Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
570
580
590
600
610
620
625
626
627
628
629
630
631
632
633
634
635
636
637
640
650
660
670
680
690
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance | |
| Alarm systems - Guidelines to achieving compliance with EC directives for equipment of alarm systems | |
| Alarm systems - Terms and definitions | |
| Alcohol interlocks \x96 Test methods and performance requirements \x96 Part 3: Guidance for decision makers, purchasers and users | |
| Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler | |
| Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies | |
| Ambient air \x96 Determination of lung deposited surface area (LDSA) concentration using aerosol monitors based on diffusion charging | |
| Ambient air \x96 Determination of the concentration of levoglucosan \x96 Chromatographic method | |
| Ambient air \x96 Determination of the particle number concentration of atmospheric aerosol | |
| Ambient air \x96 Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) | |
| Ambient air \x96 Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter | |
| Ambient air \x96 Sampling and analysis of airborne pollen grains and fungal spores for allergy networks \x96 Volumetric Hirst method | |
| Amendment 2 \x96 Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 4-4: Uncertainties, statistics and limit modelling \x96 Statistics of complaints and a model for the... | |
| Amendment 2 \x96 Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 4-5: Uncertainties, statistics and limit modelling \x96 Conditions for the use of alternative test methods... | |
| Animal feeding stuffs \x96 Methods of sampling and analysis \x96 PFGE typing of Lactobacilli, Pediococci, Enterococci and Bacilli in animal feeds | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals | |
| Assessment and retrofitting of existing structures | |
| Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide | |
| Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide | |
| Assignment of safety integrity requirements \x96 Basic rationale | |
| BIM Properties for lighting \x96 Luminaires and sensing devices | |
| Bio-based solvents \x96 Requirements and test methods | |
| Biometric authentication for critical infrastructure access control \x96 Requirements and Evaluation | |
| Biometric data injection attack detection | |
| Bitumen and bituminous binders \x96 Determination of acid number of bitumen \x96 Potentiometric method | |
| Bitumen and bituminous binders \x96 Determination of salt content in bitumen \x96 Electrical conductivity method | |
| Brush-holders for slip-rings group R - Type RA | |
| Building hardware \x96 Master Key System data protection \x96 Guidance | |
| Business support - Support services provided to small enterprises - Terminology, quality and performance | |
| Cable management systems (CMS) providing support for cables with intrinsic fire resistance | |
| Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks | |
| Cable networks for television signals, sound signals and interactive services - Part 5-1: IP gateways and interfaces for headends | |
| Cable networks for television signals, sound signals and interactive services - System guidelines for analogue optical transmission systems | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 2-2: Interference issues for DVB-T reception in the presence of LTE base station signals | |
| Characterization of waste \x96 Determination of selected low boiling point alcohols using gas chromatography with flame ionization detection after static head-space extraction (HS-GC-FID) | |
| Characterization of waste \x96 Guidance on the determination of the content of elements and substances in waste | |
| Child care articles \x96 Tricycles \x96 Safety requirements and test methods | |
| Circular design of fishing gear and aquaculture equipment \x96 Terms and definitions | |
| Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables | |
| Collection, logistics & treatment requirements for WEEE \x96 Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614 | |
| Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) \x96 Determination of particle size of lignocellosic material | |
| Compost and digestate properties when used in fertilizing products | |
| Conditions for use of EN 419221-5 as a qualified electronic signature or seal creation device | |
| Conservation of cultural heritage \x96 General terms for describing the alterations of objects | |
| Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections | |
| Construction products \x96 Assessment of release of dangerous substances \x96 Determination of activity concentrations of radium-226, thorium-232 and potassium-40 in construction products using semiconductor gamma-ray spectrometry | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in digests and eluates \x96 Analysis by Inductively Coupled Plasma \x96 Mass Spectrometry (ICP-MS) | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in digests and eluates \x96 Analysis by Inductively Coupled Plasma \x96 Optical Emission Spectrometry (ICP-OES) | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in eluates | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of organic substances in eluates | |
| Construction products: Assessment of release of dangerous substances \x96 Content of inorganic substances \x96 Methods for analysis of aqua regia digests | |
| Construction products: Assessment of release of dangerous substances \x96 Content of organic substances \x96 Methods for extraction and analysis | |
| Construction products: Assessment of release of dangerous substances \x96 Determination of ecotoxicity of construction product eluates | |
| Construction products: Assessment of release of dangerous substances \x96 Digestion by aqua regia for subsequent analysis of inorganic substances | |
| Construction products: Assessment of release of dangerous substances \x96 Methods for the determination of N-nitrosamines in air samples derived by EN 16516 | |
| Construction products: Assessment of release of dangerous substances \x96 Sampling and quantitative determination of asbestos in construction products | |
