 Safety | |
| Agricultural and forestry machinery \x96 Solid fertilizer distributors \x96 Safety | |
| Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications | |
| Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification | |
| Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings | |
| Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings | |
| Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications | |
| Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components | |
| Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods | |
| Aluminium and aluminium alloys \x96 Chemical analysis \x96 Inductively coupled plasma optical emission spectral analysis | |
| Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence | |
| Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence | |
| Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D | |
| Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers | |
| Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) | |
| Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods | |
| Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods | |
| Binders for magnesite screeds \x96 Caustic magnesia and magnesium chloride \x96 Part 1: Definitions, requirements | |
| Bitumen and bituminous binders - Characterization of perceptible properties | |
| Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions | |
| Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving | |
| Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method | |
| Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method | |
| Bitumen and bituminous binders \x96 Determination of needle penetration | |
| Bitumen and bituminous binders \x96 Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| Bitumen and bituminous binders \x96 Specification framework for polymer modified bitumens | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Beads in envelopes) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Beads in solid glass or vitreous enamel) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Disk type) | |
| Blank Detail Specification: Directly heated negative temperature coefficient thermistors (Rod type) | |
| Blank Detail Specification: Fixed low power film resistors | |
| Blank Detail Specification: Fixed low power film surface mount (SMD) resistors | |
| Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors | |
| Blank Detail Specification: Fixed power resistors (Assessment level S) | |
| Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods | |
| Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing | |
| Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods | |
| Brazing - Guidance on the application of brazed joints | |
| Carbonate and silicate liming materials \x96 Determination of reactivity \x96 Potentiometric titration method with hydrochloric acid | |
| Cement \x96 Composition, specifications and conformity criteria for very low heat special cements | |
| Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography | |
| Characterization of waste - Terminology - Part 1: Material related terms and definitions | |
| Characterization of waste - Terminology - Part 2: Management related terms and definitions | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in veterinary area - Test method and requirements (phase 2,... | |
| Chemicals used for treatment of water intended for human consumption - Ammonium chloride | |
| Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides | |
| Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides | |
| Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammo nium chloride) | |
| Chemicals used for treatment of water intended for human consumption - Sodium alginate | |
| Chemicals used for treatment of water intended for human consumption \x96 Modified starches | |
| Chemicals used for water treatment intended for human consumption - Polyamines | |
| Child use and care articles - Baby bouncers - Safety requirements and test methods | |
| Child use and care articles - Soothers for babies and young children - Part 2: Mechanical requirements and tests | |
| Child use and care articles - Soothers for babies and young children - Safety requirements and test methods | |
| Child use and care articles \x96 Soothers for babies and young children \x96 Safety requirements and test methods | |
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners | |
| Chimneys - Freeze-thaw resistance test method for chimney products | |
| Cold applied joint sealants \x96 Part 1:Test method for the determination of rate of cure | |
| Cold applied joint sealants \x96 Part 7: Test method for the determination of the resistance to flame | |
| Cold applied joint sealants \x96 Test method \x96 Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants \x96 Test methods \x96 Part 2: Determination of tack free time | |
| Cold applied joint sealants \x96 Test methods \x96 Part 3: Determination of self-levelling properties | |
| Cold applied joint sealants \x96 Test methods \x96 Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals | |
| Cold applied joint sealants \x96 Test methods \x96 Part 5: Determination of the resistance to hydrolysis | |
| Cold applied joint sealants \x96 Test methods \x96 Part 8: Determination of the artificial weathering by UV-irradiation | |
| Cold applied joint sealants \x96 Test methods \x96 Part 9: Function testing of joint sealants | |
| Copper and copper alloys \x96 European numbering system | |
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements | |
| Coverings \x96 Determination of fire protection ability | |
| Cranes \x96 Manually controlled load manipulating devices | |
