CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Describes a 9-track, 8 rows per mm (rpmm) (200 rows per inch (rpi)) 12,7 mm (0,5 in) wide magnetic tape for interchangeability of tape between information processing systems which utilize... | |
| Describes the materials, the tape wind, and the dimensions of magnetic tape used interchange instrumentation applications. Reference: ISO/R 1858, ISO/R 1860, ISO 2690. | |
| Gives the designations of installations of serrated bars for mechanical warp stop motions with support of figures and descriptions. Values in relation to the dimensions of the cross-section of assembled... | |
| Includes the dimensions of general purpose hubs and reels, with 76-mm (3 in) centrehole, designed for use with magnetic tape in interchange instrukentation applications. | |
| Includes the recorder/reproducer interface or envelope requirements for metal- and glass-flanged precision reels with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications. | |
| ISO 18437-1:2012 establishes the principles underlying ISO 18437-2 to ISO 18437-5 for the determination of the dynamic mechanical properties (i.e. elastic modulus, shear modulus, bulk modulus, loss factor, and Poisson... | |
| ISO 18437-2:2005 defines a resonance method for determining from laboratory measurements the dynamic mechanical properties of the resilient materials used in vibration isolators. It is applicable to shock and vibration... | |
| ISO 18437-3:2005 defines a cantilever shear beam method for determining from laboratory measurements the dynamic mechanical properties of the resilient materials used in vibration isolators. Common errors due to clamping... | |
| ISO 18437-4:2008 specifies a direct method for measuring the complex dynamic moduli of elasticity (the Young, shear and bulk moduli, and their respective loss factors corresponding to the tensile, shear... | |
| ISO 18437-5:2011 specifies two methods for estimating Poisson ratio or/and elastic modulus for isotropic visco-elastic or porous-elastic materials for use in linear finite element method (FEM) computer programs or other... | |
| ISO 18437-6:2017 specifies a standard method for the acquisition and analysis of data obtained using the test methods found in ISO 18437‑1 to ISO 18437‑5, ISO 6721‑4 to ISO 6721‑7... | |
| ISO 18438:2013 is one of a family of documents specifying the SOIS-compliant services to be provided by onboard subnetworks. ISO 18438:2013 defines services and service interfaces provided by the SOIS... | |
| ISO 18440:2016 defines a protocol for transfer of SLE PDUs between an SLE user and an SLE provider system in terms of: a) the procedures used to establish and release... | |
| ISO 18441:2016 defines the Application Program Interface in terms of: a) the components that provide the services of the API; b) the functionality provided by each of the components; c)... | |
| ISO 18442:2016 defines extensions to the SLE API in terms of: a) the RAF-specific functionality provided by API components; b) the RAF-specific interfaces provided by API components; and c) the... | |
| ISO 18443:2016 Practice defines extensions to the SLE API in terms of: a) the RCF-specific functionality provided by API components; b) the RCF-specific interfaces provided by API components; and c)... | |
| ISO 18444:2016 defines extensions to the SLE API in terms of: a) the ROCF-specific functionality provided by API components; b) the ROCF-specific interfaces provided by API components; and c) the... | |
| ISO 18445:2016 Practice defines extensions to the SLE API in terms of: a) the CLTU-specific functionality provided by API components; b) the CLTU-specific interfaces provided by API components; and c)... | |
| ISO 18446:2016 defines extensions to the SLE API in terms of: a) the FSP-specific functionality provided by API components; b) the FSP-specific interfaces provided by API components; and c) the... | |
| ISO 18451-1:2015 defines terms that are used in the field of pigments, dyestuffs and extenders. For some terms, reference is made to ISO 4618 in which also terms and definitions... | |
| ISO 18452:2005 specifies a method for the determination of the film thickness of a fine ceramic film and ceramic coatings by a contact-probe profilometer. The method is suitable for film... | |
| ISO 18453:2004 specifies a method to provide users with a reliable mathematical relationship between water content and water dew point in natural gas when one of the two is known. | |
| ISO 18454:2018 specifies the general conditioning and testing atmospheres for the evaluation of footwear and footwear component properties. ISO 18454:2018 defines two standard atmospheres for conditioning and testing of footwear... | |
| ISO 18457:2016 provides a framework of biomimetics for the development of materials, structures, surfaces, components, and manufacturing technologies. ISO 18457:2016 specifies the principles of biological systems, and especially the performance... | |
| ISO 18458:2015 provides a framework for the terminology on biomimetics in scientific, industrial, and educational purposes. ISO 18458:2015 is intended to provide a suitable framework for biomimetic applications. The field... | |
| ISO 18459:2015 specifies the functions and scopes of biomimetic structural optimization methods. They consider linear structural problems under static and fatigue loads. The methods described in ISO 18459:2015 are illustrated... | |
| ISO 18461:2016 specifies rules for the museum community on the collection and reporting of statistics. It provides definitions and counting procedures for all types of resources and services that museums... | |
| ISO 18465:2017 describes the quantitative analysis of the emetic toxin cereulide using high performance liquid chromatography (HPLC) or ultra performance liquid chromatography (UHPLC) connected to a tandem mass spectrometer (LC-MS/MS). | |
| ISO 18466:2016 enables the determination of the biogenic fraction in CO2 in stack gas using the balance method. The balance method uses a mathematical model that is based on... | |
| ISO 18468:2017 specifies the requirements and test methods applicable to factory applied epoxy coatings (fusion bonded or 2-pack liquid epoxy) for ductile iron fittings and accessories supplied to ISO 2531... | |
| ISO 18471:2015 a test method for the verification of filtration grade of filters intended for operation in agricultural irrigation systems. It is intended to be used for verifying the filter... | |
| ISO 18473-1:2015 specifies requirements and corresponding methods of test for surface treated nanoscale calcium carbonate in powder form for sealant application. | |
| ISO 18473-2:2015 specifies requirements and corresponding methods of test for nanoscale titanium dioxide in powder form for sunscreen application. This part of ISO 18473 covers the surface modified, TiO2. | |
| ISO 18473-3:2018 specifies requirements and corresponding methods of test for fumed silica in powder form for silicone rubber application. This document is applicable to untreated and surface treated fumed silica. | |
| ISO 18479-1:2015 defines design criteria and safety requirements for non-integrated personnel work platforms (PWPs) which, if approved for use on the rough-terrain truck, can be fitted and secured to the... | |
| ISO 18479-2:2016, intended to be used together with ISO 18479‑1 and ISO 10896‑1, defines user requirements for rough-terrain trucks when fitted with a non-integrated personnel work platform (PWP) as an... | |
| ISO 18481:2017 specifies a method for the estimation of the sub-critical flow of clear water in a smooth, essentially horizontal channel (or a gently sloping channel), abruptly discontinued at bottom... | |
| ISO 18487-1:2017 is applicable to seamless tubing of circular cross-section made from titanium alloy and intended for use primarily in systems with system operating pressure of 35 MPa (5 080... | |
| ISO 18488:2015 specifies a method for the determination of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene. The strain... | |
| ISO 18489:2015 specifies a method to determine the resistance to slow crack growth (SCG) of polyethylene materials, pipes, and fittings. The test is applicable to samples taken from compression moulded... | |
| ISO 18490:2015 specifies the form of the optotype, the quality requirements for the chart, the test procedure, and the acceptance level for near vision acuity of NDT personnel. It also... | |
| ISO 18495-1:2016 establishes a framework and architecture for data collection and to provide data definitions for visibility of vehicles, self-propelled construction machinery and agricultural equipment (hereinafter referred to as "automotives"... | |
| ISO 18504:2017 provides procedures on sustainable remediation. In particular, it provides: - standard methodology, terminology and information about the key components and aspects of sustainable remediation assessment; - informative advice... | |
| ISO 18512:2007 gives guidance on how to store and preserve soil samples for laboratory determinations and how to prepare them for analysis after storage. Special emphasis is given to maximum... | |
| ISO 18513:2003 defines terms used in the tourism industry in relation to the various types of tourism accommodation and other related services. | |
| ISO 18515:2014 specifies a method to determine the compressive strength of solid carbon and graphite materials at room temperature. | |
| ISO 18516:2006 describes three methods for measuring the lateral resolution achievable in Auger electron spectrometers and X-ray photoelectron spectrometers under defined settings. The straight-edge method is suitable for instruments where... | |
| ISO 18522:2016 specifies the procedures for determining the cross direction profiles of physical properties of paper and board using automated off-line testers. Where available for a given measurement, the relevant... | |
| ISO 18523-2:2018 specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings. The schedule and... | |
| ISO 18535:2016 specifies a procedure for and provides guidance on the determination of the coefficient of friction and the specific wear rate of diamond-like carbon (DLC) films. The method specifies... | |
| ISO 18537:2015 specifies the information to be recorded in wild-caught crustacean supply chains in order to establish the traceability of products originating from wild-caught crustacean. It specifies how crustacean products... | |
| ISO 18538:2015 specifies the information to be recorded in farmed molluscs supply chains (excluding cephalopods) in order to establish the traceability of products originating from farm-raised molluscs. It specifies how... | |
| ISO 18539:2015 specifies the information to be recorded in wild-caught molluscs supply chains in order to establish the traceability of products originating from wild-caught molluscs. It specifies how molluscan products... | |
| ISO 1854¦IDF 59:2008 specifies the reference method for the determination of fat content of whey cheese. The method is not applicable to products which do not dissolve completely in ammonia... | |
| ISO 18541-1:2014 provides a general overview and structure of each part of ISO 18541. It also specifies use cases related to repair and maintenance information (RMI) systems in order to... | |
| ISO 18541-2:2014 includes technical requirements which are related to automotive repair and maintenance information (RMI) systems in order to standardize access to RMI for independent operators. ISO 18541-2:2014 specifies the... | |
| ISO 18541-3:2014 includes functional user interface requirements related to automotive repair and maintenance information (RMI) systems in order to standardize access to RMI for independent operators. ISO 18541-3:2014 specifies all... | |
| ISO 18541-4:2015 specifies a conformance test for a vehicle manufacturer assessment of self-conformance of the VM RMI system. The conformance test cases follow the use case definition of ISO 18541‑1... | |
| ISO 18541-6:2018 contains all elements (definitions, use cases, technical requirements, functional user interfaces requirements and conformance test cases) applicable for the standardized access to repair and maintenance information for two-wheeled... | |
| ISO 18542 is structured in two parts: Part 1 defines a framework and a process for agreeing terms; Part 2 defines the process implementation requirements for a terminology management system... | |