| Cranes \x96 Loader cranes \x96 Interface between loader cranes and work platforms | |
| Crisis management \x96 Guidance for developing a strategic capability | |
| Cycles \x96 Electrically power assisted cycles \x96 Anti-tampering measures | |
| Definitions related to material efficiency | |
| Design guideline for mechanically fastened roof waterproofing systems | |
| Design of fastenings for use in concrete \x96 Part 4-1: General | |
| Design of fastenings for use in concrete \x96 Part 4-2: Headed Fasteners | |
| Design of fastenings for use in concrete \x96 Part 4-3: Anchor channels | |
| Design of fastenings for use in concrete \x96 Part 4-4: Post-installed fasteners \x96 Mechanical systems | |
| Design of fastenings for use in concrete \x96 Part 4-5: Post-installed fasteners \x96 Chemical systems | |
| Design of fibre-polymer composite structures | |
| Design of glass structures \x96 Part 1: Basis of design and materials | |
| Design of glass structures \x96 Part 2: Design of out-of-plane loaded glass components | |
| Design of glass structures \x96 Part 3: Design of in-plane loaded glass components and their mechanical joints | |
| Design of glass structures \x96 Part 4: Glass selection relating to the risk of human injury \x96 Guidance for specification | |
| Determination of cross-sectional area of conductors and selection of protective devices | |
| Determination of the acoustic properties of markings \x96 The CPX measurement method | |
| Digital Chain of Custody for CBRNE Evidence \x96 Part 1: Overview and Concepts | |
| Digital Chain of Custody for CBRNE Evidence \x96 Part 2: Data Management and Audit | |
| District heating pipes \x96 Factory made flexible pipe systems \x96 Classification, requirements and test methods for bonded or non-bonded system with thermoplastic reinforced service pipes (TRSP) | |
| Durability of wood and wood-based products \x96 Moisture dynamics of wood and wood-based products | |
| Earthworks \x96 Chemical tests \x96 Part 2: Determination of organic matter content by potassium permanganate method | |
| Earthworks \x96 Continuous Compaction Control (CCC) | |
| Earthworks \x96 Soil treatment tests \x96 Part 1: pH-test for determination of the lime requirement of soils for stabilization (Lime Fixation Point LFP, Lime Modification Optimum LMO) | |
| Earthworks \x96 Soil treatment tests \x96 Part 2: Test of evaluation of the aptitude of a dry material to emit dust | |
| Electric vehicle conductive charging system \x96 Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation \x96 Particular requirements for portable and mobile equipment | |
| Electric vehicle wireless power transfer (WPT) systems \x96 Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure(IEC/T S 61980-2:2019) | |
| Electric vehicle wireless power transfer (WPT) systems \x96 Part 3: Specific requirements for the magnetic field wireless power transfer systems | |
| Electric vehicles conductive charging system \x96 Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation \x96 General rules and requirements for stationary equipment | |
| Electric vehicles conductive charging system \x96 Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation \x96 General definitions and requirements for CANopen communication | |
| Electric vehicles conductive charging system \x96 Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation \x96 Pre-defined communication parameters and general application objects | |
| Electric vehicles conductive charging system \x96 Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation \x96 Voltage converter unit communication | |
| Electric vehicles conductive charging system \x96 Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation \x96 Battery system communication | |
| Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives | |
| Electrical installation guide \x96 Selection and erection of electrical equipment \x96 Wiring systems \x96 Limitation of temperature rise of connecting interfaces | |
| Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks | |
| Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz | |
| Electromagnetic characteristics of linear cable management systems (CMS) | |
| Electromagnetic compatibility - Emission measurements in fully anechoic chambers | |
| Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr. f5.(2013)43164 to the ESOs | |
| Electronic fee collection \x96 Evaluation of implementation for conformity to CEN/TS 16986 \x96 Part 1: Test suite structure and purposes | |
| Electronic fee collection \x96 Evaluation of implementation for conformity to CEN/TS 16986 \x96 Part 2: Abstract test suite | |
| Electronic Fee Collection \x96 Interoperable application profiles for information exchange between Service Provision and Toll Charging | |
| Electronic invoicing \x96 Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice Access to this CEN and DS technical publication has been sponsored by the... | |
| Electronic invoicing \x96 Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note | |
| Electronic invoicing \x96 Part 3-3: Syntax binding for UN/CEFACT XML Industry Invoice D16B | |
| Electronic invoicing \x96 Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B | |
| Electronic invoicing \x96 Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications | |
| Electronic invoicing \x96 Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice | |
| Electronic Public Procurement \x96 Architecture \x96 Part 3: Customisation Guideline | |
| Electrostatics - Code of practice for the avoidance of hazards due to static electricity | |
| Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide | |
| Energy Efficiency Obligation Schemes in Europe - Overview and analysis of main features and possibilities for harmonisation | |
| Environmental characterization of leachates from waste and soil using reproductive and toxicological gene expression in Daphnia magna | |
| Environmental influence testing methodology for operational deployments of European ABC systems | |
| Environmental statement specific to TC 20 - Electric cables | |
