Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
100
150
200
250
300
350
360
370
380
390
400
410
420
421
422
423
424
425
426
427
428
429
430
431
432
440
450
460
470
480
490
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| (732-SHB:PHC) PERSONNEL EXPOSURE LIMIT VALUES FOR HEALTH HAZARDOUS AIR CONTAMINANTS | |
| (BUMED-24) PROCEDURES FOR OBTAINING HEALTH HAZARD ASSESSMENTS (HHAS) | |
| (BUMED-27) MEDICAL AUGMENTATION PROGRAM (MAP) | |
| (BUMED-3C22) USE OF POTASSIUM IODINE DURING A RADIOLOGICAL EMERGENCY | |
| (BUMED-54) CONTINUING EDUCATION (CE), PROFESSIONAL UPDATE TRAINING (PUT), AND ALTERNATIVE INSTRUCTIONAL SYSTEMS (AIS) FOR MEDICAL DEPARTMENT PERSONNEL | |
| (BUMED-63) NITROUS OXIDE-OXYGEN (N2O-O2) INHALATION CONSCIOUS SEDATION FOR DENTAL OUTPATIENT SERVICES | |
| (BUMED-631) OUTPATIENT INTRAVENOUS SEDATION FOR DENTAL PATIENTS | |
| (BUMED-M1) HEALTH SERVICES AUGMENTATION PROGRAM (HSAP) | |
| (BUMED-M3F4) BUREAU OF MEDICINE AND SURGERY (BUMED) NAVY OCCUPATIONAL SAFETY AND HEALTH (NAVOSH) PROGRAM | |
| (BUMED-M3F4) INTRODUCTION OF REVISED NAVMED 4061/1 REV. 2-2003) USN BUMED FOOD SAFETY TRAINING CERTIFICATE | |
| (BUPERS-00) BUREAU OF NAVAL PRESONNEL ANTITERRORISM/PHYSIC AL SECURITY PLAN | |
| (BUPERS-00D) PRISONER RE-ENTRY PROGRAM | |
| (BUPERS-00D) SUICIDE WATCH COMPANION PROGRAM FOR MILITARY CORRECTIONAL FACILITIES | |
| (BUPERS-00D) U.S. NAVY DESIGNATED PLACES OF SHORE CONFINEMENT | |
| (BUPERS-00J) IMPLEMENTATION OF THE FREEDOM OF INFORMATION ACT IN ACTIVITIES UNDER THE COMMAND OF THE CHIEF OF NAVAL PERSONNEL | |
| (BUPERS-05) CIVILIAN AWARDS PROGRAM FOR THE BUREAU OF NAVAL PERSONNEL | |
| (BUPERS-05) CIVILIAN MERIT STAFFING PLAN | |
| (BUPERS-05) TOTAL WORKFORCE MANAGEMENT SERVICES | |
| (MEDCOM-23) FIRST AID KITS FOR AIRCRAFT AND FLIGHT PERSONNEL NAVMEDCOM | |
| (N13) MANAGEMENT OF NAVY UNIFORMED PERSONNEL DIAGNOSED WITH PSEUDOFOLLICULITIS BARBAE | |
| (N13) STANDARDS AND PROCEDURES GOVERNING THE ACCOMMODATION OF RELIGIOUS PRACTICES | |
| (NMPC-651) ADMINISTRATION OF RECREATION PROGRAMS AFLOAT NMPC | |
| (NMPC-653) RISK MANAGEMENT MANUAL FOR NAVY RECREATIONAL SERVICES NONAPPROPRIATED FUND ACTIVITIES NMPC CHG NOT 1 - 01/05/87 | |
| (OCPM-11) DEPARTMENT OF THE NAVY FEDERAL WAGE SYSTEM PROGRAM OCPM | |
| (PERS-03) INSPECTION SCHEDULE FOR ACTIVITIES UNDER THE FUNCTIONAL CONTROL OF THE CHIEF OF NAVAL PERSONNEL (CHNAVPERS) | |
| (PERS-2) CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD 214, DD 214C, DD 214WS, AND DD 215) | |
| (PERS-32) NAVY PERFORMANCE EVALUATION SYSTEM | |
| (PERS-322) NAVY ENLISTED PERFORMANCE EVALUATION (EVAL) MANUAL CHG NOT 1 - 08/09/93 | |
| (PERS-45E) ASTRONAUT CANDIDATE SELECTION PROGRAM | |
| (PERS-4D) SUPPLEMENTAL GUIDANCE FOR U.S. NAVY SELECTION | |
| (PERS-80) SUPPLEMENTAL GUIDANCE FOR U.S. NAVY SELECTION BOARDS | |
| (PERS-81) ADVANCEMENT MANUAL FOR ENLISTED PERSONNEL OF THE U.S. NAVY AND U.S. NAVY RESERVE | |
| (PERS-81) SUPPLEMENTAL GUIDANCE FOR U.S. NAVY SELECTION BOARDS | |
| (PERS-9) ADMINISTRATIVE PROCEDURES FOR NAVY RESERVE PERSONNEL | |
| (SER 24/99U24070) CHAPTER 1, MANUAL OF NAVAL PREVENTION MEDICINE FOOD SAFETY NAVMED | |
| 3D Stress Criteria Guidelines for Application | |
| 3D-Finite Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress: Part 1 & Part 2 | |
| A Coated Electrode for Fusion Welding Aisi 4340 Steel for Ultra High Strength Applications, Method for Determining The Total Water in Welding Electrode Coatings | |
| A Comparison of Criteria for Acceptance of Risk | |
| A Critical Evaluation of The Strength of Thick-Walled Cylindrical Pressure Vessels | |
| A Critical Study of The Solutions for The Asymmetric Bending of Spherical Shells Solutions for The Stresses at Nozzles in Pressure Vessels Stress Concentration Factors for The Stresses at Nozzle... | |
| A Literature Review on Characteristics of High Temperature Ferritic Cr-Mo Steels and Weldments | |
| A New Design Criterion Based on Pressure Testing of Torispherical Heads | |
| A Review of Methods for the Analysis of Buried Pressure Piping | |
| A Review, Comparison and Modification of Present Deflection Theory for Flat Perforated Plates Correlation of Experimental Data With Theory for Perforated Plates With A Triangular Hole Array | |
| A Study Concerning the Heat Affected Zone Toughness of Microalloyed Steels | |
| A Survey of Literature on The Stability of Frames Tests on The Stability of Welded Steel Frames | |
| A Synthesis of the Fracture Assessment Methods Proposed in the French RCC-MR Code for High Temperature | |
| Alternative Methods for Seismic Analysis of Piping Systems | |
| Aluminum and Aluminum Alloys for Pressure Vessels | |
| Aluminum Conductors Used for Building Wire and Cable | |
| An Analytical Comparison of Short Crack and Deep Crack CTOD Fracture Specimens of an A36 Steel; The Effects of Crack Depth on Elastic-Plastic CTOD Fracture Toughness; A Comparison of the... | |
| An Engineering Approach for Determining Minimum Pressurization Temperature (MPT) in Heavy-Wall 2.25 Cr \x96 1 Mo Steel Reactors in Hydrogen Service | |
| An Experimental Investigation of Open-Web Beams | |
| An Experimental Investigation of Stresses in The Neighborhood of Attachments to A Cylindrical Shell Interpretive Commentary on The Application of Theory to Experimental Results | |
| An Experimental Study of Causes and Repair of Cracking of 1\xbcCr-\xbdMo Steel Equipment | |
