CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| 1 Scope This International Standard establishes principles for deriving dimensions from anthropometric measurements and applying them to the design of workstations at non-mobile machinery. It is based on current ergonomic... | |
| Amends subclauses 5.8.2, 5.10.1.1, 6.4.2, 6.6.2, B.2.2, tables 2, 3, figures A.6, B.3, B.5, D.1, F.1, replaces subclause 5.10.3. | |
| Cancels and replaces the third edition (1991). Specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances... | |
| Defines 8 critical widths to enable the specification, without ambiguity, of these essential dimensions, particularly in orders, and specifies the range of nominal width, i.e. the width of the machine... | |
| Describes a reference method for the determination of the moisture content of meat and meat products. Replaces the first edition. | |
| Gives a classification and a nomenclature for machines and apparatus used in the bleaching, dyeing, printing and finishing industries, classified, as far as possible, by the operations for which they... | |
| Gives details for the manufacture and use of gauges for checking ISO general purpose metric screw threads. Specifies the features of gauges which are recommended for checking external and internal... | |
| Gives the requirements for circuit breakers having an inverse time/current characteristic, of normal ratings up to and including 35 A, for use in nominal 115/200 V three-phase 4OO Hz a. | |
| Gives the requirements for two classes of single-hole fixing switches for use in nominal 28 V d. c. and 115/200 V three-phase, 400 Hz a.c. systems. Class 1 switches are... | |
| ISO 14368-2:2002 specifies dimensional requirements of the interface for the assembly to the case by adhesive or using a gasket for round-shaped mineral and sapphire watch-glasses. | |
| ISO 14368-3:2003 specifies the nomenclature of defects and the test methods to check them, with minimum physical and aesthetic requirements, for circular mineral and sapphire watch-glasses. | |
| ISO 14373:2015 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the... | |
| ISO 14377 IDF 168:2002 specifies a graphite furnace atomic absorption spectrometric method for the determination of the tin content of (sterilized) canned evaporated milk. It is applicable to samples with... | |
| ISO 14378 IDF 167:2009 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the iodide content of pasteurized whole milk and dried skimmed milk, when present at levels... | |
| ISO 1437:2017 specifies a method for determining the water-wash sieve residue from regular, untreated carbon black for the rubber industry. It may not be applicable to oil-treated blacks because the... | |
| ISO 14380:2011 specifies a method for the determination of the lethal effects of toxicants to Thamnocephalus platyurus test organisms after 24 h exposure. A second method (rapid test) is described... | |
| ISO 14385-1:2014 specifies the procedures for establishing quality assurance for automated measuring systems (AMS) installed on industrial plants for the determination of the concentration of greenhouse gases in flue and... | |
| ISO 14385:2014 specifies procedures for establishing quality assurance for automated measuring systems (AMS) installed on industrial plants for the determination of the concentration of greenhouse gases in flue and waste... | |
| ISO 14388-1:2014 provides a general introduction to acid sulfate soils and the approaches that can be used to measure the various components of this special group of soils and their... | |
| ISO 14388-2:2014 specifies a suite of methods used to determine the net acidity in acid sulfate soils. ISO 14388-2:2014 specifies a method for measuring chromium reducible sulfur (SCR)... | |
| ISO 14388-3:2014 specifies a suite of methods used to determine net acidity in acid sulfate soils. ISO 14388-3:2014 specifies a method for the determination of pH in a 1 mol/l... | |
| ISO 14389:2014 specifies a method of determining phthalates in textiles with gas chromatography-mass spectrometry (GC-MS) with mass selective detector. It is applicable to textile products where there is a risk... | |
| ISO 1438:2017 defines the requirements for the use of rectangular and triangular (V-notch) thin-plate weirs for the measurement of flow of clear water in open channels under free flow conditions. | |
| ISO 14396 specifies the additional and method requirements for determining the power of reciprocating internal combustion (RIC) engines when presented for an exhaust emission test in accordance with ISO 8178,... | |
| ISO 14397-1:2007 specifies the means for determining the rated operating capacity of wheeled or crawler loaders or of the loader portion of backhoe loaders, having buckets and material handling forks,... | |
| ISO 14397-2:2007 specifies a test method for measuring the breakout forces and lift capacity to maximum lift height of wheeled or crawler loaders, or of the loader portion of backhoe... | |
| ISO 14400:2005 specifies requirements for the use, and general maintenance and safety of wheels and rims, and defines their out-of-service conditions, such as cracked, worn and bent wheels. It is... | |
| ISO 14401-1:2009 specifies a static test method for determining the field of vision provided by surveillance and rear-view mirrors fitted to earth-moving machinery as defined in ISO 6165. | |
| ISO 14401-2:2009 specifies criteria for the field‑of‑vision performance of surveillance and rear-view mirrors on earth-moving machinery. | |
| ISO 14403-1:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations from 2 µg/l to... | |
| ISO 14403-2:2012 specifies methods for the determination of cyanide in various types of water (such as ground, drinking, surface, leachate, and waste water) with cyanide concentrations usually from 2 µg/l... | |
| ISO 14404-1:2013 specifies calculation methods for the carbon dioxide (CO2) intensity of plant where steel is produced through a blast furnace. It includes boundary definition, material and energy... | |
| ISO 14404-2:2013 specifies calculation methods which companies using EAF to manufacture steel can use to evaluate the total annual carbon dioxide (CO2) emissions and the emission factor of... | |
| ISO 14404-3:2017 specifies calculation methods applicable to those companies using an electric arc furnace (EAF) to produce steel and having direct reduced iron (DRI) facilities within their premises. It can... | |
| ISO 14405-1:2016 establishes the default specification operator (see ISO 17450‑2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder",... | |
| ISO 14405-2:2011 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes to avoid the ambiguity that the use of ± tolerances on these dimensions causes. Both... | |
| ISO 14405-3:2016 establishes the default specification operator for angular size and defines a number of special specification operators for features of angular size: cone (truncated, i.e. frustum, or not), wedge... | |
| ISO 14406:2010 specifies the basic terminology for GPS extraction. It defines a framework for the fundamental operations used in GPS extraction and introduces the concepts of sampling and reconstruction for... | |
| ISO 14408:2016 specifies marking, labelling, and information to be supplied by the manufacturer for cuffed and uncuffed tracheal tubes and related materials designed to resist ignition by a laser | |
| ISO 14409:2011 specifies the terms and definitions, classification, materials and dimensions, test items and methods for air bags to be used for launching a vessel. It also specifies issues such... | |
| ISO 14416:2003 is applicable to the binding of books, periodicals and archive documents which have special requirements for durability and permanence. The use, as well as the wear and tear,... | |
| ISO 14419:2010 is applicable to the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions. ISO 14419:2010 is intended to provide... | |
| ISO 14420:2005 specifies a method to determine the coefficient of linear thermal expansion of carbonaceous or graphite materials (solid materials) for the production of aluminium between 20 °C and 300... | |
| ISO 14427:2004 describes the preparation of unbaked test specimens made by compacting carbonaceous ramming pastes. It also includes a method for the determination of the apparent density after compaction. | |
| ISO 14428:2005 specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium. | |
| ISO 14435:2005 applies to carbonaceous materials for the production of aluminium. ISO 14435:2005 describes a test method which covers the analysis for commonly determined trace metals in test specimens of... | |
| ISO 14436:2010 describes the specification and preparation of standard tap water, of conductivity between 40 mS/m and 150 mS/m, for drainability measurements. ISO 14436:2010 is applicable to all kinds of... | |
| ISO 14442:2006 provides procedures, not covered by the methods described in ISO 8692 and ISO 10253, for testing difficult substances for inhibition of algal growth. The main subjects covered by... | |
| ISO 14448:2016 specifies a quality standard and test methods for a low modulus adhesive composed of chemical reaction resins and used for the installation of tiles to exterior walls. | |
| ISO 14451-10:2013 specifies the types and order of tests to be applied to the semi finished products and sets out the acceptance criteria and means of categorization. ISO 14451-10:2013 applies... | |
| ISO 14451-1:2013 establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles. | |
| ISO 14451-2:2013 establishes uniform test methods for pyrotechnic articles for vehicles. | |
| ISO 14451-4:2013 specifies the types and order of tests to be applied to micro gas generators and sets out the associated acceptance criteria and means of categorization. ISO 14451-4:2013 applies... | |
| ISO 14451-5:2013 specifies the types and order of tests for application to the airbag gas generators and sets out the acceptance criteria and means of categorization. ISO 14451-5:2013 applies to... | |
| ISO 14451-7:2013 specifies the types and order of tests to be applied to the seatbelt pretensioners and sets out the associated acceptance criteria and means of categorization. ISO 14451-7:2013 applies... | |
| ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization. ISO 14451-8:2013 applies to type... | |
| ISO 14451-9:2013 specifies the types and order of tests to be applied to the actuators and sets out the associated acceptance criteria and means of categorization. ISO 14451-9:2013 applies to... | |
| ISO 14453:2014 describes the determination of acetone-soluble matter in pulp. It is applicable to all types of pulp. The lower limit of the determination is about 0,05 %. This limit... | |
| ISO 14454-3:2013 specifies labelling requirements for pyrotechnic articles for vehicles. | |
| ISO 14456:2015 gives a list of FTSC (fire potential, i.e. "oxidizing potential and flammability", toxicity, state of the gas, and corrosiveness) codes determined according to the relevant properties of gases... | |
| ISO 14457:2017 specifies requirements and test methods for handpieces and motors used in dentistry for treatment of patients and having patient contact, regardless of their construction. It also specifies requirements... | |
| ISO 14461-1 IDF 169-1:2005 describes a procedure for testing the performance of the colony-count technique within a laboratory by establishing the within-laboratory variability of its technique and identifying those steps... | |
| ISO 14461-2 IDF 169-2:2005 describes a routine procedure for the evaluation of results of the enumeration of microorganisms using colony-count methods with subsequent 10-fold dilution steps and one plate or... | |
