Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
100
150
200
250
300
350
370
380
390
400
410
420
422
423
424
425
426
427
428
429
430
431
432
433
434
440
450
460
470
480
490
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| American National Standard for Test Switches for Transformer-Rated Meters | |
| American National Standard Requirements for Watthour Meter Sockets | |
| American National Standard Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters | |
| ASTM ELEARNING: C117 Standard Test Method for Materials finer than 75-\xb5m (No. 200) Sieve in Mineral Aggregates by Washing: SINGLE-USER LICENSE | |
| ASTM ELEARNING: C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration: SINGLE-USER LICENSE | |
| ASTM ELEARNING: C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders: SINGLE-USER LICENSE | |
| ASTM ELEARNING: C1231/C1231M: Section 7 Microlearning: SINGLE-USER LICENSE | |
| ASTM ELEARNING: C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorbtion of Coarse Aggregate: SINGLE-USER LICENSE | |
| ASTM ELEARNING: C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorbtion of Fine Aggregate: SINGLE-USER LICENSE | |
| Case Study: Palmer Events Center | |
| CODE FOR ELECTRICITY METERING | |
| Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity Meters | |
| Electric Connectors - Connectors for Use between Aluminum-To-Aluminum or Aluminum-To-Copper Bare Overhead Conductors | |
| Electric Connectors - Sealed Insulated Underground Connector Systems Rated 600 Volts | |
| Electric Connectors \x97 Testing Methods and Equipment Common to the ANSI C119 Family of Standards | |
| Electric Connectors Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors | |
| Electric Connectors\x97 Insulation Piercing Connector Systems, Rated 600 Volts or Less (Low-Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires) | |
| Electric Meters\x97 Test Requirements for Meters Equipped with Service Switches | |
| Electricity Metering Solid-State Demand Registers for Electromechanical Watthour Meters | |
| Electricity Metering Solid-State Electricity Meters | |
| Electricity Meters 0.2 and 0.5 Accuracy Classes | |
| Electricity Meters for the Measurement of DC Energy | |
| Field Testing of Electricity Meters | |
| Guide for the Measurement of Voltage, Current, Power, Energy, and Power Factor | |
| Instrument Transformers for Metering Purposes, 15 kV Less | |
| Marking and Arrangement of Terminals for Phase-Shifting Devices Used in Metering | |
| Method of Test for Flow of Portland-Cement Concrete by Use of the Flow Table | |
| Metric Oval 90 Degree Countersunk Head Type 1A Cross Recess Machine Screws | |
| Metric Pan Head Type 1A Cross Recess Machine | |
| PRACTICES FOR INSPECTION OF COMPRESSED GAS CYLINDERS AT TIME OF MANUFACTURE | |
| Protocol Specification for ANSI Type 2 Optical Port | |
| Protocol Specification For Interfacing to Data Communication Networks | |
| Protocol Specification for Telephone Modem Communication | |
| Qualification Procedure for Acetylene Cylinder Design | |
| Recommended Practices for Resistance Welding | |
| Recommended Practices for Spot Welding Aluminium and Aluminium Alloys | |
| Standard Classification for Advanced Ceramics | |
| STANDARD DEFINITIONS OF TERMS RELATING TO DIMENSION STONE (E1-1990) | |
| STANDARD DEFINITIONS OF TERMS RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS | |
| Standard for Magnetic Tape Pulse Recorders for Electricity Meters | |
| Standard for Mechanical Demand Registers | |
| STANDARD GUIDE FOR DESIGN OF EQUIPMENT FOR PROCESSING NUCLEAR AND RADIOACTIVE MATERIALS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials | |
| STANDARD GUIDE FOR DESIGN, SELECTION, AND INSTALLATION OF EXTERIOR DIMENSION STONE ANCHORS AND ANCHORING SYSTEMS | |
| STANDARD GUIDE FOR DETERMINATION OF SPECIFIC SURFACE AREA BY GAS ADSORPTION | |