| An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas | |
| Analysis of A Perforated Circular Plate Containing A Rectangular Array of Holes Stresses and Deflections in Laterally Loaded Perforated Plates | |
| Analysis of The Effects of Temperature on Bolted Joints | |
| Analysis of the Plausible Profiles (Psqr) Method | |
| API 579-1/ASME FFS-1: Part 5 Evaluation of Local Thin Areas in the Vicinity of Head-to-Shell Transitions | |
| Arc Welding of Magnesium and Magnesium Alloys | |
| Arc Welding of Thick Cross Sections | |
| Assessment of Existing Fiber Reinforced Polymer Equipment for Structural Damage | |
| Assessment, Sample Problems and Commentary on Design for Section III, Division 3 (Nupack) of the ASME Boiler & Pressure Vessel Code | |
| ASTM ELEARNING: C1019 Standard Test Method for Sampling and Testing Grout for Masonry: SINGLE-USER LICENSE | |
| Basis of Current Dynamic Stress Criteria for Piping | |
| Behavior of Bellows | |
| Bending of 2:1 and 3:1 Open-Crown Ellipsoidal Shells | |
| Biaxial Durability Simulation Table of Contents | |
| Biaxial Thermo-Mechanical Fatigue Response of SS-316 Structures | |
| Bibliography of the Welding Research Supplements of the Welding Journal from 1950-1996 | |
| Bolted Flange Assembly: Preliminary Elastic Interaction Data and Improved Bolt-Up Procedures | |
| Brazed Honeycomb Structures | |
| Buckling and Post Buckling of Plate Girders in Bending | |
| Buckling Criteria for Torishperical Heads Under Internal Pressure | |
| Business Continuity \x96 Table of Relevant Standards Implementing a Business Continuity Management System: a table of relevant publications which can help your organisation achieve its goals | |
| Buttress Thread Joint Strength | |
| BuyIT Guidelines | |
| C-\xbd Mo Steel Toughness Properties for Hydrogen Service | |
| Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas | |
| Calculation of Weld Residual Stresses and the Effects of Local Post-Weld Heat Treatment | |
| Challenges and Solutions in Repair Welding for Power and Processing Plants | |
| CHAPTER 5 WATER SUPPLY ASHORE NAVMED | |
| Characterization of Crack Surface Morphology of Reheat and Hydrogen Assisted Cracks in Submerged Arc Weld Deposits of 2-1/4Cr-1Mo-V (22V) Steels | |
| Characterization of Pwht Behavior of 500 N/Mm2 Class Tmcp Steels | |
| Characterization of The Fine-Scale Weld Deposit Microstructure and Its Influence on The Elevated Temperature Properties of 2.25Cr-1Mo-0.25V Weldments in Heavy Wall Pressure Vessels | |
| COMBUSTION AND ATMOSPHERE CONTROLS FOR OVENS AND FURNACES | |
| Commentary on The Alternative Rules for Determining Allowable Compressive Stresses for Cylinders, Cones, Spheres and Formed Heads for Section VIII, Divisions 1 and 2 | |
| Comparison and Analysis of Notch Toughness Tests for Steels in Welded Structures | |
| Comparison of Methods for Evaluating Local Thin Areas in Cylinders Subject to Pressure, Moments and Forces | |
| Compendium of High Temperature Hydrogen Attack (HTHA) Damage in C-\xbd Mo Steels | |
| Compendium of Temperature-Dependen t Physical Properties for Pressure Vessel, Piping and Tankage Materials | |
| Constraint Effects on Fracture Behavior: I) The Effect of Crack Depth (A) and Crack-Depth to Width Ratio (A/W) on The Fracture Toughness of A533-B Steel; II) An Analytical Investigation of... | |
| Constraint Effects on Fracture Toughness in Ductile-Brittle Transition Region for Arbitrary Through-Wall Stress Distributions | |
| Constraint Effects on Fracture Toughness in Ductile-Brittle Transition Region | |
| Copper and Copper Alloys for Pressure Vessels | |
| Copper in Stainless Steels | |
| Crack-Starter Weld Bead Deposition for Astm E 208 Drop-Weight Testing: Part 1 & Part 2 | |
| Creep and Creep/Fatigue Crack Growth Modeling and Testing Methods Relevant to Life Assessment of Cracked Components | |
| Creep Crack Growth Behavior in Weld Metal/Base/Metal/Fus ion Zone Regions in Chromium Molybdenum Steels | |
| Creep Crack Growth: Assessment of Defects in High Temperature Components | |
| Creep-Fatigue Damage Assessment in Type 316 Stainless Steel Under Uniaxial and Multiaxial Strain Cycling at 1150\xb0F | |
| Critical Factors in The Interpretation of Radiation Effects on The Mechanical Properties of Structural Metals Commercial Implications of Radiation Effects on Reactor Pressure Vessel Design, Fabrication and Operation Design Criteria... | |
| Current Concepts for Life Assessment of Pressure Vessels and Piping | |
| D. C. Welding Power Sources for Gas-Shielded Metal Arc Welding | |
| D1-All; Structural Welding Code Bundled Set B, Including Structural Welding Codes for Steel, Aluminum, Sheet Steel, Reinforced Steel, Bridge Welding and Stainless Steel. | |
| Damage Mechanisms Affecting Fixed Equipment in The Fossil Electric Power Industry | |
| Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry | |
| Damage Mechanisms Affecting Fixed Equipment in the Refining Industry | |
| Design and Inservice Margins of Power Piping Systems: A Comparative Study of U. S., Canadian and European Codes & Standards | |
| Design and Repair of Buried Pipe | |
| Design Criteria for Dissimilar Metal Welds | |
| Design Guide to Reduce Potential for Vibration Caused By Fluid Flow Inside Pipes-Review and Survey | |