| Cryogenic vessels \x96 Static non-vacuum insulated vessels \x96 Part 1: Fundamental requirements | |
| Cryogenic vessels \x96 Static non-vacuum insulated vessels \x96 Part 2: Design, fabrication, inspection and testing | |
| Cryogenic vessels \x96 Static non-vacuum insulated vessels \x96 Part 3: Operational requirements | |
| Curtain Walling \x96 Impact resistance \x96 Performance requirements | |
| Decorative oil lamps \x96 Safety requirements and test methods | |
| Derivates from coal pyrolysis - Coal tar and pitch based binders and related products: painting tar - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : impregnating pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: briquetting pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: carbon binder pitch - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: coating tar - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: refractory binders - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: road tars - Characteristics and test methods | |
| Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods | |
| Derivatives from coal pyrolysis \x96 Coal tar based oils: creosotes \x96 Specifications and test methods | |
| Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 | |
| Detail Specification: Fixed low power film high stability SMD resistors \x96 Rectangular \x96 Stability classes 0,1; 0,25 | |
| Detail Specification: Fixed low power film resistors \x96 Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads | |
| Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 | |
| Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 | |
| Detail specification: Fixed low power film SMD resistors \x96 Cylindrical \x96 Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 | |
| Detail specification: Fixed low power film SMD resistors \x96 Rectangular \x96 Stability classes 1; 2 | |
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 | |
| Determination of explosion characteristics of dust clouds \x96 Part 1: Determination of the maximum explosion pressure pmax of dust clouds | |
| Determination of explosion characteristics of dust clouds \x96 Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds | |
| Determination of explosion characteristics of dust clouds \x96 Part 3: Determination of the lower explosion limit LEL of dust clouds | |
| Determination of explosion characteristics of dust clouds \x96 Part 4: Determination of the limiting oxygen concentration LOC of dust clouds | |
| Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels | |
| Dimensions of bed blankets | |
| Diving suits \x96 Part 1: Wet suits \x96 Requirements and test methods | |
| Diving suits \x96 Part 2: Dry suits \x96 Requirements and test methods | |
| Diving suits \x96 Part 3: Actively heated or cooled suit (systems) \x96 Requirements and test methods | |
| Dock levellers \x96 Safety requirements | |
| Drainage channels for vehicular and pedestrian areas \x96 Classification, design and testing requirements, marking and evaluation of conformity | |
| Durability of wood and wood-based products \x96 Performance criteria for curative wood preservatives as determined by biological tests | |
| Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization | |
| Electrochemical realkalization and chloride extraction treatments for reinforced concrete \x96 Part 2: Chloride extraction | |
| Execution of special geotechnical works - Micropiles | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents (Reference method) | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters (FAME) \x96 Determination of acid value | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters (FAME) \x96 Determination of methanol content | |
| Fat and oil derivatives \x96 Fatty Acid Methyl Esters (FAME) \x96 Determination of oxidation stability (accelerated oxidation test) | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability | |
| Flexible sheets for waterproofing \x96 Bitumen damp proof sheets including bitumen basement tanking sheets \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Bitumen water vapour control layers \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Plastic and rubber vapour control layers \x96 Definitions and characteristics | |
| Flexible sheets for waterproofing \x96 Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles \x96 Determination of water absorption | |
| Foam producing solutions for leak detection on gas installations | |
| Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method... | |
| Foodstuffs - Determination of folate by microbiological assay | |
| Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up | |
| Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up | |
| Foodstuffs - Determination of patulin in clear and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up | |
| Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion | |
| Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion | |
| Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing | |
| Foodstuffs - Determination of trace elements - Determination og lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion | |
| Foodstuffs - Determination of vitamin B1 by HPLC | |
| Foodstuffs - Determination of vitamin B2 by HPLC | |
| Foodstuffs - Determination of vitamin B6 by high performance chromatography | |
| Foodstuffs - Determination of vitamin B6 by microbiological assay | |
| Foodstuffs - Determination of vitamin C by HPLC | |
| Foodstuffs - Determination of vitamin K1 by HPLC | |
