CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A single conventional value is specified and it is stated how the indication of hydrometer having a thermal cubic expansion coefficient value may be corrected for use in measurement tables... | |
| A system of color coding is specified for one-mark pipettes for identification of nominal capacities, and for graduated pipettes for identification of nominal capacities and unit of subdivision. The color... | |
| Applies to sampling from containers of all sizes. First are given definitions of relevant terms, followed by a description of apparatus, general information, sampling from containers, packaging, labelling and dispatch... | |
| Defines terms necessary for the design and construction of buildings in accordance with the principles and rules of modular coordination laid down in ISO 2848 and for the design and... | |
| Delta Differential One-Way Ranging (Delta-DOR) operations are applicable to space agencies that operate deep space missions that require accurate determination of the spacecraft position in the plane of the sky. | |
| Describes the principle, the reagents, the apparatus, the procedure, the expression of results and the contents of the test report. | |
| Description for the successful keeping, with or without the aid of artificial cooling, of ananas. | |
| Gives a method for the determination of the chloride content of meat and meat products, including poultry, with sodium chloride contents equal to or greater than 1,0 % (m/m). | |
| Gives an illustrated nomenclature of different types of formers for yarn packages as follows: cylindrical tubes or bobbins; tapered tubes; combined tubes. - Replaces ISO Recommendation R 1809-1970. | |
| Includes basic definitions, measurement requirements, specifications and recommendations for OCR paper and print, and deals with three main parameters for OCR media: optical properties of paper; optical properties and dimensions... | |
| Intended primarily as a simple and rapid quality-control test during the manufacture and conversion of PVC compounds. Suitable for coloured compounds. Is not recommended for compounds in the form of... | |
| ISO 17634:2015 specifies requirements for classification of tubular cored electrodes used in the post-weld heat-treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. | |
| ISO 17635:2016 gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness,... | |
| ISO 17636-1:2013 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques. ISO 17636-1:2013 applies to the joints of plates and pipes. Besides... | |
| ISO 17636-2:2013 specifies fundamental techniques of digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and... | |
| ISO 17637:2016 specifies the visual testing of fusion welds in metallic materials. It may also be applied to visual testing of the joint prior to welding. | |
| ISO 17638:2016 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for... | |
| ISO 17639:2003 gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination. | |
| ISO 17640:2017 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness ≥8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at... | |
| ISO 17641-1:2004 gives an introduction to the fundamentals of hot cracking in weld metals and parent alloys, and briefly describes the tests available for arc welding processes. | |
| ISO 17641-2:2015 specifies the required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: - T-joint... | |
| ISO 17642-1:2004 describes the fundamentals of cold crack formation and the principles of cold cracking tests. These tests can be used to determine the cold cracking sensitivity of welding consumables,... | |
| ISO 17642-2:2005 specifies the sizes of the test pieces, the specimens and the procedures for carrying out self-restraint cold cracking tests by: CTS (controlled thermal severity) test Tekken (Y-groove) or... | |
| ISO 17642-3:2005 specifies the sizes of the backing plates, specimens and procedures for carrying out externally loaded cold cracking tests by implant testing in order to obtain information about the... | |
| ISO 17643:2015 defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, base material). Eddy current testing... | |
| ISO 17652-1:2003 specifies standardized conditions for an assessment of shop primers on the weldability of steel materials. It is intended to be used for assessment of shop primers by testing... | |
| ISO 17652-2:2003 describes tests for assessing the influence of shop primers on the weldability. The following tests are detailed. Rating test This screening test provides a method of assessing the... | |
| ISO 17652-3:2003 specifies a test method for determination of a shop primers influence on the maximum speed usable for thermal cutting. | |
| ISO 17652-4:2003 specifies rating of shop primers as regards their influence on emission of fumes and gases during welding. | |
| ISO 17657-1:2005 specifies equipment for the calibration of measuring systems of welding current and indicating weld time in resistance welding using single-phase alternating current of frequency 50 Hz or 60... | |
| ISO 17657-2:2005 specifies a welding current meter with a current sensing coil to measure the weld time and the r.m.s. value of the welding current during a certain interval using... | |
| ISO 17657-3:2005 specifies current sensing coils of the toroidal-coil type as a current sensor for welding current meters or a welding current measuring system used to monitor the welding current... | |
| ISO 17657-4:2005 specifies calibration systems and calibration procedures for welding current measuring systems, current sensors, welding current meters and monitoring devices with current sensor used for measuring welding current in... | |
| ISO 17657-5:2005 specifies a verification procedure for welding current meters and monitoring devices with current sensing coil, which are applied in measuring welding current in resistance welding using alternating current... | |
| ISO 17660-1:2006 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of load-bearing joints, in workshops or on site. It specifies requirements for materials, design and... | |
| ISO 17660-2:2006 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of non load-bearing welded joints, in workshops or on site. It specifies requirements for materials,... | |
| ISO 17662:2016 specifies requirements for calibration, verification and validation of equipment used for - control of process variables during fabrication, and - control of the properties of equipment used for... | |
| ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to... | |
| ISO 17664:2017 specifies requirements for the information to be provided by the medical device manufacturer for the processing of a medical device that requires cleaning followed by disinfection and/or sterilization... | |
| ISO 17665-1:2006 specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices. Moist heat sterilization processes covered by ISO 17665-1:2006 include but... | |
| ISO 17666:2016 defines, extending the requirements of ISO 14300‑1, the principles and requirements for integrated risk management on a space project. It explains what is needed to implement a project-integrated... | |
| ISO 17668:2016 specifies minimum thickness requirements for six classes of zinc diffusion layers applied to ferrous products by the sherardizing process for the purpose of protection against corrosion and wear. | |
| ISO 17672:2016 specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition, but not necessarily... | |
| ISO 17677-1:2009 establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding. | |
| ISO 17678 IDF 202:2010 specifies a reference method for the determination of milk fat purity using gas chromatographic analysis of triglycerides. Both vegetable fats and animal fats such as beef... | |
| ISO 17679:2016 establishes the service requirements of a wellness spa, the main supporting processes and the quality of service to be provided to the client. ISO 17679:2016 can be used... | |
| ISO 17680:2015 establishes the requirements for the provision of services in thalassotherapy centres using marine environment's beneficial effects with curative or preventive purposes, aiming at ensuring -Good quality services responding... | |
| ISO 17682:2013 specifies general guidelines for ship launching utilizing air bags, including the specification of the ship and facilities such as air bags, slipway, towing arrangements, the launching procedure, and... | |
| ISO 17683:2014 specifies the classification, dimension and appearance, performance, and test methods for ceramic weld backing. It also specifies marking, packaging, and storage. ISO 17683:2014 is applicable to designing, manufacturing,... | |
| ISO 17687:2007 supports the application of automated identification, monitoring and exchange of emergency response information regarding dangerous goods carried on board road transport vehicles. Such information may include the identification,... | |
| ISO 17689:2015 is applied for organizations developing ground support equipment and also for operators performing space activity. Interface control documents format defined here does not contain the descriptions regarding various... | |
| ISO 17690:2015 specifies methods for the determination of available free cyanide at pH 6 in various types of water (such as ground, drinking, surface, leachate, waste water, and metallurgical processing... | |
| ISO 17693:2004 specifies a test method to determine the lastability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use. | |
| ISO 17694:2016 specifies a test method for determining the flex resistance of uppers and linings irrespective of the material in order to assess the suitability for the end use. | |
| ISO 17695:2004 specifies a test method for determining deformability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use. | |
| ISO 17696:2004 specifies a test method for assessing the tear strength of uppers, linings and insocks or complete upper assemblies, irrespective of material, in order to assess suitability for end... | |
| ISO 17697:2016 specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17698:2016 specifies a test method for determining the delamination resistance of uppers made from coated material, in order to assess the suitability for the end use. | |
| ISO 17699:2003 specifies two test methods for assessing, respectively, the water vapour permeability and the water vapour absorption of uppers or complete upper assembly irrespective of the material, in order... | |
| ISO 17700:2004 specifies two test methods for assessing the degree of damage (marring) and transfer of a material's surface colour during mild dry or wet abrasion. The methods are applicable... | |
| ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to... | |
| ISO 17702:2003 specifies a test method for determining the resistance of footwear upper material to water penetration on flexing, in order to assess the suitability for the end use. | |
| ISO 17703:2003 specifies a test method for determining the effect of heat on the tensile strength of uppers or complete upper assemblies irrespective of the material, in order to assess... | |
| ISO 17704:2004 specifies a test method for determining the resistance of uppers, linings and insocks, irrespective of the material, to wet and dry abrasion, in order to assess the suitability... | |
| ISO 17705:2003 specifies a test method for determining the thermal conductivity of uppers, lining and insocks irrespective of the material, in order to assess the suitability for the end use. | |
| ISO 17706:2003 specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the... | |
| ISO 17707:2005 specifies a method for determining the flex resistance of outsoles. This method is intended to assess the effect of sole materials and surface patterns on cut growth. This... | |
| ISO 17709:2004 specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear, to carry out the test methods needed to determine... | |
| ISO 17712:2013 establishes uniform procedures for the classification, acceptance, and withdrawal of mechanical freight container seals. It provides a single source of information on mechanical seals which are acceptable for... | |
