Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
350
360
370
380
390
400
407
408
409
410
411
412
413
414
415
416
417
418
419
420
430
440
450
460
470
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Requirements for the Performance and Calibration of Reference Sound Sources for the Determination of Sound Power Levels | |
| Acoustics. Measurement at the operator's position of noise emitted by earth-moving machinery. Stationary test conditions | |
| Acoustics. Measurement of exterior noise emitted by earth-moving machinery. Stationary test conditions | |
| Active and intelligent packaging Part 1: General requirements and specifications of active packaging | |
| Adhesives \x97 Wood-to-wood adhesive bonds \x97 Determination of shear strength by compressive loading | |
| Adhesives Wood-to-wood adhesive bonds Determination of shear strength by tensile loading | |
| Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies | |
| Aerospace - Fluid systems and components - Pressure and temperature classifications | |
| Aerospace - Test bolts, hexagonal head, metallic material, coated or uncoated | |
| Agricultural Vehicles - Mechanical Connections Between Towed and Towing Vehicles - Part 1: Dimensions of Hitch-Hooks | |
| Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 4: Dimensions of piton-type coupling | |
| Agricultural vehicles - Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings | |
| Agricultural vehicles Mechanical connections between towed and towing vehicles Part 2: Specifications for clevis coupling 40 | |
| Agricultural vehicles Mechanical connections between towed and towing vehicles Part 3: Tractor drawbar | |
| Air cargo \x97 Certified lower deck containers \x97 Design and testing | |
| Air Quality - Performance Characteristics and Related Concepts for Air Quality Measuring Methods | |
| Aircraft \x97 Ground support electrical supplies \x97 General requirements | |
| Aircraft ground equipment \x97 Basic requirements \x97 Part 1: General design requirements | |
| Aircraft ground equipment \x97 Lower deck loader \x97 Functional requirements | |
| Aircraft ground equipment \x97 Main deck loader \x97 Functional requirements | |
| Aircraft ground equipment Basic requirements Part 2: Safety requirements | |
| Alpine skis - Determination of deformation load and breaking load | |
| Alpine skis - Determination of fatigue indexes - Cyclic loading test | |
| Ambient Air - Determination of Mass Concentration of Nitrogen Dioxide - Modified Griess-Saltzman Method | |
| Analysis of soaps - Determination of total alkali content and total fatty matter content | |
| Animal and vegetable fats and oils - Determination of ash | |
| Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) | |
| Animal and vegetable fats and oils - Determination of polyethylene-type polymers | |
| Animal and vegetable fats and oils Determination of anisidine value | |
| Animal and vegetable fats and oils Determination of oxidative stability (accelerated oxidation test) | |
| Animal feeding stuffs - Determination of water-soluble chlorides content Part 1: Titrimetric method | |
| Animal feeding stuffs - Qualitative determination of zearalenone | |
| Animal feeding stuffs Sampling | |
| Assembly Tools for Screws and Nuts - Adjustable Wrenches | |
| Assistive products - Accessibility guidelines and requirements to survey the needs of persons with sensory disabilities for assistive products and services | |
| Automatic steam traps - Definition of technical terms | |
| Automation systems and integration \x97 Numerical control of machines \x97 Program format and definitions of address words Part 1: Data format for positioning, line motion and contouring control systems | |
| Brown coals and lignites \x97 Determination of the yields of tar, water, gas and coke residue by low temperature distillation | |
| Buildings and civil engineering works \x97 Vocabulary Part 1: General terms | |
| Buildings and civil engineering works \x97 Vocabulary Part 2: Contract terms | |
| Buildings and civil engineering works \x97 Vocabulary Part 3: Sustainability terms | |
| Buildings and civil engineering works \x97 Vocabulary Part 4: Facility management terms | |
| Bunker cargo loading from oil terminal to bunker tanker using Coriolis mass flow meter | |
| Bunkering \x97 Meter verification using master Coriolis mass flow meter | |
| Calculation of Load Capacity of Spur and Helical Gears - Part 3: Calculation of Tooth Bending Strength | |
| Calculation of Load Capacity of Spur and Helical Gears - Part 5: Strength and Quality of Materials | |
| Calculation of Load Capacity of Spur and Helical Gears Part 1: Basic Principles, Introduction and General Influence Factors | |
| Calculation of Load Capacity of Spur and Helical Gears Part 2: Calculation of Surface Durability (Pitting) | |
| Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load | |
| Calculations of greenhouse gas (GHG) emissions throughout the liquefied natural gas (LNG) chain Part 2: Natural gas production and transport to LNG plant | |
| Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium Part 1: Test method | |
| Cereals and pulses - Determination of hidden insect infestation Part 1: General principles | |
| Cereals and pulses - Determination of hidden insect infestation Part 2: Sampling | |
| Cereals and pulses - Determination of hidden insect infestation Part 4: Rapid methods | |
| Chemical analysis of steel \x97 Order of listing elements in steel standards | |
| Chromium ores and concentrates \x97 Determination of chromium content \x97 Titrimetric method | |
| Cinematography - 16 mm Motion-Picture and Magnetic Film - Cutting and Perforating Dimensions | |
| Cinematography - Monophonic 35 mm Negative Photographic Sound Record on 35 mm Motion-Picture Film - Position and Maximum Width Dimensions | |
| Cinnamon (Cinnamomum zeylanicum Blume) \x97 Specification | |