| ISO 14469:2017 specifies CNG refuelling nozzles and receptacles constructed entirely of new and unused parts and materials, for road vehicles powered by compressed natural gas. A CNG refuelling connector consists... | |
| ISO 14470:2011 specifies requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food, and establishes guidelines for meeting the... | |
| ISO 14484:2013 provides general principles for the verification and assessment of the performance of concrete structures with the applications of different fibre-reinforced polymer (FRP) systems varying from internal FRP reinforcements/tendo... | |
| ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification... | |
| ISO 14488:2007 specifies methods for obtaining a test sample from a defined bulk of particulate material (powder, paste, suspension or dust) that can be considered to be representative of that... | |
| ISO 14490-1:2005 specifies the test methods for the determination of the following basic characteristics of telescopic systems and observational telescopic instruments: angular magnification; entrance pupil diameter; exit pupil diameter and... | |
| ISO 14490-2:2005 is applicable to binocular telescopic systems and specifies the test methods for determination of the following characteristics: non-parallelism of the axes of bundles of rays emergent from the... | |
| ISO 14490-3:2016 specifies test equipment and test procedures for determination of the following optical characteristics of telescopic sights: - axial parallax; - parallax; - eye relief range; - reticle tracking; | |
| ISO 14490-4:2005 is applicable to amateur astronomical telescopes. For general optical test methods of telescopic systems see ISO 14490-1. | |
| ISO 14490-5:2017 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments. | |
| ISO 14490-6:2014 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments. | |
| ISO 14490-7:2016 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments. | |
| ISO 14490-8:2011 describes test methods for determining the performance of night-vision devices as specified in ISO 21094. | |
| ISO 14500:2003 defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of,... | |
| ISO 14501│IDF 171:2007 specifies a method for the determination of aflatoxin M1 content in milk and milk powder. The limit of detection is 0,08 µg/kg for whole milk powder,... | |
| ISO 14502-1:2005 specifies a method for the determination of the total polyphenol content of leaf teas and instant teas by a colorimetric assay using Folin-Ciocalteu phenol reagent. It is applicable... | |
| ISO 14502-2:2005 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the total catechin content of tea from the summation of the individual catechins. It is applicable to... | |
| ISO 14505-2:2006 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is... | |
| ISO 14505-3:2006 gives guidelines and specifies a standard test method for the assessment, using human subjects, of thermal comfort in vehicles. It is not restricted to any particular vehicle but... | |
| ISO 14507:2003 specifies three methods for the pretreatment of soil samples in the laboratory prior to the determination of organic contaminants: if volatile organic compounds are to be measured; if... | |
| ISO 14509-1:2008 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of... | |
| ISO 14509-3:2009 specifies the procedures for assessing sound emission of powered monohull recreational craft of length up to 24 m with a Froude number greater than 1,1. It is not... | |
| ISO 14513:2016 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5... | |
| ISO 14518:2005 establishes a) methods for composition and measurement of test loads; b) procedures for the application of test loads during the testing of cranes. ISO 14518:2005 was developed in... | |
| ISO 1452-1:2009 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC‑U) solid-wall piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. In... | |
| ISO 1452-2:2009 specifies the characteristics of solid-wall pipes made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above ground drainage and sewerage... | |
| ISO 1452-3:2009 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above ground drainage and sewerage under... | |
| ISO 1452-4:2009 specifies the characteristics of valves made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. | |
| ISO 1452-5:2009 specifies the characteristics for the fitness for purpose of unplasticized poly(vinyl chloride) (PVC‑U) piping systems intended for water supply and for buried and above-ground drainage and sewerage under... | |
| ISO 14520-10:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable... | |
| ISO 14520-11:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 236fa extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-11:2016 covers... | |
| ISO 14520-12:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-01 extinguishant. It includes details of physical properties, specification, usage, and safety aspects. ISO 14520-12:2015 covers systems... | |
| ISO 14520-13:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-13:2015 covers systems... | |
| ISO 14520-14:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-55 extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-14:2015 covers systems... | |
| ISO 14520-15:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-541 extinguishant. It includes details of physical properties, specification, usage, and safety aspects. ISO 14520-15:2015 covers systems... | |
| ISO 14520-1:2015 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plants or other structures, and the characteristics of... | |
| ISO 14520-5:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-5:2016 covers only systems... | |
| ISO 14520-8:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-8:2016 covers... | |
| ISO 14520-9:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-9:2016 covers... | |
| ISO 14524:2009 specifies methods for the measurement of opto-electronic conversion functions (OECFs) of electronic still-picture cameras whose output is encoded as a digital image file. The OECF is defined as... | |
| ISO 14531-1:2002 specifies the physical properties and mechanical-performan ce requirements for crosslinked polyethylene (PE-X) pipes intended for use in the supply of gaseous fuels. In addition, it lays down dimensional... | |
| ISO 14531-2:2004 specifies the physical properties and mechanical performance requirements of crosslinked polyethylene (PE-X) and polyethylene (PE) socket, saddle and spigot fittings for the connection by socket or saddle heat-fusion... | |
| ISO 14531-3:2010 specifies the physical properties and mechanical-performan ce requirements for full-end-load-resist ant mechanical fittings for use in the connection of crosslinked polyethylene (PE‑X) pipes conforming to ISO 14531‑1 and... | |
| ISO 14531-4:2006 provides guidance for the design, construction, installation and on-site testing of PE-X pipeline systems. The standard deals with trenchless and open-trench installation methods. ISO 14531-4:2006, when used in... | |
| ISO 14532:2014 establishes the terms, definitions, symbols, and abbreviations used in the field of natural gas. The terms and definitions have been reviewed and studied in order to cover all... | |
| ISO 14533-1:2014 specifies the elements, among those defined in CMS Advanced Electronic Signatures (CAdES), that enable verification of a digital signature over a long period of time. It does not... | |
| ISO 14533-2:2012 specifies the elements, among those defined in XML Advanced Electronic Signatures (XAdES), that enable verification of a digital signature over a long period of time. ISO 14533-2:2012 does... | |
| ISO 14534:2011 specifies safety and performance requirements for contact lenses, contact lens care products, and other accessories for contact lenses. ISO 14534:2011 does not specify electrical safety and electromagnetic compatibility... | |
| ISO 14540:2013 specifies dimensional and performance requirements for hydraulic screw-to-connect quick-action couplings designed to be used at pressure of 72 MPa (720 bar) in static conditions as an interface between... | |
| ISO 14541:2013 specifies the dimensional and performance requirements for hydraulic screw-to-connect quick-action couplings for general use. | |
| ISO 14544:2013 specifies the conditions for determination of compression properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C. ISO 14544:2013 applies to... | |
| ISO 14551-6:2013 specifies the types and order of tests for application to the airbag modules and sets out the acceptance criteria and means of categorization. ISO 14551-6:2013 applies to type... | |
| ISO 14554-1:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the... | |
| ISO 14554-2:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the... | |
| ISO 14555:2017 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality... | |
| ISO 14556:2015 specifies a method of instrumented Charpy V-notch pendulum impact testing on metallic materials and the requirements concerning the measurement and recording equipment. With respect to the Charpy pendulum... | |
| ISO 14558:2016 specifies a method for determining the residual unsaturation in hydrogenated nitrile rubber (HNBR) by measuring the infrared (IR) absorbance of HNBR films cast from solution. ISO 14558:2016 assumes... | |
| ISO 1456:2009 specifies requirements for decorative nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings that are applied to iron, steel, zinc alloys, copper and... | |
| ISO 14572:2011 specifies test methods and requirements for basic- and high-performance round, single- or multi-core sheathed cables intended for use in road vehicle applications where the nominal system voltage is... | |
| ISO 14574:2013 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C. ISO 14574:2013 applies to... | |
| ISO 14577-1:2015 specifies the method of instrumented indentation test for determination of hardness and other materials parameters for the following three ranges: macro range: 2 N ≤ F ≤ 30... | |
| ISO 14577-2:2015 specifies the method of verification and calibration of testing machines for carrying out the instrumented indentation test in accordance with ISO 14577‑1:2015. It describes a direct verification method... | |
| ISO 14577-3:2015 specifies a method for the calibration of reference blocks to use for the indirect verification of testing machines for the instrumented indentation test as specified in ISO 14577‑2:2015. | |
| ISO 14577-4:2016 specifies a method for testing coatings which is particularly suitable for testing in the nano/micro range applicable to thin coatings. However, the application of this method of this... | |
| ISO 14579:2011 specifies the characteristics of hexalobular socket head cap screws, with thread sizes from M2 up to and including M20, of product grade A. | |
| ISO 14580:2011 specifies the characteristics of hexalobular socket cheese head screws of product grade A and with thread sizes from M2 up to and including M10. | |
| ISO 14581:2013 specifies the characteristics of hexalobular socket countersunk flat head screws in product grade A and with threads from M2 to M10 inclusive and with reduced loadability (according to... | |
| ISO 14582:2013 specifies hexalobular socket countersunk head bolts and screws with high head (full loadability), of product grade A, and thread diameters from M3 up to and including M10 and... | |
| ISO 14583:2011 specifies the characteristics of hexalobular socket pan head screws of product grade A and with thread sizes from M2 up to and including M10. | |
| ISO 14584:2011 specifies the characteristics of hexalobular socket raised countersunk head screws of product grade A, and with thread sizes from M2 up to and including M10. | |
| ISO 14585:2011 specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in... | |