| STANDARD GUIDE FOR ESTABLISHING A MEASUREMENT SYSTEM QUALITY CONTROL PROGRAM FOR ANALYTICAL CHEMISTRY LABORATORIES WITHIN NUCLEAR INDUSTRY - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD GUIDE FOR ESTABLISHING A MEASUREMENT SYSTEM QUALITY CONTROL PROGRAM FOR ANALYTICAL CHEMISTRY LABORATORIES WITHIN THE NUCLEAR INDUSTRY | |
| Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities | |
| Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment | |
| STANDARD GUIDE FOR ESTABLISHING SURVEILLANCE TEST PROGRAM FOR BORON-BASED NEUTRON ABSORBING MATERIAL SYSTEMS FOR USE IN NUCLEAR FUEL STORAGE RACKS IN POOL ENVIRONMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment | |
| Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks | |
| Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors | |
| Standard Guide for Installation of Walk- Through Metal Detectors | |
| Standard Guide for Installation of Walk-Through Metal Detectors - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Installation of Walk-Through Metal Detectors | |
| Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry | |
| STANDARD GUIDE FOR SECONDARY SEAL FOR SEALED INSULATING GLASS UNITS FOR STRUCTURAL SEALANT GLAZING APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications | |
| Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems | |
| Standard Guide for Use of Joint Sealants - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Use of Joint Sealants | |
| Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors | |
| STANDARD GUIDE TO PROCEDURES FOR CALIBRATING AUTOMATIC PEDESTRIAN SNM MONITORS | |
| Standard Practice for Adjusting the Operational Sensitivity Setting of in-Plant Walk-Through Metal Detectors | |
| Standard Practice for Detection Sensitivity Mapping of in-Plant Walk-Through Metal Detectors | |
| STANDARD PRACTICE FOR DETERMINING EQUIVALENT BORON CONTENTS OF NUCLEAR MATERIALS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials | |
| STANDARD PRACTICE FOR ELECTRODEPOSITION OF THE ACTINIDES FOR ALPHA SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry | |
| STANDARD PRACTICE FOR EVALUATION OF LABORATORIES TESTING HYDRAULIC CEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR EVALUATION OF LABORATORIES TESTING HYDRAULIC CEMENT | |
| Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids | |
| STANDARD PRACTICE FOR INSTALLING CLAY FLUE LINING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Installing Clay Flue Lining | |
| STANDARD PRACTICE FOR INSTALLING VITRIFIED CLAY PIPE LINES | |
| Standard Practice for Interpreting Glass Fracture Surface Features - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Interpreting Glass Fracture Surface Features | |
| STANDARD PRACTICE FOR LOCATION OF TEST SPECIMENS FROM MAGNESIA-CARBON AND IMPREGNATED BURNED BASIC BRICK - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick | |
| STANDARD PRACTICE FOR LOCATION OF TEST SPECIMENS FROM TAR BONDED, MAGNESITE-CARBON AND BURNED IMPREGNATED BASIC BRICK | |
| Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations | |
| STANDARD PRACTICE FOR PREPARING COUPONS FOR FLEXURAL AND WASHOUT TESTS ON GLASS-FIBER REINFORCED CONCRETE (GFRC) | |
| Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR REPORTING UNIAXIAL STRENGTH DATA AND ESTIMATING WEIBULL DISTRIBUTION PARAMETERS FOR ADVANCED CERAMICS | |
| Standard Practice for Safe Spraying of Ceramic Glazes | |
| Standard Practice for Safe Use and Handling of Ceramic Clays and Slips | |
| STANDARD PRACTICE FOR TENSILE STRENGTH OF MONOLITHIC ADVANCED CERAMICS AT AMBIENT TEMPERATURES | |
| Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders | |
| STANDARD PRACTICE FOR USE OF UNBONDED CAPS IN DETERMINATION OF COMPRESSIVE STRENGTH OF HARDENED CYLINDRICAL CONCRETE SPECIMENS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR USE OF UNBONDED CAPS IN DETERMINATION OF COMPRESSIVE STRENGTH OF HARDENED CYLINDRICAL CONCRETE SPECIMENS | |
| Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing | |
