Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
260
270
280
290
300
310
316
317
318
319
320
321
322
323
324
325
326
327
328
330
340
350
360
370
380
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of Elastic Behaviour of Liquid Adhesives ("Elasticity Index") | |
| Adhesives - Determination of Free Monomer Content in Adhesives Based on Synthetic Polymers | |
| Adhesives for Leather and Footwear Materials - Determination of Optimum Activation Temperatures and Maximum Activation Life of Solvent-Based and Dispersion Adhesives | |
| Adhesives for Leather and Footwear Materials - Lasting Adhesives - Testing Heat Resistance of Bonds at Increasing Temperature | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Shear Resistance | |
| Adhesives for Tiles - Determination of Slip | |
| Advanced technical ceramics \x97 Monolithic ceramics \x97 Part 1: General practice for undertaking corrosion tests | |
| Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas | |
| Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods | |
| Agricultural Machinery - Potato Harvesting Equipment - Safety | |
| Aluminium and Aluminium Alloys - Drawn Wire Part 1: Technical Conditions for Inspection and Delivery | |
| Aluminium and Aluminium Alloys - Drawn Wire Part 2: Mechanical Properties | |
| Aluminium and Aluminium Alloys - Drawn Wire Part 3: Tolerances on Dimensions | |
| Automotive LPG Systems - Installation Requirements | |
| Biotechnology - Guidance on Sampling and Inoculation Procedures | |
| Biotechnology - Performance Criteria for Filter Elements and Filtration Assemblies | |
| Biotechnology - Performance Criteria for Off-Gas Systems | |
| Bitumen and bituminous binders - Determination of breaking behaviour Part 2: Determination of fines mixing time of cationic bituminous emulsions | |
| Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Part 1: Recovery by evaporation | |
| Bitumen and bituminous binders \x97 Determination of breaking behaviour Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method | |
| Bitumen and bituminous binders \x97 Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Part 2: Stabilisation after recovery by evaporation | |
| Bituminous mixtures \x96 Material specifications Part 31: Asphalt Concrete with Bituminous Emulsion | |
| Bituminous mixtures \x97 Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) | |
| Bituminous mixtures Material specifications Part 1: Asphalt Concrete | |
| Bituminous mixtures Material specifications Part 20: Type Testing | |
| Bituminous mixtures Material specifications Part 21: Factory Production Control | |
| Bituminous mixtures Material specifications Part 2: Asphalt Concrete for very thin layers | |
| Bituminous mixtures Material specifications Part 3: Soft Asphalt | |
| Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt | |
| Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt | |
| Bituminous mixtures Material specifications Part 6: Mastic Asphalt | |
| Bituminous mixtures Material specifications Part 7: Porous Asphalt | |
| Bituminous mixtures Material specifications Part 8: Reclaimed asphalt | |
| Blank Detail Specification: Aluminium Electrolytic Capacitors with Non-Solid Electrolyte | |
| Blank Detail Specification: Fixed Capacitors with Metallized Electrodes and Polypropylene Dielectric | |
| Building Hardware - Cylinders for Locks - Requirements and Test Methods | |
| Carbon Fibre Yarns - Part 2: Test Methods and General Specifications | |
| Cathodic Protection of Buried or Immersed Metallic Structures - General Principles and Application for Pipelines | |
| Ceramic machines - Safety - Loading and unloading of fine clay tiles | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency use - Sodium Dichloroisocyanurate , Anhydrous | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency Use - Sodium Dichloroisocyanurate , Dihydrate | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency Use - Trichloroisocyanuric Acid | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Peroxodisulfate | |
| Chemicals used for treatment of water intended for human consumption Aluminium-based coagulants Analytical methods | |
| Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods | |
| Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys | |
| Chimneys System chimneys with clay/ceramic flue liners Part 1: Requirements and test methods for sootfire resistance | |
| Chimneys System chimneys with clay/ceramic flue liners Part 2: Requirements and test methods under wet conditions | |
| Clay Roofing Tiles for Discontinuous Laying - Products Definitions and Specifications | |
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements | |
| Coating plants Spray booths for application of organic powder coating material Safety requirements | |
| Connections for Gas Sampling Tubes to Anaesthetic and Respiratory Equipment | |
| Cookware - Domestic Cookware for Use on Top of a Stove, Cooker or Hob - Part 1: General Requirements | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob Part 2: General requirements for ceramic cookware and glass lid | |
| Cookware \x97 Domestic cookware for use on top of a cooking range or hob Part 2: Additional requirements for ceramic cookware and glass lid | |
| Crane safety - General design - Part 2: Load effects | |
| Crane safety General design Part 1: General principles and requirements | |