| Eurocode 3: Design of steel structures \x96 Part 1-101: Alternative interaction method for members in bending and compression | |
| Eurocode 4 \x96 Design of composite steel and concrete structures \x96 Part 1-101: Double and single skin steel concrete composite (SC) structures | |
| Eurocode 5: Design of Timber Structures \x96 Structural design of timber-concrete composite structures \x96 Common rules and rules for buildings | |
| European character repertoires and their coding - 8-bit single-byte coding | |
| European Professional Ethics Framework for the ICT Profession (EU ICT Ethics) | |
| Evaluation of electromagnetic fields around power transformers | |
| Explosive atmospheres - Part 33: Equipment protection by special protection 's' | |
| Explosive atmospheres \x96 Part 32-1: Electrostatic Hazards \x96 Guidance | |
| Explosive atmospheres \x96 Part 39: Intrinsically safe systems with electronically controlled spark duration limitation | |
| Explosive atmospheres \x96 Part 43: Equipment in adverse service conditions | |
| Explosive atmospheres \x96 Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE) | |
| External fire exposure to roofs in combination with photovoltaic (PV) arrays \x96 Test method(s) | |
| Fertilizers \x96 Determination of cold water insoluble nitrogen and hot water insoluble nitrogen in solid urea formaldehyde and methylene urea slow-release fertilizers and determination of the solubility of nutrient polymers... | |
| Fertilizers \x96 Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline | |
| Fertilizers and liming materials \x96 Determination of the chloride content by potentiometric titration | |
| Fertilizing products \x96 Determination of the stability of fertilizing products containing micronutrient chelates at different pHs | |
| Fertilizing products \x96 Determination of the stability of fertilizing products containing micronutrient complexes | |
| Fertilizing products \x96 Stability of chelating and complexing agents | |
| Fibre optic access to end-user \x96 A guideline to building of FTTX fibre optic network | |
| Field device tool (FDT) interface specification \x96 Part 51-150: Communication implementation for common object model \x96 IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification \x96 Part 52-31: Communication implementation for common language infrastructure \x96 IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification \x96 Part 52-32: Communication implementation for common language infrastructure \x96 IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification \x96 Part 52-90: Communication implementation for common language infrastructure \x96 IEC 61784 CPF 9 | |
| Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems | |
| Fire detection and fire alarm systems \x96 Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance | |
| Fire extinguishing systems in commercial kitchens \x96 System design, documentation, and test requirements \x96 Fire test procedures for plenum and ducts | |
| Fixed firefighting systems \x96 Automatic sprinkler systems \x96 Guidance for earthquake bracing | |
| Flexible sheets for waterproofing \x96 Extrapolation rules for testing results on resistance to root penetration | |
| Flexible sheets for waterproofing \x96 Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete \x96 Definitions and characteristics | |
| Foods of plant origin \x96 Multimethod for the determination of pesticide residues in vegetable oils by LC-MS/MS | |
| Foodstuff \x96 Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt) | |
| Foodstuffs \x96 DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Foodstuffs \x96 General guidelines for the validation of qualitative real-time PCR methods \x96 Part 1: Single-laboratory validation | |
| Foodstuffs \x96 General guidelines for the validation of qualitative real-time PCR methods \x96 Part 2: Collaborative study | |
| Foodstuffs \x96 Guidelines for the calibration and quantitative determination of pesticide residues and organic contaminants using chromatographic methods | |
| Foodstuffs \x96 Methods of analysis for the detection of genetically modified organisms and derived products \x96 Polymerase chain reaction (PCR) based screening strategies | |
| Full body photography | |
| Function blocks (FB) for process control \x96 Part 4: EDD interoperability guideline | |
| Functional requirements for the electronic archiving services | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 0: Functional safety for the process industry and IEC 61511 | |
| Functional safety \x96 Safety instrumented systems for the process industry sector \x96 Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems \x96 Part 0: Functional safety and IEC 61508 | |
| Gas infrastructure - Quality of gas - Hydrogen used in rededicated gas systems | |
| General principles and requirements for testing of quality and nicotine levels of electronic cigarette liquids | |
| General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-3: HBES installations - Assessment and definition of levels | |
| Geosynthetics \x96 Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products | |
| Growing media \x96 Determination of specific parameters | |
| Guidance on how to conduct Round Robin Tests | |
| Guidance on how to implement EN ISO 19650-series in Europe, in particular parts 1, 2, 3, 4 and 5. | |
| Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery | |
| Guide for the application of aluminium electrolytic capacitors | |
| Guide for the application of the European Standard EN 50160 | |
| Guide on EMC standardization for product committees | |
| Guide to EMC Directive conformity of equipment designed for military purposes | |
| Guide to levels of competence required in laser safety | |
| Guideline for the validation of physico-chemical analytical methods | |
| Guidelines for developing ICT Professional Curricula as scoped by EN 16234-1 (e-CF) | |
| Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields | |
| Guidelines for Safety Related Risk Assessment and Risk Reduction for Low Voltage Equipment | |
| Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs | |
| Guidelines for the use of EN 45545-2 for Ni-Cd batteries on board rolling stock | |