| ISO 14586:2011 specifies the characteristics of hexalobular socket countersunk head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those listed in... | |
| ISO 14587:2011 specifies the characteristics of hexalobular socket raised countersunk (oval) head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive. If, in special cases, specifications other than those... | |
| ISO 14590:2016 applies to cold-reduced steel sheet of two types that are commercially available in the world. Type 1 represents steels that are produced to mechanical properties only and Type... | |
| ISO 14592-1:2002 specifies a test method for evaluating the biodegradability of organic test compounds by aerobic microorganisms in surface waters by means of a shake-flask batch test with suspended biomass. | |
| ISO 14592-2:2002 specifies a method for evaluating the biodegradability of organic test compounds by aerobic microorganisms in natural waters by means of a continuous flow river model with attached biomass. | |
| ISO 14594:2014 gives the general guidelines for the determination of experimental parameters relating to the primary beam, the wavelength spectrometer, and the sample that need to be taken into account... | |
| ISO 14595:2014 gives recommendations for single-phase certified reference materials (CRMs) used in electron probe microanalysis (EPMA). It also provides guidance on the use of CRMs for the microanalysis of flat,... | |
| ISO 14596:2007 specifies a method for the determination of the sulfur content of liquid petroleum products, additives for petroleum products, and semi-solid and solid petroleum products that are either liquefied... | |
| ISO 14602:2010 specifies particular requirements for non-active surgical Implants for osteosynthesis, referred to as implants. In addition to ISO 14630, ISO 14602:2010 gives particular requirements for intended performance, design attributes,... | |
| ISO 14603:2012 describes a test method for the determination of open-hole tensile strengths of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to all... | |
| ISO 14604:2012 describes a method of measuring the fracture strain of ceramic coatings by means of uniaxial tension or compression tests coupled with acoustic emission to monitor the onset of... | |
| ISO 14605:2013 specifies the light source and radiometer used in the performance evaluation of semiconducting photocatalytic materials used under an indoor lighting environment in a laboratory. A light source of... | |
| ISO 14606:2015 gives guidance on the optimization of sputter-depth profiling parameters using appropriate single-layered and multilayered reference materials in order to achieve optimum depth resolution as a function of instrument... | |
| ISO 14607:2018 specifies particular requirements for mammary implants. With regard to safety, this document specifies requirements for intended performance, design attributes, materials, design evaluation, manufacturing, packaging, sterilization, and information supplied... | |
| ISO 14610: 2012 describes a test method for determining the flexural strength of porous fine ceramics in air at room temperature. | |
| ISO 14617-13:2004 specifies graphical symbols in diagrams for casting machines and machine tools. | |
| ISO 14617-14:2004 specifies graphical symbols in diagrams for components and devices for material transport and handling. | |
| ISO 14617-15:2002 specifies graphical symbols for use on installation diagrams (e.g. for buildings) and network maps, supplementing the symbols specified in ISO 14617-2 to ISO 14617-12. Symbols on such diagrams... | |
| ISO 14617-1:2005 serves as an introduction to all the other parts of ISO 14617. In particular, it gives information on the creation and use of registration numbers for identifying graphical... | |
| ISO 14619:2003 specifies the procedure for preparing and carrying out space experiments and processing the resulting data, and applies to both manned and unmanned space systems, excluding exploratory rockets with... | |
| ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not... | |
| ISO 14620-3:2005 sets out the minimum requirements for Flight Safety Systems, including flight termination systems (externally controlled system or on-board automatic system), tracking systems, and telemetry data transmitting systems for... | |
| ISO 14620:2011 specifies requirements for the safety liabilities of countries undertaking space activities or allowing operators to perform space activities on or from their territory under outer space treaties adopted... | |
| ISO 14621-1:2003 addresses the preferred program elements recommended for EEE parts. ISO 14621-1:2003 is written in general terms as a baseline for developing and implementing a parts program. | |
| ISO 14621-2:2003 establishes technical guidelines for developing and documenting an electrical, electronic and electromechanical (EEE) parts control program, in order to assure that the parts used in the flight hardware... | |
| ISO 14623:2003, based on general space experience and practice, specifies general and detailed requirements for metallic pressure vessels, composite overwrapped pressure vessels with metallic liners and metallic pressurized structures used... | |
| ISO 14624-1:2003 specifies a method for the determination of the flammability of aerospace materials by upward flame propagation. Specifically, this test determines if a material, when exposed to a standard... | |
| ISO 14624-2:2003 specifies two test methods for determining the flammability of electrical-wire insulation and accessory materials by exposure to an external ignition source in a static environment (Test A) and... | |
| ISO 14624-3:2005 specifies a method for determining the identity and quantity of volatile offgassed products from materials and assembled articles utilized in manned, pressurized spacecraft. This test method is not... | |
| ISO 14624-4:2003 specifies a test method for determining the flammability of aerospace materials in pressurized gaseous oxygen (GOX) and oxygen-enriched environments, at ambient temperature. This method may also be used... | |
| ISO 14624-5:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-5:2006 may be used to determine the reactivity... | |
| ISO 14624-6:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-6:2006 can be used to determine the reactivity... | |
| ISO 14624-7:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid. ISO 14624-7:2006 can be used to determine the reactivity... | |
| ISO 14625:2007 specifies the general characteristics, performance, design, test, safety, reliability, maintainability and quality requirements for ground support equipment (GSE) and systems intended for use at launch, landing or retrieval-site... | |
| ISO 14627:2012 describes a test method that covers the determination of fracture resistance of silicon nitride bearing balls at room temperature by the indentation fracture (IF) method, as specified in... | |
| ISO 14628:2012 specifies a test method for rolling contact fatigue of silicon nitride ceramics under stepwise loading that is carried out at room temperature. This test may be used as... | |
| ISO 14629:2012 specifies a test method to determine the flowability of granulated or ungranulated ceramic powders by means of a specified funnel. The method is applicable only to powders which... | |
| ISO 14630:2012 specifies general requirements for non-active surgical implants. ISO 14630:2012 is not applicable to dental implants, dental restorative materials, transendodontic and transradicular implants, intra-ocular lenses and implants utilizing viable... | |
| ISO 14635-2:2004 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of high EP oils defined by the gear surface damage known... | |
| ISO 14635-3:2005 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of semi-fluid gear greases defined by the gear surface damage known... | |
| ISO 14637 IDF 195:2004 specifies an enzymatic method for the determination of the urea content of milk by measurement of the difference in pH. | |
| ISO 14638:2014 is a fundamental ISO GPS standard. It explains the concept of Geometrical Product Specification (ISO GPS), and provides a framework to illustrate how current and future ISO GPS... | |
| ISO 1463:2002 describes a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using... | |
| ISO 14644-10:2012 defines the classification system for cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or elements (including molecules, ions, atoms and particles). It is... | |
| ISO 14644-13:2017 gives guidelines for cleaning to a specified degree on cleanroom surfaces, surfaces of equipment in a cleanroom and surfaces of materials in a cleanroom. Under consideration are all... | |
| ISO 14644-14:2016 specifies a methodology to assess the suitability of equipment (e.g. machinery, measuring equipment, process equipment, components and tools) for use in cleanrooms and associated controlled environments, with respect... | |
| ISO 14644-15:2017 provides requirements and guidelines for assessing the chemical airborne cleanliness of equipment and materials which are foreseen to be used in cleanrooms and associated controlled environments which are... | |
| ISO 14644-1:2015 specifies the classification of air cleanliness in terms of concentration of airborne particles in cleanrooms and clean zones; and separative devices as defined in ISO 14644‑7. Only particle... | |
| ISO 14644-2:2015 specifies minimum requirements for a monitoring plan for cleanroom or clean zone performance related to air cleanliness by particle concentration, based upon parameters that measure or affect airborne... | |
| ISO 14644-3:2005 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. Performance tests are specified for two types of... | |
| ISO 14644-5:2004 specifies basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. Aspects of safety that have no direct bearing on contamination... | |
| ISO 14644-7:2004 specifies the minimum requirements for the design, construction, installation, test and approval of separative devices, in those respects where they differ from cleanrooms as described in ISO 14644-4... | |
| ISO 14644-8:2013 establishes the classification of air chemical cleanliness (ACC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category) and... | |
| ISO 14644-9:2012 establishes the classification of cleanliness levels on solid surfaces by particle concentration in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as... | |
| ISO 14649-10:2004 specifies the process data which is generally needed for NC-machining and therefore common to several machining technologies. These data elements describe the interface between the programming system (i.e. | |
| ISO 14649-111:2010 specifies the data elements describing cutting tool data for milling machine tools and machining centres, which work together with the process data for milling machine tools and machining... | |
| ISO 14649-11:2004 specifies the technology-specific data elements needed as process data for milling. Together with the general process data described in ISO 14649-10, it describes the interface between a computerized... | |
| ISO 14649-121:2005 specifies the data elements describing cutting tool data for turning machine tools and machining centres. They work together with ISO 14649-12, the process data for turning machine tools... | |
| ISO 14649-12:2005 specifies the technology-specific data elements needed as process data for turning. Together with the general process data described in ISO 14649-10, it describes the interface between a computerized... | |
| ISO 14649-13:2013 specifies the technology-specific data element needed as process data for wire-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical... | |