| ISO 18542-2:2014 specifies: - the technical requirements that must be met by the Terminology Management system (TMS) that will be used to manage and store the 'Agreed RMI Terminology'; -... | |
| ISO 18543:2017 specifies the accelerated ageing test and requirements for electrochromic (EC) glazings. The test method described in ISO 18543:2017 is only applicable to chromogenic glazings that can be switched... | |
| ISO 18549-1:2009 describes a method for the determination of apparent density at elevated temperatures for powder mixes, based on iron or steel powders and intended for warm compaction. The method... | |
| ISO 18549-2:2009 describes two methods for the determination of the time (flow rate) it takes for a given quantity of a heated powder mix, based on iron or steel powders... | |
| ISO 18550:2016 specifies a test method for determining macro-heterogeneitie s within the microstructure of fine ceramics that are above a certain size within the volume of the material and affect... | |
| ISO 18554:2016 provides a simple procedure for identifying, estimating and correcting for unintended degradation in the elemental composition or chemical state of a material which occurs as a result of... | |
| ISO 18555:2016 specifies the method for determining the thermal conductivities of thermal barrier coatings consisting of metallic bond coats and ceramic top coats, in a direction normal to the coating... | |
| ISO 18556:2016 specifies requirements and their test methods for metallic and non-metallic intraoral spatulas used to introduce and model filling materials into a tooth cavity, including single use disposable items. | |
| ISO 18557 presents guidelines for sampling strategies and characterization processes to assess the contamination of soils, buildings and infrastructures, prior to remediation and/or to check that the remediation objectives have... | |
| ISO 18558:2015 specifies the testing method for determining the elastic modulus and bending strength of ceramic tubes or rings at ambient temperature by the compression tests on split ring pieces. | |
| ISO 18560-1:2014 specifies a test method for the determination of the air-purification performance of materials that contain a indoor-light-active photocatalyst or have indoor-light-active photocatalytic films on the surface, usually made... | |
| ISO 18562-1:2017 specifies: - the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are... | |
| ISO 18562-2:2017 specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or... | |
| ISO 18562-3:2017 specifies tests for the emissions of volatile organic compounds (vocs) from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory... | |
| ISO 18562-4:2017 specifies tests for substances leached by liquid water condensing into gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or... | |
| ISO 18563-1:2015 identifies the functional characteristics of a multichannel ultrasonic phased array instrument used for phased array probes and provides methods for their measurement and verification. ISO 18563-1:2015 can partly... | |
| ISO 18563-2:2017 specifies the characterization tests performed at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria. ISO 18563-2:2017 is applicable to... | |
| ISO 18563-3:2015 addresses ultrasonic test systems implementing linear phased array probes, in contact (with or without wedge) or in immersion, with centre frequencies in the range of 0,5 MHz?10 MHz. | |
| ISO 18564:2016 specifies all the information necessary for carrying out efficiently and under standardised conditions the noise emission values of self-propelled forestry machinery. It is applicable to fellers, bunchers, delimbers,... | |
| ISO 18565:2015 specifies the AFP document architecture by defining a subset appropriate for long-term preservation and retrieval. This subset will avoid ambiguity by assuring page independence and eliminating the use... | |
| ISO 18566-1:2017 specifies the design, test conditions and methods for the determination of the cooling and heating capacity and control of radiant heating and cooling panels with an open air... | |
| ISO 18566-2:2017 dry cooling only surfaces with an air gap between construction and the emitter (not embedded) with or without an insulation fed with water at temperatures below 120 °C... | |
| ISO 18566-3:2017 specifies the design of ceiling mounted radiant panels. ISO 18566-3:2017 is applicable to water-based heating and cooling panel systems (free hanging) in residential, commercial and industrial buildings. The... | |
| ISO 18566-4:2017 specifies the control of ceiling mounted radiant heating and cooling panels. The requirements in this document are applicable only to the components of the heating/cooling systems and the... | |
| ISO 18573:2012 specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. | |
| ISO 18580:2015 specifies the verification method of total running resistance force when the exhaust gas emissions and/or fuel consumption of motorcycles are measured during mode running on a chassis dynamometer. | |
| ISO 18582-1:2016 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of fluid power, and for the provision of this reference dictionary... | |
| ISO 18587:2017 provides requirements for the process of full, human post-editing of machine translation output and post-editors' competences. ISO 18587:2017 is intended to be used by TSPs, their clients, and... | |
| ISO 18589-1:2005 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling. ISO 18589-1:2005 is addressed to people responsible for determining the radioactivity present in soils... | |
| ISO 18589-2:2015 specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation... | |
| ISO 18589-3:2015 specifies the identification and the measurement of the activity in soils of a large number of gamma-emitting radionuclides using gamma spectrometry. This non-destructive method, applicable to large-volume samples... | |
| ISO 18589-4:2009 describes a method for measuring plutonium 238 and 239 + 240 isotopes in soil by alpha spectrometry samples using chemical separation techniques. The method can be used for... | |
| ISO 18589-5:2009 describes the principles for the measurement of the activity of 90Sr in equilibrium with 90Y and 89Sr, pure beta-emitting radionuclides, in soil samples. Different chemical... | |
| ISO 18589-6:2009 provides a method that allows an estimation of gross radioactivity of alpha- and beta-emitters present in soil samples. ISO 18589-6:2009 applies, essentially, to systematic inspections based on comparative... | |
| ISO 18589-7:2013 specifies the identification of radionuclides and the measurement of their activity in soil using in situ gamma spectrometry with portable systems equipped with germanium or scintillation detectors. ISO... | |
| ISO 18591:2015 specifies the testing method to determine the compressive strength of ceramic granules, when subjected to uniaxial compressive loading in a confining die, under specified conditions. | |
| ISO 18592:2009 specifies test specimens and procedures for performing constant load amplitude fatigue tests on multi-spot-welded and multi-axial specimens in the thickness range from 0,5 mm to 5 mm at... | |
| ISO 18594:2007 specifies the procedure and the experimental set-up for determining the transition resistance of a single sheet or two overlapping sheets of aluminium or steel, with or without surface... | |
| ISO 18595:2007 specifies requirements for resistance spot welding in the fabrication of assemblies of aluminium sheet, extrusions (both work- and age-hardening alloys) and/or cast material comprising two or three thicknesses... | |
| ISO 18596:2015 specifies a test method for a staple length of dehaired cashmere by a hand-arranging method. ISO 18596:2015 is also applicable to dehaired camel, dehaired yak, etc. | |
| ISO 18599:2015 specifies the dimensions and execution of strips for water nozzle solidification including their designation. | |
| ISO 185:2005 specifies the properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour. ISO... | |
| ISO 18600:2015 defines terms of the card with a web-forming method using staple fibres for non-woven machinery. | |
| ISO 18601:2013 specifies requirements and procedures for the other International Standards in this series on packaging and the environment: ISO 18602, ISO 18603, ISO 18604, ISO 18605, and ISO 18606. | |
| ISO 18602:2013 specifies requirements and a procedure for assessment of packaging to ensure that the weight or volume of its material content is optimized consistent with the functions of packaging. | |
| ISO 18603:2013 specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of meeting the requirements, including the associated systems. The procedure for... | |
| ISO 18604:2013 specifies the requirements for packaging to be classified as recoverable in the form of material recycling while accommodating the continuing development of both packaging and recovery technologies and... | |
| ISO 18605:2013 specifies the requirements for packaging to be classified as recoverable in the form of energy recovery and sets out assessment procedures for fulfilling the requirements. ISO 18605:2013 is... | |
| ISO 18606:2013 specifies procedures and requirements for packaging that are suitable for organic recycling. Packaging is considered as recoverable by organic recycling only if all the individual components meet the... | |
| ISO 18608:2017 describes a method for the classification of ceramic matrix composite (CMC) materials with respect to their sensitivity to crack propagation using tensile tests on notched specimens with different... | |
| ISO 18610:2016 specifies an ultrasonic method to determine the components of the elasticity tensor of ceramic matrix composite materials at room temperature. Young's moduli shear moduli and Poisson coefficients, can... | |
| ISO 18611-1:2014 specifies the quality characteristics of the marine NOx reduction agent, aqueous urea solution at 40 % concentration (AUS 40), which is needed to operate so-called SCR (selective catalytic... | |
| ISO 18611-2:2014 specifies test methods required for the determination of the quality characteristics of the NOx reduction agent AUS 40 (aqueous urea solution) specified in ISO 18611-1. In the remaining... | |
| ISO 18611-3:2014 describes best practice recommendations and requirements for handling, transportation, and storage of NOx reduction agent AUS 40 (aqueous urea solution), specified in ISO 18611-1. These recommendations and requirements... | |
| ISO 18613:2014 specifies the maximum defects and damage allowed before a flat wooden pallet shall be repaired, and defines the minimum repair criteria that shall be used. ISO 18613:2014 is... | |
| ISO 18616-1:2016 specifies the four main types of reusable, rigid plastic distribution boxes for general purpose application in the fields of handling, transport, storage and display of products in distribution... | |
| ISO 18616-2:2016 specifies the test methods for handling and managing reusable, rigid plastic distribution boxes. These boxes are based on the modular area 600 mm × 400 mm, 600 mm... | |
| ISO 18619:2015 specifies a procedure, including computation, by which a transform between ICC profiles can be adjusted (compensated) to take into account differences between the dark end of the source... | |
| ISO 18620:2016 specifies a simple extensible format for the exchange of tone adjustment curves between applications including but not limited to colour management, calibration and raster image processor systems. | |
| ISO 18626:2017 specifies the transactions between libraries or libraries and other agencies to handle requests for library items and the following exchange of messages. | |
| ISO 18629-11:2005 provides a representation of the concepts of PSL Core using a set of axioms written in the basic language of ISO 18629. The representation of the concepts common... | |
| ISO 18629-12:2005 provides a representation of the concepts that belong to the outer core of the language, through a set of axioms and definitions. These axioms provide an axiomatization of... | |
| ISO 18629-13:2006 provides a description of the duration and ordering core theories in ISO 18629, which defines elements needed by most of the extensions of the process specification language (PSL)... | |
| ISO 18629-14:2006 provides a description of the resource theories of ISO 18629, which defines elements needed for defining resources, resource roles, and resource sets. | |