| Crane safety General design Part 2: Load effects | |
| Cranes - General design - Part 1: General principles and requirements | |
| Cranes - General Design Part 3-1: Limit States and proof competence of steel structure | |
| Cranes - General design Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | |
| Cranes - General design Part 3-3: Limit states and proof of competence of wheel/rail contacts | |
| Cranes - General design Part 3-4: Limit states and proof of competence of machinery - Bearings | |
| Cranes - General design Part 3-5: Limit states and proof of competence of forged hooks | |
| Cranes - General design Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | |
| Cranes - Loader cranes | |
| Cranes - Mobile cranes | |
| Cranes \x97 General design Part 3-6: Limit states and proof of competence of machinery \x97 Hydraulic cylinders | |
| Cranes Loader cranes | |
| Cranes Mobile cranes | |
| Curtain Walling - Resistance to Wind Load - Performance Requirements | |
| Curtain walling - Terminology | |
| Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray | |
| Curtain Walling - Watertightness - Site Test | |
| Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A-Type D | |
| Devices to prevent pollution by backflow of potable water \x97 Air gap with submerged feed incorporating air inlet plus overflow \x97 Family A, type C | |
| Devices to prevent pollution by backflow of potable water \x97 Unrestricted air gap \x97 Family A \x97 Type A | |
| Devices to prevent pollution by backflow of potable water Air gap with non-circular overflow (unrestricted) Family A, type B | |
| Door Leaves - Determination of the Behaviour under Humidity Variations in Successive Uniform Climates | |
| Feather and Down - Composition Labelling of Processed Feathers and Down for Use as Sole Filling Material | |
| Feather and Down - Hygiene and Cleanliness Requirements | |
| Fertilizers and Liming Materials - Vocabulary - Part 1: General Terms | |
| Fertilizers and Liming Materials - Vocabulary - Part 3: Terms Relating to Liming Materials | |
| Fertilizers and Liming Materials and Soil Improvers - Vocabulary - Part 2: Terms Relating to Fertilizers | |
| Filler Materials for Thermoplastics - Scope, Designation, Requirements, Tests | |
| Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roofing - Method of Artificial Ageing by Long Term Exposure to Elevated Temperature | |
| Flexible Sheets for Waterproofing - Underlays for Discontinuous Roofing and Walls - Determination of Resistance to Water Penetration | |
| Flexible sheets for waterproofing \x97 Bitumen, plastic and rubber sheets for roof waterproofing \x97 Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature... | |
| Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements | |
| Food processing machinery Portable and/or hand-guided machines and appliances with mechanically driven cutting tools Safety and hygiene requirements | |
| Foodstuffs - Determination of Aflatoxin B1, and the Sum of Aflatoxins B1, B2, G1 and G2 in Cereals, Shell-Fruits and Derived Products - High Performance Liquid Chromatographic Method with Post... | |
| Footwear - Test Methods for Shanks - Fatigue Resistance | |
| Footwear - Test Methods for Shanks - Longitudinal Stiffness | |
| Footwear - Test Methods for Whole Shoe - Water Resistance | |
| Footwear manufacturing wastes Waste classification and management | |
| Free-Standing Chimneys Part 2: Concrete Chimneys | |
| Free-standing chimneys Part 5: Material for brick liners Product specifications | |
| Free-standing chimneys Part 6: Steel liners Design and execution | |
| Free-standing chimneys Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners | |
| Free-standing chimneys Part 9: Lifetime management - Monitoring, inspection, maintenance, remedial and reporting; Operations and actions required | |
| Free-Standing Industrial Chimneys - Part 1: General Requirements | |
| Free-standing industrial chimneys Part 4: Brick liners Design and execution | |
| Free-standing industrial chimneys Part 8: Design and execution of mast construction with satellite components | |
| General Requirements for Components Used in Pneumatically Pressurized Discharge Pipes, Drains and Sewers | |
| Generic Specification: Fixed Capacitors | |
| Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing | |
| Glass in building - Structural sealant glazing - Part 2: Assembly rules | |
| Glass in Building - Thermally Toughened Borosilicate Safety Glass - Part 1: Definition and Description | |
| Glass in building Structural sealant glazing Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing | |
| Glass in building Structural sealant glazing Part 2: Assembly rules | |
| Glass in building Thermally toughened borosilicate safety glass Part 2: Evaluation of conformity/Product standard | |
| Greenhouses - Design and construction - Part 1: Commercial production greenhouses | |
| Greenhouses - Design and construction Part 2: Greenhouses open to the public | |
| Harmonized System of Quality Assessment for Electronic Components Assessment for Electronic Componenets Sectional Specification: Tantalum Surface Mounting Capacitors | |