| Guidelines for the verification of household appliances under energy labelling and eco design | |
| Health informatics \x96 The International Patient Summary \x96 Guideline for European Implementation | |
| Helmets for S-EPAC riders | |
| High-voltage switchgear and controlgear \x96 Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1... | |
| Home and Building Electronic Systems (HBES) - Open communication system - Interfaces - Medium interface, twisted pair, class 1 | |
| Home and Building Electronic Systems (HBES) - Technical Report 5: Application requirements and market demands for infra-red in the context of HBES | |
| Hydrometry \x96 Sedimentation \x96 Measurements required for effective sediment management and control at river structures | |
| In vitro diagnostic Next Generation Sequencing (NGS) workflows \x96 Part 1: Human DNA examination | |
| In vitro diagnostic Next Generation Sequencing (NGS) workflows \x96 Part 2: Human RNA examination | |
| Industrial communication networks \x96 Fieldbus specifications \x96 Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Industrial-process measurement, control and automation \x96 Framework for functional safety and security | |
| Information concerning plugs for household appliances covered by CLC/TC 61 used in the various CENELEC countries | |
| Information technology - Cabling installation - Part 99-1: Remote powering | |
| Information technology - Generic cabling systems - Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications | |
| Information technology \x96 Cabling installation \x96 Part 99-2: Mitigation and protection from electrical interference | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 99-1: Recommended practices for energy management | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 99-2: Recommended practices for environmental sustainability | |
| Information technology \x96 Data centre facilities and infrastructures \x96 Part 99-3: Guidance to the application of EN 50600 series | |
| Information technology \x96 Implementation of BCT applications using cabling in accordance with EN 50173-4 | |
| Information technology \x96 Telecommunications cabling requirements for remote powering of terminal equipment | |
| Inorganic fertilizers \x96 Determination of chelating and complexing agents | |
| Inorganic fertilizers \x96 Determination of particle size of ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers \x96 Determination of pH of a solution of ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers \x96 Determination of specific contaminants | |
| Inorganic fertilizers \x96 Determination of specific inhibitors | |
| Inorganic fertilizers \x96 Determination of specific micronutrients | |
| Inorganic fertilizers \x96 Determination of specific nutrients | |
| Inorganic fertilizers \x96 Determination of specific parameters in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers \x96 Determination of specific parameters | |
| Inorganic fertilizers \x96 Determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic fertilizers \x96 Determination of the copper content in ammonium nitrate fertilizers of high nitrogen content | |
| Inorganic micronutrient fertilizers \x96 Determination of the chelated micronutrient content and the chelated fraction of micronutrients \x96 Part 1: Treatment with a cation exchange resin | |
| Inorganic micronutrient fertilizers \x96 Determination of the chelated micronutrient content and the chelated fraction of micronutrients \x96 Part 2: Determination of EDTA, DTPA, HEEDTA, IDHA or EDDS | |
| Inorganic micronutrient fertilizers \x96 Determination of the concentration of free, chelated or complexed micronutrients and the chelating and/or complexing agents present in compound inorganic micronutrient fertilizers | |
| Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards | |
| Intelligent transport systems \x96 ECall optional additional data \x96 Linked mobile phone number data concept | |
| Intelligent transport systems \x96 ESafety \x96 ECall end to end conformance testing for IMS packet switched based systems | |
| Intelligent transport systems \x96 eSafety \x96 eCall for automated and autonomous vehicles | |
| Intelligent transport systems \x96 eSafety \x96 eCall High level application Protocols (HLAP) using IMS packet switched networks | |
| Intelligent Transport Systems \x96 eSafety \x96 eCall Interface for PSAPs to access cargo and dangerous goods databases | |
| Intelligent transport systems \x96 eSafety \x96 eCall via an ITS-station | |
| Intelligent transport systems \x96 eSafety \x96 eCall via satellite | |
| Intelligent transport systems \x96 eSafety \x96 Incident Support Information System (ISIS) Architecture | |
| Intelligent transport systems \x96 ESafety \x96 Interoperability and user choice in eCall aftermarket and third party eCall services | |
| Intelligent transport systems \x96 eSafety \x96 Part 2 : eCall for HGVs and other commercial vehicles | |
| Intelligent transport systems \x96 eSafety \x96 Part 4: eCall for UNECE Category T, R, S agricultural/forestr y vehicles | |
| Intelligent transport systems \x96 eSafety \x96 Part 5: eCall for UNECE Category L1 and L3 powered two-wheeled vehicles | |
| Intelligent transport systems \x96 eSafety \x96 Part 6: eCall for UNECE Category L2, L4, L5, L6 and L7 tricycles and quadricycles | |
| Intelligent Transport Systems \x96 eSafety \x96 ProForma eCall Agreement between TPSP and PARES | |
| Intelligent transport systems \x96 ITS spatial data \x96 Data exchange on changes in road attributes | |
| Intelligent transport systems \x96 Location Referencing Harmonisation for Urban-ITS \x96 Part 2: Transformation methods | |
| Intelligent transport systems \x96 Public transport \x96 Open API for distributed journey planning | |
| Intelligent transport systems \x96 Traffic management systems \x96 Status, fault and quality requirements | |
| Intelligent transport systems \x96 Urban ITS \x96 Air quality management in urban areas | |
| Intelligent transport systems \x96 Urban ITS \x96 Communication interfaces and profiles for traffic management | |
