Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
340
350
360
370
380
390
391
392
393
394
395
396
397
398
399
400
401
402
403
410
420
430
440
450
460
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity - Part 1: Laboratory Conditions | |
| Acoustics - Noise Control Design Procedures for Open Plant | |
| Acoustics Acoustic insulation for pipes, valves and flanges | |
| Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements | |
| Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies | |
| Adhesives - Methods of Preparing Bulk Specimens - Part 1: Two-Part Systems | |
| Adhesives - Methods of Preparing Bulk Specimens - Part 2: Elevated-Temperature -Curing One-Part Systems | |
| Adhesives \x97 Determination of the bond strength of engineering-plastic joints | |
| Aerospace \x97 Characteristics of aircraft electrical systems | |
| Aerospace UNJ threads Gauging | |
| Agricultural irrigation equipment - Part 1: Definition of terms and classification | |
| Agricultural irrigation equipment - Sprinklers Part 2: Design and operation requirements | |
| Agricultural irrigation equipment \x97 Sprinklers Part 3: Characterization of distribution and test methods | |
| Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods | |
| Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report | |
| Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements | |
| Ambient air - Gas phase titration - Calibration of analysers for ozone | |
| Animal and Vegetable Fats and Oils - Detection and Identification of a Volatile Organic Contaminant by GC/MS | |
| Animal feeding stuffs \x97 Enzymatic determination of total starch content Part 2: Method by enzymatic determination with a hexokinase system and potassium hydroxide dispersion | |
| Animal feeding stuffs Enzymatic determination of total starch content | |
| Automation systems and integration - Integration of advanced process control and optimization capabilities for manufacturing systems Part 3: Verification and validation | |
| Automation systems and integration \x97 Integration of advanced process control and optimization capabilities for manufacturing systems Part 1: Framework and functional model | |
| Automation systems and integration \x97 Integration of advanced process control and optimization capabilities for manufacturing systems Part 2: Activity models and information exchange | |
| Back-up pads for vulcanized fibre discs | |
| Banking - Secure File Transfer (Retail) | |
| Belt Drives - Pulleys - Limiting Values for Adjustment of Centres | |
| Bi-Directional and Multi-Directional Fork-Lift Trucks - Stability Tests | |
| Binders for paints and varnishes Determination of turbidity | |
| Building Construction \x97 Service Life Planning Part 4: Service Life Planning using Building Information Modelling | |
| Buildings and Constructed Assets - Service Life Planning - Part 1: General Principles | |
| Buildings and Constructed Assets - Service Life Planning - Part 2: Service Life Prediction Procedures | |
| Buildings and constructed assets - Service life planning Part 10: When to assess functional performance | |
| Buildings and constructed assets - Service-life planning - Part 5: Life-cycle costing | |
| Buildings and constructed assets - Service-life planning Part 8: Reference service life and service-life estimation | |
| Buildings and Constructed Assets Service Life Planning Part 3: Performance Audits and Reviews | |
| Buildings and constructed assets Service life planning Part 6: Procedures for considering environmental impacts | |
| Buildings and constructed assets Service life planning Part 7: Performance evaluation for feedback of service life data from practice | |
| Butter Determination of salt content Potentiometric method | |
| Carbonaceous materials for the production of aluminium - Baked anodes - Determination of the air permeability | |
| Carbonaceous materials for the production of aluminium Cathode block materials Part 1: Determination of the expansion due to sodium penetration with application of pressure | |
| Carbonaceous materials for the production of aluminium Cathode block materials Part 2: Determination of the expansion due to sodium penetration without application of pressure | |
| Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial blood line filters | |
| Cardiovascular Implants and Artificial Organs - Cardiopulmonary Bypass Systems - Arterial Line Blood Filters | |
| Cardiovascular Implants and Artificial Organs - Hard-Shell Cardiotomy/Venous Reservoir Systems (with/without Filter) and Soft Venous Reservoir Bags | |
| Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) | |
| Cereals and cereal products \x97 Determination of ochratoxin A \x97 High performance liquid chromatographic method with immunoaffinity column cleanup and fluorescence detection | |
| Certificate management for financial services Part 1: Public key certificates | |
| Clinical laboratory medicine In vitro diagnostic medical devices Validation of user quality control procedures by the manufacturer | |
| Coal - Determination of forms of sulfur | |
| Coal \x97 Determination of total cadmium | |
| Coal flow properties \x97 Part 1: Bin flow | |
| Coated abrasives - Flap discs | |
| Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 1: Coupling Not for Connection under Pressure | |
| Connections for Fluid Power and General Use - Hydraulic Couplings for Diagnostic Purposes - Part 2: Coupling with M16 x 2 End for Connection Under Pressure | |
| Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality | |
| Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel | |
| Copper and nickel sulfide ores and concentrates - Determination of total chlorine content - Alkaline fusion and potentiometric titration method | |
| Corrosion of Metals and Alloys - Evaluation of Stress Corrosion Cracking by the Drop Evaporation Test | |