| Foodstuffs \x96 Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C \x96 Part 1: Pre-fabricated ceiling mounted radiant panels for space heating \x96 Technical specifications and requirements | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C \x96 Part 2: Pre-fabricated ceiling mounted radiant panels for space heating \x96 Test method for thermal output... | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C \x96 Part 3: Prefabricated ceiling mounted radiant panels for space heating \x96 Rating method and evaluation of... | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C \x96 Part 4: Pre-fabricated ceiling mounted radiant panels \x96 Test method for cooling capacity | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C \x96 Part 5: Open or closed heated ceiling surfaces \x96 Test method for thermal output | |
| Fume cupboards - Part 1: Vocabulary | |
| Fume cupboards - Part 2: Safety and performance requirements | |
| Fume cupboards - Part 4: On-site test methods | |
| Fume cupboards - Part 6: Variable air volume fume cupboards | |
| Fume cupboards - Part 7: Fume cupboards for high heat and acidic load | |
| Fume cupboards \x96 Part 3: Type test methods | |
| Fume cupboards \x96 Part 8: Fume cupboards for work with radioactive materials | |
| Geosynthetic barriers \x96 Determination of permeability to liquids | |
| Geosynthetics - Determination of burst strength | |
| Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids | |
| Glass in building - Basic alkaline earth silicate glass - Part 1: Float glass | |
| Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building \x96 Basic alkaline earth silicate glass products \x96 Part 2: Evaluation of conformity/Product standard | |
| Glass in building \x96 Heat soaked thermally toughened soda lime silicate safety glass \x96 Part 1: Definition and description | |
| Glass in building \x96 Heat soaked thermally toughened soda lime silicate safety glass \x96 Part 2: Evaluation of conformity/Product standard | |
| Glass in building \x96 Thermally toughened alkaline earth silicate safety glass \x96 Part 2: Evaluation of conformity/Product standard | |
| Glass in furniture - Test methods | |
| Gypsum board products from reprocessing \x96 Definitions, requirements and test methods | |
| Gypsum elements for suspended ceilings - Definitions, requirements and test methods | |
| Gypsum elements for suspended ceilings \x96 Definitions, requirements and test methods | |
| Heat exchangers \x96 Hydronic room fan coil units \x96 Test procedures for establishing the performance | |
| Heating Systems in buildings - Design and installation of direct electrical room heating systems | |
| Heating systems in buildings \x96 Installation and commissioning of water based heating and cooling systems | |
| Hexagon bolts with flange with metric fine pitch thread - Small series | |
| Hexagon nuts with flange - Fine pitch thread | |
| High performance industrial helmets | |
| High rise aerial appliances for fire and rescue service use \x96 Turntable ladders with combined movements \x96 Safety and performance requirements and test methods | |
| High rise aerial appliances for fire and rescue service use \x96 Turntable ladders with sequential movements \x96 Safety and performance requirements and test methods | |
| Holders for lifebuoys | |
| Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils | |
| Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures | |
| Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures | |
| In vitro diagnostic medical devices \x96 Single-use receptacles for the collection of specimens, other than blood, from humans | |
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems | |
| Inland navigation vessels - Installation of berths and loading areas | |
| Inland navigation vessels - Studless anchor chain - Round steel link chain | |
| Inland navigation vessels \x96 Gangways for passenger vessels \x96 Requirements, tests | |
| Inlet valves for flushing cisterns with internal overflow | |
| Inspection and testing of LPG road tankers | |
| Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing | |
| Irrigation techniques - Irrigation hydrants | |
| Irrigation techniques - Water application intensity - Calculation principles and measurement methods | |
| Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants | |
| Joint fillers and sealants \x96 Part 1: Specifications for hot applied sealants | |
| Joint fillers and sealants \x96 Part 2: Specifications for cold applied sealants | |
| Joint fillers and sealants \x96 Part 3: Specifications for preformed joint seals | |
| Jointing materials for gypsum boards - Definitions, requirements and test methods | |
| Laboratory furniture - Recommendations for design and installation | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications | |
| Lead and lead alloys - Scraps - Terms and definitions | |
| Leather - Physical and mechanical tests - Determination of fogging characteristics | |
| Lifebuoys - Requirements, tests | |
| Liming materials \x96 Description and minimum requirements | |
| Liquid petroleum products - Determination of fatty methyl ester (FAME) content in middle distillates - Infrared spectrometry method | |
| Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods | |
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method | |
| Liquid petroleum products \x96 Fatty acid methyl esters (FAME) for use in diesel engines and heating applications \x96 Requirements and test methods | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction | |
| LPG equipment and accessories \x96 Pressure relief valves for LPG pressure vessels \x96 Ancillary equipment | |
| LPG Equipment and accessories \x96 Pressure relief valves for LPG pressure vessels | |
| Machine tools \x96 Safety \x96 Guillotine shears | |
| Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during... | |
| Materials obtained from end of life tyres \x96 Part 1: General definitions related to the methods for determining their dimension(s) and impurities | |
| Materials obtained from end of life tyres \x96 Part 2: Granulates and powders \x96 Methods for determining the particle size distribution and impurities, including free steel and free textile content... | |
| Materials obtained from end of life tyres \x96 Part 3: Shreds, cuts and chips \x96 Methods for determining their dimension(s) including protruding filaments dimensions | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements | |
| Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance | |
| Metal framing components for gypsum board systems - Definitions, requirements and test methods | |
| Metal framing components for gypsum plasterboard systems \x96 Definitions, requirements and test methods | |
| Metal profiles with thermal barrier \x96 Mechanical performance \x96 Requirements, proof and tests for assessment | |
| Natural stone test methods - Determination of abrasion resistance | |
| Natural stone test methods - Determination of Knoop hardness | |
| Natural stone test methods - Determination of resistance to ageing by salt mist | |
| Natural stone test methods - Determination of resistance to ageing by thermal shock | |
| Natural stone test methods - Determination of rupture energy | |
| Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) | |
| Natural stone test methods - Determination of the slip resistance by means of the pendulum tester | |
| Non fatty foods - Determination of benzimidazol fungicides, carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partit ion clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazol and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method with solid phase extraction clean-up | |
| Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column | |
| Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| Non-destructive testing - Ultrasonic thickness measurement | |
| Non-destructive testing \x96 Qualification of radiographic film digitisation systems \x96 Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control | |
| Non-destructive testing \x96 Qualification of radiographic film digitisation systems \x96 Part 2: Minimum requirements | |
| Non-fatty food - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up | |
| Office furniture - Storage furniture - Part 2: Safety requirements | |
| Office furniture \x96 Storage furniture \x96 Part 3: Test methods for the determination of stability and strength of the structure | |
| Office furniture \x96 Tables and desks and storage furniture \x96 Test methods for the determination of strength and durability of moving parts | |
| Ophthalmic optics - Specifications for ready-to-wear spectacles | |
| Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop | |
| Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide | |
| Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer | |
| Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions | |
| Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide | |
| Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction | |
| Packaging - Paper and paperboard packaging - Design of cartons | |
| Packaging - Terminology - Basic terms and definitions | |
| Paper and board - Measurement of specular gloss - 45\xba gloss with a parallel beam, DIN method | |
| Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (Tenax) as a simulant | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) | |
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines | |
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method | |
| Plastics and rubber machines \x96 Two-roll mills \x96 Safety requirements | |
| Plastics piping and ducting systems \x96 Thermoplastics pipes \x96 Determination of resistance to external blows by the staircase method | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 1: Specifications for pipes, fittings and the system | |
| Plywood - Calculation method for some mechanical properties | |
| Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system | |
| Postal services \x96 Address databases \x96 Part 1: Components of postal addresses | |
| Postal services \x96 Quality of service \x96 Complaints handling principles | |
| Potentially explosive atmospheres - Application of quality systems | |
| Precast concrete products \x96 Precast concrete garages \x96 Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions | |
| Preformed plasterboard cornices \x96 Definitions, requirements and test methods | |
| Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps \x96 Part 1: Vessels \x96 General requirements | |
| Pressure equipment for refrigerating systems and heat pumps \x96 Part 2: Piping \x96 General requirements | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete | |
| Protective clothing \x96 Garments for protection against cool environments | |
| Protective clothing \x96 Gloves and armguards protecting against cuts by powered knives \x96 Requirements and test methods | |
| Protective clothing \x96 Performance requirements and tests methods for protective clothing against infective agents | |
| Protective clothing \x96 Wrist, palm, knee and elbow protectors for users of roller sports equipment \x96 Requirements and test methods | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Railway applications - Aerodynamics - Part 1: Symbols and units | |
| Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels | |
| Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track | |
| Railway applications - Suspension components - Parabolic springs, steel | |