| Harmonized system of quality assessment for electronic components Blank detail specification: Fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level E | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Metallized Polycarbonate Film Dielectric Capacitors for Direct Current - Assessment Level EZ | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Polyethylene-Terepht halate Film Dielectric Metal Foil Capacitors for Direct Current - Assessment Level EZ | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Polystyrene Film Dielectric Metal Foil d.c. Capacitors - Assessment Level E | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Polystyrene Film Dielectric Metal foil d.c.Capacitors - Assessment Level EZ | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte, Porous Anode (Sub-Family 2) | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte, Porous Anode (Sub-Family 3) | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Aluminium Electrolytic Capacitors with Solid and Non-Solid Electrolyte | |
| Harmonized system of quality assessment for electronic components Sectional Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Fixed Polyethylene-Terepht halate Film Dielectric Metal Foil Capacitors for Direct Current | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Fixed Polystyrene Film Dielectric Metal Foil d.c. Capacitors | |
| Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terepht halate film dielectric metal foil capacitors for direct current. Assessment level E | |
| Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current | |
| Health informatics - Service architecture - Part 1: Enterprise viewpoint | |
| Health informatics - Service architecture - Part 2: Information viewpoint | |
| Health informatics - Service architecture - Part 3: Computational viewpoint | |
| Hygrothermal Performance of Building Materials and Products - Determination of Hygric Expansion Coefficient | |
| Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves | |
| Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods | |
| Industrial, commercial and garage doors and gates Safety devices for power operated doors and gates Requirements and test methods | |
| Influence of Materials on Water Intended for Human Consumption - Organic Materials - Determination of Colour and Turbidity of Water in Piping Systems - Part 1: Test Method | |
| Inland Navigation Vessels - Connections for the Discharge of Oily Mixture | |
| Inland Navigation Vessels - Connections for the Discharge of Waste Water | |
| Inland Navigation Vessels - Stairs with Inclination Angles of 30\xb0 to Less Than 45\xb0 - Requirements, Types | |
| Inserted Flange Type Closure Systems for Steel Drums with a Total Capactiy of 17 l to 230 l | |
| Intermodal Loading Units - Marking Part 1: Markings for identification | |
| Intermodal Loading Units - Marking Part 2: Markings of swap bodies related to rail operation | |
| Intermodal Loading Units - Marking Part 3: Markings of semi-trailers related to rail operation | |
| Internal blinds - Performance requirements including safety | |
| Internal blinds Performance requirements including safety | |
| Ladders - Part 1: Terms, types, functional sizes | |
| Ladders Part 1: Specification for Terms, Types, Functional Sizes | |
| Ladders Part 1: Terms, types, functional sizes | |
| Ladders Part 2: Specification for Requirements, Testing, Marking | |
| Lead and Lead Alloys - Lead Oxides | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 1: Measurement and file format | |
| Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 4: LED lamps, modules and luminaires | |
| Light and lighting \x96 Measurement and presentation of photometric data of lamps and luminaires Part 5: Presentation of data for luminaires used for road lighting | |
| Light and lighting \x97 Light and lighting \x97 Measurement and presentation of photometric data of lamps and luminaires Part 4: LED lamps, modules and luminaires | |
| Light and lighting Measurement and presentation of photometric data of lamps and luminaires Part 1: Measurement and file format | |
| Light and lighting Measurement and presentation of photometric data of lamps and luminaires Part 2: Presentation of data for indoor and outdoor work places | |
| Lightweight Aggregates - Part 1: Lightweight Aggregates for Concrete, Mortar and Grout | |
| Lightweight aggregates Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications | |
| Lightweight aggregates | |
| Liming Materials - Determination of Calcium Content and Magnesium Content - Complexometric Method | |
| Liming Materials - Determination of Magnesium Content - Atomic Absorption Spectrometric Method | |
| Liming materials - Determination of neutralizing value - Titrimetric methods | |
| Liming Materials - Determination of Size Distribution by Dry and Wet Sieving | |
| Liming materials Determination of neutralizing value Titrimetric methods | |
| Liquid petroleum products \x96 Vapour pressure \x96 Part 1: Determination of air saturated vapour pressure (ASVP) | |
| Liquid petroleum products \x96 Vapour pressure Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) | |
| LPG equipment and accessories \x97 Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) \x97 Design and construction | |
| LPG tanks Disposal | |
| Machine Tools - Safety - Electro Discharge Machines | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations | |
| Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements Part 3: Cutting machines | |
| Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 3: Cutting machines | |
| Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 4: Tilting tables | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS Machines | |
| Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses | |
| Machines and plants for the manufacture, treatment and processing of hollow glass Safety requirements Part 2: Handling machines for feeding | |
| Machines and plants for the manufacture, treatment and processing of hollow glass Safety requirements Part 5: Presses | |
| Machines for Road Surface Cleaning - Safety Requirements | |
| Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents | |
| Machines for surface cleaning and pretreatment of industrial items using liquids and vapours Part 4: Safety of machines using halogenated solvents | |
| Maintenance for Lifts and Escalators - Rules for Maintenance Instructions | |
| Manufactured Articles Filled with Feather and Down - Method for the Determination of a Filled Product's Total Mass and of the Mass of the Filling | |
| Mastic Asphalt for Waterproofing - Definitions, requirements and Test Methods | |
| Materials and Articles in Contact with Foodstuffs - Non-Metallic Articles for Catering and Industrial Use - Method of Test for the Determination of Impact Resistance | |
| Means for Resealing Threaded Joints of Gas Pipework in Buildings | |
| Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places | |
| Mechanical Vibration and Shock - Vibration Isolation of Machines - Information for the Application of Source Isolation | |
| Methods for the Analysis of Pewter - Determination of Alloying and Impurity Element Contents by Atomic Spectrometry | |
| Mobile Access and Working Towers - Rules and Guidelines for the Preparation of an Instruction Manual | |
| Mountaineering Equipment - Ice Tools - Safety Requirements and Test Methods | |
| Mountaineering equipment - Ice-tools - Safety requirements and test methods | |
| Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 | |
| Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy grades 2 and 3 | |
| Non destructive testing of welded joints in thermoplastics semi-finished products Part 3: Ultrasonic testing | |
| Non Destructive Testing of Welded Joints of Thermoplastics Semi-Finished Products - Part 1: Visual Examination | |
| Non destructive testing of welded joints of thermoplastics semifinished products Part 4: High voltage testing | |
| Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties | |
| Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices | |
| Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays | |
| Non-Destructive Testing - Visual Testing - General Principles | |
| Non-destructive testing of welded joints in thermoplastics semi-finished products Part 2: X-ray radiographic testing | |
| Packaging - Complete, Filled Transport Packages - Test Methods for the Determination of the Centre of Gravity of a Package | |
| Packaging - Flexible Conical Metallic Tubes - Dimensions and Tolerances | |
| Packaging - Flexible Cylindrical Metallic Tubes - Dimensions and Tolerances | |
| Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml | |
| Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and... | |
| Packaging - Light Gauge Metal Packaging - Nominal Filling Volumes for Round Cylindrical and Tapered General Use Metal Containers up to 40 000 ml | |
| Packaging - Light-Gauge Metal Packaging - Nominal Filling Volumes for Non-Round, Cylindrical and Tapered General Use Metal Containers up to 30 000 ml | |
| Packaging - Light-Gauge Metal Packaging - Round Open-Top Cans for Beverage Products with or without Added Gas, Defined by Their Nominal Filling Volumes | |
| Packaging Light gauge metal containers Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000... | |
| Packaging Unit packaging Dimensions and requirements for pegboard display | |
| Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method | |
| Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances | |
| Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures | |
| Para-Aramid Fibre Filament Yarns - Part 1: Designation | |
| Para-Aramid Fibre Filament Yarns - Part 2: Methods of Test and General Specifications | |
| Para-Aramid Fibre Filament Yarns - Part 3: Technical Specifications | |
| Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | |
| Plastics welding personnel Qualification testing of welders Thermoplastics welded assemblies | |
| Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Resistance of Capillary Absorption | |
| Products and systems for the protection and repair of concrete structures \x97 Test method \x97 Determination of thixotropy of products for protection of reinforcement | |
| Protective clothing - Shin guards for association football players - Requirements and test methods | |
| Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) | |
| Protective clothing against liquid chemicals Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) | |
| Protective Helmates - Test Methods - Part 4: Retention System Effectiveness | |
| Protective Helmets - Test Methods - Part 10: Resistance to Radiant Heat | |
| Protective Helmets - Test Methods - Part 1: Conditions and Conditioning | |
| Protective Helmets - Test Methods - Part 2: Shock Absorption | |
| Protective Helmets - Test Methods - Part 3: Resistance to Penetration | |
| Protective Helmets - Test Methods - Part 5: Retention System Strength | |
| Protective Helmets - Test Methods - Part 6: Field of Vision | |