| Corrosion of metals and alloys \x97 Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution | |
| Corrosion of metals and alloys Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys | |
| Cosmetics - Analytical methods - Nitrosamines: Detection and determination of N-nitrosodiethanolam ine (NDELA) in cosmetics by HPLC-MS-MS | |
| Cranes - Competency Requirements for Crane Drivers (Operators), Slingers, Signallers and Assessors | |
| Cranes \x97 Safety requirements for loader cranes | |
| Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles | |
| Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method | |
| Dried milk protein products - Determination of nitrogen solubility index | |
| Earth-moving machinery \x97 Lifting and tying-down attachment points \x97 Performance requirements | |
| Earth-moving machinery and mobile road construction machinery - Worksite data exchange Part 1: System architecture | |
| Earth-moving machinery and mobile road construction machinery \x97 Worksite data exchange Part 2: Data dictionary | |
| Earth-moving machinery Safety requirements for remote operator control | |
| Enterprise modelling and architecture - Requirements for enterprise-referenci ng architectures and methodologies | |
| Environmental Tobacco Smoke - Estimation of its Contribution to Respirable Suspended Particles - Determination of Particulate Matter by Ultraviolet Absorbanc and by Fluorescence | |
| Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry | |
| Fatigue test method for transmission precision roller chains and leaf chains | |
| Fibre-reinforced plastic composites \x97 Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach | |
| Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Tensile Strength of Monolithic Ceramics at Room Temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x97 Determination of tensile properties | |
| Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 1: Sampling | |
| Fine-Cut Tobacco and Smoking Articles Made from It - Methods of Sampling, Conditioning and Analysis - Part 2: Atmosphere for Conditioning and Testing | |
| Fine-cut tobacco and smoking articles made from it Methods of sampling, conditioning and analysis Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine,... | |
| Fluid Power Systems and Components - 16mm Square Electrical Connector with Earth Contact - Characteristics and Requirements | |
| Gas analysis Investigation and treatment of analytical bias | |
| Graphic technology - Printing from digital data across multiple technologies Part 1: Principles | |
| Graphic technology \x97 Communication of graphic paper properties | |
| Graphic technology \x97 Method for radius determination of printing cylinders | |
| Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty | |
| Guide for Estimating Uncertainties in Dosimetry for Radiation Processing | |
| Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing | |
| Guide for Use of Radiation-Sensitive Indicators | |
| Guidelines on the Application of ISO 9001:2000 for the Food and Drink Industry | |
| Hanging devices for multiple use with infusion bottles. Requirements and test methods | |
| Hard coal Determination of caking index | |
| Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines | |
| Holding fixtures of cylindrical abrasive sleeves \x97 Part 2: Holding fixtures for stationary machines | |
| Hot-rolled twin-roll cast carbon steel sheet of commercial quality | |
| Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel | |
| Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods | |
| Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails | |
| Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components | |
| Implants for Surgery - Requirements for Production of Forgings | |
| Implants for surgery \x97 Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices | |
| Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements | |
| Industrial automation systems and integration - Industrial manufacturing management data Part 1: General overview | |
| Industrial automation systems and integration - Industrial manufacturing management data Part 42: Time Model | |
| Industrial automation systems and integration - Industrial manufacturing management data Part 44: Information modelling for shop floor data acquisition | |
| Industrial automation systems and integration - Industrial manufacturing management data: Resources usage management Part 32: Conceptual model for resources usage management data | |
| Industrial automation systems and integration \x97 Industrial manufacturing management data Part 31: Resource information model | |
| Industrial automation systems and integration \x97 Industrial manufacturing management data Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange | |
| Industrial Trucks - Specification for Indicator Lights for Container Handling and Grappler Arm Operations | |
| Information and documentation - Codes for the representation of names of scripts | |
| Information and documentation - International Standard Audiovisual Number (ISAN) - Part 2: Version identifier | |
| Information and documentation - International Standard Audiovisual Number (ISAN) Part 1: Audiovisual work identifier | |
| Information and documentation - International Standard Identifier for Libraries and Related Organizations (ISIL) | |
| Information and Documentation - International Standard Musical Work Code (ISWC) | |
| Information and Documentation - Records Management - Part 1: General | |
| Information and documentation - The Dublin Core metadata element set Part 1: Core elements | |
| Information and documentation - The Dublin Core metadata element set Part 2: DCMI Properties and classes | |
| Information and documentation International Standard Audiovisual Number (ISAN) | |
| Information and documentation The Dublin Core metadata element set | |