| Climatic Data for Building Design - Proposed System of Symbols | |
| Coal and coke \x97 Determination of carbon and hydrogen \x97 Liebig method | |
| Coated Abrasives - Grain Size Analysis - Part 1: Grain Size Distribution Test | |
| Coated Abrasives - Grain Size Analysis - Part 2: Determination of Grain Size Distribution of Macrogrits P12 to P220 | |
| Code for individual languages and language groups | |
| Codes for the Representation of Names of Languages - Part 1: Alpha-2 Code | |
| Codes for the representation of names of languages - Part 3: Alpha-3 code for comprehensive coverage of languages | |
| Codes for the representation of names of languages \x97 Part 5: Alpha-3 code for language families and groups | |
| Codes for the representation of names of languages Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines | |
| Codes for the representation of names of languages Part 6: Alpha-4 code for comprehensive coverage of language variants | |
| Codes for the Representation of the Names of Languages - Part 2: Alpha-3 Code | |
| Coffee sampling - Triers for green coffee or raw coffee and parchment coffee | |
| Coke - Determination of shatter indices | |
| Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % | |
| Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing - Part 1: Ports with O-Ring in Truncated Housing | |
| Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends - Dimensions, Design,... | |
| Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing - Part 3: Light-Duty (L Series) Stud Ends - Dimensions, Design,... | |
| Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods and requirements for external hex... | |
| Cork - Vocabulary | |
| Corrosion of metals and alloys \x97 Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria | |
| Cranked-link drag chains of welded construction, attachments and sprockets | |
| Cranked-link mill chains of welded construction, attachments and sprockets | |
| Cycles - Lighting and retro-reflective devices Part 2: Retro-reflective devices | |
| Cycles - Lighting and retro-reflective devices Part 3: Installation and use of lighting and retro-reflective devices | |
| Cycles - Pedal axle and crank assembly with square end fitting - Assembly dimensions | |
| Cycles \x97 Handlebar centre and stem dimensions | |
| Cycles \x97 Lighting and retro-reflective devices Part 1: Lighting and light signalling devices | |
| Cycles \x97 Lighting and retro-reflective devices Part 4: Lighting systems powered by the cycle's movement | |
| Cycles \x97 Lighting and retro-reflective devices Part 5: Lighting systems not powered by the cycle's movement | |
| Data Interchange - Structure for the Identification of Organizations | |
| Diesel engines Fuel injection pumps Tapers for shaft ends and hubs | |
| Dried red jujubes \x97 Specification and test methods | |
| Earth-moving machinery - Definitions of dimensions and codes - Part 2: Equipment and attachments | |
| Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions | |
| Earth-moving machinery - Determination of sound power level - Dynamic test conditions | |
| Earth-moving machinery - Dozers - Terminology and commercial specifications | |
| Earth-moving machinery - Operator's manual - Content and format | |
| Earth-moving machinery - Symbols for operator controls and other displays Part 1: Common symbols | |
| Earth-moving machinery - Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories | |
| Earth-moving machinery \x97 Definitions of dimensions and codes \x97 Part 1: Base machine | |
| Earth-moving machinery \x97 Operator's manual \x97 Part 1: Contents and format | |
| Earth-moving machinery \x97 Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories | |
| Earth-moving machinery and machinery for forestry - Operator protective structures - Material performance requirements | |
| Electrically propelled road vehicles - Safety specifications Part 1: On-board rechargeable energy storage system (RESS) | |
| Electrically propelled road vehicles - Safety specifications Part 2: Vehicle operational safety means and protection against failures | |
| Electrically propelled road vehicles - Safety specifications Part 3: Protection of persons against electric shock | |
| Electrically propelled road vehicles - Safety specifications Part 4: Post crash electrical safety | |
| End mills with indexable inserts Part 1: End mills with flatted cylindrical shank | |
| End mills with indexable inserts Part 2: End mills with Morse taper shank | |
| Equipment for harvesting \x97 Combine harvesters and functional components \x97 Vocabulary | |
| Face and shoulder milling cutters with indexable inserts - Dimensions | |
| Ferrovanadium \x97 Determination of vanadium content \x97 Potentiometric method | |
| Fertilizers and soil conditioners - Liquid methylene-urea slow release fertilizers - General requirements | |
| Fertilizers, soil conditioners and beneficial substances - Simultaneous determination of N-(nButyl) thiophosphoric triamide and dicyandiamide by high-performance liquid chromatography | |
| Fire containment - Elements of building construction Part 1: Ventilation ducts | |
| Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation | |
| Fire protection equipment \x97 Carbon dioxide extinguishing systems for use on premises \x97 Design and installation | |
| Flexible cellular polymeric materials - Polyurethane foam for laminate use - Specification | |
| Flexible Cellular Polymeric Materials - Sponge and Expanded Cellular Rubber Products - Specification Part 1: Sheeting | |
| Flexible cellular polymeric materials - Sponge and expanded cellular rubber products Part 2: Specification for mouldings and extrusions | |
| Flowing cereals and milled cereal products Automatic sampling by mechanical means | |
| Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances | |
| Forestry Machinery - Portable Chain-Saw Front Hand-Guard - Dimensions and Clearances | |
| Forestry machinery - Portable chain-saw hand-guards - Mechanical strength | |
| Fruits, vegetables and derived products - Determination of cadmium content - Part 1: Method using graphite furnace atomic absorption spectrometry | |
| Fruits, vegetables and derived products - Determination of cadmium content - Part 2: Method using flame atomic absorption spectrometry | |
| Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 10: Permeation Method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation | |
| Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 5: Capillary Calibration Devices | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method | |
| Gas analysis Preparation of calibration gas mixtures Static volumetric method | |
| Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration | |
| Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 2: Volumetric pumps | |
| Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method | |
| Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 6: Critical orifices | |
| Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 8: Diffusion method | |
| General-purpose flat pallets for through transit of goods. Principal dimensions and tolerances | |
| General-purpose industrial fans Circular flanges Dimensions | |
| Grain Size Analysis - Part 3: Determination of Grain Size Distribution of Microgrits P240 to P2500 | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs | |
| Graphical symbols \x97 Public information symbols | |
| Graphical symbols \x97 Registered public information symbols | |
| Graphical symbols for use on equipment Index and synopsis | |
| Green coffee - Determination of loss in mass at 105 \xb0C | |
| Green coffee - Preparation of samples for use in sensory analysis | |
| Healthcare organization management - Pandemic response - Guidance on social distancing and source control | |
| Heat treatable steels, alloy steels and free-cutting steels Part 5: Nitriding steels | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 6: Hot-rolled steels for quenched and tempered springs | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 7: Bright products of non-alloy and alloy steels | |
| High yield strength steel plates and wide flats for cold forming - Delivery conditions | |
| Horological vocabulary - Part 2: Technical and commercial definitions | |
| Horology \x97 Divers' watches | |
| Hydraulic Fluid Power - Compensated Flow-Control Valves - Mounting Surfaces | |
| Hydraulic Fluid Power - Cylinders - Piston Seal Housings Incorporating Bearing Rings - Dimensions and Tolerances | |
| Hydraulic Fluid Power - Cylinders - Rod End Plain Eyes - Mounting Dimensions | |
| Hydraulic Fluid Power - Cylinders - Rod End Spherical Eyes - Mounting Dimensions | |
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350... | |
| Hydraulic fluid power - Hoses and hose assemblies - Test methods | |
| Hydraulic Fluid Power - Pressure-Relief Valves - Mounting Surfaces | |
| Hydraulic fluid power \x97 Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 | |
| Hydraulic fluid power Flange connectors with split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to... | |
| Hydrometry - Methods for assessment of reservoir sedimentation | |
| Hydrometry \x97 Position fixing equipment for hydrometric boats | |
| Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement | |
| Implants for surgery - Ceramic materials Part 1: Ceramic materials based on high purity alumina | |
| Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions | |
| Information and Documentation - Bibliographic References - Part 2: Electronic Documents or Parts Thereof | |
| Information and Documentation - Glagolitic Alphabet Coded Character Set for Bibliographic Information Interchange | |
| Information and documentation - Guidelines for bibliographic references and citations to information resources | |
| Information processing - Programflow for processing sequential files in terms of record groups | |
| Instant coffee - Sampling method for bulk units with liners | |
| Internal combustion engines - Piston rings - Expander/segment oil-control rings | |
| Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron | |
| Internal combustion engines - Piston rings - Part 1: Vocabulary | |
| Internal combustion engines - Piston rings Part 1: Keystone rings made of cast iron | |
| Internal combustion engines - Piston rings Part 3: Coil-spring-loaded oil control rings made of steel | |
| Internal combustion engines - Piston rings Part 3: Keystone rings made of stee | |
| Internal combustion engines \x97 Piston rings Part 1: Coil spring loaded oil control rings made of cast iron | |
| Internal combustion engines \x97 Piston rings Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron | |
| Internal combustion engines \x97 Piston rings Part 3: Material specifications | |
| Internal combustion engines \x97 Spin-on filters for lubricating oil \x97 Dimensions | |
| Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron | |
| Internal combustion engines Piston rings Part 2: Inspection measuring principles | |
| Internal combustion engines Piston rings Part 2: Rectangular rings made of steel | |
| Internal combustion engines Piston rings Part 4: General specifications | |
| Internal combustion engines Piston rings Part 4: Half keystone rings made of steel | |
| Internal combustion engines Piston rings Part 5: Quality requirements | |
| Internal combustion engines Piston rings Scraper rings made of cast iron | |
| International Gear Notation - Symbols for Geometrical Data | |
| ISO General Purpose Screw Threads - Basic Profile - Part 1: Metric Screw Threads | |
| ISO General Purpose Screw Threads - Basic Profile - Part 2: Inch Screw Threads | |
| ISO general purpose screw threads \x97 Basic profile Part 1: Metric screw threads | |