| Design of A Thin-Walled Cylindrical Pressure Vessel Based Upon The Plastic Range and Considering Anisotrophy | |
| Design of Pressure Vessels for High Strain Rate Loading: Dynamic Pressure and Failure Criteria: Detonation-Induced Dynamic Pressure Loading in Containment Vessels; Ductile Failure Criteria for Detonation-Induced Pressure Loading in Containment... | |
| Design of Thick-Walled Pressure Vessels Based Upon The Plastic Range | |
| Design of Torispherical and Ellipsoidal Heads Subjected to Internal Pressure | |
| Determination of Pressure Boundary Joint Assembly Bolt Loads | |
| Determination of The Gasket Effective Width for The ASME Proposed Flange Design Rules | |
| Developing Stress Intensification Factors: I - Standardized Method for Developing Stress Intensification Factors for Piping Components ; Ii - Effects of Weld Metal Profile on The Fatigue Life of Integrally... | |
| Development and Use of A Simple Test Method to Evaluate Reheat Cracking Sensitivity in The Weld Deposit Region of A Submerged Arc Weld | |
| Development of a Comprehensive Static Seismic Analysis Method for Piping Systems | |
| Development of Criteria for Assessment of Reactor Vessels With Low Upper Shelf Fracture Toughness | |
| Development of Design Rules for Conical Transitions in Pressure Vessels for The ASME B&Pv Code, Section VIII, Division 2 | |
| Development of Design Rules for Nozzles in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2 | |
| Development of Fitness-For-Service Assessment Procedures for Weld Misalignment and Shell Distortions in API 579-1/ASME FFS-1 | |
| Development of Fitness-For-Service Rules for the Assessment of Hydrogen Blisters, HIC and SOHIC | |
| Development of General Formulas for Bolted Flanges | |
| Development of Material Fracture Toughness Rules for ASME B&PV Code, Section VIII, Division 2 | |
| Development of New Methods to Incorporate Secondary Stresses into Level 2 and 3 Crack Assessments | |
| Development of New Residual Stress Profiles for API 579-1/ASME FFS-1 | |
| Development of Stress Intensity Factor Solutions for Surface and Embedded Cracks in API 579 | |
| Development of Test Procedures for Fire Resistance Qualification of Gaskets | |
| Differential Design and Construction Cost of Nuclear Power Plant Piping Systems As A Function of Seismic Intensity and Time Period of Construction | |
| Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico | |
| Effect of Flange Rotation and Gasket Width on Leakage Behavior of Bolted Flanged Joints: Part 1, Part 2, & Part 3 | |
| Effect of Heat Treatment on the Elevated Temperature Properties of a 2 \xbcCr-1Mo Submerged Arc Weldment | |
| Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals | |
| Effect of The Misalignment of Piping Systems and Non Parallel Flange Faces on The Tightness of DN200 PN40 Flanged Joints | |
| Effects of Heat Treatment and Chemical Composition on High Temperature Hydrogen Attack Resistance of C-\xbd Mo Steels | |
| Effects of Phosphorous and Sulfur on Suceptibility to Weld Hot Cracking in Austenitic Stainless Steels | |
| Effects of Welding-Induced Distortions on Fatigue Behaviors of Plate Structures: Computational Modeling and Analytical Solutions | |
| ELECTRONICS ASSEMBLY STANDARDS COLLECTION | |
| Elevated Temperature Characterization of Flexible Graphite Sheet Materials for Bolted Flanged Joints | |
| Elevated Temperature Testing of Gaskets for Bolted Flanged Connections | |
| Empirical Modeling for Real-Time Weld Process Control and Generator Monitoring | |
| EMPLOYEE MOTIVATION PROGRAMS FOR SAFETY AND PREVENTION OF POLLUTION IN OFFSHORE OPERATIONS | |
| Evaluation of Design Criteria for Storage Tanks With Frangible Roof Joints | |
| Evaluation of Design Margins for Section VIII, Div. 1 and 2 of The ASME Boiler and Pressure Vessel Code | |
| Evaluation of Hydrogen Attack Damage in C-1/2Mo Weldment (MPC-18) | |
| Evaluation of Material Strength Data for Use in API Std 530 | |
| Evaluation of Operating Margins for In-Service Pressure Equipment | |
| Evaluation of Seismic Response Data for Piping | |
| Evaluation of Small (r/R<0.5) Branch Connections with Through-Run Moments: Part 1 & Part 2 | |
| Evaluation of Welded Attachments on Pipe and Elbows: Background and Suggested Revisions: ASME Code Cases N-122-2 and N-318-5 Lugs on Straight Pipe; Evaluation of Welded Attachments on Pipe and Elbows... | |
| Examination of Mechanical Properties and Corrosion of High Temperature Alloys After Long Term Service Under Advanced Power Plant Boiler Conditions-the Eddystone Studies | |
| Expansion of 300-Series L-Grade Creep Dataset for API Std 530 and API 579-1/ASME FFS-1 | |
| Experimental Investigation of Stresses in Nozzles in Cylindrical Pressure Vessels | |
| Experimental Leak Testing of 16-Inch Class 300 RFWN Flange with and Without External Bending Moment | |
| Experiments on Braced Wide-Flange Beams The Experimental Bases for Plastic Design | |
| External Bending Moments on Bolted Gasketed Joints: Part 1 The Effects of Bending Moments on Bolted Gasketed Joints & Part 2 Effect of Gasket Type on the Behavior of NPS... | |
| External Pressure: Effect of Initial Imperfections and Temperature Limits | |
| Fabrication and Repair of Low Alloy Steel Pressure Equipment | |
| Factors Which Affect Low-Alloy Weld Metal Notch-Toughness | |