| ISO 17713-1:2007 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup anemometers and propeller anemometers. It also describes an acceptance test and unambiguous methods for... | |
| ISO 17714:2007 defines characteristics of a thermometer shield/screen. It also defines test methods to inter-compare the behaviour of different screen designs. Although screens are usually used for both air temperature... | |
| ISO 17715:2013 specifies the determination of the damage to starch using an amperometric method. It is applicable to all flour samples from industrial or laboratory milling of wheat (Triticum aestivum... | |
| ISO 17717:2017 specifies the minimum requirements and test methods for meteorological balloons made from natural rubber latex or natural rubber latex compounded with synthetic rubber emulsion. ISO 17717:2017 applies to... | |
| ISO 17718:2013 specifies the determination of rheological behaviour as a function of mixing and temperature increase. It is applicable to all wholemeal and flour samples from industrial or laboratory milling... | |
| ISO 17724:2003 defines terms relating to graphical symbols, principally symbols for public information and use on equipment and safety signs. It does not include terms related to graphical symbols for... | |
| ISO 17727:2012 describes the quality control sampling plans for the receipt and shipping of ready-to-use cylindrical stoppers (flush with cork mouth finish) in semi-worked or finished cork used for still... | |
| ISO 17730:2014 specifies requirements and their test methods for total digestible fluoride content in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces... | |
| ISO 17733:2015 specifies a procedure for determination of the time-weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid... | |
| ISO 17734-1:2013 gives general guidance for the sampling and analysis of airborne isocyanates in workplace air. When amines and aminoisocyanates are suspected to be emitted (e.g. from thermal degradation of... | |
| ISO 17734-2:2013 gives general guidance for the sampling and analysis of airborne amines and aminoisocyanates in workplace air. It is strongly recommended that the determination of amines and aminoisocyanates is... | |
| ISO 17735:2009 gives general guidance for the sampling and analysis of airborne organic isocyanates in workplace air. ISO 17735:2009 is appropriate for a wide range of organic compounds containing isocyanate... | |
| ISO 17736:2010 gives general guidelines for the sampling and analysis of airborne isocyanates in workplace air. ISO 17736:2010 is appropriate for organic compounds containing free isocyanate functional groups and is... | |
| ISO 17738-1:2017 outlines requirements for exterior insulation and finish systems (EIFS), used in combination with a drained air space as an exterior wall cladding system. It also outlines the requirements... | |
| ISO 17740-1:2015 defines terminology and commercial specifications for concrete placing systems which are stationary. ISO 17740-1:2015 is not applicable to concrete placing systems which are part of a mobile or... | |
| ISO 17741:2016 specifies the general technical rules for measurement, calculation and verification of energy savings in retrofits projects or new projects. | |
| ISO 17742:2015 provides a general approach for energy efficiency and energy savings calculations with indicator-based and measure-based methods for the geographical entities countries, regions, and cities. ISO 17742:2015 considers all... | |
| ISO 17743:2016 establishes a methodological framework that applies to the calculation and reporting of energy savings from existing (implemented) and prospective measures and actions which intend to save energy. This... | |
| ISO 17744:2004 describes procedures for determining the specific volume of plastics as a function of temperature and pressure in both the molten and solid states. The standard specifies the use... | |
| ISO 17745:2016 specifies the characteristics of steel wire ring net panel for retaining of unstable slopes controlling and preventing rockfalls and loose debris flow along roads, highways and railway, urban... | |
| ISO 17746:2016 specifies the characteristics of steel wire rope net panels and rolls for retaining of unstable slopes controlling and preventing rockfalls and loose debris flow along roads, highways and... | |
| ISO 17751-1:2016 specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using light microscopy (LM). ISO 17751-1:2016 is applicable... | |
| ISO 17751-2:2016 specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using scanning electron microscopy (SEM). ISO 17751-2:2016 is... | |
| ISO 17754:2014 specifies a test method to determine the torsional resistance to driving of screws in solid timber or glued laminated timber or other wood-based materials. The method is used... | |
| ISO 17757 provides safety requirements for autonomous machines and semi-autonomous machines used in earth-moving and mining operations, and their autonomous or semi-autonomous machine systems (ASAMS). It specifies safety criteria both... | |
| ISO 17761:2015 describes the fluxes of charged particles for near-Earth space on base of the PAMELA experiment data. This International Standard can be used to calculate fluxes of protons with... | |
| ISO 17769-1:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of... | |
| ISO 17769-2:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of... | |
| ISO 17770:2017 addresses CubeSats, CubeSat Deployer and related verification of assurance/quality terms and metrics. ISO 17770:2017 defines a unique class of picosatellite, the CubeSat. CubeSats are ideal as space development... | |
| ISO 17771:2002 specifies a method for determining the degree of wetting of the reinforcement in a sheet moulding compound (SMC). It is applicable to quality control by the user of... | |
| ISO 17772-1:2017 specifies requirements for indoor environmental parameters for thermal environment, indoor air quality, lighting and acoustics and specifies how to establish these parameters for building system design and energy... | |
| ISO 17775:2006 specifies the detail dimensions of the male connector interfaces, fitted to an aircraft, used for servicing of the potable water systems, the toilet-flush water systems, and the toilet... | |
| ISO 17776:2016 describes processes for managing major accident (MA) hazards during the design of offshore oil and gas production installations. It provides requirements and guidance on the development of strategies... | |
| ISO 17777:2016 prescribes requirements for the classification of covered electrodes for manual metal arc welding of copper and copper alloys. It includes those chemical compositions in which the copper content... | |
| ISO 17778:2015 specifies a method for determining the flow rate/pressure drop relationship of components for plastics piping systems when tested using air at 25 mbar. | |
| ISO 17780:2015 specifies a method for the determination of saturated aliphatic hydrocarbons from C10 to C56 of natural origin present in vegetable oils, and for detecting the presence of mineral... | |
| ISO 17781:2017 specifies quality control testing methods and test conditions for the characterization of microstructure in relation to relevant properties in ferritic/austenitic (duplex) stainless steel components supplied in the solution... | |
| ISO 17785-1:2016 specifies the procedure for testing the infiltration rate of hardened pervious concrete pavement specimens in the laboratory. It is not a method for measuring the permeability of pervious... | |
| ISO 17786:2015 specifies a procedure of test for high temperature (105 °C) evaporation residue in DME used as fuel by the mass analysis method. This procedure is applicable to determine... | |
| ISO 17792 IDF 180:2006 specifies methods for the enumeration of citrate-fermenting lactic acid bacteria using a colony-count technique at 25 °C. The methods are applicable to dairy starter cultures and... | |
| ISO 177:2016 specifies a method for the determination of the tendency of plasticizers to migrate from plastics in which they are contained into other materials or other plastics when they... | |
| ISO 17800:2017 provides the basis for common information exchange between control systems and end use devices found in single - and multi-family homes, commercial and institutional buildings, and industrial facilities... | |
| ISO 17804:2005 defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. ISO 17804:2005 specifies five grades of ausferritic spheroidal graphite cast iron by a classification based... | |
| ISO 17807:2013 defines a CCSDS Asynchronous Message Service (AMS) for mission data system communications. The service and its protocols implement an architectural concept under which the modules of mission systems,... | |
| ISO 17808:2014 presents recommendations regarding the usage of coding schemes described in references [1]-[2] in the various mission profiles that are encountered in space research, space operations, and Earth exploration. | |
| ISO 17810:2014 defines CDMA spread spectrum modulation schemes in terms of: a) the services provided to the users of this specification; b) spreading code formats; and c) the procedures performed... | |
| ISO 17812:2007 specifies the procedure for the determination of total magnesium, total calcium, total manganese, total iron and total copper by atomic absorption spectrometry or by plasma emission spectrometry. The... | |
| ISO 17824-1:2015 specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings,... | |
| ISO 17824:2009 provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, functional evaluation,... | |
| ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal... | |
| ISO 17827-2:2016 specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely,... | |
| ISO 17828:2015 defines a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all pourable solid biofuels with... | |
| ISO 17829:2015 specifies the methods for the determination of diameter and length of pellets. Concerning the pellet length methods for both determination of the proportion of oversized pellets and for... | |
| ISO 17830:2016 aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water. | |
| ISO 17831-1:2015 defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as... | |
| ISO 17831-2:2015 defines a method for determining the mechanical durability of briquettes. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a... | |
| ISO 17832:2018 specifies the definition and requirements of non-parallel steel wire and cords for tyre reinforcement. | |
| ISO 17834:2003 is applicable to sprayed metal coatings for protection against corrosion at temperatures up to 1 000 °C (1 273 K). For the protection of iron and steel by... | |
| ISO 17836:2017 specifies a test procedure to determine the deposition efficiency for thermal spraying. It provides a reliable comparison method between different spray processes and different feed stock. It is... | |
| ISO 17840-1:2015 defines the content and the layout of the rescue sheet providing necessary and useful information about a vehicle involved in an accident to support the rescue team extricating... | |
| ISO 17841:2015 describes the test methods for determining thermal fatigue property of fine ceramic substrates applied to power modules, electronic control unit and similar devices. | |
| ISO 17842-2:2015 specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings,... | |
| ISO 17842-3:2015 defines requirements for the necessary inspections, in accordance with ISO/IEC 17020, of amusement devices designed, manufactured, operated and used according to ISO 17842 1 and ISO 17842 2. | |
| ISO 17846:2004 specifies the format and symbols for wordless precautionary labels placed by manufacturers on their equipment and consumables used in arc welding, plasma arc cutting, and thermal/flame cutting processes. | |
| ISO 17850:2015 specifies a protocol to measure geometric distortion of a digital camera. It is applicable to the measurement of digital cameras including camera phones. | |
| ISO 17851:2016 provides a general description of the whole set of space environment components which affect spacecrafts in various outer space regions, and the physical and chemical processes causing material... | |
