Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
340
350
360
370
380
390
397
398
399
400
401
402
403
404
405
406
407
408
409
410
420
430
440
450
460
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| (FAULTY STANDARD) Packaging \x97 Vocabulary Part 2: Packaging and the environment terms | |
| Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports | |
| Adventure tourism \x97 Good practices for sustainability \x97 Requirements and recommendations | |
| Adventure tourism \x97 Information for participants | |
| Adventure tourism \x97 Leaders \x97 Personnel competence | |
| Adventure tourism \x97 Safety management systems \x97 Requirements | |
| Air cargo unit load devices - Performance requirements and test parameters | |
| Aircraft \x97 LED based taxiing lightsystem \x97 General requirements | |
| Aircraft \x97 Smart contactor \x97 General requirements | |
| Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Part 1: Main-line aircraft | |
| Aircraft ground equipment Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Part 2: Regional aircraft | |
| Aluminium and aluminium alloys - Chemical composition | |
| Aluminium and aluminium alloys - Wrought products - Temper designations | |
| Anaesthetic and respiratory equipment \x97 Passive humidifiers | |
| Animal and vegetable fats and oils \x97 Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICPOES) | |
| Animal feeding stuffs \x97 Vocabulary | |
| Artichokes \x97 Specification and test methods | |
| Asparagus \x97 Specification and test methods | |
| Automatic milking installations - Requirements and testing | |
| Automotive LPG components - Containers | |
| Biogas \x97 Biogas production, conditioning, upgrading and utilization \x97 Terms, definitions and classification scheme | |
| Biotechnology - Ancillary materials present during the production of cellular therapeutic products and gene therapy products | |
| Biotechnology - Cell counting Part 2: Experimental design and statistical analysis to quantify counting method performance | |
| Biotechnology - Massively parallel sequencing Part 1: Nucleic acid and library preparation | |
| Biotechnology - Massively parallel sequencing Part 2: Quality evaluation of sequencing data | |
| Biotechnology - Massively parallel sequencing Part 3: General requirements and guidance for metagenomics | |
| Biotechnology - Nucleic acid synthesis Part 2: Requirements for the production and quality control of synthesized gene fragments, genes, and genomes | |
| Biotechnology - Requirements for evaluating the performance of quantification methods for nucleic acid target sequences - qPCR and dPCR | |
| Biotechnology \x97 Biobanking \x97 General requirements for biobanking | |
| Biotechnology \x97 Bioprocessing \x97 General requirements for the design of packaging to contain cells for therapeutic use | |
| Biotechnology \x97 Cell counting Part 1: General guidance on cell counting methods | |
| Biotechnology \x97 Nucleic acid synthesis Part 1: Requirements for the production and quality control of synthesized oligonucleotides | |
| Biotechnology \x97 Requirements for data formatting and description in the life sciences | |
| Brand evaluation \x97 Principles and fundamentals | |
| Brand evaluation Part 1: Principles and fundamentals | |
| Brand evaluation Part 2: Implementation and reporting | |
| Brand evaluation Part 3: Guidelines for brands related to geographical indications | |
| Brown coals and lignites - Determination of the volatile matter in the analysis sample: one furnace method | |
| Carbon based films - Classification and designations | |
| Carbon Footprint for seafood - Product category rules (CFP-PCR) for macroalgae | |
| Catheter systems for neuraxial application \x97 Sterile and single-use catheters and accessories | |
| Cigarettes - Determination of carbon monoxide in sidestream smoke - Method using a routine analytical linear smoking machine equipped with a fishtail chimney | |
| Cigarettes - Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke - Method using a routine analytical linear smoking machine equipped with a fishtail chimney | |
| Cigarettes - Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime | |
| Cigarettes \x97 Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime | |
| Cigarettes \x97 Routine analytical cigarette smoking machine \x97 Definitions and standard conditions with an intense smoking regime | |
| Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film | |
| Coal preparation \x97 Determination of dust/moisture relationship for coal | |
| Coding for radio frequency identification (RFID) tyre tags | |
| Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method | |
| Condition monitoring and diagnostics of machine systems \x97 Electrical signature analysis of three-phase induction motors | |
| Conformance test methods for RFID enabled tyres | |
| Construction and installation of ductile iron pipeline system | |
| Cork stoppers - Determination of oxidizing residues - Iodometric titration method | |
| Cork stoppers - Determination of releasable 2, 4, 6-trichloroanisol (TCA) | |
| Cornelian cherry - Specification and test methods | |
| Cosmetics Microbiology Enumeration and detection of aerobic mesophilic bacteria | |
| Cosmetics Microbiology General instructions for microbiological examination | |
| Cranes \x97 Proof of competence of steel structures | |
| Cryogenic vessels - Cryogenic insulation performance | |
| Cryogenic vessels - Gas/materials compatibility | |
| Cryogenic vessels - Hoses | |
| Cryogenic vessels - Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing | |
| Cryogenic vessels - Pilot operated pressure relief devices Part 4: Pressure-relief accessories for cryogenic service | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 2: Non-reclosable pressure-relief devices | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination | |
| Cryogenic vessels - Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests | |
| Cryogenic vessels - Valves for cryogenic service | |
| Cryogenic vessels \x97 Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests | |
| Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing | |
| Dentistry \x97 Pre-capsulated dental amalgam | |
| Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS) | |
| Digital cameras \x97 Measurement method for image stabilization performance Part 1: Optical systems | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft Part 2: Characterization of instrument response | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudes | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft Part 4: Validation of codes | |
| Dried parsley (Petroselinum crispum) \x97 Specification | |
| E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method | |
| Earth-moving machinery - Safety Part 15: Requirements for compact tool carriers | |
| Earth-moving machinery \x97 Safety Part 10: Requirements for trenchers | |
| Earth-moving machinery \x97 Safety Part 11: Requirements for landfill compactors | |
| Earth-moving machinery \x97 Safety Part 12: Requirements for cable excavators | |
| Earth-moving machinery \x97 Safety Part 13: Requirements for rollers | |
| Earth-moving machinery \x97 Safety Part 1: General requirements | |
| Earth-moving machinery \x97 Safety Part 2: Requirements for dozers | |
| Earth-moving machinery \x97 Safety Part 3: Requirements for loaders | |
| Earth-moving machinery \x97 Safety Part 4: Requirements for backhoe loaders | |
| Earth-moving machinery \x97 Safety Part 5: Requirements for hydraulic excavators | |
| Earth-moving machinery \x97 Safety Part 6: Requirements for dumpers | |
| Earth-moving machinery \x97 Safety Part 7: Requirements for scrapers | |
| Earth-moving machinery \x97 Safety Part 8: Requirements for graders | |
| Earth-moving machinery \x97 Safety Part 9: Requirements for pipelayers | |
| Educational organizations \x97 Management systems for educational organizations \x97 Requirements with guidance for use | |
| Electrically propelled road vehicles \x97 Determination of power for propulsion of hybrid electric vehicle | |
| Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions | |
| Essential oil of cypress (Cupressus sempervirens L.) | |
| Essential oils - General requirements and guidelines for packaging, conditioning and storage | |
| Essential oils - General requirements for labelling and marking of containers | |
| Fatty acid methyl esters (FAME) - Determination of sulfur content - Inductively coupled plasma optical emission spectrometry (ICP-OES) method | |
| Fertilizers and soil conditioners - Determination of total nitrogen by combustion | |
| Fertilizers and soil conditioners \x97 Determination of microamounts of inorganic anions in fertilizers by ion chromatography | |
| Fibre ropes \x97 Electrostatic surface potential measuring method | |
| Fibre-reinforced plastic composites \x97 Determination of laminate of through-thickness properties Part 1: Direct tension and compression tests | |
| Fibre-reinforced plastic composites \x97 Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus | |
| Fibre-reinforced plastic compositess \x97 Determination of laminate through-thickness properties Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for... | |
| Film for wrapping rubber bales - Part 3: Ethylene-propylene-d iene rubber (EPDM), acrylonitrile-butadi ene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) | |
| Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) | |
| Film for wrapping rubber bales Part 2: Natural rubber | |
| Fine bubble technology - General principles for usage and measurement of fine bubbles Part 3: Methods for generating fine bubbles | |
| Fine bubble technology - General principles for usage and measurement of fine bubbles Part 5: Shelled bubble vocabulary | |
| Fine bubble technology - Water treatment applications Part 2: Test methods using Escherichia coli as a test micro-organism | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles Part 1: Terminology | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles Part 2: Categorization of the attributes of fine bubbles | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles Part 4: Terminology related to microbubble beds | |
| Fine bubble technology \x97 Water treatment applications Part 1: Test method for evaluating ozone fine bubble water generating systems by the decolorization of methylene blue | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Determination of light transmittance of ceramic films with transparent substrate | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x97 Determination of tensile properties of tubes | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for determining elastic modulus of thick ceramic coatings at elevated temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for fracture toughness of monolithic ceramic thin plates at room temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Vocabulary | |
| Fine-cut tobacco and smoking articles made from it - Survey and analysis of consumer-made articles | |
| Fire safety engineering - Verification and validation protocol for building fire evacuation models | |
| Fire safety engineering \x97 Active fire protection systems Part 1: General principles | |
| Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries Part 1: General requirements | |
| Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries Part 2: Additional procedures for pipe penetration and cable transit sealing systems | |
| Forensic sciences Part 2: Recognition, recording, collecting, transport and storage of items | |
| Gas analysis \x97 Analytical methods for hydrogen fuel \x97 Proton exchange membrane (PEM) fuel cell applications for road vehicles | |
| Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing | |
| Gas cylinders \x97 Cylinder bundles \x97 Periodic inspection and testing | |
| Gasoline engines with direct fuel injection (GDI engines) \x97 Installation of the high pressure fuel pump to the engine | |
| Glass in building \x97 Determination of the emissivity | |
| Granulated cork \x97 Determination of apparent bulk density | |
| Granulated cork \x97 Size analysis by mechanical sieving | |
| Granulated cork, broken cork and crushed cork \x97 Sampling for the determination of moisture content | |
| Graphic technology - File format for quality control and metadata Part 1: Print requirements eXchange (PRX) | |
| Graphic technology - File format for quality control and metadata Part 2: Print Quality eXchange (PQX) | |
| Graphic technology \x97 Determination of the operating power consumption of digital printing devices | |
| Graphic technology \x97 Measurement and calculation of spot colour tone value | |
| Guidance for performance grading of recovered reverse osmosis (RO) membranes for water reuse | |
| Guidance on unit pricing | |
| Guidelines for health risk assessment and management for non-potable water reuse | |
| Guidelines for in-service inspections for primary coolant circuit components of light water reactors Part 1: Mechanized ultrasonic testing | |
| Guidelines for in-service inspections for primary coolant circuit components of light water reactors Part 2: Magnetic particle and penetrant testing | |
| Guidelines for in-service inspections for primary coolant circuit components of light water reactors Part 3: Hydrostatic testing | |
| Guidelines for in-service inspections for primary coolant circuit components of light water reactors Part 4: Visual testing | |
| Guidelines for in-service inspections for primary coolant circuit components of light water reactors Part 5: Eddy current testing of steam generator heating tubes | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems Part 2: Methodology to evaluate performance of treatment systems on the basis of greenhouse gas emissions | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems Part 3: Ozone treatment technology | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems Part 8: Evaluation of treatment systems based on Life Cycle Cost | |
| Hard coal Sampling of slurries | |
| Health informatics - Health cards - General characteristics | |
| Health informatics Health cards Numbering system and registration procedure for issuer identifiers | |
| Heat treatment \x97 Control of quality | |
| Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming | |
| Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 1: General principles | |
| Hydraulic fluid power \x97 Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique | |
| Hydraulic fluid power \x97 Monitoring the level of particulate contamination of the fluid Part 3: Use of the filter blockage technique | |
| Image technology colour management \x97 Extensions to architecture, profile format and data structure | |
| Implementation of ISO 2113:1996 Reinforcement fibres Woven fabrics Basis for a specification | |
| In vitro diagnostic medical devices \x97 Clinical performance studies using specimens from human subjects \x97 Good study practice | |
| Industrial automation systems and integration \x97 Formal semantic models for the configuration of global production networks | |
| Industrial trucks - Electrical requirements | |
| Infant formula - Determination of nucleotides by liquid chromatography | |
| Infant formula and adult nutritionals - Determination of chromium, selenium and molybdenum - Inductively coupled plasma mass spectrometry (ICP-MS) | |
| Infant formula and adult nutritionals - Determination of myo-inositol by liquid chromatography and pulsed amperometry | |
| Infant formula and adult nutritionals - Determination of pantothenic acid by ultra high performance liquid chromatography and tandem mass spectrometry method (UHPLC-MS/MS) | |
| Infant formula and adult nutritionals - Determination of total iodine - Inductively coupled plasma mass spectrometry (ICP-MS) | |
| Infant formula and adult nutritionals - Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC) | |
| Infant formula and adult nutritionals \x97 Determination of total folate content by trienzyme extraction and ultra high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) | |
| Infant formula and adult nutritionals \x97 Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV) | |
| Infant formula and adult nutritionals \x97 Determination of vitamin D by liquid chromatography-mass spectrometry | |
| Infant formula and adult nutritionals \x97 Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography | |
| Information and documentation - Data exchange protocol for interoperability and preservation | |
| Information and documentation - International Standard Book Number (ISBN) | |
| Information and documentation - International Standard Text Code (ISTC) | |
| Information and documentation - Schema for holdings information | |
| Information and documentation - Transliteration of scripts in use in Thailand Part 1: Transliteration of Akson-Thai-Noi | |
| Information and documentation \x97 Emergency preparedness and response | |
| Information and documentation A reference ontology for the interchange of cultural heritage information | |
| Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments | |
| Inland navigation vessels - Small floating working machines - Requirements and test methods | |
| Instant coffee - Determination of moisture content - Karl Fischer method (Reference method) | |
| Intelligent transport systems - Framework for Green ITS (G-ITS) standards Part 2: Integrated mobile service applications | |
| Intelligent transport systems - Geographic Data Files (GDF) GDF5.1 Part 1: Application independent map data shared between multiple sources | |
