Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
237
238
239
240
241
242
243
244
245
246
247
248
249
250
260
270
280
290
300
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) ADAPTER ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARED TUBE END, 3000 PSI | |
| (R) Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification | |
| (R) Cable, Thermocouple Extension, Shielded and Unshielded | |
| (R) Cargo Restraint Straps - Design Criteria and Testing Methods | |
| (R) Contact, Wire Barrel, Crimp Type | |
| (R) Coupling, Fuel Line, Flexible, 125 psi General Specification for | |
| (R) COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 \xb0F) | |
| (R) COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 \xb0F) | |
| (R) COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 6.25 FLANGE OD (-65 TO 250 \xb0F) | |
| (R) Couplings, Clamp, Grooved, V-Band | |
| (R) CRIMPING TOOL AND ACCESSORIES, DIES, WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS | |
| (R) Crimping Tool and Accessories, Electrical, Crimp Barrel Size 8 to 4/0, General Purpose Use | |
| (R) CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 00 UN-INSULATED AND INSULATED CRIMP BARRELS | |
| (R) CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, LIGHTWEIGHT, DIE TYPE, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS | |
| (R) CRIMPING TOOL AND ACCESSORIES, HYDRAULIC PUMPS, 10000 PSI MINIMUM | |
| (R) CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES | |
| (R) CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS | |
| (R) CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 0000 FOR INSULATED AND UN-INSULATED CRIMP BARRELS | |
| (R) Design and Performance Criteria Aircraft Crash Axes | |
| (R) FITTING ASSEMBLY, CAP, FLARELESS | |
| (R) FITTING, UNION AND REDUCER, FLARELESS | |
| (R) FITTING, UNION, TUBE, .375 BULKHEAD | |
| (R) Fuse, Current Limiter Type, Aircraft | |
| (R) Helicopter Health and Usage Monitoring System Accelerometer Interface Specification | |
| (R) Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification | |
| (R) HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45\xb0 TO 45 | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45\xb0 TO 90\xb0 | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90\xb0 TO 90\xb0 | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45\xb0 | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90\xb0 | |
| (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO STRAIGHT | |
| (R) Hydraulic Systems, Military Aircraft, Design and Installation, Requirements For | |
| (R) Insulating Component, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For | |
| (R) Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification | |
| (R) Minimum Operational Performance Specification for Inflight Icing Detection Systems | |
| (R) Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft | |
| (R) SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: ARINC653 Annex, Annex C: Code Generation Annex, Annex E: Error Model Annex | |
| (R) Standard Requirements for Aerospace Sealants and Adhesion Promoters | |
| 300 G.P.H. Fuel Filter Assembly | |
| Absorbent Pads - Accumulator Trough, 40 A.H. | |
| Absorbent Pads - Bottom Accumulator Trough, 15AH & 25 AH | |
| Absorbent Pads - Bottom Accumulator Trough, 15AH & 25AH | |
| Absorbent Pads - Bottom Accumulator Trough, 40AH Edition 2 | |
| Absorbent Pads - Bottom Accumulator Trough, 40AH | |
| Absorbent Pads for Accumulator Trough, 15AH & 25AH | |
| Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination | |
| Accessories for seat belts used in motor vehicles | |
| Accumulator Trough 12V 25AH | |
| Accumulator Trough 12V 40AH | |
| Accumulator Trough, 12V 15AH | |
| Acoustic performance of windows and doors - Methods of test | |
| Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane | |
| Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields, Part 1: Comparison... | |
| Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment | |
| Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms | |
| Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane | |
| Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards | |
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields, Part 2: Methods for special reverberation test... | |
| Adapter - 10.000 Bolt Circle to 6.500 Pilot Diameter - QAD | |
| Adapter - 8.000 Bolt Circle to 4.125 Pilot Diameter - QAD | |
| ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO SPHERICAL FLARED TUBE END, 3000 psi | |
| ADAPTER-10.000 BOLT CIRCLE TO 4.125 PILOT DIAMETER | |
| Adaptor, Straight, Tube (Steel) | |
| Adaptor, Straight, Tube (Titanium) | |
| Advocacy in Ageing and Disability | |
| Aerospace - General Requirements for Hydraulic Fuse - Quantity Measuring | |
| Aerospace Cable, Fiber Optic | |
| Aerospace Standard for Hand-Held Wire Stripper Tools | |
| AMENDMENT RECORD for Drawing Standard No. AS55000-099 | |
| Architecture Analysis & Design Language (AADL) Annex F: AADL Annex for the FACETM Technical Standard Edition 3.0 | |
| ARCHITECTURE ANALYSIS & DESIGN LANGUAGE (AADL) | |
| Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex | |
| Assembly of Accumulator Trough, 12V 15 AH | |
| Assembly of Accumulator Trough, 12V 25 AH | |
| Assembly of Accumulator Trough, 12V 40 AH | |
| Australian Aquatic Plant Names Standard | |
| Australian Fish Names Standard | |
| Australian Health Contact Centres | |
| Balance Weights, Washer Type, to suit Metric Fasteners | |
| Battery powered electric machines for use in underground mines | |
| Bolt, Close Tolerance - Double Hexagon Extended Washer Head INCO 718, 0.4375-20 UNJF-3A MOD BS4084 Edition 2 03/01/1989 | |
| BOLT, CLOSE TOLERANCE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, INCONEL 718, 0.1900 \x96 32UNJF \x96 3A.MOD ISO3161 | |
| BOLT, CLOSE TOLERANCE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, INCONEL 718, 0.2500 \x96 28UNJF \x96 3A.MOD ISO3161 | |
| BOLT, CLOSE TOLERANCE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, INCONEL 718, 0.3125 \x96 24UNJF \x96 3A.MOD ISO3161 | |
| BOLT, CLOSE TOLERANCE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, INCONEL 718, 0.3750 \x96 24UNJF \x96 3A MOD ISO3161 | |
| BOLT, CLOSE TOLERANCE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, INCONEL 718, 0.5000 \x96 20UNJF \x96 3A.MOD ISO3161 | |
| BOLT, HEXAGON, SELF RETAINING, IMPEDANCE TYPE, INCONEL 718, INCH SERIES | |
| Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification | |
| Boundary Ring for Plastic Trough, 25 A.H. | |
| Boundary Ring for Plastic Trough, 40 A.H. | |
| Bushfire water spray systems | |
| Button/coin batteries and consumer goods that use button/coin batteries - Safety for consumers | |
| CABLE, FIBER OPTIC, MULTI-MODE, 200/230/500 \xb5m, STEP INDEX, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTI-MODE, 200/230/500 micro m, STEP INDEX, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTI-MODE, 50/125/450 \xb5m, GRADED INDEX, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTI-MODE, 50/125/450 micro m, GRADED INDEX, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 \xb5m GRADED INDEX, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 \xb5m GRADED INDEX, NONHERMETIC, LOOSE TUBE | |
| CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 micro m GRADED INDEX, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 micro m GRADED INDEX, NONHERMETIC, LOOSE TUBE | |