| Intelligent transport systems (ITS) \x97 Data exchange involving roadside modules communication Part 2: Centre to field device communications using SNMP | |
| Intelligent transport systems - Adaptive Cruise Control systems - Performance requirements and test procedures | |
| Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 1: Framework and architecture | |
| Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 2: Common platform parameters using CALM | |
| Intelligent transport systems - Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated... | |
| Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 5: Generic vehicle information | |
| Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 7: Other applications | |
| Intelligent transport systems \x97 Forward vehicle collision warning systems \x97 Performance requirements and test procedures | |
| Intelligent transport systems \x97 Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) Part 22: Freight vehicle stability monitoring | |
| Intelligent transport systems \x97 Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) Part 23: Tyre pressure monitoring (TPM) | |
| Intelligent transport systems \x97 Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) Part 24: Safety information provisioning | |
| Intelligent transport systems \x97 Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) Part 25: Overhead clearance monitoring | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 6: Regulated applications | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 10: Emergency messaging system/eCall | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 18: ADR (Dangerous Goods) | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 20: Weigh-in-motion monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 21: Monitoring of regulated vehicles using roadside sensors and data collected from the vehicle... | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 9: Remote digital tachograph monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 11: Driver work records | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 12: Vehicle mass monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 14: Vehicle access control | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 15: Vehicle location monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 16: Vehicle speed monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 17: Consignment and location monitoring | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 8: Vehicle access management | |
| Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - General Requirements | |
| Iron ores - Determination of nickel - Flame atomic absorption spectrometric method | |
| Iron ores Determination of chromium content Flame atomic absorption spectrometric method | |
| Irrigation equipment \x97 Irrigation sprinklers Part 4: Test methods for durability | |
| Leather \x97 Vocabulary | |
| Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HETG, HEPG, HEES and HEPR | |
| Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration Part 1: Measurement and evaluation | |
| Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration | |
| Medical devices - Symbols to be used with medical device labels, labelling, and information to be supplied Part 2: Symbol development, selection and validation | |
| Medical laboratories Requirements for safety | |
| Metallic and Other Inorganic Coatings - Electrochemical Measurement of Diffusible Hydrogen in Steels - Barnacle Electrode Method | |
| Metallic and other inorganic coatings - Electrodeposited zinc alloys with nickel, cobalt or iron | |
| Metallic and Other Inorganic Coatings - Electropolishing as a Means of Smoothing and Passivating Stainless Steel | |
| Metallic materials \x97 Tube ring hydraulic pressure test | |
| Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices | |
| Microbeam analysis Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Mesophilic Lactic Acid Bacteria - Colony-Count Technique at 30 Degrees Celsius | |
| Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions | |
| Milk and milk products - Calf rennet and adult bovine rennet - Determination by chromatography of chymosin and bovine pepsin contents | |
| Milk and milk products \x97 Microbial coagulants \x97 Determination of total milk-clotting activity | |
| Milk fat - Determination of the fatty acid composition by gas-liquid chromatography | |
| Milk fat - Preparation of fatty acid methyl esters | |
| Milk, milk products, infant formula and adult nutritionals \x97 Determination of minerals and trace elements \x97 Inductively coupled plasma atomic emission spectrometry (ICP-AES) method | |
| Natural Gas - Designation of the Quality of Natural Gas for Use as a Compressed Fuel for Vehicles | |
| Natural gas - Energy determination | |
| Non-destructive testing \x97 Radiation methods for computed tomography Part 1: Terminology | |
| Non-destructive testing \x97 Radiation methods for computed tomography Part 2: Principles, equipment and samples | |
| Non-destructive testing \x97 Radiation methods for computed tomography Part 3: Operation and interpretation | |
| Non-destructive testing \x97 Radiation methods for computed tomography Part 4: Qualification | |
| Nuclear energy \x97 Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets \x97 Inert gas extraction and conductivity detection method | |
| Nuclear fuel technology \x97 Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part 1: Samples containing... | |
| Nuclear fuel technology \x97 Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part 2: Samples containing... | |
| Ophthalmic Instruments - Endoilluminators - Fundamental Requirements and Test Methods for Optical Radiation Safety | |
| Optics and Optical Instruments - Microscopes - Testing of Stereomicroscopes | |