| Intelligent transport systems - Roadside modules SNMP data interface Part 1: Overview | |
| Intelligent transport systems \x97 Emergency electronic brake light systems (EEBL) \x97 Performance requirements and test procedures | |
| Intelligent transport systems \x97 Geographic Data Files (GDF) GDF5.1 Part 2: Map data used in automated driving systems, Cooperative ITS, and multimodal transport | |
| Intelligent transport systems \x97 Information for emergency service support via personal ITS station Part 1: General requirements and technical definition | |
| Intelligent transport systems \x97 Partially automated parking systems (PAPS) \x97 Performance requirements and test procedures | |
| Internal combustion engines - Engine weight (mass) declaration | |
| Leather - Full chrome upper leather - Specification and test methods | |
| Leather \x97 Crust full chrome upper leather \x97 Specifications and test methods | |
| Leather Tests for colour fastness Colour fastness to crocking | |
| Legal translation \x97 Requirements | |
| Life cycle analysis and recycling of ductile iron pipes for water applications | |
| Life cycle inventory calculation methodology for steel products | |
| Liming material \x97 Determination of neutralizing value \x97 Titrimetric methods | |
| Liming materials \x97 Determination of size distribution by dry and wet sieving | |
| Machinery for forestry - Forestry mulching equipment - Terms, definitions and commercial specifications | |
| Manually portable (hand-held) powered lawn and garden equipment and forest machinery - Engine performance and fuel consumption | |
| Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content | |
| Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content | |
| Measurement and characterization of particles by acoustic methods - Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy | |
| Measurement and characterization of particles by acoustic methods Part 2: Guidelines for linear theory | |
| Measurement and characterization of particles by acoustic methods Part 3: Guidelines for non-linear theory | |
| Mechanical vibration - Measurement and evaluation of machine vibration Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of... | |
| Mechanical vibration - Measurement and evaluation of machine vibration Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min... | |
| Mechanical vibration - Measurement and evaluation of machine vibration Part 5: Machine sets in hydraulic power generating and pump-storage plants | |
| Mechanical vibration - Measurement and evaluation of machine vibration Part 9: Gear units | |
| Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 1: General guidelines | |
| Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 21: Horizontal axis wind turbines | |
| Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of... | |
| Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings | |
| Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 8: Reciprocating compressor systems | |
| Mechanical vibration Criteria and safeguards for the in-situ balancing of medium and large rotors | |
| Mechanical vibration, shock and condition monitoring \x97 Vocabulary | |
| Medical devices \x97 Information to be supplied by the manufacturer | |
| Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary | |
| Microbeam analysis \x97 Methods of specimen preparation for analysis of general powders using WDS and EDS | |
| Microscopes \x97 Confocal microscopes \x97 Optical data of fluorescence confocal microscopes for biological imaging | |
| Mine closure and reclamation \x97 Vocabulary | |
| Mission operations \x97 MAL space packet transport binding and binary encoding | |
| Molecular biomarker analysis \x97 Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) \x97 General requirements and definitions | |
| Nanotechnologies \x97 Testing the photocatalytic activity of nanoparticles for NADH oxidation | |
| Natural gas - Calculation of thermodynamic properties Part 1: Gas phase properties for transmission and distribution applications | |
| Natural gas - Calculation of thermodynamic properties Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application | |
| Natural gas \x97 Determination of sulfur compounds \x97 Determination of total sulfur content by ultraviolet fluorescence method | |
| Natural gas \x97 Upstream area \x97 Determination of hydrogen sulfide content by laser absorption spectroscopy | |
| Natural rubber latex cleanroom gloves - Specification | |
| Nicotine pouches - Test method for pH | |
| Non-destructive testing \x97 Pulsed eddy current testing of ferromagnetic metallic components | |
| Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability | |
| Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability | |
| Oil of dwarf pine (Pinus mugo Turra) | |
| Online consumer reviews \x97 Principles and requirements for their collection, moderation and publication | |
| Oolong tea \x97 Definition and basic requirements | |
| Optics and photonics - Spectral bands | |
| Optics and photonics - Telescopic systems - Specifications for night vision devices | |
| Optics and photonics \x97 Environmental requirements \x97 Test requirements for telescopic systems | |
| Oxygen reduction systems for fire prevention \x97 Design, installation, planning and maintenance | |
| Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l | |
| Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l | |
| Packaging - Plastics drums - Part 3: Plug/bungs closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l | |
| Packaging - Vocabulary | |
| Packaging \x97 Vocabulary Part 1: General terms | |
| Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body | |
| Paints and varnishes - Determination of stone-chip resistance of coatings Mobile multi-impact testing on a small testing area | |
| Paints and varnishes Determination of stone-chip resistance of coatings Part 1: Multi-impact testing | |
| Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory car-wash | |
| Paper \x97 Requirements for stability for general graphic applications | |
| Performance evaluation of treatment technologies for water reuse systems Part 9: Guidelines and requirements for electro-chlorination | |
| Performance evaluation protocol for digital fitting systems Part 1: Accuracy of virtual human body representation | |
| Performance evaluation protocol for digital fitting systems Part 2: Virtual garment | |
| Performance evaluation protocol for digital fitting systems Part 3: Digital fitting performance - Gap | |
| Performance of buildings \x97 Building enclosure thermal performance verification and commissioning Part 1: General requirements | |
| Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC | |
| Photography - Psychophysical experimental methods for estimating image quality - Part 1: Overview of psychophysical elements | |
| Photography \x97 Lenticular print for changing images \x97 Measurements of image quality | |
| Photography Psychophysical experimental methods for estimating image quality Part 2: Triplet comparison method | |
| Photography Psychophysical experimental methods for estimating image quality Part 3: Quality ruler method | |
| Pigments and extenders \x97 Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods | |
| Plastics - Determination of the transient extensional viscosity of polymer melts | |
| Plastics - Epoxy resins - Determination of 1,2-glycol content | |
| Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimen and determination of properties | |
| Plastics - Test specimens | |
| Plastics - Wood-plastic recycled composites (WPRC) Part 1: Specification | |
| Plastics \x96 Wood-plastic recycled composites (WPRC) \x96 Specification | |
| Plastics \x97 Determination of abrasive wear by reciprocating linear sliding motion | |
| Plastics \x97 Epoxy resins \x97 Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy | |
| Plastics \x97 Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics \x97 Wood-plastic recycled composites (WPRC) Part 2: Test methods | |
| Plastics moulded parts \x97 Tolerances and acceptance conditions | |
| Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm | |
| Priests (caper) (Capparis spp.) \x97 Specification and test methods | |
| Prosthetics and orthotics \x97 Foot orthotics \x97 Uses, functions classification and description | |
| Prosthetics and orthotics \x97 Soft orthoses \x97 Uses, functions, classification and description | |
| Prosthetics and orthotics \x97 Terms relating to the treatment and rehabilitation of persons having a lower limb amputation | |
| Radio frequency identification (RFID) tyre tags - Tyre attachment classification | |
| Radio frequency identification (RFID) tyre tags | |
| Railway applications - Recyclability and recoverability calculation method for rolling stock | |
| Requirements for collection and transport of samples for medical laboratory examinations | |
| Resilient floor coverings \x97 Specification for floor panels/assembly for loose laying | |
| Restrained joint systems for ductile iron pipelines - Calculation rules for lengths to be restrained | |
| Road vehicles - 50 ohms impedance radio frequency connection system interface Part 1: Dimensions and electrical requirements | |
| Road vehicles - 50 ohms impedance radio frequency connection system interface Part 2: Test procedures | |
| Road vehicles - Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems - Test with roller brake tester | |
| Road vehicles - Clock extension peripheral interface (CXPI) Part 2: Application layer | |
| Road vehicles - Clock extension peripheral interface (CXPI) Part 3: Transport and network layer | |
| Road vehicles - Clock extension peripheral interface (CXPI) Part 4: Data link layer and physical layer | |
| Road vehicles - Clock extension peripheral interface (CXPI) Part 6: Transport and network layer conformance test plan | |
| Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access | |
| Road vehicles - In-vehicle Ethernet Part 10: Transport layer and network layer conformance test plans | |
| Road vehicles - In-vehicle Ethernet Part 11: Application layer to session layer conformance test plans | |
| Road vehicles - In-vehicle Ethernet Part 1: General information and definitions | |
| Road vehicles - In-vehicle Ethernet Part 3: Optical 1-Gbit/s physical entity requirements and conformance test plan | |
| Road vehicles - In-vehicle Ethernet Part 4: General requirements and test methods of optical gigabit Ethernet components | |
| Road vehicles - In-vehicle Ethernet Part 5: Optical 1-Gbit/s physical layer system requirements and test plans | |
| Road vehicles - In-vehicle Ethernet Part 6: Electrical 100-Mbit/s physical entity requirements and conformance test plan | |
| Road vehicles - In-vehicle Ethernet Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 15: Excess flow valve | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 17: Gas dosage unit | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 19: Gas-tube pressure relief valves | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 21: Pressure and/or temperature sensors | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 22: Power supply bushing (fuel pump/actuators/fuel level sensor) | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel system components Part 8: Fuel pump | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel systems components Part 12: Non-return valve | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel systems components Part 6: Pressure relief valves (PRV) | |
| Road vehicles - Liquefied petroleum gas (LPG) fuel systems components Part 9: Pressure relieve device (PRD) | |
| Road vehicles - Security certificate management | |
| Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 2: Air over hydraulic... | |