| ISO general purpose screw threads \x97 Basic profile Part 2: Inch screw threads | |
| Jewellery and precious metals - Inspection of batches of small diamonds - Terminology, classification and test methods | |
| Laurel (Laurus nobilis L.) \x97 Whole and ground leaves \x97 Specification | |
| Lignins - Determination of dry matter content - Oven-drying and freeze-drying methods | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 15: Family E (Internal combustion engine oils) | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 1: Family A (Total loss systems) | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 3: Family D (Compressors) | |
| Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 4: Family H (Hydraulic Systems) | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines) | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases) | |
| Lubricants, industrial oils and related products (class L) - Classification Part 99: General | |
| Lubricants, industrial oils and related products (class L) \x97 Classification Part 6: Family C (gear systems) | |
| Lubricants, industrial oils and related products (Class L) \x97 Family D (compressors) Part 1: Specifications of categories DAA and DAB (lubricants for reciprocating and drip feed rotary air compressors) | |
| Lubricants, industrial oils and related products (Class L) \x97 Family D (compressors) Part 3: Specifications of categories DRA, DRB, DRC, DRD, DRE, DRF and DRG (lubricants for refrigerating compressors) | |
| Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type | |
| Machine tools - Connecting dimensions of spindle noses and work holding chucks Part 1: Conical connection | |
| Machine Tools - Mounting of Plain Grinding Wheels by Means of Hub Flanges | |
| Machine Tools - Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes - Testing of the Accuracy | |
| Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification | |
| Machinery for Forestry - Portable Hand-Held Chain-Saws - Vocabulary | |
| Machinery for forestry \x97 Portable chain-saws \x97 Vocabulary | |
| Measurement of density of water-sediment mixture using radiation transmission method | |
| Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels \x97 Dynamic measurement of liquefied natural gas (LNG) as marine fuel \x97 Truck-to-ship (TTS) bunkering | |
| Mechanical Vibration - Guidelines for the Measurement, Reporting and Evaluation of Vibration with Regard to Habitability on Passenger and Merchant Ships | |
| Metallic materials \x97 Tensile testing Part 4: Method of test in liquid helium | |
| Methanol as a fuel for marine applications - General requirements and specifications | |
| Method to calculate GHG emissions at LNG plant | |
| Micrographics - Aperture Cards - Method of Measuring Thickness of Buildup Area | |
| Micrographics - First Generation Silver- Gelatin Microforms of Source Documents - Density Specifications | |
| Micrographics - Microfilming of Documents on 16 mm and 35 mm Silver-Gelatin Type Microfilm - Operating Procedures | |
| Micrographics - Readers for Transparent Microforms - Performance Characteristics | |
| Micrographics - Vocabulary - Part 02: Image Positions and Methods of Recording | |
| Micrographics - Vocabulary - Part 10: Index | |
| Micrographics - Vocabulary - Part 1: General Terms | |
| Micrographics - Vocabulary - Part 3: Film Processing | |
| Micrographics - Vocabulary - Part 5: Quality of Images, Legibility, Inspection | |
| Micrographics - Vocabulary - Part 7: Computer Micrographics | |
| Micrographics - Vocabulary Part 6: Equipment | |
| Micrographics Vocabulary \x97 Part 4: Materials and packaging | |
| Milk \x97 Enumeration of colony-forming units of psychrotrophic microorganisms \x97 Colony-count technique at 6,5 \xb0C | |
| Milk and milk products - Determination of iron content - Spectrometric method (Reference method) | |
| Milk and milk products Enumeration of colony-forming units of yeasts and/or moulds Colony-count technique at 25 \xb0C ICS | |
| Milk, cream and evaporated milk - Determination of total solids content (Reference method) | |
| Milking Machine Installations - Mechanical Tests | |
| Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements | |
| Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions | |
| Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed | |
| Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements | |
| Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions | |
| Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 1: Guidelines for Tailored Analysis | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two... | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory... | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory... | |
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods | |
| Natural gas Determination of composition with defined uncertainty by gas chromatography Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns... | |
| Natural gas Determination of mercury Part 1: Sampling of mercury by chemisorption on iodine | |
| Natural gas Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy | |
| Nickel and nickel alloys - Terms and definitions | |
| Non-destructive testing \x97 Leak testing \x97 Radioactive tracer methods for pressured vessels and underground pipelines | |
| Nuclear energy - Reference beta-particle radiation - Part 1: Methods of production | |
| Nuclear energy - Reference beta-particle radiation - Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field | |
| Nuclear energy - Reference beta-particle radiation - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle... | |
| Nuclear fuel technology - Preparation of spikes for isotope dilution mass spectrometry (IDMS) | |
| Optics and photonics - Test method for temperature coefficient of refractive index of optical glasses Part 2: Interferometric method | |