| ISO 14649-14:2013 specifies the technology-specific data element needed as process data for sink-EDM. Together with the general process data described in ISO 14649‑10, it describes the interface between computerized numerical... | |
| ISO 14649-1:2003 provides an introduction and overview of a data model for Computerized Numerical Controllers and explains its advantages and basic principle, based on the concepts of Product Data. | |
| ISO 1464:2018 specifies the minimum clear space to be provided beneath the aircraft main jacking points, in order to accommodate tripod jacks and thus ensure adequate clearance between the jacks... | |
| ISO 14657:2005 specifies requirements for hot-dip zinc (galvanized) coating on steel reinforcing bars, wire and welded fabric used in the reinforcement of concrete. It specifies three classes, class A, class... | |
| ISO 14673-1 IDF 189-1:2004 specifies a method for the determination of the nitrate and nitrite contents of milk and milk products by cadmium reduction and spectrometry. The method is applicable... | |
| ISO 14673-2 IDF 189-2:2004 specifies a routine method for the determination of the nitrate and nitrite contents of milk and milk products by segmented flow analysis. The method is applicable... | |
| ISO 14673-3 IDF 189-3:2004 specifies a routine method for the determination of the nitrate and nitrite contents of milk and milk products by cadmium reduction and flow injection analysis (FIA). | |
| ISO 14674 IDF 190:2005 specifies a method for the determination of the aflatoxin M1 (AFM1) content of milk and milk powder by a method including a clean-up step using... | |
| ISO 14675 IDF186:2002 give guidelines on the use of screening methods used for the determination of aflatoxin M1 content in milk and milk products, based upon competitive enzyme immuno-assays. | |
| ISO 14678:2005 describes seven methods for the assessment of the flow characteristics of adhesives after application at room temperature and during cure, by the measurement of sagging. These methods may... | |
| ISO 14686:2003 describes the factors to be considered and the measurements to be made when designing and performing a pumping test, in addition to a set of guidelines for field... | |
| ISO 14687-2:2012 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road... | |
| ISO 14687-3:2014 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product for utilization in stationary proton exchange membrane (PEM) fuel cell power systems. | |
| ISO 14688-1:2017 specifies the rules for the identification and description of soils and is intended to be read in conjunction with ISO 14688‑2, which outlines the basis of classification of... | |
| ISO 14688-2:2017 specifies the basic principles for classification of those material characteristics most commonly used for soils for engineering purposes. It is intended to be read in conjunction with ISO... | |
| ISO 14689:2017 specifies the rules for the identification and description of rock material and mass on the basis of mineralogical composition, genetic aspects, structure, grain size, discontinuities and other parameters. | |
| ISO 14691:2008 specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines for general-purpose applications in the petroleum, petrochemical and natural gas industries. | |
| ISO 14692-1:2017 defines the applications, pressure rating methodology, the classification of the products according to application, type of joint and resin matrix and the limitations to both the materials of... | |
| ISO 14692-2:2017 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any... | |
| ISO 14692-3:2017 gives guidelines for the design of GRP piping systems. The requirements and recommendations apply to layout dimensions, hydraulic design, structural design, detailing, fire endurance, spread of fire and... | |
| ISO 14692-4:2017 gives requirements and recommendations for the fabrication, installation, inspection and maintenance of GRP piping systems for use in oil and natural gas industry processing and utility service applications. | |
| ISO 14693:2003 provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication... | |
| ISO 14694:2003 gives specifications for vibration and balance limits of fans for all applications except those designed solely for air circulation, for example, ceiling fans and table fans. However, it... | |
| ISO 14695:2003 describes a method of measuring the vibrational characteristics of fans of all types, except those designed solely for air circulation, for example, ceiling fans and table fans. However,... | |
| ISO 14696:2009 provides a method for measuring the response of materials, products and assemblies exposed in vertical orientation to controlled levels of radiant heating with a piloted ignition source. The... | |
| ISO 14697:2007 gives guidance on the choice of substrates for building and transport products, when required, for use in reaction to fire tests. ISO 14697:2007 is applicable to those building... | |
| ISO 14698-2:2003 gives guidance on methods for the evaluation of microbiological data and the estimation of results obtained from sampling for viable particles in risk zones for biocontamination control. It... | |
| ISO 14698:2003 establishes the principles and basic methodology of a formal system of biocontamination control (Formal System) for assessing and controlling biocontamination when cleanroom technology is applied for that purpose. | |
| ISO 14701:2011 specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X-ray... | |
| ISO 14703:2008 specifies a general wet-sample preparation technique common to the size analysis of powdered fine ceramic materials. The analyzed size distribution of fine particles is strongly dependent on the... | |
| ISO 14704:2016 specifies a test method for determining the flexural strength of monolithic fine ceramics, and whisker- or particulate-reinforc ed ceramic composites, at room temperature and applies to materials with... | |
| ISO 14705:2016 specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature. | |
| ISO 14706:2014 specifies a TXRF method for the measurement of the atomic surface density of elemental contamination on chemomechanically polished or epitaxial silicon wafer surfaces. The method is applicable to... | |
| ISO 14707:2015 provides guidelines that are applicable to bulk and depth profiling GD-OES analyses. The guidelines discussed herein are limited to the analysis of rigid solids, and do not cover... | |
| ISO 14708-1:2014 specifies requirements that are generally applicable to active implantable medical devices. The tests that are specified in ISO 14708 are type tests and are to be carried out... | |
| ISO 14708-2:2012 specifies requirements that are applicable to those active implantable medical devices intended to treat bradyarrhythmias. The tests that are specified in ISO 14708-2:2012 are type tests, and are... | |
| ISO 14708-3:2017 is applicable to active implantable medical devices intended for electrical stimulation of the central or peripheral nervous system. The tests that are specified in this document are type... | |
| ISO 14708-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection. The protection afforded by the sherardized coating... | |
| ISO 14708-4:2008 is applicable to active implantable medical devices intended to deliver medicinal substances to site-specific locations within the human body. ISO 14708-4:2008 is also applicable to some non-implantable parts... | |
| ISO 14708-5:2010 specifies requirements for safety and performance of active implantable circulatory support devices. It is not applicable to extracorporeal perfusion devices, cardiomyoplasty, heart restraint devices and counter-pulsation devices, such... | |
| ISO 14708-6:2010 specifies requirements that are applicable to implantable cardioverter defibrillators and the functions of active implantable medical devices intended to treat tachyarrhythmia. ISO 14708-6:2010 is also applicable to some... | |
| ISO 14708-7:2013 specifies requirements that are applicable to those active implantable medical devices that are intended to treat hearing impairment via electrical stimulation of the auditory pathways. The tests that... | |
| ISO 14711:2003 gives guidelines for areas to be addressed and defines the products that are to be generated to develop a space systems mission operations concept. ISO 14711:2003 enables the... | |
| ISO 14713-1:2017 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance... | |
| ISO 14713-2:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be hot dip galvanized for corrosion protection. The protection afforded by the... | |
| ISO 14717:2008 specifies certain characteristics of the essential oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb. f.], with a view to facilitating the assessment of its quality. | |
| ISO 14719:2011 specifies a spectral photometric method with 1,10-phenanthroline for the quantitative determination of Fe2+ and Fe3+ in oxidic raw and basic materials for ceramics, glass and glazes,... | |
| ISO 14720-1:2013 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, such as silicon carbides, silicon nitrides, graphites, carbon blacks, cokes,... | |
| ISO 14721:2012 defines the reference model for an open archival information system (OAIS). An OAIS is an archive, consisting of an organization, which may be part of a larger organization,... | |
| ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the... | |
| ISO 14726:2008 specifies main colours and additional colours for identifying piping systems in accordance with the content or function on board ships and marine structures. These colours can also be... | |
| ISO 14728-1:2017 specifies methods of calculating the basic dynamic load rating and basic rating life for linear motion rolling bearings manufactured from contemporary, commonly used, high quality, hardened bearing steel... | |
| ISO 14728-2:2017 specifies methods of calculating the basic static load rating, static equivalent load and static safety factor for linear motion rolling bearings manufactured from contemporary, commonly used, high quality,... | |
| ISO 14730:2014 specifies a procedure to be used in evaluating the antimicrobial preservative activity of all preserved multidose contact lens care products, and provides guidance on methods to be used... | |
| ISO 14731:2006 identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities. In any manufacturing organization, welding coordination can be undertaken by one or a number of... | |
| ISO 14732:2013 specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding. ISO 14732:2013 does not apply to personnel exclusively performing loading or unloading... | |
| ISO 14737:2015 specifies requirements for carbon and low alloy cast steel grades for general applications. NOTE Annex B gives information on ISO grade designation and available UNS numbers which are... | |
| ISO 14743:2004 specifies the general requirements and test methods for the design and performance of push-in connectors for use with thermoplastic tubes with outside diameters of 3 mm to 12... | |
| ISO 14744-1:2008 specifies requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises. | |
| ISO 14780:2017 defines methods for reducing combined samples (or increments) to laboratory samples and laboratory samples to sub-samples and general analysis samples and is applicable to solid biofuels. The methods... | |
| ISO 14785:2014 establishes minimum quality requirements for services provided by tourist information offices (TIO) of any type and size, whether publicly or privately operated, in order to satisfy visitors' expectations. | |
| ISO 14788:2017 is applicable to the minimum requirements for steel sheet, in coils and cut lengths, metallic-coated by the continuous hot-dip process, with zinc-5 % aluminium alloy coating. The product... | |