| Protective Helmets - Test Methods - Part 7: Flame Resistance | |
| Protective Helmets - Test Methods - Part 8: Electrical Properties | |
| Railway Applications - Wheelsets and Bogies - Non-Powered Axles - Design Method | |
| Railway Applications - Wheelsets and Bogies - Powered Axles - Design Method | |
| Railway applications - Wheelsets and bogies Part 1: Design method for axles with external journals | |
| Reinforcements - Specification for Textile Glass Chopped Strands - Part 1: Designation | |
| Reinforcements - Specification for Textile Glass Chopped Strands - Part 2: Test Methods and General Requirements | |
| Reinforcements - Specification for Textile Glass Chopped Strands - Part 3: Specific Requirements | |
| Respiratory Protective Devices - Power Assisted Filtering Devices Incorporating Full Face Masks, Half Masks or Quarter Masks - Requirements, Testing, Marking | |
| Respiratory Protective Devices - Powered Filtering Devices Incorporating a Helmet or a Hood - Requirements, Testing, Marking | |
| Road and Airfield Surface Characteristics - Test Methods - Part 1: Measurement of Pavement Surface Macrotexture Depth Using a Volumetric Patch Technique | |
| Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability | |
| Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges | |
| Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness indices | |
| Road and airfield surface characteristics - Test methods Part 5: Determination of longitudinal unevenness indices | |
| Road and airfield surface characteristics Test methods Part 4: Method for measurement of slip/skid resistance of a surface The pendulum test | |
| Road and airfield surface characteristics Test methods Part 7: Irregularity measurement of pavement courses The straightedge test | |
| Road surface treatment machines - Safety requirements | |
| Road surface treatment machines Safety requirements | |
| Road vertical signs - Variable message traffic signs - Part 1: Product standard | |
| Road vertical signs - Variable message traffic signs - Part 2: Initial type testing | |
| Road vertical signs - Variable message traffic signs - Part 3: Factory production control | |
| Road vertical signs - Variable message traffic signs | |
| Road vertical signs \x97 Variable message traffic signs | |
| Round and Sawn Timber - Determination of the Batch Volume of Sawn Timber | |
| Round and Sawn Timber - Method of Measurement of Biological Degrade | |
| Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules | |
| Round and Sawn Timber - Method of Measurement of Features | |
| Round and sawn timber - Methods of measurements Part 3: Features and biological degradations | |
| Safety of Industrial Trucks - Test Methods for Measuring Vibration | |
| Safety requirements for cableway installations designed to carry persons - General requirements Part 1: Requirements for all installations | |
| Safety requirements for cableway installations designed to carry persons - General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes | |
| Safety requirements for cableway installations designed to carry persons - Ropes | |
| Safety requirements for cableway installations designed to carry persons Calculations | |
| Safety requirements for cableway installations designed to carry persons Civil engineering works | |
| Safety requirements for cableway installations designed to carry persons General requirements Part 1: Requirements for all installations | |
| Safety requirements for cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 1: Selection criteria for ropes and their end fixings | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 2: Safety factors | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 4: End fixings | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 5: Storage, transportation, installation and tensioning | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 7: Inspection, repair and maintenance | |
| Safety requirements for cableway installations designed to carry persons Ropes Part 8: Magnetic rope testing (MRT) | |
| Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte | |
| Secure storage units - Classification for high security locks according to their resistance to unauthorized opening | |
| Secure storage units Classification for high security locks according to their resistance to unauthorized opening | |
| Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste | |
| Shell boilers - Part 10: Requirements for feedwater and boiler water quality | |
| Shell Boilers - Part 1: General | |
| Shell Boilers - Part 2: Materials for Pressure Parts of Boilers and Accessories | |
| Shell Boilers - Part 3: Design and Calculation for Pressure Parts | |
| Shell Boilers - Part 4: Workmanship and Construction of Pressure Parts of the Boiler | |
| Shell Boilers - Part 5: Inspection During Construction, Documentation and Marking of Pressure Parts of the Boiler | |
| Shell Boilers - Part 6: Requirements for Equipment for the Boiler | |
| Shell boilers - Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers | |
| Shell boilers - Part 8: Requirements for safeguards against excessive pressure | |
| Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories | |
| Shell boilers Part 11: Acceptance tests | |
| Shell boilers Part 12: Requirements for grate firing systems for solid fuels for the boiler | |
| Shell boilers Part 13: Operating instructions | |