| Standard Specification for Application of Gypsum Sheathing Board | |
| Standard Specification for Application of Gypsum Sheathing | |
| STANDARD SPECIFICATION FOR CERAMIC GLAZED STRUCTURAL CLAY FACING TILE, FACING BRICK, AND SOLID MASONRY UNITS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CERAMIC GLAZED STRUCTURAL CLAY FACING TILE, FACING BRICK, AND SOLID MASONRY UNITS | |
| Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel | |
| STANDARD SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE (METRIC) (R 1988) | |
| STANDARD SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE (METRIC) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric) | |
| Standard Specification for Concrete Pipe for Irrigation or Drainage - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric] | |
| STANDARD SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE | |
| STANDARD SPECIFICATION FOR DISCRETE NON-ASBESTOS FIBER-CEMENT INTERIOR SUBSTRATE SHEETS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR DISCRETE NON-ASBESTOS FIBER-CEMENT INTERIOR SUBSTRATE SHEETS | |
| Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board | |
| STANDARD SPECIFICATION FOR FIBER-CEMENT ROOFING SHINGLES, SHAKES, AND SLATES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates | |
| Standard Specification for Fiber-Reinforced Gypsum Panel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Fiber-Reinforced Gypsum Panel | |
| STANDARD SPECIFICATION FOR FIBER-REINFORCED GYPSUM PANELS | |
| STANDARD SPECIFICATION FOR FIREBOX BRICK FOR RESIDENTIAL FIREPLACES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FIREBOX BRICK FOR RESIDENTIAL FIREPLACES | |
| STANDARD SPECIFICATION FOR FLAT FIBER-CEMENT SHEETS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Flat Fiber-Cement Sheets | |
| STANDARD SPECIFICATION FOR FLAT NON-ASBESTOS FIBER-CEMENT SHEETS | |
| STANDARD SPECIFICATION FOR FLEXIBLE FIBROUS GLASS BLANKET INSULATION USED TO EXTERNALLY INSULATE HVAC DUCTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts | |
| STANDARD SPECIFICATION FOR GLASS MAT WATER- RESISTANT GYPSUM BACKING BOARD | |
| Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel | |
| STANDARD SPECIFICATION FOR HEAVY VEHICULAR PAVING BRICK - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HEAVY VEHICULAR PAVING BRICK | |
| STANDARD SPECIFICATION FOR NON-ASBESTOS FIBER- CEMENT ROOFING SHINGLES, SHAKES, AND SLATES | |
| STANDARD SPECIFICATION FOR NONLOADBEARING CONCRETE MASONRY UNITS | |
| Standard Specification for Precast Concrete Septic Tanks - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR PRECAST CONCRETE SEPTIC TANKS | |
| STANDARD SPECIFICATION FOR PREFORMED TAPE SEALANTS FOR GLAZING APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Preformed Tape Sealants for Glazing Applications | |
| STANDARD SPECIFICATION FOR REFLECTIVE INSULATION FOR BUILDING APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Reflective Insulation for Building Applications | |
| STANDARD SPECIFICATION FOR SAMPLING, INSPECTION, REJECTION, CERTIFICATION, PACKAGING, MARKING, SHIPPING, HANDLING, AND STORAGE OF GYPSUM BOARD | |
| Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products | |
| STANDARD SPECIFICATION FOR SHIELDED COUPLINGS JOINING HUBLESS CAST IRON SOIL PIPE AND FITTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| Standard Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout | |
| STANDARD SPECIFICATION FOR SILICA FUME FOR USE IN HYDRAULIC-CEMENT CONCRETE AND MORTAR | |
| STANDARD SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Silica Fume Used in Cementitious Mixtures | |
| STANDARD SPECIFICATION FOR STRUCTURAL SILICONE SEALANTS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STRUCTURAL SILICONE SEALANTS | |
| STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE AND JOINTS FOR USE IN JACKING, SLIPLINING, AND IN TUNNELS (METRIC) | |
| STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE AND JOINTS FOR USE IN JACKING, SLIPLINING, AND TUNNELS | |
| STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE AND JOINTS FOR USE IN MICROTUNNELING, SLIPLINING, PIPE BURSTING, AND TUNNELS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels | |
| Standard Terminology for Masonry - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Terminology of Concrete Masonry Units and Related Units | |
| STANDARD TERMINOLOGY OF CONCRETE MASONRY UNITS | |
| STANDARD TERMINOLOGY OF MASONRY | |
| Standard Terminology of Mortar and Grout for Unit Masonry - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Terminology of Mortar and Grout for Unit Masonry | |
| STANDARD TERMINOLOGY OF MORTAR FOR UNIT MASONRY | |
| Standard Terminology Relating to Concrete and Concrete Aggregates - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TERMINOLOGY RELATING TO CONCRETE AND CONCRETE AGGREGATES | |
| Standard Terminology Relating to Dimension Stone - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TERMINOLOGY RELATING TO DIMENSION STONE | |
| Standard Terminology Relating to Gypsum and Related Building Materials and Systems - INCLUDES STANDARD + REDLINE (PDF) | |
|
Standard Terminology Relating to Gypsum and Related Building Materials and Systems -- C11 REV A (RL)
|
STANDARD TERMINOLOGY RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS |
| Standard Terminology Relating to Precast Concrete Products | |
| STANDARD TEST METHOD FOR ABSORPTION OF ARCHITECTURAL CAST STONE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Absorption of Architectural Cast Stone | |
| Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants | |
| Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants | |
| STANDARD TEST METHOD FOR ADVANCED CERAMIC SPECIFIC SURFACE AREA BY PHYSICAL ADSORPTION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ADVANCED CERAMIC SPECIFIC SURFACE AREA BY PHYSICAL ADSORPTION | |
| STANDARD TEST METHOD FOR ANALYSIS OF URANIUM AND THORIUM IN SOILS BY ENERGY DISPERSIVE X-RAY FLUORESCENCE SPECTROSCOPY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy | |
| Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials | |
| Standard Test Method for Compressive Strength of Architectural Cast Stone - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Compressive Strength of Architectural Cast Stone | |
| Standard Test Method for Concrete Aggregates by Determination of Length Change of Concrete Due to Alkali-Silica Reaction | |
| STANDARD TEST METHOD FOR CONCRETE PIPE SEWERLINES BY NEGATIVE AIR PRESSURE (VACUUM) TEST METHOD (METRIC) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric) | |
| STANDARD TEST METHOD FOR CONCRETE PIPE SEWERLINES BY NEGATIVE AIR PRESSURE (VACUUM) TEST METHOD - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR CONCRETE PIPE SEWERLINES BY NEGATIVE AIR PRESSURE (VACUUM) TEST METHOD | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test (Metric) | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric) | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric] | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill | |
| Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test | |
| Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate | |
| Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate | |
| STANDARD TEST METHOD FOR DETERMINATION OF GLASS- FIBER CONTENT IN GLASS FIBER REINFORCED CONCRETE (GFRC) (WASH- OUT TEST) | |
| STANDARD TEST METHOD FOR DETERMINATION OF IMPURITIES IN NUCLEAR GRADE URANIUM COMPOUNDS BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry | |
| STANDARD TEST METHOD FOR DETERMINATION OF IMPURITIES IN URANIUM DIOXIDE BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY | |
| Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction | |
| Standard Test Method for Determination of Length Change of Concrete Due to AlkaliSilica Reaction - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determination of Length Change of Concrete Due to AlkaliSilica Reaction | |