| Intelligent transport systems \x96 Urban ITS \x96 Mixed vendor environments, methodologies & translators | |
| Intelligent transport systems \x96 Urban ITS \x96 Models and definitions for new modes | |
| Intelligent transport systems \x96 Urban ITS \x96 Use of regional traffic standards in a mixed vendor environment | |
| Intelligent transport systems \x96 Urban-ITS \x96 'Controlled Zone' management for UVARs using C-ITS | |
| Interruption indexes | |
| Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz | |
| Laboratory installations \x96 Ventilation systems in laboratories | |
| Light and lighting \x96 Commissioning of lighting systems in buildings | |
| Light and lighting \x96 Lighting system design process | |
| Lightning protection systems - Symbols | |
| Liming materials \x96 Determination of the lime requirement in soil \x96 Ammonium acetate buffer method pH 5,5 | |
| List of interpretations on published standards on "Alarm Systems" | |
| List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use" | |
| Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses | |
| Low-voltage switchgear and controlgear \x96 Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies | |
| Low-voltage switchgear and controlgear \x96 Guidance for the development of embedded software | |
| LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards | |
| LPG equipment and accessories \x96 Terminology | |
| Management of observed hydrometric data \x96 Guidance | |
| Material derived from End-of-Life tyres \x96 Granulates and powders \x96 Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution | |
| Material efficiency \x96 Household and similar electrical appliances \x96 Assessment of applicability of EN 4555X | |
| Materials obtained from end of life tyres (ELT) \x96 Sampling method for granulates and powders stored in big-bags | |
| Materials obtained from End of Life Tyres \x96 Determination of specific requirements for sampling and determination of moisture content using the oven-dry method | |
| Materials obtained from end-of-life tyres \x96 Determination of the specific surface area of powders \x96 Method based on krypton adsorption | |
| Materials obtained from end-of-life tyres \x96 Quality criteria for the selection of whole tyres, for recovery and recycling processes | |
| Materials produced from end of life tyres \x96 Steel wire \x96 Determination of the non-metallic content | |
| Method for condition assessment of immobile constructed assets | |
| Methods of test for masonry units \x96 Part 22: Determination of freeze/thaw resistance of clay masonry units | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood \x96 Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood \x96 Part 2: Isolated DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for circulating tumor cells (CTCs) in venous whole blood \x96 Part 3: Preparations for analytical CTC staining | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood \x96 DNA, RNA and proteins | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for FFPE tissue \x96 Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) \x96 Part 1: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) \x96 Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) \x96 Part 3: Isolated genomic DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for human specimen \x96 Isolated microbiome DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for saliva \x96 Isolated human DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for snap frozen tissue \x96 Part 1: Isolated RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for snap frozen tissue \x96 Part 2: Isolated proteins | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for snap frozen tissue \x96 Part 3: Isolated DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for urine and other body fluids \x96 Isolated cell free DNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Isolated circulating cell free RNA from plasma | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 1: Isolated cellular RNA | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 2: Isolated genomic DNA | |
| Nanotechnologies \x96 Guidance for the responsible development of nanotechnologies | |
| Nanotechnologies \x96 Guidance on detection and identification of nano-objects in complex matrices | |
| Nanotechnologies \x96 Guidance on measurands for characterising nano-objects and materials that contain them | |
| Nanotechnologies \x96 Guidelines for determining protocols for the explosivity and flammability of powders containing nano-objects (for transport, handling and storage) | |
| Nanotechnologies \x96 Guidelines for Life Cycle Assessment \x96 Application of EN ISO 14044:2006 to Manufactured Nanomaterials | |
| Nanotechnologies \x96 Guidelines for the management and disposal of waste from the manufacturing and processing of manufactured nano-objects | |
| Nanotechnologies \x96 Nano- and micro- scale scratch testing | |
| National wordings of laser warning labels | |
| Non-destructive testing \x96 Penetrant testing \x96 Reference photographs and sizing of indications | |
| Non-destructive testing \x96 Test method for determining residual stresses by synchrotron x-ray diffraction | |
| OPC unified architecture \x96 Part 1: Overview and concepts | |
| OPC unified architecture \x96 Part 2: Security Model | |
| Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards | |
| Organic and organo-mineral fertilizers \x96 Detection of specific pathogens | |
| Organic and organo-mineral fertilizers \x96 Determination of specific elements | |
| Organic and organo-mineral fertilizers \x96 Determination of specific parameters | |
| Organic and organo-mineral fertilizers \x96 Determination of the biuret content by high-performance liquid chromatography (HPLC) | |
| Organic and organo-mineral fertilizers \x96 Determination of the chromium (VI) content by chromotography | |
| Organic and organo-mineral fertilizers \x96 Determination of the content of specific elements by ICP-AES after extraction by water | |
| Organic and organo-mineral fertilizers \x96 Determination of the dry matter content | |
