CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Applicable to carpets the pile of which consists of uniformly spaced tufts and/or loops. Tufts and loops are defined, and the procedure of determination is specified. - Replaces the first... | |
| Applies for the determination of natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The method is applicable to products having an iron... | |
| Applies to dictation machines, transcription machines and to combined dictation and transcription machines. Serves to define role of these machines and to describe elements to ensure their effective operation and... | |
| Concerns cover page and page 1. Modify the title as follows: "Wire, bar and tube drawing dies with hardmetal (carbide) core - Specifications". Modify the first sentence on page 1... | |
| Correct the (E) chemical names on: page 20, chlorprocarb; page 31, dimethrin; page 41, fenitrothion; page 63, parafluron; according to the names given in the amendment. Page 72, simetryn: correct... | |
| Covers pest control chemicals and plant growth regulators of international importance. The standard is presented as a combined English/French text. It gives references to related standards and specifies the principles... | |
| Defines the characteristics of general-purpose unpunched paper cards to be used information interchange between different punched card devices. References: ISO/R534; ISO/R 536; ISO/R 1974; ISO/R 2144; ISO 2493; ISO 2494; | |
| Determination on an undiluted product, at a specified temperature; calculation of the wanted content by means of tables showing the index as a function of composition, concentration and temperature. The... | |
| ISO 16810:2012 defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound. The specific conditions of application and use of ultrasonic examination,... | |
| ISO 16811:2012 specifies the general rules for setting the timebase range and sensitivity (i.e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible... | |
| ISO 16812:2007 specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural... | |
| ISO 16814:2008 is intended to specify methods to express the quality of indoor air suitable for human occupancy, to allow several acceptable target levels of indoor air quality, depending on... | |
| ISO 16817:2017 provides an integrated design process for high-quality indoor visual environment including architectural and engineering aspects of daylighting and lighting systems for user satisfaction, health, well-being and productivity as... | |
| ISO 16818:2008 gives terms and definitions for use in the design of energy efficient buildings. ISO 16818:2007 is applicable to new buildings and retrofitted existing buildings. | |
| ISO 16823:2012 specifies the principles of transmission techniques. Transmission techniques can be used for: a) detection of imperfections; b) determination of attenuation. The general principles required for the use of... | |
| ISO 16826:2012 defines the principles for tandem‑ and longitudinal-longitu dinal-transverse (LLT) wave‑examination for the detection of discontinuities perpendicular to the surface. The general principles required for the ultrasonic examination of... | |
| ISO 16827:2012 specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable,... | |
| ISO 16828:2012 defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can... | |
| ISO 16831:2012 specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound. ISO 16831:2012 covers both direct (digital) reading and waveform display types... | |
| ISO 16832:2006 specifies basic methods for scaling loudness into categories for audiological applications. | |
| ISO 16833:2006 defines criteria that characterise geometrical uniformity of wheels, and describes principles of measurements of these criteria. | |
| ISO 16834:2012 specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal... | |
| ISO 16835:2014 specifies test methods for the thermal expansion of refractory products. It describes a method for determining the linear thermal expansion percentage, the linear thermal expansion curve, and the... | |
| ISO 16839:2013 specifies a method for determining, by test and calculation, the resistance against lateral deformation of steel wire ropes without axial load. It provides a system of testing in... | |
| ISO 1683:2015 specifies reference values used in acoustics, in order to establish a uniform basis for the expression of acoustical and vibratory levels. The reference values are mandatory for use... | |
| ISO 16840-10:2014 specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of non-integrated components of a wheelchair intended to protect tissue integrity. The test... | |
| ISO 16840-1:2006 applies to seating intended to provide postural support within a wheelchair. It specifies: a global coordinate system that permits the determination and recording of a person's posture while... | |
| ISO 16840-2:2018 specifies apparatus, test methods and disclosure requirements for wheelchair seat cushions intended to maintain tissue integrity and prevent tissue trauma. Test conditions simulate a symmetric anatomy and posture... | |
| ISO 16840-3:2014 specifies test methods for the determination of static, impact, and repetitive load strengths as well as disclosure requirements for postural support devices (PSD) with associated attachment hardware intended... | |
| ISO 16840-4:2009 specifies test methods and requirements for design and performance, for instructions and warnings and for product marking and labelling of seating systems intended to be used as a... | |
| ISO 16840-9:2015 specifies apparatus, test methods, and disclosure requirements for generating aging effects in a seat cushion that reproduce those seen in use. It also provides methods of determining changes... | |
| ISO 16841:2014 identifies the different types of pulling eyes prepared at, or attached to, a steel wire rope end for connection to another rope when installing a new rope or... | |
| ISO 16842:2014 specifies the method for measuring the stress-strain curves of sheet metals subject to biaxial tension using a cruciform test piece fabricated from a sheet metal sample. The applicable... | |
| ISO 16844-1:2013 gives the dimensions and tests and requirements for the performance of electrical connectors needed for ensuring the interchangeability of different components of the tachograph systems used for road... | |
| ISO 16844-2:2011 specifies the electrical connection between the recording unit, and the vehicle network and the motion sensor, in tachograph systems used in road vehicles. | |
| ISO 16844-3:2004 specifies the physical and data link layers of the electrical interface connecting a motion sensor to a vehicle unit, used in tachograph systems in road vehicles to perform... | |
| ISO 16844-4:2015 specifies the controller area network (CAN) interface for the interchange of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. | |
| ISO 16844-5:2004 specifies the secured interchange of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. This type of interchange will be... | |
| ISO 16844-6:2014 defines diagnostic communication and services for tachograph systems of road vehicles. The communication is specified both for CAN communication mode and K-line communication mode. The diagnostic services based... | |
| ISO 16844-7:2014 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system... | |
| ISO 16845-1:2016 specifies the conformance test plan for the CAN data link layer and the physical signalling as standardized in ISO 11898‑1. This includes the Classical CAN protocols as well... | |
| ISO 16847:2016 specifies a method for assessing the matting appearance of the napped fabrics (fleece fabrics) tested, after one or several cleansing treatments. This method has been developed for use... | |
| ISO 16850:2007 specifies a test method to simulate the child head impact of a child pedestrian to the bonnet top of passengers vehicles or some light truck vehicles, as defined... | |
| ISO 16851:2012 specifies a method for determining the net length of an endless (spliced) conveyor belt. It applies to all types of construction of conveyor belting with the exception of... | |
| ISO 16852:2016 specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and... | |
| ISO 16853:2010 specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans according to ISO... | |
| ISO 16854:2004 establishes a vocabulary of terms for ring twisting textile machinery. | |
| ISO 16855:2013 specifies the general requirements for loose gear of lifting appliances on ships. ISO 16855:2013 is applicable to lifting appliances on ships. | |
| ISO 16856:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of hooks as loose gear of lifting appliances on ships. ISO 16856:2013 is... | |
| ISO 16857:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of shackles, loose gear of lifting appliances on ships. ISO 16857:2013 is applicable... | |
| ISO 16858:2013 specifies the structural types, basic parameters, technical requirements, test methods, inspection rules, marking, storage, and transportation of sheaves, loose gear of lifting appliances on ships. ISO 16858:2013 is... | |
| ISO 16859-1:2015 covers the determination of a dynamic hardness of metallic materials using seven different Leeb scales (HLD, HLS, HLE, HLDL, HLD+15, HLC, HLG). | |
| ISO 16859-2:2015 specifies methods for direct and indirect verification of test instruments used for determining Leeb hardness in accordance with ISO 16859‑1, and also describes when these two types of... | |
| ISO 16859-3:2015 specifies a method for the calibration of reference test blocks that are used for the indirect verification of Leeb hardness testers according to ISO 16859‑2 and for the... | |
| ISO 16860:2005 provides a standard method for determining the operating characteristics of a differential pressure or bypass valve condition-signalling device used as an accessory to a hydraulic fluid power filter. | |
| ISO 16861:2015 specifies the characteristics of DME used as fuel of which the main component is the dimethyl ether synthesized from any organic raw materials. ISO 16861:2015 is applicable for... | |
| ISO 16862:2003 describes test methods for evaluating the sag resistance (resistance to sagging) of paints, varnishes and similar coating materials (coatings) when applied to a substrate and held in a... | |
| ISO 16869:2008 specifies a method for determining the effectiveness of fungistatic compounds in protecting susceptible ingredients like plasticizers, stabilizers, etc., in plastics formulations. The method demonstrates whether or not a... | |
| ISO 16871:2003 specifies a method for exposing plastics pipes and fittings, individually or assembled, or as pieces therefrom, to natural weathering in order to assess changes. The exposure is considered... | |
| ISO 16872:2014 specifies the requirements for fine-tolerance hoist chains of grade VH for use as load chains in hand operated chain hoists for lifting purposes. They are round steel short... | |
| ISO 16873:2011 specifies the mounting surfaces for pressure switches and gives guidelines for the standardized arrangement of the connections for pressure switches and for the mounting of plates and hydraulic... | |
| ISO 16874:2004 provides identification coding for manifolds used in hydraulic systems and for component installation features (for example, mounting surfaces or cavities) of such manifolds. It specifies identification codes to... | |
| ISO 16875:2004 establishes a vocabulary of terms for ring spinning textile machines using the cotton spinning method. It also gives an example of the design of such machines. | |
| ISO 16877:2014 specifies the requirements for fine-tolerance hoist chains of grade TH for use as load chains in hand operated chain hoists for lifting purposes. They are round steel short... | |
| ISO 16878:2016 specifies a titrimetric method for the determination of the metallic iron content of reduced iron ores. This method is applicable to a concentration range of 57,5 % mass... | |