| ISO 14790:2005 specifies the essential requirements (including certain quality aspects) of snowboard plate bindings without release mechanism. It is applicable to non-releasable snowboard plate bindings for adults and children. ISO... | |
| ISO 14792:2011 specifies tests for determining the steady-state directional control response of heavy vehicles, one of the factors composing vehicle dynamics and road-holding properties. ISO 14792:2011 is applicable to heavy... | |
| ISO 14793:2011 specifies test methods for determining the transient response behaviour of heavy commercial vehicles, heavy commercial vehicle combinations, buses and articulated buses, as defined in ISO 3833 for trucks... | |
| ISO 14794:2011 specifies open-loop test methods for determining the effect of braking on the course-holding and directional behaviour of heavy vehicles or heavy vehicle combinations when braking is accomplished using... | |
| ISO 14798:2009 establishes general principles and specific procedures for assessing risk. Its purpose is to provide a process for making decisions relevant to the safety of lifts during the design,... | |
| ISO 1479:2011 specifies the characteristics of hexagon head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive. | |
| ISO 148-1:2016 specifies the Charpy (V-notch and U-notch) pendulum impact test method for determining the energy absorbed in an impact test of metallic materials. This part of ISO 148 does... | |
| ISO 148-2:2016 covers the verification of pendulum-type impact testing machines, in terms of their constructional elements, their overall performance and the accuracy of the results they produce. It is applicable... | |
| ISO 148-3:2016 specifies the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148‑2. It specifies notched... | |
| ISO 14801:2016 specifies a method of dynamic testing of single post endosseous dental implants of the transmucosal type in combination with their premanufactured prosthetic components. It is most useful for... | |
| ISO 14802:2012 gives guidance on some generally accepted methods of statistical analysis which are useful in the interpretation of corrosion test results. ISO 14802:2012 does not cover detailed calculations and... | |
| ISO 14813-1:2015 provides a description of the primary services that an ITS implementation can provide to ITS users. Those services with a common purpose can be collected together in "'ITS... | |
| ISO 14813-5:2010 gives requirements for the description and documentation of the architecture of intelligent transport systems (ITS) in standards dealing with ITS. It also gives the definitions of terms to... | |
| ISO 14813-6:2017 provides a formal means to achieve consistency in the use of ASN.1 when specifying data types that are to be used in ITS International Standards. This is designed... | |
| ISO 14814:2006 establishes a common framework to achieve unambiguous identification in ITS/RTTT (Intelligent Transport Systems/Road Transport and Traffic Telematics) AVI/AEI (Automatic Vehicle Identification/Autom atic Equipment Identification) applications. This scheme and... | |
| ISO 14815:2005 defines a generic Automatic Vehicle Identification/Autom atic Equipment Identification (AVI/AEI) System specification for nominal AVI/AEI to provide an enabling International Standard, which, whilst allowing the system specifier to... | |
| ISO 14816:2005 establishes a common framework data structure for unambiguous identification in RTTT/ITS systems. It excludes any physical aspects such as interfaces. It is neither frequency- nor air interface protocol-specific. | |
| ISO 14817-1:2015 specifies the logical structure (framework) and the data content (substance) of intelligent transport systems (ITS) data dictionaries (DDs). Specifically, this part of ISO 14817 specifies the following: -... | |
| ISO 14817-2:2015 specifies the registration process to enter data concepts into the Central ITS Data Concept Registry (CIDCR). The CIDCR is designed to include data concepts that conform to ISO... | |
| ISO 14817-3:2017 specifies how to assign an object identifier to a data concept under the "its" arc of the international object identifier tree. | |
| ISO 14819-1:2013 describes the ALERT-C protocol concept and message structure used to achieve densely coded messages to be carried in the RDS-TMC feature. ISO 14819-2:2013 defines the Events List to... | |
| ISO 14819-1:2013 describes the ALERT-C protocol concept and message structure used to achieve densely coded messages to be carried in the RDS-TMC feature. | |
| ISO 14819-3:2013 sets out ways of specifying places and positions in traffic and travel information messages, including RDS-TMC messages (the Radio Data System - Traffic Message Channel). It primarily addresses... | |
| ISO 14819-6:2006 establishes a method of encrypting certain elements of the ALERT-C coded data carried in the RDS-TMC type 8A data group, such that without application by a terminal or... | |
| ISO 1481:2011 specifies the characteristics of slotted pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive. | |
| ISO 14825:2011 specifies the conceptual and logical data model and physical encoding formats for geographic databases for Intelligent Transport Systems (ITS) applications and services. It includes a specification of potential... | |
| ISO 14827-1:2005 allows different systems to exchange relevant data. The relevant data will be contained in end-application messages. Each end-application message will be formally defined as either a "subscription" or... | |
| ISO 14827-1:2005 defines the format that should be used to document those end-application messages that are to be exchanged between/among central systems. The format is protocol-independent to the extent practical. | |
| ISO 14829 specifies the calculations to be carried out to determine the stability of a straddle carrier. The stability calculations specified in this International Standard are intended to ensure that... | |
| ISO 1482:2011 specifies the characteristics of slotted countersunk (flat) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive. | |
| ISO 14835-1:2016 specifies a) the methods for measuring the finger skin temperature (FST), b) the procedures for conducting the measurements (including the performance of cold provocation tests), and c) how... | |
| ISO 14835-2:2005 specifies the methods for measuring finger systolic blood pressures (FSBP) with local cold provocation, the procedures for conducting the measurements, and how to report the measurement results. The... | |
| ISO 14837-1:2005 provides general guidance on ground-borne vibration generated by the operation of rail systems, and the resultant ground-borne noise in buildings. It lists the factors and parameters that need... | |
| ISO 14839-2:2004 sets out general guidelines for measuring and evaluating rotating machinery equipped with active magnetic bearings (AMBs) with respect to the following two indices: shaft vibratory displacement measured at... | |
| ISO 14839-3:2006 establishes the stability requirements of rotating machinery equipped with active magnetic bearings (AMB). It specifies a particular index to evaluate the stability margin and delineates the measurement of... | |
| ISO 14839-4:2012: a) indicates a typical architecture of an active magnetic bearing (AMB) system so that users can understand which components are likely to comprise such systems and which functions... | |
| ISO 1483:2011 specifies the characteristics of slotted raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive. | |
| ISO 14853:2016 specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in ISO 14853 do not necessarily correspond to the... | |
| ISO 14855-1:2012 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon... | |
| ISO 14857:2014 specifies the equipment and procedures to determine the air permeance of building materials at various pressure differentials and then assigning an air permeance rate at a reference pressure... | |
| ISO 14861:2015 specifies requirements for systems that are used to produce, from digital data, images on electronic displays that are intended to simulate a characterized printing condition defined by a... | |
| ISO 14869-2:2002 specifies a method for the dissolution of total contents for the following elements in soils: Na, K, Mg, Ca, Ti, Mn, Fe, Al, Si This list is not... | |
| ISO 14869-3:2017 specifies a method for microwave-assisted dissolution of soil samples for determination of total element contents of Al, As, Ba, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K,... | |
| ISO 14878:2015 lays down the technical specifications, such as the sound pressure level and the durability, and specifies the corresponding test method for audible warning devices (AWD) which may be... | |
| ISO 14880-1:2016 defines terms for microlens arrays. It applies to microlens arrays which consist of arrays of very small lenses formed inside or on one or more surfaces of a... | |
| ISO 14880-2:2006 specifies methods for testing wavefront aberrations for microlenses within microlens arrays. It is applicable to microlens arrays with very small lenses formed inside or on one or more... | |
| ISO 14880-3:2006 specifies methods for testing optical properties, other than wavefront aberrations, of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one... | |
| ISO 14880-4:2006 specifies methods for testing geometrical properties of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one or more surfaces of... | |
| ISO 14884:2015 specifies technical requirements for weathertight hinged, sliding, and pantograph doors for manual and powered operation providing access to accommodation and service areas on large yachts, taking into account... | |
| ISO 14885:2014 specifies the safety requirements for diesel engines with a rated power of 100kW and over for propulsion and essential auxiliaries for power generation for large yachts 24 m... | |
| ISO 14886:2014 applies to the structural fire protection of large FRP yachts of 24 m in length and over, and carrying up to 12 passengers. ISO 14886:2014 is not applicable... | |
| ISO 14889:2013 specifies fundamental requirements for uncut finished spectacle lenses. It is not applicable to protective spectacle lenses. ISO 14889:2013 takes precedence over the corresponding requirements of other standards, if... | |
| ISO 14890:2013 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers. ISO 14890:2013 is not suitable or valid... | |
| ISO 14891 IDF 185:2002 specifies a routine method for the determination of the total nitrogen content of milk and milk products. | |
| ISO 14892 IDF 177:2002 specifies a method for the determination of vitamin D in a test sample containing at least 10 µg of vitamin D per 100 g [equal to... | |
| ISO 14895:2016 specifies the design, construction and installation of permanently installed galley stoves and heating appliances using fuels which are liquid at atmospheric pressure on small craft up to 24... | |
| ISO 14896:2009 specifies two methods for the measurement of the isocyanate content of aromatic isocyanates used as polyurethane raw materials. Method A is primarily applicable to refined toluene diisocyanate (TDI),... | |
| ISO 14897 specifies methods used to measure the water content of polyols employed as polyurethane raw materials. Method A is a manual amperometric method which has been included to better... | |
| ISO 14900:2017 specifies two methods for the measurement of the hydroxyl number of polyols used as polyurethane raw materials. It is necessary to know the hydroxyl content of polyols to... | |
| ISO 14903:2017 provides the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described... | |
| ISO 14906:2011 specifies the application interface in the context of electronic fee collection (EFC) systems using the dedicated short-range communication (DSRC). | |