| ISO 17852:2006 specifies a method for the determination of mercury in drinking, surface, ground and rain water using atomic fluorescence spectrometry. It may be applied to industrial and municipal waste... | |
| ISO 17853:2011 specifies methods for sampling wear particles generated by joint replacement implants in humans and in joint simulators. It specifies the apparatus, reagents and test methods to isolate and... | |
| ISO 17854:2013 defines an efficient and comprehensive coding and modulation solution able to support a wide range of spectral efficiency values and data rates. The main target is given by... | |
| ISO 17855-1:2014 establishes a system of designation for polyethylene thermoplastic material, which may be used as the basis for specifications. ISO 17855-1:2014 is applicable to all polyethylene homopolymers and to... | |
| ISO 17855-2:2016 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for... | |
| ISO 17858:2007 specifies a method for the determination of dioxin-like tetra- to hepta-chlorinated biphenyls (PCBs) in waters and wastewaters (containing less than 1 % suspended solids) using high-resolution gas chromatography/high-... | |
| ISO 17859:2015 specifies the measurement method of piezoelectric strain at high electric field for high power piezoelectric devices. ISO 17859:2015 is intended to be used to determine the piezoelectric strain... | |
| ISO 17860:2014 specifies the testing method to determine the drying loss of granulated ceramic powders. The drying loss of granulated ceramic powders means the loss of mass that occurs from... | |
| ISO 17861:2014 specifies a measurement method of spectral transmittance of fine ceramics thin films under humid condition. It provides test methods that will easily and accurately evaluate changes in optical... | |
| ISO 17862:2014 specifies a method for determining the maximum count rate for an acceptable limit of divergence from linearity of the intensity scale in single ion counting time-of-flight (TOF) secondary... | |
| ISO 17864:2005 describes the procedure for determining the critical pitting temperature for stainless steels (austenitic, ferritic/austenitic, ferritic stainless steel) under potentiostatic control. The principal advantage of the test is the... | |
| ISO 17871:2015 in conjunction with ISO 10297:2014 and ISO 14246:2014 specifies design, type testing, marking and manufacturing tests, and examinations requirements for quick-release cylinder valves intended to be fitted to... | |
| ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is... | |
| ISO 17873:2004 specifies the applicable requirements concerning the design and use of ventilation systems in nuclear installations such as hot cells, nuclear fuel fabrication and examination laboratories, plutonium-handling facilities, reprocessing... | |
| ISO 17874-1:2010 describes requirements concerning devices for remote handling of radioactive materials. The classification of these devices (categories and different designs within a category) and the distribution in the different... | |
| ISO 17874-2:2004 specifies the criteria for the selection, installation and use of a mechanical master-slave manipulator, for remote handling of radiaoactive materials in a nuclear facility. ISO 17874-2:2004 deals only... | |
| ISO 17874-3:2011 specifies the main features of electrical master-slave manipulators intended to be used for nuclear applications. It outlines basic principles which relate to the design features of electrical master-slave... | |
| ISO 17874:2006 defines the main features of power manipulators for use in ionizing radiation fields. It outlines basic principles which relate to the design and testing of power manipulators for... | |
| ISO 17881-1:2016 specifies a test method for determining some brominated flame retardants in textiles by gas chromatography ? mass spectrometry (GC-MS). The method is applicable to all kinds of textile... | |
| ISO 17881-2:2016 specifies a test method for determining some phosphorous flame retardants in textiles by high performance liquid chromatography ? tandem mass spectrometry (HPLC-MS/MS). The method is applicable to all... | |
| ISO 17884:2004 applies to searchlights fitted to high-speed craft in accordance with the International Code of Safety for High-Speed Craft [HSC Code, IMO-Resolution MSC.36 (63) Chapter 13]. | |
| ISO 17885:2015 specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal pipes for the following: ? supply of... | |
| ISO 17892-1:2014 specifies a method of determining the water content of soils. It is applicable to the laboratory determination of the water (also known as moisture) content of a soil... | |
| ISO 17892-2:2014 specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. ISO 17892-2:2014... | |
| ISO 17892-3:2015 specifies methods for the determination of the particle density of soils. ISO 17892-3:2015 is applicable to the laboratory determination of the particle density of soil within the scope... | |
| ISO 17892-4.2016 specifies a method of determining the particle size distribution of soils. ISO 17892-4.2016 is applicable to the laboratory determination of the particle size distribution of a soil test... | |
| ISO 17892-5:2017 specifies methods for the determination of the compressibility characteristics of soils by incremental loading in an oedometer. ISO 17892-5:2017 is applicable to the laboratory determination of the compression... | |
| ISO 17892-6:2017 specifies a method of undrained strength index testing of both undisturbed and remoulded specimens of fine grained soils by the fall cone method. ISO 17892-6:2017 is applicable to... | |
| ISO 17892-7:2017 specifies a method for the unconfined compression test. ISO 17892-7:2017 is applicable to the determination of the unconfined compressive strength for a homogeneous specimen of undisturbed, re-compacted, remoulded... | |
| ISO 17892-8:2018 specifies a method for unconsolidated undrained triaxial compression tests. ISO 17892-8:2018 is applicable to the laboratory determination of undrained triaxial shear strength under compression loading within the scope... | |
| ISO 17892-9:2018 specifies a method for consolidated triaxial compression tests on water-saturated soils. ISO 17892-9:2018 is applicable to the laboratory determination of triaxial shear strength under compression loading within the... | |
| ISO 17893:2004 defines terms, and specifies a designation system and a classification system, for steel wire ropes. | |
| ISO 17894:2005 provides a set of mandatory principles, recommended criteria and associated guidance for the development and use of dependable marine programmable electronic systems for shipboard use. It applies to... | |
| ISO 17895:2005 specifies a gas-chromatographic method of quantitatively determining the volatile organic compound (VOC) content (i.e. the content of organic compounds with boiling points up to 250 °C) under standard... | |
| ISO 17899:2004 specifies requirements for marine electric window wipers. It covers the required features, performance, constructional materials and electrical equipment for wiper systems for sea-going vessels where bridge duty is... | |
| ISO 178:2010 specifies a method for determining the flexural properties of rigid and semi-rigid plastics under defined conditions. A standard test specimen is defined, but parameters are included for alternative... | |
| ISO 179-1:2010 specifies a method for determining the Charpy impact strength of plastics under defined conditions. A number of different types of specimen and test configurations are defined. Different test... | |
| ISO 17901-1:2015 specifies the terms related to optical characteristics of holograms, the method to measure their diffraction efficiency, and the angular and wavelength selectivity measurement methods. These measurement methods are... | |
| ISO 17901-2:2015 specifies the terms and measurement method concerning exposure characteristics (exposure characteristic curve, exposure at half-maximum, R-value, amplitude of refractive index modulation) for the hologram recorded by double-beam interference. | |
| ISO 17905:2015 specifies the requirements for installation, inspection and maintenance of container securing devices for ships (hereinafter referred to as "securing devices") to ensure their safe use. | |
| ISO 17907:2014 specifies the technical requirements and test methods for the equipment necessary for the ships intended to use single point mooring (hereinafter referred to as "SPM") arrangements, such as... | |
| ISO 17916:2016 specifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. ISO 17916:2016 applies to machinery using thermal... | |
| ISO 17918:2015 specifies procedures of on-site detection and evaluation in order to determine the effects of material deterioration such as material loss from the components and structures that are sensitive... | |
| ISO 17925:2004 specifies methods of determining the coating mass per unit area by gravimetry and chemical composition on one side-surface of zinc- and/or aluminium-based coatings on steel by means of... | |
| ISO 17932:2011 specifies a method for the determination of the deterioration of bleachability index (DOBI) of crude palm oil and the carotene content of crude or bleached palm oil and... | |
| ISO 17937:2015 specifies requirements and their test methods for osteotomes used in dentistry for bone compaction, internal sinus floor elevation, and jaw bone cleaving. It also specifies the requirements for... | |
| ISO 17939:2015 specifies the classification, structure and main dimensions, materials, quality of manufacture, testing of watertightness and designation for oil tank hatches for application on board ships in order to... | |
| ISO 1793:2005 specifies the dimensions and characteristics of 16 mm motion-picture film projection reels. | |
| ISO 17940:2015 specifies the classification, marking and requirements for packaging, storage and transportation of hinged watertight doors (hereinafter referred to as watertight doors). ISO 17940:2015 is applicable to the design,... | |
| ISO 17941:2015 specifies classification and designation, requirements, test method, marking, packaging, transport, and storage of hydraulic watertight hinged fireproof doors (hereinafter referred to as "watertight doors"). ISO 17941:2015 is applicable... | |
| ISO 17942:2014 specifies the methods for the chemical analysis of fine boron nitride powders used as the raw material for fine ceramics. It stipulates the analysis methods of total boron,... | |
| ISO 17943:2016 specifies a method for the determination of volatile organic compounds (see Table 1). This comprises, for example, halogenated hydrocarbons, trihalogenated methanes, gasoline components (such as BTEX, MTBE, and... | |
| ISO 17945:2015 establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water)... | |
| ISO 17947:2014 specifies the methods for the chemical analysis of fine silicon nitride powders used as the raw material for fine ceramics. It stipulates the determination methods of total silicon,... | |
| ISO 17949:2013 specifies the conditions and requirements for the recommended placement of the WorldSID 50th percentile male side-impact dummy (WS50), as defined in ISO 15830‑1, ISO 15830‑2, ISO 15830‑3, and... | |
| ISO 17957:2015 defines a method for measuring shading for digital cameras (including camera phones). The method includes procedures for measuring colour and luminance signal components separately. | |
| ISO 17959:2014 specifies the requirements and test methods of characteristics of solid wood flooring boards for internal (interior) use as flooring. It also specifies packaging and marking requirements. It is... | |
| ISO 1795:2017 specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical... | |
| ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds. It is applicable... | |
| ISO 17966:2016 specifies requirements and associated test methods for assistive products for personal hygiene (APPHs) that support users and which are intended by the manufacturer to alleviate or compensate for... | |
| ISO 17972-2:2016 defines an exchange format for target input values, colour and process control data relating to scanner targets (and the associated metadata necessary for its proper interpretation) in electronic... | |
