Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
350
360
370
380
390
400
406
407
408
409
410
411
412
413
414
415
416
417
418
420
430
440
450
460
470
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Abrasive products Checking the grit size of superabrasives | |
| Accessibility and usability of the built environment - Accessibility of immovable cultural heritage - Principles and methodology for interventions | |
| Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method | |
| Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method | |
| Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement Method | |
| Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values | |
| Accuracy (Trueness and Precision) of Measurement Methods and Results Part 1. General Principles and Definitions | |
| Accuracy (Trueness and Precision) of Measurement Methods and Results Part 3. Intermediate Measures of the Precision of a Standard Measurement Method | |
| Acoustics - Methods for calculating loudness Part 1: Zwicker method | |
| Acoustics - Methods for calculating loudness Part 3: Moore-Glasberg-Schli ttenlacher method | |
| Acoustics \x97 Methods for calculating loudness Part 2: Moore-Glasberg method | |
| Adhesives \x97 Floor covering adhesives and products for flooring installation \x97 Assessment and classification of low volatile organic compound (VOC) products | |
| Aerospace - Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes... | |
| Aerospace \x97 Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa \x97 Procurement specification | |
| Aerospace series \x97 Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components | |
| Agricultural machinery \x97 Endless hexagonal belts and groove sections of corresponding pulleys | |
| Agricultural tractors - Requirements, test procedures and acceptance criteria for the operator's field of vision Part 2: Field of vision to the side and to the rear | |
| Agricultural tractors \x97Requirements, test procedures and acceptance criteria for the operator's field of vision Part 1: Field of vision to the front | |
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers | |
| Agricultural vehicles - Mechanical connections on towed vehicles Part 3: Swivel hitch rings | |
| Agricultural vehicles \x97 Mechanical connections on towed vehicles Part 2: Coupling ring 40 with socket | |
| Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings | |
| Alpine ski-boots - Requirements and test methods | |
| Alpine skis - Determination of elastic properties | |
| Alpine skis - Ski binding screws - Test methods | |
| Alpine skis \x97 Determination of mass and polar moment of inertia \x97 Laboratory measurement method | |
| Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid | |
| Animal feeding stuffs - Determination of crude ash \x97 | |
| Asset management - Guidance for the development of public policy to enable asset management | |
| Asset management - Guidance on the management of data assets | |
| Asset management - Management systems \x96 Guidelines for the application of ISO 55001 | |
| Asset management - Management systems \x96 Requirements | |
| Asset management - Overview, principles and terminology | |
| Asset management \x97 Guidance on people involvement and competence | |
| Asset management Overview, principles and terminology | |
| Audit data collection - Customs and indirect tax extension | |
| Audit data collection extension \x97 Government regulated financial reports and payroll | |
| Bamboo-based activated carbon - General specifications | |
| Belt drives - Grooved pulleys for joined classical V-belts - Groove sections AJ, BJ, CJ and DJ (effective system) | |
| Belt Drives - Grooved Pulleys for Narrow V-Belts - Groove Sections 9N/J, 15N/J and 25N/J (Effective System) | |
| Bicycle tyres and rims Part 1: Tyre designations and dimensions | |
| Bicycle tyres and rims Part 2: Rims | |
| Blanks for superabrasive cutting-off wheels Part 1: Manually guided cutting-off in building and civil engineering | |
| Blanks for superabrasive cutting-off wheels Part 2: Hand-held cutting-off in building and civil engineering | |
| Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishing | |
| Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks | |
| Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder | |
| Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder | |
| Bonded Abrasive Products - Dimensions - Part 14: Grinding Wheels for Deburring and Fettling/Snagging on a Angle Grinder | |
| Bonded Abrasive Products - Dimensions - Part 15: Grinding Wheels for Cutting-Off On Stationary or Mobile Cutting-Off Mchines | |
| Bonded Abrasive Products - Dimensions - Part 16: Grinding Wheels for Cutting-Off On Hand-Held Power Tools | |
| Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding between Centres | |
| Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centreless External Cylindrical Grinding | |
| Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding | |
| Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding | |
| Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding | |
| Bonded Abrasive Products - Dimensions - Part 6: Grinding Wheels for Tool and Toolroom Grinding | |
| Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding | |
| Bonded Abrasive Products - Dimensions - Part 8: Grinding Wheels for Deburring and Fettling/Snagging | |
| Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High Pressure Grinding | |
| Bonded abrasive products - Dimensions Part 18: Grinding wheels for flat glass edge grinding machines | |