| CABLE, FIBER OPTIC, SINGLE-MODE, 4.6/125/450 \xb5m, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, SINGLE-MODE, 4.6/125/450 micro m, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, SINGLE-MODE, 4.6/125/450 um, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, SINGLE-MODE, 6/125/250 \xb5m, HERMETIC COATED, TIGHT BUFFER | |
| CABLE, FIBER OPTIC, SINGLE-MODE, 6/125/250 micro m, HERMETIC COATED, TIGHT BUFFER | |
| Calculation of Electron Vacancy Number in Superalloys | |
| Cargo Restraint Straps - Design Criteria and Testing Methods | |
| Children's Safety in the Metaverse | |
| Clamp Type Joints (Typical Assembly) | |
| Classification of Subsurface Utility Information (SUI) | |
| Classification of subsurface utility information, Part 1: Subsurface utility information | |
| Classification of subsurface utility information, Part 2: Subsurface utility engineering | |
| Climate change adaptation for settlements and infrastructure - A risk based approach | |
| Contact, Wire Barrel, Crimp Type | |
| Coupling - Forged Retainer - QAD | |
| Coupling - Sheet Metal Retainer - QAD | |
| Coupling Flange, Grooved | |
| Coupling Flange, Plain | |
| Coupling, Fuel Line, Flexible, 125 psi General Specification for | |
| Coupling-Forged Retainer- QAD | |
| Coupling-Sheet Metal Retainer-QAD | |
| COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 \xb0F) | |
| Couplings, Clamp, Grooved, V-Band, 1.75 to 14.25 Flange OD (-65 to 1200 Degrees F) | |
| COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 800 \xb0F) | |
| Couplings, Clamp, Grooved, V-Band, 1.75 to 14.25 Flange OD (-65 to 800 Degrees F) | |
| COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 6.25 FLANGE OD (-65 TO 250 \xb0F) | |
| Couplings, Clamp, Grooved, V-Band, 1.75 to 6.25 Flange OD (-65 to 250 Degrees F) | |
| Couplings, Clamp, Grooved, V-Band | |
| Cranes - Access guards and restraints, Part 1: General (ISO 11660-1:2008, MOD) | |
| Cranes - Anchoring devices for in-service and out-of-service conditions, Part 1: General (ISO 12210-1:1998, MOD) | |
| Cranes - Cabins and control stations, Part 1: General (ISO 8566-1:2010, MOD) | |
| Cranes - Classification, Part 1: General (ISO 4301-1:2016, MOD) | |
| Cranes - Control layout and characteristics, Part 1: General principles (ISO 7752-1:2010, MOD) | |
| Cranes - Design calculation for rail wheels and associated trolley track supporting structure, Part 1: General (ISO 16881-1:2005, MOD) | |
| Cranes - Design principles for loads and load combinations, Part 1: General (ISO 8686-1:2012, MOD) | |
| Cranes - Graphic symbols, Part 1: General | |
| Cranes - Information labels, Part 1: General (ISO 9942-1:2015, MOD) | |
| Cranes - Limiting and indicating devices, Part 1: General (ISO 10245-1:2008, MOD) | |
| Cranes - Proof of competence of steel structures (ISO 20332:2016, MOD) | |
| Cranes - Requirements for mechanisms, Part 1: General (ISO 10972-1:1998, MOD) | |
| Cranes - Tolerances for wheels and travel and traversing tracks, Part 1: General | |
| Cranes - Wind load assessment (ISO 4302:2016, MOD) | |
| Cranes \x97 Access, guards and restraints Part 3: Bridge and gantry cranes | |
| Cranes \x97 Anchoring devices for in-service and out-of-service conditions | |
| Cranes \x97 Cabins and control stations Part 3: Overhead travelling and portal bridge cranes | |
| Cranes \x97 Control layout and characteristics Part 3: Bridge and gantry cranes | |
| Cranes \x97 Design principles for loads and load combinations Part 3: Overhead travelling and portal bridge cranes | |
| Cranes \x97 Information to be provided Part 3: Overhead travelling cranes and portal bridge cranes | |
| Cranes \x97 Limiting and indicating devices Part 3: Overhead travelling and portal bridge cranes | |
| Cranes \x97 Requirements for mechanisms Part 3: Bridge and gantry cranes | |
| Cranes \x97 Stiffness \x97 Bridge and gantry cranes | |