| Optics and Optical Instruments - Quality Evaluation of Optical Systems - Assessing the Image Quality Degradation Due to Chromatic Aberrations | |
| Optics and optical instruments \x97 Measurement of reflectance of plane surfaces and transmittance of plane parallel elements | |
| Optics and optical instruments. Optical transfer function. Principles of measurement of modular transfer function (MTF) of sampled imaging systems | |
| Optics and photonics Diffractive optics Vocabulary | |
| Packaging - Bar Code and Two-Dimensional Symbols for Shipping, Transport and Receiving Labels | |
| Packaging - Steel Drums - Part 1: Removable Head (Open Head) Drums with a Minimum Total Capacity of 208 1, 210 1 and 216,51 | |
| Packaging - Steel Drums - Part 2: Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 212 1, 216,5 1 and 230 1 | |
| Packaging - Steel Drums - Part 3: Inserted Flange-Type Closure Systems | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract | |
| Paints and Varnishes - Friction-Reduction Coatings for the Interior of On- and Offshore Steel Pipelines for Non-Corrosive Gases | |
| Paints and varnishes Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution | |
| Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets | |
| Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method | |
| Paper and board - Determination of z-directional tensile strength | |
| Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems | |
| Petroleum and natural gas industries - Factory bends, fittings and flanges for pipeline transportation systems Part 2: Fittings | |
| Petroleum and natural gas industries - Factory bends, fittings and flanges for pipeline transportation systems Part 3: Flanges | |
| Petroleum and Natural Gas Industries - Life Cycle Costing - Part 1: Methodology | |
| Petroleum and Natural Gas Industries - Life Cycle Costing - Part 3: Implementation Guidelines | |
| Petroleum and Natural Gas Industries - Life-Cycle Costing - Part 2: Guidance on Application of Methodology and Calculation Methods | |
| Petroleum and Natural Gas Industries - Offshore Production Installations - Requirements and Guidelines for Emergency Response | |
| Petroleum and natural gas industries \x97 Factory bends, fittings and flanges for pipeline transportation systems Part 4: Factory cold bends | |
| Petroleum and natural gas industries \x97 Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends | |
| Petroleum and natural gas industries \x97 Piping | |
| Petroleum and related products \x97 Determination of chlorine and bromine content \x97 Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines | |
| Petroleum, petrochemical and natural gas industries \x97 Cathodic protection of pipeline systems Part 1: On-land pipelines | |
| Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time | |
| Photography Electronic still-picture imaging Noise measurements | |
| Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices | |
| Pipework - Metal Bellows Expansion Joints - General | |
| Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods | |
| Plastics - Determination of Tension-Tension Fatigue Crack Propagation - Linear Elastic Fracture Mechanics (LEFM) Approach | |
| Plastics - Determination of Water Content | |
| Plastics - Polymer Dispersions - Determination of Free Formaldehyde | |
| Plastics \x97 Film and sheeting \x97 Determination of water vapour transmission rate Part 5: Pressure sensor method | |
| Plastics \x97 Film and sheeting \x97 Determination of water vapour transmission rate Part 6: Atmospheric pressure ionization mass spectrometer method | |
| Plastics \x97 Film and sheeting \x97 Determination of water vapour transmission rate Part 7: Calcium corrosion method | |
| Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance | |
| Plastics Methods for marine exposure | |
| Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces | |
| Pneumatic fluid power - Cylinders - Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm | |
| Pneumatic Fluid Power - Five-Port Directional Control Valves, Sizes 18 mm and 26 mm - Part 1: Mounting Interface Surfaces without Electrical Connector | |
| Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector | |
| Pneumatic fluid power Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm Basic, mounting and accessories dimensions | |
| Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption | |
| Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption | |
| Powered Industrial Trucks - Safety Signs and Hazard Pictorials - General Principles | |
| Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory | |
| Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing | |
| Practice for Dosimetry in an Electron-Beam Facility for Radiation Processing at Energies between 300 keV and 25 MeV | |
| Practice for Dosimetry in an Electron-Beam Facility for Radiation Processing at Energies between 80 keV and 300 keV | |
| Practice for Dosimetry in an X-ray (Bremsstrahlung) Facility for Radiation Processing | |
| Practice for Dosimetry in Electron and Bremsstrahlung Irradiation Facilities for Food Processing | |
| Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing | |
| Practice for Use of a Ceric-Cerous Sulfate Dosimetry System | |
| Practice for Use of a Dichromate Dosimetry System | |
| Practice for Use of a Polymethylmethacryla te Dosimetry System | |
| Practice for Use of a Radiochromic Film Dosimetry System | |
| Practice for Use of a Radiochromic Liquid Dosimetry System | |
| Practice for Use of a Radiochromic Optical Waveguide Dosimetry System | |
| Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations | |
| Practice for Use of Cellulose Acetate Dosimetry System | |
| Practice for Use of the Alanine-EPR Dosimetry System | |
| Practice for Use of the Ethanol-Chlorobenzen e Dosimetry System | |
| Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) | |