| Bonded abrasive products \x97 Dimensions Part 17: Spindle mounted wheels (ISO type 52) | |
| BS ISO 55000 Series Asset management Overview, Principles and Terminology | |
| BS ISO 55000 series Asset management | |
| Building construction machinery and equipment \x97 Self-loading mobile concrete mixers \x97 Safety requirements and verification | |
| Camping tents | |
| Carbonaceous materials for the production of aluminium \x97 Pitch for electrodes Part 1: Determination of softening point by the ring-and-ball method | |
| Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Part 2: Determination of the softening point (Mettler softening point method) | |
| Cardiovascular implants and extracorporeal systems \x97 Cardiac valve repair devices | |
| Cartridges, type A, for indexable inserts Part 10: Style U | |
| Cartridges, type A, for indexable inserts Part 11: Style W | |
| Cartridges, type A, for indexable inserts Part 12: Style Y | |
| Cartridges, type A, for indexable inserts Part 1: General survey, correlation and determination of dimensions | |
| Cartridges, type A, for indexable inserts Part 2: Style F | |
| Cartridges, type A, for indexable inserts Part 3: Style G | |
| Cartridges, type A, for indexable inserts Part 4: Style J | |
| Cartridges, type A, for indexable inserts Part 5: Style K | |
| Cartridges, type A, for indexable inserts Part 6: Style L | |
| Cartridges, type A, for indexable inserts Part 7: Style R | |
| Cartridges, type A, for indexable inserts Part 8: Style S | |
| Cartridges, type A, for indexable inserts Part 9: Style T | |
| Caseins - Determination of \x93fixed ash\x94 (Reference method) | |
| Caseins - Determination of free acidity (Reference method) | |
| Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter | |
| Caseins and caseinates - Determination of fat content - Gravimetric method (Reference method) | |
| Caseins and caseinates - Determination of pH (Reference method) | |
| Caseins and caseinates Determination of lactose content Photometric method | |
| Caseins and caseinates Determination of moisture content (Reference method) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method | |
| Cinematography - Colour Motion-Picture Prints and Slides for Television - Density Specifications | |
| Cinematography - Image Produced by Camera Aperture Type W on 16 mm Motion-Picture Film - Position and Dimensions | |
| Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials | |
| Cinematography - Photographic Sound Test Films, 35 mm and 16 mm - Specifications | |
| Cinematography - Splices for Use on 70 mm, 65 mm, 35 mm and 16 mm Motion-Picture Films - Dimensions and Locations | |
| Circular economy - Guidance on the transition of business models and value networks | |
| Circular economy - Measuring and assessing circularity performance | |
| Circular economy \x97 Product circularity data sheet | |
| Circular economy \x97 Vocabulary, principles and guidance for implementation | |
| Civil small and light unmanned aircraft (UA) - Sharp injury to human body by rotor blades - Evaluation and test method | |
| Civil small and light unmanned aircraft systems (UAS) \x97 Vibration test methods | |
| Civil small and light unmanned aircraft systems (UAS) under low-pressure conditions - Test methods | |
| Clean cookstoves and clean cooking solutions - Test protocols for institutional cookstoves | |
| Coal \x97 Determination of mineral matter | |
| Coal and coke - Determination of carbon and hydrogen - High temperature combustion method | |
| Coal and coke \x97 Determination of chlorine using Eschka mixture | |
| Coated abrasives Flap wheels with incorporated flanges or separate flanges | |
| Coke (greater than 20 mm in size) - Determination of mechanical strength | |
| Coke - Determination of bulk density in a small container | |
| Coke - Determination of total moisture | |
| Cold-reduced carbon steel sheet according to hardness requirements | |
| Construction project governance - Guidance on delivery management | |
| Consumer incident investigation \x97 Requirements and guidance | |
| Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities | |
| Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance | |
| Conveyor belts Determination of minimum transition distance on three idler rollers | |
| Corrosion of metals and alloys - Guidelines and requirements for corrosion testing in simulated environment of deep-sea water | |
| Cylindrical Gears for General and Heavy Engineering - Standard Basic Rack Tooth Profile | |
| Cylindrical Gears for General Engineering and for Heavy Engineering - Modules | |
| Direct Reduced Iron - Determination of Metallic Iron Content - Bromide-Methanol Titrimetric Method | |
| Dried milk - Determination of titratable acidity (Reference method) | |
| Dried milk, dried ice-mixes and processed cheese \x97 Determination of lactose content \x97 Part 2: Enzymatic method utilizing the galactose moiety of the lactose | |
| Dried milk, dried ice-mixes and processed cheese Determination of lactose content Part 1: Enzymatic method utilizing the glucose moiety of the lactose | |
| Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces | |
| Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components | |
| Earth-moving machinery - Visual display of machine operation | |
| Electrodynamic vibration generating systems - Performance characteristics | |
| Environmental management and circular economy - Sustainability and traceability of the recovery of secondary materials - Principles, requirements and guidance | |
