Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
220
230
240
250
260
270
275
276
277
278
279
280
281
282
283
284
285
286
287
290
300
310
320
330
340
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| ACETYLENE, TECHNICAL, DISSOLVED | |
| ADDENDA TO B96.1-1986 WELDED ALUMINUM-ALLOY STORAGE TANKS | |
| Ajustements Normalises Pour Pieces D'Assemblage Dimensions En Pouces | |
| Automatic Receptacle Control to Meet Energy-Efficiency Requirements in Codes and Standards IECC, ASHRAE 90.1, and California Title 24 | |
| B95.1 Terminology for Pressure Relief Devices | |
| Banking - Key Management (Retail) - Part 1: Introduction to Key Management (CEN EN ISO 11568-1: 1996) | |
| Banking - Key Management (Retail) - Part 2: Key Management Techniques for Symmetric Ciphers (CEN EN ISO 11568-2: 1996) | |
| Banking - Key Management (Retail) - Part 3: Key Life Cycle for Symmetric Ciphers (CEN EN ISO 11568-3: 1996) | |
| Banking - Personal Identification Number Management and Security - Part 1: PIN Protection Principles and Techniques (CEN EN 29564-1: 1993) | |
| Banking - Personal Identification Number Management and Security - Part 2: Approved Algorithm(s) for PIN Encipherment First Edition (CEN EN 29564-2: 1993) | |
| Basic and Advanced Regulatory Control: System Design and Application | |
| Basic Nomenclature and Definitions for Single-Point Cutting Tools | |
| BASIC PETROLEUM DATA BOOK (RENEWAL) *** SUBSCRIPTION ISSUED TWICE A YEAR *** | |
| BASIC PETROLEUM DATA BOOK *** SUBSCRIPTION ISSUED TWICE A YEAR *** | |
| Basic Powder Metallurgy Video | |
| Basic Preventive Maintenance For Mechanical Refrigeration Systems Poster | |
| Basics of Fluid Dynamics for Metalcasting Gating Systems | |
| Basics of Heat Transfer Principles for Riser Design | |
| BASIS OF SEISMIC DESIGN PROVISIONS FOR WELDED STEEL OIL STORAGE TANKS | |
| Bayesian Analysis with Python | |
| BCI Horizon Scan Report 2021 | |
| BeagleBone Robotic Projects | |
| Beginning C++ Game Programming | |
| BELT CONVEYORS FOR BULK MATERIALS (2ND PRINTING) | |
| Benzyl acetate CAS # 140-11-4 ORAL RISK ASSESSMENT DOCUMENT | |
| BENZYL ALCOHOL CAS # 100-51-6 ORAL RISK ASSESSMENT DOCUMENT | |
| Biological evaluation of medical devices\x97 Part 10: Tests for irritation and delayed-type hypersensitivity | |
| Biological evaluation of medical devices\x97Part 18: Chemical characterization of materials | |
| Biopharmaceutical Manufacturing Facilities | |
| BLANKS AND SEMI-FINISHED BLANKS FOR SOLID CARBIDE TAPS | |
| BLANKS FOR CARBIDE BURS (R 1982) | |
| BLOCKCHAIN TECHNICAL GUIDANCE FOR THE ELECTROINDUSTRY | |
| Blood transfusion microfilters | |
| Bore and Rod Size Combinations and Rod End Configurations for Cataloged Square Head Industrial Fluid Power Cylinders (NFPA T3.5.2) | |
| Brazing Footprints | |
| bridge aesthetics sourcebook | |
| Bridge Data Exchange (BDX) Technical Data Guide | |
| Building for the Future Construction and Renovation of Sterile Processing Facilities | |
| Building System Efficiency Modeling \x97 Improving the Accuracy of Building Energy Modeling: A Study of the Relative Strengths and Weaknesses of Building Energy Modeling Tools and Recommendations for Improvements | |
| Bulk Pharmaceutical Chemicals | |
| BUTANE, PROPANE, AND BUTANE-PROPANE MIXTURES | |
| CAP, SOFTBALL | |
| CARBIDE BLANKS AND SINGLE-POINT BRAZED TOOLS | |
| CARBIDE BLANKS FOR TIPPING CIRCULAR SAWS (R 1978) | |
| CARBIDE CHIP BREAKERS USED WITH INDEXABLE INSERTS FOR CLAMP TYPE HOLDERS | |
| CARBIDE SEATS USED WITH INDEXABLE INSERTS FOR CLAMP TYPE HOLDERS | |
| CARBIDE-TIPPED MASONRY DRILLS AND BLANKS FOR CARBIDE-TIPPED MASONRY DRILLS (R 1982) (WITHDRAWN) | |
| CARBON DIOXIDE (CO2): TECHNICAL AND USP | |
| CARBON DIOXIDE, TECHNICAL: SOLID | |
| Cavity Dimensions for Fluid Power Exclusion Devices (Inch Series) (NFPA T3.19.7 R1) | |
| Cavity Dimensions for Fluid Power Exclusion Devices (Inch Series) | |
| CHLORINE, TECHNICAL: LIQUID | |