| ISO 18629-1:2004 provides a general overview of the different series of parts of ISO 18629, which defines a process specification language aimed at identifying, formally defining and structuring the semantic... | |
| ISO 18629-41:2006 provides definitions written in the language of ISO 18629 for concepts related to activity extensions in the process specification language. The process specification language is aimed at structuring... | |
| ISO 18629-42:2006 provides definitions written in the language of ISO 18629 for concepts related to activity extensions in the process specification language. The process specification language is aimed at structuring... | |
| ISO 18629-43:2006 provides definitions written in the language of ISO 18629 for concepts related to activity extensions in the process specification language. The process specification language is aimed at structuring... | |
| ISO 18629-44:2006 provides definitions written in the language of ISO 18629 for concepts related to activity extensions in the process specification language. The process specification language is aimed at structuring... | |
| ISO 18635:2016 specifies a method for the quantitative determination of the sum of short-chain polychlorinated n-alkanes also known as short-chain polychlorinated paraffins (SCCPs) in the carbon bond range, n-C10... | |
| ISO 18639 series of standards specify requirements of personal protective equipment (PPE) specifically designed to protect firefighters from injury and/or loss of life while engaged in specific rescue activities. ISO... | |
| ISO 18639-3:2018 specifies test methods and minimum performance requirements for protective clothing for firefighters while engaged in rescue activities. Clothing related to specific rescue activities are documented in individual subclauses,... | |
| ISO 18639-6:2018 provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for safety footwear for firefighters while engaged in specific... | |
| ISO 18646-1:2016 describes methods for specifying and evaluating the locomotion performance of wheeled robots in indoor environments. | |
| ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs on offshore fixed platforms. The modular drilling rig includes some or all of... | |
| ISO 18649:2004 provides methodology for the evaluation of results from dynamic tests and investigations on bridges and viaducts. It complements the procedure for conducting the tests as given in ISO... | |
| ISO 18650-1:2004 establishes additional terminology to describe the functioning and the required and optional components for various types of concrete mixers. The content of commercial literature specifications for these types... | |
| ISO 18650-2:2014 specifies the procedure and requirements for examination of the mixing efficiency of batch-type and continuous-type concrete mixers as defined in ISO 18650-1. It is applicable to concrete mixers... | |
| ISO 18651:2011 specifies the terminology and gives commercial specifications for internal vibrators used for concrete mix compaction. | |
| ISO 18652:2005 defines terms and specifies the classification, performance requirements, test methods, designation and commercial specifications of external vibrators for concrete. It is applicable only to those power-driven external vibrators... | |
| ISO 18653:2003 specifies methods for the evaluation of measuring instruments used for gear measurements of involute, helix, pitch and runout. It is applicable both to instruments that measure runout directly... | |
| ISO 18662-1:2017 specifies the basic vocabulary for the Chinese Materia Medica (CMM), including most commonly used CMM species. Each term is provided a Latin name, Chinese name, Pinyin name and... | |
| ISO 18664:2015 specifies determination methods of lead (Pb), arsenic (As), cadmium (Cd) and mercury (Hg) in herbal medicines used in Traditional Chinese Medicine (TCM). It is applicable to natural materials... | |
| ISO 18665.2015 specifies the general requirements of herbal decoction apparatus with design pressures less than 0,1MPa. It includes both hermetic and non-hermetic decoction apparatus. It is applicable to the herbal... | |
| ISO 18666:2015 specifies the general requirements for configuration, materials, performance and safety requirements of moxibustion devices. It also specifies the minimum requirements for moxibustion materials used in moxibustion devices. It... | |
| ISO 18668-1:2016 specifies rules to encode Chinese medicines, including decoction pieces, Chinese Materia Medica (raw materials) and granule forms of individual medicinals for prescriptions (GFIMP), but not Chinese patent medicines... | |
| ISO 18668-2:2017 encodes 828 kinds of decoction pieces, according to the rules in ISO 18668-1. This document is suitable for coding of decoction pieces, as well as decoction pieces in... | |
| ISO 18668-3:2017 encodes 592 kinds of Chinese Materia Medica, according to the rules in ISO 18668‑1. ISO 18668-3:2017 is suitable for coding of Chinese Materia Medica, as well as Chinese... | |
| ISO 18668-4:2017 encodes 777 kinds of granule forms of individual medicinals for prescriptions, according to the rules in ISO 18668‑1. ISO 18668-4:2017 is suitable for coding of granule forms of... | |
| ISO 18669-1:2013 specifies the essential dimensional characteristics of piston pins with an outer diameter between 8 mm and 100 mm, for reciprocating internal combustion engines for road vehicles and other... | |
| ISO 18669-2:2004 defines the measuring principles to be used for measuring piston pins; it applies to piston pins from 8 mm up to and including 100 mm outside diameter for... | |
| ISO 18672-1:2009 specifies definitions, requirements and characteristics of pipes, fittings, joints, materials, test methods and marking for pipes and fittings made from polyester resin concrete (PRC), intended to be used... | |
| ISO 18674-1:2015 lays out the general rules for the performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills, and of geotechnical works. Specifically, it applies... | |
| ISO 18674-2:2016 specifies the measurement of displacements along a line by means of extensometers carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting... | |
| ISO 18674-3:2017 specifies the measurement of displacements across a line by means of inclinometers carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting... | |
| ISO 18676:2017 presents the guidelines for the management of systems engineering for space systems. ISO 18676:2017 addresses the systems engineering activities and provides guidelines for interfacing with specific major management... | |
| ISO 18682:2016 specifies basic requirements for systems to execute notifications such as warning and awareness messages to provide hazard information to a driver. Requirements include principle of notifying, timing of... | |
| ISO 18692:2007 specifies the main characteristics and test methods of new polyester fibre ropes used for offshore stationkeeping. | |
| ISO 18695:2007 is applicable to any textile fabric, which may or may not have been given a water-resistant or water-repellent finish. It measures the resistance of fabrics to the penetration... | |
| ISO 18696:2006 is applicable to any textile fabric, which may or may not have been given a water-resistant or water-repellent finish. It measures the resistance of fabrics to wetting by... | |
| ISO 1871:2009 provides general guidelines for the determination of nitrogen by the Kjeldahl method. It applies to food and feed products containing nitrogenous compounds that can be directly determined by... | |
| ISO 18739:2016 specifies terms, synonyms for terms and definitions used in the process chain for CAD/CAM systems in dentistry. | |
| ISO 18740:2016 applies to any fixed (constant) speed, liquid cooled, packaged centrifugal air compressor which incorporates a centrifugal compression element of any type driven by an electric motor. It defines... | |
| ISO 18743:2015 specifies a method of detection of Trichinella spp. muscle stage larvae in meat of individual animal carcasses intended for human consumption. It is applicable to the examination of... | |
| ISO 18744:2016 specifies a method that is applicable for the detection and enumeration of Cryptosporidium oocysts and Giardia cysts on or in food products that are described herein as fresh... | |
| ISO 18746:2016 specifies the requirements of sterile intradermal acupuncture needle for single use as a medical device, including the following factors: a) size; b) material; c) quality; d) testing methods; | |
| ISO 18747-1:2018 specifies a method for the determination of the density of solid particles or liquid droplets (below referred to generically as "particles") dispersed in a liquid. The method is... | |
| ISO 18749:2004 specifies a screening test method for the determination of the degree of adsorption of substances on to the activated sludge or primary sludge in a waste water treatment... | |
| ISO 18752:2014 specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each... | |
| ISO 18753:2017 specifies a method for determining the absolute particle density of fine ceramic powders or sintered parts using liquid pycnometry. NOTE Other pycnometer methods like gas pycnometers (e.g. helium... | |
| ISO 18754:2013 specifies methods for the determination of the apparent solid density, bulk density, apparent density and geometric bulk density of fine ceramics. | |
| ISO 18755:2005 specifies the test method for the determination of thermal diffusivity from room temperature to 1700 K by the laser flash method for homogeneous monolithic ceramics with porosity less... | |
| ISO 18756:2003 describes a test method that covers the determination of fracture toughness of monolithic ceramic materials at room temperature by the surface crack in flexure (SCF) method. This International... | |
| ISO 18757:2003 provides guidelines for the determination of the total specific external and internal surface area of disperse or porous (pore diameter greater than 2 nm) fine ceramic materials by... | |
| ISO 18762:2016 specifies requirements for the manufacture of welded tubes made from titanium or titanium alloys, for use in condensers and heat exchangers. | |
| ISO 18763:2016 describes a technique for determining the effects of soil and soil-related materials on the seed germination and early growth of higher plants. These endpoints are useful indicators for... | |
| ISO 18766:2014 provides a general introduction to, and guidance on, the methods of test for low temperature properties of vulcanized and thermoplastic rubbers. It is intended to provide an understanding... | |
| ISO 18770:2005 specifies the measures to be taken to reduce fires originating from machinery-space flammable oil systems and to prevent leakage of flammable oil. It is intended for designers, shipyard... | |
| ISO 18772:2008 provides guidance on the appropriate use of leaching tests on soil and soil materials, in order to determine the leaching behaviour in the framework of impact assessment, or... | |
| ISO 18774:2015 defines and describes rules for an internationally valid system for building short names of any kind of financial instrument within a defined structure. This International Standard is intended... | |
| ISO 18775:2008 establishes the standard terms and definitions (including those relative to features and defects), the methods for the determination of physical characteristics and the tolerances for dimensions (length, width,... | |
| ISO 18776:2008 specifies the requirements for Laminated Veneer Lumber (LVL) for general purposes and structural applications, in dry, tropical-dry/humid or high humidity/exterior conditions. Laminated Veneer Lumber (LVL) is a general... | |
| ISO 18777:2005 specifies requirements for the safety and essential performance of transportable liquid oxygen systems which are used as a supply source for oxygen therapy. These devices usually consist of... | |
| ISO 18778:2005 specifies requirements for the safety and essential performance of monitors used to detect apparent life-threatening events in sleeping or resting children under three years of age. This International... | |
| ISO 18782:2015 specifies a test method for the determination of hygroscopic heat generated by flowing low then high humidity air on one side of a surface. It is applicable to... | |
| ISO 18787:2017 establishes basic principles and specifies requirements for the methods of determining water activity (aw) of food products for human consumption and animal feed within a measurement... | |