| Equipment for crop protection - Spraying equipment Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers | |
| Equipment for crop protection - Vocabulary | |
| Equipment for crop protection \x97 Spraying equipment Part 1: Test methods for sprayer nozzles | |
| Equipment for crop protection \x97 Spraying equipment Part 3: Test method to assess the performance of volume/area adjustment systems | |
| Equipment for crop protection \x97 Spraying equipment Part 4: Test methods for agitation of sprayer tanks | |
| Equipment for harvesting - Combine harvester component parts - Equivalent terms | |
| Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance | |
| Equipment for harvesting - Dimensional compatibility of forage harvesting machinery | |
| Essential Oils - Determination of Optical Rotation | |
| Essential Oils - Determination of Residue Content from Distillation Under Reduced Pressure | |
| Ferromanganese \x97 Specification and conditions of delivery | |
| Ferrovanadium - Specification and conditions of delivery | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for GaN crystal surface defects Part 1: Classification of defects | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for GaN crystal surface defects Part 2: Method for determining etch pit density | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Method for measuring the power generation characteristics of piezoelectric resonant device for stand-alone power source | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for determination of monoclinic phase in zirconia | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for determining tensile and shear creep of ceramic adhesive | |
| Firebrand Generator | |
| Fluid power systems and components - Vocabulary | |
| Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types | |
| Fruits, vegetables and derived products - Determination of benzoic acid content - Spectrophotometric method | |
| Functional extenders for special application - Nanoscale diamonds for polymer composites | |
| Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures | |
| Gas analysis - Preparation of calibration gas mixtures - Gravimetric method | |
| Gas analysis - Preparation of calibration gas mixtures Part 2: Gravimetric method for Class II mixtures | |
| Gas analysis \x97 Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures | |
| Graphic technology \x97 Symbols for text proof correction | |
| Guidelines for the promotion and implementation of gender equality and women\x92s empowerment | |
| Hard coal \x97 Determination of total moisture | |
| Hard coal and coke - Determination of ash fusibility | |
| Hard coal and coke - Determination of volatile matter | |
| Harvesting equipment - Blades for agricultural rotary mowers - Requirements | |
| Harvesting equipment - Requirements for cutting elements Part 1: Blades used on rotary disc mowers and rotary drum mowers | |
| Harvesting equipment - Requirements for cutting elements Part 2: Blades used on large rotary mowers | |
| Health informatics - Interoperability of public health emergency preparedness and response information systems | |
| Healthcare organization management - Pandemic response (respiratory) - Walk-through screening station | |
| Healthcare organization management - Pandemic response - Functional requirements for self-symptom checker app | |
| Healthcare organization management \x97 Pandemic response \x97 Temporary medical facility | |
| High-Lift Rider Trucks - Overhead Guards - Specification and Testing | |
| Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities | |
| Hydraulic Fluid Power - Compatibility between Fluids and Standard Elastomeric Materials | |
| Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications | |
| Hydraulic fluid power - Determination of discharge flow rate and thermal losses of gas loaded accumulators Part 1: Test method | |
| Hydraulic Fluid Power - Gas-Loaded Accumulators with Separator - Ranges of Pressures and Volumes and Characteristic Quantities | |
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series | |
| Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series - Part 3: Compact Series with Bores from 250 mm to 500 mm | |
| Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders, 16 MPa (160 Bar) Series Part 2: Compact Series | |
| Hydraulic Fluid Power - Pressure Reducing Valves, Sequence Valves, Unloading Valves, Throttle Valves and Check Valves - Mounting Surfaces | |
| Hydraulic Fluid Power - Single Rod Cylinders - Mounting Dimensions - 250 Bar (25 000 kPa) Series | |
| Implants for Surgery - Acrylic Resin Cements | |
| Implants for Surgery - Cardiac Pacemakers - Part 2: Reporting of Clinical Performance of Populations of Pulse Generators or Leads | |
| Implants for Surgery - Metallic Materials - Part 2: Unalloyed Titanium | |
| Implants for surgery - Metallic materials Part 12: Wrought cobalt-chromium-moly bdenum alloy | |
| Implants for surgery - Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy | |
| Implants for surgery - Metallic materials Part 1: Wrought stainless steel | |
| Implants for surgery - Metallic materials Part 5: Wrought cobalt-chromiumtungs ten- nickel alloy | |
| Implants for surgery - Metallic materials Part 9: Wrought high nitrogen stainless steel | |
| Implants for surgery - Metallic skeletal pins and wires Part 1: General requirements | |
| Implants for Surgery - Ultra-High Molecular Weight Polyethylene - Part 1: Powder Form | |
| Implants for Surgery - Ultra-High Molecular Weight Polyethylene - Part 2: Moulded Forms | |