| Project management guidelines for terminology standardization | |
| Pulps - Determination of Zero-Span Tensile Strength, Wet or Dry | |
| Radio frequency identification of animals \x97 Standardization of injection sites for different animal species Part 1: Companion animals (cats and dogs) | |
| Radio frequency identification of animals \x97 Standardization of injection sites for different animal species Part 2: Equine (horses, donkeys and zebras) | |
| Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities | |
| Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets | |
| Reciprocating internal combustion engines \x97 Measurement method for exhaust silencers \x97 Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio | |
| Recycled Pulps - Estimation of Stickies and Plastics - Part 1: Visual Method | |
| Recycled pulps - Estimation of stickies and plastics Part 3: Determination and identification by applying near-infrared measurement | |
| Recycled pulps \x97 Estimation of Stickies and Plastics Part 2: Image analysis method | |
| Recycled pulps. Estimation of stickies and plastics. Visual method | |
| Recycled pulps. Estimation of visible contraries by instrumental means using reflected light | |
| Reinforced Plastics - Determination of the In-Plane Shear Modulus by the Plate Twist Method | |
| Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications | |
| Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications | |
| Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications | |
| Road construction and maintenance equipment \x97 Chippings spreaders \x97 Terminology and commercial specifications | |
| Road construction and maintenance equipment \x97 Paver-finishers \x97 Commercial specifications | |
| Road Construction and Maintenance Equipment Bituminous Binder Spreaders/Sprayers Terminology and Commercial Specifications | |
| Road Construction and Maintenance Equipment Road Milling Machinery Terminology and Commercial Specifications | |
| Road transport and traffic telematics - Dedicated short range communication (DSRC) - DSRC application layer | |
| Road vehicles - Brake lining friction materials - Product definition and quality assurance | |
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD) | |
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods | |
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve | |
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 10: Gas-flow adjuster | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 13: Pressure relief device (PRD) | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 14: Excess flow valve | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 16: Rigid fuel line in stainless steel | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 17: Flexible fuel line | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 18: Filter | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 19: Fittings | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 21: Discharge line closures | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 4: Manual valve | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 6: Automatic valve | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 8: Pressure indicator | |
| Road vehicles - Compressed natural gas (CNG) fuel system components Part 9: Pressure regulator | |
| Road vehicles - Compressed natural gas (CNG) fuel systems Part 1: Safety requirements | |
| Road vehicles - Compressed natural Part 1: Safety requirements | |
| Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Terminology and rationale | |
| Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems | |
| Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Electronic subsystems | |
| Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 4: User\x92s manual | |
| Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 1: General information and use case definition | |
| Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 2: Transport protocol and network layer services | |
| Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems | |
| Road vehicles - Engine test code - Net power | |
| Road vehicles - Vehicle to grid communication interface Part 1: General information and use-case definition | |
| Road vehicles - Vehicle to grid communication interface Part 9: Physical and data link layer conformance test for wireless communication | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 11: Gas/air mixer | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 12: Pressure relief valve (PRV) | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 15: Gas-tight housing and ventilation hose | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 1: General requirements and definitions | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 20: Rigid fuel line in material other than stainless steel | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 23: Gas temperature sensor | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 7: Gas injector | |
| Road vehicles \x97 Compressed natural gas (CNG) fuel systems Part 2: Test methods | |
| Road vehicles \x97 Diagnostic communication over Controller Area Network (DoCAN) Part 5: Specification for an in-vehicle network connected to the diagnostic link connector | |
| Road vehicles \x97 Offset frontal impact test procedure | |
| Road vehicles \x97 Vehicle to grid communication interface Part 3: Physical and data link layer requirements | |
| Road vehicles \x97 Vehicle to grid communication interface Part 4: Network and application protocol conformance test | |
| Road vehicles \x97 Vehicle to grid communication interface Part 5: Physical layer and data link layer conformance test | |
| Road vehicles \x97 Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communication | |