| Cranes other than mobile and floating cranes - General requirements for stability (ISO 4304:1987, MOD) | |
| CRIMPING TOOL AND ACCESSORIES, 18VDC BATTERY ELECTRIC, PORTABLE HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED, AND SIZE 8 THROUGH 2 INSULATED CRIMP BARRELS | |
| CRIMPING TOOL AND ACCESSORIES, DIES, WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS | |
| CRIMPING TOOL AND ACCESSORIES, ELECTRICAL, SIZE 8 TO 0000, GENERAL USE DIE TYPE | |
| Crimping Tool and Accessories, Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless | |
| CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 0000 | |
| CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, LIGHTWEIGHT, DIE TYPE, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS | |
| CRIMPING TOOL AND ACCESSORIES, HYDRAULIC PUMPS, 10 000 PSI MINIMUM | |
| CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES | |
| CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 00 UN-INSULATED AND 8 THRU 2 INSULATED CRIMP BARRELS | |
| Density tracer testing for measuring performance of coal density separators | |
| Design and Performance Criteria Aircraft Crash Axes | |
| Design of post-installed and cast-in fastenings in concrete | |
| Drive - 3/4 Generator - 10" BC - Male Pilot | |
| Drive - 3/4 Generator - 8" BC - Male Pilot | |
| Drive - 3/4 Generator 10" BC - Male Pilot | |
| Drive Accessory 6.500 Pilot Diameter - QAD | |
| DRIVE ACCESSORY 9.000 PILOT DIAMETER - QAD | |
| Drive-3/4 Generator - 8" BC - Male Pilot | |
| DRIVE-3/4 GENERATOR-10"BC-FEMA LE PILOT | |
| Drying cabinets for reusable medical devices | |
| Earth-moving machinery - Access systems (ISO 2867:2011, MOD) | |
| Earth-moving machinery - Wheeled machines - Steering requirements | |
| Electromechanical Power Controller/Relay, General Specification For | |
| Energy storage system performance | |
| Examination of ignitable liquids in fire debris | |
| Exfoliation Testing of Aluminum | |
| Exterior insulation and finish cladding systems | |
| Ferrule, Welding, Pipe Fitting (Steel) | |
| Ferrule, Welding, Pipe, Fitting (Titanium) | |
| Fibre-reinforced polymer bars | |
| Filler Sealing Ring | |
| Filter Head (called for on AS4725) | |
| Filter Pack Assembly (called for on AS4725) | |
| Filter Pack Assembly (for 300 G.P.H. Fuel Filter) | |
| FITTING ASSEMBLY, ADAPTER \x96 RING LOCKED PORT CONNECTION TO FLARED TUBE END, 3000 PSI | |
| FITTING ASSEMBLY, CAP, FLARELESS | |
| Fitting End, Bulkhead, Spherical, 37 Degree Flared Tube Connection Design Standard | |
| FITTING END, BULKHEAD, SPHERICAL, 37\xb0 FLARED TUBE CONNECTION DESIGN STANDARD | |
| Fitting End, Spherical, 37 Degree Flared Tube Connection Design Standard | |
| FITTING END, SPHERICAL, 37\xb0 FLARED TUBE CONNECTION DESIGN STANDARD | |
| FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD | |
| FITTING, ADAPTER, BULKHEAD, FLARELESS TO FLARED | |
| FITTING, ADAPTER, FLARELESS TO FLARED | |
| FITTING, ADAPTER, REDUCER, PORT TO FLARELESS | |
| Fitting, Adapter, Straight, Flared, External Swage, Hydraulic | |
| Fitting, Adapter, Straight, Flareless, External Swage, Hydraulic | |
| Fitting, Elbow, 45 Degree, Bulkhead, Flareless to Flared | |
| FITTING, ELBOW, 45 DEGREES, BULKHEAD, FLARELESS TO FLARED | |
| FITTING, ELBOW, 45\xb0, BULKHEAD, FLARELESS TO FLARED | |
| Fitting, Elbow, 90 Degree, Bulkhead, Flared to Flareless | |
| Fitting, Elbow, 90 Degree, Bulkhead, Flareless to Flared | |
| FITTING, ELBOW, 90 DEGREES, BULKHEAD, FLARED TO FLARELESS | |
| FITTING, ELBOW, 90 DEGREES, BULKHEAD, FLARELESS TO FLARED | |
| FITTING, ELBOW, 90\xb0, BULKHEAD, FLARED TO FLARELESS | |
| FITTING, ELBOW, 90\xb0, BULKHEAD, FLARELESS TO FLARED | |
| FITTING, PLUG, TUBE END, FLARELESS | |
| FITTING, SLEEVE, COUPLING, FLARELESS | |
| FITTING, UNION AND REDUCER, FLARELESS | |
| FITTING, UNION, TUBE, .375 BULKHEAD | |