| STANDARD TEST METHOD FOR DETERMINATION OF URANIUM IN MINERAL ACIDS BY X-RAY FLUORESCENCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence | |
| Standard Test Method for Determining Bond Strength between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test) | |
| Standard Test Method for Determining Bond Strength between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test | |
| Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) | |
| STANDARD TEST METHOD FOR DETERMINING THE OUTGASSING POTENTIAL OF SEALANT BACKING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determining the Outgassing Potential of Sealant Backing | |
| Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation | |
| STANDARD TEST METHOD FOR DETERMINING THE PARTICLE SIZE DISTRIBUTION OF ALUMINA BY CENTRIFUGAL PHOTOSEDIMENTATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation | |
| STANDARD TEST METHOD FOR DETERMINING THE TENSILE PROPERTIES OF AN INSULATING GLASS EDGE SEAL FOR STRUCTURAL GLAZING APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications | |
| STANDARD TEST METHOD FOR DURABILITY OF SEALANTS EXPOSED TO CONTINUOUS IMMERSION IN LIQUIDS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids | |
| STANDARD TEST METHOD FOR DYNAMIC YOUNG'S MODULUS, SHEAR MODULUS, AND POISSON'S RATIO FOR ADVANCED CERAMICS BY IMPULSE EXCITATION OF VIBRATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR DYNAMIC YOUNG'S MODULUS, SHEAR MODULUS, AND POISSON'S RATIO FOR ADVANCED CERAMICS BY SONIC RESONANCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Dynamic Young\x92s Modulus, Shear Modulus, and Poisson\x92s Ratio for Advanced Ceramics by Impulse Excitation of Vibration | |
| Standard Test Method for Dynamic Young\x92s Modulus, Shear Modulus, and Poisson\x92s Ratio for Advanced Ceramics by Sonic Resonance | |
| STANDARD TEST METHOD FOR DYNAMIC YOUNG\xb4S MODULUS, SHEAR MODULUS, AND POISSON\xb4S RATIO FOR ADVANCED CERAMICS BY IMPULSE EXCITATION OF VIBRATION | |
| STANDARD TEST METHOD FOR DYNAMIC YOUNG\xb4S MODULUS, SHEAR MODULUS, AND POISSON\xb4S RATIO FOR ADVANCED CERAMICS BY SONIC RESONANCE | |
| STANDARD TEST METHOD FOR EFFECTS OF HEAT AGING ON WEIGHT LOSS, CRACKING, AND CHALKING OF ELASTOMERIC SEALANTS AFTER CURE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR EFFECTS OF HEAT AGING ON WEIGHT LOSS, CRACKING, AND CHALKING OF ELASTOMERIC SEALANTS AFTER CURE | |
| STANDARD TEST METHOD FOR ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION (AASHTO T277) | |
| Standard Test Method for Electrical Indication of Concrete\x92s Ability to Resist Chloride Ion Penetration - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Electrical Indication of Concrete\x92s Ability to Resist Chloride Ion Penetration | |
| STANDARD TEST METHOD FOR ELEVATED TEMPERATURE AND HUMIDITY RESISTANCE OF VAPOR RETARDERS FOR INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation | |
| Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ELEVATED TEMPERATURE TENSILE CREEP STRAIN, CREEP STRAIN RATE, AND CREEP TIME TO FAILURE FOR MONOLITHIC ADVANCED CERAMICS | |
| Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-To-Failure for Advanced Monolithic Ceramics | |
| Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Monolithic Advanced Ceramics | |
| STANDARD TEST METHOD FOR EVALUATING THE FREEZE- THAW DURABILITY OF MANUFACTURED CONCRETE MASONRY UNITS AND RELATED CONCRETE UNITS | |
| Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units | |
| Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units | |
| Standard Test Method for Extrusion Rate of Elastomeric Sealants - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Extrusion Rate of Elastomeric Sealants | |
| STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF ADVANCED CERAMICS AT ELEVATED TEMPERATURES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures | |
| Standard Test Method for Flow Characteristics of Preformed Tape Sealants - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR FLOW CHARACTERISTICS OF PREFORMED TAPE SEALANTS | |
| STANDARD TEST METHOD FOR IN SITU COMPRESSIVE STRESS WITHIN SOLID UNIT MASONRY ESTIMATED USING FLATJACK MEASUREMENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR IN SITU COMPRESSIVE STRESS WITHIN SOLID UNIT MASONRY ESTIMATED USING FLATJACK MEASUREMENTS | |
| STANDARD TEST METHOD FOR IN SITU MEASUREMENT OF MASONRY DEFORMABILITY PROPERTIES USING THE FLATJACK METHOD - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR IN SITU MEASUREMENT OF MASONRY DEFORMABILITY PROPERTIES USING THE FLATJACK METHOD | |
| Standard Test Method for Lightweight Particles in Aggregate - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR LIGHTWEIGHT PARTICLES IN AGGREGATE | |
| Standard Test Method for Materials Finer than 75-\xb5m (No. 200) Sieve in Mineral Aggregates by Washing | |
| STANDARD TEST METHOD FOR MATERIALS FINER THAN 75-MUEM (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measuring the Steady State Thermal Transmittance of Fenestration Systems Using Hot Box Methods | |
| STANDARD TEST METHOD FOR MEASURING THE STEADY-STATE THERMAL TRANSMITTANCE OF FENESTRATION SYSTEMS USING HOT BOX METHODS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods | |
| Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer | |
| Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature | |
| STANDARD TEST METHOD FOR NON-DESTRUCTIVE PHOTOELASTIC MEASUREMENT OF EDGE AND SURFACE STRESSES IN ANNEALED, HEAT-STRENGTHENED, AND FULLY TEMPERED FLAT GLASS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass | |
| STANDARD TEST METHOD FOR NONDESTRUCTIVE ANALYSIS OF SPECIAL NUCLEAR MATERIALS IN HOMOGENEOUS SOLUTIONS BY GAMMA-RAY SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR NONDESTRUCTIVE ANALYSIS OF SPECIAL NUCLEAR MATERIALS IN HOMOGENEOUS SOLUTIONS BY GAMMA-RAY SPECTROMETRY | |
| STANDARD TEST METHOD FOR NONDESTRUCTIVE ASSAY OF PLUTONIUM IN SCRAP AND WASTE BY PASSIVE NEUTRON COINCIDENCE COUNTING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting | |
| STANDARD TEST METHOD FOR NONVOLATILE CONTENT OF COLD LIQUID-APPLIED ELASTOMERIC WATERPROOFING MEMBRANES | |
| STANDARD TEST METHOD FOR OXIDATION MASS LOSS OF MANUFACTURED CARBON AND GRAPHITE MATERIALS IN AIR - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air | |
| STANDARD TEST METHOD FOR PERFORMING TENSION TESTS ON GLASS-FIBER REINFORCED CONCRETE (GFRC) BONDING PADS | |
| Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration | |
| STANDARD TEST METHOD FOR PLUTONIUM BY TITANIUM (III)/CERIUM(IV) TITRATION | |
| Standard Test Method for Plutonium by Titanium(III)/Cerium (IV) Titration | |
| Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) | |
| Standard Test Method for Preparation of Oils and Oily Waste Samples by High-Pressure, High- Temperature Digestion for Trace Element Determinations | |
| Standard Test Method for Quantitative Determination of 241 Am in Plutonium by Gamma-Ray Spectrometry | |
| STANDARD TEST METHOD FOR QUANTITATIVE DETERMINATION OF 241AM IN PLUTONIUM BY GAMMA-RAY SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR QUANTITATIVE DETERMINATION OF 241AM IN PLUTONIUM BY GAMMA-RAY SPECTROMETRY | |
| Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel | |
| Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR RELATIVE DENSITY (SPECIFIC GRAVITY) AND ABSORPTION OF COARSE AGGREGATE | |
| Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR RELATIVE DENSITY (SPECIFIC GRAVITY) AND ABSORPTION OF FINE AGGREGATE | |
| Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc | |
| STANDARD TEST METHOD FOR SHEAR STRENGTH OF CONTINUOUS FIBER-REINFORCED ADVANCED CERAMICS AT AMBIENT TEMPERATURES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures | |
| Standard Test Method for Soluble Chlorides in Asbestos | |