| ISO 17972-3 defines an exchange format for target input values, colour and process control data relating output targets for printers of all types (and the associated metadata necessary for its... | |
| ISO 17972-4:2018 defines an exchange format for spectral measurement data of inks to provide a means to characterise spot colour inks to allow reliable printing and proofing of products that... | |
| ISO 17973:2016 specifies a method for calibrating the kinetic energy scales of Auger electron spectrometers with an uncertainty of 3 eV, for general analytical use in identifying elements at surfaces. | |
| ISO 17974:2002 specifies a method for calibrating the kinetic energy scales of Auger electron spectrometers used for elemental and chemical state analysis at surfaces. It also specifies a calibration schedule... | |
| ISO 1797:2017 specifies the requirements for dimensions and material properties of shanks used in dentistry for rotary or oscillating instruments. It describes the measurement methods for the verification of the... | |
| ISO 17987-1:2016 gives an overview of the structure and the partitioning of ISO 17987 (all parts). In addition, it outlines the use case where the ISO 17987 (all parts) will... | |
| ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication. | |
| ISO 17987-3:2016 specifies the LIN protocol including the signal management, frame transfer, schedule table handling, task behaviour and status management and LIN master and slave node. It contains also OSI... | |
| ISO 17987-4:2016 specifies the 12 V and 24 V electrical physical layers (EPL) of the LIN communications system. The electrical physical layer for LIN is designed for low-cost networks with... | |
| ISO 17987-6:2016 specifies the LIN protocol conformance test. This test verifies the conformance of LIN communication controllers with respect to ISO 17987‑2 and ISO 17987‑3. ISO 17987-6:2016 provides all necessary... | |
| ISO 17987-7:2016 specifies the conformance test for the electrical physical layer (EPL) of the LIN communications system. It is part of this document to define a test that considers ISO... | |
| ISO 17989-1:2015 provides guidelines to assist designers and manufacturers of tractors and machinery for agriculture and forestry to integrate sustainability principles, practices and considerations into their organizations and processes. This... | |
| ISO 1798:2008 specifies a method for determining the strength and deformation properties of flexible cellular materials when a test piece is extended at a constant rate until it breaks. | |
| ISO 17992:2013 specifies a hydride generation atomic absorption spectrometric method for the determination of the arsenic content of iron ore. ISO 17992:2013 is applicable to mass fractions of arsenic between... | |
| ISO 17993:2002 specifies a method using high performance liquid chromatography (HPLC) with fluorescence detection for the determination of 15 selected polycyclic aromatic hydrocarbons (PAH) [naphthalene, acenaphthene, phenanthrene, fluoranthene, benzo(a)anthracene, benzo(b)fluoranthene... | |
| ISO 17994:2014 specifies an evaluation procedure for comparing two methods with established performance characteristics according to ISO/TR 13843 and intended for the quantification of the same target group or species... | |
| ISO 17995:2005 specifies a method for the detection and semiquantitative enumeration of thermotolerant Campylobacter species. The method can be applied to all kinds of filterable waters. The method can also... | |
| ISO 18054:2004 specifies a method for the determination of irone content in essential oil of orris rhizome (Iris pallida Lam. or Iris germanica L.) using gas chromatography on a capillary... | |
| ISO 18055-1:2004 establishes a classification of photo-grade inkjet papers and films with regard to nomenclature, formats and thickness/grammage. It does not include non-photo-grade media, non-paper/film media, or media intended solely... | |
| ISO 18061:2014 specifies a test method for the determination of the antiviral activity of materials that contain photocatalytic materials or have photocatalytic films on the surface, by enumerating the destruction... | |
| ISO 18063-1:2016 applies to rough-terrain variable-reach trucks (hereinafter referred to as ?trucks') that have a specific seated operator's position on the left-hand side of the boom or centre position (excluding... | |
| ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic... | |
| ISO 18065:2015 establishes the requirements for tourist services provided directly by NPAA in order to satisfy visitors while giving priority to the NPA conservation objectives, excluding the marine protected areas. | |
| ISO 18066:2015 specifies a test method for the determination of the boiling water shrinkage of non-textured and textured multifilament yarns (made of polyester, polyamide, polypropylene, cellulose fibre, etc.) Only automatic... | |
| ISO 18067:2015 specifies methods for the determination of dry-hot air shrinkage (after treatment) of synthetic filament yarns, skein method and single-end method. The skein method provides two forms of measurement... | |
| ISO 18068:2014 specifies a test method to determine the total sugar content in cotton fibres. Spectrophotometry is used as a quantitative determination method, and 3,5-dihydroxytoluene -sulfuric acid solution is used... | |
| ISO 18069:2015 specifies the measurements of the corrosion rate of uniform corrosion for stainless steels and nickel based alloys in the intended liquids and the ability for the material to... | |
| ISO 1806:2002 specifies a method of determining the mesh-breaking force of netting for fishing. Tests may be carried out in both the dry and wet states, but tests in the... | |
| ISO 18070:2015 specifies a crevice forming technique and crevice former which are intended to be used for crevice corrosion testing of flat specimens or tubes of stainless steels, in corrosive... | |
| ISO 18071:2016 specifies the determination of the antiviral activity of materials that contain indoor-light-active photocatalytic materials or have indoor-light-active photocatalytic films on the surface by a test method that measures... | |
| ISO 18073:2004 specifies a method for the determination of tetra- to octa-chlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in waters and waste waters (containing less than 1 % by mass solids)... | |
| ISO 18074:2015 specifies a testing method for DNA analysis of some animal fibres to identify cashmere, wool, yak, and their blends by using extraction, amplification by the polymerase chain reaction... | |
| ISO 18075:2018 provides guidance for performing and validating the sequence of steady-state calculations leading to prediction, in all types of operating UO2-fuel commercial nuclear reactors, of: - reaction-rate... | |
| ISO 18077:2018 applies to the reactor physics tests that are performed following a refuelling or other core alteration of a PWR for which nuclear design calculations are required. This document... | |
| ISO 18080-1:2015 specifies a test method using corona charging with measurement of the impressed peak voltage and charge decay time on specimens of fabric or all types of composition and... | |
| ISO 18080-2:2015 specifies a test method using rotary mechanical friction with measurement of the friction-charged electrostatic potential on specimens of fabric. The test method is suitable for fabrics of all... | |
| ISO 18080-3:2015 specifies a test method using manual friction with measurement of frictional charge density on specimens of fabric. The test method is suitable for fabrics of all types of... | |
| ISO 18080-4:2015 specifies a test method using horizontal mechanical friction with measurement of friction-charged electrostatic potential on specimens of fabric and the time for that potential to decay. The test... | |
| ISO 18081:2016 specifies the general principles required for leak detection by acoustic emission testing (AT). It is addressed to the application of the methodology on structures and components, where a... | |
| ISO 18082:2014 specifies the dimensions, the allocation and marking of non-interchangeable screw-threaded (NIST) connectors intended to be used at operating pressures up to 1 400 kPa, and for vacuum systems... | |
| ISO 18084:2011 specifies the main dimensions, tolerances and characteristics of punches and dies for all kinds of tablets. ISO 18084:2011 deals with measures which are relevant for the interchangeability of... | |
| ISO 18086:2015 is applicable to buried cathodically-protect ed pipeline that is influenced by AC traction systems and/or AC power lines. In the presence of AC interference, the protection criteria given... | |
| ISO 18089:2015 describes the procedure for determining the critical crevice temperature (CCT) for stainless steels under potentiostatic control. The principal advantage of the test is the rapidity with which the... | |
| ISO 18095:2018 gives guidelines for the monitoring techniques to be considered when setting up a condition monitoring programme for power transformers and includes references to associated standards required in this... | |
| ISO 18096:2013 specifies the equipment and procedures for determining the maximum service temperature for preformed pipe insulation. It is applicable to thermal insulating products. | |
| ISO 18097:2013 specifies the equipment and procedures for determining the maximum service temperature of flat insulation products. It is applicable to thermal insulating products. | |
| ISO 18098:2013 specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. It is applicable to full-size thermal insulating products and... | |
| ISO 18099:2013 specifies the equipment and procedures for determining the coefficient of linear thermal expansion. It is applicable to thermal insulating products within the temperature range 196 °C to 850... | |
| ISO 18100:2017 specifies the product and performance requirements for finger-jointed structural timber made from sawn timber elements. ISO 18100:2017 does not cover products made using impressed (die-formed) joints or finger-jointed... | |
| ISO 18103:2015 defines the requirements of the "Super S" labelling code for finished woven fabric made from pure virgin wool and the test method to determine this. | |
| ISO 18104:2014 specifies the characteristics of two categorial structures, with the overall aim of supporting interoperability in the exchange of meaningful information between information systems in respect of nursing diagnoses... | |
| ISO 18106:2016 specifies the method for measuring relative snow grip performance index of a candidate tyre compared to a reference, under loaded conditions for new tyres intended to be used... | |
| ISO 18113-1:2009 defines concepts, establishes general principles and specifies essential requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) medical devices. | |
| ISO 18113-2:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents for professional use. ISO 18113-2:2009 also applies to information supplied by the manufacturer with... | |
| ISO 18113-3:2009 specifies requirements for information supplied by the manufacturer of in vitro dignostic (IVD) instruments for professional use. ISO 18113-3:2009 also applies to apparatus and equipment intended to be... | |
| ISO 18113-4:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents for self-testing. ISO 18113-4:2009 also applies to information supplied by the manufacturer with calibrators... | |
| ISO 18113-5:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) instruments for self-testing. ISO 18113-5:2009 also applies to apparatus and equipment intended to be used... | |
| ISO 18114:2003 specifies a method of determining relative sensitivity factors (RSFs) for secondary-ion mass spectrometry (SIMS) from ion-implanted reference materials. The method is applicable to specimens in which the matrix... | |
| ISO 18115-1:2013 defines terms for surface chemical analysis. It covers general terms and those used in spectroscopy. | |
| ISO 18115-2:2013 defines terms for surface chemical analysis. | |
| ISO 18116:2005 gives guidance on methods of mounting and surface treatment for a specimen about to undergo surface chemical analysis. It is intended for the analyst as an aid in... | |