| ISO 16881-1:2005 gives the requirements for the selection of the size for iron or steel wheels and presents the formulae for the local stresses in crane structures due to the... | |
| ISO 16889:2008 describes a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements; a procedure for determining the contaminant capacity, particulate removal and differential pressure... | |
| ISO 16890-1:2016 establishes an efficiency classification system of air filters for general ventilation based upon particulate matter (PM). It also provides an overview of the test procedures, and specifies general... | |
| ISO 16890-2:2016 specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of air filters for general ventilation. It is... | |
| ISO 16890-3:2016 specifies the test equipment and the test methods used for measuring the gravimetric efficiency and resistance to air flow of air filter for general ventilation. It is intended... | |
| ISO 16890-4:2016 establishes a conditioning method to determine the minimum fractional test efficiency. It is intended for use in conjunction with ISO 16890‑1, ISO 16890‑2 and ISO 16890‑3, and provides... | |
| ISO 16891:2016 specifies a standard reference test method useful to assess the relative degradation characteristics of cleanable filter media for industrial applications under standardized simulated test conditions. The main purpose... | |
| ISO 16893:2016 specifies a classification matrix and the related mandatory tests and thickness ranges to be applied to wood-based particleboard for general purposes, furniture, load-bearing applications and heavy-duty load-bearing applications. | |
| ISO 16894:2009 gives definitions, classifications and specifications for the manufacturing requirements of oriented strand board (OSB). The values given are used to classify OSB into one of four types, namely... | |
| ISO 16895:2016 specifies a classification matrix, related mandatory tests and thickness ranges for ultra-low-, low-, medium- and high-density dry process wood-based fibreboard. It then provides the manufacturing property requirements for... | |
| ISO 16900-10:2015 specifies the methods for resistance to ignition, flame, radiant heat, and heat. | |
| ISO 16900-11:2013 specifies the laboratory test method for determining the field of vision for a respiratory protective device (RPD). | |
| ISO 16900-12:2016 specifies the test methods for determining the volume-averaged work of breathing and peak respiratory pressures imposed by the respiratory protective device (RPD). Elastic work, elastic physiological effects, and... | |
| ISO 16900-13:2015 specifies tests which are specific to RPDs using regenerated breathable gas, compressed breathable gas with class L respiratory interfaces, and special application mining escape RPD. | |
| ISO 16900-14:2015 specifies a laboratory test method for determining the sound level generated by the complete respiratory protective device (RPD) and RPD warning sounds measured on a headform to which... | |
| ISO 16900-1:2014 specifies the test methods for determining inward leakage of respiratory interfaces (RI) and total inward leakage of complete respiratory protective devices (RPD) using specified test agents and incorporating... | |
| ISO 16900-2:2017 specifies the method(s) of test for breathing resistance for - respiratory protective devices (RPDs), - filters for RPDs, and - respiratory interfaces (RI). | |
| ISO 16900-3:2012 specifies the test methods for particle filter penetration of separate or integral filters for respiratory protective devices. | |
| ISO 16900-4:2011 specifies the test method for determining gas capacity of separate or integral gas and combined filters for respiratory protective systems. ISO 16900-4:2011 includes the validation test at specified... | |
| ISO 16900-5:2016 specifies the characteristics of breathing machines, metabolic simulators, RPD head forms/torso, RPD tools and RPD verification tools that are common to RPD test laboratories. Standardization of these items... | |
| ISO 16900-6:2015 specifies the method of test for the mechanical resistance and strength of components of respiratory protective devices. | |
| ISO 16900-7:2015 specifies practical performance tests for respiratory protective devices (RPD). The purpose of these tests is to subjectively assess certain properties, characteristics, and functions of the RPD when worn... | |
| ISO 16900-8:2015 specifies the methods for measuring air flow rates delivered to the wearer by an assisted filtering RPD. | |
| ISO 16900-9:2015 specifies the test methods for determining the increased carbon dioxide content of the inhaled gas caused by wearing the RPD. Closed circuit supplied breathable gas RPD are excluded... | |
| ISO 16902-1:2003 establishes a test code based on ISO 9614-1 and ISO 9614-2 for determining the sound power levels of a hydraulic fluid power pump under controlled conditions of installation... | |
| ISO 16903:2015 gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. | |
| ISO 16904:2016 specifies the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) marine transfer arms intended for use on conventional onshore LNG terminals, handling... | |
| ISO 16906:2015 specifies a method for determining the strength of the seams of resilient floor coverings when welded in accordance with the manufacturer's instructions. | |
| ISO 16908:2014 specifies a test procedure to thermally condition a hydraulic filter element and simulate cold start, such as that which can be encountered in mobile machinery applications. It is... | |
| ISO 16908:2015 specifies the characteristics of rubber floor tile/planks. ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service. | |
| ISO 16911-1:2013 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular... | |
| ISO 16911-2:2013 describes specific requirements for automated measuring system (AMS) flow monitoring. It is partly derived from EN 14181 which is the general document on the quality assurance of AMSs... | |
| ISO 16915:2003 specifies the main dimensions and tolerances, in millimetres, of sprue pullers, which are used mainly in injection moulds for plastics and rubbers. It also specifies the material, hardness... | |
| ISO 16916:2016 defines the description and specification of injection moulds to be used when requesting tools (stage of tender) and ordering tools. This International Standard gives data for material acquisition,... | |
| ISO 16918-1:2009 specifies a method for analysing steel and iron for the trace element determinations of Sn, Sb, Ce, Pb and Bi using inductively coupled plasma mass spectrometry (ICP-MS). The... | |
| ISO 16919:2014 is meant primarily for those setting up and managing the organization performing the auditing and certification of digital repositories. It should also be of use to those who... | |
| ISO 16923:2016 covers the design, construction, operation, inspection and maintenance of stations for fuelling compressed natural gas (CNG) to vehicles, including equipment, safety and control devices. ISO 16923:2016 also applies... | |
| ISO 16924:2016 specifies the design, construction, operation, maintenance and inspection of stations for fuelling liquefied natural gas (LNG) to vehicles, including equipment, safety and control devices. ISO 16924:2016 also specifies... | |
| ISO 16925:2014 specifies a test method for the assessment of the resistance of coatings to pressure water-jetting. The test method simulates the effects pressure water-jetting has on a coating. | |
| ISO 16927:2014 specifies a method for testing the overcoatability and recoatability of unaged single-coat or multi-coat systems using a coating material which is intended for repairing damaged areas during or... | |
| ISO 16928:2014 specifies certain characteristics of the essential oil of ginger (Zingiber officinale Roscoe) cultivated in China, India and West Africa, in order to facilitate assessment of its quality. | |
| ISO 16929:2013 is used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for... | |
| ISO 16931:2009 specifies a method using high-performance size-exclusion chromatography (HPSEC) to determine the contents, as mass fractions, of polymerized triacylglycerols (PTAGs) in oils and fats which contain at least 3... | |
| ISO 16932:2016 determines resistance of security glazing products to natural threats characterized by simulated destructive-windstor m events. Classification is intended as a basis for judging the ability of glazing to... | |
| ISO 16933:2006 provides a structured procedure to determine the air-blast resistance of glazing and sets forth the required apparatus, procedures, specimens, other requirements and guidelines for conducting arena air-blast tests... | |
| ISO 16934:2007 specifies a shock tube test method and classification requirements for explosion-pressure-r esistant glazing, including glazing fabricated from glass, plastic, glass-clad plastics, laminated glass, glass/plastic glazing materials, and film-backed... | |
| ISO 16935:2006 sets forth test procedures to evaluate resistance of security glazing materials and products against ballistic impact with classification by weapon and ammunition. ISO 16935:2006 is applicable to attack... | |
| ISO 16936-1:2005 specifies requirements and a test method for security glazing designed to resist impacts of a hard body by delaying access of objects and/or persons to a protected space... | |
| ISO 16936-2:2005 specifies requirements and a mechanical test method for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space... | |
| ISO 16936-3:2005 sets forth a physical test method for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space for... | |
| ISO 16936-4:2005 specifies requirements and mechanical test methods for security glazing designed to resist actions of manual attack by delaying access of objects and/or persons to a protected space for... | |
| ISO 16938-1:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone or granite) by sealants used in building construction. The method evaluates the likelihood of... | |
| ISO 16938-2:2008 specifies a method for determining the staining of porous substrates (e.g. marble, limestone, sandstone, or granite) by sealants used in building construction. The method evaluates the likelihood of... | |
| ISO 16940:2008 describes a method for the measurement of the loss factor and the equivalent bending rigidity modulus of laminated glass test pieces. The aim is to compare the properties... | |
| ISO 16945:2014 specifies two methods for the determination of the edge crush resistance of a corrugating medium after laboratory fluting. The procedures are applicable to any corrugating medium to be... | |
| ISO 16946:2017 specifies the dimensions, material, and manufacture of a step wedge steel block for the calibration of ultrasonic instruments. | |
| ISO 16948:2015 describes a method for the determination of total carbon, hydrogen and nitrogen contents in solid biofuels. | |
| ISO 16954:2015 provides type test methods for evaluating the effectiveness of treatment methods intended to prevent or inhibit the formation of biofilm or to remove biofilm present in dental unit... | |
| ISO 16957:2016 describes a method of measuring the thermal conductivity (diffusivity) of a wet porous building material and a method of evaluating the measurement uncertainty. While ISO 10051 is the... | |
| ISO 16958:2015 specifies a method for the quantification of individual and/or all fatty acids in the profile of milk, milk products, infant formula and adult nutritional formula, containing milk fat... | |
| ISO 16960:2014 specifies a method for the determination of total sulfur in the range from 1 mg/m3 to 200 mg/m3 in pipeline natural gas by oxidative microcoulometry. Natural... | |
| ISO 16961:2015 specifies the minimum requirements for surface preparation, materials, application, inspection and testing of internal coating lining systems that are intended to be applied on internal surfaces of steel... | |