| Optics and photonics \x97 Test method for temperature coefficient of refractive index of optical glasses Part 1: Minimum deviation method | |
| Paints and varnishes - Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV) | |
| Paints and varnishes Rapid-deformation (impact resistance) tests Part 2: Falling-weight test, small-area indenter | |
| Paper, board and pulps - Determination of conductivity of aqueous extracts | |
| Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot extraction | |
| Paper, board and pulps Determination of pH of aqueous extracts Part 1: Cold extraction | |
| Petroleum products \x97 Determination of thermal oxidation stability of gas turbine fuels | |
| Petroleum products \x97 Determination of water separability of petroleum oils and synthetic fluids | |
| Petroleum products and other liquids - Standard test method for ethanol determination in gasoline blends by gas chromatography | |
| Photography - Black-and-White Continuous-Tone Papers - Determination of ISO Speed and ISO Range for Printing | |
| Photography - Films and Papers - Determination of Dimensional Change | |
| Photography - Industrial Radiographic Film - Determination of ISO Speed and Average Gradient When Exposed to X- and Gamma- Radiation | |
| Photography - Micrographic Films, Spools and Cores - Dimensions | |
| Photography - Photographic Materials - Detemination of ISO Resolving Power | |
| Photography - Processing Waste - Determination of Ammoniacal Nitrogen (Microdiffusion Method) | |
| Photography - Processing Waste - Determination of Total Amino Nitrogen (Microdiffusion Kjeldahl Method) | |
| Photography - Processing Wastes - Determination of Boron | |
| Photography - Processing Wastes - Determination of Nitrate by a Spectrometric Method Using Brucine | |
| Pipe flanges Part 1: Steel flanges for industrial and general service piping systems | |
| Plain bearings - Aluminium alloys for solid bearings | |
| Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs | |
| Plain bearings - Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions | |
| Plain bearings \x97 Metallic thin-walled half bearings \x97 Determination of the s0,01*-limit | |
| Plain bearings \x97 Pressed bimetallic half thrust washers \x97 Features and tolerances | |
| Plain bearings \x97 Requirements and guidance on backings for thick-walled multilayer bearings | |
| Plastics - Determination of Dynamic Mechanical Properties - Part 10: Complex Shear Viscosity Using a Parallel-Plate Oscillatory Rheometer | |
| Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature | |
| Plastics - Determination of dynamic mechanical properties - Part 9: Tensile vibration - Sonic-pulse propagation method | |
| Plastics - Determination of dynamic mechanical properties Part 12: Compressive vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties Part 4: Tensile vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties Part 5: Flexural vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties Part 6: Shear vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties Part 7: Torsional vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties Part 9: Tensile vibration - Sonic-pulse propagation method | |
| Plastics - Impact Resistant Acrylonitrile/Styren e Moulding and Extrusion Materials (ASA, AES, ACS), Excluding Butadiene-Modified Materials Part 1: Designation | |
| Plastics - Plastics identification using Raman spectrometric methods | |
| Plastics \x97 Determination of dynamic mechanical properties Part 8: Longitudinal and shear vibration \x97 Wave-propagation method | |
| Plastics Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification | |
| Pneumatic Fluid Power - Compressed Air Lubricators - Part 1: Main Characteristics to Be Included in Supplier's Literature and Product-Marking Requirements | |
| Pneumatic Fluid Power - Compressed Air Lubricators - Part 2: Test Methods to Determine the Main Characteristics to be Included in Supplier's Literature | |
| Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 1: Main Characteristics to be Included in Literature from Suppliers and Product-Marking Requirements | |
| Pneumatic Fluid Power - Compressed Air Pressure Regulators and Filter-Regulators - Part 2: Test Methods to Determine the Main Characteristics to be Included in Literature from Suppliers | |
| Pneumatic fluid power - Compressed air pressure regulators and filter-regulators Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators | |
| Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids Part 1: General rules and test methods for steady-state flow | |
| Pneumatic Fluid Power - Single Rod Cylinders - 10 Bar (1 000 kPa) Series - Bores from 8 to 25 mm - Mounting Dimensions | |
| Pneumatic Fluid Power - Single Rod Cylinders, 1000 kPa (10 Bar) Series, with Detachable Mountings, Bores from 32 mm to 320 mm - Mounting Dimensions | |
| Pneumatic fluid power \x97 Cylindrical quickaction couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) \x97 Plug connecting dimensions,... | |
| Pneumatic fluid power \x97 Determination of flow-rate characteristics of components using compressible fluids Part 1: General rules and test methods for steady-state flow | |
| Pneumatic fluid power \x97 Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods | |
| Pneumatic fluid power \x97 Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems | |
| Polyolefin pipes and fittings - Determination of carbon black content by calcination and pyrolysis \x97 Test method | |
| Portable chainsaws - Chain brake performance | |
| Powered industrial trucks and tractors. Brake performance and component strength | |
| Pulps \x97 Determination of alkali resistance | |
| Radio-frequency identification of animals - Code structure ultra high frequency transponders | |
| Railway components - Technical delivery requirements - Part 2: Non-alloy carbon steel baseplates | |