| CIRCULAR AND DOVETAILED FORMING TOOL BLANKS AND ASSOCIATE MOUNTING AND CLAMPING ELEMENTS FOR HOLDERS USED ON AUTOMATIC SCREW MACHINES (R 1971) (FORMERLY ASA B5.7-54) | |
| Commissioning and Qualification | |
| COMPRESSED AIR, BREATHING | |
| Determination of the Presence of Entrapped Air | |
| Die Buttons - Basic Ball-Lock (Metric) | |
| Die Buttons - Basic Ball-Lock | |
| Die Buttons - Basic Straight Relief, Press Fit (Metric) | |
| Die Buttons - Basic Taper Relief, Press Fit (Metric) | |
| Die Buttons Basic Straight Relief, Press Fit | |
| Die Buttons Basic Taper Relief, Press Fit | |
| Die Buttons Variable, Press Fit, Headless and Head Type, Step Relief | |
| Die Buttons Variable, Press Fit | |
| Dr. Bob Arnot's Revolutionary Weight Control Program | |
| Drill Drivers, Split-Sleeve, Collet Type | |
| ELECTROCOATING SYSTEM, CATHODIC | |
| Exploring the Dangerous Trades: The Autobiography of Alice Hamilton, M.D. | |
| EXTINGUISHER, FIRE, CARBON DIOXIDE (CO2), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE | |
| Fluid Power Laboratory Guidelines - Information Report (NFPA/T2.12.5-1983) | |
| Fluid Power Systems - Cylinders - Dimensions for Accessories for Catalogued Square Head Industrial Types (NFPA T3.6.8M R1-1984) | |
| Fluid Power Systems and Components - Cylinders - Identification Code for Mounting Dimensions and Mounting Types (Technically Identical to ISO 6099-1985) (Metric Only) | |
| Fluid Power Systems and Components - Multiple Lip Packing Sets - Methods for Measuring Stack Heights; Appendix | |
| Fluid Power Systems and Components - Three-Pin Electrical Plug Connector - Characteristics and Requirements (Metric Only) | |
| Fluid Power Systems and Products - Cylinder Bores and Piston Rod Diameters - Inch Series (NFPA/T3.6.1 R1-1983) | |
| Fluid Systems - O-Rings - Inside Diameters, Cross-Sections, Tolerances and Size Identification Code (Metric Only) | |
| FLUOROCARBON REFRIGERANTS | |
| GAGES - FUNCTIONAL, BALL - LOCK PUNCHES, DIE BUTTONS AND RETAINERS | |
| Gages - Functional, Ball-Lock Punches (Inch) | |
| Gages - Functional, Ball-Lock Punches (Metric) | |
| Gages - Functional, Ball-Lock Punches, Die Buttons and Retainers (Metric) | |
| Gear Shaper Cutters | |
| Groove Dimensions for Floating Type Metallic and Non-Metallic Fluid Power Piston Rings | |
| Guide Manual for Bridge Element Inspection | |
| Guide Specifications for Bridges Vulnerable to Coastal Storms | |
| Hawley's Condensed Chemical Dictionary | |
| HEAT TREAT FURNACES | |
| HELIUM, TECHNICAL | |
| Hobs | |
| Hydraulic Fluid Power - Assembled Systems - Method for Achieving Roll-Off Cleanliness; Appendix (NFPA T2.9.8-1979) | |
| Hydraulic fluid power - Calibration of liquid automatic particle-count instruments - Method using Air Cleaner Fine Test Dust contaminant | |
| Hydraulic Fluid Power - Connection for Tubes and Hoses - Dimensions and Designs for 37 Degree Flare and 24 Degree Flareless Fittings | |
| Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces (NFP T3.5.33M-1985) | |
| Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and 4-Bolt Flange Ports - Heavy Duty and Light Duty Cylinders (NFP T3.6.54M-1986) | |
| Hydraulic Fluid Power - Cylinders - Bore and Rod Area Ratios (Technically Identical to ISO 7181 - 1982) (Metric Only) | |
| Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances | |
| Hydraulic Fluid Power - Cylinders - Rod End Plain Eyes - Mounting Dimensions (Technically Identical to ISO 6981-1982) (Metric Only) | |
| Hydraulic Fluid Power - Cylinders - Rod End Spherical Eyes - Mounting Dimensions (Technically Identical to ISO 6982 - 1982) (Metric Only) | |
| Hydraulic Fluid Power - Filter Elements - Verification of Fabrication Integrity (Technically Identical to ISO 2942-1985) | |
| Hydraulic Fluid Power - Filters - Evaluation of Pressure Drop Versus Flow Characteristics | |
| Hydraulic Fluid Power - Filters - Statement of Requirements | |