| Failure Analysis of a Service-Exposed Hot Reheat Steam Line in a Utility Steam Plant; The Influence of Flux Composition on the Elevated Temperature Properties of CR-MO Submerged Arc Weldments | |
| Failure Analysis of PVRC Vessel No. 5; Part I \x96 A Study of Materials Properties and Fracture Development; Part Ii \x96 An Electron Microscope Fractographic Study of Selected Portions of... | |
| Failure of Welds at Elevated Temperatures | |
| Fatigue Crack Growth of Low-Alloy Steels in Light Water Reactor Environments: I) Environmentally-Assi sted Cracking of Ferritic Steels in Aqueous Environments: An Interpretive Review; II) Modelling of Fatigue Crack Growth... | |
| Fatigue of Butt-Welded Pipe and Effect of Testing Methods: Fatigue of Butt-Welded Pipe; Effect of Testing Methods on Stress Intensification Factors | |
| Fatigue of Welded Structures | |
| Fatigue Strength Reduction and Stress Concentration Factors for Welds in Pressure Vessels and Piping: Part 1 & Part 2 | |
| Fatigue, Tensile, and Relaxation Behavior of Stainless Steels | |
| Feasibility Studies of Stresses in Ligaments | |
| Final Report \x96 Laser Repair of Directionally Solidified Superalloys | |
| Finite Element Analysis of Stress Rupture in Pressure Vessels Exposed to Accidental Fire Loading | |
| Finite Element Modelling of A Single Pass Weld ; Finite Element Analysis of Multi-Pass Welds ; Thermal and Mechanical Simulations of Resistance Spot Welding | |
| Fitness-For-Service Evaluation Procedures for Operating Pressure Vessels, Tanks, and Piping in Refinery and Chemical Service | |
| FLEXIBLE PRINTED BOARD STANDARDS COLLECTION | |
| Fourth Technical Progress Report of The Ship Structure Committee | |
| Fracture Analysis Diagram Procedures for The Fracture-Safe Engineering Design of Steel Structures | |
| Fracture Toughness Master Curve Development: Application of Mastercurve Fracture Toughness Methodology for Ferritic Steels | |
| Fracture Toughness Master Curve Development: Fracture Toughness of Ferritic Steels and ASTM Reference Temperature (To) | |
| Fracture Toughness Master Curve Development: Master Curve Strategies for RPV Assessment | |
| Fracture-Safe and Fatigue Design Criteria for Detonation-Induced Pressure Loading in Containment Vessels | |
| Fundamental Studies of Hydrogen Attack in C-0.5Mo Steel and Weldments | |
| Fundamental Studies of the Metallurgical Causes and Mitigation of Reheat Cracking in 1\xbcCr-\xbdMo and 2\xbcCr-1Mo Steels | |
| Gas and Oil Pipeline Welding Practices | |
| Gasketed Joint Leakage and Emissions | |
| Guidance on the Application of Code Case 2211\x97Overpressure Protection by Systems Design | |
| GUIDE FOR ACCEPTANCE, CHECKOUT, AND PRE-OPERATIONAL TESTING OF A NUCLEAR FUELS REPROCESSING FACILITY | |
| Guide Specifications for Bridges Vulnerable to Coastal Storms | |
| Guidelines for Flow-Induced Vibration Prevention in Heat Exchangers | |
| Guidelines for Modeling Cylinder-To-Cylinder Intersections | |
| Guidelines for Repair Welding of Pressure Equipment in Refineries and Chemical Plants | |
| Guidelines for Sizing of Vessels by Limit Analysis | |
| Guidelines for The Approval of New Materials in WRC Bulletin 541, API STD 530, and API 579-1/ASME FFS-1 | |
| Guidelines for The Design and Installation of Pump Piping Systems | |
| Half-Bead Temper-Bead Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels | |
| Heat Exchanger Flow Characterization\x97 Hxflow Software: Theory Document and Users Manual | |
| Heavy Machinery Design Bundle; AWS D14.3/D14.3M 2010-AMD 1, AWS B2.1/B2.1M 2014 | |
| High Energy Piping Compendium of Optical and Cryo-Crack Creep Damage Assessment | |
| High Performance Cast G\x92-Strengthened Nickel Based Superalloys \x96 An Interpretive Report | |
| High Temperature Cracking and Properties of Stainless Steel Flux-Cored Welds and Effects of Bismuth | |
| How Plastic Deformation Influences Design and Forming of Metal Parts Brittle Fracture in Mild Steel | |
| Improved Flange Design Method for The ASME, Div. 2 Rewrite Project: Status of Present Design Methods | |
| Improvements in The Thinning Damage Factor Calculation Planned for The 3Rd Edition of API Rp 581 | |
| Improvements on Fatigue Analysis Methods for the Design of Nuclear Components Subjected to the French RCC-M Code; Framatome View on the Comparison Between Class 1 and Class 2 RCC-M Piping... | |
| Improving Steel Spot Weld Fatigue Resistance | |
| Incorporation of Structural Reliability Methods Into Fitness for Service Procedures | |
| Independent Support Motion (ISM) Method of Modal Spectra Seismic Analysis | |
| Indexing Fracture Toughness Data | |
| Inert-Gas Shielded Arc Welding of Ferrous Metal | |
| Instrumentation for The Evaluation of The Stability of The Welding Arc | |
| Intergranular Corrosion of Chromium-Nickel Stainless Steel \x96 Progress Report No. 1 | |
| Intermetallic Phase Precipitation in Duplex Stainless Steels and Weld Metals: Metallurgy, Influence on Properties, Welding and Testing Aspects | |
| Internal Pressure Design of Isolated Nozzles in Cylindrical Vessels With D/D Up to and Including 1.00 | |
| International Views on Reactor Pressure Vessel Integrity | |
| Interpretative Report Hardfacing and Wear | |
| Interpretive Report on Dynamic Analysis and Testing of Pressurized Components and Systems | |
| Interpretive Report on Nondestructive Examination Techniques, Procedure for Piping and Heavy Section Vessels | |