| ISO 18788:2015 provides a framework for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the management of security operations. It provides the principles and requirements for a security operations management... | |
| ISO 18794:2018 defines terms relating to coffee sensory analysis. ISO 18794:2018 covers definitions applicable to green, roasted and ground coffee, coffee extracts and soluble coffee. The terms are given under... | |
| ISO 18797-1:2016 specifies the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of external coating for steel risers pipes used in the splash zone,... | |
| ISO 18804 specifies rim dimensions for rims for agricultural, forestry, and construction machines. All dimensions in ISO 18804 are given in millimetres and are applicable to the side of rim... | |
| ISO 18805:2017 specifies the classification codes for agricultural and forestry tractors and machines. | |
| ISO 18812:2003 specifies general messages for electronic information exchange between analytical instruments (AIs) and laboratory information systems (LISs) within a clinical laboratory. It is applicable to the specialities of clinical... | |
| ISO 18813:2006 specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life... | |
| ISO 18825-1:2016 covers vocabulary and terminology used for the virtual human body in the virtual garment system used as a main tool in various fields of clothing application. It is... | |
| ISO 18825-2:2016 defines the terms used to describe the virtual human body which is used in virtual garment systems. Specifically, virtual body landmarks and virtual body dimensions are described. It... | |
| ISO 18828-2:2016 describes a reference planning process for seamless production planning. The scope of the discussed reference process focusses on the planning of production systems such as make-to-stock or assemble-to-order... | |
| ISO 18828-3:2017 describes the information flows identified for each planning discipline within production planning, according to ISO 18828‑2. The following aspects are within the scope of ISO 18828-3:2017: · general... | |
| ISO 18829:2017 identifies activities and operations that an organization needs to perform, or have performed, to evaluate whether the electronically stored information (ESI) is or was maintained in a reliable... | |
| ISO 18830:2016 specifies a test method to determine the degree and rate of aerobic biodegradation of plastic materials when settled on marine sandy sediment at the interface between seawater and... | |
| ISO 18831:2016 defines the attributes required to produce virtual garments, including virtual hats and virtual gloves using virtual garment software. | |
| ISO 18835:2015 specifies basic safety and essential performance requirements for anaesthetic systems utilizing the draw-over method to provide inhalational anaesthesia. Requirements are included to allow the use of these systems... | |
| ISO 18841:2018 specifies basic requirements for the provision of interpreting services. Additionally, it provides recommendations of good practice. NOTE Interpreting specializations/spec ialized interpreting services can be covered in other International... | |
| ISO 18842:2015 describes methods for the determination of tapped and untapped bulk density of smelter grade aluminium oxide primarily used for the production of aluminium. Methods using the fall of... | |
| ISO 18843:2015 sets out a method for determining the amount of time taken for a given quantity of smelter-grade alumina to flow by gravity through a precisely constructed standard funnel. | |
| ISO 18844:2017 specifies the definition of image flare for digital cameras, test patterns, measurement conditions, and methods, so as to enable the comparison of the results of measurement. The methods... | |
| ISO 18846:2016 specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole. | |
| ISO 18847:2016 specifies the method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination... | |
| ISO 18851:2015 specifies methods of test for fittings of any form, i.e. bends, branches, tapers, intended to be used in plastics piping systems for pressure and non-pressure drainage and sewerage... | |
| ISO 18852:2015 specifies a method for the determination of the nitrogen surface area (NSA) of carbon blacks and other rubber compounding ingredients, like silicas and zinc oxides, based on the... | |
| ISO 18854:2015 specifies the measurement and evaluation methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines under steady-state conditions on a test bed, necessary for determining... | |
| ISO 18856:2004 specifies a method for the determination of phthalates in water after solid phase extraction and gas chromatography/mass spectrometry. This method is applicable to the determination of phthalates in... | |
| ISO 18857-1:2005 specifies a method for the determination of 4-nonylphenol (mixture of isomers) and 4-(1,1,3,3-tetrameth ylbutyl)phenol in non-filtered samples of drinking water, ground water and surface water. The method is... | |
| ISO 18857-2:2009 specifies a gas chromatographic-mass spectrometric (GC‑MS) determination of selected alkylphenols, their ethoxylates and bisphenol A in non-filtered samples of drinking, ground, surface, and waste waters following solid‑phase extraction... | |
| ISO 18862:2016 specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction and determination by HPLC-MS/MS and GC-MS. It was... | |
| ISO 18868:2013 defines different multiple-vehicle combinations (vehicle combinations with more than one coupling point) and the formulae to calculate the requirement of performance for the coupling equipment used in those... | |
| ISO 18869:2017 specifies methods for testing and evaluating the performance of quick-action couplings for use in hydraulic fluid power applications. This document does not apply to the testing of tube... | |
| ISO 18871:2015 provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. It shall be also applied to drill cuttings... | |
| ISO 18872:2007 specifies procedures for determining the tensile properties of moulding and extrusion plastics over a wide range of strain rate, including high rates appropriate to impact-loading situations. Properties are... | |
| ISO 18875:2015 provides terminology on geology and exploration, engineering construction, field development and production in coalbed methane industry. This International Standard does not contain surface gathering. | |
| ISO 18878:2013 provides methods for preparing training materials and administering standardized training to operators (drivers) of mobile elevating work platforms (MEWPs). It is applicable to MEWPs, as defined in ISO... | |
| ISO 1887:2014 specifies a method for the determination of the combustible-matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped strands, milled fibres, fabrics,... | |
| ISO 18885-1:2017 defines the characteristics of the tyre pressure monitoring system (TPMS) snap-in valve. Methods for identification and traceability of the valve are recommended. These parameters are defined to facilitate... | |
| ISO 18886:2016 specifies the procedures for the preparation of test pieces from refractory materials by wet gunning at ambient temperatures. The test pieces are for the determination of properties on... | |
| ISO 18888:2017 specifies standard rules for preparing, conducting, evaluating and reporting thermal performance tests on combined cycle and cogeneration power plants driven by gas turbines for base and part load... | |
| ISO 1888:2006 specifies longitudinal-profile and transverse-section methods for determining the average diameter (i.e. the average value of actual diameters) of staple fibres or filaments in a textile glass product. This... | |
| ISO 18890:2018 defines the main measurement points and describes the method used to measure garment dimensions. Additional measurement points can be determined between interested parties. | |
| ISO 18893:2014 applies to all mobile elevating work platforms (MEWPs) that are intended to position persons, tools and materials and which, as a minimum, consists of a work platform with... | |
| ISO 18894:2018 specifies the equipment and techniques used for determining lump-coke (nominal top size >20 mm) reactivity in carbon dioxide gas at elevated temperatures and its strength after reaction in... | |
| ISO 18895:2006 specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of... | |
| ISO 18896:2018 specifies a method for assessing the stiffness in the longitudinal direction of steel shanks used for the reinforcement of the waist region of women's shoes and of some... | |
| ISO 18899:2013 outlines the principles of calibration of rubber test equipment and gives guidance on the general requirements for ensuring measurement traceability, establishing the basis for deciding calibration intervals, and... | |
| ISO 188:2011 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given: Method A: air-oven method using a cell-type oven or cabinet oven with... | |
| ISO 18901:2010 establishes the specifications for photographic films intended for the storage of records. ISO 18901:2010 is applicable specifically to films with a base of safety cellulose ester or polyester... | |
| ISO 18902:2013 specifies the principal physical and chemical requirements for album, storage and framing materials to prevent damage to processed or printed imaging materials over time. It covers requirements for:... | |
| ISO 18903:2002 specifies a method for determining the dimensional change of photographic films and papers caused by: variations in equilibrium moisture content due to change in the relative humidity (RH)... | |
| ISO 18905:2002 establishes specifications for the stability of polyester-base safety film which has an ammonia-processed diazo photographic image. It is applicable only to diazo photographic films intended for and used... | |
| ISO 18907:2013 specifies a method for determining and expressing quantitatively the brittleness of photographic film and papers. The method is applicable to films with or without a gelatin backing and... | |
| ISO 18909:2006 describes test methods for determining the long-term dark storage stability of colour photographic images and the colour stability of such images when subjected to certain illuminants at specified... | |
| ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one... | |
| ISO 1891-2:2014 specifies terms and definitions for fastener coatings, primarily intended for corrosion protection and functional purposes. These terms are mainly intended for use in conjunction with ISO 4042, ISO... | |
| ISO 18911:2010 provides recommendations concerning the storage conditions, storage facilities, handling and inspection for all processed safety photographic films in roll, strip, aperture‑card or sheet format, regardless of size. ISO... | |
| ISO 18912:2002 establishes specifications for the stability of polyester-base safety film which has a heat-processed vesicular photographic image formed by nitrogen bubbles. It is applicable only to vesicular photographic film... | |
| ISO 18913:2012 establishes a vocabulary of terms and definitions used in relation to the permanence of imaging materials, related storage materials and digital storage media. | |
| ISO 18914:2013 specifies a laboratory test method for determining the resistance of photographic emulsions or gelatin backings to abrasion damage during processing. This method may be used to determine the... | |
| ISO 18916:2007 specifies the procedure for the photographic activity and dye coupler reactivity tests. ISO 18916:2007 is applicable to general photographic enclosure materials such as paper, tissue, cardboard, mat board... | |
| ISO 1891:2009 provides translation guidance for terms commonly used to describe fasteners. ISO 1891:2009 lays down the terminology of fasteners in English, French and Russian, recommended for use unless otherwise... | |
| ISO 18920:2011 specifies dark storage conditions, storage facilities and procedures for the handling and inspection of reflection prints of all types and sizes. ISO 18920:2011 is applicable to: · prints... | |
| ISO 18921:2008 specifies a test method for estimating the life expectancy (LE) of information stored on compact disc (CD-ROM) media, including CD audio, but excluding recordable media. Only the effects... | |