| ISO 18117:2009 gives guidance on the handling of and the containers for specimens submitted for surface chemical analysis. It is intended for the user of surface analysis services as an... | |
| ISO 18118:2015 gives guidance on the measurement and use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials by Auger electron spectroscopy and X-ray photoelectron spectroscopy. | |
| ISO 18122:2015 specifies a method for the determination of ash content of all solid biofuels. | |
| ISO 18123:2015 aims to define the requirements and method used to determine the volatile matter content of solid biofuels. It is intended for persons and organisations that manufacture, plan, sell,... | |
| ISO 18125:2017 specifies a method for the determination of the gross calorific value of a solid biofuel at constant volume and at the reference temperature 25 °C in a bomb... | |
| ISO 18129:2015 provides an introduction on how to apply performance monitoring and diagnostics for machines, groups of machines, up to complete industrial installation (equipment) typically covering the whole lifetime of... | |
| ISO 18132-1:2011 establishes general principles for the accuracy, installation, calibration and verification of automatic tank gauges (ATGs) used for custody transfer measurement of liquefied natural gas (LNG) on board an... | |
| ISO 18132-3:2011 establishes general principles for the accuracy, installation, calibration and verification of automatic tank gauges (ATGs) used for custody transfer measurement of liquefied petroleum and chemical gases on board... | |
| ISO 18132:2008 establishes the general requirements for the specification, installation and calibration/verifica tion testing of automatic level gauges (ALG) used for refrigerated light hydrocarbon fluids, i.e., LNG and LPG, stored... | |
| ISO 18133:2016 defines the terms that are commonly used for the digital fitting system. The digital fitting system includes virtual fabric, virtual fabric properties, virtual garment pattern, virtual garment pattern... | |
| ISO 18134-1:2015 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and may be used when high precision... | |
| ISO 18134-2:2017 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision... | |
| ISO 18134-3:2015 describes the method of determining the moisture in the analysis test sample by drying in an oven. It is intended to be used for general analysis samples in... | |
| ISO 18135:2017 describes methods for preparing sampling plans and certificates, as well as taking samples of solid biofuels, for example, from the place where the raw materials grow, from production... | |
| ISO 18137:2015 specifies the technical specifications for leaf springs. ISO 18137:2015 is applicable to leaf springs for road vehicle (hereinafter simply "springs"). The leaf springs for other vehicle may refer... | |
| ISO 18139:2017 specifies design, manufacture and test method requirements for cryogenic globe valves for excellent quality leakage stability for use in a very low temperature environment (−50°C to −196°C). | |
| ISO 1813:2014 specifies the maximum electrical resistance of antistatic endless V-ribbed belts, joined V-belts, and single V-belts including wide section belts and hexagonal belts, as well as corresponding production control... | |
| ISO 18142:2014 specifies a method to determine the dynamic modulus of elasticity of specimens made of solid carbonaceous or graphite materials at room temperature by the resonance method. | |
| ISO 18144:2003 specifies a method for the sampling and determination of respirable suspended particles (RSP) and for the estimation of the RSP fraction attributable to environmental tobacco smoke (ETS). This... | |
| ISO 18145:2003 specifies a method for the sampling and determination of nicotine and 3-ethenylpyridine (3-EP) in environmental tobacco smoke (ETS). This method is applicable to personal and area sampling. | |
| ISO 18153:2003 specifies how to assure the metrological traceability of values assigned to calibrators and control materials intended to establish or verify trueness of measurement of the catalytic concentration of... | |
| ISO 18154:2017 specifies the requirements of design, test and inspection methods for diaphragm-type pilot operated safety valves, which are used in cargo tanks of LNG carriers in order to keep... | |
| ISO 18158:2016 specifies terms and definitions that are related to the assessment of workplace exposure (see 2.1.5.1) to chemical and biological agents (see 2.1.1.1). These are either general terms or... | |
| ISO 18164:2005 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks, buses and motorcycles. The relationship between... | |
| ISO 18170:2017 establishes the general requirements for electric motor driven, variable delivery, hydraulic pumps suitable for use in aircraft hydraulic systems. ISO 18170:2017 includes the general requirements for Alternating Current... | |
| ISO 18172-1:2007 specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded stainless steel gas cylinders, of water capacities from 0,5 l up... | |
| ISO 18172-2:2007 specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded stainless steel gas cylinders, of water capacities from 0,5 l up... | |
| ISO 18175:2004 describes procedures for evaluating the following performance characteristics of ultrasonic pulse-echo examination instruments: horizontal limit and linearity; vertical limit and linearity; resolution-entry surface and far surface; sensitivity and... | |
| ISO 1817:2015 describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in... | |
| ISO 18184:2014 specifies testing methods for the determination of the antiviral activity of the textile products. The textile products include woven and knitted fabrics, fibres, yarns, braids, etc. | |
| ISO 18185-1:2007 provides a system for the identification and presentation of information about freight container electronic seals. The identification system provides an unambiguous and unique identification of the container seal,... | |
| ISO 18185-2:2007 specifies a freight container seal identification system, with an associated system for verifying the accuracy of use, having: a seal status identification system; a battery status indicator; a... | |
| ISO 18185-3:2015 specifies test methods and conditions for environmental characteristics of electronic seals. ISO 18185-3:2015 describes the environmental requirements for the ISO 18185 series, for ISO 10374 and for ISO... | |
| ISO 18185-4:2007 specifies requirements for the data protection, device authentication and conformance capabilities of electronic seals for communication to and from a seal and its associated reader. These capabilities include... | |
| ISO 18185-5:2007 specifies the air interface between electronic container seals and Reader/Interrogators of those seals. It is to be used in conjunction with the other parts of ISO 18185. ISO... | |
| ISO 18187:2016 specifies a rapid method for assessing solid samples in an aerobic suspension, by determining the inhibition of dehydrogenase activity of Arthrobacter globiformis using the redox dye resazurin. It... | |
| ISO 18188:2016 specifies the general characteristics, requirements and methods for testing of polypropylene (PP) drinking straws (herein after called PP straws). It is applicable to PP straws having an inner... | |
| Iso 18189:2016 describes an in vitro test method to assess the potential cytotoxic effects that may arise due to interaction of contact lenses with contact lens care solutions. NOTE The... | |
| ISO 18190:2016 specifies the general requirements common to airways and related equipment and applicable to those device-specific standards that reference it. The requirements of a device-specific standard take priority over... | |
| ISO 18191:2015 specifies a spectrophotometric determination of the pHt of sea water on the total hydrogen ion concentration pH scale using the indicator dye m-cresol purple. The total hydrogen... | |
| ISO 18192‑2:2010 defines a test procedure for spinal nucleus prostheses under the relative angular movement conditions specified by ISO 18192‑1. ISO 18192‑2:2010 is applicable to both lumbar and cervical prostheses. | |
| ISO 18192-1:2011 defines a test procedure for the relative angular movement between articulating components, and specifies the pattern of the applied force, speed and duration of testing, sample configuration and... | |
| ISO 18192-3:2017 defines a test procedure to simulate and evaluate lumbar spinal disc prostheses wear under adverse impingement conditions. | |
| ISO 18197:2015 defines the requirements for the wide area centimetre class positioning system by broadcasting augmentation data through satellites as follows. - Centimetre class positioning According to the progress of... | |
| ISO 18201:2013 defines a Mission Operations (MO) reference model which provides a common basis for coordinating the development of CCSDS Recommended Standards for MO service specifications and serves as a... | |
| ISO 18202:2015 defines, in an abstract manner, the MAL in terms of: a) the concepts that it builds upon; b) the basic types it provides; c) the message headers required... | |
| ISO 18203:2016 specifies a method of measuring the case hardening depth, surface hardening depth, nitriding hardness depth and total thickness of surface hardening depth obtained, e.g. thermal (flame and induction... | |
| ISO 18207:2006 defines a simplified and reliable check procedure of the mechanical coupling devices between light trailers and towing vehicles, covered by ISO 3853 and European regulation (94/20/CE), which specify... | |
| ISO 18211:2016 specifies a method for long-range testing of carbon and low-alloy steel above-ground pipelines and plant piping using guided ultrasonic waves with axial propagation applied on the entire circumferential... | |
| ISO 18213-1:2007 describes procedures for tank calibration and volume determination for nuclear process tanks equipped with pressure-measurement systems for determining liquid content. Specifically, overall guidance is provided for planning a... | |
| ISO 18213-2:2007 presents procedures for standardizing a set of calibration data to a fixed set of reference conditions so as to minimize the effect of variations in ambient conditions that... | |
| ISO 18213-3:2009 presents statistical procedures that can be applied to tank calibration and volume measurement data for nuclear materials accountancy tanks. In particular, ISO 18213-3:2009 presents several diagnostic plots that... | |
| ISO 18213-4:2008 specifies a procedure for making accurate determinations of the liquid height in nuclear-materials-ac countancy tanks that are equipped with pneumatic systems for determining the liquid content. With such... | |
| ISO 18213-5:2008 specifies a procedure for making accurate determinations of liquid height in nuclear-materials-ac countancy tanks that are equipped with pneumatic systems for determining the liquid content. With such systems,... | |
| ISO 18213-6:2008 specifies a procedure for making accurate determinations of the densities of process liquids from in-tank measurements of the liquid content. This procedure is applicable to tanks equipped with... | |
| ISO 18217:2015 deals with all significant hazards, hazardous situations, and events as listed in Clause 4, which are relevant to edge banding machines fed by chains with manual loading and... | |
| ISO 18218-1:2015 is a method for determining ethoxylated alkylphenols (nonyphenol ethoxylate [NPEOn with 1 ≤ n ≤ 16] and octylphenol ethoxylate [OPEOn with 1 ≤ n ≤ 16]) in leather. | |
| ISO 18218-2:2015 is a method for determining alkylphenols (nonylphenol and octylphenol) and alkylphenol ethoxylates (nonylphenol ethoxylate and octylphenol ethoxylate) in leather and process auxiliaries. The analysis is based on high-performance... | |
| ISO 18219:2015 specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCP) C10-C13 in processed and unprocessed leathers. Annex A is for information only. | |
| ISO 18221:2016 specifies the minimum information to be provided to the user by the manufacturers of microscopes with digital displays regarding imaging performance. It further specifies terms and definitions for... | |
| ISO 18225:2012 specifies general and performance requirements for multilayer pipe systems based on pipes made from thermoplastics and intended to be used for gas supply outdoors. It gives requirements for... | |