| Interpretive Report on Operating Conditions for Nuclear Pressure Vessels | |
| Interpretive Report on Weldability Tests for Hydrogen Cracking of Higher Strength Steels and Their Potential for Standardization | |
| Interpretive Report on Welding of Nickel-Clad and Stainless-Clad Steel Plate | |
| Interpretive Report on Welding Titanium and Titanium Alloys | |
| IPC Essential Document Collection for Board Design, Assembly and Manufacture | |
| ITU Statistical Yearbook - General Telecommunication Statistics | |
| Joining of 6061 Aluminum Matrix-Ceramic Particle Reinforced Composites | |
| Joint Venture Agreement for Professional Services | |
| Large Diameter Ratio Shell Intersections: Part 1, Part 2, & Part 3 | |
| Leak Testing of A Raised Face Weld Neck Flange | |
| Leakage and Emission Characteristics of Sheet Gaskets: Part 1 & Part 2 | |
| Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermoset ting-Resin Piping and Components Standards | |
| Literature Survey of Half-Bead, Temper-Bead, Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels | |
| Long Term Pressurized Graphite Gasketed Joint Tests: Part 1, Part 2, & Part 3 | |
| M(PERS-251/912 0500LD0132290) IN-SERVICE PROCUREMENT FOR APPOINTMENT UNDER THE ACTIVE AND RESERVE LIMITED DUTY OFFICER (LDO) AND CHIEF WARRANT OFFICER (CWO) PROGRAMS | |
| M\xc9THODES POUR L'\xc9PREUVE DE PRESSION DES BOUTEILLES \xc0 GAZ COMPRIM\xc9 | |
| Master S-N Curve Method for Fatigue Evaluation of Welded Components | |
| Material Specific Load Combination Factors for Option 2 FAD Curves | |
| Mechanical Properties of Cast Strengthened Nickel Base Superalloys | |
| Metal Fatigue in Operating Nuclear Power Plants | |
| Metallurgical Causes for the Occurrence of Creep Damage in Longitudinally Seam- Welded Cr-Mo High Energy Piping | |
| Metallurgical Characterization of the HAZ in A516-70 and Evaluation of Fracture Toughness Specimens and the Effect of Shallow Cracks in Weldments and the Development of CTOD Criteria; Comparison of the... | |
| Metallurgical Evaluation of Cast Duplex Stainless Steels and Their Weldments | |
| Metallurgical Studies of Steels for Sour Service Environments | |
| Method of Cement | |
| Method of Test for Modulus of Elasticity of Natural Building Stone | |
| Minimum Weld Spacing Requirements for API Above Ground Storage Tanks | |
| Modern Vanadium Steels for High Temperature Petroleum Reactors | |
| New Design Curves for Torispherical Heads; Elastic-Plastic Analysis of Shells of Revolution Under Axisymmetric Loading | |
| Nitrogen in Arc Welding - A Review | |
| Nomographs for The Solution of Beam-Column Problems Ultimate Strength Tables for Beam-Columns | |
| Non-Destructive Measurement and Analysis of Residual Stress in and Around Welds - A State of the Art Survey | |
| Non-Identical Flanges With Full-Face Elastic Gaskets | |
| NPS 4 Class 150 Bolted Joints Subjected to Pressure and External Bending Loads | |
| Nuclear Piping Criteria for Advanced Light-Water Reactors, Volume 1 - Failure Mechanisms and Corrective Actions | |
| Observations of Strains Near Reinforced and Non-Reinforced Cone Cylinder Intersections Discussion - \x93Design Formulas for A Thin Cylinder With Cone Shaped Ends\x94 | |
| OFFICIAL LIST A. P. I. PUBLICATIONS ON STANDARDS, CODES, AND POSTERS | |
| Optimized/Harmonized Room Temperature Leakage Test Procedure for Generation of ASME & CEN Code Gasket Factors \x96 Analytical Phase | |
| Overview of API 579-1/ASME Ffs-1 With An Emphasis on Data and Inspection Requirements | |
| Overview of the Business Continuity Solution Pack What\x92s in this pack, and how to access video content | |
| Owner/Consultant Agreement | |
| Papers Presented at the Conference on "Life of Pressure Vessels" Held by the French AFIAP in 1989 | |
| Performance of Steels in Hydrogen Charging Environments | |
| Piping System Sifs and Flexibility Analysis Criteria | |
| Plastic Analysis and Design of Square Rigid Frame Knees | |
| Plastic Analysis and Tests of Haunched Corner Connections | |
| Plastic Design of Pinned-Base \x93Lean To\x94 Frames | |
| Plastic Design of Pinned-Base Gable Frames | |
| Plastic Pipe: Burst and Fatigue Testing of Pvc and Hdpe Pipe | |
| Polytetrafluoroethyl ene (Ptfe) Gasket Qualification | |
| Position Paper on Nuclear Plant Pipe Supports | |
| Practical Aspects of Hydrogen Attack | |
| Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107 | |
| Preparation and Testing of Reagent Water in the Clinical Laboratory; Approved Guideline | |
| Programming and Control of Welding Processes - Experience of The U.S.S.R. | |
| Proof-Testing Pressure Vessels Designed for Internal Pressure | |
| Proposed Rules for Determining Allowable Compressive Stresses for Cylinders, Cones, Spheres and Formed Heads | |
| PVRC Position on Environmental Effects on Fatigue Life in Lwr Applications | |
| PVRC Research on Reinforcement of Openings in Pressure Vessels | |
| Recent Progress in Analysis of Welding Residual Stresses | |
| Recognition of UNS K91060 (Alloy 115, aka T115) Alloy in API 579-1/ASME FFS-1 and API Std 530 | |
| Recognition of UNS K91201 (Grade T/P 921 9Cr-2Si-1Cu) Alloy in API 579-1/ASME FFS-1 And API Std 530 | |
| Recognition of UNS S31740 (317AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 | |
| Recognition of UNS S34751 (347LN, Aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 | |