| Road vehicles - Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 2: Application and communication requirements conformance test plan | |
| Road vehicles - Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 3: Data definitions | |
| Road vehicles \x97 Clock extension peripheral interface (CXPI) Part 5: Application layer conformance test plan | |
| Road vehicles \x97 Clock extension peripheral interface (CXPI) Part 7: Data link and physical layer conformance test plan | |
| Road vehicles \x97 Dimethyl Ether (DME) refuelling connector | |
| Road vehicles \x97 Durability test method for starter motor for stop and start system | |
| Road vehicles \x97 Fuse-links with axial terminals for use in 48V networks \x97 Types SF36-70V, SF51-70V and SF56-70V | |
| Road vehicles \x97 In-vehicle Ethernet Part 2: Common physical entity requirements | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 13: Multivalve | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 14: Vaporizer/pressure regulator | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 16: Injectors and gas mixing device/fuel rail | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 24: Gas tubes | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 25: Gas connections | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 4: Level indicator | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 5: Fuel selection system and electrical installations | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel system components Part 7: Remotely controlled service valve with excess flow valvee | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 10: Gas-tight housing | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 11: Manual shut-off valve | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 18: Hose | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 1: General requirements and definitions | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 20: Filter unit | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 2: Performance and general test methods | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 3: 80% stop valve | |
| Road vehicles \x97 Liquefied petroleum gas (LPG) fuel systems components Part 6: Pressure relief valves (PRV) | |
| Road vehicles \x97 Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic braking systems | |
| Road vehicles \x97 Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 1: Application and communication requirements | |
| Rolling bearings - Aligning thrust ball bearings and aligning seat washers - Boundary dimensions | |
| Rolling bearings - Radial bearings, retaining slots - Dimensions and tolerances | |
| Rolling bearings and spherical plain bearings Search structure for electronic media Characteristics and performance criteria identified by attribute vocabulary | |
| Rubber and rubber products \x97 Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials | |
| Rubber compounding ingredients \x97 Precipitated silica \x97 Determination of aggregate size distribution by disc centrifuge | |
| Sensory analysis - Guidance on substantiation for sensory and consumer product claims | |
| Sensory analysis \x97 General guidance for the application of sensory analysis in quality control | |
| Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements | |
| Ships and marine technology - Electric rudder angle indicators | |
| Ships and marine technology - Hopper dredger supervisory and control systems | |
| Ships and marine technology - Marine cranes - Noise limits and measuring method | |
| Ships and marine technology - Marine environment protection - Management and handling of shipboard garbage | |
| Ships and marine technology - Marine environment protection - Testing of ship biofouling in-water cleaning systems | |
| Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 1: Moving water conditions | |
| Ships and marine technology - Marine environment protection: performance testing of oil skimmers Part 2: Static water conditions | |
| Ships and marine technology - Marine environment protection: performance testing of oil skimmers Part 3: High viscosity oil | |
| Ships and marine technology - Maritime port facility security assessments and security plan development | |
| Ships and marine technology - Rate of turn indicators | |
| Ships and marine technology - Thermally toughened safety-glass panes for windows and side scuttles | |
| Ships and marine technology \x97 Cathodic protection of ships | |
| Ships and marine technology \x97 Check valves for use in low temperature applications \x97 Design and testing requirements | |
| Ships and marine technology \x97 Cutter suction dredger supervisory and control systems | |
| Ships and marine technology \x97 Grab dredger supervisory and control systems | |
| Ships and marine technology \x97 Major components of emergency towing arrangements | |
| Ships and marine technology \x97 Marine cranes \x97 Operation and maintenance requirements | |
| Ships and marine technology \x97 Offshore mooring chains | |
| Silk \x97 Test method for determining the size of silk yarns | |
| Soil Quality \x97 Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere | |
| Solid mineral fuels \x97 Determination of total sulfur by Coulomb titration method | |
| Space data and information transfer systems \x97 Digital motion imagery | |
| Space data and information transfer systems \x97 Licklider transmission protocol (LTP) for CCSDS | |
| Space data and information transfer systems \x97 Space communications cross support \x97 Architecture requirements document | |
| Space data and information transfer systems \x97 Spacecraft onboard interface services \x97 Device enumeration service | |
| Space data and information transfer systems Producer-archive interface Methodology abstract standard | |
| Space systems - Detailed space debris mitigation requirements for launch vehicle orbital stages | |