| Small steam sterilizers | |
| Soil Improvers and Growing Media - Determination of Electrical Conductivity | |
| Soil Improvers and Growing Media - Determination of Organic Matter Content as Ash | |
| Soil Improvers and Growing Media - Determination of pH | |
| Soil Improvers and Growing Media - Determination of Physical Properties - Dry Bulk Density, Air Volume, Water Volume, Shrinkage Value and Total Pore Space | |
| Soil Improvers and Growing Media - Sample Preparation for Chemical and Physical Test, Determination of Dry Matter Content, Moisture Content and Laboratory Compacted Bulk Density | |
| Solar collectors - General requirements | |
| Solid Wood Panels - Classification by Surface Appearance - Part 1: Softwood | |
| Solid Wood Panels - Classification by Surface Appearance - Part 2: Hardwood | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied Part 1: General requirements | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied Part 2: Additional requirements for underground or partly underground systems | |
| Stationary waste containers up to 5 000 l, top lifted and bottom emptied Part 3: Recommended lifting connections | |
| Steel Drums - Non-Removable Head (Tight Head) Drums with a Nominal Capacity of 20 l to 60 l | |
| Steel Drums - Removable Head (Open Head) Drums with a Nominal Capacity of 15 l to 62 l | |
| Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity | |
| Structural Design of Buried Pipelines under Various Conditions of Loading Part 1: General Requirements | |
| Surface Active Agents - Determination of the 1,4-Dioxane Content in Alkyl-Ethoxy-Sulfate Products by GLC/Head Space Procedure | |
| Swap Bodies - Coding, Identification and Marking | |
| Tanks for the transport of dangerous goods \x97 Metallic gravity-discharge tanks \x97 Design and construction | |
| Tanks for the transport of dangerous goods Metallic tanks with a working pressure not exceeding 0,5 bar Design and construction | |
| Tanks for Transport of Dangerous Goods - Service Equipment for Tanks - Adapter for Bottom Loading and Unloading | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler | |
| Tanks for Transport of Dangerous Goods - Service Equipment for Tanks - Vapour Transfer Valve | |
| Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks | |
| Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adapter and coupler | |
| Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks | |
| Tannery machines - Roller coating machines - Safety requirements | |
| Tannery machines - Rotating process vessels - Safety requirements | |
| Tannery machines - Splitting and bandknife shearing machines - Safety requirements | |
| Tannery Machines Roller Coating Machines Safety Requirements | |
| Tannery Machines Rotating Process Vessels Safety Requirements | |
| Tannery Machines Splitting and Bandknife Shearing Machines Safety Requirements | |
| Textile Floor Coverings - Classification of Pile Carpets | |
| Textile floor coverings \x97 Classification | |
| Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium... | |
| Thermal solar systems and components - Custom built systems Part 1: General requirements for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems Part 2: Test methods for solar water heaters and combisystems | |
| Thermal solar systems and components - Custom built systems Part 3: Performance test methods for solar water heater stores | |
| Thermal solar systems and components - Custom built systems Part 4: Performance test methods for solar combistores | |
| Thermal solar systems and components - Custom built systems Part 5: Performance test methods for control equipment | |
| Thermal Solar Systems and Components - Factory Made Systems Part 1: General Requirements | |
| Thermal Solar Systems and Components - Factory Made Systems Part 2: Test Methods | |
| Thermal Solar Systems and Components - Solar Collectors - Part 1: General Requirements | |
| Thermal Solar Systems and Components - Solar Collectors - Part 2: Test Methods | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Determination of breaking behaviour Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Determination of breaking behaviour Part 2: Determination of fines mixing time of cationic bituminous emulsions | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Part 1: Recovery by evaporation | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Part 2: Stabilization after recovery by evaporation | |
| Tracked Changes (Redline) - Bituminous mixtures - Material specifications Part 20: Type Testing | |
| Tracked Changes (Redline) - Bituminous mixtures - Material specifications Part 21: Factory Production Control | |
| Tracked Changes (Redline) - Bituminous mixtures - Material specifications Part 5: Stone Mastic Asphalt | |
| Tracked Changes (Redline) - Bituminous mixtures - Material specifications Part 7: Porous Asphalt | |
| Tracked Changes (Redline) - Bituminous mixtures \x97 Material specifications Part 1: Asphalt Concrete | |
| Tracked Changes (Redline) - Bituminous mixtures \x97 Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) | |
| Tracked Changes (Redline) - Bituminous mixtures \x97 Material specifications Part 3: Soft Asphalt | |
| Tracked Changes (Redline) - Bituminous mixtures \x97 Material specifications Part 6: Mastic Asphalt | |
| Tracked Changes (Redline) - Bituminous mixtures \x97 Material specifications Part 8: Reclaimed asphalt | |