| ISO 14912:2003 defines the following quantities commonly used to express the composition of gas mixtures: mole fraction, mass fraction and volume fraction, as well as mole concentration, mass concentration and... | |
| ISO 14915-2:2003 provides recommendations and requirements for the design of multimedia user interfaces with respect to the following aspects: design of the organization of the content, navigation and media-control issues. | |
| ISO 14916:2017 specifies the procedure to determine the tensile adhesive strength of thermally sprayed coatings under tension in the direction normal to the surface of the coating by applying a... | |
| ISO 14917:2017 defines processes and general terms for thermal spraying. It classifies thermal spraying processes according to type of spray material, to type of operation and to type of energy... | |
| ISO 14918:2018 specifies procedural instructions for qualification testing of thermal sprayers. It defines requirements, ranges of qualification, test conditions, acceptance requirements and certification for qualification testing of thermal spray performance. | |
| ISO 14919:2015 specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying. | |
| ISO 14920:2015 defines the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion bonded coating. | |
| ISO 14921:2010 specifies the general procedure, when a thermally sprayed coating is applied to enhance the surface properties of a component or to reclaim worn and non-conforming parts. ISO 14921:2010... | |
| ISO 14923:2003 specifies an overview of the characteristics of coatings produced by thermal spraying. It is not possible in ISO 14923:2003 to go into details regarding the different types of... | |
| ISO 14924:2005 specifies the treatment and finishing of thermally sprayed coatings. It is applicable to different types of mechanical post treatment, chemical treatment, and thermal treatment, including chip cutting and... | |
| ISO 14930:2012 specifies the requirements, sampling and methods of testing for chrome and chrome-alum tanned leather used for the manufacture of dress gloves. ISO 14930:2012 does not apply to chamois... | |
| ISO 14931:2015 gives recommended values and related test methods for apparel leather excluding furs. It also specifies the sampling and conditioning procedures of laboratory samples. | |
| ISO 14932:2012 specifies four methods for the determination of the content of the following groups of organic peroxides used as rubber vulcanizing agents. There are three titration methods and one... | |
| ISO 14934-1:2010 specifies the terms and definitions for the calibration and use of heat flux meters. It also describes the relationship between output voltage and total heat flux, and gives... | |
| ISO 14934-2:2013 describes three methods for calibration of total hemispherical radiometers and total heat flux meters that are exposed to a well-defined radiation from a radiant heat source. The equipment... | |
| ISO 14934-4:2014 provides guidance on the use of heat flux meters in fire testing applications, including the description and working principles of common heat flux meters and methods for their... | |
| ISO 14937:2009 specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process for medical devices. It... | |
| ISO 14943:2004 provides criteria for the administration of nuclear criticality safety-related activities for operations which take place outside of reactors and for which there exists a potential for criticality accidents. | |
| ISO 14945:2004 establishes requirements for the uniform display of information to be exhibited on the builder's plate of small craft with a hull length LH of up to 24... | |
| ISO 14950:2003 defines the essential properties pertaining to the operation of unmanned spacecraft and defines requirements and guidelines for spacecraft on-board functions in order to enable a specified ground segment... | |
| ISO 14952-1:2003 defines the basic terms for use in cleaning processes for equipment and components used in space fluid systems. It is applicable to terms used in the description of... | |
| ISO 14952-2:2003 defines the cleanliness levels used in the cleaning, analysis, and verification procedures for space fluid systems. It establishes a common nomenclature for use in describing cleanliness levels for... | |
| ISO 14952-3:2003 provides sampling and analytical test methods to validate the cleanliness levels of parts and components that have been precision cleaned, and identifies processes that may be used for... | |
| ISO 14952-4:2003 provides requirements related to rough-cleaning processes used to prepare parts and components for precision cleaning. It identifies precleaning processes that can be used for ground support equipment, launch... | |
| ISO 14952-5:2003 provides guidance related to processes used to dry parts and components that have been subjected to solvent-based or water-based cleaning processes, and identifies drying processes that can be... | |
| ISO 14952-6:2003 specifies precision-cleaning processes for parts, components and systems used in flight-critical fluid applications. It can be used on equipment for ground support equipment, launch vehicles and spacecraft. ISO... | |
| ISO 14954:2005 normalizes the exchange of mathematical models between spacecraft contractors (SCC) and launch service providers (LSP). It identifies standard methods for modelling the dynamic behaviour of both launch vehicles... | |
| ISO 14955-1:2017 constitutes the application of eco-design standards to machine tools, mainly for automatically operated and/or numerically controlled (NC) machine tools. ISO 14955-1:2017 addresses the energy efficiency of machine tools... | |
| ISO 1496-1:2013 specifies the basic specifications and testing requirements for ISO series 1 freight containers of the totally enclosed general purpose types and certain specific purpose types (closed, vented, ventilated... | |
| ISO 14960-1:2014specifie s test methods for snap-in tubeless tyre valves intended for, but are not limited to, highway applications. | |
| ISO 14960-2:2014 establishes minimum specifications for clamp-in tubeless tire valves. A clamp-in valve is an assembly of a valve stem, valve core, valve cap, rubber grommet or O-ring, hex nut,... | |
| ISO 14961:2002 specifies the requirements for a parameter value language (PVL) specification for space data and information transfer systems. It establishes a standard keyword value type language for naming and... | |
| ISO 14963:2003 provides guidelines for dynamic tests and investigations on bridges and viaducts. It classifies the testing as a function of construction and usage, indicates the types of investigation and... | |
| ISO 14966:2002 specifies a method using scanning electron microscopy for determination of the concentration of inorganic fibrous particles in the air. The method specifies the use of gold-coated, capillary-pore, track-etched... | |
| ISO 14971:2007 specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks,... | |
| ISO 14990-1:2016 specifies general safety requirements for the electrical equipment and its components incorporated into earth-moving machines (EMMs) as defined in ISO 6165, and addresses the safety of operators, technicians,... | |
| ISO 14990-2:2016 the particular safety requirements for the electrical equipment and its components incorporated in externally-powered (mains-connected, including machines powered by external dedicated generators), electrically-driven earth-moving machines (EMMs). It is... | |
| ISO 14990-3:2016 specifies the particular safety requirements for the electrical equipment and its components incorporated in self-powered (utilizing on-board electric power sources) electrically-driven earth-moving machines (EMMs). It is applicable to... | |
| ISO 14997:2017 specifies the physical principles and practical means for the implementation of methods for evaluating surface imperfections. For imperfections specified using the visibility method, two inspection methods are described. | |
| ISO 14998:2013 provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. ISO 14998:2013 provides requirements for the functional specification and... | |
| ISO 14999-4:2015 applies to the interpretation of interferometric data relating to the measurement of optical elements. ISO 14999-4:2015 gives definitions of the optical functions and values specified in the preparation... | |
| ISO 15000-5:2014 describes and specifies the Core Component solution as a methodology for developing a common set of semantic building blocks that represent general types of business data, and provides... | |
| ISO 15001:2010 specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications, which can come into contact with oxygen in normal condition or in... | |
| ISO 15002:2008 is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical... | |
| ISO 15003:2006 provides design requirements and guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and... | |
| ISO 15004-1:2006 specifies fundamental requirements for non-invasive, active and non-active ophthalmic instruments. ISO 15004-1:2006 is also applicable to low-vision aids and tonometers, but not to other ophthalmic instruments which are... | |
| ISO 15004-2:2007 specifies fundamental requirements for optical radiation safety for ophthalmic instruments and is applicable to all ophthalmic instruments that direct optical radiation into or at the eye and for... | |
| ISO 15005:2017 specifies ergonomic principles for the design of the dialogues that take place between the driver of a road vehicle and the vehicle's transport information and control systems (TICS)... | |
| ISO 15007-1:2014 defines key terms and parameters applied in the analysis of driver visual behaviour focused on glance and glance-related measures. These terms and parameters can be applied in environments... | |
| ISO 15008:2017 specifies minimum requirements for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a passenger car by on-board transport information... | |
| ISO 15009:2016 specifies a method for quantitative gas-chromatographic determination of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons in soil. This International Standard is applicable to all types of soil. | |
| ISO 15011-1:2009 defines a laboratory method for measuring the emission rate of fume from arc welding. It also defines a method of collecting the fume for subsequent analysis and refers... | |
| ISO 15011-2:2009 defines laboratory methods for measuring the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) generated during... | |
| ISO 15011-3:2009 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate... | |
| ISO 15011-4:2017 covers health and safety in welding and allied processes. It specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare... | |
| ISO 15011-5:2011 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening metal treated with coatings composed wholly or partly of organic substances,... | |
| ISO 15012-1:2013 specifies a method for testing equipment for the separation of welding fume in order to determine whether its separation efficiency meets specified requirements. The method specified does not... | |
| ISO 15012-2:2008 specifies a method for establishing the minimum air volume flow rate required for captor hoods and nozzles to effectively capture fume and gases from welding and allied processes. | |
| ISO 15012-4:2016 defines the general requirements for ventilation equipment used to control exposure to fumes generated by welding and allied processes. It applies to the design and manufacture of all... | |
| ISO 15013:2007 specifies the requirements and test methods for solid flat extruded sheets of polypropylene homopolymers (PP‑H) and polypropylene copolymers (PP‑B and PP‑R) without fillers or reinforcing materials. The standard... | |