| ISO 16962:2017 specifies a glow-discharge optical-emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metallic surface coatings consisting of zinc- and/or aluminium-based... | |
| ISO 16964:2015 provides specification and testing requirements for high pressure flexible hose assemblies intended to be connected to gas cylinders, bundles of cylinders or trailers for use when filling and... | |
| ISO 16966:2013 gives guidelines for a common basic theoretical methodology to evaluate the activity of radionuclides in activated waste generated at nuclear reactors using neutron activation calculations. | |
| ISO 16967:2015 describes methods for the determination of major elements of solid biofuels respectively of their ashes, which are Al, Ca, Fe, Mg, P, K, Si, Na, Ti. The determination... | |
| ISO 16968:2015 is intended for the determination of the minor elements Arsenic, Cadmium, Cobalt, Chromium, Copper, Mercury, Manganese, Molybdenum, Nickel, Lead, Antimony, Vanadium, and Zinc in all solid biofuels. Further,... | |
| ISO 16971:2015 is applicable to optical coherence tomography (OCT) instruments, systems, and methods that are intended to image and measure the biological tissue of the posterior segment of the human... | |
| ISO 16972:2010 is applicable to respiratory protective devices. It defines commonly used terms and specifies units of measurement to achieve a uniform interpretation and to prevent ambiguous use. It indicates... | |
| ISO 16975-3:2017 specifies guidance on how to conduct fit testing of tight-fitting respiratory protective device (RPD) and on appropriate methods to be used. Fit testing is only one element of... | |
| ISO 16978:2003 specifies a method for determining the apparent modulus of elasticity and bending strength of wood-based panels in flatwise bending. | |
| ISO 16979:2003 specifies a method for determining the moisture content of wood-based panels. | |
| ISO 16981:2003 specifies a method for assessing the surface soundness of coated wood-based panels and uncoated particle-boards, wet- and dry-process fibreboards and cement-bonded particle-boards. | |
| ISO 16983:2003 specifies a method for determining the swelling in thickness of flat-pressed or drum-pressed particle boards, fibre boards, OSB, and cement-bonded particle boards, after immersion in water. | |
| ISO 16984:2003 specifies a method for determining the resistance to tension perpendicular to the plane of the panel, also known as "internal bond", of particle boards, OSB, fibre boards, and... | |
| ISO 16985:2003 specifies a method for the determination of dimensional changes in wood-based panels, due to variations in relative humidity. | |
| ISO 16987:2003 specifies a test method for the determination of the moisture resistance of wood-based panels under cyclic test conditions. | |
| ISO 16993:2016 gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be... | |
| ISO 16994:2016 describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. It specifies two methods for decomposition of the fuel and different analytical... | |
| ISO 16995:2015 describes a method for the determination of the water soluble chloride, sodium and potassium content in solid biofuels by extraction with water in a closed container and their... | |
| ISO 16998:2003 specifies a method of test for evaluating the bond quality of particleboards, OSB and fibreboards, intended for use in humid conditions. | |
| ISO 16999:2003 specifies certain rules for the sampling and cutting of test pieces. ISO 16999:2003 does not cover the sampling and cutting of test pieces for the derivation of characteristic... | |
| ISO 1701-1:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the... | |
| ISO 1701-2:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, vertical-spindle milling machines with table of variable height. It also specifies the... | |
| ISO 17034:2016 specifies general requirements for the competence and consistent operation of reference material producers. ISO 17034:2016 sets out the requirements in accordance with which reference materials are produced. It... | |
| ISO 1703:2018 gives a nomenclature in English of assembly tools for screws and nuts. NOTE Annex A provides the technically equivalent terms in French, one of the other official ISO... | |
| ISO 17049:2013 specifies the fundamental requirements for braille used on signage, equipment and appliances, including the dimensional parameters of braille and the characteristics of materials used, and the guidelines for... | |
| ISO 1704:2008 specifies the shape, proportions, dimensions and tolerances of the component parts of stud-link anchor chains. Any statutory requirements, rules and regulations applicable to the individual ship concerned also... | |
| ISO 17052:2007 specifies a method for the determination of residual monomers and other volatile low-molecular-mass compounds in raw rubber by capillary column gas chromatography using a thermal desorption (also known... | |
| ISO 17053:2005 specifies an infrared method after fusion under inert gas for the determination of oxygen in steel and iron. The method is applicable to mass fractions of oxygen between... | |
| ISO 17054:2010 specifies a procedure on how to improve the performance of a routine X-ray fluorescence spectrometry (XRF) method, already in use for analysis of high alloy steels, by using... | |
| ISO 17058:2004 specifies a method for the determination of the arsenic content in steel and iron using a spectrophotometric method after distillation. The method is applicable to an arsenic content... | |
| ISO 17059:2007 specifies a rapid method for extraction of oil and for preparation of the methyl esters of fatty acids. The methyl esters thus obtained can be used for gas... | |
| ISO 17063:2003 specifies minimum performance criteria and tests for braking systems, enabling a uniform assessment of the braking capability of pedestrian-controlle d, self-propelled earth-moving machinery (as specified in ISO 6165)... | |
| ISO 17064:2016 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB). | |
| ISO 17066-2:2007 provides a vocabulary for the various types of hydraulic tools, fixed and portable and for the attachments that are used with them. The terms are given by category:... | |
| ISO 17068:2017 specifies requirements for a trusted third party repository (TTPR) to support the authorized custody service in order to safeguard provable integrity and authenticity of clients' digital records and... | |
| ISO 17069:2014 specifies considerations to be taken, as well as support and assistive products that can be used when organizing a physical meeting in which older persons and persons with... | |
| ISO 17070:2015 specifies a method for determining the content of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-iso mers, and pentachlorophenol, its salts, and esters in leather. | |
| ISO 17071:2006 specifies two alternative methods for determining the fogging characteristics of leathers used in the passenger compartments of motor vehicles, namely Method A and Method B. These are two... | |
| ISO 17072-1:2011 specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspirat ion solution and subsequent determination with inductively coupled plasma/optical emission spectrometry... | |
| ISO 17072-2:2011 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES),... | |
| ISO 17074:2006 specifies a method for determining the horizontal burning rate of leather. It is applicable to all light leathers but is particularly intended for leathers used in the passenger... | |
| ISO 17075-1:2017 specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to... | |
| ISO 17075-2:2017 specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to... | |
| ISO 17076-1:2012 specifies a method of determining the abrasion resistance of leather using a Taber apparatus. | |
| ISO 17076-2:2011 specifies a method of determining the abrasion resistance of upholstery leather for different applications using Martindale apparatus with a ball plate. The method is applicable to semi-aniline, pigmented... | |
| ISO 17078-2:2007 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements... | |
| ISO 17078-3:2009 provides requirements and guidelines for running tools, pulling tools, kick-over tools and latches used for the installation and retrieval of flow control and other devices to be installed... | |
| ISO 17078:2004 provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of ISO 17078 includes specifying, selecting, designing, manufacturing, quality control, testing, and preparation... | |
| ISO 17080:2005 establishes principles and gives requirements for the design of single-panel product safety labels intended to be permanently affixed to manually portable agricultural and forestry machines and powered lawn... | |
| ISO 17081:2014 specifies a laboratory method for the measurement of hydrogen permeation and for the determination of hydrogen atom uptake and transport in metals, using an electrochemical technique. The term... | |
| ISO 17087:2006 specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumber products. Such products include, but are not limited to, interior and exterior mouldings,... | |
| ISO 17089-1:2010 specifies requirements and recommendations for ultrasonic gas flowmeters (USMs), which utilize the transit time of acoustic signals to measure the flow of single phase homogenous gases in closed... | |
| ISO 17090-1:2013 defines the basic concepts underlying the use of digital certificates in healthcare and provides a scheme of interoperability requirements to establish a digital certificate-enabled secure communication of health... | |
| ISO 17090-2:2015 specifies the certificate profiles required to interchange healthcare information within a single organization, between different organizations and across jurisdictional boundaries. It details the use made of digital certificates... | |
| ISO 17090-3:2008 gives guidelines for certificate management issues involved in deploying digital certificates in healthcare. It specifies a structure and minimum requirements for certificate policies, as well as a structure... | |
| ISO 17090-4:2014 supports interchangeability of digital signatures and the prevention of incorrect or illegal digital signatures by providing minimum requirements and formats for generating and verifying digital signatures and related... | |
| ISO 17090-5:2017 defines the procedural requirements for validating an entity credential based on Healthcare PKI defined in the ISO 17090 series used in healthcare information systems including accessing remote systems. | |
| ISO 17091:2013 specifies a method for the determination of the time-weighted average mass concentration of lithium hydroxide (LiOH), sodium hydroxide (NaOH), potassium hydroxide (KOH), and calcium dihydroxide [Ca(OH)2]... | |
| ISO 17092:2005 describes the test method for determining the corrosion resistance of fine ceramics in acid and alkaline solutions, such as sulfuric acid and sodium hydroxide. This International Standard is... | |
| ISO 17093:2015 is intended to assist in corrosion testing by electrochemical noise measurement. It covers test procedures and analysis methods for reliable measurement of electrochemical noise for both uncoated and... | |
| ISO 17094:2014 presents a test method for determining the antibacterial activity of materials that contain an indoor-light-active photocatalytic material or have indoor-light-active photocatalytic films on the surface by measuring the... | |
| ISO 17095:2013 specifies the method of test for determining the interfacial tensile and shear bond strength of ceramic-ceramic, ceramic-metal, and ceramic-glass joining at elevated temperature by the compression tests on... | |
| ISO 17096:2015 specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists, and manually controlled load manipulating devices as defined in Clause 3: - plate clamps; -... | |