| Implants for surgery - Ultra-high molecular weight polyethylene - Part 4: Oxidation index measurement method | |
| Implants for surgery - Ultra-high-molecular weight polyethylene Part 3: Accelerated ageing methods | |
| Implants for surgery \x97 Metallic materials Part 11: Wrought titanium 6-aluminium 7- niobium alloy | |
| Implants for surgery \x97 Metallic materials Part 4: Cobalt-chromium-moly bdenum casting alloy | |
| Implants for surgery \x97 Metallic materials Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy | |
| Implants for surgery Ultra-high molecular-weight polyethylene Part 5: Morphology assessment method | |
| Industrial fans - Performance testing using standardized airways | |
| Industrial valves \x97 Bolted bonnet steel gate valves | |
| Information and Documentation - Extension of the Latin Alphabet Coded Character Set for Bibliographic Information Interchange Part 2: Latin Characters Used in Minor European Languages and Obsolete Typography | |
| Information Processing - 9-Track, 12.7mm (0.5in) Wide Magnetic Tape for Information Interchange - Format and Recording, Using Group Coding at 246 cpmm (6 250 cpi) | |
| Innovation management - Fundamentals and vocabulary | |
| Innovation management - Tools and methods for strategic intelligence management - Guidance | |
| Innovation management \x97 Innovation management system \x97 Guidance | |
| Innovation management \x97 Tools and methods for innovation partnership \x97 Guidance | |
| Innovation management \x97 Tools and methods for intellectual property management \x97 Guidance | |
| Instant tea in solid form - Specification | |
| Intelligent transport systems \x97 Identifiers | |
| Iron ores - Determination of copper - Part 2: Flame atomic absorption spectrometric method | |
| Iron Ores - Determination of Copper Content - Part 1: 2,2'- Biquinolyl Spectrophotometric Method | |
| Jewellery and precious metals - Determination of very high purity gold - Difference method using ICP-MS | |
| Laminated products made of bamboo strips for indoor furniture purposes - Requirements and test methods | |
| Leather - Bovine Wet Blue - Specification | |
| Leather - Wet Blue Goat Skins - Specification | |
| Leather - Wet blue sheep skins - Specification | |
| Meat and meat products \x97 Detection of condensed phosphates | |
| Mechanical Vibration and Shock - Human Exposure - Vocabulary | |
| Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers | |
| Metal valves for use in flanged pipe systems - Face-to-face and centre-to-face dimensions | |
| Microbeam analysis \x97 Hyper-dimensional data file specification (HMSA) | |
| Milk and milk products - Determination of copper content - Photometric method (Reference method) | |
| Milk and milk products Sampling Inspection by attributes | |
| Milk fat products - Determination of water content - Karl Fischer method | |
| Milking Machine Installations - Construction and Performance | |
| Molecular biomarkers - Detection of DNA in cotton used for textile production Part 1: Extraction of DNA from cotton, cottonseed and raw materials derived therefrom | |
| Motorcycle tyres and rims (metric series) Part 1: Design guides | |
| Motorcycle tyres and rims (metric series) Part 2: Tyre dimensions and load-carrying capacities | |
| Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours | |
| Noise measurements for UAS (unmanned aircraft systems) | |
| Oil and gas industries including lower carbon energy \x97 Pipeline transportation systems \x97 Vocabulary | |
| Oilseeds, vegetable oils and fats - Nomenclature | |
| Ophthalmic optics and instruments - Anomaloscopes for the diagnosis of red-green colour vision deficiencies | |
| Pallet stackers and high-lift platform trucks - Stability tests | |
| Paper - Determination of folding endurance | |
| Paper and board - Accelerated ageing Part 5: Exposure to elevated temperature at 100 Degrees C | |
| Paper and board - Accelerated ageing Part 6: Exposure to atmospheric pollution (nitrogen dioxide) | |
| Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods | |
| Paper and board - Determination of colour (C/2 Degrees) - Diffuse reflectance method | |
| Paper and board - Determination of colour by diffuse reflectance Part 1: Indoor daylight conditions (C/2 degrees) | |
| Paper and board - Determination of colour by diffuse reflectance Part 2: Outdoor daylight conditions (D65/10 Degrees) | |
| Paper and board - Determination of colour by difuse reflectance Part 3: Indoor illumination conditions (D50/2 Degrees) | |
| Paper and Board - Determination of Grammage | |
| Paper and board - Determination of water absorption after immersion in water | |
| Paper and board \x97 Accelerated ageing Part 7: Exposure to light | |
| Paper and board \x97 Determination of air permeance (medium range) Part 3: Bendtsen method | |
| Paper and board \x97 Determination of air permeance (medium range) Part 6: Oken method | |
| Paper and board \x97 Determination of bending stiffness \x97 Resonance method | |
| Paper and board \x97 Determination of titanium dioxide content | |
| Paper and board Determination of air permeance (medium range) Part 4: Sheffield method | |
| Paper and board Determination of air permeance and air resistance (medium range) Part 5: Gurley method | |
| Petroleum Products - Prediction of the Bulk Moduli of Petroleum Fluids Used in Hydraulic Fluid Power Systems | |
| Photography - Black-and -White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed | |
| Photography - Colour Negative Films for Still Photography - Determination of ISO Speed | |
| Photography - Density Measurements - Part 3: Spectral Conditions | |