| Tracked Changes (Redline) - Building hardware \x97 Cylinders for locks \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Aluminium-based coagulants \x97 Analytical methods | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Chemicals for emergency use \x97 Sodium dichloroisocyanurate , anhydrous | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Chemicals for emergency use \x97 Sodium dichloroisocyanurate , dihydrate | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Chemicals for emergency use \x97 Trichloroisocyanuric acid | |
| Tracked Changes (Redline) - Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements | |
| Tracked Changes (Redline) - Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 2: General requirements for ceramic cookware and glass lid | |
| Tracked Changes (Redline) - Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks | |
| Tracked Changes (Redline) - Cranes. General design Limit states and proof competence of steel structure | |
| Tracked Changes (Redline) - Curtain walling - Resistance to wind load - Performance requirements | |
| Tracked Changes (Redline) - Curtain walling \x97 Terminology | |
| Tracked Changes (Redline) - Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B | |
| Tracked Changes (Redline) - Feather and down - Composition labelling of processed feathers and down for use as sole filling material | |
| Tracked Changes (Redline) - Fertilizers and liming materials \x96 Vocabulary Part 3: Terms relating to liming materials | |
| Tracked Changes (Redline) - Free-standing chimneys - Part 1: General requirements | |
| Tracked Changes (Redline) - Free-standing chimneys Part 6: Steel liners \x97 Design and execution | |
| Tracked Changes (Redline) - General principles of cathodic protection of buried or immersed onshore metallic structures | |
| Tracked Changes (Redline) - Industrial, commercial and garage doors and gates and pedestrian doorsets \x97 Protective devices for power operated doors and gates \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Inland navigation vessels - Connections for the discharge of waste water | |
| Tracked Changes (Redline) - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of workplaces | |
| Tracked Changes (Redline) - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 2: Presentation of data for indoor and outdoor work places | |
| Tracked Changes (Redline) - Liming materials \x97 Determination of the calcium content and magnesium content \x97 Complexometric method | |
| Tracked Changes (Redline) - Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) | |
| Tracked Changes (Redline) - Liquid petroleum products \x97 Vapour pressure \x97 Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple expansion method) | |
| Tracked Changes (Redline) - LPG equipment and accessories - Automotive LPG-systems - Installation requirements | |
| Tracked Changes (Redline) - LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction | |
| Tracked Changes (Redline) - Non destructive testing of welded joints of thermoplastics semi-finished products Part 1: Visual examination | |
| Tracked Changes (Redline) - Non-destructive testing - Visual testing - General principles | |
| Tracked Changes (Redline) - Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances | |
| Tracked Changes (Redline) - Packaging \x97 Flexible aluminium tubes \x97 Internal lacquer film thickness measurement method | |
| Tracked Changes (Redline) - Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | |
| Tracked Changes (Redline) - Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking | |
| Tracked Changes (Redline) - Respiratory protective devices \x97 Powered filtering devices incorporating a loose fitting respiratory interface \x97 Requirements, testing, marking | |
| Tracked Changes (Redline) - Road and airfield surface characteristics \x97 Test methods Part 8: Determination of transverse unevenness and crossfall indices | |
| Tracked Changes (Redline) - Road surface treatment machines - Safety requirements | |
| Tracked Changes (Redline) - Safety requirements for cableway installations designed to carry persons - Calculations | |
| Tracked Changes (Redline) - Safety requirements for cableway installations designed to carry persons - General requirements Part 1: Requirements for all installations | |
| Tracked Changes (Redline) - Secure storage units - Classification for high security locks according to their resistance to unauthorized opening | |
| Tracked Changes (Redline) - Shell Boilers - Part 6: Requirements for equipment for the boiler | |
| Tracked Changes (Redline) - Shell boilers \x97 Part 9: Requirements for limiting devices of the boiler and accessories | |
| Tracked Changes (Redline) - Shell boilers Part 3: Design and calculation for pressure parts | |
| Tracked Changes (Redline) - Shell boilers Part 4: Workmanship and construction of pressure parts of the boiler | |
| Tracked Changes (Redline) - Solar collectors - General requirements | |
| Tracked Changes (Redline) - Stationary waste containers up to 5 000 l, top lifted and bottom emptied Part 1: General requirements | |
| Tracked Changes (Redline) - Stationary waste containers up to 5 000 l, top lifted and bottom emptied Part 2: Additional requirements for underground or partly underground systems | |