| ISO 17099:2014 addresses the following: a) confidentiality of personal information for the customer and the laboratory; b) laboratory safety requirements; c) radiation sources, dose rates, and ranges used for establishing... | |
| ISO 1709:2018 specifies the basic principles and limitations which govern operations with fissile materials. It discusses general nuclear criticality safety criteria for equipment design and for the development of operating... | |
| ISO 17100:2015 provides requirements for the core processes, resources, and other aspects necessary for the delivery of a quality translation service that meets applicable specifications. Application of ISO 17100:2015 also... | |
| ISO 17101-1:2012 gives specifications and acceptance criteria for thrown-object testing of rotary mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: flail mowers; | |
| ISO 17101-2:2012 gives specifications and acceptance criteria for the thrown-object testing of flail mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: large... | |
| ISO 17103:2009 specifies requirements and acceptance criteria for testing the protective skirts of rotary disc mowers, rotary drum mowers and flail mowers used in agriculture. | |
| ISO 17107:2011 specifies a format for use in exchanging spacecraft navigation data. Such exchanges are used for distributing attitude, orbit, and tracking data between space agencies. ISO 17107:2011 specifies an... | |
| ISO 17109:2015 specifies a method for the calibration of the sputtered depth of a material from a measurement of its sputtering rate under set sputtering conditions using a single- or... | |
| ISO 1711-1:2016 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets. It covers the following three series of torsion torques: - Series A: usual box... | |
| ISO 1711-2:2016 specifies hardness and minimum torsional strength for machine-operated square drive sockets in accordance with ISO 2725‑2 intended for use with impact wrenches. EXAMPLE Reference nos. 2 2 02... | |
| ISO 17115:2007 defines a set of basic concepts required to describe formal concept representation systems, especially for health sciences, and describes representation of concepts and characteristics, for use especially in... | |
| ISO 17117-1:2018 defines universal and specialized characteristics of health terminological resources that make them fit for the purposes required of various applications. It refers only to terminological resources that are... | |
| ISO 17123-1:2014 gives guidance to provide general rules for evaluating and expressing uncertainty in measurement for use in the specifications of the test procedures of ISO 17123‑2, ISO 17123‑3, ISO... | |
| ISO 17123-5:2018 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of coordinate measurement of total stations and their ancillary equipment when used in building and... | |
| ISO 17123-6:2012 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for... | |
| ISO 17123-7:2005 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of optical plumbing instruments and their ancillary equipment, when used in building and surveying measurements. | |
| ISO 17123-8:2015 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of Global Navigation Satellite System (GNSS) field measurement systems (this includes GPS, GLONASS, as well... | |
| ISO 17126:2005 specifies test procedures for the determination of effects of contaminated soils or other contaminated samples on the emergence of lettuce seeds. ISO 17126:2005 is applicable to contaminated soils,... | |
| ISO 17129 IDF 206:2006 describes a method for the determination of the soy and pea protein isolates in low-heat milk powder, using capillary electrophoresis in the presence of sodium dodecyl... | |
| ISO 17130:2013 specifies a method of determining the dimensional change (shrinkage) of leathers caused by ageing. It is applicable to all leathers. | |
| ISO 17131:2012 specifies a method using microscopy to identify leather and distinguish it from other materials. The method is not applicable for identifying specific leathers (e.g. sheep leather). | |
| ISO 17132:2007 describes a method of evaluating the flexibility and adhesion of an organic coating on a metallic substrate by observing the cracking or loss of adhesion when a coated... | |
| ISO 17138:2014 describes a method for the determination of the flexural strength of ceramic matrix composite materials with continuous fibre reinforcement, under three-point or four-point bend at room temperature. This... | |
| ISO 17139:2014 describes methods for the determination of linear thermal expansion characteristics of ceramic matrix composite materials up to 2 300 K, and is applicable to 1D, 2D, and nD... | |
| ISO 17140:2014 specifies the conditions for the determination of properties at constant-amplitude of load or strain in uniaxial tension/tension or in uniaxial tension/compression cyclic fatigue of ceramic matrix composite materials... | |
| ISO 17142:2014 specifies the conditions for the determination of properties at constant-amplitude of load or strain in uniaxial tension/tension or in uniaxial tension/compression cyclic fatigue of ceramic matrix composite materials... | |
| ISO 17161:2014 describes a procedure to verify the degree of misalignment of the load train of the test machines using a reference test specimen uniformly loaded in tension or in... | |
| ISO 17162:2014 specifies a method for the determination of nominal compressive strength of advanced monolithic technical ceramic materials at room temperature. | |
| ISO 17165-1:2007 specifies requirements for hose assemblies that are manufactured from hoses that conform to ISO 3949 and to all parts of ISO 1436, ISO 3862, ISO 4079 and ISO... | |
| ISO 17170:2015 describes the test methods for determining spherical indentation strength of porous ceramics, such as those employed for filters and catalyst carriers, that are carried out in air at... | |
| ISO 17172:2014 specifies the test method for determining the extent to which granulated or ungranulated ceramic powders are compacted, when subjected to uniaxial compressive loading in a confining die, under... | |
| ISO 17175:2017 specifies methods for the determination of total particulate matter and for the subsequent determination of nicotine-free dry particulate matter present in the smoke from bidis generated and collected... | |
| ISO 17178:2013 specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength, tensile strength to be... | |
| ISO 17179:2016 specifies the fundamental structure and the most important performance characteristics of automated measuring systems for ammonia (NH3) to be used on stationary source emissions, for example,... | |
| ISO 17180:2013 specifies a method for the quantitative determination of free (non-protein-bound) lysine, methionine, and threonine in commercial products and premixtures containing more than about 10 % mass fraction of... | |
| ISO 17183:2016 specifies the procedure to screen highly contaminated soils to detect organic compounds extractable with isopropanol, including a wide range of fuels, oils, and greases. The method is useful... | |
| ISO 17184:2014 specifies a method for the determination of carbon and nitrogen in soils by direct measurement of sample spectra in the near-infrared spectral region. The spectra are evaluated by... | |
| ISO 17185-1:2014 defines the framework for the realization of efficient public transport user information provision to surface public transport users including international worldwide travellers. In the surface public transport user... | |
| ISO 17186:2011 specifies a method for determining the thickness of the surface coating applied to leather when measured under zero compression. It is applicable to all types of leather. | |
| ISO 17189 IDF 194:2003 specifies a method for the determination of the fat content of butter, edible oil emulsions and spreadable fats (margarine, vegetable oil spreads, dairy spreads and blended... | |
| ISO 17191:2004 specifies a method for the determination of polyacrylate (PA) superabsorbent powders in airborne dust by measurement of sodium (Na) by atomic absorption spectrometry (AAS). PA dust samples are... | |
| ISO 17194:2007 specifies a set of basic properties commonly required for the selection and use of structural adhesives in different applications. ISO standard test methods and test conditions are also... | |
| ISO 17196:2014 specifies a procedure of test for methanol, CO, CO2, methyl formate, ethyl methyl ether, and hydrocarbons up to C4, in DME used as fuel by the gas chromatography... | |
| ISO 17197:2014 specifies a procedure of test for the amount of water content in DME used as fuel by the Karl Fischer titration method. This procedure is applicable to determine... | |
| ISO 17198:2014 specifies a procedure of test for the sulfur content in dimethyl ether (DME) used as fuel by the ultraviolet (UV) fluorescence method. This procedure is applicable to determine... | |
| ISO 17201-2:2006 specifies methods for estimating the acoustic source data of muzzle blast and explosions and the source data of projectile sound on the basis of non-acoustic data for firearms... | |
| ISO 17201-3:2010 specifies methods of predicting sound exposure levels of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from... | |
| ISO 17201-4:2006 provides a computational model for determining the acoustical source level of projectile sound and its one-third-octave-ban d spectrum, expressed as the sound exposure level for nominal mid-band frequencies... | |
| ISO 17201-5:2010 gives guidelines for noise management of shooting activity at shooting ranges. The control of the noise received outside shooting ranges at specified reception points based either on measured... | |
| ISO 17202 specifies a method for the determination of the direction of twist in single yarns and the amount of twist, in terms of turns per unit length, by the... | |
| ISO 17208-1:2016 specifies the general measurement system, procedure, and methodology used for the measurement of underwater sound from ships under a prescribed operating condition. It does not specify or provide... | |
| ISO 17211:2015 describes the method for the sampling and determination of selenium compounds in both vapour phase and solid phase that are entrained in flue gases carried in stacks or... | |
| ISO 17212:2012 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to... | |
| ISO 17215-1:2014 describes the general use cases and communication scenarios, for a video communication interface for cameras used in video-based driver assistant systems. ISO 17215-1:2014 gives an overview of the... | |
| ISO 17215-2:2014 specifies how services can be discovered and controlled. This functionality is located mainly in layer 5 of the OSI model. Both discovery and control are implemented using the... | |
| ISO 17215-3:2014 specifies the standardized camera messages and data types used by a VCIC camera (OSI Layer 7). Applications hosted on ECUs want to communicate with one or more cameras... | |
| ISO 17215-4:2014 specifies the communication requirements for video camera interfaces. It is concerned mainly with layers 1 through 4 of the ISO/OSI basic reference model. These layers are the physical... | |
| ISO 17217-1:2014 specifies minimum requirements and test methods for ginseng seeds and seedlings, Panax ginseng C.A. Meyer. It is suitable for marketing of cultivated ginseng seeds and seedlings, P. ginseng... | |
| ISO 17218:2014 specifies the requirements for the sterile acupuncture needles for single use (specialized for filiform needles). | |
| ISO 17221:2014 specifies an instrumental method for determining the image clarity on plastics specimens by measuring reflection from the specimen surface or transmission through the specimen. The method can be... | |
| ISO 17223:2014 specifies an instrumental method for determining the yellowness index and change in yellowness index on clear, translucent, or opaque plastics. | |