| ISO 18922:2002 is applicable to evaluating the scratch resistance of dry, processed photographic film. It specifies two test methods for evaluating the scratch resistance on either the emulsion or the... | |
| ISO 18924:2013 specifies a test method for the prediction of certain physical or chemical property changes of imaging materials. ISO 18924:2013 is applicable to the Arrhenius test portion of ISO... | |
| ISO 18926:2012 specifies a test method for estimating the life expectancy (LE) of information stored on rewritable and write-once magneto-optical media. Only the effects of temperature and relative humidity on... | |
| ISO 18927:2013 specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media... | |
| ISO 18928:2013 specifies recommended storage conditions for unprocessed photographic materials. ISO 18928:2013 is applicable to black-and-white and colour photographic materials (negative films, positive films, reversal films, positive papers, and X-ray... | |
| ISO 18929:2012 establishes the specifications for silver-gelatin photographic reflection prints intended for dark storage. It covers silver-gelatin print types of all weights. ISO 18929:2012 applies to wet-processed black-and-white silver-gelatin photographic... | |
| ISO 18932:2009 provides specifications for adhesive mounting materials for use in attaching prints, including photographic, electrophotographic, electrostatic, thermal transfer or inkjet prints to mounting boards, album leaves, file cards and... | |
| ISO 18934 provides suggested guidelines for four temperature and humidity macro-environments for archives that contain a variety of recording media, based on the corresponding ISO storage standards for those media. | |
| ISO 18937:2014 describes test equipment and procedures for measuring the light stability of images of colour photographic reflection prints designed for display in, for example, houses, apartments, other dwelling places,... | |
| ISO 18938:2014 establishes general principles for the care and handling of digital optical discs during use. It addresses the issues of physical integrity of the medium necessary to preserve access... | |
| ISO 18939:2013 establishes test methods for measuring the stability of photographic films intended for storage of medical records. It is applicable to greyscale images on films for use in transmission... | |
| ISO 1893:2007 specifies a method for determining the deformation of dense and insulating shaped refractory products, when subjected to a constant load under conditions of progressively rising temperature (or refractoriness... | |
| ISO 18941:2017 describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed... | |
| ISO 18943:2014 concerns the storage, care, and handling of HDDs. It recommends handling procedures to maximise the effective life of the data written on magnetic HDDs. Faulty care and handling... | |
| ISO 18946:2012 describes test methods for evaluating reflection colour photographic prints with regard to changes in image appearance resulting from exposure to both low and high relative humidity. The observed... | |
| ISO 18947:2013 specifies tests to determine the abrasion, scuff and smudge resistance of photographic images. It is applicable to photographic prints and photo books prepared by digital and analogue processes. | |
| ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns. It is applicable to all types of yarn, including... | |
| ISO 19001:2013 specifies requirements for information supplied by the manufacturer with reagents used in staining in biology. It applies to producers, suppliers and vendors of dyes, stains, chromogenic reagents and... | |
| ISO 19003:2006 provides guidance on the application of statistics to rubber testing. It is intended not to conflict with or replace existing International Standards covering basic statistical techniques, but rather... | |
| ISO 19004:2004 describes how test sensitivity can be determined for test methods used to measure typical physical and chemical properties of rubber and rubber products. It is also applicable to... | |
| ISO 19005-1:2005 specifies how to use the Portable Document Format (PDF) 1.4 for long-term preservation of electronic documents. It is applicable to documents containing combinations of character, raster and vector... | |
| ISO 19005-2:2011 specifies the use of the Portable Document Format (PDF) 1.7, as formalized in ISO 32000-1, for preserving the static visual representation of page-based electronic documents over time. ISO... | |
| ISO 19005-3:2012 specifies the use of the Portable Document Format (PDF) 1.7, as formalized in ISO 32000-1, for preserving the static visual representation of page-based electronic documents over time in... | |
| ISO 19007:2018 specifies a method for evaluating the effects of nano-objects and their aggregates and agglomerates (NOAA) on cellular viability using the MTS assay. The assay design includes performance requirements... | |
| ISO 19008:2016 describes the standard cost coding system (SCCS) that classifies costs and quantities related to exploration, development, operation and removal of oil and gas production and processing facilities and... | |
| ISO 19009:2015 applies to requirements and testing for navigation lights with permanently fixed light emitting diode (LED) assemblies for small craft up to 24 m length of the hull. | |
| ISO 19012-1:2013 specifies the use of the marking "Plan" on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. ISO... | |
| ISO 19012-2:2013 specifies classes of chromatic correction and defines minimum requirements regarding chromatic correction. The defined marking on the component enables the operator to correctly use the microscope. The standard... | |
| ISO 19012-3:2015 specifies the relation of spectral characteristics between optical design and the description to microscope users for the spectral transmittance of objectives, as the guideline. NOTE This part of... | |
| ISO 19013-1:2005 specifies the requirements for rubber tubing and hoses used in diesel fuel circuits for internal combustion engines. The diesel fuels covered include 'bio-diesels' which consist of the methyl... | |
| ISO 19013-2:2016 specifies the requirements for rubber tubing and hoses used in gasoline fuel circuits for internal combustion engines. The gasoline fuels covered include those containing oxygenates such as methanol... | |
| ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste. Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following: -... | |
| ISO 19018:2004 contains terms, abbreviations and graphical symbols, which are to be used in maritime navigation on board ships. The application of abbreviations is useful, but they should not be... | |
| ISO 19019:2005 provides ship owners, designers, shipbuilders and trial crew with basic instructions for the planning, carrying out and reporting of sea trials. ISO 19019:2005 provides general information for achieving... | |
| ISO 19020:2017 specifies a screening method for the detection of staphylococcal enterotoxins SEA, SEB, SECs, SED and SEE in foodstuffs. It consists of two main steps: a) extraction followed by... | |
| ISO 19023:2018 specifies requirements and test methods for orthodontic anchor screws used in orthodontic treatment. ISO 19023:2018 gives details of methods to compare physical and mechanical properties of orthodontic anchor... | |
| ISO 19026:2015 specifies shapes and colours of a flushing button and a call button of lavatory which are installed on the wall and their arrangement with a paper dispenser. This... | |
| ISO 19027:2016 specifies basic configurations for communication support boards, which are necessary to facilitate communication. A variety of communication support boards can be designed for specific communication purposes. This International... | |
| ISO 19028:2016 specifies information contents, figuration and display methods of tactile guide maps providing location information of buildings, including those for the general public, public transport and parks, and also... | |
| ISO 19029:2016 specifies the sound characteristics of auditory guiding signals for persons with seeing impairment and blindness to provide the location and direction information of particular public facilities. The public... | |
| ISO 19030-1:2016 outlines general principles for the measurement of changes in hull and propeller performance and defines a set of performance indicators for hull and propeller maintenance, repair and retrofit... | |
| ISO 19030-2:2016 defines the default method for measuring changes in hull and propeller performance and calculating a set of basic performance indicators. Finally, it provides guidance on the expected accuracy... | |
| ISO 19030-3:2016 outlines alternatives to the default method. Some will result in lower overall accuracy but increase applicability of the standard. Others can result in same or higher overall accuracy... | |
| ISO 19043:2015 specifies a method for the determination of total phosphate content of natural rubber latex concentrate. This method is not necessarily suitable for latex from natural sources other than... | |
| ISO 19044:2016 specifies the test method for the load-displacement curves of fibre-reinforced cementitious composites (FRCC) by three-point loading of notched prisms. The main purpose of this test is to evaluate... | |
| ISO 19045:2015 specifies a method for evaluating the potential of products for contact lens disinfection to induce encystment of Acanthamoeba species. This method excludes the evaluation of oxidative systems that... | |
| ISO 19049:2016 defines the test method for horizontal diaphragms including floors and horizontal and sloped roofs under static loads. This test method is designated to evaluate the static shear capacity... | |
| ISO 19050:2015 describes the method of determination of both major and trace levels of metal contents in rubber ? raw, vulcanized ? by ICP-OES. | |
| ISO 19051:2015 specifies a test method for the determination of nitrogen content of raw natural rubber using the Micro Dumas combustion method. This method is also applicable to natural rubber... | |
| ISO 19054:2005 specifies basic requirements to ensure compatibility between rail systems complying with this International Standard and medical equipment in order to facilitate the transfer of medical equipment from one... | |
| ISO 19055:2015 specifies the minimum requirements regarding image quality and viewing ergonomics for binocular tubes for compound microscopes when used with eyepieces as specified by the manufacturer. ISO 19055:2015 makes... | |
| ISO 19056-1:2015 specifies procedures for the measurement of image brightness and uniformity for bright field light microscopy. These measurements for image brightness and uniformity are defined in image planes or... | |
| ISO 19062-1:2015 establishes a system of designation for acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials, which may be used as the basis for specifications. The types of ABS plastic are... | |
| ISO 19063-1:2015 establishes a system of designation for impact-resistant polystyrene (PS-I) moulding and extrusion materials, which may be used as the basis for specifications. The types of impact-resistant polystyrene plastic... | |
| ISO 19064-1:2015 establishes a system of designation for styrene/acrylonitril e (SAN) moulding and extrusion materials, which may be used as the basis for specifications. The types of styrene/acrylonitril e plastic... | |
| ISO 19065-1:2014 establishes a system of designation for acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials, which may be used as... | |
| ISO 19066-1:2014 establishes a system of designation for methyl methacrylate-acrylon itrile-butadiene-sty rene (MABS) moulding and extrusion materials, which can be used as the basis for specifications. The types of MABS... | |
| ISO 19069-1:2015 establishes a system of designation for polypropylene (PP) thermoplastic material, which can be used as the basis for specifications. The types of polypropylene plastics are differentiated from each... | |
| ISO 19069-2:2016 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polypropylene (PP) moulding and extrusion materials. Requirements for... | |
| ISO 19070:2016 specifies a method to determine the amount of N-methyl-2-pyrrolido ne (NMP) in leather and leather components. This method may also be used for the determination of N-ethyl-2-pyrrolidon e... | |
| ISO 19071:2016 specifies a test method for the determination of chromium (VI) content in chromium tanning agents. The results give information about the reductive potential of the chromium tanning agent. | |