| Tracked Changes (Redline) - Sterilizers for medical purposes \x97 Small steam sterilizers \x97 Requirements and testing | |
| Tracked Changes (Redline) - Structural design of buried pipelines under various conditions of loading Part 1: General requirements | |
| Tracked Changes (Redline) - Tanks for the transport of dangerous goods \x97 Metallic tanks with a working pressure not exceeding 0,5 bar \x97 Design and construction | |
| Tracked Changes (Redline) - Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks | |
| Tracked Changes (Redline) - Thermal solar systems and components - Custom built systems Part 1: General requirements for solar water heaters and combisystems | |
| Tracked Changes (Redline) - Thermal solar systems and components - Custom built systems Part 2: Test methods for solar water heaters and combisystems | |
| Tracked Changes (Redline) - Thermal solar systems and components - Custom built systems Part 4: Performance test methods for solar combistores | |
| Tracked Changes (Redline) - Thermal solar systems and components - Custom built systems Part 5: Performance test methods for control equipment | |
| Tracked Changes (Redline) - Thermal solar systems and components - Factory made systems Part 1: General requirements | |
| Tracked Changes (Redline) - Thermal solar systems and components - Factory made systems Part 2: Test methods | |
| Tracked Changes (Redline) - Thermal solar systems and components \x96 Custom built systems Part 3: Performance test methods for solar water heater stores | |
| Tracked Changes (Redline) - Value Management | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations \x97 Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations \x97 Part 5: Workmanship and construction of pressure parts of the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations \x97 Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler | |
| Tracked Changes (Redline) - Water-tube boilers and auxiliary installations Part 1: General | |
| Tracked Changes (Redline) - Windows and doors \x97 Soft and heavy body impact \x97 Test method, safety requirements and classification | |
| Tracked Changes (Redline) \x96 Cranes - General design Part 1: General principles and requirements | |
| Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | |
| Tractors and machinery for agriculture and forestry Power take-off (PTO) drive shafts and their guards Safety | |
| Transport Packaging - Reusable, Rigid Plastics Distribution Boxes - Part 1: General Purpose Application | |
| Transport Packaging - Reusable, Rigid Plastics Distribution Boxes - Part 2: General Specifications for Testing | |
| Transport Services - Goods Transport Chains - System for Declaration of Performance Conditions | |
| Transportable gas cylinders - Conditions for filling gas mixtures into receptacles | |
| Transportable gas cylinders Conditions for filling gases into receptacles Single component gases | |
| Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) Design and construction | |
| Value Management | |
| Ventilation for buildings - Air handling units - Rating and performance for units, components and sections | |
| Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections | |
| Ventilation for Buildings - Terminals - Performance Testing of Louvres Subjected to Simulated Rain | |
| Wallcoverings \x97 Specification for cork rolls | |
| Wallcoverings in Roll form - Determination of Dimensions, Straightness, Spongeability and Washability | |
| Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories | |
| Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality | |
| Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler | |
| Water-tube boilers and auxiliary installations - Part 1: General | |
| Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories | |
| Water-tube boilers and auxiliary installations - Part 3: Design and calculation of pressure parts | |
| Water-Tube Boilers and Auxiliary Installations - Part 4: In-Service Boiler Life Expectancy Calculations | |
| Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler | |
| Water-Tube Boilers and Auxiliary Installations - Part 6: Inspection During Construction; Documentation and Marking of Pressure Parts of the Boiler | |
| Water-Tube Boilers and Auxiliary Installations - Part 7: Requirements for Equipment for the Boiler | |
| Water-Tube Boilers and Auxiliary Installations - Part 8: Requirements for Firing Systems for Liquid and Gaseous Fuels for the Boiler | |
| Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler | |
| Water-tube boilers and auxiliary installations Part 10: Requirements for safeguards against excessive pressure | |
| Water-tube boilers and auxiliary installations Part 13: Requirements for flue gas cleaning systems | |
| Water-tube boilers and auxiliary installations Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution | |
| Water-tube boilers and auxiliary installations Part 15: Acceptance tests | |
| Water-tube boilers and auxiliary installations Part 18: Operating instructions | |
| Windows - Classification of Mechanical Properties - Racking, Torsion and Operating Forces | |
| Windows - Soft and heavy body impact - Test method, safety requirements and classification | |
| Winter service machines - Safety requirements | |
| Winter service machines Safety requirements | |
| Workplace Atmosphere - Guidelines for Measurement of Airborne Micro-Organisms and Endotoxin |
| << Prev | Next >> |