| ISO 17225-1:2014 determines the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from a) forestry and arboriculture; b) agriculture and horticulture; and c) aquaculture. | |
| ISO 17225-2:2014 determines the fuel quality classes and specifications of graded wood pellets for non-industrial and industrial use. | |
| ISO 17225-3:2014 determines the fuel quality classes and specifications of graded wood briquettes. | |
| ISO 17225-4:2014 determines the fuel quality classes and specifications of graded wood chips. | |
| ISO 17225-5:2014 determines the fuel quality classes and specifications of graded firewood. | |
| ISO 17225-6:2014 determines the fuel quality classes and specifications of graded non-woody pellets. | |
| ISO 17225-7:2014 determines the fuel quality classes and specifications of graded non-woody briquettes. | |
| ISO 17226-1:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and not... | |
| ISO 17226-2:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on colorimetric analysis. The formaldehyde content is taken to be the... | |
| ISO 17226-3:2011 specifies a method for determining the emission of formaldehyde from leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and also allows the... | |
| ISO 17227:2002 specifies a method of determining the dry heat resistance of conditioned leathers. It is applicable to all leathers. | |
| ISO 17228:2015 specifies various ageing procedures to obtain an indication of the changes that could occur when leather is exposed to a certain environment for a prolonged time. Over time,... | |
| ISO 17229:2016 specifies a method for determining the water vapour absorption of leather. The method is applicable for all leathers but is particularly relevant for leathers intended for footwear uppers... | |
| ISO 17230:2006 describes a method for determining the water penetration pressure of leather. | |
| ISO 17231 | IULTCS/IUP 37:2017 specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method... | |
| ISO 17232:2017 specifies two methods for determining the heat resistance of patent leather. Method A makes use of a modified lastometer, while Method B uses the "Zwik" apparatus. Both methods... | |
| ISO 17233:2017 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which... | |
| ISO 17234-1:2015 specifies a method for determining the use of certain azo colorants which can release certain aromatic amines. | |
| ISO 17234-2:2011 is supplementary to ISO 17234-1 and describes a special procedure to detect the use of certain azo colorants in commodities, which can release 4-aminoazobenzene. The procedure also detects... | |
| ISO 17235:2015 specifies a non-destructive method for determining the softness of leather. It is applicable to all non-rigid leathers, e.g. shoe upper leather, upholstery leather, leathergoods leather, and apparel leather. | |
| ISO 17236:2016 specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers. | |
| ISO 17239:2004 specifies a hydride generation atomic absorption spectrometric method for the determination of the arsenic content of fruits, vegetables and derived products. | |
| ISO 17240:2004 specifies an atomic absorption spectrometric method for the determination of the tin content of fruit and vegetable products in the concentration range 10 mg/kg to 500 mg/kg. It... | |
| ISO 17244:2015 specifies a method for determining the effects of chemical and aqueous samples on the embryo-larval development of marine bivalves. It allows the determination of the concentration levels that... | |
| ISO 17245:2015 specifies the method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids which are under static conditions and exposing them to... | |
| ISO 17246:2010 establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. | |
| ISO 17247:2013 establishes a practice for the ultimate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals. | |
| ISO 17248:2015 specifies the method for high temperature corrosion testing of metallic materials by embedding in a corrosive powder made up of salt, ash, and/or other solids and exposing them... | |
| ISO 17249:2013 specifies requirements for safety footwear with resistance to chain saw cutting. | |
| ISO 1724:2003 specifies the dimensions of, and contact allocation tests and requirements for, 7-pole connectors of type 12 N for the electrical connection between towing and towed vehicles with 12... | |
| ISO 17253:2014 specifies the requirements for seated-operator, ride-on, earth-moving machinery, as defined in ISO 6165, and rough-terrain variable-reach trucks, as defined in ISO 10896‑1, intended to be driven on public... | |
| ISO 17254:2016 applies to coiled springs for use in orthodontic appliances. It gives details of methods to compare the physical and mechanical properties of coiled springs, the test methods by... | |
| ISO 17255:2014 provides an overview of the purpose and descriptions of statement of work (SOW), its required contents, and process for developing the document. ISO 17255:2014 is applicable to all... | |
| ISO 17257:2013 provides a qualitative method for the identification of rubbers by their pyrolysis products using tandem the gas-chromatography/m ass spectrometry. The method applies to rubbers in the raw state... | |
| ISO 17258:2015 describes a methodology for establishing the level of quality, performance, and productivity of processes, products, and services according to Six Sigma principles. It is applicable to all sectors... | |
| ISO 1726-2:2007 specifies dimensions to ensure interchangeability between a low coupling height tractor vehicle and a coupled high-volume semi-trailer, the two together constituting a high-volume articulated vehicle. It specifies certain... | |
| ISO 1726-3:2010 specifies the test conditions of a static test to be performed on the semi-trailer contact area to the fifth wheel. It ensures the ability of the semi-trailer to... | |
| ISO 17261:2012 describes the conceptual and logical architecture for automatic vehicle and equipment identification (AVI/AEI) and supporting services in an intermodal/multimoda l environment. It presents a high level view of... | |
| ISO 17262:2012 defines generic numbering and data structures for unambiguous identification of equipment used for Intermodal goods transport. These data are known as "Intermodal Goods Transport Numbering and Data Structures". | |
| ISO 17263;2012 establishes an AEI system based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows the transfer of the identification codes and further... | |
| ISO 17266:2018 specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm... | |
| ISO 17267:2009 specifies an application programming interface (API) for navigation systems. It specifies the data that may be retrieved from the map database and defines the interface for access. This... | |
| ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle),... | |
| ISO 17278:2013 specifies a method for the determination of gel content for technically specified rubbers (TSR). | |
| ISO 17280:2015 provides a method for the determination of 1,4-dioxane residues in surfactants which are synthesized from epoxyethane, such as alkyl ether sulfates and alcohol ethoxylates. The method is applicable... | |
| ISO 17282:2004 gives guidelines for the acquisition and presentation of data that can be used for design with plastics. Emphasis is given to the acquisition of data needed by computerised... | |
| ISO 17283-1:2014 specifies a method for the determination of monochloroacetic acid (monochloroacetate) and dichloroacetic acid (dichloroacetate) in surfactants by HPLC method. The method applies for anionic surfactants such as alkyl... | |
| ISO 17287:2003 specifies a procedure for assessing whether specific TICS, or a combination of TICS with other in-vehicle systems, are suitable for use by drivers while driving. It addresses user-oriented... | |
| ISO 17288-1:2011 specifies an open-loop test method for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering... | |
| ISO 17288-2:2011 specifies a procedure for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering pulse input,... | |
| ISO 17289:2014 specifies an optical method for the determination of dissolved oxygen in water using a sensor working on the basis of fluorescence quenching. Measurement can be made either as... | |
| ISO 1728:2006 specifies the requirements which ensure interchangeability of the pneumatic braking connections between motor vehicles and towed vehicles. It concerns vehicle combinations equipped with pneumatic braking systems with two... | |
| ISO 17292:2015 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes... | |
| ISO 17293-2:2014 specifies a method for the determination of monochloroacetic acid (monochloroacetate) and dichloroacetic acid (dichloroacetate) in surfactants by ion chromatographic method. The method applies for anionic surfactants such as... | |
| ISO 17294-1:2004 specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general directions for the use of this technique for determining elements in water. Generally, the measurement... | |
| ISO 17294-2:2016 specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, gadolinium, gallium, germanium,... | |
| ISO 17296-2:2015 describes the process fundamentals of Additive Manufacturing (AM). It also gives an overview of existing process categories, which are not and cannot be exhaustive due to the development... | |
| ISO 17296-3:2014 covers the principal requirements applied to testing of parts manufactured by additive manufacturing processes. It specifies main quality characteristics of parts, specifies appropriate test procedures, and recommends the... | |
| ISO 17296-4:2014 covers the principal considerations which apply to data exchange for additive manufacturing. It specifies terms and definitions which enable information to be exchanged describing geometries or parts such... | |
| ISO 17299-1:2014 specifies the general principle of the deodorant textile products and deodorant testing methods for textile products, such as woven fabric, knit, nonwoven, fibres and yarns, braiding products, tapes... | |
| ISO 17299-2:2014 specifies a deodorant testing method using a detector tube for all textile products. This method is applicable to the odour component chemicals of ammonia, acetic acid, methyl mercaptan,... | |
| ISO 17299-3:2014 specifies a gas chromatography test method for the deodorant testing of all textile products. This method applies to the odour component chemicals, such as indole, isovaleric acid, nonenal,... | |
| ISO 17299-4:2014 specifies a deodorant testing method using analytical instruments after using condensation sampling methods for all textile products. This method is applicable to gaseous odour chemicals, such as indole,... | |
| ISO 17299-5:2014 specifies a deodorant test method using an odour analyser equipped with multiple metal-oxide semiconductor sensors against composite odours. The artificial composite odours used in ISO 17299-5:2014 are a... | |
| ISO 17304:2013 specifies a test method for the measurement of the polymerization shrinkage of external energy-activated polymer-based restorative materials such as composites and core materials. | |
| ISO 17308:2015 specifies a test method for the determination of the electrical conductivity in ethanol fuel and mixtures (including E85) in the range of 0,5 μS·cm−1 to 4 μS·cm... | |
| ISO 17312:2005 specifies the determination of the hydraulic conductivity of granular soils (e.g. sand and gravel) using a constant-head method involving a rigid-wall permeameter to measure the laminar flow of... | |
| ISO 17313:2004 specifies a test method for laboratory measurement of the hydraulic conductivity of water-saturated porous materials using a flexible wall permeameter. ISO 17313:2004 is applicable to undisturbed or compacted... | |
| ISO 17314:2008 specifies a method for calculating the recyclability rate and the recoverability rate of manually portable forest machinery, with each rate being expressed as a percentage by mass (mass... | |