| Photography - Direct-Exposing Medical and Dental Radiographic Film/Process Systems - Determination of ISO Speed and ISO Average Gradient | |
| Photography - Film Dimensions - Industrial Radiography | |
| Photography - Photographic Films - Specifications for Safety Film | |
| Photography - Photographic Films and Papers - Wedge Test for Brittleness | |
| Photography - Pre-Packaged Chemicals for the Processing of Silver Halide Based Photographic Materials - Vocabulary | |
| Photography - Processed Photographic Paper Prints - Storage Practices | |
| Photography - Processed Safety Photographic Films - Storage Practices | |
| Photography - Processing Chemicals - Specifications for Potassium Sulfite, 650 g/l Aqueous Solution | |
| Photography. Density measurements. Part 4: Geometric conditions for reflection density | |
| Plastics - Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment - Test methods and requirements | |
| Plastics - Smoke Generation - Part 2. Determination of Specific Optical Density | |
| Plastics - Smoke Generation Part 1: Guidance on Optical- Density Testing | |
| Plastics \x97 Joining of thermoplastic moulded components \x97 Specification for quality levels for imperfections | |
| Pliers and nippers - Diagonal cutting nippers - Dimensions and test values | |
| Pliers and nippers - End cutting nippers - Dimensions and test values | |
| Pliers and nippers - Engineer\x92s and \x93Linesman\x92s\x9 4 pliers -Dimensions and test values | |
| Pliers and nippers - General technical requirements | |
| Pliers and nippers - Methods of test | |
| Pliers and nippers - Nomenclature | |
| Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values | |
| Pneumatic Fluid Power - Compressed Air Filters - Part 1: Main Characteristics to be Included in Supplier's Literature and Product-Marking Requirements | |
| Pneumatic Fluid Power - Compressed Air Filters - Part 2: Test Methods to Determine the Main Characteristics to Be Included in Supplier's Literature | |
| Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 1: Mounting Interface Surfaces without Electrical Connector | |
| Pneumatic Fluid Power - Five-Port Directional Control Valves - Part 2: Mounting Interface Surfaces with Optional Electrical Connector | |
| Pneumatic tools and machines - Vocabulary | |
| Polygonal turret interface with flat contact surface Part 1: Shanks of type F, H and A | |
| Polygonal turret interface with flat contact surface Part 2: Receivers of type F, H, A and X for shanks of type F, H and A | |
| Polygonal turret interface with flat contact surface Part 3: Coupling for driven tool holders with shanks of type F and A | |
| Porcelain Tableware - Specification and test method | |
| Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques | |
| Pulps - Determination of limiting viscosity number in cupri-ethylenediamin e (CED) solution | |
| Pulps - Estimation of Dirt and Shives Part 3: Inspection by Reflected Light | |
| Pulps Estimation of dirt and shives Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method | |
| Quality management systems \x97 Guidance for the application of ISO 9001:2015 in police organizations | |
| Rare earth - Determination of loss on ignition in rare earth products - Gravimetric method | |
| Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration | |
| Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration | |
| Reaction to Fire Tests - Spread of Flame - Part 4: Intermediate-Scale Test of Vertical Spread of Flame with Vertically Oriented Specimen | |
| Reaction-to-fire tests - Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) | |
| Reaction-to-fire tests \x97 Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) | |
| Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw | |
| Rennet caseins and caseinates - Determination of ash (Reference method) | |
| Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary | |
| Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 Degrees C max.) | |
| Road vehicles - Testing the abrasion resistance of automotive glazing with the windscreen wiper test | |
| Road vehicles \x97 Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 \xb0C max.) | |
| Robotics \x97 Test methods for exoskeleton-type walking RACA robot | |
| Rolling Bearings - Chamfer Dimensions - Maximum Values | |
| Rolling bearings - Internal clearance Part 1: Radial internal clearance for radial bearings | |
| Rolling bearings - Internal clearance Part 2: Axial internal clearance for four-point-contact ball bearings | |
| Rolling Bearings - Vocabulary | |
| Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions | |
| Rotary tools for threaded fasteners \x97 Performance test method | |
| Rubber - Determination of adhesion to rigid materials using conical shaped parts | |
| Rubber - Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content | |
| Rubber - Determination of metal content by atomic absorption spectrometry Part 6: Determination of magnesium content | |
| Rubber \x97 Determination of metal content by atomic absorption spectrometry Part 1: Determination of zinc content | |
| Rubber \x97 Determination of metal content by atomic absorption spectrometry Part 2: Determination of lead content | |
| Rubber \x97 Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content | |
| Rubber \x97 Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content | |
| Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems \x97 Specification | |
| Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength | |
| Rubber and Plastics Test Equipment - Tensile, Flexural and Compression Types (Constant Rate of Traverse) - Specification | |
| Rubber building gaskets \x97 Materials for preformed solid vulcanized structural gaskets \x97 Specification | |
| Rubber compounding ingredients - Carbon black - Determination of tinting strength | |
| Rubber Compounding Ingredients - Natural Calcium Carbonate - Test Methods | |
| Rubber compounding ingredients - Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) | |
| Rubber compounding ingredients \x97 Silica, precipitated, hydrated Part 2: Evaluation procedures in styrenebutadiene rubber | |
| Rubber compounding ingredients Silica, precipitated, hydrated Part 1: Non-rubber tests | |
| Rubber or plastics covered rollers \x97 Specifications Part 1: Requirements for hardness | |
| Rubber or plastics covered rollers \x97 Specifications Part 2: Surface characteristics | |
| Rubber, vulcanized - Determination of adhesion to wire cord | |
| Rubber- or Plastics-Coated Fabrics - Determination of Crush Resistance | |
| Screw threads - Vocabulary | |
| Sensory analysis \x97 Methodology \x97 Initiation and training of assessors in the detection and recognition of odours | |
| Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours | |
| Sensory analysis Methodology Paired comparison test | |
| Shipbuilding - Guardrails for cargo ships | |
| Ships and marine technology - Deep-sea hydraulic winch equipment | |
| Ships and marine technology - Drain facilities from oil and water tanks | |
| Ships and marine technology - Embarkation ladders | |
| Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B | |
| Ships and Marine Technology - Manholes with Bolted Covers | |
| Ships and marine technology - Sea-going vessels - Dual traction/stowage winches for oceanographic research | |
| Ships and marine technology - Sea-going vessels - Single-drum winches for oceanographic research | |
| Ships and marine technology - Submersibles - Vocabulary | |
| Ships and marine technology - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing | |
| Ships and Marine Technology - Virtual reality and simulator training equipment and systems for lifesaving appliances and arrangements | |
| Ships and marine technology - Windows and side scuttles for fire-resistant constructions | |
| Ships and marine technology \x97 Accommodation ladders | |
| Ships and marine technology \x97 Deck covering | |
| Short machine taps and hand taps | |
| Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets | |
| Size designation of clothes \x97 Tights | |
| Small craft - Automatic watertight ventilation shutdown system | |
| Soya bean products - Determination of urease activity | |
| Space systems - Ground test for the separation between a launch vehicle and a spacecraft - Requirements for combined separation tests, horizontal separation tests and individual falling separation tests | |
| Space systems \x97 Failure reporting, analysis and corrective action (FRACA) process requirements | |
| Specifications for use of poly(lactic acid) based filament in additive manufacturing applications | |
| Spices and condiments - Dried chive (Allium schoenoprasum L.), cut and ground - Specification | |
| Stationary source emissions - Chemical absorption method for sampling and determining mercury species in flue gas | |
| Steel \x97 Rating and classifying nonmetallic inclusions using the scanning electron microscope | |
| Superabrasive products Rotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual nomenclature | |
| Surface chemical analysis \x97 X-ray photoelectron spectroscopy \x97 Method of intensity calibration for quartz-crystal monochromated Al Ka XPS instruments | |
| Synchronous belt drives - Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH - Metric and inch dimensions | |
| Synchronous belt drives - Pulleys | |
| Synchronous belts \x97 Calculation of power rating and drive centre distance | |
| Tea polyphenol extracts - Definition and basic requirements | |
| Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances | |
| Technical Drawings - Projection Methods - Part 4: Central Projection | |
| Technical requirements and test methods for digital cinema stereoscopic projection | |
| Testing and characterization of mechanically recycled Polypropylene (PP) and Polyethylene (PE) for intended use in different plastics processing techniques | |
| Textiles - Synthetic filament yarns - Test methods for crimp properties of textured yarns | |
| Textiles \x97 Determination of components in flax fibres | |
| Textiles \x97 Quantification of carbon fibre constituent element \x97 Elemental analyser method | |
| Tobacco heating systems - Definitions and standard conditions for aerosol generation and collection Part 2: Aerosol heated tobacco products (aHTPs) | |
| Tobacco heating systems \x97 Definitions and standard conditions for aerosol generation and collection Part 1: Electrically heated tobacco products (eHTPs) | |
| Tobacco heating systems \x97 Definitions and standard conditions for aerosol generation and collection Part 3: Carbon heated tobacco products (cHTPs) | |
| Tobacco heating systems \x97 Vocabulary | |
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the Driving System of Tool Shanks | |
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 1: Designation, styles, dimensions and calculation for corrections | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 2: Style F | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 3: Style K | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 4: Style L | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 5: Style U | |