| ISO 19072-1:2014 defines the minimum specification of the pyrotechnic device pocket interface. | |
| ISO 19072-2:2013 defines the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle. Performance criteria... | |
| ISO 19074:2015 specifies a method for determining the rate of absorption of water by capillary action or wicking in leathers. It is applicable to all types of leather. | |
| ISO 19076:2016 provides a method for the measurement of the surface of leather or leather parts by the use of electronic measuring machines. It applies to the measurement of leather... | |
| ISO 19078:2013 specifies the requirements for the inspection, installation and requalification of high pressure cylinders, designed and manufactured in accordance with the requirements of ISO 11439, for the on-board storage... | |
| ISO 19079:2016 describes the networking protocol functionality related to 6LoWPAN networking between two or more ITS stations communicating over the global Internet communication network. It is assumed that the reader... | |
| ISO 19080:2016 describes the CoAP facilities between two or more ITS stations communicating over the global internet communication network. It is assumed that the reader is familiar with IETF specifications... | |
| ISO 19084:2015 specifies the definition of chromatic displacement for digital still cameras, test patterns, measurement conditions and methods, so as to enable the comparison of the results of measurement. The... | |
| ISO 19085-1:2017 gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common... | |
| ISO 19085-2:2017 gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which... | |
| ISO 19085-3:2017 gives the safety requirements and measures for numerically controlled (NC) boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.1), hereinafter referred to as... | |
| ISO 19085-4:2018 gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as "machines". NOTE 1 In manual loading, the operator... | |
| ISO 19085-5:2017 gives the safety requirements and measures for stationary and displaceable dimension saws, hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to... | |
| ISO 19085-6:2017 gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as "machines", designed to cut wood and materials with... | |
| ISO 19085-8:2017 gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the... | |
| ISO 19090:2018 specifies the test method to be followed for measuring and documenting the cell migration ability of porous bioactive ceramic materials. ISO 19090:2018 is not applicable to porous materials... | |
| ISO 19092:2008 describes the security framework for using biometrics for authentication of individuals in financial services. It introduces the types of biometric technologies and addresses issues concerning their application. ISO... | |
| ISO 19095-2:2015 specifies the test specimens for the evaluation of the adhesion interface performance in plastic-metal assemblies. | |
| ISO 19095-3:2015 specifies the test methods for the adhesion interface performance in plastic-metal assemblies. | |
| ISO 19095-4:2015 specifies the environmental conditions to evaluate the durability for the adhesion interface performance in plastic-metal assemblies. | |
| ISO 19095:2015 specifies the evaluation methods for the adhesion interface performance in plastic-metal assemblies. | |
| ISO 19097-1:2018 specifies accelerated life test method of mixed metal oxide anodes for impressed current cathodic protection used in concrete. The accelerated life test results can be used to compare... | |
| ISO 19097-2:2018 specifies accelerated life test method of mixed metal oxide anodes for impressed current cathodic protection used in soil or natural waters. The accelerated life test results can be... | |
| ISO 19101-1:2014 defines the reference model for standardization in the field of geographic information. This reference model describes the notion of interoperability and sets forth the fundamentals by which this... | |
| ISO 19103:2015 provides rules and guidelines for the use of a conceptual schema language within the context of geographic information. The chosen conceptual schema language is the Unified Modeling Language... | |
| ISO 19104:2016 specifies requirements for the collection, management and publication of terminology in the field of geographic information. The scope of this document includes - selection of concepts, harmonization of... | |
| ISO 19106:2004 is intended to define the concept of a profile of the ISO geographic information standards developed by ISO/TC 211 and to provide guidance for the creation of such... | |
| ISO 19107:2003 specifies conceptual schemas for describing the spatial characteristics of geographic features, and a set of spatial operations consistent with these schemas. It treats vector geometry and topology up... | |
| ISO 19108:2002 defines concepts for describing temporal characteristics of geographic information. It depends upon existing information technology standards for the interchange of temporal information. It provides a basis for defining... | |
| ISO 19109:2015 defines rules for creating and documenting application schemas, including principles for the definition of features. The scope of this International Standard includes the following: - conceptual modelling of... | |
| ISO 19110:2016 defines the methodology for cataloguing feature types. This document specifies how feature types can be organized into a feature catalogue and presented to the users of a set... | |
| ISO 19111-2:2009 specifies the conceptual schema for the description of spatial referencing using parametric values or functions. It applies the schema of ISO 19111 to combine a position referenced by... | |
| ISO 19111:2007 defines the conceptual schema for the description of spatial referencing by coordinates, optionally extended to spatio-temporal referencing. It describes the minimum data required to define one-, two- and... | |
| ISO 19112:2003 defines the conceptual schema for spatial references based on geographic identifiers. It establishes a general model for spatial referencing using geographic identifiers, defines the components of a spatial... | |
| ISO 19115-1:2014 defines the schema required for describing geographic information and services by means of metadata. It provides information about the identification, the extent, the quality, the spatial and temporal... | |
| ISO 19115-2:2009 extends the existing geographic metadata standard by defining the schema required for describing imagery and gridded data. It provides information about the properties of the measuring equipment used... | |
| ISO 19116:2004 specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) so that the position-using device(s) can obtain and unambiguously interpret... | |
| ISO 19117:2012 specifies a conceptual schema for describing symbols, portrayal functions that map geospatial features to symbols, and the collection of symbols and portrayal functions into portrayal catalogues. This conceptual... | |
| ISO 19118:2011 specifies the requirements for defining encoding rules for use for the interchange of data that conform to the geographic information in the set of International Standards known as... | |
| ISO 19119:2016 defines requirements for how platform neutral and platform specific specification of services shall be created, in order to allow for one service to be specified independently of one... | |
| ISO 19123:2005 defines a conceptual schema for the spatial characteristics of coverages. Coverages support mapping from a spatial, temporal or spatiotemporal domain to feature attribute values where feature attribute types... | |
| ISO 19125-1:2004 establishes a common architecture for geographic information and defines terms to use within the architecture. It also standardizes names and geometric definitions for Types for Geometry. ISO 19125-1:2004... | |
| ISO 19126:2009 specifies a schema for feature concept dictionaries to be established and managed as registers. It does not specify schemas for feature catalogues or for the management of feature... | |
| ISO 19128:2005 specifies the behaviour of a service that produces spatially referenced maps dynamically from geographic information. It specifies operations to retrieve a description of the maps offered by a... | |
| ISO 19131:2007 specifies requirements for the specification of geographic data products, based upon the concepts of other ISO 19100 International Standards. It also provides help in the creation of data... | |
| ISO 19132:2007 defines a reference model and a conceptual framework for location-based services (LBS), and describes the basic principles by which LBS applications may interoperate. This framework references or contains... | |
| ISO 19133:2005 describes the data types, and operations associated with those types, for the implementation of tracking and navigation services. It is designed to specify web services that can be... | |
| ISO 19134:2006 specifies the data types and their associated operations for the implementation of multimodal location-based services for routing and navigation. It is designed to specify web services that may... | |
| ISO 19135-1:2015 specifies procedures to be followed in establishing, maintaining, and publishing registers of unique, unambiguous, and permanent identifiers and meanings that are assigned to items of geographic information. In... | |
| ISO 19137:2007 defines a core profile of the spatial schema specified in ISO 19107 that specifies, in accordance with ISO 19106, a minimal set of geometric elements necessary for the... | |
| ISO 19141:2008 defines a method to describe the geometry of a feature that moves as a rigid body. Such movement has the following characteristics. The feature moves within any domain... | |
| ISO 19142:2010 specifies the behaviour of a web feature service that provides transactions on and access to geographic features in a manner independent of the underlying data store. It specifies... | |
| ISO 19143:2010 describes an XML and KVP encoding of a system neutral syntax for expressing projections, selection and sorting clauses collectively called a query expression. These components are modular and... | |
| ISO 19144-1:2009 establishes the structure of a geographic information classification system, together with the mechanism for defining and registering the classifiers for such a system. It specifies the use of... | |
| ISO 19144-2:2012 specifies a Land Cover Meta Language (LCML) expressed as a UML metamodel that allows different land cover classification systems to be described based on the physiognomic aspects. ISO... | |
| ISO 19145:2013 specifies the process for establishing, maintaining and publishing registers of representation of geographic point location in compliance with ISO 19135. It identifies and describes the information elements and... | |
| ISO 19147:2015 specifies the data types and code lists associated with those types for the implementation of transfer nodes and their services in transport modelling and location based services. It... | |
| ISO 19148:2012 specifies a conceptual schema for locations relative to a one-dimensional object as measurement along (and optionally offset from) that object. It defines a description of the data and... | |
| ISO 19149:2011 defines an XML-based vocabulary or language to express rights for geographic information in order that digital licenses can be created for such information and related services. This language,... | |
| ISO 19150-2:2015 defines rules and guidelines for the development of ontologies to support better the interoperability of geographic information over the Semantic Web. The Web Ontology Language (OWL) is the... | |
| ISO 19152:2012: defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration (including those over water and land, and elements above and below the surface... | |
| ISO 19153:2014 is a reference model for digital rights management (DRM) functionality for geospatial resources (GeoDRM). As such, it is connected to the general DRM market in that geospatial resources... | |
| ISO 19154:2014 defines a reference model for ubiquitous public access (UPA) to geographic information. This reference model uses standard concepts from both the Open distributed processing ? Reference model (RM-ODP)... | |