| Recognition of UNS S34752 (Advanced 347 AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 | |
| Recommendations for Design of Vessels for Elevated Temperature Service | |
| Recommendations for Determining Residual Stresses in Fitness-For-Service Assessment | |
| Recommendations for Establishing the Minimum Pressurization Temperature (MPT) for Equipment | |
| Recommendations for Evaluating Resistance to Brittle Fracture for Carbon and Low Alloy Steel Equipment and Piping | |
| Recommendations for Fatigue Design of Welded Joints and Components | |
| Recommendations Proposed By The PVRC Committee on Review of ASME Nuclear Codes and Standards | |
| Recommendations to ASME for Code Guidelines and Criteria for Continued Operation of Equipment | |
| Recommended Practices for Local Heating of Welds in Pressure Vessels | |
| Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987) - Volume IV - Special Topics | |
| Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987) Volume I - Current Status and Future Directions | |
| Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987) Volume II- Preliminary Design and Simplified Methods | |
| Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987) Volume III \x96 Inelastic Analysis | |
| Reduction of S-N Curves for Ship Structural Details | |
| Repair and Rehabilitation of Concrete Structures | |
| Repair Manual for Coke Drums | |
| Reports on Heat Treatment of Steels Used in Boiler and Pressure Vessel Applications: Report No. 1 Carbon Migration in Cr-MO Weldments Effect on Metallurgical Structure and Mechanical Properties Report No. | |
| Research in The U.S.S.R on Residual Stresses and Distortion in Welded Structures | |
| Research on Modern High Strength Low Alloy Steel Welding | |
| Research on Tubular Connections in Structural Work An Investigation of Welded Steel Pipe Connections | |
| Research Report on Characterization and Monitoring of Cracking in Wet H2S Service | |
| Review and Evaluation of The Toughness of Austenitic Steels and Nickel Alloys After Long-Term Elevated Temperature Exposures | |
| Review of Existing Fitness-For-Service Criteria for Crack-Like Flaws | |
| Review of Hydrogen Diffusivity, Solubility, and Permeability Coefficients and Recommended Values | |
| Revisiting The Bree Diagram: Derivation With Temperature Dependent Properties | |
| Roller Compacted Concrete Pavement | |
| Section C - Table of Contents Machine Screws, Set Screws, Weld Studs | |
| Service-Like Thermo-Mechanical Fatigue Characteristics of 1CrMoV Rotor Steel | |
| Simple Formulations to Evaluate Surface Impacts on Buried Steel Pipelines | |
| Simplified Methods for Creep-Fatigue Damage Evaluations and The Application to Life Extension | |
| Some Observations on The Brittle Fracture Problem | |
| Special Finite Elements for Piping Elbows and Bends at High Temperatures With Creep | |
| SPECIAL TRAINING AVAILABLE FOR LEADERS ON CONDUCT OF FOREMANSHIP TRAINING CONFERENCES | |
| Stainless Steel Weld Metal Prediction of Ferrite Content: An Update of WRC Bulletins 318 and 342 | |
| Standard Form of Teaming Agreement Between Team Manager and Team Member for the Purpose of Responding to a Solicitation and Pursuing a Project | |
| STANDARD GUIDE FOR ESTABLISHING A QUALITY ASSURANCE PROGRAM FOR ANALYTICAL CHEMISTRY LABORATORIES WITHIN THE NUCLEAR INDUSTRY | |
| STANDARD GUIDE FOR ESTABLISHING AND MAINTAINING A QUALITY ASSURANCE PROGRAM FOR ANALYTICAL LABORATORIES WITHIN THE NUCLEAR INDUSTRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry | |
| Standard Guide for Selection or Specification of Electrodeless Conductivity Instruments for the Nuclear Fuel Cycle | |
| Standard Matrix for Light Water Reactor Fuel Reprocessing | |
| Standard Matrix for LWR Spent Fuel Receiving and Storage | |
| STANDARD METHOD FOR RADIOCHEMICAL DETERMINATION OF PLUTONIUM IN SOIL BY ALPHA SPECTROSCOPY | |
| STANDARD METHOD FOR RADIOCHEMICAL DETERMINATION OF URANIUM ISOTOPES IN SOIL BY ALPHA SPECTROMETRY | |
| STANDARD METHOD OF SAMPLING AND TESTING GROUT | |
| Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation | |
| STANDARD PRACTICE FOR INSTALLATION OF CELLULOSIC AND MINERAL FIBERLOOSE-FILL THERMAL INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR INSTALLATION OF CELLULOSIC AND MINERAL FIBERLOOSE-FILL THERMAL INSULATION | |
| STANDARD PRACTICE FOR LABELING CERAMIC ART MATERIALS FOR CHRONIC ADVERSE HEALTH HAZARDS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR LABELING CERAMIC ART MATERIALS FOR CHRONIC ADVERSE HEALTH HAZARDS | |
| STANDARD PRACTICE FOR LABORATORIES ENGAGED IN TESTING OF BUILDING SEALANTS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR LABORATORIES ENGAGED IN TESTING OF BUILDING SEALANTS | |
| STANDARD SPECIFICATION FOR CHEMICAL ADMIXTURES FOR USE IN PRODUCING FLOWING CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CHEMICAL ADMIXTURES FOR USE IN PRODUCING FLOWING CONCRETE | |
| Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR INSTALLATION OF LOAD BEARING (TRANSVERSE AND AXIAL) STEEL STUDS AND RELATED ACCESSORIES | |
| STANDARD SPECIFICATION FOR MEMBRANE-FACED RIGID CELLULAR POLYURETHANE ROOF INSULATION | |
| Standard Specification for NATURAL CEMENT | |
| STANDARD SPECIFICATION FOR NUCLEAR GRADE ALUMINUM OXIDE POWDER | |