| ISO 17315:2014 specifies a test method for the determination of total acidity of ethanol by potentiometric titration. The total acidity is reported as acetic acid mass, in milligrams, per ethanol... | |
| ISO 17316:2014 specifies an identifier of links between entities (or their names) in the field of information and documentation. These entities can be documents, media resources, people, or more abstract... | |
| ISO 17321-1:2012 specifies colour stimuli, metrology, and test procedures for the colour characterization of a digital still camera (DSC) to be used for photography and graphic technology. Two methods are... | |
| ISO 17324:2014 specifies requirements of rubber hoses used in the automotive turbocharger system to connect turbocharger, intercooler, and internal combustion engine at the working temperatures from −40°C to +250°C and... | |
| ISO 17325-1:2014 specifies the basic design requirements, general function, designations and marking of oil booms. It further specifies minimum information regarding design, dimensions and materials of oil booms to be... | |
| ISO 17325-2:2014 (in addition to ISO 17325-1) specifies the particular strength and performance requirements of oil booms and associated test methods. It does not purport to address the safety concerns,... | |
| ISO 17327-1:2018 specifies general requirements for implant coatings, comprising both surface coatings and surface modifications, applied to non-active surgical implants. This document specifies requirements concerned with generic coating properties including... | |
| ISO 17328:2014 provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm. | |
| ISO 17331:2004 specifies chemical methods for the collection of iron and/or nickel from the surface of silicon-wafer working reference materials by the vapour-phase decomposition method or the direct acid droplet... | |
| ISO 17334:2008 specifies the requirements for autocatalytic nickel-phosphorus alloy coatings applied over autocatalytic copper coatings to provide electromagnetic interference (EMI) or electrostatic discharge (ESD) protection for parts fabricated from either... | |
| ISO 17338:2009 specifies the design and layout of drawings for indicating the fire rating of thermal and structural boundaries (divisions) for fire protection of ships. | |
| ISO 17340:2014 specifies methods for high speed compression testing, at room temperature, of porous and cellular metals having a porosity of 50 % or more. The speed range applicable to... | |
| ISO 17348:2016 provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure... | |
| ISO 17349:2016 contains provisions for design of topside facilities for offshore plants handling CO2-rich streams at high pressures; i.e. CO2 molar concentration above 10 %. The surface systems include usual... | |
| ISO 1735 IDF 5:2004 specifies the reference method for the determination of the fat content of all types of cheese and processed cheese products having lactose contents of below 5... | |
| ISO 17351:2013 specifies requirements and provides guidance for the application of Braille to the labelling of medicinal products. | |
| ISO 17352:2008 specifies a test method, using graphite-furnace atomic absorption, to determine the mass fraction of silicon in cobalt metal powder with varying compositions within the range of 5 µg/g... | |
| ISO 17353:2004 specifies a method for the identification and quantification of monobutyltin, dibutyltin, tributyltin, tetrabutyltin, monooctyltin, dioctyltin, triphenyltin, tricyclohexyltin compounds and/or cations in drinking water, surface water and wastewater containing... | |
| ISO 17355:2007 defines a CCSDS file delivery protocol (CFDP) and associated service for application in the space environment. It is intended for use over the current and envisaged packet delivery... | |
| ISO 17356-1:2005 outlines the general structure of, and defines terms and abbreviations used in relation to, the specification of the software open interface for embedded automotive applications given by the... | |
| ISO 17356-2:2005 gives the OSEK/VDX specifications for binding the OS (operating system), COM (communications) and NM (network management) of the open interface for embedded automotive applications. It specifies the variables... | |
| ISO 17356-3:2005 describes the concept of a real-time operating system, capable of multitasking, which can be used for motor vehicles. It is not a product description which relates to a... | |
| ISO 17356-4:2005 (COM) specifies a uniform communication environment for automotive control unit (ECU) application software. In ISO 17356-4:2005 , the specification increases the portability of application software modules by defining... | |
| ISO 17356-5:2006 defines a set of services for node monitoring (NM). NM consists of the following: interface to interact with the Application Programming Interface(API); algorithm for node monitoring; internal interfaces... | |
| ISO 17356-6:2006 describes the OSEK Implementation Language (OIL) concept for the description for ISO 17356 real-time systems, capable of multitasking and communications, which can be used for motor vehicles. It... | |
| ISO 17357-1:2014 specifies the material, performance, and dimensions of high-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing and mooring of a ship to another... | |
| ISO 17357-2:2014 specifies the material, performance, and dimensions of low-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing, and mooring of a ship to another... | |
| ISO 17359:2018 gives guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this process. | |
| ISO 1736 IDF 9:2008 specifies the reference method for the determination of the fat content of dried milk and dried milk products. The method is applicable to dried milk with... | |
| ISO 17361:2017 specifies the definition of the system, classification, functions, human-machine interface (HMI) and test methods for lane departure warning systems. These are in-vehicle systems that can warn the driver... | |
| ISO 17369:2013 provides an integrated approach to facilitating Statistical Data and Metadata Exchange (SDMX), enabling interoperable implementations within and between systems concerned with the exchange, reporting and dissemination of statistical... | |
| ISO 1737 IDF 13:2008 specifies the reference method for the determination of the fat content of all types of evaporated milk and sweetened condensed milk (liquid sweetened and unsweetened concentrated... | |
| ISO 17372:2007 is applicable to the analysis of zearalenone in animal feed and feed ingredients, including barley, corn, oats, rye, wheat, soybean meal, canola (rapeseed) meal, corn gluten, dried distillers'... | |
| ISO 17375:2006 specifies a method for the determination of aflatoxin B1 in animal feeding stuffs using high-performance liquid chromatography with post-column derivatization. It is applicable to animal feeding stuffs... | |
| ISO 17378-1:2014 specifies a method for the determination of arsenic and antimony. The method is applicable to drinking water, surface water, ground water and rain water. The linear application range... | |
| ISO 17378-2:2014 specifies a method for the determination of arsenic and antimony. The method is applicable to drinking water, surface water, ground water, and rain water. The approximate linear application... | |
| ISO 1738 IDF 12:2004 specifies a method for the determination of the salt content of butter. The method is applicable to all types of butter containing more than 0,1 %... | |
| ISO 17380:2013 specifies a method for the photometric determination of the total cyanide and easily-liberatable cyanide content in soil using automated distillation/continu ous-flow analysis. ISO 17380:2013 applies to all types... | |
| ISO 17381:2003 gives guidance on the selection, and requirements for the application, of ready-to-use methods in water analysis. The so-called "ready-to-use methods" are of increasing interest because, compared to standard... | |
| ISO 17382:2007 specifies certain characteristics of the oil of Magnolia flower, China type (Michelia x alba DC), in order to facilitate assessment of its quality. | |
| ISO 17386:2010 addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with MALSO (Manoeuvring Aids for Low Speed Operation) systems. It specifies... | |
| ISO 17387:2008 specifies system requirements and test methods for Lane Change Decision Aid Systems (LCDAS). LCDAS are fundamentally intended to warn the driver of the subject vehicle against potential collisions... | |
| ISO 1739 IDF 7:2006 specifies a reference method for the determination of the refractive index of the fat obtained by melting butter. | |
| ISO 17396:2017 specifies the principal characteristics of synchronous endless and open belts and pulleys of the profile systems T and AT for use in synchronous belt drives for mechanical power... | |
| ISO 17398:2004 specifies requirements for a performance-related classification system for safety signs according to expected service environment, principal materials, photometric properties, means of illumination, fixing methods and surface. Performance criteria... | |
| ISO 1740 IDF 6:2004 specifies a method for the determination of the acidity of the fat contained in milkfat products and in butter. | |
| ISO 17401:2004 provides spacecraft (SC) organizations with the general format for presenting the interface requirement document (IRD) for launch vehicle services. The IRD provides a list of the major technical... | |
| ISO 17402:2008 provides guidance for the selection and application of methods to assess bioavailability for the characterisation of contaminated soil and soil materials. ISO 17402:2008 does not give a selection... | |
| ISO 17403:2014 specifies a cyanide-free titration method for the determination of the magnesium content in field and concentrated natural rubber latex. | |
| ISO 17405:2014 specifies the techniques for manual ultrasonic testing of claddings on steel applied by welding, rolling, and explosion using single-element or dual-element probes. The test is intended to cover... | |
| ISO 17409:2015 specifies electric safety requirements for conductive connections of electrically propelled road vehicles to an external electric power supply using a plug or vehicle inlet. It applies to electrically... | |
| ISO 17411:2014 specifies the measuring method for the homogeneity of the refractive index of optical glasses by laser interferometry. | |
| ISO 17412 specifies certain characteristics of the oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare), in order to facilitate assessment of its quality. | |
| ISO 17432:2005 specifies a web-based service for accessing and presenting DICOM (Digital Imaging and Communications in Medicine) persistent objects (e.g. images, medical imaging reports). This is intended for distribution of... | |
| ISO 17438-1:2016 specifies the indoor navigation system architecture including additional components that are added to the existing ITS system and use cases in providing indoor navigation to various types of... | |
| ISO 17440:2014 is intended to be used together with the other relevant International Standards in its series. As such, they specify general conditions, requirements and methods to prevent hazards in... | |
| ISO 17442:2012 specifies the elements of an unambiguous legal entity identifier (LEI) scheme to identify the legal entities relevant to any financial transaction. | |
| ISO 17447-1:2015 specifies the main properties and dimensions of metal-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines. | |
| ISO 17447-2:2015 specifies the main properties and dimensions of ceramic-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines. | |
| ISO 17447-3:2015 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to... | |
| ISO 17449:2015 This provides the test methods and acceptance criteria for circuit continuity and heating power, driving visibility, electrical attachment bond performance, electrical attachment bending performance, hot spot identification and... | |