| ISO 19155-2:2017 defines the following three mechanisms for linking Place Identifiers (PIs) (see ISO 19155) to features or objects existing in other encodings: - Id attribute of a GML object... | |
| ISO 19156:2011 defines a conceptual schema for observations, and for features involved in sampling when making observations. These provide models for the exchange of information describing observation acts and their... | |
| ISO 19157:2013 establishes the principles for describing the quality of geographic data. It ? defines components for describing data quality; ? specifies components and content structure of a register for... | |
| ISO 19160-1:2015 defines a conceptual model for address information (address model), together with the terms and definitions that describe the concepts in the model. Lifecycle, metadata, and address aliases are... | |
| ISO 19160-4:2017 defines key terms for postal addressing, postal address components and constraints on their use. Specifically, ISO 19160-4:2017 defines postal address components organized into three hierarchical levels: - elements,... | |
| ISO 19162:2015 defines the structure and content of a text string implementation of the abstract model for coordinate reference systems described in ISO 19111:2007 and ISO 19111-2:2009. The string defines... | |
| ISO 19165-1:2018 defines a preservation metadata extension of ISO 19115‑1. ISO 19165-1:2018 defines the requirements for the long-term preservation of digital geospatial data. These data also include metadata, representation information,... | |
| ISO 1920-10:2010 specifies a test method for the determination of the static modulus of elasticity in compression of hardened concrete, on test specimens which are cast or taken from a... | |
| ISO 1920-11:2013 specifies a method for determining the unidirectional non-steady-state chloride penetration parameters of conditioned specimens of hardened concrete. The test method enables the determination of the chloride penetration at... | |
| ISO 1920-1:2004 specifies procedures for the sampling of fresh concrete. The samples are used for the testing of properties of fresh concrete, or for making test specimens to determine the... | |
| ISO 1920-2:2016 specifies procedures for testing fresh concrete. It specifies the following test methods: determination of consistence (slump test, Vebe test, degree of compactability, flow-table test for high‑fluidity concrete, and... | |
| ISO 1920-3:2004 specifies the shape and dimensions of concrete test specimens for strength tests and the methods of making and curing these test specimens. | |
| ISO 1920-4:2005 specifies procedures for testing the strength of hardened concrete. | |
| ISO 1920-6:2004 specifies a method for taking cores from hardened concrete, their examination, preparation for testing and determination of compressive strength. ISO 1920-6:2004 does not give guidance on the decision... | |
| ISO 1920-7:2004 specifies non-destructive test methods for use on hardened concrete. The methods included are: a) determination of rebound number; b) determination of ultrasonic pulse velocity; and c) determination of... | |
| ISO 1920-8:2009 specifies a method for determining the length changes of concrete specimens due to drying in air, and the method of preparing and curing the concrete specimens to be... | |
| ISO 1920-9:2009 specifies a method for determining the creep of standard concrete test cylinders subjected to a sustained longitudinal compressive load. | |
| ISO 19202-1:2017 specifies the safety requirements for planning of track, design and calculation, manufacturing, erection, testing and commissioning of summer toboggan runs and their components according to Clause 3. Those... | |
| ISO 19202-2:2017 specifies operational requirements, signage, maintenance, repair and modifications for summer toboggan runs and their components according to ISO 19202‑1. ISO 19202-2:2017 is applicable to summer toboggan runs and... | |
| ISO 19204:2017 describes in a general way the application of the soil quality TRIAD approach for the site-specific ecological risk assessment of contaminated soils. In detail, it presents in a... | |
| ISO 19207:2016 specifies the classification method of adhesive strength for thermal spray coatings at room temperature by using Vickers hardness testing machine. It classifies the adhesive strength, called adhesion index,... | |
| ISO 19208:2016 provides the framework for specifying the performance of a building as a whole or a part thereof in order to satisfy specified user requirements and societal expectations. ISO... | |
| ISO 19209:2017 classifies thermoplastic resin-based wood adhesives for non-structural applications into durability classes D1 to D4 based on the dry and wet strengths of bond lines measured under specified conditions... | |
| ISO 19210:2017 specifies tests for adhesives for wood and derived timber products for the assessment of their resistance to hot and cold water. It can be used for the assessment... | |
| ISO 19212:2006 specifies methods for determining the temperature dependence of the shear strength of the adhesive or adhesive bond in adhesively bonded products. | |
| ISO 19213:2017 specifies mechanical test methods for characterizing cortical bone model materials for use as a standard model for performing mechanical tests for devices or instruments used in orthopaedic surgery,... | |
| ISO 19214:2017 prescribes a method for the determination of apparent growth direction by transmission electron microscopy. It is applicable to all kinds of wirelike crystalline materials fabricated by various methods. | |
| ISO 19220:2004 specifies the requirements for solid-wall styrene copolymer blend (SAN + PVC) pipes and fittings for soil and waste discharge (low and high temperature) above ground inside buildings, as... | |
| ISO 19224:2017 deals with safety requirements for continuous surface miners (CSM). It specifies common requirements for the design and construction of CSM to protect workers from accidents and health hazards... | |
| ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and... | |
| ISO 19226:2017 provides a procedure for the evaluation of irradiation data in the region between the reactor core and the inside surface of the containment vessel, through the pressure vessel... | |
| ISO 19227:2018 specifies requirements for the cleanliness of orthopaedic implants, hereafter referred to as implants, and test methods for the cleaning process validation and controls, which are based on a... | |
| ISO 19229:2015 sets requirements for the purity analysis of materials used in the preparation of calibration gas mixtures and the use of these data in calculating the composition of the... | |
| ISO 19232-1:2013 specifies a device and a method for the determination of the image quality of radiographs using wire-type image quality indicators. | |
| ISO 19232-2:2013 specifies a device and a method for the determination of the image quality of radiographs using step/hole-type image quality indicators. | |
| ISO 19232-3:2013 specifies the minimum image quality values to ensure a uniform radiographic quality. It applies to the two types of image quality indicator as detailed in ISO 19232-1 for... | |
| ISO 19232-4:2013 gives instructions for the determination of image quality values and image quality tables. If the IQI requirements specified in ISO 19232‑3 cannot be used because, for example, the... | |
| ISO 19233-1:2017 provides requirements for capturing necessary bone geometries, when using a medical X-ray computed tomography apparatus, to provide the information for applications such as preoperative planning, surgical navigation, robotic... | |
| ISO 19235:2015 specifies the basic parameters, requirements, and testing methods of timing accuracy for analogue quartz clocks, hereinafter referred to as "the quartz clock". This International Standard applies to analogue... | |
| ISO 19237:2017 specifies the concept of operation, minimum functionality, system requirements, system interfaces, and test procedures for Pedestrian Detection and Collision Mitigation Systems (PDCMS). It specifies the behaviours that are... | |
| ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories. ISO 19238:2014 addresses a) the confidentiality... | |
| ISO 1924-2:2008 specifies a method for measuring the tensile strength, strain at break and tensile energy absorption of paper and board, using a testing machine operating at a constant rate... | |
| ISO 1924-3:2005 specifies a method for measuring the tensile strength, strain at break, tensile energy absorption and tensile stiffness, using a testing machine operating with a constant rate of elongation... | |
| ISO 19240:2017 specifies requirements for design, dimensions, material, fabrication and production testing of lined metal quarter turns valves (plug valves, butterfly valves, ball valves) and check valves with flanged, wafer... | |
| ISO 19242:2015 specifies a method for the determination of the total sulfur content of raw rubber and unvulcanized or vulcanized rubber compounds by ion chromatography following the preparation of a... | |
| ISO 19246:2016 specifies a general method for determining the liquid absorption capacity of a pigment and extender by using di-(2-ethylhexyl) adipate (DOA, CAS 103-23-1). The determination of the DOA absorption... | |
| ISO 19250:2010 specifies a method for the detection of Salmonella spp. (presumptive or confirmed) in water samples. It is possible that, for epidemiological purposes or during outbreak investigations, other media... | |
| ISO 19252:2008 specifies a method for determining the scratch properties of plastics under defined conditions. The method involves making a scratch by moving a hard instrument (scratch tip) of specified... | |
| ISO 19259:2015 specifies a bearing with embedded solid lubricants which has been widely used as a solid lubricant bearing. | |
| ISO 19262:2015 defines terms used in the area of imaging system capability qualification for archival recording and approval. Only terms related to this area are included. These terms are relevant... | |
| ISO 1926:2009 specifies a method of determining the behaviour of rigid cellular plastics materials when they are subjected to a tensile stress. It applies primarily to cellular materials having a... | |
| ISO 1927-1:2012 defines terms relating to monolithic (unshaped) refractory products and establishes a classification for the various types of product. Raw materials and crushed or granulated refractory materials, which do... | |
| ISO 1927-2:2012 gives guidance on the sampling of monolithic (unshaped) refractory materials for the purpose of inspection and testing for quality and general information on the reduction and treatment of... | |
| ISO 1927-3:2012 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to... | |
| ISO 1927-4:2012 describes methods for the determination and measurement of the consistency of dense and insulating castables as defined in ISO 1927-1:2012. It is applicable to all types of dense... | |
| ISO 1927-5:2012 specifies methods for the preparation and treatment (curing, drying and firing) of test pieces from monolithic (unshaped) refractory materials. The methods are applicable to dense and insulating castables... | |
| ISO 1927-6:2012 specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to ISO 1927-5:2012. The methods are applicable to dense and insulating... | |
| ISO 1927-7:2012 specifies methods for the testing of as-delivered pre-formed shapes. It applies to shapes fabricated from dense and insulating castables and ramming materials as defined in ISO 1927-1. | |
| ISO 1927-8:2012 specifies methods for the determination of the properties of unshaped refractory materials from test pieces prepared and stored in accordance with ISO 1927-5. The methods complement those described... | |
| ISO 19272:2015 specifies a glow discharge optical emission spectrometric (GD-OES) method for determination of the mass fraction Carbon, Silicon, Manganese, Phosphorus, Sulfur, Chromium, Nickel, Aluminium, Titanium and Copper in low... | |
| ISO 19280:2017 specifies a methodology for ranking the crevice corrosion resistance of stainless steels and related alloys when exposed to oxidizing chloride solution. This document allows the measurement of critical... | |
| ISO 19281:2016 the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) for carriage on aircraft main deck, to be used on either of the... | |