| Flange - 3/4 Generator 8" BC - Female Pilot | |
| Flange Accessory 3.000 Pilot Diameter - QAD | |
| Flange Accessory 3.000 Pilot Diameter-QAD | |
| Flange Accessory 4.125 Pilot Diameter - QAD | |
| Flange Accessory 4.125 Pilot Diameter-QAD | |
| Flange Accessory 6.500 Pilot Diameter - QAD | |
| Flange Accessory 6.500 Pilot Diameter-QAD | |
| FLANGE ACCESSORY 9.000 PILOT DIAMETER - QAD | |
| FLANGE, STRAIGHT THREAD PORT, WELD | |
| Flanged Plug | |
| Forensic analysis, Part 1: Recognition, recording, recovery, transport and storage of material | |
| Forensic analysis, Part 2: Analysis and examination of material | |
| Forensic analysis, Part 3: Interpretation | |
| Forensic analysis, Part 4: Reporting | |
| Forging for Control Column Housing | |
| Fuse Holder, Block Type, Aircraft | |
| FUSE, LIMITER TYPE ENCLOSED LINK, 1 - 60 AMPERE | |
| Gas appliances - General requirements | |
| Gender-inclusive job evaluation and grading | |
| General Requirements for Hydraulic Fuse - Flow Rate | |
| Guidelines for applying human resource metrics | |
| Health and Usage Monitoring System Accelerometer Interface Specification | |
| Health and Usage Monitoring System Advanced Multipoint Interface Specification | |
| Health and Usage Monitoring System Data Interchange Specification | |
| Health and Usage Monitoring System, Blade Tracker Interface Specification | |
| Health and Usage Monitoring System, Rotational System Indexing Sensor Specification | |
| Hose Assembly, Heated, 125 psig, Lined Silicone Potable Water, Procurement Specification (Supplement 1) | |
|
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification -- AS5420C
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification -- AS5420D
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification -- AS5420E
|
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER | |
| HOSE ASSEMBLY, LINED SILICONE, HEATED, FIXED CAVITY, 125 PSI, POTABLE WATER | |
| HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER | |
| HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS, 125 PSI, POTABLE WATER | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 45 DEGREE | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 90 DEGREE | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90 DEGREE TO 90 DEGREE | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45 DEGREE | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90 DEGREE | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO STRAIGHT | |
| Hydraulic Systems, Aircraft, Design and Installation Requirements for | |
| Hydraulic Systems, Military Aircraft, Design and Installation, Requirements For | |
| Hygienic production of spray dried blood products | |
| Information technology \x97 Artificial intelligence \x97 AI system life cycle processes | |
| Information technology \x97 Artificial intelligence \x97 Guidance for AI applications | |
| Information technology \x97 Artificial intelligence \x97 Reference architecture of knowledge engineering | |
| Information technology \x97 Computer graphics, image processing and environmental data representation \x97 Information model for mixed and augmented reality content \x97 Core objects and attributes | |
| Insert - Inch, Thinwall - Long, Screw Locking (INCO 718) | |
| Insert - Inch, Thinwall - Short, Screw Locking (INCO 718) | |
| Insert - Metric, Thinwall - Long, Screw Locking (INCO 718) | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification for | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Strain Relief and Sealing, Y | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3 | |
| Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T | |
| Iron ores \x97 Determination of Transportable Moisture Limit \x97 Modified Proctor-Fagerberg method for iron ore fines | |