| ISO 18227:2014 specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, and soil-like material by energy dispersive X-ray fluorescence (EDXRF) spectrometry... | |
| ISO 18229:2018 defines the essential technical requirements that are addressed in the process of design and construction of Generation IV (GEN IV) nuclear reactors. It does not address operation, maintenance... | |
| ISO 18232:2006 specifies the encoding and length for globally unique identifiers for data objects used in healthcare exchanged as alphanumeric strings. | |
| ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection... | |
| ISO 18237:2017 specifies: - test equipment, test circuit and a procedure for the evaluation of the water separation capabilities of a dehydrator; - a procedure for preparing test fluid; -... | |
| ISO 18238:2015 provides basic procedures and requirements of closed loop problem solving against product quality problems including failures, defects, accidents, and other undesirable conditions for organizations. ISO 18238:2015 is intended... | |
| ISO 1823:2015 specifies the characteristics of four types of oil suction and discharge hose assemblies used for the conveyance of petroleum, including crude oils and other liquid petroleum products. Each... | |
| ISO 18241:2016 specifies requirements for sterile, single-use, venous bubble traps intended to remove air entering the venous line during surgical procedures requiring extracorporeal circulatory support, which may include cardiopulmonary bypass... | |
| ISO 18242:2016 specifies requirements for sterile, single-use, extracorporeal centrifugal blood pumps, whether coated, non-surface modified, or surface-modified, intended for producing blood flow during extracorporeal circulation. Such blood flow is most... | |
| ISO 18243:2017 specifies the test procedures for lithium-ion battery packs and systems used in electrically propelled mopeds and motorcycles. The specified test procedures enable the user of this document to... | |
| ISO 18245:2003 defines code values used to enable the classification of merchants into specific categories based on the type of business, trade or services supplied. Values are specified only for... | |
| ISO 18246:2015 specifies safety requirements for conductive connection to an external electric power supply of electrically propelled mopeds and motorcycles. It is not applicable to vehicles not in normal conditions,... | |
| ISO 18249:2015 describes the general principles of acoustic emission testing (AT) of materials, components, and structures made of fibre-reinforced polymers (FRP) with the aim of - materials characterization, - proof... | |
| ISO 18251-1:2017 describes the main components, and their characteristics, constituting an infrared (IR) imaging system and related equipment used in non-destructive testing (NDT). It also aims to assist the user... | |
| ISO 18252 IDF 200:2006 specifies a routine gas liquid chromatographic method for the determination of the sterol composition in anhydrous milk fat extracted from dairy products directly on the unsaponifiable... | |
| ISO 18254-1:2016 describes analyses that are used to detect extractable alkylphenol ethoxylates (nonylphenol ethoxylates and octylphenol ethoxylates) in textile products. This document provides a method that uses Liquid Chromatograph (LC)... | |
| ISO 18257:2016 specifies the basic design requirements for semiconductor ICs for space applications, including its design process, as well as required tasks and requirements of each stage. Requirements of specific... | |
| ISO 18259:2014 specifies an antimicrobial efficacy end point methodology to determine compatibility of contact lens solutions, lens cases and hydrogel lenses for disinfection. This provides a process for evaluating compatibility... | |
| ISO 1825:2017 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling... | |
| ISO 18263-1:2015 establishes a system which can be used as the basis for specifications for mixtures of polypropylene (PP) and polyethylene (PE) recyclate. It covers mixtures of polypropylene (PP) and... | |
| ISO 18263-2:2015 specifies methods of preparation of test specimens and the standard test methods to be used in determining the properties of mixtures of polypropylene (PP) and polyethylene (PE) recyclate... | |
| ISO 18264:2016 specifies the requirements related to safety, including methods of rating and testing eye-and-eye and endless sling constructions used as single (1) leg, two (2) leg, three (3) leg... | |
| ISO 18265:2013 specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the... | |
| ISO 18273:2015 specifies requirements for classification of solid wires and rods for fusion welding of aluminium and aluminium alloys. The classification of the solid wires and rods is based on... | |
| ISO 18274:2010 specifies requirements for classification of solid wire electrodes, solid strip electrodes or solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire... | |
| ISO 18276:2017 specifies the requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in... | |
| ISO 18278-1:2015 specifies procedures for assessing the generic weldability for resistance welding of uncoated and coated metals. It is assumed for this and other linked standards that their application is... | |
| ISO 18278-2:2016 provides specific test procedures for the determination of the acceptable welding current range and the electrode life. It is applicable for the evaluation of the weldability of assemblies... | |
| ISO 18278-3:2017 specifies procedures for the determination of the acceptable welding current range and the electrode life for spot weld bonding using resistance spot welding with adhesive bonding. ISO 18278-3:2017... | |
| ISO 18279:2003 details a classification of imperfections that can occur in brazing joints. In addition guidance is provided on quality levels and suggested limits for imperfections are detailed. For requirements... | |
| ISO 1827:2016 specifies methods for the determination of the modulus in shear and the strength of bonds of rubber to metal or other rigid plates, using rubber bonded between four... | |
| ISO 18280:2010 provides an overview of the ISO test methods used to characterize epoxy resins. | |
| ISO 18283:2006 defines the basic terms used in manual sampling of hard coal and coke and describes the general principles of sampling. ISO 18283:2006 specifies procedures and requirements for establishing... | |
| ISO 18286:2008 specifies requirements for tolerances for hot-rolled stainless steel plates (quarto plates) made on a reversing mill with the following characteristics: nominal thickness, t, from 4 mm to 250... | |
| ISO 18287:2006 specifies the quantitative determination of 16 polycyclic aromatic hydrocarbons (PAH) according to the priority list of the Environmental Protection Agency, USA (EPA, 1982). ISO 18287:2006 is applicable to... | |
| ISO 18289:2014 specifies requirements for the design, construction, operation, safety, performance, and inspection rules of anchor winches. ISO 18289:2014 is applicable to anchor winches, with hydraulic or electric drive, installed... | |
| ISO 1828:2012 specifies the minimal characteristics of a categorial structure for terminological systems of surgical procedures and the minimal domain constraints to support interoperability, comparability and the exchange of meaningful... | |
| ISO 18292:2011 specifies a procedure for calculation of the energy performance of fenestration systems used in residential buildings, for rating of fenestration systems, doors and skylights, including the effects of... | |
| ISO 18295-1:2017 specifies service requirements for customer contact centres (CCC). It specifies a framework for any CCC that aims to assist in providing clients and customers with services that continuously... | |
| ISO 18295-2:2017 specifies requirements for organizations using the services of customer contact centres (CCC). It aims to ensure that customer expectations are consistently met through the provision and management of... | |
| ISO 18296:2014 specifies requirements for the design, operation, safety, performance, and inspection rules of ship-shifting winches, with electric or hydraulic drive. Such winches are applicable to longitudinal and transverse movements... | |
| ISO 18300:2016 specifies the lithium-ion battery systems combined with lead acid battery or electric double layer capacitor to be used for automotive applications in voltage class A systems. document applies... | |
| ISO 18301:2014 specifies a method for the determination of the conventional mass per volume of vegetable and animal oils and fats within the range of 0,800 kg/l to 1,000 kg/l... | |
| ISO 18308:2011 defines the set of requirements for the architecture of a system that processes, manages and communicates electronic health record (EHR) information: an EHR architecture. The requirements are formulated... | |
| ISO 18309:2014 covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs. ISO 18309:2014 is a companion document to ISO 13617. ISO 18309:2014 does not apply... | |
| ISO 18310-1:2017 specifies suitable methods for the measurement of ambient dose equivalent rate at a distance from the patient treated with radioiodine to ablate the thyroid. For this purpose, direct... | |
| ISO 18311:2016 specifies a technique for determining the effects of anthropogenic impacts (e.g. substances) in the context of the prevailing environmental conditions on the feeding activity of soil organisms in... | |
| ISO 18314-1:2015 specifies the method for determining the colour coordinates of a paint film. This method is only applicable to paint films that appear to be uniformly of one colour,... | |
| ISO 18314-2:2015 specifies the Saunderson correction for different measurement geometries and the solutions of the Kubelka-Munk equation for hiding and transparent layers. It also specifies methods for the calculations of... | |
| ISO 18314-3:2015 specifies different methods of calculating special indices, which are generally used to describe lightness respectively jetness of samples including chroma or hue within one colour-coordinate. ISO 18314-3:2015 is... | |
| ISO 18319:2015 specifies requirements for fibre-reinforced polymer (FRP) sheets for upgrading of concrete members. The methodologies to express the mechanical properties as characteristic values, appearance and dimensions, and sampling test... | |
| ISO 18321:2015 specifies a method for the determination of the peroxide value in an essential oil. The peroxide value is a measure of the oxidation present. | |
| ISO 18322:2017 specifies requirements for when a space test centre needs to demonstrate its competence to consistently provide space testing that meets customer requirements. It specifies requirements for space test... | |
| ISO 18323:2015 specifies a set of permitted descriptors for the diamond industry and is specifically designed to be understood by the consumer. The Standard also includes a series of definitions... | |
| ISO 18324:2016 specifies test procedures to measure natural frequencies, modal damping ratios and static deflection under a concentrated load of laboratory or field timber floors. These parameters have been found... | |
| ISO 18325:2015 specifies a test method for determining the water discharge capacity of prefabricated vertical drains (PVDs), which can be used for conformance and acceptance testing. This is an index... | |
| ISO 18329 IDF 193:2004 specifies a method for the quantitative determination of furosine in milk and milk products. The method is particularly applicable to raw or heat-treated milk and to... | |
| ISO 1832:2017 establishes a code for the designation of the usual types of indexable inserts for cutting tools in hard cutting materials or any other cutting materials, in order to... | |
| ISO 1833-10:2006 specifies a method, using dichloromethane, to determine the percentage of triacetate, after removal of non-fibrous matter, in textiles made of binary mixtures of triacetate or polylactide and wool,... | |
| ISO 1833-11:2017 specifies a method, using sulfuric acid, to determine the mass percentage of cellulose fibres, after removal of non-fibrous matter, in textiles made of mixtures of - natural and... | |