| ISO 17450-1:2011 provides a model for geometrical specification and verification and defines the corresponding concepts. It also explains the mathematical basis of the concepts associated with the model and defines... | |
| ISO 17450-3:2016 gives default definitions for the extracted features (integral or derived) of workpieces, which are toleranced features in GPS specifications (dimensional, geometrical, or surface texture specifications). This part of... | |
| ISO 17451-1:2016 relates to the moving of household goods and personal effects. It provides the codification of items and their condition, the transportation modes and associated data relating to a... | |
| ISO 17454:2006 specifies a method for testing the adhesion between layers of multilayer pipes using a pulling test rig. | |
| ISO 17455:2005 specifies two test methods for determining the oxygen permeability of barrier pipe: the dynamic and the static methods. | |
| ISO 17456:2006 specifies two alternative methods for determining the long-term hydrostatic strength of multilayer pipes: a calculation method applicable to multilayer P pipes (all polymer layers) and a test method... | |
| ISO 17458-1:2013 gives an overview of the structure and the partitioning of ISO 17458 and shows the relation between the different parts. In addition, it outlines the use case scenarios... | |
| ISO 17458-2:2013 specifies the FlexRay communication protocol which is specified for a dependable automotive network. Some of the basic characteristics of the FlexRay protocol are synchronous and asynchronous frame transfer,... | |
| ISO 17458-3:2013 specifies the FlexRay protocol conformance test. This test verifies the conformance of FlexRay communication controllers with respect to ISO 17458-2. Some testability requirements are given and are applicable... | |
| ISO 17458-4:2013 specifies the electrical physical layer for FlexRay communications systems. The electrical physical layer for FlexRay is designed for time-triggered networks with data-rates up to 10 Mbit/s to connect... | |
| ISO 17458-5:2013 specifies the conformance test for the electrical physical layer of the FlexRay communications system. ISO 17458-5:2013 defines a test that considers ISO 9646 and ISO 17458-4. It provides... | |
| ISO 17463:2014 gives guidelines on how to perform accelerated cyclic electrochemical technique (ACET) with organic protective coatings on metals. ISO 17463:2014 specifies: - the instrumental assembly; - the execution of... | |
| ISO 17464:2016 specifies the technical requirements and test methods for tubes of pneumatic tyres for automotive vehicles. | |
| ISO 17468:2016 gives technical requirements and guidance on the establishment or revision of standardized reference methods for the analysis (detection or quantification) of microorganisms in - products intended for human... | |
| ISO 17469-1:2015 specifies an Extensible Markup Language (XML) vocabulary and schema (XSD) for the elements that are common and considered to be part of the essential core of the strategic... | |
| ISO 17470:2014 gives guidance for the identification of elements and the investigation of the presence of specific elements within a specific volume (on a μm3 scale) contained in a... | |
| ISO 17474:2012 is intended to provide conventions for reporting and displaying electrochemical corrosion data. Conventions for potential, current density and electrochemical impedance, as well as conventions for graphical presentation of... | |
| ISO 17475:2005 applies to corrosion of metals and alloys, and describes the procedure for conducting potentiostatic and potentiodynamic polarization measurements. The test method can be used to characterise the electrochemical... | |
| ISO 17479:2013 specifies methods for the direct measurement of the concentration of gaseous exhaust emissions from motorcycles as defined in ISO 3833 during inspection or maintenance. The results measured by... | |
| ISO 17480:2015 specifies requirements and recommendations for the accessible design for packaging with a focus on ease of opening. It applies to reclosable and non-reclosable consumer packaging without using any... | |
| ISO 17484-1:2014 specifies the general requirements and the performance requirements for multilayer pipe systems based on pipes, fittings and their joints intended to be used for gas supply within buildings. | |
| ISO 17484-2:2009 specifies the recommended practice for the installation of multilayer pipe systems in accordance with ISO 17484-1:2006. It is applicable to piping systems used in buildings to supply gas... | |
| ISO 17485:2006 establishes a classification system that can be used to communicate geometrical accuracy specifications of unassembled bevel gears, hypoid gears, and gear pairs. It defines gear tooth accuracy terms,... | |
| ISO 17488:2016 provides a detection-response task mainly intended for assessing the attentional effects of cognitive load on attention for secondary tasks involving interaction with visual-manual, voice-based or haptic interfaces. Although... | |
| ISO 17489:2013 specifies a simple and practical method of determining the adsorbable fraction of synthetic tanning agents using a polymer-based product. It is particularly suitable for measuring the batch-to-batch consistency... | |
| ISO 17491-3:2008 specifies a test method for determining the resistance of protective clothing against penetration by a jet of liquid. ISO 17491-3:2008 is applicable to clothing with liquid-tight connections between... | |
| ISO 17491-4:2008 specifies methods for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity: Method A: low-level spray test. | |
| ISO 17491-5:2013 specifies an alternative test method to the one described in ISO 17491-4. The method for determining the resistance to chemical spray penetration differs from the method in ISO... | |
| ISO 17492:2003 specifies a test method for measuring the heat transfer of horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant energy. This test method... | |
| ISO 17493:2016 describes a test method for evaluating the heat resistance of protective clothing materials or items and equipment when exposed in a hot air circulating oven. The method is... | |
| ISO 17497-1:2004 specifies a method of measuring the random-incidence scattering coefficient of surfaces as caused by surface roughness. The measurements are made in a reverberation room, either in full scale... | |
| ISO 17499:2006 covers carbonaceous materials used in the production of aluminium. ISO 17499:2006 specifies the determination of the equivalent temperature of one anode or cathode in a baking furnace, and... | |
| ISO 17500:2006 specifies a procedure for the determination of the attrition index of smelter-grade alumina. | |
| ISO 17502:2013 specifies a method for determining the reflectance properties of a leather surface for visible and near infra-red radiation. The reflection value in the near infra-red determines if a... | |
| ISO 17509:2016 specifies requirements for torque transmitters to be used in oral implantology in conjunction with a dental handpiece as an accessory in the placement of dental implants and the... | |
| ISO 17510:2015 applies to masks and their accessories used to connect a sleep apnoea breathing therapy equipment to the patient. It specifies requirements for masks and accessories, including any connecting... | |
| ISO 17511:2003 specifies how to assure the metrological traceability of values assigned to calibrators and control materials intended to establish or verify trueness of measurement. The calibrators and control materials... | |
| ISO 17512-1:2008 specifies a rapid screening method for evaluating the habitat function of soils and the influence of contaminants and chemicals on earthworm behaviour. The sublethal test is a rapid... | |
| ISO 17512-2:2011 specifies a rapid screening method for evaluating the habitat function of soils based on the avoidance behaviour of springtails. The test is a rapid method that reflects the... | |
| ISO 17514:2004 specifies the test methods for the photoluminescent deposits applied to time-measuring instruments, together with the requirements related to them. | |
| ISO 17515-1:2015 enables usage of the E-UTRAN cellular network technology as an ITS access technology in an ITS station by specifying details of the "Communication Adaptation Layer" (CAL) and the... | |
| ISO 17516:2014 is applicable for all cosmetics and assists interested parties in the assessment of the microbiological quality of the products. Microbiological testing does not need to be performed on... | |
| ISO 17520:2016 describes the effective vertical cut-off rigidities of charged particles for near-Earth space and establishes principal requirements for their calculation. In Annex A, the calculation technique is verified using... | |
| ISO 17523:2016 specifies the requirements that apply to electronic prescriptions. It describes generic principles that are considered important for all electronic prescriptions. ISO 17523:2016 is constrained to the content of... | |
| ISO 17526:2003 covers terms and definitions as well as test methods and evaluation procedures to characterize, estimate and predict the longterm behaviour of various types of lasers. It defines terms... | |
| ISO 17532:2007 specifies a protocol for the automatic and interactive communication and control of computer systems used in livestock production. It supports communication within the livestock production as well as... | |
| ISO 17533:2015 specifies appropriate welding/brazing design information on drawings serving to ensure fit, form and function of welded/brazed joints, and is applicable to welded and brazed metallic component parts used... | |
| ISO 17534‑1:2015 describes quality requirements and measures to ensure, to indicate, and to verify the degree of conformity of a software program with a consistently implementable calculation method/procedure. The main... | |
| ISO 17536-1:2015 specifies general conditions, defines terms and establishes the basic principles for blowby oil aerosol separator performance tests by laboratory or engine and gravimetric or fractional test method. | |
| ISO 17540:2016 provides terms and definitions in scope of design, testing, reliability analysis and quality control of liquid rocket engines. The terms are required for use in all types of... | |
| ISO 17541:2014 deals with quantitative evaluation of scratch-induced damage and scratch visibility in polymers. ISO 17541:2014 specifies two methods to assess scratch damage and scratch visibility expressed by three colour... | |
| ISO 17544:2004 describes a method of producing a compaction curve indicating the rammability of carbonaceous ramming pastes used to line cathodes utilized in the production of aluminium. | |
| ISO 17546:2016 specifies design and minimum verification requirements for lithium ion rechargeable (including lithium ion polymer) batteries for space vehicles. Lithium ion secondary electrochemical systems use intercalation compounds (intercalated lithium... | |
| ISO 1754:2010 specifies the dimensions on the film of still picture sizes made with cameras in which the image dimensions are defined by the camera frame. Panoramic image dimensions of... | |
| ISO 17551:2018 provides guidance for grading pickled sheep pelts based on size and defects. | |
| ISO 17554:2014 specifies a small-scale method for assessing the mass loss rate of essentially flat specimens exposed in the horizontal orientation to controlled levels of radiant heating with an external... | |
| ISO 17555:2003 specifies the requirements for biaxially oriented polypropylene (PP) films, which are mainly used for packaging. The film may be used alone or in laminates with other films. This... | |
| ISO 17556:2012 specifies a method for determining the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a closed respirometer or the amount of carbon... | |