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels | |
| Railway applications \x96 Aerodynamics \x96 Part 4: Requirements and test procedures for aerodynamics on open track | |
| Railway applications \x96 Aerodynamics \x96 Part 5: Requirements and assessment procedures for aerodynamics in tunnels | |
| Railway applications \x96 Aerodynamics \x96 Part 5: Requirements and test procedures for aerodynamics in tunnels | |
| Railway applications \x96 Aerodynamics \x96 Part 6: Requirements and test procedures for cross wind assessment | |
| Railway applications \x96 Braking \x96 Requirements for the brake system of trains hauled by locomotives | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 1: Technical requirements for running | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 2: Technical requirements for travelling and working | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 2: Technical requirements for working | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 3: General safety requirements | |
| Railway applications \x96 Track \x96 Railbound construction and maintenance machines \x96 Part 4: Technical requirements for running, travelling and working on urban rail | |
| Railway applications \x96 Track \x96 Safety requirements for portable machines and trolleys for construction and maintenance | |
| Railway applications \x96 Wheelsets and bogies \x96 Monobloc Wheels \x96 Technical approval procedure \x96 Part 1: Forged and rolled wheels | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements | |
| Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements | |
| Reinforcements - Specification for textile glass rovings - Part 1: Designation | |
| Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements | |
| Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements | |
| Rescue systems \x96 Transportation of incubators \x96 Part 1: Interface conditions | |
| Rescue systems \x96 Transportation of incubators \x96 Part 2: System requirements | |
| Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes | |
| Resilient floor coverings \x96 Specification for floor panels for loose laying | |
| Resilient, textile and laminate floor coverings \x96 Essential characteristics | |
| Resilient, textile, laminate and modular multilayer floor coverings \x96 Essential characteristics | |
| Respiratory equipment - Self-contained re-breathing diving apparatus | |
| Respiratory protective devices \x96 Halfmasks and quarter masks \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Mouthpiece assemblies \x96 Requirements, testing, marking | |
| Respiratory protective devices \x96 Particle filters \x96 Requirements, testing, marking | |
| Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity | |
| Rigid plastics containers - Method for determination of drainability | |
| Rigid plastics containers - Specification of tolerance for dimensions, weight and volume | |
| Road marking materials - Premix glass beads | |
| Road marking materials \x96 Drop on materials \x96 Glass beads, antiskid aggregates and mixtures of the two | |
| Safety of machine tools \x96 Transfer and special-purpose machines | |
| Safety of machinery \x96 Equipment for power driven parking of motor vehicles \x96 Safety and EMC requirements for design, manufacturing, erection and commissioning stages | |
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects | |
| Sanitary appliances - Communal washing troughs | |
| Sanitary appliances \x96 Communal washing troughs | |
| Sawn timber - Assessment of drying quality | |
| Sectional specification - Fixed low power surface mount (SMD) resistors | |
| Sectional Specification: Fixed low power film resistors | |
| Sectional Specification: Fixed power resistors | |
| Space product assurance - Material selection for controlling stress-corrosion cracking | |
| Space product assurance - Nonconformance control system | |
| Space product assurance - Thermal cycling test for the screening of space materials and processes | |
| Space product assurance - Thermal vacuum outgassing test for the screening of space materials | |
| Space product assurance \x96 Flammability testing for the screening of space materials | |
| Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above | |
| Specifications - Part 4: Fly ash for hydraulically bound mixtures | |
| Stainless steel shell boilers | |
| Stationary source emissions - Quality assurance of automated measuring systems | |
| Step stools | |
| Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods | |
| Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing | |
| Sterilizers for medical purposes \x96 Ethylene oxide sterilizers \x96 Requirements and test methods | |
| Sterilizers for medical purposes \x96 Low temperature steam and formaldehyde sterilizers \x96 Requirements and testing | |
| Stone shields for off-road motorcycling suited to protect riders against stones and debris \x96 Requirements and test methods | |
| Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature | |
| Structural Adhesives \x96 Determination of the pot life (working life) of multi-component adhesives | |
| Structural round timber - Test methods | |
| Structural timber \x96 Wood poles for overhead lines | |
| Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method | |
| Surface active agents - Foaming power and antifoaming power - Turbine stirring method | |
| Suspended ceilings \x96 Requirements and test methods | |
| Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions | |
| Tanks for the transport of dangerous goods \x96 Metallic pressure tanks \x96 Design and construction | |
| Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels | |
| Tanks for transport of dangerous goods \x96 Digital interface for product recognition devices for liquid fuels | |
| Testing of textiles - Evaluation of the action of microfungi | |
| Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat | |
| Textile floor coverings \x96 Classification of machine-made pile rugs and runners | |
| Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition | |
| Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device | |
| Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodection plate device | |
| Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device | |
| Textiles \x96 Laundry processed textiles \x96 Biocontamination control system | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations \x96 In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products \x96 Part 1: Specification for the rigid foam dispensed... | |
| Thermal insulating products for building equipment and industrial installations \x96 In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products \x96 Part 1: Specification for the rigid foam spray... | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products | |
| Thermal insulating products for buildings \x96 In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products \x96 Part 1: Specification for the rigid foam dispensed system before installation | |
| Thermal insulating products for buildings \x96 In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products \x96 Part 1: Specification for the rigid foam spray system before installation | |
| Thermal insulation materials and products \x96 In-situ formed expanded clay lightweight aggregate products (LWA) \x96 Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products \x96 In-situ formed expanded clay lightweight aggregate products \x96 Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings \x96 In-situ formed loose-fill mineral wool (MW) products \x96 Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings \x96 In-situ thermal insulation formed from exfoliated vermiculite (EV) products \x96 Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for buildings \x96 In-situ thermal insulation formed from expanded perlite (EP) products \x96 Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems | |
| Thermoplastic and flexible metal pipework for underground installation at petrol filling stations | |
| Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications | |
| Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications | |
| Timber stairs - Terminology | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements | |
| Timber structures \x96 Glued laminated timber and glued solid timber \x96 Requirements | |
| Timber structures \x96 Product requirements for prefabricated structural members assembled with punched metal plate fasteners | |
| Timber structures \x96 Strength graded structural timber with rectangular cross section \x96 Part 1: General requirements | |
| Timber structures \x96 Strength graded structural timber with rectangular cross section \x96 Part 2: Machine grading; additional requirements for initial type testing | |
| Timber structures \x96 Strength graded structural timber with rectangular cross section \x96 Part 2: Machine grading; additional requirements for type testing | |
| Timber structures \x96 Strength graded structural timber with rectangular cross section \x96 Part 3: Machine grading; additional requirements for factory production control | |
| Touch and close fasteners - Cycling procedure for subsequent testing | |
| Touch-and-close fasteners - Behaviour of slit selvedges | |
| Touch-and-close fasteners - Cycling procedure for subsequent testing | |
| Touch-and-close fasteners - Determination of curvature | |
| Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders | |
| Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction | |
| Ultrasonic domestic gas meters | |
| Underground fire hydrants | |
| Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures | |
| Valves for natural gas transportation in pipelines - Performance requirements and tests | |
| Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes | |
| Ventilation for buildings - Chilled ceilings - Testing and rating | |
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area | |
| Ventilation for buildings \x96 Performance testing and installation checks of residential ventilation systems | |
| Water application intensity - Calculation principles and measurement methods | |
| Water conditioning equipment inside buildings \x96 Electrolytic treatment systems with aluminium anodes \x96 Requirements for performance, safety and testing | |
| Water meters - Part 1: General requirements | |
| Water meters - Part 2: Installation and conditions of use | |
| Water meters - Part 3: Test methods and equipment | |
| Water meters \x96 Part 4: Additional functionalities | |
| Water quality - Determination of epichlorohydrin | |
| Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters | |
| Water quality - Sampling of fish with electricity | |
| WC and urinal flushing cisterns | |
| Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials | |
| Wood flooring - Solid softwood floor boards | |
| Wood-based panels \x96 Melamine faced boards for interior uses \x96 Definition, requirements and classification | |
| Wood-based panels \x96 Melamine faced boards for interior uses \x96 Test methods | |
| Wood-based panels for use in construction \x96 Characteristics, evaluation of conformity and marking | |
| Workplace atmospheres \x96 Determination of airborne endotoxins | |
| Zinc and zinc alloys - Secondary raw material |
| << Prev | Next >> |