| Lever Forging - Pilots Seat-Raising Gear | |
| Livestock loading/unloading ramps and forcing pens | |
| Loose Collar | |
| LP Gas mobile industrial direct fired air heaters | |
| Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification | |
| Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification | |
| Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting; Procurement Specification | |
| Main Bearing Bracket Forging - Pilots Seat-Raising Gear | |
| Management of electrical and electronic equipment for re-use or recycling | |
| Mechanical Splice for Aerospace Fiber Optic Cables | |
| Mechanical Splice, Fiber Optic, Crimp and Cleave, for Aerospace Simplex Cable | |
| Methods of testing infant sleep surfaces Method 1: Test for firmness and flatness | |
| Methods of testing infant sleep surfaces Method 2: Test for firmness of objects that cannot be tested to AS 5407.1 | |
| Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes | |
| Minimum Operational Performance Specification for Inflight Icing Detection Systems | |
| Mobile elevating work platforms \x97 Operator\x92s controls \x97 Actuation, displacement, location and method of operation | |
| Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems | |
| Natural bromoform feed additives product quality \x97 Products derived from Asparagopsis | |
| Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft | |
| NUT, COUPLING FLARELESS | |
| NUT, COUPLING, FLARELESS | |
| NUT, FITTING, ENGINE, FLARED | |
| NUT, FLARED, LONG | |
| Nut, Reduced Hexagon, S/Locking, Deep Counterbored, Metric Series | |
| Nut, Reduced Hexagon, Self-Locking, Deep Counterbored, Inch Series for uses up to 425\xbaC - for use with Impedance Type Bolts | |
| NUT, SELF LOCKING, EXTENDED WASHER, DOUBLE HEXAGON \x96 FOR USE WITH IMPEDANCE TYPE BOLTS CORROSION RESISTANT STEEL TO BS HR650 OR AMS5737 CLASSIFICATION 1100 MPA (160,000 LBF/IN2) TENSILE AT ROOM... | |
| Nut, Self Locking, Shank, Flange Restrained, 0.1900-32 UNJF- 3B BS4084, based on AS44750 with 1g, 2g, 3g, & 6g of additional mass | |
| NUT, SELF LOCKING, SHANK, FLANGE RESTRAINED, 0.2500-28UNJF-3B ISO3161. BASED ON AS44751 WITH 2g, 5g, 12g AND 18g OF ADDITIONAL MASS. | |
| Nut, Self Locking, Shank, Flange Restrained, 0.3125-24 UNJF- 3B BS4084, based on AS44752 with 2g, 5g, & 14g of additional mass | |
| Nut, Self Locking, Shank, Flange Restrained, 0.3750-24 UNJF- 3B BS4084, based on AS44753 with 3g, 5g, & 15g of additional mass | |
| Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 \xb0F, UNJ Thread - Procurement Specification | |
| Nut, Union, Friction Locked (Steel) | |
| Nut, Union, Friction Locked (Titanium) | |
| Olive oils and olive-pomace oils | |
| Operating Sleeve L.H. | |
| Operating Sleeve R.H. | |
| Pallet Lift Truck and Container Fork Pocket Interface | |
| Passive grease arrestors | |
| Performance Standard for Child Restraint Systems in Transport Category Airplanes | |
| Pivet Bolt | |
| Pool covers | |
| PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD | |
| POWER TAKE-OFF, MOUNTING PAD & DRIVE, TYPE I & II | |
| Privately contracted security and detection dogs, Part 1: Acquisition, welfare, training, deployment and retirement | |
| Privately contracted security and detection dogs, Part 2: Training and certification of dogs and handlers | |
| Protection of openable windows/fall prevention - Test sequence and compliance method | |
| Quadrant Forging - Pilots Seat-Raising Gear | |
| Quadrant Lever Forging - Pilots Seat-Raising Gear | |
| Quantum technology \x97 Reference guide to quantum computing | |
| Records and information management \x97 Migration of authoritative data, information and records between systems | |
| Reference Standards Notched Shims for Magnetic Particle Inspection | |