| Organic and organo-mineral fertilizers \x96 Determination of the inorganic arsenic content | |
| Organic and organo-mineral fertilizers \x96 Determination of the mercury content | |
| Organic and organo-mineral fertilizers \x96 Determination of the nitrogen content | |
| Organic and organo-mineral fertilizers \x96 Determination of the total content of specific elements by ICP-AES after digestion by aqua regia | |
| Organic and organo-mineral fertilizers \x96 Determination of the total organic carbon (TOC) content by dry combustion | |
| Organic and organo-mineral fertilizers \x96 Digestion by aqua regia for subsequent determination of elements | |
| Organic and organo-mineral fertilizers \x96 Extraction by water for subsequent determination of elements | |
| Organic fertilizers, organo-mineral fertilizers, inorganic fertilizers and liming materials \x96 Determination of the chloride content | |
| Organic soil improvers \x96 Determination of specific parameters | |
| Organic, organo-mineral and inorganic fertilizers \x96 Detection of Enterocococaceae | |
| Organic, organo-mineral and inorganic fertilizers \x96 Detection of Escherichia coli | |
| Organic, organo-mineral and inorganic fertilizers \x96 Detection of Salmonella spp. | |
| Organo-mineral fertilizers \x96 Determination of chelating and complexing agents | |
| Organo-mineral fertilizers \x96 Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin | |
| Organo-mineral fertilizers \x96 Determination of the fraction of complexed micronutrients | |
| Organo-mineral fertilizers \x96 Extraction of phosphorus by formic acid | |
| Organo-mineral fertilizers \x96 Extraction of phosphorus, which is soluble in neutral ammonium citrate | |
| Organo-mineral fertilizers \x96 Identification of chelating agents \x96 Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography | |
| Organo-mineral fertilizers \x96 Identification of chelating agents \x96 Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents by ion pair... | |
| Organo-mineral fertilizers \x96 Identification of complexing agents \x96 Part 1: Method using UV-Vis spectrophotometry and gravimetry | |
| Organo-mineral fertilizers \x96 Identification of complexing agents \x96 Part 2: Method using high-performance liquid chromatography (HPLC) | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of end grain sealing performance | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Part 12: Ultraviolet and visible radiation transmittance | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Part 9: Determination of pull-off strength after water exposure | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 2-1: SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre | |
| Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre | |
| Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions | |
| Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching | |
| Personal identification - Borders and law enforcement application profiles for mobile biometric identification systems | |
| Personal identification \x96 Biometric group access control | |
| Personal identification \x96 European enrolment guide for biometric ID documents (EEG) | |
| Personal identification \x96 European guide for biometric recognition applications based on ID documents (ERG) | |
| Personal identification \x96 Robustness against biometric presentation attacks \x96 Application to European Automated Border Control | |
| Personal identification \x96 Secure and interoperable European Breeder Documents \x96 Part 1: Framework overview | |
| Photocatalysis \x96 Continuous flow test methods \x96 Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials | |
| Photocatalysis \x96 Glossary of terms | |
| Plant biostimulants \x96 Claims \x96 Part 1: General principles | |
| Plant biostimulants \x96 Claims \x96 Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 4: Determination of quality traits resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 5: Determination of availability of confined nutrients in the soil or rhizosphere | |
| Plant biostimulants \x96 Detection of Listeria monocytogenes | |
| Plant biostimulants \x96 Detection of Salmonella spp. | |
| Plant biostimulants \x96 Detection of Shigella spp. | |
| Plant biostimulants \x96 Detection of Staphylococcus aureus | |
| Plant biostimulants \x96 Detection of Vibrio spp. | |
| Plant biostimulants \x96 Determination of Azospirillum spp. | |
| Plant biostimulants \x96 Determination of Azotobacter spp. | |
| Plant biostimulants \x96 Determination of chloride | |
| Plant biostimulants \x96 Determination of chromium(VI) | |
| Plant biostimulants \x96 Determination of dry matter | |
| Plant biostimulants \x96 Determination of Enterococcaceae | |
| Plant biostimulants \x96 Determination of Escherichia coli | |
| Plant biostimulants \x96 Determination of inorganic arsenic | |
| Plant biostimulants \x96 Determination of microorganisms' concentration | |
| Plant biostimulants \x96 Determination of mycorrhizal fungi | |
| Plant biostimulants \x96 Determination of phosphonates | |
| Plant biostimulants \x96 Determination of Rhizobium spp. | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 1: Digestion by aqua regia for subsequent determination of elements | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 3: Determination of mercury | |
| Plant biostimulants \x96 Determination of the anaerobic plate count | |
| Plant biostimulants \x96 Determination of the pH for liquid microbial plant biostimulants/pH in microbial products \x96 Determination of pH | |
| Plant biostimulants \x96 Determination of the quantity (indicated by mass or volume) | |
| Plant biostimulants \x96 Determination of the yeast and mould content | |
| Plant biostimulants \x96 Preparation of sample for microbial analysis | |
| Plant biostimulants \x96 Sampling and sample preparation \x96 Part 1: Sampling | |
| Plant biostimulants \x96 Sampling and sample preparation \x96 Part 2: Sample preparation | |
| Plant biostimulants \x96 Terminology | |
| Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) | |
| Plastics - Welding of thermoplastics - Specification of welding procedures | |