| ISO 17558:2006 specifies procedures for the molten metal and resin socketing of steel wire ropes. It also specifies a type testing method for assessing the performance of a socketing system. | |
| ISO 17560:2014 specifies a secondary-ion mass spectrometric method using magnetic-sector or quadrupole mass spectrometers for depth profiling of boron in silicon, and using stylus profilometry or optical interferometry for depth... | |
| ISO 17561:2016 describes the method of test for determining the dynamic elastic moduli of fine ceramics at room temperature by sonic resonance. It is for fine ceramics that are elastic,... | |
| ISO 17562:2016 specifies a method for the determination of the linear thermal expansion and the linear thermal expansion coefficient of monolithic ceramics from near liquid nitrogen temperature up to a... | |
| ISO 17564:2008 specifies a method using Wijs' solution to determine the iodine value (i.e. the residual unsaturation) of raw hydrogenated nitrile rubber (HNBR). | |
| ISO 17565:2003 describes the method of test for determining the flexural strength of monolithic fine ceramics and whisker- or particulate-reinforc ed ceramic composites at elevated temperature. Flexural strength is one... | |
| ISO 17566:2011 provides a specific format for the development of test documentation for an individual test of a spacecraft, subsystem or unit. It is focused on the definition of the... | |
| ISO 17567:2005 specifies the hydraulic power beyond of tractors used in agricultural and forestry, and the number, type, capacity and identification of the associated connections between these tractors and their... | |
| ISO 17573:2010 defines the architecture of a toll system environment in which a customer with one contract can use a vehicle in a variety of toll domains and with a... | |
| ISO 17575-1:2016 defines the format and semantics of the data exchange between a Front End (OBE plus optional proxy) and corresponding Back Ends in autonomous toll schemes. It defines the... | |
| ISO 17575-2:2016 defines how to convey all or parts of the data element structure defined in other parts of ISO 17575 over any communication stack and media suitable for this... | |
| ISO 17575-3:2016 defines the content, semantics and format of the data exchange between a Front End (OBE plus optional proxy) and the corresponding Back End in autonomous toll systems. It... | |
| ISO 17577:2016 specifies a method for the automated and/or manual ultrasonic testing of uncoated steel flat products for internal discontinuities by the pulse echo technique. It is applicable to non-alloyed... | |
| ISO 17584:2005 specifies thermophysical properties of several commonly used refrigerants and refrigerant blends. ISO 17584:2005 is applicable to the refrigerants R12, R22, R32, R123, R125, R134a, R143a, R152a, R717 (ammonia),... | |
| ISO 17586:2016 specifies a method of extracting trace elements from soil at approximately pH 0,5 using a dilute nitric acid solution. Using this method the potential environmental available trace elements... | |
| ISO 17591 defines identifying terms, specifies a means of classification and gives a nomenclature of components for the knuckleboom log loader machinery used in forestry. Its aim is to establish... | |
| ISO 17593:2007 specifies requirements for in vitro measuring systems for self-monitoring of vitamin-K antagonist therapy, including performance, quality assurance and user training and procedures for the verification and validation of... | |
| ISO 17599:2003 specifies methods for determining the steady-state performance characteristics and dynamic performance characteristics of positive-displacemen t electrically and electronically controlled hydraulic pumps, so as to allow comparison of the... | |
| ISO 17599:2015 specifies the requirements for the classification, composition, modelling, review, application, and management of digital mock-up. This International Standard for mechanical products is applicable to the building, management, review,... | |
| ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting from... | |
| ISO 17601:2016 specifies the crucial steps of a quantitative real-time polymerase chain reaction (qPCR) method to measure the abundance of selected microbial gene sequences from soil DNA extract which provides... | |
| ISO 17602:2014 specifies the basic series of face-to-face or centre-to-face dimensions for two-way metal valves used in flanged pipe systems for ship and marine services. Each series of face-to-face or... | |
| ISO 17604:2015 specifies sampling methods for the detection and enumeration of microorganisms on the surface of carcasses or parts of carcasses of slaughtered meat animals. The microbiological sampling can be... | |
| ISO 17608:2015 specifies a method to determine the resistance of bare elastane yarns to chlorinated aqueous environments, such as swimming pools, through testing of the breaking force retention. Different alternative... | |
| ISO 17612:2004 specifies the essential interface dimensions of a connector and its plug for the transmission of 12 V electrical power within the enclosed operator station of agricultural tractors and... | |
| ISO 17615:2007 defines the requirements for grades of alloyed aluminium ingots intended for remelting. It specifies the classifications and designations applicable to these grades, the conditions in which they are... | |
| ISO 17616:2008 is one of a series providing guidance on the characterization of soils and soil materials in relation to their retention and habitat function and uses. It should be... | |
| ISO 17617:2014 specifies a testing method for evaluating the moisture-drying properties of all types of textile fabric. The method is not suitable for determining a drying rate on textiles in... | |
| ISO 17621:2015 specifies requirements and test methods under prescribed laboratory conditions for length-of-stain detector tubes and their associated pump (detector tube measurement system) used for short-term measurements of the concentration... | |
| ISO 17624:2004 deals with the effectiveness of acoustical screens. It specifies the acoustical and operational requirements to be agreed upon between the supplier or manufacturer and the user of acoustical... | |
| ISO 17624:2009 provides the specifications of: common AVI/AEI transaction requirements, which define the common steps of any AVI/AEI transaction; AVI/AEI application interface to standardized wireless protocols (referred to as the... | |
| ISO 17632:2015 specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition... | |
| ISO 17633:2017 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position... | |
| ISO 176:2005 specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of rime and temperature, in the presence of... | |
| ISO/TS 1762:2015 describes the determination of the residue (ash) on ignition of paper, board and pulp at 525 °C. It is applicable to all types of paper, board, and pulp... | |
| ISO16813:2006 establishes the general principles of building environment design taking into account healthy indoor environment for the occupants, and protecting the environment for future generations. ISO16813:2006 promotes an approach in... | |
| L'ISO 17224:2015 spécifie la méthode utilisée pour les essais de corrosion à haute température de matériaux métalliques par application d'un dépôt de sel, de cendres et/ou d'autres substances, en les... | |
| Lays down the basic dimensions of drill rods and the necessary dimensions of the tapered connections. These dimensions shall comply with those given in figure 1 and table 1 and... | |
| Specification of a qualitative method of detecting the presence of free ammonia or other volatile bases in phenol-formaldehyde mouldings by the exposure of an indicator paper to the vapour from... | |
| Specified are the essential dimensions of slides of three internationally used sizes and of the title strip. They are intended to facilitate the manufacture, use and international interchangeability of projector... | |
| Specifies a method of determining the bulk factor of a moulding material from its apparent density in the unmoulded form and its density in the moulded form. Knowledge of the... | |
| Specifies both geometrical and practical tests on these parallel lathes, and gives the corresponding permissible dviations which apply. It deals only with verification of the accuracy of the machine. It... | |
| Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: shank adapters for central flushing, hexagon type and lug-shank type; extension rods; coupling sleeves; four-wing... | |
| Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: size of drill-steel in bar form; lengths of extension rods; coupling sleeves; bit diameters (four-wing... | |
| Specifies the connecting dimensions for drill-rods and the shanks of drill-bits. In addition, an example is given for wet drilling. Tabulates dimensions in millimetres and inches; some figures illustrate shapes... | |
| Specifies the determination for natural and synthetic materials having a molar ratio sodium fluoride/aluminium trifluoride between 3 and 1,7 approximately. The principle consists in fusion of a test portion with... | |
| Specifies the dimensions of the stillages in direct contact with the hand-operated elevating trucks: free height, minimum free width. | |
| Specifies the main dimensions for the certain number of tool types, and the codified designation of dies and the marking. Details not indicated are left to the discretion of the... | |
| The best scale will be determined by taking into consideration, in particular, the two following contradictory tendencies: a scale with too wide steps involves a waste of materials and an... | |
| The document specifies the formula for the calculation. In this ratio, only sodium oxide and potassium oxide combined in the form of silicates is considered. Replaces ISO Recommendation R 1689-1970. | |
| The ISO 17572 series specifies location referencing methods (LRMs) that describe locations in the context of geographic databases and will be used to locate transport-related phenomena in an encoder system... | |
| The method consists in drying of a test portion, diluted with water and mixed with kieselguhr at 70 °C and at a pressure not exceeding 34 mbar. It is applicable... | |
| The method is applicable to the anhydrous product and to the monohydrat. It consists in drying of a test portion at 100 °C and a pressure not exceeding 135 mbar. | |
| The method specified are applicable directly to soluted mateials or materials soluble in boiling water. In case of solid chemicals not readily soluble in boiling water, a special preliminary treatment... | |
| The principle of the procedure based on titration of a test portion with a standard volumetric hydrochloric acid solution, in the presence of methyl orange as indikator. The alkalinity is... | |
| The procedure is based on evaporation to dryness of a test portion previously acidified with hydrochloric acid. Dissolution of the soluble salts, filtration and washing of the insoluble matter. Second... | |
| This document specifies a method for the determination of the gross heat of combustion (QPCS) of products at constant volume in a bomb calorimeter. This method is intended to be... | |
| This document — specifies communication service parameters presented by ITS station (ITS-S) application processes to the ITS-S management in support of automatic selection of ITS-S communication profiles in an ITS... | |
| This International Standard establishes criteria for the purity of photographic-grade 4-(N-ethyl-N-2-metha nesulfonyl-aminoethy l)-2-methylphenylene diamine sesquisulfate monohydrate and specifies the test methods to be used to determine the purity. | |
| Three cases, defined by a preliminary test, are envisaged: silicates containing neither sulphides nor chlorates; silicates containing sulphides; silicates containing chlorates. The method based on boiling of an acidified test... |
| << Prev | Next >> |