| Regional Aircraft Towbar Attach Fitting Interface | |
| Reprocessing of reusable medical devices and other devices in health and non-health related facilities | |
| Requirements for Accreditation of Testing Laboratories for Organic Coatings | |
| Requirements for receivers for VHF/UHF DVB-T2 television broadcasts including ancillary services | |
| Retaining Strap - Accumulator Trough | |
| Ring, Welding (Metric and Inch) | |
| Rod for Filter Pack (called for on AS5421) | |
| Rubber Pad, Control Stops | |
| SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: Graphical AADL Notation, Annex C: AADL Meta-Model and Interchange Formats, Annex D: Language Compliance and Application Program Interface... | |
| SAE Architecture Analysis and Design Language (AADL) Annex Volume 2: Annex B: Data Modeling Annex Annex D: Behavior Model Annex Annex F: ARINC653 Annex | |
| Safety of machinery - Electrical equipment of machines, Part 32: Requirements for hoisting machines (IEC 60204-32:2008 (ED.2.0) MOD) | |
| Sampling and qualitative identification of asbestos in bulk materials | |
| Seal for Push Button | |
| Smart Energy Profile Application Protocol | |
| Solar heating and cooling systems - Calculation of energy consumption | |
| Space heating and cooling and ventilation systems - Calculation of energy and comfort performance | |
| Spacer, Welding (Metric and Inch) | |
| Spacer | |
| Spider | |
| Spring (for Stop) | |
| Squalene and shark liver oil | |
| Standard Requirements for Aerospace Sealants and Adhesion Promoters | |
| Standard Requirements for Aerospace Sealants | |
| Standard Specification for Turbine Flowmeters | |
| Stirrup - Filter Bowl (called for on AS5431) | |
| Stirrup Assembly (called for on AS4725) | |
| Stirrup Screw (called for on AS5431) | |
| Stop (called for on AS2840-99) | |
| Stop Bolt (called for on AS5378) | |
| Stop Pin | |
| Stop Plate | |
| Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly | |
| Stud for Accumulator Trough | |
| Support Clips - Rubber Covered | |
| Swimming pool heat pump systems | |
| TACHOMETER DRIVE \x96 TYPE I | |
| Tachometer Drive-Type I | |
| Tool Steel Ring for Magnetic Particle Inspection | |
| Top Link Forging - Pilots Seat-Raising Gear | |
| Tow trucks - Tilt, slide and underlift vehicles | |
| Valves, Safety, Cabin Air, General Specification For | |
| Washer - Front Spigot - Control Column | |
| WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREES C | |
| WIRE, THERMOCOUPLE, CROSSLINKED POLYALKENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 \xb0C | |
| WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 \xb0C | |
| WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREES C | |
| WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES C | |
| WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, 260 \xb0C | |
| WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C | |
| WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/ CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 \xb0C | |
| WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 \xb0C | |
| WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREES C | |
| WIRE, THERMOCOUPLE, FP/POLYMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 DEGREES C | |
| WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 \xb0C | |
| WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C | |
| WIRE, THERMOCOUPLE, SMOOTH SURFACE FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 \xb0C | |
| WIRE, THERMOCOUPLE, SMOOTH SURFACE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANG ANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 \xb0C | |
| Workforce data quality | |
| WRENCHING ELEMENT SPLINE DRIVE - DIMENSIONS FOR | |
| WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR |
| << Prev | Next >> |