| ISO 1833-12:2006 specifies a method, using dimethylformamide, to determine the percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of binary mixtures of acrylic,... | |
| ISO 1833-13:2006 specifies a method, using carbon disulfide/acetone, to determine the percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of certain chlorofibres, whether after-chlorinated or... | |
| ISO 1833-14:2006 specifies a method, using acetic acid, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of acetate and certain chlorofibres or... | |
| ISO 1833-15:2006 specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of binary mixtures of... | |
| ISO 1833-16:2006 specifies a method, using xylene, to determine the percentage of polypropylene, after removal of non-fibrous matter, in textiles made of binary mixtures of polypropylene fibres and wool, animal... | |
| ISO 1833-17:2006 specifies a method, using sulfuric acid, to determine the percentage of chlorofibres, after removal of non-fibrous material, in textiles made of binary mixtures of chlorofibres based on homopolymers... | |
| ISO 1833-18:2006 specifies a method, using sulfuric acid, to determine the percentage of silk, after removal of non-fibrous matter, in textiles made of binary mixtures of silk and wool or... | |
| ISO 1833-19:2006 specifies a method, by heating, to determine the percentage of cellulosic fibre in textiles made of binary mixtures of cotton or regenerated cellulose and chrysotile and crocidolite asbestos. | |
| ISO 1833-1:2006 specifies a common method for the quantitative chemical analysis of various binary mixtures of fibres. This method and the methods described in the other parts of ISO 1833... | |
| ISO 1833-21:2006 specifies a method, using cyclohexanone, to determine the percentage of chlorofibre, modacrylic, elastane, acetate and triacetate, after removal of non-fibrous matter, in textiles made of binary mixtures of... | |
| ISO 1833-22:2013 is applicable, after removal of non-fibrous matter, to binary mixtures of viscose or certain types of the current cupro or modal or lyocell fibres with flax fibres. If... | |
| ISO 1833-24:2010 specifies a method using phenol and tetrachloroethane to determine the percentage of polyester after removal of non-fibrous matter, in textiles made of binary mixtures of certain polyester fibres... | |
| ISO 1833-25:2013 specifies a method using trichloroacetic acid and chloroform to determine the percentage of polyester fibres after removal of non-fibrous matter, in textiles made of binary mixtures of polyester... | |
| ISO 1833-26:2013 specifies a method using hot formic acid to determine the percentage of melamine fibres after removal of non-fibrous matter, in textiles made of binary mixtures of melamine fibres... | |
| ISO 1833-2:2006 specifies methods of quantitative chemical analysis of various ternary mixtures of fibres. | |
| ISO 1833-3:2006 specifies a method, using acetone, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of binary mixtures of acetate and wool, animal hair,... | |
| ISO 1833-4:2017 specifies a method, using hypochlorite, to determine the mass percentage of protein fibre, after removal of non-fibrous matter, in textiles made of mixtures of certain non-protein fibres and... | |
| ISO 1833-5:2006 specifies a method, using sodium zincate, to determine the percentage of viscose, cupro or modal fibre, after removal of non-fibrous matter, in textiles made of binary mixtures of... | |
| ISO 1833-6:2007 specifies a method, using a mixture of formic acid and zinc chloride, to determine the percentage of cotton, after removal of non-fibrous matter, in textiles made of binary... | |
| ISO 1833-7:2017 specifies a method, using formic acid, to determine the mass percentage of polyamide fibre, after removal of non-fibrous matter, in textiles made of mixtures of - polyamide with... | |
| ISO 1833-8:2006 specifies a method, using acetone, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of binary mixtures of acetate and triacetate fibres. | |
| ISO 1833-9:2006 specifies a method, using benzyl alcohol, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of binary mixtures of acetate and triacetate fibres. | |
| ISO 18330 IDF 188:2003 gives guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues in milk and milk products. It is intended to... | |
| ISO 18332:2007 defines porosity and its associated terms, and outlines the principles involved in porosity testing of metallic and related inorganic coatings. The purpose of porosity testing is also considered,... | |
| ISO 18333:2014 gives guidance on minimum recommended timber quality characteristics. It is applicable to new stringers, stringerboards, blocks, and deckboards used for flat wooden pallet assembly. ISO 18333:2014 does not... | |
| ISO 18334:2010 gives guidance on the minimum quality criteria concerning the assembly of new wooden pallets. This includes component placement accuracy, fastening schedules and fastener placement, the clinching of fasteners,... | |
| ISO 18338:2015 specifies the method for torsion test at room temperature of metallic materials. The tests are conducted at room temperature to determine torsional properties. | |
| ISO 18352:2009 specifies a method for determining the residual compression strength of multidirectional polymer matrix composite laminate plates that have been damaged by impact prior to the application of in-plane... | |
| ISO 18362:2016 specifies the minimum requirements for, and provides guidance on, a risk-based approach for the processing of cell-based health care products (CBHPs) requiring control of viable and non-viable microbial... | |
| ISO 18363-1:2015 describes a procedure for the indirect determination of 3-MCPD esters (bound 3-MCPD) and possible free 3-MCPD after alkaline catalysed ester cleavage and derivatization with phenylboronic acid (PBA). Furthermore,... | |
| ISO 18363-3:2017 specifies a procedure for the simultaneous determination of 2-MCPD esters (bound 2-MCPD), 3‐MCPD esters (bound 3‐MCPD) and glycidyl esters (bound glycidol) in a single assay, based on acid... | |
| ISO 18365:2013 gives requirements for the establishment and operation of a gauging station for the measurement of stage, or stage and discharge, of a lake, reservoir, river or canal or... | |
| ISO 18369-1:2017 identifies and defines the terms applicable to the physical, chemical and optical properties of contact lenses, their manufacture and uses. It provides a vocabulary of terms and, when... | |
| ISO 18369-2:2017 specifies the tolerance limits of the principal optical and physical parameters of rigid corneal, rigid scleral and soft contact lenses at the time of manufacture. These tolerances might... | |
| ISO 18369-3:2017 specifies the methods for measuring the physical and optical properties of contact lenses specified in ISO 18369‑2, i.e. radius of curvature, label back vertex power, diameter, thickness, inspection... | |
| ISO 18369-4:2017 specifies the methods of testing the physicochemical properties of contact lens materials. These are extraction, rigid lens flexure and breakage, oxygen permeability, refractive index and water content. | |
| ISO 18373-1:2007 specifies a method for the determination of the processing temperature of rigid PVC pipe samples. The method is based on the measurement of the thermal history using differential... | |
| ISO 18373-2:2008 specifies a method for the determination of the enthalpy of fusion of crystallites in rigid PVC pipe samples. The method is based on the measurement of the thermal... | |
| ISO 18375:2016 describes an open-loop test method for determining the yaw stability of a vehicle on a low friction road surface. It applies to heavy vehicles, that is commercial vehicles,... | |
| ISO 1837:2003 establishes the nomenclature for various types of hooks used on lifting equipment. | |
| ISO 18381:2013 establishes a data compression algorithm applied to digital three-dimensional image data from payload instruments, such as multispectral and hyperspectral imagers, and specifies the compressed data format. Data compression... | |
| ISO 18382:2013 provides recommended practices for the utilization of Radio Frequency Identification (RFID) protocol and communication standards in support of inventory management activities associated with space missions. The recommended practices... | |
| ISO 18383:2015 identifies a set of features that describes digital still cameras (DSCs), and it specifies their definitions, measurement methods, and presentation methods. This International Standard applies to DSCs designed... | |
| ISO 18385:2016 specifies requirements for the production of products used in the collection, storage, and analysis of biological material for forensic DNA purposes, but not those consumables and reagents used... | |
| ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering. It also intends to avoid unnecessary multiplicity of tools by a... | |
| ISO 18393-1:2012 specifies a test method for the determination of settlement of blown loose-fill insulation applied horizontally in ventilated attics. | |
| ISO 18395:2005 specifies a method for the determination of monoacylglycerols, diacylglycerols and triacylglycerols and also free glycerol by high-performance size-exclusion chromatography. It is applicable to products (e.g. emulsifiers) comprising monoacylglycerols... | |
| ISO 18397:2016 specifies requirements and test methods for air-powered and electrical-powered scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected... | |
| ISO 18400-100:2017 describes the structure of sampling standards for any kind of soil investigation. It also describes the coherence of the different parts in the ISO 18400 series. It provides... | |
| ISO 18400-101:2017 specifies the procedural elements to be taken in the preparation and application of a sampling plan. The sampling plan describes among other things what laboratory samples are to... | |
| ISO 18400-102:2017 gives guidelines for techniques for taking samples so that these can subsequently be examined for the purpose of providing information on soil quality. It gives information on equipment... | |
| ISO 18400-103:2017 gives guidelines for: - identification of hazards that could be encountered during a site investigation and when collecting samples of soil and other ground material, including hazards that... | |
| ISO 18400-105:2017 establishes general principles for packing, preservation, transport and delivery of samples of soil and related materials with an emphasis on requirements for when chemical analysis of the samples... | |
| ISO 18400-106:2017 provides guidelines for quality assurance and quality control (QA/QC) for soil sampling. It identifies the steps which are subject to QA and QC in situations where QA and... | |
| ISO 18400-107:2017 specifies the minimum information required for a sampling report independent of the purpose of the investigation. The preparation of the overall investigation report is not covered by this... | |
| ISO 18400-201:2017 specifies methods for the pretreatment of samples that can be applied "in the field" directly after sampling. Pretreatment methods in this document are limited to: - sample division... | |
| ISO 18400-204:2017 contains guidance on soil gas sampling using - active sampling (adsorbents, filters, air containers), and - passive sampling applied at permanent or temporary monitoring wells or other installations... | |
| ISO 18402:2016 specifies test methods for determining, for use in roofs, the structural properties of double-sided load bearing structural insulated panels having - two face layers, at least one of... | |
| ISO 18403:2016 specifies a test method intended to determine the maximum lateral force applied to a slide fastener for footwear under which it will close without failure. The method is... | |
| ISO 18404:2015 defines the competencies for the attainment of specific levels of competency with regards to Six Sigma, Lean, and "Lean & Six Sigma" in individuals, e.g. Black Belt, Green... | |
| ISO 18405:2017 defines terms and expressions used in the field of underwater acoustics, including natural, biological and anthropogenic (i.e. man-made) sound. It includes the generation, propagation and reception of underwater... | |