| Hydraulic Fluid Power - Fluid Sample Containers - Qualifying and Controlling Cleaning Methods; Appendix (Technically Identical to ISO 3722-1976) (NFPA T2.9.2-1972) | |
| Hydraulic Fluid Power - Gas-Loaded Accumulators with Separators - Range of Pressures and Volumes, Characteristic Quantities and Identification (Metric Only) | |
| Hydraulic Fluid Power - Hose Assemblies - Method of Test (Metric Only) | |
| Hydraulic Fluid Power - Line Tubing - Seamless Low Carbon Steel | |
| Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends - Two- and Four-Hole Flanges and Shaft Ends - Metric... | |
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Determination of Steady- State Performance (Technically Identical to ISO 4409 - 1986) | |
| Hydraulic Fluid Power - Pumps - Test Code for the Determination of Airborne Noise Levels | |
| Hydraulic Fluid Power - Reciprocating Dynamic Sealing Devices in Linear Actuators - Method of Testing, Measuring and Reporting Leakage (NFPA T3.19.12M-1981) | |
| Hydraulic Fluid Power - Servovalves - Test Methods (Technically Identical to ISO 6404 - 1985) (Metric Only) | |
| Hydraulic Fluid Power - Solenoid Piloted Industrial Valves - Interface Dimensions for Electrical Connectors | |
| Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics (NFPA/T3.5.15M-1986) | |
| HYDRAULIC FLUID POWER - VALVES - MOUNTING INTERFACES | |
| HYDROGEN | |
| IDENTIFICATION SYSTEM FOR INDEXABLE INSERTS FOR CUTTING TOOLS | |
| INDEXABLE (THROW-AWAY) INSERT HOLDERS (R 1977) | |
| INDEXABLE INSERTS FOR CUTTING TOOLS; ERRATA - JUNE 1983 | |
| Inserted Blade Milling Cutter Bodies | |
| Interpretation of Limits and Tolerances | |
| Jig Bushings (Metric) | |
| Jig Bushings | |
| KNURLING | |
| Laboratory Procedure for Volatile Testing of Liquids that Comprise PVC Dispersions | |
| Leukocyte reduction filters | |
| Low Voltage Cartridge Fuses | |
| MAGNESIUM ALLOYS IN INGOT FORM FOR SAND CASTINGS, PERMANENT MOLD CASTINGS, AND DIE CASTINGS (METRIC), SPEC. FOR | |
| MAGNESIUM ALLOYS IN INGOT FORM FOR SAND CASTINGS, PERMANENT MOLD CASTINGS, AND DIE CASTINGS, SPEC. FOR (E1-1985) | |
| Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power Filter Element; Appendix | |
| Methods of Presenting Basic Performance Data for Fluidic Devices (NFPA T3.7.3) | |
| Milling Cutters and End Mills | |
| NITROGEN, TECHNICAL | |
| Oral Solid Dosage Forms | |
| OXYGEN, TECHNICAL, GAS AND LIQUID | |
| PAINT CIRCULATING SYSTEMS | |
| PAINT CURING AND MOISTURE DRYING OVENS | |
| PAINT SPRAY BOOTH BACK SECTION ACCEPTANCE TEST | |
| PAINT SPRAY BOOTHS - WATER WASH TUNNEL TYPE | |
| PAINT SPRAYING SYSTEMS ELECTROSTATIC - MANUAL AND AUTOMATIC | |
| PAINT SPRAYING SYSTEMS, SMALL PARTS, AUTOMATIC | |
| Pharma 4.0\x99 | |
| Pneumatic Fluid Power - Quick Action Couplings - Test Conditions and Procedures; Appendix (NFPA T3.20.3M R1) | |
| Pneumatic Fluid Power - Single Rod Cylinders with Detachable Mountings - 10 Bar (1 000 kPa) Series - Bores from 32 to 320 mm - Mounting Dimensions (Technically Identical to... | |
| Pneumatic Fluid Power - Single Rod Cylinders with Integral Mounting - 10 Bar (1 000 kPa) Series - Bores from 32 to 250 mm - Mounting Dimensions (Technically Identical to... | |
| Pneumatic Fluid Power - Systems Standard for Industrial Machinery | |
| Pneumatic Fluid Power - Use of Synthetic Lubricants - Guidelines (NFPA T1.9.2-1978) | |
| Polyvinyl-Chloride (PVC) Externally Coated Galvanized Rigid Steel Metal Conduit and Intermediate Metal Conduit | |
| PR\xfcFUNG DER TECHNISCHEN SAUBERKEIT - PARTIKELVERUNREINIGU NG FUNKTIONSRELEVANTER AUTOMOBILTEILE /2. \xfcBERARBEITETE AUSGABE | |
| Practice for the Use of Fire Resistant Fluids in Industrial Hydraulic Fluid Power Systems | |
| PRECISION HOLDERS FOR INDEXABLE INSERTS | |
| PRECISION INDEXABLE INSERT CARTRIDGES; ERRATA | |
| PROCEDURAL STANDARD FOR BUILDING ENCLOSURE TESTING | |
| Procedure for Determination of the Spatula Air Release Performance of a Plastisol | |