| Road vehicles \x97 Vehicle-to- Grid Communication Interface Part 2: Network and application protocol requirements | |
| Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation | |
| Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface | |
| Rolling bearings - Symbols for physical quantities | |
| Rolling Bearings - Symbols for Quantities | |
| Rolling bearings - Thermal speed rating - Calculation and coefficients | |
| Rolling bearings Damage and failures Terms, characteristics and causes | |
| Rolling bearings Measuring methods for vibration Part 1: Fundamentals | |
| Rolling bearings Measuring methods for vibration Part 2: Radial ball bearings with cylindrical bore and outside surface | |
| Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface | |
| Rubber - Determination of Frictional Properties | |
| Rubber and Rubber Additives - Determination of Total Nitrogen Content Using an Automatic Analyser | |
| Rubber and rubber additives - Determination of total sulfur content using an automatic analyser | |
| Rubber compounding ingredients Carbon black Determination of aggregate size distribution by disc centrifuge photosedimentometry | |
| Ships and Marine Technology - Bulk Carriers - Construction Quality of Hull Structure | |
| Ships and Marine Technology - Bulk Carriers - Repair Quality of Hull Structure | |
| Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench | |
| Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods | |
| Ships and Marine Technology - Fire-Extinguishing Systems for Protection of Galley Deep-Fat Cooking Equipment Fire Tests | |
| Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification | |
| Ships and Marine Technology - Gas Inflation Systems for Inflatable Life-Saving Appliances | |
| Ships and marine technology - Gasketed mechanical couplings for use in piping systems - Performance specification | |
| Ships and Marine Technology - Guidelines for Implementation of a Fleet Management System Network | |
| Ships and marine technology - Hydrostatic release units | |
| Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers | |
| Ships and marine technology - Launching appliances for davit-launched lifeboats | |
| Ships and marine technology - Low-location lighting (LLL) on passenger ships - Arrangement | |
| Ships and marine technology - Maritime standards list | |
| Ships and Marine Technology - Pressure/Vacuum Valves for Cargo Tanks | |
| Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications | |
| Ships and marine technology \x97 Inflatable rescue boats \x97 Coated fabrics for inflatable chambers | |
| Ships and marine technology \x97 Pyrotechnic life-saving appliances \x97 Testing, inspection and marking of production units | |
| Ships and marine technology Low-location lighting on passenger ships Arrangement | |
| Silk \x97 Electronic test method for defects and evenness of raw silk | |
| Soil quality - Characterization of excavated soil and other soil materials intended for re-use | |
| Soil quality - Characterization of soil with respect to human exposure | |
| Soil quality - Format for recording soil and site information | |
| Soil quality Characterization of soil related to groundwater protection | |
| Soil quality Guidance on the ecotoxicological characterization of soils and soil materials | |
| Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions | |
| Solid mineral fuels Determination of total mercury content of coal | |
| Solid mineral fuels Evaluation of the measurement performance of on-line analysers | |
| Space data and information transfer systems - Cross support reference model - Space link extension services | |
| Space data and information transfer systems - Lossless data compression | |
| Space data and information transfer systems - Space communications protocol specification (SCPS) - Transport protocol (SCPS-TP) | |
| Space data and information transfer systems Data description language EAST specification | |
| Space environment (natural and artificial) Galactic cosmic ray model | |
| Space systems - Contamination and cleanliness control | |
| Space systems - Fluid characteristics, sampling and test methods - Part 10: Water | |
| Space systems - Fluid characteristics, sampling and test methods - Part 13: Breathing air | |
| Space systems - Fluid characteristics, sampling and test methods - Part 1: Oxygen | |
| Space systems - Fluid characteristics, sampling and test methods - Part 2: Hydrogen | |
| Space systems - Fluid characteristics, sampling and test methods - Part 3: Nitrogen | |
| Space systems - Fluid characteristics, sampling and test methods - Part 4: Helium | |
| Space systems - Fluid characteristics, sampling and test methods - Part 5: Nitrogen tetroxide propellants | |
| Space systems - Fluid characteristics, sampling and test methods - Part 6: Monomethylhydrazine propellant | |
| Space systems - Fluid characteristics, sampling and test methods - Part 7: Hydrazine propellant | |
| Space systems - Fluid characteristics, sampling and test methods - Part 8: Kerosine propellant | |
| Space systems - Fluid characteristics, sampling and test methods - Part 9: Argon | |
| Space systems - Gas contamination - Measurement methods for field tests | |
| Space systems - General test methods for space craft, subsystems and units | |
| Space systems - Launch-vehicle-to-sp acecraft flight environments telemetry data processing | |
| Space systems - Qualification assessment | |
| Space systems - Space environment - Simulation guidelines for radiation exposure of non-metallic materials | |
| Space systems - Spacecraft-to-launch vehicle interface control document | |
| Space systems \x97 Fluid characteristics, sampling and test methods \x97 Part 11: Ammonia | |
| Space systems \x97 Fluid characteristics, sampling and test methods \x97 Part 12: Carbon dioxide | |
| Space systems Flight-to-ground umbilicals | |