| Tool holders for internal turning with cylindrical shank for indexable inserts Part 6: Style Q | |
| Tool holders with rectangular shank for indexable inserts Part 10: Style N | |
| Tool holders with rectangular shank for indexable inserts Part 11: Style R | |
| Tool holders with rectangular shank for indexable inserts Part 12: Style S | |
| Tool holders with rectangular shank for indexable inserts Part 13: Style T | |
| Tool holders with rectangular shank for indexable inserts Part 14: Style H | |
| Tool holders with rectangular shank for indexable inserts Part 15: Style V | |
| Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions | |
| Tool holders with rectangular shank for indexable inserts Part 2: Style A | |
| Tool holders with rectangular shank for indexable inserts Part 3: Style B | |
| Tool holders with rectangular shank for indexable inserts Part 4: Style D | |
| Tool holders with rectangular shank for indexable inserts Part 5: Style F | |
| Tool holders with rectangular shank for indexable inserts Part 6: Style G | |
| Tool holders with rectangular shank for indexable inserts Part 7: Style J | |
| Tool holders with rectangular shank for indexable inserts Part 8: Style K | |
| Tool holders with rectangular shank for indexable inserts Part 9: Style L | |
| Tracked Changes (Redline) - Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions | |
| Tracked Changes (Redline) - Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate precision and alternative designs for collaborative studies | |
| Tracked Changes (Redline) - Adhesives - Floor covering adhesives and products for flooring installation - Assessment and classification of low volatile organic compound (VOC) products | |
| Tracked Changes (Redline) - Agricultural tractors and machinery - General purpose quick-action hydraulic couplers | |
| Tracked Changes (Redline) - Animal feeding stuffs - Determination of crude ash | |
| Tracked Changes (Redline) - Asset management - Asset management system - Requirements | |
| Tracked Changes (Redline) - Asset management \x97 Vocabulary, overview and principles | |
| Tracked Changes (Redline) - Bicycle tyres and rims - Part 1: Tyre designations and dimensions | |
| Tracked Changes (Redline) - Bicycle tyres and rims - Part 2: Rims | |
| Tracked Changes (Redline) - Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder | |
| Tracked Changes (Redline) - Bonded abrasive products - Dimensions - Part 15: Cutting-off wheels on stationary or mobile cutting-off machines | |
| Tracked Changes (Redline) - Bonded abrasive products - Dimensions - Part 16: Cutting-off wheels on hand held power tools | |
| Tracked Changes (Redline) - Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging on stationary machine | |
| Tracked Changes (Redline) - Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding | |
| Tracked Changes (Redline) - Cardiovascular implants and extracorporeal systems - Cardiac valve repair devices | |
| Tracked Changes (Redline) - Coal - Determination of mineral matter | |
| Tracked Changes (Redline) - Coal and coke - Determination of carbon and hydrogen - High temperature combustion method | |
| Tracked Changes (Redline) - Coke - Determination of bulk density in a small container | |
| Tracked Changes (Redline) - Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types | |
| Tracked Changes (Redline) - Fluid power systems and components - Vocabulary | |
| Tracked Changes (Redline) - Graphic technology - Symbols for text proof correction | |
| Tracked Changes (Redline) - Hard coal - Determination of ash fusibility | |
| Tracked Changes (Redline) - Hard coal and coke - Determination of volatile matter | |
| Tracked Changes (Redline) - Harvesting equipment \x97 Blades for agricultural rotary mowers \x97 Requirements | |
| Tracked Changes (Redline) - Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications | |
| Tracked Changes (Redline) - Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tung stennickel | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials Part 12: Wrought cobalt-chromium-moly bdenum alloy | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy | |
| Tracked Changes (Redline) - Implants for surgery - Ultra-high molecular-weight polyethylene Part 3: Accelerated ageing methods | |
| Tracked Changes (Redline) - Implants for surgery - Ultra-high-molecular -weight polyethylene - Part 1: Powder form | |
| Tracked Changes (Redline) - Implants for surgery - Ultra-high-molecular -weight polyethylene Part 5: Morphology assessment method | |
| Tracked Changes (Redline) - Implants for surgery \x97 Metallic materials \x97 Part 11: Wrought titanium 6-aluminium 7-niobium alloy | |
| Tracked Changes (Redline) - Implants for surgery \x97 Metallic materials \x97 Part 4: Cobalt-chromium-moly bdenum casting alloy | |
| Tracked Changes (Redline) - Implants for surgery \x97 Metallic materials Part 9: Wrought high nitrogen stainless steel | |
| Tracked Changes (Redline) - Implants for surgery \x97 Ultra-high-molecular -weight polyethylene \x97 Part 4: Oxidation index measurement method | |
| Tracked Changes (Redline) - Industrial trucks \x97 Overhead guards \x97 Specification and testing | |
| Tracked Changes (Redline) - Instant tea in solid form - Specification | |
| Tracked Changes (Redline) - Leather - Bovine wet blue - Specification | |
| Tracked Changes (Redline) - Leather - Wet blue sheep skins - Specification | |
| Tracked Changes (Redline) - Leather \x97 Wet blue goat skins \x97 Specification | |