| Procedure for Measuring Tensile Properties of Flexible PVC Film and Sheet | |
| Procedure for Measuring the Fines of Grind or Degree of Dispersion of the Ingredients in a Plastisol or Other Liquid Dispersion Using a Fineness of Grind Gauge | |
| Procedure for Measuring the Gelation Temperature of Vinyl Plastisol Using a Thermal Gradient Plate | |
| Procedure for Measuring the Shore Hardness of a Fused Vinyl Sample by Means of a (Shore) Durometer | |
| Procedure for Measuring the Surface Gloss of Fused Vinyl Plastisol Film | |
| Procedure for Measuring the Viscosity of a Vinyl Dispersion at High Shear Rates by the Severs Extrusion Rheometer | |
| Procedure for Measuring the Viscosity of a Vinyl Dispersion at Low Shear Rates by the Brookfield Viscometer | |
| Procedure for Measuring the Weight per Gallon and Specific Gravity of a Vinyl Dispersion | |
| Procedure for the Preparation and Evaluation of a Mechanical Vinyl Foam from a Plastisol | |
| Procedure for the Preparation of a Vinyl Dispersion Using a High Shear Mixer | |
| Procedure for the Preparation of a Vinyl Dispersion Using a Low Shear Mixer | |
| Procedure for the Preparation of a Vinyl Film Cast from a Plastisol | |
| Procedure for the Preparation of a Vinyl Foam Cast from a Plastisol | |
| Product Package Label Specification | |
| Punch Guide Bushings - Variable, Press Fit | |
| Punches - Basic Ball-Lock Light and Heavy Duty (Metric) | |
| PUNCHES - BASIC BALL-LOCK LIGHT AND HEAVY DUTY (R 1981) | |
| Punches - Basic Head Type (Metric) | |
| Punches - Basic Head Type | |
| Punches - Basic, Angle Head Type and Related Quill Bushings | |
| Punches - Basic, Combination Angle Head Type and Related Quill Bushings | |
| Punches - Basic, Cylindrical Head Type and Related Quill Bushings | |
| Punches - Wire Type | |
| Punches-Variable, Angle Head Type and Related Quill Bushings | |
| Punches-Variable, Head Type (Metric) | |
| Punches-Variable, Head Type | |
| PVC Plastisol 101: An introductory course in the basics of flexible vinyl formulating | |
| RAINCOAT, MAN'S, LIGHTWEIGHT; COVER, CAP (RAIN), WITH DETACHABLE CAPE; AND JACKET, MAN'S (VISIBILITY) | |
| REAMERS (R 1988) | |
| Requirements for Presentation of Catalog Data, Fluid Compatibility, Cleaning Media, Markings and Dimensional Identification Codes, and Pressure Drop Characteristics for Fluid Power Air Line Filters (NFPA T3.12.2) | |
| RETAINERS - BASIC BALL- LOCK PUNCH AND DIE BUTTON LIGHT AND HEAVY DUTY | |
| Retainers - Basic Ball-Lock Punch and Die Button Light and Heavy Duty (Metric) | |
| Risk-Based Manufacture of Pharmaceutical Products | |
| Roller Turner Type Cutting Tools, Single Point | |
| Rotary Shaft Lip Type Seals - Nominal Dimensions and Tolerances (Metric Only) | |
| Shipping and Receiving Transaction Bar Code Label Specification | |
| Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances | |
| Spade Drill Blades and Spade Drill Holders | |
| SPECIFICATION FOR COPPER-SILICON ALLOY ROD, BAR, AND SHAPES | |
| Specification for Welded Aluminum-Alloy Field-Erected Storage Tanks | |
| SPECIFICATIONS FOR BAND SAW BLADES (METAL CUTTING) (REVISION OF ANSI B94.51-1976) | |
| SPECIFICATIONS FOR CARBIDE BLANKS FOR TWIST DRILLS, REAMERS, END MILLS, AND RANDOM ROD (R 1982) | |
| SPECIFICATIONS FOR HACKSAW BLADES (REVISION OF ANSI B94.52-1977) | |
| SPECIFICATIONS FOR HOLE SAWS, HOLE SAW ARBORS, AND HOLE SAW ACCESSORIES | |
| Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys | |
| Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings | |
| STANDARD GUIDE FOR SPECIFICATION AND QUALITY ASSURANCE FOR THE ELECTRICAL CONTACT PERFORMANCE OF CRIMPED WIRE TERMINATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations | |
| Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials | |
| Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials | |
| STANDARD PRACTICE FOR ALUMINUM ALLOY EXTRUSIONS PRESS COOLED FROM AN ELEVATED TEMPERATURE SHAPING PROCESS FOR PRODUCTION OF T1, T2, T5 AND T10-TYPE TEMPERS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers | |
| Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10\x96Type Tempers | |
| Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought | |
| STANDARD PRACTICE FOR HOT ROLLING MILL SOLUTION HEAT TREATMENT FOR ALUMINUM ALLOY PLATE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate | |
| Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis | |
| STANDARD PRACTICE FOR SAMPLING MAGNESIUM AND MAGNESIUM ALLOYS FOR SPECTROCHEMICAL ANALYSIS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis | |
| Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces | |
| STANDARD SPECIFICATION FOR ALUMINUM-ALLOY CASTINGS PRODUCED BY SQUEEZE CASTING, AND THE SEMI-SOLID THIXOCAST AND RHEOCAST CASTING PROCESSES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes | |
| Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes | |
| Standard Specification for Aluminum-Alloy Centrifugal Castings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Aluminum-Alloy Centrifugal Castings | |
| Standard Specification for Brass Rod, Bar, and Shapes | |
| Standard Specification for Bronze Trolley Wire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Bronze Trolley Wire | |
| Standard Specification for Carbon Fiber Composite Core (CFCC/TS) for use in Overhead Electrical Conductors | |
| Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors | |
| STANDARD SPECIFICATION FOR CONCENTRIC-LAY-STRAN DED ALUMINUM CONDUCTORS, ALUMINUM MATRIX COMPOSITE REINFORCED (ACAMCR), FORMERLY ACCR - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Concentric-Lay-Stran ded Aluminum Conductors, Aluminum Matrix Composite Reinforced (ACAMCR), Formerly ACCR | |
| Standard Specification for Concentric-Lay-Stran ded Aluminum Conductors, Composite Reinforced (ACCR) | |
| Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM SEAMLESS TUBE (UNS NOS. C17500 AND C17510) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) | |
| STANDARD SPECIFICATION FOR COPPER-BERYLLIUM WELDED HEAT EXCHANGER AND CONDENSER TUBE (UNS NO. C17510) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) | |
| Standard Specification for Copper-Chrome-Iron-T itanium Alloy Plate, Sheet, Strip and Rolled Bar | |
| STANDARD SPECIFICATION FOR COPPER-CHROMIUM-IRON -TITANIUM ALLOY PLATE, SHEET, STRIP AND ROLLED BAR - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Chromium-Iron -Titanium Alloy Plate, Sheet, Strip and Rolled Bar | |
| STANDARD SPECIFICATION FOR COPPER-NICKEL-TIN SPINODAL ALLOY ROD AND BAR - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR FOR GENERAL PURPOSES (METRIC) | |
| Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels (Metric) | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR FOR GENERAL PURPOSES AND PRESSURE VESSELS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY PLATE, SHEET, STRIP, AND ROLLED BAR FOR GENERAL PURPOSES AND PRESSURE VESSELS | |
| Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY ROD, BAR AND SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY ROD, BAR, AND SHAPES (METRIC) | |
| Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Silicon Alloy Wire for General Applications | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL PURPOSES (METRIC) (R 1992) | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL PURPOSES (METRIC) | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL PURPOSES (R 1985) (E1-1984) | |
| STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL PURPOSES | |
| STANDARD SPECIFICATION FOR COPPER-ZINC-TIN-BISM UTH ALLOY ROD, BAR AND WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Zinc-Tin-Bism uth Alloy Rod, Bar and Wire | |
| Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use | |
| Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc\x965% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc\x965% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors | |
| Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors | |
| Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FIBER REINFORCED ALUMINUM MATRIX COMPOSITE (AMC) CORE WIRE FOR ALUMINUM CONDUCTORS ALUMINUM MATRIX COMPOSITE REINFORCED (ACAMCR) (FORMERLY KNOWN AS ACCR) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors Aluminum Matrix Composite Reinforced (ACAMCR) (formerly known as ACCR) | |
| Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR) | |
| STANDARD SPECIFICATION FOR FREE-CUTTING BISMUTH BRASS ROD, BAR AND WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR ZINC AND ZINC ALLOY PRODUCTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for General Requirements for Zinc and Zinc Alloy Products | |
| Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes | |
| STANDARD SPECIFICATION FOR HIGH FLUIDITY (HF) ZINC-ALUMINUM ALLOY IN INGOT FORM FOR THIN WALL DIE CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings | |
| STANDARD SPECIFICATION FOR HIGH MAGNESIUM ALUMINUM-ALLOY PRODUCTS FOR MARINE SERVICE AND SIMILAR ENVIRONMENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments | |
| Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service | |
| Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability | |
| Standard Specification for Low Leaded Brass Rod, Bar and Shapes | |
| Standard Specification for Low-Carbon Nickel-Chromium-Moly bdenum-Gadolinium Alloy Plate, Sheet, and Strip | |
| STANDARD SPECIFICATION FOR LOW-LEADED BRASS ROD, BAR, WIRE, AND SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes | |
| STANDARD SPECIFICATION FOR MAGNESIUM ALLOYS IN INGOT FORM FOR SAND CASTINGS, PERMANENT MOLD CASTINGS, AND DIE CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MAGNESIUM ALLOYS IN INGOT FORM FOR SAND CASTINGS, PERMANENT MOLD CASTINGS, AND DIE CASTINGS | |
| STANDARD SPECIFICATION FOR MAGNESIUM INGOT AND STICK FOR REMELTING (METRIC) (R 1988) | |
| Standard Specification for Magnesium Ingot and Stick for Remelting | |
| Standard Specification for Magnesium-Alloy Die Castings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY DIE CASTINGS | |
| Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application | |
| STANDARD SPECIFICATION FOR NICKEL-COBALT ALLOY COATING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Nickel-Cobalt Alloy Coating | |
| Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors | |
| STANDARD SPECIFICATION FOR POWDER METALLURGY (PM) TITANIUM AND TITANIUM ALLOY STRUCTURAL COMPONENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components | |
| STANDARD SPECIFICATION FOR PRECIPITATION HARDENED OR COLD WORKED, SEAMLESS NICKEL ALLOY PIPE AND TUBE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube | |
| STANDARD SPECIFICATION FOR PRIME WESTERN GRADE-RECYCLED (PWG-R) ZINC - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc | |
| STANDARD SPECIFICATION FOR SAMPLING AND SAMPLE PREPARATION OF LEAD AND LEAD ALLOYS FOR OPTICAL EMISSION SPECTROMETRIC OR ICP ANALYSIS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis | |
| STANDARD SPECIFICATION FOR SILVER COATED COPPER AND COPPER ALLOY STRANDED CONDUCTORS FOR ELECTRONIC SPACE APPLICATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application | |
| Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application | |
| Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application | |
| Standard Specification for Titanium and Titanium Alloy Ingots - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Titanium and Titanium Alloy Ingots | |
| Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate | |
| Standard Specification for Titanium and Titanium Ingots | |
| Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting | |
| Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins | |
| Standard Specification for Zinc Alloys in Ingot Form for Spin Casting - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc Alloys in Ingot Form for Spin Casting | |