| STANDARD SPECIFICATION FOR NUCLEAR-GRADE ALUMINUM OXIDE POWDER - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Nuclear-Grade Aluminum Oxide Powder | |
| STANDARD SPECIFICATION FOR REFERENCE MASSES AND DEVICES FOR DETERMINING MASS AND VOLUME FOR USE IN PHYSICAL TESTING OF HYDRAULIC CEMENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements | |
| STANDARD SPECIFICATION FOR SINTERED (URANIUM- PLUTONIUM) DIOXIDE PELLETS - FAST REACTOR FUEL | |
| STANDARD SPECIFICATION FOR SPRAY-APPLIED MINERAL FIBER THERMAL AND SOUND ABSORBING INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation | |
| STANDARD SPECIFICATION FOR SPRAY-APPLIED MINERAL FIBER THERMAL OR ACOUSTICAL INSULATION (E1-1986) | |
| Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR SPRAY-APPLIED RIGID CELLULAR POLYURETHANE THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM BOARD | |
| Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases | |
| STANDARD SPECIFICATION FOR STEEL SELF-PIERCING TAPPING SCREWS FOR APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL STUDS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs | |
| STANDARD SPECIFICATION FOR WEIGHTS AND WEIGHING DEVICES FOR USE IN THE PHYSICAL TESTING OF HYDRAULIC CEMENTS | |
| Standard Specification for Woven Wire Plaster Base - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR WOVEN WIRE PLASTER BASE | |
| Standard Teat Method for EVALUATING THE STATIC COEFFICIENT OF FRICTION OF CERAMIC TILE AND OTHER LIKE SURFACES BY THE HORIZONTAL DYNAMOMETER PULL METER METHOD | |
| STANDARD TEST METHOD FOR DETERMINATION OF PLUTONIUM ISOTOPIC COMPOSITION BY GAMMA-RAY SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR DETERMINATION OF PLUTONIUM ISOTOPIC COMPOSITION BY GAMMA-RAY SPECTROMETRY | |
| STANDARD TEST METHOD FOR DETERMINATION OF WATER ABSORPTION BY SEALANT BACKUP (JOINT-FILLER) MATERIAL | |
| STANDARD TEST METHOD FOR DETERMINATION OF WATER ABSORPTION OF SEALANT BACKING (JOINT FILLER) MATERIAL - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material | |
| Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method | |
| STANDARD TEST METHOD FOR DETERMINING VISIBLE ABRASION RESISTANCE OF GLAZED CERAMIC TILE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR DETERMINING VISIBLE ABRASION RESISTANCE OF GLAZED CERAMIC TILE | |
| STANDARD TEST METHOD FOR FLEXURAL TOUGHNESS AND FIRST-CRACK STRENGTH OF FIBER-REINFORCED CONCRETE (USING BEAM WITH THIRD-POINT LOADING) | |
| Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear | |
| STANDARD TEST METHOD FOR LENGTH CHANGE OF HYDRAULIC-CEMENT MORTARS EXPOSED TO A MIXED SODIUM AND MAGNESIUM SULFATE SOLUTION | |
| Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution | |
| Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling | |
| STANDARD TEST METHOD FOR MEASURING THE RESISTANCE OF CERAMIC TILE TO FREEZE-THAW CYCLING | |
| STANDARD TEST METHOD FOR MODULUS OF RUPTURE IN BENDING OF ELECTRODE GRAPHITE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR MODULUS OF RUPTURE IN BENDING OF ELECTRODE GRAPHITE | |
| STANDARD TEST METHOD FOR RADIOCHEMICAL DETERMINATION OF PLUTONIUM IN SOIL BY ALPHA SPECTROSCOPY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy | |
| STANDARD TEST METHOD FOR RADIOCHEMICAL DETERMINATION OF URANIUM ISOTOPES IN SOIL BY ALPHA SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry | |
| Standard Test Method for Sampling and Testing Grout for Masonry - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Sampling and Testing Grout for Masonry | |
| Standard Test Method for Sampling and Testing Grout | |
| STANDARD TEST METHOD FOR SPLITTING TENSILE STRENGTH OF MASONRY UNITS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR SPLITTING TENSILE STRENGTH OF MASONRY UNITS | |
| Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically | |
| Standard Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box | |
| STANDARD TEST METHODS FOR CHEMICAL AND ATOMIC ABSORPTION ANALYSIS OF URANIUM-ORE CONCENTRATE (R 1990) | |
| STANDARD TEST METHODS FOR CHEMICAL AND ATOMIC ABSORPTION ANALYSIS OF URANIUM-ORE CONCENTRATE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate | |
| Standardization of Fatigue Methods for Use in API 579-1/ASME FFS-1 | |
| Standardized Flexibility Factor Method and Piping Burst and Cyclic Moment Tests for Induction Bends and 6061-T6 and SS 304 Transition Joints: Report 1, Report 2, & Report 3 | |
| Strength of Aluminum Alloy 6061-T4 Thick-Walled Cylindrical Vessels Subjected to Internal Pressures | |
| Strength of Thick-Walled Cylindrical Vessels Under Internal Pressure for Three Steels | |
| Stress Corrosion Cracking of Stainless Steels - Part I: Practical Experiences - Part II: An Investigation of The Suitability of The U-Bend Specimen | |
| Stress Indices, Pressure Design and Stress Intensification Factors for Laterals in Piping | |
| Stress Intensity and Crack Growth Opening Area Solutions for Through-Wall Cracks in Cylinders and Spheres | |
| Stress or Strain Criteria for Combined Static and Dynamic Loading | |
| Stress Redistribution Due to Inelastic Strains in Thick or Thin-Walled Cylinder, Spherical and Conical Shells | |
| Stresses in A Spherical Vessel From Radial Loads Acting on A Pipe Stresses in A Spherical Vessel From External Moments Acting on A Pipe Influence of A Reinforcing Pad on... | |
| Stresses in Intersecting Cylinders Subjected to Pressure | |