| Tracked Changes (Redline) - Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods | |
| Tracked Changes (Redline) - Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2\xb0) | |
| Tracked Changes (Redline) - Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10\xb0) | |
| Tracked Changes (Redline) - Paper and board - Determination of colour by diffuse reflectance - Part 3: Indoor illumination conditions (D50/2\xb0) | |
| Tracked Changes (Redline) - Plastics - Joining of thermoplastic moulded components - Specification for quality levels for imperfections | |
| Tracked Changes (Redline) - Pliers and nippers - Engineer's and Lineman's pliers - Dimensions and test values | |
| Tracked Changes (Redline) - Pliers and nippers \x97 General technical requirements | |
| Tracked Changes (Redline) - Reaction-to-fire tests \x97 Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) | |
| Tracked Changes (Redline) - Rolling bearings - Vocabulary | |
| Tracked Changes (Redline) - Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions | |
| Tracked Changes (Redline) - Rubber - Determination of adhesion to rigid materials using conical shaped parts | |
| Tracked Changes (Redline) - Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content | |
| Tracked Changes (Redline) - Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content | |
| Tracked Changes (Redline) - Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength | |
| Tracked Changes (Redline) - Rubber building gaskets \x97 Materials for preformed solid vulcanized structural gaskets \x97 Specification | |
| Tracked Changes (Redline) - Rubber compounding ingredients - Silica, precipitated, hydrated - Part 1: Non-rubber tests | |
| Tracked Changes (Redline) - Rubber, vulcanized - Determination of adhesion to wire cord | |
| Tracked Changes (Redline) - Ships and marine technology - Drain facilities from oil and water tanks | |
| Tracked Changes (Redline) - Ships and marine technology - Embarkation ladders | |
| Tracked Changes (Redline) - Ships and marine technology - Guardrails for cargo ships | |
| Tracked Changes (Redline) - Ships and marine technology - Manholes with bolted covers | |
| Tracked Changes (Redline) - Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance | |
| Tracked Changes (Redline) - Synchronous belts \x97 Calculation of power rating and drive centre distance | |
| Tracked Changes (Redline) - Tractors and machinery for agriculture and forestry - Hydraulic coupling - Braking circuit | |
| Tracked Changes (Redline) - Tractors for agriculture and forestry - Roll-over protective structures - Static test method and acceptance conditions | |
| Tracked Changes (Redline) \x96 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method | |
| Tracked Changes (Redline) \x96 Implants for surgery - Ultra-high-molecular -weight polyethylene Part 2: Moulded forms | |
| Tracked Changes (Redline) \x96 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification | |
| Tractors and machinery for agriculture and forestry - Hydraulic coupling - Braking circuit | |
| Tractors for agriculture - Operator's field of vision | |
| Tractors for agriculture and forestry - Roll-over protective structures (ROPS) - Static test method and acceptance conditions | |
| Turbocompressors Performance test code | |
| Turning and copying tool holders and cartridges for indexable inserts - Designation | |
| Vertiports \x97 Infrastructure and equipment for vertical take-off and landing (VTOL) of electrically powered cargo unmanned aircraft systems (UAS) | |
| Water Quality - Sampling - Part 17: Guideance on Sampling of Suspended Sediments | |
| Water Quality - Sampling - Part 18: Guideance on Sampling of SGroundwater at Contaminated Sites | |
| Water quality - Sampling - Part 20: Guidance on the use of sampling data for decision making - Compliance with thresholds and classification systems | |
| Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems | |
| Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams | |
| Water quality - Sampling Part 11: Guidance on sampling of groundwaters | |
| Water quality - Sampling Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes | |
| Water quality - Sampling Part 22: Guidance on the design and installation of groundwater monitoring points | |
| Water quality - Sampling Part 26: Guidance on sampling for the parameters of the oceanic carbon dioxide system | |
| Water quality - Sampling Part 27: Guidance on sampling for microplastics in water | |
| Water quality - Vocabulary - Part 1 | |
| Water quality - Vocabulary - Part 2 | |
| Water quality - Vocabulary - Part 5 | |
| Water quality - Vocabulary - Part 6 | |
| Water Quality - Vocabulary - Part 8 | |
| Water quality - Vocabulary | |
| Water quality \x97 Sampling Part 10: Guidance on sampling of waste water | |
| Water quality \x97 Sampling Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas | |
| Water quality \x97 Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling | |
| Water quality \x97 Sampling Part 24: Guidance on the auditing of water quality sampling | |
| Water quality \x97 Sampling Part 4: Guidance on sampling from lakes, natural and man-made | |
| Water Quality Vocabulary - Part 3 | |
| Water quality Vocabulary Part 2 | |
| Water quality Vocabulary Part 7 | |
| Wheat - Determination of the sedimentation index - Zeleny test | |
| Wheat flour (Triticum aestivum L.) - Physical characteristics of doughs - Part 4: Determination of rheological properties using an alveograph | |
| Wood flooring and parquet - Vocabulary |
| << Prev | Next >> |