| Plastics \x96 Recycled plastics \x96 Determination of solid contaminants content | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Boxes used for infiltration, attenuation and storage systems \x96 Part 3: Conformity assessment scheme | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Boxes used for infiltration, attenuation and storage systems \x96 Part 4: Guidance for structural design of modular... | |
| Plastics piping systems for non-pressure underground conveyance of surface water \x96 Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 3: Assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Polypropylene (PP) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure \x96 Oriented unplasticized poly(vinyl chloride) (PVC-O) \x96 Part 3: Fittings | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure \x96 Oriented unplasticized poly(vinyl chloride) (PVC-O) \x96 Part 7: Assessment of conformity... | |
| Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline | |
| Postal services - Extensible Common Structure and Representation for Postal Rates - EPR | |
| Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE | |
| Postal services - Parcel boxes for end use - Technical features | |
| Postal services \x96 Digital, optional online connected, opening and closing systems for parcel receptacles for home use with free access for the delivery and collection operators and consumers | |
| Postal services \x96 Harmonized track and trace events \x96 Part 1: Forward flow | |
| Postal services \x96 Interfaces for cross border parcels | |
| Postal services \x96 Packaging for boxable items \x96 Characteristics for packaging of small and light weight items to be delivered into the consumer\x92s letterbox | |
| Postal services \x96 Reverse envelope \x96 Design and printing requirements | |
| Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 1: General | |
| Pressure equipment - Part 6: Structure and content of operating instructions | |
| Pressure equipment and assemblies \x96 Part 8: Proof test | |
| Procedure for the withdrawal of conflicting national standards at the implementation of European Standards prepared under a Part 1/Part 2X system | |
| Protection Profiles for TSP cryptographic modules \x96 Part 1: Overview | |
| Protection Profiles for TSP cryptographic modules \x96 Part 2: Cryptographic module for CSP signing operations with backup | |
| Protection Profiles for TSP Cryptographic modules \x96 Part 3: Cryptographic module for CSP key generation services | |
| Protection Profiles for TSP cryptographic modules \x96 Part 4: Cryptographic module for CSP signing operations without backup | |
| Public transport \x96 Communication between contactless readers and fare media \x96 Part 1: Implementation requirements for ISO/IEC 14443 | |
| Public transport \x96 Communication between contactless readers and fare media \x96 Part 2: Test plan for ISO/IEC 14443 | |
| Pulp, paper and paperboard \x96 Determination of anthraquinone in extracts from pulp, paper and paperboard | |
| Pulp, paper and paperboard \x96 Determination of bisphenol A in extracts from paper and paperboard | |
| Quality of care and support for older persons | |
| Radiation protection instrumentation \x96 Determination of uncertainty in measurement | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 1: Description of phenomena | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 2: Methods of measurement and procedure for determining limits | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 3: Code of practice for minimizing the generation of radio noise | |
| Railway Application \x96 Fixed Installations \x96 Specification for reversible d.c. substations | |
| Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance | |
| Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 2: Safety assurance | |
| Railway applications - Communications, signalling and processing systems - ERTMS/ETCS - External signalling for lines equipped with ERTMS/ETCS Level 2 | |
| Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components | |
| Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers | |
| Railway applications - Functional Interface Specification - Pantograph System | |
| Railway applications - Functional Interface Specification. - Door System | |
| Railway applications - Interference limits of existing track circuits used on European railways | |
| Railway applications - Radio remote control system of traction vehicle for freight traffic in multiple traction operation | |
| Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 1: Data dictionary and rules for functional standardisation | |
| Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 2: Technical contents of standardization work in the field of intercommunication | |
| Railway applications - Systematic allocation of safety integrity requirements | |
| Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety | |
| Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 3: Guide to the application of EN 50126-1 for rolling stock RAM | |
| Railway applications - Train Modes functional interface specification | |
| Railway applications \x96 Driver's cab train display controller (TDC) \x96 Part 1: General architecture | |
| Railway applications \x96 Driver's cab Train Display Controller (TDC) \x96 Part 2: Display systems FIS | |
| Railway applications \x96 Driver's cab train Display Controller (TDC) \x96 Part 3: Other train systems FIS | |
| Railway applications \x96 Investigations on vehicles to quantify track loading in curve radii below 250 m | |
| Railway applications \x96 Safety measures for the personnel working on or near overhead contact lines | |
| Reasonably Foreseeable Use Conditions when referring to EMF Exposure Assessment | |
| Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations | |
| Recommendations for shielded enclosures | |
| Recommendations on filters for shielded enclosures | |
| Requirements and test methods for electronic cigarette devices | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x96 Circular economy and sustainability \x96 Recommendations/guid elines for design | |