| ISO 18407:2017 describes the methodologies, procedures, and measurement systems to be used for the measurement of the radiated underwater acoustic sound generated during pile driving using percussive blows with a... | |
| ISO 18412:2005 specifies a method for the determination of chromium(VI) in drinking water in mass concentrations between 2 micrograms per litre and 50 micrograms per litre. For the determination of... | |
| ISO 18413:2015 specifies the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for... | |
| ISO 18416:2015 gives general guidelines for the detection and identification of the specified microorganism Candida albicans in cosmetic products. Microorganisms considered as specified in this International Standard might differ from... | |
| ISO 18418-1:2016 specifies the dimensional requirements of medium-pressure pipe end-connections for gasoline (spark ignition) engine fuel injection equipment. It is applicable to externally threaded end-connections having a 60° female cone... | |
| ISO 18418-2:2014 specifies dimensions and requirements for medium-pressure fuel pipe assemblies and assembled pipe sets made of seamless stainless steel tubing to be used with 60° female cone connectors on... | |
| ISO 18421:2016 specifies the construction and dimensions of housing for lifebuoys. The housing serves to encase a lifebuoy to protect it against deterioration from the elements and against vandalism. | |
| ISO 18422:2014 specifies a plate with instructions for rescue, resuscitation and first aid of drowning persons. This plate is intended for use - on inland navigation vessels; - at suitable... | |
| ISO 18423:2015 defines both transparent and regenerative PN ranging systems for non?data relay satellite users. The specification for PN code components and generation, on-board spacecraft regenerative/transpa rent processing, ground station... | |
| ISO 18424:2013 addresses the need for a standardized information model capable of supporting Telemetry/Telecomman d (TM/TC) definitions across the widest possible range of space domain activities. The goal is to... | |
| ISO 18425:2013 is one of a family of documents specifying the SOIS-compliant services to be provided by onboard subnetworks. ISO 18425:2013 defines services and service interfaces provided by the SOIS... | |
| ISO 18426:2013 is one of a family of documents specifying the SOIS-compliant services to be provided by onboard subnetworks. ISO 18426:2013 defines services and service interfaces provided by the SOIS... | |
| ISO 18427:2013 is one of a family of documents specifying the SOIS-compliant services to be provided by onboard subnetworks. ISO 18427:2013 defines services and service interfaces provided by the SOIS... | |
| ISO 18428:2013 is one of a family of documents specifying the SOIS-compliant services to be provided by onboard subnetworks. ISO 18428:2013 defines services and service interfaces provided by the SOIS... | |
| ISO 18431-1:2005 defines the mathematical transformations, including the physical units, that convert each category of vibration and shock data into a form that is suitable for quantitative comparison between experiments... | |
| ISO 18431-2:2004 specifies the algebraic functions which describe a selected set of time domain windows used for pre-processing digitally sampled vibration and shock data as a precursor to Discrete Fourier... | |
| ISO 18431-3:2014 specifies methods for the digital calculation of a time-frequency analysis of a given sampled measurement of a physical or engineering quantity, such as acceleration, force, or displacement, over... | |
| ISO 18431-4:2006 specifies methods for the digital calculation of a shock-response spectrum (SRS) given an acceleration input, by means of digital filters. The filter coefficients for different types of shock-response... | |
| ISO 18434-1:2008 provides an introduction to the application of infrared thermography (IRT) to machinery condition monitoring and diagnostics, where "machinery" includes machine auxiliaries such as valves, fluid and electrically powered... | |
| ISO 18435-1:2009 defines an integration modelling method and its use to integrate diagnostics, capability assessment, prognostics and maintenance applications with production and control applications. The integration of other application aspects,... | |
| ISO 18435-2:2012 defines the structures and templates for an application interaction matrix element; an application domain matrix element. ISO 18435-2:2012 also defines the relationship between these types of elements. | |
| ISO 18435-3:2015 defines the profiling methodology to use the interoperability templates of ISO 18435‑2. These profiling methods describe the construction and the use of application domain matrix elements (ADMEs), application... | |
| ISO 18436-1:2012 specifies requirements for persons and organizations ("assessment body") operating conformity assessment systems for personnel who perform machinery condition monitoring, identify machine faults, and recommend corrective action. Procedures for... | |
| ISO 18436-2:2014 specifies requirements for the training, relevant experience, and examination of personnel performing condition monitoring and diagnostics of machines using vibration analysis (VA). A certificate or declaration of conformity... | |
| ISO 18436-3:2012 defines the requirements for bodies operating training programmes for personnel who perform machinery condition monitoring, identify machine faults, and recommend corrective action. Procedures for training of condition monitoring... | |
| ISO 18436-4:2014 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using field lubricant analysis. It provides recognition of the qualifications and competence... | |
| ISO 18436-5:2012 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using laboratory-based lubricant analysis. A certificate or declaration of conformity to ISO... | |
| ISO 18436-6:2014 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using acoustic emission. A certificate or declaration of conformity to ISO 18436-6:2014... | |
| ISO 18436-7:2014 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using infrared thermography. A certificate or declaration of conformity to ISO 18436-7:2014... | |
| ISO 18436-8:2013 specifies the requirements for qualification and assessment of personnel who perform machinery condition monitoring and diagnostics using ultrasound. A certificate or declaration of conformity to ISO 18436-8:2013 provides... | |
| ISO 27654:2011 specifies the pressure test method to be applied to resistance-seam-weld ed specimens of different types of materials with single sheet thicknesses ranging from 0,3 mm to 3,2 mm. | |
| ISO17972-1:2015 defines an exchange format for colour and process control data (and the associated metadata necessary for its proper interpretation) in electronic form. It is the base document for describing... | |
| ISO18337:2015 describes a method for determining the lateral resolution of a confocal fluorescence microscope (CFM) by imaging an object with a size much smaller than the expected resolution. | |
| May be used as a quality-control test during manufacture and conversion of PVC compounds and for coloured compounds. Is not recommended for compounds in the form of dry blends. Defines... | |
| Page 2, clause 11: add "11.1" as a sub-clause number at the beginning of the first sentence. Replace the existing sub-clause "11 f)" by "11.2 In addition to 11.1, if... | |
| Page 3, clause 11: add "11.1" as a sub-clause number at the beginning of the first sentence. Replace the existing sub-clause "11 g)" by "11.2 In addition to 11.1, if... | |
| Provides rules for the presentation and the position of the contents list of periodicals (see also ISO 8). Cancels and replaces ISO Recommendation R 18-1956, of which it constitutes a... | |
| Sets out safety rules relating to continuous mechanical handling equipment, including its construction, installation, utilization and maintenance, to ensure that it is used to the best advantage, and to prevent... | |
| Small-angle X-ray scattering (SAXS) is a well-established technique that allows structural information to be obtained about inhomogeneities in materials with a characteristic length from 1 nm to 100 nm. Under... | |
| Specifies a potentiometric method of measuring the pH. Describes the principle, the preparation of the test sample, the test procedure, the expression of results, and the contents of the test... | |
| Specifies the basic characteristics (dimensions, power rating, nominal speed) of motorized driving pulleys for belt conveyors. | |
| Specifies the basic characteristics (geometrical and physical specifications) of the above mentioned types of handling equipment. | |
| Specifies the basic characteristics of oscillating conveyors and shaking or reciprocating feeders of the above mentioned types. Applies to conveyors or feeders with either rectangular or trapezoidal or flat-bottom or... | |
| The intent of ISO 18215:2015 is to provide guidance to ship design and operational personnel (crew) on the critical issues to consider regarding machinery, prior to and during vessel operations... | |
| The method is applicable to all machine-made textile floor coverings. It forms an integral part of other methods of test for textile floor coverings, and the result of this test... | |
| The method is applicable to alloys not containing cadmium and having zinc contents between 0,10 and 12,0 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling,... | |
| The method is applicable to alloys not containing cadmium and having zinc contents between 0,10 and 8,0 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling,... | |
| The method is applicable to the determination of iron contents up to 0.4 % (m/m) in any of the copper alloys listed in ISO publications. ISO 1812 specifies principle, reagents,... | |
| The methods are applicable to the given materials in the form of cast unwrought products (refinery shapes) such as cakes, billets, wire bars and ingots. The methods are intended to... | |
| The methods are applicable to the given materials in the form of wrought products (plate, sheet, strip, rod, bar, tube, profile, forgings, etc.) and castings (sand castings, chill castings, die... | |
| The objective of ISO 18091:2014 is to provide local governments with guidelines for achieving reliable results through the application of ISO 9001:2008 on an integral basis. These guidelines do not,... | |
| The principle of the method is maintaining a test portion of the PVC at an agreed temperature in a nitrogen gas stream, absorbing the hydrogen chloride evolved in a given... | |
| The purpose of ISO 17874-5:2007 is to provide guidance for the selection, installation and use of manually-operated remote handling tongs within nuclear installations. ISO 17874-5:2007 covers only the specific engineering... | |
| The requirements specify the quality of the material. The different methods of test are specified. They concern the porosity and imperfections of glaze, the resistance to heat and sudden change... | |
| The scope of ISO 18417:2017 covers - iodine sorbents for nuclear power plants, nuclear facilities, research and other nuclear reactors, - iodine sorbents for laboratories, including nuclear medicine, and -... | |
| The specified method applies to pieces of glass, preferable flat but if necessary curved, but from articles of laboratory glassware. Sample pieces are subjected to an aqueous hydrochloric acid solution,... | |
| The specified requirements deal with a series of inexpensive "commercial" liquid-in-glass thermometers, when great accuracy of measurement is not required. The temperature range covered is from -100 degrees centigrade to... | |
| The specified requirements deal with two series of inexpensive "commercial" liquid-in-glass thermometers, when great accuracy of measurement is not requirend: a series designated A to H, in which nominal ranges... | |
| This International Standard specifies a microtitration method to measure the degree of unsaturation in polyether polyols used in the production of polyurethanes. It is based on the reaction of mercuric... | |
| Three types of crucibels are specified: Type 1, low form, type 2 medium form and type 3 tall form bases an a height/diameter ratio of 0,63; 0,8 and 1,25 resp. |
| << Prev | Next >> |