| Reciprocating internal combustion engines - Fire protection | |
| Reciprocating Internal Combustion Engines - Measurement of Emitted Airborne Noise - Engineering Method and Survey Method | |
| Reciprocating internal combustion engines - Measurement of sound power level using sound pressure Part 3: Survey method for use in situ | |
| Reciprocating internal combustion engines \x97 Measurement of sound power level using sound pressure Part 1: Engineering method | |
| Reciprocating internal combustion engines \x97 Measurement of sound power level using sound pressure Part 2: Survey method | |
| Reference Beta Radiations for Calibrating Dosimeters and Dose-Rate Meters and for Determining Their Response as a Function of Beta-Radiation Energy | |
| Refrigerated hydrocarbon liquids \x97 Static measurement \x97 Calculation procedure | |
| Rice - Determination of the Potential Milling Yield from Paddy and Husked Rice | |
| Road vehicles - 60 V and 600 V single-core cables Part 1: Dimensions, test methods and requirements for copper conductor cables | |
| Road vehicles - Brake linings - Compressive strain test methods | |
| Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies | |
| Road Vehicles - Collision Classification - Terminology | |
| Road vehicles - Ignition systems - Part 1: Vocabulary | |
| Road vehicles - Ignition systems Part 2: Electrical performance and function test methods | |
| Road vehicles - Measurement techniques in impact tests - Instrumentation | |
| Road vehicles - Measurement techniques in impact tests Instrumentation | |
| Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales | |
| Road vehicles - Motorcycles and mopeds - Symbols for controls, indicators and tell-tales | |
| Road Vehicles - Procedure for H- and R-Point Determination | |
| Road Vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs | |
| Road vehicles - Sound signalling devices - Tests after mounting on vehicle | |
| Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements | |
| Road vehicles 60V and 600V single core cables Dimensions, test methods and requirements | |
| Road vehicles \x97 60 V and 600 V single-core cables Part 2: Dimensions, test methods and requirements for aluminium conductor cables | |
| Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 .. 1 glow-plugs | |
| Rotary shaft lip type seals. Performance test procedures | |
| Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances | |
| Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary | |
| Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 3: Storage, handling and installation | |
| Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections | |
| Rubber \x97 Guide to the use of curemeters | |
| Rubber \x97 Measurement of vulcanization characteristics using curemeters Part 1: Introduction | |
| Rubber \x97 Measurement of vulcanization characteristics using curemeters Part 2: Oscillating disc curemeter | |
| Rubber \x97 Measurement of vulcanization characteristics using curemeters Part 3: Rotorless curemeter | |
| Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers \x97 Specification | |
| Rubber compounding ingredients - Carbon black - Determination of solvent-extractable material | |
| Rubber compounding ingredients Abbreviations | |
| Rubber Hoses and Hose Assemblies for Underground Mining - Wire-Reinforced Hydraulic Types for Coal Mining - Specification | |
| Rubber or Plastics Hoses and Hose Assemblies - Hydraulic-Pressure Impulse Test without Flexing | |
| Rubber Products - Bridge Bearings - Specification for Rubber Materials | |
| Rubber, raw \x97 Determination of block polystyrene content \x97 Ozonolysis method | |
| Rubber, vulcanized - Determination of tension fatigue | |
| Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension | |
| Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals | |
| Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber-Coated Fabrics - Determination of Transmission Rate of Volatile Liquids (Gravimetric Technique) | |
| Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles | |
| Safety specifications Part 3: Electrical safety | |
| Securities and Related Financial Instruments - International Securities Identification Numbering System (ISIN) | |
| Sensory analysis - Methodology - General guidance | |
| Series 1 Freight Containers - Classification, Dimensions and Ratings | |
| Shipbuilding - Deck machinery - Warping end profiles | |
| Ships and marine technology - Cable stoppers | |
| Ships and Marine Technology - Positioning of Magnetic Compasses in Ships | |
| Side and face milling (slotting) cutters with indexable inserts \x97 Dimensions | |
| Single-Use Containers for Venous Blood Specimen Collection | |
| Skis - Vocabulary | |
| Solid mineral fuels \x97 Determination of phosphorus content \x97 Reduced molybdophosphate photometric method | |
| Solid mineral fuels Coke Determination of moisture in the general analysis test sample | |
| Spherical Plain Bearings - Vocabulary | |
| Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) | |
| Stainless steel bars for the reinforcement of concrete | |
| Standard representation of geographic point location by coordinates | |
| Steel for the prestressing of concrete Part 4: Strand | |
| Steel wire rod for bridge cable wire | |
| Structural steels Part 1: General technical delivery conditions for hot-rolled products | |
| Structural steels Part 2: Technical delivery conditions for structural steels for general purposes | |
| Structural steels Part 3: Technical delivery conditions for fine-grain structural steels | |
| Structural steels Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates and wide flats | |
| Structural steels Part 6: Technical delivery conditions for seismic-proof improved structural steels for building | |
| Sweetened condensed milk \x97 Determination of total solids content (Reference method) | |