| ISO 15014:2007 specifies the requirements and test methods for solid flat extruded sheets of poly(vinylidene fluoride) homopolymers and poly(vinylidene fluoride) copolymers without fillers or reinforcing materials. The standard also applies... | |
| ISO 15015:2011 specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styren e copolymer materials: acrylonitrile-butadi ene-styrene (ABS), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) (commonly known as AES)... | |
| ISO 1501:2009 specifies the profiles, diameter-pitch combinations, basic dimensions, tolerances, limits of size and designation for ISO miniature screw threads with nominal diameters from 0,3 mm to 1,4 mm. These... | |
| ISO 15023-1:2017 establishes a system of designation for poly(vinyl alcohol) (PVAL) materials which may be used as the basis for specifications. The types of poly(vinyl alcohol) (PVAL) materials are differentiated... | |
| ISO 15023-2:2003 specifies the methods to be used in determining the properties of poly(vinyl alcohol), which is normally prepared by hydrolysis of poly(vinyl acetate) and whose composition comprises vinyl alcohol... | |
| ISO 15025:2016 specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of vertically oriented flexible materials in the form of single or multicomponent fabrics (coated, quilted,... | |
| ISO 15027-1:2012 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water... | |
| ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold... | |
| ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits. Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for... | |
| ISO 15028:2014 specifies a method for the determination of the hydrolysable-chlorin e content of toluene-2,4-diisocya nate, toluene-2,6-diisocya nate or mixtures of the two. This test method may also be applied... | |
| ISO 15029-2:2018 specifies a method by which the fire hazards of pressurised sprays of fire-resistant fluids can be compared. Two sizes of propane flame are used to ignite and stabilise... | |
| ISO 15031-1:2010 gives an overview of the structure and the partitioning of ISO 15031 (Road vehicles — Communication between vehicle and external test equipment for emissions-related diagnostics), and shows the... | |
| ISO 15031-2:2010 provides guidance on the usage of terms, definitions, abbreviations and acronyms used in emissions-related diagnostics, with respect to the communication between road vehicles and external equipment used in... | |
| ISO 15031-3:2016 references the latest publication of SAE J1962. On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information... | |
| ISO 15031-4:2014 specifies a set of standard diagnostic services to be provided by vehicles (OBD services). ISO 15031-4:2014 specifies a complementary set of facilities, to be provided by external test... | |
| ISO 15031-5:2015 is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe and any other region that may adopt similar requirements... | |
| ISO 15031-6:2015 provides uniformity for standardized diagnostic trouble codes (DTC) that electrical/electroni c On-Board Diagnostic (OBD) systems of motor vehicles are required to report when malfunctions are detected. It further... | |
| ISO 15031-7:2013 gives guidelines for the protection of road vehicle modules from unauthorized intrusion through a vehicle diagnostic data link. These security measures offer vehicle manufacturers the flexibility to tailor... | |
| ISO 15037-1:2006 specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: variables, measuring equipment and... | |
| ISO 15037-2:2002 specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods carried out on heavy vehicles. These are commercial vehicles, combinations, buses... | |
| ISO 15039 specifies two methods for the determination of the percentage of size (coating) on the glass fibre that is soluble an acetone. These test methods are applicable to continuous... | |
| ISO 1503:2008 sets out design principles, procedures, requirements and recommendations for the spatial orientation and direction of movement of controls and displays used in tool machines, industrial robots, office machines,... | |
| ISO 15042:2017 specifies the performance testing, the standard conditions and the test methods for determining the capacity and efficiency ratings of air-cooled air conditioners and air-to-air heat pumps. ISO 15042:2017... | |
| ISO 15063:2011 specifies a method for the determination of hydroxyl numbers of polyols using NIR (near-infrared) spectroscopy. Definitions and calibration techniques are given. Procedures for selecting calibration materials and for... | |
| ISO 15064:2017 specifies methods for the measurement of toluene-2,6-diisocya nate in mixtures of the 2,4- and 2,6-isomers. Two methods based on infrared spectroscopy are used to give accurate results over... | |
| ISO 15065:2005 specifies the dimensions and designation of countersinks for countersunk head screws with a head configuration in accordance with ISO 7721. It is applicable to the types of screws... | |
| ISO 15071:2011 specifies the characteristics of hexagon bolts with flange, small series, of product grade A, with threads from M5 up to and including M16, and property classes 8.8, 9.8,... | |
| ISO 15072:2012 specifies the characteristics of hexagon bolts with flange with metric fine pitch thread, small series, with product grade A, and with nominal thread diameters from 8 mm up... | |
| ISO 15075:2003 specifies message content and format utilized by in-vehicle navigation systems. Its emphasis is on messages that are required to generate or enhance routing instructions. There is a particular... | |
| ISO 15076-1:2010 specifies a colour profile format and describes the architecture within which it can operate. This architecture supports the exchange of information which specifies the intended colour image processing... | |
| ISO 15077:2008 specifies the preferred method of operation and requirements related to operator controls actuated by hand and foot, installed in agricultural tractors and self‑propelled agricultural machinery and used by... | |
| ISO 15081:2011 establishes graphical symbols for use on drawings and diagrams relating to the installation of pressurized agricultural irrigation systems. | |
| ISO 15082:2016 specifies commonly used test methods relating to the safety requirements for rigid plastic safety glazing materials in a road vehicle, regardless of the type of plastic of which... | |
| ISO 15083:2003 specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a hull length up to 24 m according to... | |
| ISO 15084:2003 specifies requirements for strong points for attaching chains, cables and lines for anchoring, mooring and towing small craft. It does not specify the requirement for the strong point... | |
| ISO 15085:2003 specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate... | |
| ISO 15086-3:2008 describes the procedure for the determination of the impedance characteristics of hydraulic components, by means of measurements from pressure transducers mounted in a pipe. ISO 15086-3:2008 is applicable... | |
| ISO 15088:2007 specifies a method for the determination of degrees of dilution or concentrations as a measure of the acute toxic effect of waste water to fish eggs within 48... | |
| ISO 15091:2012 specifies a method for determining the electrical conductivity and the electrical resistance of coating materials. The conductivity is usually measured for water-borne paints and varnishes, including electrodeposition coating... | |
| ISO 15093:2015 specifies an analytical procedure for the determination of either platinum in platinum jewellery alloys, gold in gold jewellery alloys, or palladium in palladium jewellery alloys, with a nominal... | |
| ISO 15096:2014 specifies the analytical procedure for the determination of silver with a nominal content of at least 999 ? (parts per thousand) by measuring specific elements listed in Table... | |
| ISO 15099:2003 specifies detailed calculation procedures for determining the thermal and optical transmission properties (e.g., thermal transmittance, total solar energy transmittance) of window and door systems based on the most... | |
| ISO 15105-1:2007 specifies two methods for determining the gas transmission rate of single-layer plastic film or sheet and multi-layer structures under a differential pressure. One method uses a pressure sensor,... | |
| ISO 15105-2:2003 specifies a method for the determination of the gas-transmission rate of any plastic material in the form of film, sheeting, laminate, co-extruded material or flexible plastic-coated material. Specific... | |
| ISO 15106-3:2003 specifies an instrumental method for determining the water vapour transmission rate of plastic film, plastic sheeting and multi-layer structures including plastics, using an electrolytic detection sensor. NOTE The... | |
| ISO 15106-4:2008 specifies an instrumental method for determining the water vapour transmission rate of single-layer plastic film and sheet, as well as multi-layer structures including plastics, using a gas chromatograph. | |
| ISO 15106-5:2015 specifies a method for determining the water vapour transmission rate of plastic film, plastic sheeting, and multi-layer structures including plastics, using a pressure sensor. | |
| ISO 15106-6:2015 specifies a method for determining the water vapour transmission rate of plastic film, plastic sheeting, and multi-layer structures including plastics, using an atmospheric pressure ionization mass spectrometric detection... | |
| ISO 15106-7:2015 specifies a method for determining the water vapour transmission rate of plastic film, plastic sheeting, and multi-layer structures including plastics based on measurements of calcium degradation due to... | |
| ISO 15110:2017 specifies a so-called acid dew and fog test (ADF test) as an accelerated laboratory test method for simulating, by the use of artificial acidic precipitation, the damaging effects... | |
| ISO 15113:2005 outlines the principles governing the measurement of coefficient of friction and describes a method suitable for measuring the coefficient of friction of a rubber against standard comparators, against... | |
| ISO 15114:2014 specifies a method for the determination of mode II shear load delamination resistance. GIIC, (critical energy release rate), of unidirectional fibre-reinforced plastic composites using the calibrated... | |
| ISO 15117-1:2003 sets out methods for the measurement of the flow properties of coal, primarily for the design of bins and chutes. It also provides some guidance on the presentation... | |
| ISO 15118 specifies the communication between Electric Vehicles (EV), including Battery Electric Vehicles and Plug-In Hybrid Electric Vehicles, and the Electric Vehicle Supply Equipment (EVSE). As the communication parts of... | |
| ISO 15118-2:2014 specifies the communication between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV) and the Electric Vehicle Supply Equipment. The application layer message set defined in ISO... | |
| ISO 15118-3:2015 specifies the requirements of the physical and data link layer for a high-level communication, directly between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV), termed as... | |
| ISO 15118-8:2018 specifies the requirements of the physical and data link layer of a wireless High Level Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment (EVSE). | |
| ISO 15136-2:2006 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface drive systems for use in the... | |
| ISO 15137:2005 specifies requirements and test methods for self-adhesive hanging devices (SAHD) used in combination with infusion containers, e.g. infusion glass bottles (see ISO 8536-1). The purpose of ISO 15137:2005... | |
| ISO 1513:2010 specifies both the procedure for preliminary examination of a single sample, as received for testing, and the procedure for preparing a test sample by blending and reduction of... | |