| Stresses in Spherical Vessels From Local Loads Transferred By A Pipe Additional Data on Stresses in Cylindrical Shells Under Local Loading | |
| Stresses Near A Cylindrical Outlet in A Spherical Vessel Effects of External Loadings on Large Outlets in A Cylindrical Pressure Vessel | |
| Structural Welding Code Steel Bundled Set A; Including Standard Welding Symbols, Terms, and Definitions. Aisc Steel Building Structures, Structural Welding Code Steel | |
| Stud and Nut Structural Tension Capacity Matching | |
| Studies of Cladding and Overlay for Pressure Vessel Service | |
| Studies of High Temperature Hydrogen Related Damage in Welded Carbon Steel Components Used in Refineries | |
| Studies of Local Differences in Material Creep Properties on Weldments: Part 1 & Part 2 | |
| Suitable Heating Conditions in Local Post Weld Heat Treatment | |
| Summary of Gasket Steam Leakage Tests; Part 1: Gasket Steam Leakage Tests; Part 2: Leak Tests Conducted on Graphite Gaskets; Part 3: Long Duration Air and Steam Screening Tests on... | |
| Technologies for The Evaluation of Non-Crack-Like Flaws in Pressurized Components - Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges and Dents | |
| Ten Years of Progress in Pressure Vessel Research | |
| TEST METHOD FOR FLEXURAL TOUGHNESS AND FIRST-CRACK STRENGTH OF FIBER-REINFORCED CONCRETE (USING BEAM WITH THIRD-POINT LOADING) | |
| Test Methods for Hydrogen Induced Cracking | |
| Test Protocol Guidelines for Gasket Materials | |
| Testing Pressure Vessels Effect of Welding on Pressure Vessel Steels | |
| Tests of Columns Under Combined Thrust and Moment | |
| The a-O Loss of Containment Model for HTHA with Guidelines for FFS | |
| The a\x96O HTHA Model and the Time-Dependent Prager Curves | |
| The Design of Thick-Walled Closed-Ended Cylinders Based on Torsion Data | |
| The Effect of Crack Depth to Specimen Width Ratio on The Elastic-Plastic Fracture Toughness of A High-Strength Low-Strain Hardening Steel | |
| The Effect of Post Weld Heat Treatment and Notch Toughness on Welded Joints and on Normalized Base-Metal Properties of A516 Steel | |
| The Effects of Internal Pressure on Thin-Shell Pressure Vessel Heads Wrinkling of A Large Thin Code Head Under Internal Pressure Biaxial Stress Criteria for Large Low-Pressure Tanks | |
| The Influence of Consumable Composition and Solidification on Inclusion Formation and Growth in Low Carbon Steel Underwater Wet Welds | |
| The Influence of Residual Stress on The Strength of Structural Members | |
| The Master S-N Curve Method: An Implementation for Fatigue Evaluation of Welded Components in The ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FFS-1 | |
| The Mpc Lot-Centered Analysis Method for Determining High Temperature Strength Parameters | |
| The Role of Welded Joint Vulnerability and Various Damage Mechanisms Active in Process and Petrochemical Plants: Reliability Analysis With Risk Based Inspection (Rbi) Approach | |
| The Significance of The A/W Ratio on Fracture Toughness of A-36 Steel | |
| The Susceptibility of Process Equipment and Steels to Cracking in Aqueous Hydrogen Charging Environments | |
| The Tensile Properties of Selected Steels As A Function of Temperature | |
| The Value of The Notch Tensile Test | |
| Theoretical Stresses Near A Circular Opening in A Flat Plate Reinforced With A Cylindrical Outlet Stresses in Contoured Openings of Pressure Vessels A Three-Dimensional Photoelastic Study of Stresses Around Reinforced... | |
| Thermal Fatigue \x96 A Critical Review | |
| Tilt-Up Construction | |
| Toughness, Fracture and Fitness for Hydrogen Service | |
| Ultra-High Strength Weld Metal With Low-Hydrogen Electrodes | |
| Understanding Welds in Elevated Temperature Service | |
| Underwater Wet Welding of Steel | |
| Unmixed Zone in Arc Welds: Significance on Corrosion Resistance of High Molybdenum Stainless Steels | |
| Updating The Master S-N Curve to Account for Run-Out Data | |
| Use of Low Carbon 1-1/4Cr-1/2Mo Weld Metal for Fabrication of Cr-Mo Components | |
| Using Finite Element Analysis to Determine Piping Elbow Bending Moment (B2) Stress Indices | |
| Using standards to implement a business continuity management system A guide to using the resources in this Solution Pack to implement a system for managing organizational continuity | |
| Vanadium and Columbium Additions in Pressure Vessel Steels | |
| Vibration Damping of Heat Exchanger Tube Bundles in Two-Phase Flow; Acoustic Resonance in Heat Exchanger Tube Bundles | |
| Vocation Training Courses Applicable to the Drilling and Production Industry | |
| Web Buckling Tests on Welded Plate Girders | |
| Weld Residual Stress Estimate for FFS Assessment and Evaluation of Local PWHT Procedures | |
| Weldability and Hot Ductility Behavior of Nuclear Grade Austenitic Stainless Steels | |
| Weldability of Low-Carbon Micro-Alloyed Steels for Marine Structures | |
| Welded Interior Beam-To-Column Connections Transfer of Stresses in Welded Cover Plates A Survey of Literature on The Lateral Instability of Beams | |
| Welding of Reactive and Refractory Metals | |
| Welding of Steel at Low Ambient Temperatures | |
| Welding Type 347 Stainless Steel - An Interpretive Report | |
| Welding Ultra High Strength Steel Sheet | |
| White Paper on Reactor Vessel Integrity Requirements for Level A and B Conditions |
| << Prev | Next >> |