| Test conditions for horizontal internal type broaching machines \x97 Testing of accuracy | |
| Test conditions for vertical internal type broaching machines - Testing of accuracy | |
| Test conditions for vertical surface type broaching machines \x97 Testing of accuracy | |
| Textile Floor Coverings - Assessment of Static Electrical Propensity - Walking Test | |
| Textile floor coverings \x97 Consumer information | |
| Textiles - Determination of Mass - Vocabulary | |
| Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 1: Mass Determination and Calculations | |
| Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 2: Methods for Obtaining Laboratory Samples | |
| Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 3: Specimen Cleaning Procedures | |
| Textiles - Yarns from Packages - Method of Test for Breaking Strength of Yarn by the Skein Method | |
| Textiles \x97 Woven fabrics \x97 Determination of dimensional change on commercial laundering near the boiling point | |
| Textiles Fibres - Determination of Length and Length Distribution of Staple Fibres (by Measurement of Single Fibres) | |
| Thermal insulation products - Flexible microporous insulation for industrial applications - Specification | |
| Thermal insulation products for building equipment and industrial installations - Expanded perlite products - Specification | |
| Thermoplastic polymers for plain bearings \x97 Classification and designation | |
| Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement | |
| Tobacco and tobacco products Determination of water content Karl Fischer method | |
| Tool holders with cylindrical shank (boring bars) for indexable inserts - Designation | |
| Tools for Moulding - Ejector Pins with Cylindrical Head | |
| Tools for pressing \x97 Round punches with 60 degrees conical head and straight shank | |
| Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools | |
| Tools for Pressing and Moulding - Machined Plates - Part 2: Machined Plates for Moulds | |
| Tracked Changes (Redline) - Adhesives \x97 Wood-to-wood adhesive bonds \x97 Determination of shear strength by tensile loading | |
| Tracked Changes (Redline) - Agricultural vehicles \x97 Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings | |
| Tracked Changes (Redline) - Analysis of soaps - Determination of total alkali content and total fatty matter content | |
| Tracked Changes (Redline) - Assembly tools for screws and nuts \x97 Adjustable wrenches | |
| Tracked Changes (Redline) - Buildings and civil engineering works \x97 Vocabulary \x97 Part 3: Sustainability terms | |
| Tracked Changes (Redline) - Buildings and civil engineering works \x97 Vocabulary Part 1: General terms | |
| Tracked Changes (Redline) - Buildings and civil engineering works \x97 Vocabulary Part 2: Contract and communication terms | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials | |
| Tracked Changes (Redline) - Coal and coke - Determination of phosphorus - Reduced molybdophosphate photometric method | |
| Tracked Changes (Redline) - Coke \x97 Determination of moisture in the general analysis test sample | |
| Tracked Changes (Redline) - Cork \x97 Vocabulary | |
| Tracked Changes (Redline) - Cycles - Lighting and retro-reflective devices - Part 2: Retro-reflective devices | |
| Tracked Changes (Redline) - Cycles - Lighting and retro-reflective devices - Part 4: Lighting systems powered by the cycle's movement | |
| Tracked Changes (Redline) - Cycles - Lighting and retro-reflective devices - Part 5: Lighting systems not powered by the cycle's movement | |
| Tracked Changes (Redline) - Diesel engines \x97 Fuel injection pumps \x97 Tapers for shaft ends and hubs | |
| Tracked Changes (Redline) - Earth-moving machinery \x97 Symbols for operator controls and other displays Part 1: Common symbols | |
| Tracked Changes (Redline) - Electrically propelled road vehicles \x97 Safety specifications Part 2: Vehicle operational safety | |
| Tracked Changes (Redline) - Electrically propelled road vehicles \x97 Safety specifications Part 3: Electrical safety | |
| Tracked Changes (Redline) - Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation | |
| Tracked Changes (Redline) - Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances | |
| Tracked Changes (Redline) - Forestry machinery - Portable chain-saw hand-guards - Mechanical strength | |
| Tracked Changes (Redline) - Graphical symbols - Registered public information symbols | |
| Tracked Changes (Redline) - Heat treatable steels, alloy steels and freecutting steels Part 5: Nitriding steels | |
| Tracked Changes (Redline) - Hydraulic fluid power \x97 Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for... | |
| Tracked Changes (Redline) - Hydraulic fluid power \x97 Test methods for hoses and hose assemblies | |
| Tracked Changes (Redline) - Implants for surgery - Ceramic materials Part 1: Ceramic materials based on high purity alumina | |
| Tracked Changes (Redline) - Information and documentation - Guidelines for bibliographic references and citations to information resources | |
| Tracked Changes (Redline) - Internal combustion engines - Piston rings - Expander/rail oil-control rings | |
| Tracked Changes (Redline) - Internal combustion engines - Piston rings - Part 1: Coil spring loaded oil control rings made of cast iron | |
| Tracked Changes (Redline) - Internal combustion engines - Piston rings Part 2: Inspection measuring principles | |
| Tracked Changes (Redline) - Internal combustion engines - Piston rings Part 5: Quality requirements | |
| Tracked Changes (Redline) - Internal combustion engines \x97 Piston rings \x97 Part 1: Rectangular rings made of cast iron | |
| Tracked Changes (Redline) - Internal combustion engines \x97 Piston rings \x97 Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron | |
| Tracked Changes (Redline) - Internal combustion engines \x97 Piston rings Part 1: Vocabulary | |
| Tracked Changes (Redline) - Internal combustion engines \x97 Piston rings Part 4: General specifications | |
| Tracked Changes (Redline) - ISO general purpose screw threads - Basic and design profiles - Part 1: Metric screw threads | |
| Tracked Changes (Redline) - ISO general purpose screw threads - Basic and design profiles - Part 2: Inch screw threads | |
| Tracked Changes (Redline) - Motorcycles \x97 Measurement method for gaseous exhaust emissions and fuel consumption Part 1: General test requirements | |
| Tracked Changes (Redline) - Nuclear energy - Reference beta-particle radiation - Part 1: Methods of production | |
| Tracked Changes (Redline) - Nuclear energy - Reference beta-particle radiation - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta... | |
| Tracked Changes (Redline) - Nuclear energy \x97 Reference beta-particle radiation \x97 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field | |
| Tracked Changes (Redline) - Optics and photonics \x97 Test method for temperature coefficient of refractive index of optical glasses \x97 Part 1: Minimum deviation method | |
| Tracked Changes (Redline) - Paper, board and pulps - Determination of conductivity of aqueous extracts | |
| Tracked Changes (Redline) - Paper, board and pulps - Determination of pH of aqueous extracts Part 1: Cold extraction | |
| Tracked Changes (Redline) - Paper, board and pulps - Determination of pH of aqueous extracts Part 2: Hot extraction | |
| Tracked Changes (Redline) - Plain bearings \x97 Aluminium alloys for solid bearings | |
| Tracked Changes (Redline) - Plastics - Determination of dynamic mechanical properties Part 9: Tensile vibration - Sonic-pulse propagation method | |
| Tracked Changes (Redline) - Plastics \x97 Determination of dynamic mechanical properties Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer | |
| Tracked Changes (Redline) - Plastics \x97 Determination of dynamic mechanical properties Part 4: Tensile vibration \x97 Non-resonance method | |
| Tracked Changes (Redline) - Pneumatic fluid power \x97 Compressed air pressure regulators and filter-regulators Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements | |
| Tracked Changes (Redline) - Pneumatic fluid power \x97 Compressed air pressure regulators and filter-regulators Part 2: Test methods to determine the main characteristics to be included in literature from suppliers... | |
| Tracked Changes (Redline) - Pneumatic fluid power \x97 Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature | |
| Tracked Changes (Redline) - Powered industrial trucks and tractors - Brake performance and component strength | |
| Tracked Changes (Redline) - Reciprocating internal combustion engines - Fire protection | |
| Tracked Changes (Redline) - Road vehicles - Ignition systems - Part 1: Vocabulary | |
| Tracked Changes (Redline) - Rubber - Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter | |
| Tracked Changes (Redline) - Rubber \x97 Measurement of vulcanization characteristics using curemeters Part 1: Introduction | |
| Tracked Changes (Redline) - Rubber \x97 Measurement of vulcanization characteristics using curemeters Part 2: Oscillating disc curemeter | |
| Tracked Changes (Redline) - Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers \x97 Specification | |
| Tracked Changes (Redline) - Rubber compounding ingredients \x97 Abbreviated terms | |
| Tracked Changes (Redline) - Rubber, vulcanized \x97 Determination of tension fatigue | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic \x97 Determination of tendency to adhere to and corrode metals | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of autombiles | |
| Tracked Changes (Redline) - Sensory analysis \x97 Methodology \x97 General guidance | |
| Tracked Changes (Redline) - Test conditions for vertical internal type broaching machines - Testing of accuracy | |
| Tracked Changes (Redline) - Tobacco and tobacco products \x97 Determination of water content \x97 Karl Fischer method | |
| Tracked Changes (Redline) - Tobacco and tobacco products \x97 Draw resistance of cigarettes and pressure drop of filter rods \x97 Standard conditions and measurement | |
| Tracked Changes (Redline) - Vitreous and porcelain enamels - Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion | |
| Tracked Changes (Redline) - Wrought aluminium and aluminium alloys \x97 Extruded rods/bars, tubes and profiles \x97 Part 6: Tolerances on form and dimensions for round, square, rectangular and hexagonal tubes... | |
| Tracked Changes (Redline) \x96 Implants for surgery \x97 Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion Part 1: Abrasion testing apparatus | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion | |
| Windows and doors - Resistance to wind load - Test method | |
| Windows and doors \x97 Air permeability \x97 Test method | |
| Workplace air - Determination of arsenic and arsenic compounds by electrothermal atomic absorption spectrometry Part 1: Arsenic and arsenic compounds, except arsine by ET-AAS | |
| Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 7: Chemical composition | |
| Wrought aluminium and aluminium alloys \x97 Extruded rods/bars, tubes and profiles Part 2: Mechanical properties | |
| Wrought aluminium and aluminium alloys \x97 Extruded rods/bars, tubes and profiles Part 6: Round, square, rectangular and hexagonal tubes \x97 Tolerances on shape and dimensions | |
| Wrought aluminium and aluminium alloys \x97 Sheets, strips and plates Part 2: Mechanical properties | |
| Wrought aluminium and aluminium alloys \x97 Sheets, strips and plates Part 3: Strips: Tolerances on shape and dimensions | |
| Wrought aluminium and aluminium alloys \x97 Sheets, strips and plates Part 4: Sheets and plates: Tolerances on shape and dimensions |
| << Prev | Next >> |