| Space systems - Requirements for small spacecraft | |
| Space systems \x97 Calibration requirements for satellite-based passive microwave sensors | |
| Space systems \x97 Fiber optic components \x97 Design and verification requirements | |
| Space systems \x97 Launch complexes modernization process \x97 General requirements | |
| Spices and condiments \x97 Dried lime (whole, slices and ground) \x97 Specification | |
| Stationary training equipment - Part 1: General safety requirements and test methods | |
| Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods | |
| Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods | |
| Surface chemical analysis - Sample handling, preparation and mounting Part 2: Documenting and reporting the preparation and mounting of specimens for analysis | |
| Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials | |
| Surface chemical analysis \x97 Guidelines to sample handling, preparation and mounting Part 4: Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis | |
| Surface chemical analysis \x97 Sample handling, preparation and mounting Part 1: Documenting and reporting the handling of specimens prior to analysis | |
| Surface chemical analysis \x97 Secondary ion mass spectrometry \x97 Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry | |
| Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak intensities and information required when reporting results | |
| Sustainability in buildings and civil engineering works - Design for disassembly and adaptability - Principles, requirements and guidance | |
| Sustainable procurement \x97 Guidance + Collaborative business relationship management systems \x97 Requirements and framework + Collaborative business relationship management systems \x97 Guide to implementing BS ISO 44001 | |
| Sustainable procurement \x97 Guidance | |
| Synthetic rubber latex - Examination for microorganisms | |
| Technical product documentation \x97 Requirements for digital mock-up virtual assembly test for mechanical products | |
| Textile Floor Coverings - Determination of Thickness Loss under Dynamic Loading | |
| Textiles - Determination of the total heat transfer through textiles in simulated environments | |
| Textiles - Man-Made Fibres - Generic Names | |
| Textiles \x97 Determination of stable nitrogen isotope ratio in cotton fibres | |
| Textiles \x97 Man-made fibres \x97 Determination of dye uptake of cationic dyeable modified polyester fibres | |
| Textiles \x97 Man-made fibres \x97 Determination of shape factors in cross section | |
| Textiles \x97 Qualitative and quantitative proteomic analysis of some animal hair fibres Part 2: Peptide detection using MALDI-TOF MS | |
| Thermal containers - Safety standard for refrigerating systems using flammable refrigerants - Requirements for design and operation | |
| Thermal insulation for building equipment and industrial installations \x97 Aluminosilicate wool products \x97 Specification | |
| Tobacco and tobacco products \x97 Determination of ammonia \x97 Method using ion chromatographic analysis | |
| Tools for pressing \x97 Heel guidings in large stamping and forming dies | |
| Tools for pressing \x97 Spring plungers with helicoidal compression steel spring or gas spring | |
| Tourism and related services \x97 Bareboat charter \x97 Minimum service and equipment requirements | |
| Tracked Changes (Redline) - Air cargo unit load devices \x97 Performance requirements and test parameters | |
| Tracked Changes (Redline) - Brand evaluation - Part 1: Principles and fundamentals | |
| Tracked Changes (Redline) - Cigarettes - Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime | |
| Tracked Changes (Redline) - Cork stoppers - Determination of releasable 2,4,6-trichloroaniso l (TCA) | |
| Tracked Changes (Redline) - Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices | |
| Tracked Changes (Redline) - Cryogenic vessels - Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests | |
| Tracked Changes (Redline) - Cryogenic vessels \x97 Gas/material compatibility | |
| Tracked Changes (Redline) - Cryogenic vessels \x97 Pressure-relief accessories for cryogenic service \x97 Part 1: Reclosable pressure-relief valves | |
| Tracked Changes (Redline) - Educational organizations \x97 Management systems for educational organizations \x97 Requirements with guidance for use | |
| Tracked Changes (Redline) - Essential oils - General requirements and guidelines for packaging, conditioning and storage | |
| Tracked Changes (Redline) - Film for wrapping rubber bales - Part 2: Natural rubber and modified natural rubber | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for optical properties of ceramic phosphors for white light-emitting diodes using an integrating sphere | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Vocabulary | |
| Tracked Changes (Redline) - Hard coal \x97 Sampling of slurries | |
| Tracked Changes (Redline) - Health informatics - Health cards - Numbering system and registration procedure for issuer identifiers | |
| Tracked Changes (Redline) - Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 1: General principles | |
| Tracked Changes (Redline) - Information and documentation - International Standard Book Number (ISBN) | |
| Tracked Changes (Redline) - Information and documentation \x97 A reference ontology for the interchange of cultural heritage information | |
| Tracked Changes (Redline) - Intelligent transport systems - Partially-automated parking systems (PAPS) - Performance requirements and test procedures | |
| Tracked Changes (Redline) - Measurement and characterization of particles by acoustic methods - Part 2: Linear theory | |
| Tracked Changes (Redline) - Mechanical vibration \x97 Measurement and evaluation of machine vibration \x97 Part 21: Horizontal axis wind turbines | |
| Tracked Changes (Redline) - Mechanical vibration \x97 Measurement and evaluation of machine vibration Part 8: Reciprocating compressor systems | |