| Resistibility requirements for equipment having (a) telecommunication port(s) | |
| Road restraint systems \x96 Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers | |
| Road restraint systems \x96 Truck Mounted Attenuators \x96 Performance classes, impact test acceptance criteria and test performance | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation | |
| Rotating electrical machines - Part 16-2: Exciting systems for synchronous machines - Models for power system studies | |
| Rotating electrical machines - Part 16-3: Excitation systems for synchronous machines - Dynamic performance | |
| Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide | |
| Rotating electrical machines \x96 Part 30-2: Efficiency classes of variable speed AC motors (IE-code) | |
| Rotating electrical machines \x96 Part 31: Selection of energy-efficient motors including variable speed applications \x96 Application guidelines | |
| Rotating electrical machines \x96 Part 32: Measurement of stator end-winding vibration at form-wound windings | |
| Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors | |
| Safety of amusement rides and devices: Manufacturing quality recommendations for machinery components | |
| Safety of household and similar electrical appliances \x96 Interpretations related to European Standards in the EN 60335 series | |
| Safety of machinery \x96 Security aspects related to functional safety of safety-related control systems | |
| Safety of toys \x96 Categorization of slime type materials | |
| Safety rules for the construction and installation of lifts - Basics and interpretations - Part 11: Interpretations related to EN 81 family of standards | |
| Safety rules for the construction and installation of lifts - Existing lifts - Part 83: Rules for the improvement of the resistance against vandalism | |
| Safety rules for the construction and installation of lifts \x96 Particular applications for passengers and goods passenger lifts \x96 Part 76: Evacuation of disabled persons using lifts | |
| Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline | |
| Security for industrial automation and control systems \x96 Part 1-5: Scheme for IEC 62443 security profiles | |
| Security requirements for trustworthy systems managing certificates and time-stamps | |
| Security Requirements for Trustworthy Systems Supporting Server Signing | |
| Service excellence \x96 Creating outstanding customer experiences through service excellence | |
| Service model for social care alarms | |
| Smart grid projects in Europe | |
| Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management | |
| Societal and Citizen Security - Guidance for managing security in healthcare facilities | |
| Societal and citizen security \x96 Guidance for the security of hazardous materials (CBRNE) in healthcare facilities | |
| Soil improvers \x96 Determination of specific parameters | |
| Soil improvers and growing media \x96 Sampling and sample preparation | |
| Soil improvers and growing media \x96 Terminology | |
| Source materials considered in the development of the Aggregate standards of TC 154 | |
| SPD application in conjunction with Class II equipment | |
| Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 4-5: Uncertainties, statistics and limit modelling \x96 Conditions for the use of alternative test methods | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs | |
| Stationary source emissions \x96 Determination of mass concentration of fluorinated compounds expressed as HF \x96 Standard reference method | |
| Stationary source emissions \x96 Determination of mass concentration of multiple gaseous species \x96 Fourier transform infrared spectroscopy | |
| Stationary source emissions \x96 Determination of the mass concentration of formaldehyde \x96 Automatic method | |
| Stationary source emissions \x96 Determination of the mass concentration of sulphur dioxide by instrumental techniques | |
| Stationary source emissions \x96 Determination of the volume concentration of carbon dioxide \x96 Reference method: infrared spectrometry | |
| Stationary source emissions \x96 Manual method for the determination of the mass concentration of formaldehyde \x96 Reference method | |
| Stationary source emissions \x96 Mercury monitoring using sorbent traps | |
| Stationary source emissions \x96 Predictive Emission Monitoring Systems (PEMS) \x96 Applicability, execution and quality assurance | |
| Statistical verification of partial factors for buildings according to Eurocode EN 1993-1-1 Annex E | |
| Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz | |
| Surface Active Agents \x96 Bio-based surfactants \x96 Requirements and test methods | |
| Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete | |
| Technical Guidelines for Radial HVDC Networks | |
| Temperatures of hot surfaces likely to be touched - Guidance document for Technical Committees and manufacturers | |
| Textiles and textile products - Self-declared environmental claims - Use of the terms | |
| Textiles and textile products \x96 Community face coverings \x96 Minimum requirements, methods of testing and use | |
| Textiles and textile products \x96 Part 1: Safety of children's clothing \x96 Security of attachment of attached components to infants' clothing \x96 Specification | |
| Textiles and textile products \x96 Part 3: Safety of children's clothing \x96 Security of attachment of metal mechanically applied press fasteners \x96 Test method | |
| Textiles and textile products \x96 Part 4: Safety of children's clothing \x96 Security of attachment of components except buttons and metal mechanically applied press fasteners \x96 Test method | |
| Three-level approach for a set of cybersecurity requirements for cloud services | |
| Ventilation for buildings \x96 Correction of air flow rate according to ambient conditions | |
| Wind turbines - Electromagnetic compatibility | |
| Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods | |
| Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment | |
| Workplace exposure \x96 Direct-reading low-cost particulate matter sensors for measuring airborne NOAA \x96 Guidelines for application |
| << Prev | Next >> |