| STANDARD SPECIFICATION FOR ZINC AND TIN ALLOY WIRE USED IN THERMAL SPRAYING FOR ELECTRONIC APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications | |
| STANDARD SPECIFICATION FOR ZINC-ALUMINUM ALLOYS IN INGOT FORM FOR HOT-DIP COATINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings | |
| STANDARD TEST METHOD FOR ANALYSIS OF MAGNESIUM AND MAGNESIUM ALLOYS BY ATOMIC EMISSION SPECTROMETRY - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry | |
| STANDARD TEST METHOD FOR CHLORIDE RESISTANCE TEST FOR CHROMIUM ELECTROPLATED PARTS (RUSSIAN MUD TEST) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test) | |
| Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts | |
| Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application | |
| Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements | |
| Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M)Parts Using Microindentation Hardness Measurements | |
| Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements | |
| STANDARD TEST METHOD FOR FLATTENING OF COPPER AND COPPER-ALLOY PIPE AND TUBE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube | |
| Standard Test Method for Linear Expansion of Metals | |
| STANDARD TEST METHOD FOR MEASUREMENT OF INTERNAL STRESS OF METALLIC COATINGS BY SPLIT STRIP EVALUATION (DEPOSIT STRESS ANALYZER METHOD) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method) | |
| Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts | |
| STANDARD TEST METHOD FOR METALLOGRAPHICALLY ESTIMATING THE OBSERVED CASE DEPTH OF FERROUS POWDER METALLURGY (PM) PARTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts | |
| Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials | |
| Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials | |
| Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas | |
| Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials | |
| Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials | |
| Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) | |
| Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products | |
| Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products | |
| STANDARD TEST METHODS FOR DENSITY OF COMPACTED OR SINTERED POWDER METALLURGY (PM) PRODUCTS USING ARCHIMEDES' PRINCIPLE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes\x92 Principle | |
| Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel | |
| Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes\x92 Principle | |
| Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes\x92 Principle - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHODS FOR SURFACE ROUGHNESS OF POWDER METALLURGY (PM) PRODUCTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Tolerances for Linear Dimensions, Inch and Metric | |
| Static Pressure Rating Methods of Square Head Fluid Power Cylinders (NFPA T3.6.5) | |
| Steel Rotary Slitting Knives and Steel Spacing Collars | |
| Sterile Manufacturing Facilities | |
| Straight Cut-Off Blades for Lathes and Screw Machines | |
| SULFUR HEXAFLUORIDE, TECHNICAL GRADE | |
| Surface Texture (Roughness, Waviness, and Lay) | |
| SWEAT PANTS | |
| SWEAT SHIRT | |
| Symbols for Marking Electrical Leads and Ports on Fluid Power Valves | |
| TAPS - CUT AND GROUND THREADS | |
| The American Industrial Hygiene Association: Its History and Personalities, 1939-1990 | |
| Tolerances and Standard Fits for Mating Parts, Metric Sizes | |
| Tool Life Testing with Single-Point Turning Tools | |
| TROUSERS, FOOD HANDLERS | |
| TWIST DRILLS STRAIGHT SHANK AND TAPER SHANK COMBINED DRILLS AND COUNTERSINKS (REVISION OF B94.11-1967) (R 1987) | |
| UNIFORM, MAN'S, (GUARDS AND POLICE) | |
| Vacuum Rise Air Release Test through Vacuumat | |
| Vacuum Rise Air Release Test | |
| Vinyl Formulators (Products) Division 15th Annual Compounding Conference Proceedings | |
| Vinyl Formulators (Products) Division 2006: 17th Annual Compounding Conference Proceedings | |
| Water and Steam Systems |
| << Prev | Next >> |