| Tracked Changes (Redline) - Mechanical vibration, shock and condition monitoring - Vocabulary | |
| Tracked Changes (Redline) - Packaging \x97 Vocabulary Part 1: General terms | |
| Tracked Changes (Redline) - Photography \x97 Lenticular print for changing images \x97 Measurements of image quality | |
| Tracked Changes (Redline) - Plastics - Determination of the transient extensional viscosity of polymer melts | |
| Tracked Changes (Redline) - Plastics \x97 Wood-plastic recycled composites (WPRC) Part 1: Specification | |
| Tracked Changes (Redline) - Reinforcement fibres - Woven fabrics - Requirements and specifications | |
| Tracked Changes (Redline) - Road vehicles \x97 Degrees of protection (IP code) \x97 Protection of electrical equipment against foreign objects, water and access | |
| Tracked Changes (Redline) - Rolling bearings \x97 Radial bearings, retaining slots \x97 Dimensions, geometrical product specifications (GPS) and tolerance values | |
| Tracked Changes (Redline) - Ships and marine technology - Electric rudder angle indicators | |
| Tracked Changes (Redline) - Ships and marine technology - Rate of turn indicators | |
| Tracked Changes (Redline) - Ships and marine technology \x97 Thermally toughened safety glass panes for windows and side scuttles | |
| Tracked Changes (Redline) - Space systems \x97 Launch complexes modernization process \x97 General requirements | |
| Tracked Changes (Redline) - Space systems \x97 Requirements for small spacecraft | |
| Tracked Changes (Redline) - Tools for pressing - Heel guidings in large stamping and forming dies | |
| Tracked Changes (Redline) - Tractors and machinery for agriculture - Speed Identification Sign (SIS) | |
| Tracked Changes (Redline) - Translation, interpreting and related technology - Vocabulary | |
| Tracked Changes (Redline) - Water reuse - Vocabulary | |
| Tracked Changes (Redline) - Water safety signs and beach safety flags - Part 3: Guidance for use | |
| Tracked Changes (Redline) - Wrought aluminium and aluminium alloys - Chemical composition | |
| Tracked Changes (Redline) \x96 Hydraulic fluid power \x97 Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique | |
| Tracked Changes (Redline) \x96 Surface chemical analysis \x97 Auger electron spectroscopy and X-ray photoelectron spectroscopy \x97 Methods used to determine peak intensities and information required when reporting results | |
| Tracked Changes (Redline) Coal and coke - Determination of total sulfur by Coulomb titration method | |
| Tractors and machinery for agriculture and forestry - Speed Identification Sign (SIS) | |
| Traditional Chinese medicine - Coding rules for Chinese medicines in supply chain management | |
| Traditional Chinese medicine - Panax notoginseng root and rhizome | |
| Traditional Chinese medicine - Panax notoginseng seeds and seedlings | |
| Traditional Chinese medicine \x97 Artemisia argyi leaf | |
| Traditional Chinese medicine \x97 Coding system of formulae | |
| Traditional Chinese medicine \x97 Computerized tongue image analysis system Part 2: Light environment | |
| Traditional Chinese medicine \x97 Gua Sha instruments | |
| Traditional Chinese medicine \x97 Infrared moxibustion-like instrument | |
| Traditional Chinese medicine \x97 Skin electrical resistance measurement devices | |
| Traditional Chinese medicine\x97Salvia miltiorrhiza seeds and seedlings | |
| Translation, interpreting and related technology \x97 Vocabulary | |
| Trusted mobile e-document framework \x97 Requirements, functionality and criteria for ensuring reliable and safe mobile e-business | |
| Tyre sound emission test \x97 Methods of drum | |
| Tyre valves \x97 ISO core chambers No. 1, No. 2, No. 3 and No. 4 | |
| Vapour products \x97 Routine analytical vaping machine \x97 Definitions and standard conditions | |
| Vegetable fats and oils - Determination of aflatoxins B1, B2, G1 and G2 by immunoaffinity column clean-up and high-performance liquid chromatograph | |
| Water quality - Determination of acute toxicity of water samples and chemicals to a fish gill cell line (RTgill-W1) | |
| Water quality - Determination of chronic toxicity to Ceriodaphnia dubia | |
| Water quality - Determination of cyclic volatile methylsiloxanes in water Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality \x97 Determination of available weak and dissociable (WAD) cyanide Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection | |
| Water quality \x97 Determination of cyclic volatile methylsiloxanes in water Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) | |
| Water quality \x97 Determination of selected highly volatile organic compounds in water \x97 Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) | |
| Water quality \x97 Plutonium and neptunium \x97 Test method using ICP-MS | |
| Water reuse \x97 Vocabulary | |
| Water reuse in urban areas \x97 Guidelines for centralized water reuse system Part 1: Design principle of a centralized water reuse system | |
| Water reuse in urban areas \x97 Guidelines for centralized water reuse system Part 2: Management of a centralized water reuse system | |
| Water reuse in urban areas \x97 Guidelines for water reuse safety evaluation \x97 Assessment parameters and methods | |
| Water safety signs and beach safety flags - Part 2: Specifications for beach safety flags - Colour, shape, meaning and performance | |
| Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas | |
| Water safety signs and beach safety flags Part 3: Guidance for use | |
| Welding consumables \x97 Rods for gas welding of non-alloy and creep-resisting steels \x97 Classification | |
| Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry | |
| Workplace air \x97 General requirements for the performance of procedures for the measurement of chemical agents |
| << Prev | Next >> |