| Spatial Distribution of Daylight - CIE Standard Overcast Sky and Clear Sky | |
| Specification for diagrams for process industry Part 1: General rules | |
| Specifications for diagrams for process industry Part 2: Measurement and control | |
| Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas | |
| Stainless steels - Chemical composition | |
| Stationary source emissions - Sampling and determination of gaseous fluoride content | |
| Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method After Combustion in an Induction Furnace (Routine Method) | |
| Steel forgings \x97 Testing frequency, sampling conditions and test methods for mechanical tests | |
| Stereomicroscopes \x97 Information provided to the user | |
| Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters | |
| Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters | |
| Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales | |
| Sustainability in building construction - General Principles | |
| Technical drawings - Simplified representation and dimensioning of holes | |
| Technical product documentation \x97 Heat-treated ferrous parts \x97 Presentation and indications | |
| Textiles Industrial washing and finishing procedures for testing of workwear | |
| Tobacco - Determination of nitrate content - Continuous-flow analysis method | |
| Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method | |
| Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method | |
| Tobacco Determination of nitrate content Continuous-flow analysis method | |
| Tobacco Determination of the content of reducing carbohydrates Continuous-flow analysis method | |
| Tobacco Determination of the content of reducing substances Continuous-flow analysis method | |
| Tobacco Determination of the content of total alkaloids as nicotine Continuous-flow analysis method | |
| Tools for Moulding - Thermal Insulating Sheets for Injection Moulds | |
| Tracked Changes (Redline) - Acoustics - Acoustic insulation for pipes, valves and flanges | |
| Tracked Changes (Redline) - Adhesives \x97 Determination of the bond strength of engineering-plastic joints | |
| Tracked Changes (Redline) - Belt drives \x97 Pulleys \x97 Limiting values for adjustment of centres | |
| Tracked Changes (Redline) - Coal - Determination of forms of sulfur | |
| Tracked Changes (Redline) - Coal - Determination of total cadmium | |
| Tracked Changes (Redline) - Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality | |
| Tracked Changes (Redline) - Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing | |
| Tracked Changes (Redline) - Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles... | |
| Tracked Changes (Redline) - Graphic technology - Printing from digital data across multiple technologies - Part 1: Principles | |
| Tracked Changes (Redline) - Guidance on characterization of excavated soil and other materials intended for re-use | |
| Tracked Changes (Redline) - Hard coal \x97 Determination of caking index | |
| Tracked Changes (Redline) - Hot-rolled twin-roll cast steel sheet of commercial quality | |
| Tracked Changes (Redline) - Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel | |
| Tracked Changes (Redline) - Industrial trucks \x97 Specifications for indicator lights for container handling and grappler arm operations | |
| Tracked Changes (Redline) - Information and documentation - International Standard Audiovisual Number (ISAN) - Part 2: Version identifier | |
| Tracked Changes (Redline) - Information and documentation - International Standard Musical Work Code (ISWC) | |
| Tracked Changes (Redline) - Information and documentation \x97 International Standard Audiovisual Number (ISAN) \x97 Part 1: Audiovisual work identifier | |
| Tracked Changes (Redline) - Information and documentation \x97 International standard identifier for libraries and related organizations (ISIL) | |
| Tracked Changes (Redline) - Information and documentation \x97 Records management Part 1: Concepts and principles | |
| Tracked Changes (Redline) - Intelligent transport systems \x97 Data exchange involving roadside modules communication \x97 Part 2: Centre to field device communications using Simple Network Management Protocol (SNMP) | |
| Tracked Changes (Redline) - Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration - Part 1: Measurement and evaluation | |
| Tracked Changes (Redline) - Medical laboratories \x97 Requirements for safety | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy - Factory bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends | |
| Tracked Changes (Redline) - Optics and photonics \x97 Measurement of reflectance of plane surfaces and transmittance of plane parallel elements | |
| Tracked Changes (Redline) - Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersiv e X-ray fluorescenece spectrometry | |
| Tracked Changes (Redline) - Photography \x97 Digital still cameras \x97 Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag | |
| Tracked Changes (Redline) - Plastics - Polymer dispersions - Determination of free formaldehyde | |
| Tracked Changes (Redline) - Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line | |
| Tracked Changes (Redline) - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy Part 4: User's manual | |
| Tracked Changes (Redline) - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems | |
| Tracked Changes (Redline) - Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Mechanical requirements for electronic subsystems | |
| Tracked Changes (Redline) - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 4: Requirements for emissions-related systems | |
| Tracked Changes (Redline) - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 5: Specification for an in-vehicle network connected to the diagnostic link connector | |
| Tracked Changes (Redline) - Road vehicles \x97 Compressed natural gas (CNG) fuel system components \x97 Part 13: Pressure relief device (PRD) | |