| STANDARD TEST METHOD FOR STAINING OF POROUS SUBSTRATE BY JOINT SEALANTS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR STAINING OF POROUS SUBSTRATE BY JOINT SEALANTS | |
| STANDARD TEST METHOD FOR STATIC LEACHING OF MONOLITHIC WASTE FORMS FOR DISPOSAL OF RADIOACTIVE WASTE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste | |
| STANDARD TEST METHOD FOR STRUCTURAL PERFORMANCE OF EXTERIOR DIMENSION STONE CLADDING SYSTEMS BY UNIFORM STATIC AIR PRESSURE DIFFERENCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference | |
| Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures | |
| STANDARD TEST METHOD FOR TESTING OF GLASS EXUDATION FROM AZS FUSION-CAST REFRACTORIES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories | |
| STANDARD TEST METHOD FOR THE RADIOCHEMICAL DETERMINATION OF AMERICIUM-241 IN SOIL BY ALPHA SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry | |
| STANDARD TEST METHOD FOR THERMAL INTEGRITY OF FLEXIBLE WATER VAPOR RETARDERS | |
| STANDARD TEST METHOD FOR URANIUM BY IRON (II) REDUCTION IN PHOSPHORIC ACID FOLLOWED BY CHROMIUM (VI) TITRATION IN THE PRESENCE OF VANADIUM - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium | |
| STANDARD TEST METHOD FOR URANIUM IN PRESENCE OF PLUTONIUM BY IRON(II) REDUCTION IN PHOSPHORIC ACID FOLLOWED BY CHROMIUM(VI) TITRATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration | |
| Standard Test Method for Uranium in the Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration | |
| STANDARD TEST METHOD FOR VOLUME SHRINKAGE OF LATEX SEALANTS DURING CURE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Volume Shrinkage of Latex Sealants During Cure | |
| STANDARD TEST METHOD FOR WATER ABSORPTION OF SLATE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Water Absorption of Slate | |
| STANDARD TEST METHOD FOR WATER-SOLUBLE CHLORIDE IN MORTAR AND CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Water-Soluble Chloride in Mortar and Concrete | |
| STANDARD TEST METHOD FOR X-RAY SPECTROMETRIC ANALYSIS OF LIME AND LIMESTONE | |
| Standard Test Methods for Arsenic in Uranium Hexafluoride | |
| STANDARD TEST METHODS FOR COMPRESSIVE CREEP OF CHEMICAL-RESISTANT POLYMER MACHINERY GROUTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts | |
| Standard Test Methods for Determining Chemical Durability of Nuclear Waste Glasses: the Product Consistency Test (PCT) | |
| STANDARD TEST METHODS FOR DETERMINING CHEMICAL DURABILITY OF NUCLEAR, HAZARDOUS, AND MIXED WASTE GLASSES AND MULTIPHASE GLASS CERAMICS: THE PRODUCT CONSISTENCY TEST (PCT) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) | |
| STANDARD TEST METHODS FOR FLEXURE TESTING OF STRUCTURAL AND ROOFING SLATE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Flexure Testing of Structural and Roofing Slate | |
| STANDARD TEST METHODS FOR SAMPLING AND TESTING NON-ASBESTOS FIBER- CEMENT FLAT SHEET, ROOFING AND SIDING SHINGLES, AND CLAPBOARDS | |
| STANDARD TEST METHODS FOR SAMPLING AND TESTING NON-ASBESTOS FIBER-CEMENT FLAT SHEET, ROOFING AND SIDING SHINGLES, AND CLAPBOARDS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHODS FOR SAMPLING AND TESTING NON-ASBESTOS FIBER-CEMENT FLAT SHEET, ROOFING AND SIDING SHINGLES, AND CLAPBOARDS | |
| STANDARD TEST METHODS FOR SHEAR STRENGTH OF CONTINUOUS FIBER-REINFORCED ADVANCED CERAMICS AT AMBIENT TEMPERATURES | |
| STANDARD TEST METHODS FOR UNCOMPACTED VOID CONTENT OF FINE AGGREGATE (AS INFLUENCED BY PARTICLE SHAPE, SURFACE TEXTURE, AND GRADING) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) | |
| Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading | |
| Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity) | |
| Test Requirements for: Metering Devices Equipped with Service Switches | |
| Thermal Demand Meters | |
| TIME-OF-USE REGISTERS FOR ELECTROMECHANICAL WATTHOUR METERS | |
| Utility Industry End Device Data Tables | |
| Watthour Meters |
| << Prev | Next >> |