| ISO 19285:2017 specifies acceptance levels for the phased array ultrasonic testing technique (PAUT) of full penetration welds in ferritic steels of minimum thickness of 6 mm which correspond to the... | |
| ISO 19288:2016 specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. The classification is based on their chemical... | |
| ISO 19289:2015 indicates exposure rules for various sensors, but what should be done when these conditions are not fulfilled? There are sites that do not respect the recommended exposure rules. | |
| ISO 1928:2009 specifies a method for the determination of the gross calorific value of a solid mineral fuel at constant volume and at the reference temperature of 25 °C in... | |
| ISO 19290:2016 specifies a method for the quantification of four tobacco specific nitrosamines (TSNAs) in the total particulate matter of mainstream cigarette smoke by using reversed phase high performance liquid... | |
| ISO 19291:2016 describes test methods based on a high-frequency, linear-oscillation test machine to determine tribological quantities like friction, wear, load carrying capacity and extreme pressure behaviour of liquid lubricants (oils)... | |
| ISO 19292:2014 specifies requirements, test methods, and performance criteria for point-type, resettable flame detectors that operate using radiation from a flame, for use in fire detection systems installed on ships. | |
| ISO 19318:2004 specifies the minimum amount of information describing the methods of charge control and charge correction in measurements of core-level binding energies for insulating specimens by X-ray photoelectron spectroscopy... | |
| ISO 19322:2018 specifies the characteristics for resilient floor coverings based upon thermoplastic polymers, supplied either in roll, plank or tile form. To encourage the consumer to make an informed choice,... | |
| ISO 19332:2007 specifies certain characteristics of the oil of blue chamomile [Chamomilla recutita (L.) Rauschert syn. Matricaria chamomilla auct.], in order to facilitate assessment of its quality. | |
| ISO 19334:2010 specifies a gas-chromatographic method for determining the amounts of certain rosin acids in gum rosin using capillary gas-chromatographic separation of the volatile methyl esters of these acids. It... | |
| ISO 19338:2014 provides performance and assessment requirements for design standards of structural concrete. It can be used for international harmonization of design and construction requirements. ISO 19338:2014 includes requirements, which... | |
| ISO 19340:2017 specifies a method for the determination of dissolved perchlorate in water (e.g. drinking water, mineral water, raw water, surface water, partially treated water or swimming pool water, waste... | |
| ISO 19343:2017 specifies a high performance liquid chromatography (HPLC) method to analyse histamine in fish and fishery products (fish sauces, fish maturated by enzyme in brine, etc.) intended for human... | |
| ISO 19344:2015 specifies a standardized method for the quantification of active and/or total lactic acid bacteria and probiotic strains in starter cultures used in dairy products by means of flow... | |
| ISO 19347:2015 specifies the principal characteristics of synchronous endless belts and pulleys for use in synchronous endless belt drives[1] for mechanical power transmission and where positive indexing or synchronization is... | |
| ISO 19353:2015 specifies methods for identifying fire hazards resulting from machinery and for performing a risk assessment. It gives the basic concepts and methodology of protective measures for fire prevention... | |
| ISO 19354:2016 specifies the general requirements for marine cranes of metal construction. It is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling... | |
| ISO 19355:2016 specifies the structural requirements for marine cranes of metal construction. ISO 19355:2016 is applicable to the following types of marine cranes: - deck cranes mounted on ships for... | |
| ISO 19356:2016 describes the required tests and the testing procedures for marine cranes of metal construction. ISO 19356:2016 is applicable to the following types of marine cranes: - deck cranes... | |
| ISO 19357:2016 specifies the requirements for design, construction, safety, performance, acceptance test and operation of marine cranes for low temperature operation. ISO 19357:2016 is applicable to marine cranes of the... | |
| ISO 19361:2017 applies to liquid scintillation counters and requires the preparation of a scintillation source obtained by mixing the test sample and a scintillation cocktail. The test sample can be... | |
| ISO 19364:2016 specifies a method for comparing computer simulation results from a vehicle mathematical model to measured test data for an existing vehicle according to steady-state circular driving tests as... | |
| ISO 19365:2016 specifies a method for comparing computer simulation results from a vehicle mathematical model to test data measured for an existing vehicle undergoing sine with dwell tests that are... | |
| ISO 19372:2015 covers the safety requirements for industrial, commercial, and residential automated stationary microturbine (micro gas turbine) engine generator assemblies with an individual system or subsystem output rating with nominal... | |
| ISO 19377:2017 describes test methods for determining the deviation of the path travelled by a vehicle during a braking manoeuvre induced by an emergency braking system from a pre-defined desired... | |
| ISO 19378:2003 provides the manufacturers and users of machine tools with criteria for the choice among the various categories of lubricants and gives specifications for these lubricants. ISO 19378:2003 facilitates... | |
| ISO 19379:2003 contains the requirements and test methods for the production of an ECS Database. It addresses the elements of the database relevant to safety of navigation including content, quality... | |
| ISO 1938-1:2015 specifies the most important metrological and design characteristics of plain limit gauges of linear size. ISO 1938-1:2015 defines the different types of plain limit gauges used to verify... | |
| ISO 1938-2:2017 specifies the most important metrological and design characteristics of reference disk gauges. ISO 1938-2:2017 covers linear sizes of the gauge up to 500 mm. | |
| ISO 19385 specifies requirements for nine classes of reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 25. Each class has a single maximum working pressure. | |
| ISO 19389:2014 specifies a standard message format for use in exchanging spacecraft conjunction information between originators of Conjunction Assessments (CAs) and satellite owner/operators and other authorized parties. Such exchanges are... | |
| ISO 19396-1:2017 specifies a method for laboratory measurement of the pH value of polymer dispersions and coating materials using pH electrodes with a glass membrane. ISO 19396‑2 specifies a method... | |
| ISO 19396-2:2017 specifies a method for measuring the pH value of dispersions and coating materials using pH electrodes with ion-sensitive field-effect transistor (ISFET) technology. ISO 19396‑1 specifies a method for... | |
| ISO 19399:2016 specifies a destructive method for determination of the dry film thickness, in which damage to the coat caused in a definite manner is evaluated microscopically. The method is... | |
| ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the... | |
| ISO 19403-3:2017 specifies a test method to measure the surface tension of liquids with an optical method using the pendant drop. The method can be applied for the characterization of... | |
| ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization... | |
| ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined. By means of this defined measurement, the... | |
| ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles... | |
| ISO 19429:2015 provides a system for designating the location of an implant body within a jaw, and is intended for use with the scheme described in ISO 3950. It does... | |
| ISO 1942:2008 provides definitions for a number of concepts specific to dentistry in the interest of facilitating development and comprehension of standards, and to improve communication with the Fédération Dentaire... | |
| ISO 19430:2016 describes the evaluation of the number?based particle size distribution in liquid dispersions (solid, liquid or gaseous particles suspended in liquids) using the particle tracking analysis method for diffusion... | |
| ISO 19432:2012 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine driven, cut-off machines, intended to be used by a... | |
| ISO 19433:2008 provides a terminology and sets out the commercial specifications for pedestrian‑controlle d vibratory plates used in building construction. It is applicable to both forward- and reversible-type plates. These... | |
| ISO 19434:2017 establishes a classification of mine accidents by their origin or causes, by the type of accident, and by their results or consequences. The latter includes only the accidents... | |
| ISO 19438:2003 specifies a multi-pass filtration test, with continuous contaminant injection and using the on-line particle counting method, for evaluating the performance of fuel filters for internal combustion engines submitted... | |
| ISO 19439:2006 specifies a framework conforming to requirements of ISO 15704, which serves as a common basis to identify and coordinate standards development for modelling of enterprises, emphasising, but not... | |
| ISO 19440:2007 specifies the characteristics of the core constructs necessary for computer-supported modelling of enterprises conforming to ISO 19439. ISO 19440:2007 focuses on, but is not restricted to, the computer... | |
| Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire... | |
| Specification of the characteristics and the choice of the measuring equipment and procedure for determination of the linear dimensions of sheets, blocks or test specimens of ceelular material (flexible and... | |
| Specifies the standard atmosphere for conditioning and testing pulp, paper, and board, and also the procedures for measuring the temperature and relative humidity. For the conditioning of laboratory prepared handsheets... | |
| The determination method applies to plasticized cellulose acetate in any form, such as moulding material, sheet, manufactured articles. Conversion of the plastizised sample to a film, prepared by dissolving and... | |
| The Geography Markup Language (GML) is an XML encoding in compliance with ISO 19118 for the transport and storage of geographic information modelled in accordance with the conceptual modelling framework... | |
| The ISO 19403 series specifies optical test methods - for the measurement of the contact angle, - for the determination of the free surface energy of a solid surface, including... | |
| This document gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as ""machines"". | |
| This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of... | |
| This document specifies the design loads and the design procedures for the structural design of headframe structures of mine shafts and their components for permanent and sinking operations. The headframe... | |
| This document specifies the design loads and the design procedures for the structural design of stages and components of stages. The loads specified in this document are not applicable for... | |
| This document specifies the loads, the load combinations and the design procedures for the design of shaft system structures in both vertical and decline shafts. The shaft system structures covered... | |
| This document specifies the loads, the load combinations and the design procedures for the design of the steel and aluminium alloy structural members of conveyances used for the transport of... | |
| This document specifies the terms and definitions related to the structures for mine shafts, used throughout ISO 19426. Terms used in mining can vary from conventional engineering usage, and they... | |
| This Iinternational Standard specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046:1978), for testing to determine... | |
| This International Standard specifies a method for the determination in crude fats or oils of visible matter which can be separated by gravity. | |
| This procedure specified in ISO 1920-12:2015 is a method for evaluating the carbonation resistance of concrete using an accelerated carbonation test. After a period of preconditioning, the test is carried... |
| << Prev | Next >> |