| Tracked Changes (Redline) - Road vehicles \x97 Design and performance specifications for the WorldSID 50th percentile male side-impact dummy \x97 Part 1: Terminology and rationale | |
| Tracked Changes (Redline) - Rolling bearings - Damage and failures - Terms, characteristics and causes | |
| Tracked Changes (Redline) - Rolling bearings - Measuring methods for vibration Part 1: Fundamentals | |
| Tracked Changes (Redline) - Rolling bearings - Measuring methods for vibration Part 2: Radial ball bearings with cylindrical bore and outside surface | |
| Tracked Changes (Redline) - Rolling bearings - Measuring methods for vibration Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface | |
| Tracked Changes (Redline) - Rubber and rubber products \x97 Determination of total sulfur content using an automatic analyser | |
| Tracked Changes (Redline) - Ships and marine technology - Maritime safety - Gas inflation systems for inflatable life-saving appliances | |
| Tracked Changes (Redline) - Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials | |
| Tracked Changes (Redline) - Solid mineral fuels - Determination of total mercury content of coal | |
| Tracked Changes (Redline) - Space systems - Contamination and cleanliness control | |
| Tracked Changes (Redline) - Space systems \x97 Flight-to-ground umbilicals | |
| Tracked Changes (Redline) - Space systems \x97 General test methods for spacecraft, subsystems and units | |
| Tracked Changes (Redline) - Steel sheet, twin-roll cast, zinc-coated by the continuous hot-dip process, of structural quality and high strength | |
| Tracked Changes (Redline) - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres | |
| Tracked Changes (Redline) \x96 Aerospace \x97 UNJ threads \x97 Gauging | |
| Tracked Changes (Redline) \x96 Buildings and constructed assets \x97 Service life planning Part 5: Life-cycle costing | |
| Tracked Changes (Redline) \x96 Buildings and constructed assets \x97 Service life planning Part 7: Performance evaluation for feedback of service life data from practice | |
| Tracked Changes (Redline) \x96 Cardiovascular implants and artificial organs \x97 Cardiopulmonary bypass systems \x97 Arterial blood line filters | |
| Tracked Changes (Redline) \x96 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry | |
| Tracked Changes (Redline) \x96 Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 18: ADR (Dangerous Goods) | |
| Tracked Changes (Redline) \x96 Internal combustion engines \x97 Determination and method for the measurement of engine power \x97 General requirements | |
| Tracked Changes (Redline) \x96 Lubricants, industrial oils and related products (class L) \x97 Family H (Hydraulic systems) \x97 Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR | |
| Tracked Changes (Redline) \x96 Packaging \x97 Bar code and two-dimensional symbols for shipping, transport and receiving labels | |
| Tracked Changes (Redline) \x96 Paints and varnishes \x97 Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases | |
| Tracked Changes (Redline) \x96 Photography \x97 Electronic still-picture imaging \x97 Noise measurements | |
| Tracked Changes (Redline) \x96 Plastics \x97 Methods for marine exposure | |
| Tracked Changes (Redline) \x96 Pneumatic fluid power \x97 Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm \x97 Basic, mounting and accessories... | |
| Tracked Changes (Redline) \x96 Road vehicles \x97 Compressed natural gas (CNG) fuel system components Part 2: Performance and general test methods | |
| Tracked Changes (Redline) \x96 Road vehicles \x97 Compressed natural gas (CNG) fuel systems Part 1: Safety requirements | |
| Tracked Changes (Redline) \x96 Road vehicles \x97 Diagnostic communication over Controller Area Network (DoCAN) Part 2: Transport protocol and network layer services | |
| Tracked Changes (Redline) \x96 Rolling bearings \x97 Thermal speed rating \x97 Calculation | |
| Tracked Changes (Redline) \x96 Ships and marine technology \x97 Fire-extinguishing systems for protection of galley cooking equipment | |
| Tracked Changes (Redline) \x96 Ships and marine technology \x97 Pressure/vacuum valves for cargo tanks | |
| Tracked Changes (Redline) \x96 Surface chemical analysis \x97 Auger electron spectroscopy \x97 Description of selected instrumental performance parameters | |
| Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres | |
| Urine-Absorbing Aids - General Guidance on Evaluation | |
| UV-C devices - Measurement of the output of a UV-C lamp | |
| Vibration and shock generating systems - Vocabulary | |
| Vibration and shock generating systems Vocabulary | |
| Water Quality - Determination of Chloride by Flow Analysis (CFA and FIA) and Photometric or Potentiometric Detection | |
| Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method | |
| Water quality \x97 Determination of selected parameters by discrete analysis systems Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection | |
| Water quality \x97 Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water | |
| Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 1: Method by flow injection analysis (FIA) | |
| Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) | |
| Water quality On-line sensors/analysing equipment for water Specifications and performance tests | |
| Workplace Air - Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry - Part 1: Sampling | |
| Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis | |
| Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation | |
| Workplace atmospheres. Controlling and characterizing errors in weighing collected aerosols | |
| Zinc sulfide concentrates \x97 Determination of silver content \x97 Acid dissolution and flame atomic absorption spectrometric method |
| << Prev | Next >> |