| ISO 15142-1:2003 specifies metallic medical devices used for the temporary intramedullary stabilization of long bones by surgical implantation, defining terms and giving requirements for intramedullary nails. It is applicable to... | |
| ISO 15142-2:2003 specifies metallic medical devices used for the temporary intramedullary stabilization of long bones by surgical implantation, classifying and giving requirements for the locking components of intramedullary nails. It... | |
| ISO 15142-3:2003 specifies metallic medical devices used for the temporary intramedullary stabilization of long bones by surgical implantation, classifying and giving other requirements and dimensions for the devices used to... | |
| ISO 15143-1:2010 specifies system architecture for the exchange of data related to the use of earth‑moving machinery, as defined in ISO 6165, and mobile road construction machinery, as defined in... | |
| ISO 15143-2:2010 specifies a data dictionary for the exchange of data in worksite data‑controlled construction operations as specified in ISO 15143-1. It also gives definitions of terms used in relation... | |
| ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions. | |
| ISO 1514:2016 specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints,... | |
| ISO 15152:2003 specifies a method for the determination of the content of total alkaloids as nicotine in tobacco by continuous-flow analysis. This method is applicable to manufactured and unmanufactured tobacco. | |
| ISO 15153:2003 specifies a method for the determination of the content of reducing substances in tobacco by continuous-flow analysis. This method is applicable to manufactured and unmanufactured tobacco. | |
| ISO 15154:2003 specifies a method for the determination of the content of reducing carbohydrates in tobacco by continuous-flow analysis. This method is applicable to manufactured and unmanufactured tobacco. | |
| ISO 15156-1:2015 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in... | |
| ISO 15156-2:2015 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas... | |
| ISO 15156-3:2015 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and... | |
| ISO 15158:2014 describes the procedure for determining the pitting potential for stainless steels (austenitic, ferritic/austenitic, ferritic, martensitic stainless steel) under potentiodynamic control. The principal advantage compared with other potentiostatic test... | |
| ISO 15163:2012 specifies a reference method for the determination of the amounts of chymosin and bovine pepsin present in a test sample of calf rennet and adult bovine rennet. In... | |
| ISO 15169:2003 gives guidance on the selection, installation, commissioning, calibration and verification of hybrid tank measurement systems (HTMS) for the measurement of level, static mass, observed and standard volume, and... | |
| ISO 15171-2:2016 specifies dimensions, performance requirements, and test procedures for diagnostic couplings with an M16 × 2 connection end that can be connected under pressure without tools to a maximum... | |
| ISO 15172:2005 specifies a test method to evaluate the strength of the nut seat of wheels intended for use on passenger cars, light trucks and multi-purpose vehicles. While this test... | |
| ISO 15174:2012 specifies a method for comparison of the total milk-clotting activity of a microbial coagulant sample with the milk-clotting activity of an international microbial coagulant reference standard on a... | |
| ISO 15176:2002 provides guidance on the range of tests that may be necessary to characterize soil materials intended to be excavated and re-used with, or without, preliminary treatment. Soil materials... | |
| ISO 1518-1:2011 specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by... | |
| ISO 1518-2:2011 specifies a method for determining, using a pointed stylus loaded with a continuously increasing load, the scratch resistance of a single coating of a paint, varnish or related... | |
| ISO 15181-1:2007 specifies a general method for extracting biocides from antifouling paint films into artificial seawater under specified laboratory conditions. It is used in conjunction with the other parts of... | |
| ISO 15181-2:2007 specifies the apparatus and analytical method for determining the amount of copper (based) biocide that has been released from an antifouling paint into artificial seawater in accordance with... | |
| ISO 15181-3:2007 specifies the apparatus and analytical method for determining the amount of zineb that has been released from an antifouling paint into artificial seawater in accordance with the procedure... | |
| ISO 15181-4:2008 specifies the apparatus and analytical method for determining the amount of pyridine-triphenylbo rane (PTPB) that has been released from an antifouling paint into artificial seawater in accordance with... | |
| ISO 15181-5:2008 specifies the apparatus and analytical method for determining the amount of tolylfluanid and dichlofluanid that has been released from an antifouling paint into artificial seawater in accordance with... | |
| ISO 15181-6:2012 specifies a method for determining the amount of tralopyril that has been released from an antifouling paint into artificial seawater in accordance with the procedure given in ISO... | |
| ISO 15184:2012 specifies a method for determining the film hardness by pushing pencils of known hardness over the film. The test can be performed on a single coating of a... | |
| ISO 15186-2:2003 specifies a sound intensity method to determine the in-situ sound insulation of walls, floors, doors, windows and small building elements. It is intended for measurements that have to... | |
| ISO 15186-3:2002 specifies a sound intensity method to determine the sound reduction index and the element-normalized level difference of building elements at low frequencies. This method has significantly better reproducibility... | |
| ISO 15189:2012 (Revised 2014) specifies requirements for quality and competence in medical laboratories. ISO 15189:2012 can be used by medical laboratories in developing their quality management systems and assessing their... | |
| ISO 15190:2003 specifies requirements for safe practices in the medical laboratory. | |
| ISO 15192:2010 specifies a method for the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used... | |
| ISO 15193:2009 specifies requirements for the content of a reference measurement procedure for in vitro diagnostic medical devices and medical laboratories. ISO 15193:2009 applies to reference measurement procedures providing values... | |
| ISO 15194:2009 specifies requirements for certified reference materials and the content of their supporting documentation, in order for them to be considered of higher metrological order in accordance with ISO... | |
| ISO 15195:2003 gives the specific requirements for reference measurement laboratories in laboratory medicine. Examinations of properties with results reported on a nominal or ordinal scale are not included. ISO 15195:2003... | |
| ISO 15197:2013 specifies requirements for in vitro glucose monitoring systems that measure glucose concentrations in capillary blood samples, for specific design verification procedures and for the validation of performance by... | |
| ISO 1519:2011 specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate... | |
| ISO14823:2017 specifies a graphic data dictionary, a system of standardized codes for existing road traffic signs and pictograms used to deliver Traffic and Traveller Information (TTI). The coding system can... | |
| La présente Norme internationale se concentre sur la fonctionnalité des terminaux et traite des préhenseurs à pince tels que définis en 4.1.2.1. La présente Norme internationale donne des termes pour... | |
| La présente Norme internationale spécifie la terminologie et définit les termes relatifs aux types, aux caractéristiques fonctionnelles et à la géométrie des rivets aveugles. Elle spécifie également la terminologie pour... | |
| Scope This International Standard specifies the essential requirements of snowboard strap bindings for soft boots (see 3.1), hereafter referred to as snowboard bindings. This International Standard is applicable to snowboard... | |
| Specifies a method for the determination of the free fat content of meat and meat products by means of extraction. | |
| Specifies the basic specifications and testing requirements for containers of the dry bulk non-pressurized type which are suitable for international exchange and for conveyance by road, rail and sea. Annexes... | |
| Specifies the mating and clearance dimensions. The mating dimensions and characteristics of the ground half shall conform to those in figure 1 and table 1. The aircraft half shall mate... | |
| Specifies the requirements for circuit breakers having an inverse time/current characteristic, of normal ratings up to and including 35 A, for use in nominal 28 V d. c. and/or 115... | |
| The method consists in boiling of a test portion with hydrochloric acid to free the occluded and bound lipid fractions, filtrating of the resulting mass, drying, and extracting with n-hexane... | |
| The method is based on dissolving the coating on a surface of known area in inhibited acid and determination of the resultant loss in mass by weighing the sample before... | |
| The primary purpose of speed and power trials is to determine a ship's performance in terms of ship's speed, power and propeller shaft speed under prescribed ship's conditions and thereby... | |
| This International Standard specifies a method to determine if paints, varnishes, paint binders, solvents, petroleum or related products, when maintained at a selected equilibrium temperature and under the conditions of... | |
| This international Standard specifies the basic reference method for the determination of the water content of green coffee. This method is designed to serve as a standard for the checking... | |
| This International Standard specifies, for the field of air quality measurement procedures, the: estimation of measurement uncertainty from actual or claimed values of all important performance characteristics of a method... | |
| This part of ISO 14617 specifies graphical symbols for basic elements in actuators, complete actuators and actuating devices in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for components and devices used in measurement and control systems, represented in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for fluid power conversion units (such as pumps and motors) in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for functional connections, mechanical links, pipelines and related devices such as connection joints, ports, terminals, quick-release couplings and connectors, in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for heat transfer and heat engines in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for pumps, compressors and fans, used mainly for transportation, in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for the representation of devices for separating, purification and mixing in diagrams. | |
| This part of ISO 14617 specifies graphical symbols for valves and dampers in diagrams, including symbols for general-purpose valves, those used in fluid power systems and hygienic valves used in... | |
| This part of ISO 14617 specifies graphical symbols in diagrams for mechanical elements such as weights, springs, clutches and brakes, pipe and duct elements such as restrictors, nozzles and air... | |
| This part of ISO 14617 specifies graphical symbols of a general character, mainly for use in building-up complete symbols representing specific products and functions in diagrams. |
| << Prev | Next >> |