Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
239
240
241
242
243
244
245
246
247
248
249
250
251
260
270
280
290
300
310
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) Aerospace - Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump | |
| (R) Aerospace \x96 Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump | |
| (R) Aerospace Cable, High Speed Data, Copper | |
| (R) Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems | |
| (R) Bearing, Ball, Bellcrank, Antifriction, Airframe | |
| (R) Bearings, Ball, Rod End, Double Row, Self-Aligning | |
| (R) CABLE, 4 PAIR 24 AWG COPPER ALLOY, SHIELDED, 100 OHM, 150 \xb0C ETHERNET 1000 BASE T | |
| (R) CABLE, HIGH SPEED DATA QUAD, 24 AWG COPPER ALLOY, 100 OHM, 200 \xb0C, ETHERNET 10/100 BASE T | |
| (R) CABLE, HIGH SPEED DATA QUAD, 24 AWG COPPER ALLOY, 110 OHM, 200 \xb0C | |
| (R) CABLE, HIGH SPEED DATA QUAD, COPPER ALLOY, 100 OHM, 200 \xb0C, ETHERNET 10/100 BASE T | |
| (R) Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts: Avoidance, Detection, Mitigation, and Disposition - Independent Distribution | |
| (R) Criteria for Laser Control Measures for Aviation Safety | |
| (R) FITTING ASSEMBLY, 45\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, 45\xb0, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, 90 DEGREES, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, ELBOW 45\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, ELBOW, 45\xb0, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, ELBOW, 45\xba, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, ELBOW, 90 DEGREES, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, ELBOW, 90\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| (R) FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI | |
| (R) FITTING, ELBOW, 45\xb0, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| (R) FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS, PRECISION TYPE | |
| (R) FITTING, TEE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE | |
| (R) Fittings, Axially Swaged Tube with Flareless Separable, Fluid System For Operating Pressures up to and including 5080 psi (35 000 kPa), Specification for | |
| (R) Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for | |
| (R) General Requirements for the Design and Testing of Civil Type Pressure Compensated, Variable Delivery Hydraulic Pumps | |
| (R) Hose Assembly, Polytetrafluoroethyl ene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 \xb0F (204 \xb0C), Aircraft Hydraulic Systems | |
| (R) Hose Assembly, Polytetrafluoroethyl ene, Metallic Reinforced, 3000 psi, 400 Degrees F, Heavyweight, Hydraulic | |
| (R) Interface Standard, Common Interface Control Plan | |
| (R) JAUS Environment Sensing Service Set | |
| (R) JAUS Manipulator Service Set | |
| (R) JAUS Mission Spooling Service Set | |
| (R) Performance Criteria for Laser Control Measures Used for Aviation Safety | |
| A method of temperature-rise assessment by extrapolation for partially type-test assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890, Ed. 1.0 (1987) MOD) | |
| Active and Battery Assisted Passive Tags Intended for Aircraft Use | |
| Aerospace Cable, High Speed Data, Copper | |
| Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems | |
| Aerospace-Civil Type Variable Delivery Hydraulic Pump | |
| Amendment Record for Drawing Standard No. AS60600 | |
| AMENDMENT RECORD No. AS60100-AR for Drawing Standard No. AS60100-199 | |
| AMENDMENT RECORD No. AS60200-AR for Drawing Standard No. AS60200-299 | |
| An appraisal of the problems of accelerated testing for atmospheric corrosion | |
| ARC Fault Circuit Breaker (AFCB), Aircraft, Trip-Free 28 VDC | |
| Arc welding equipment, Part 1: Welding power sources (IEC 60974-1:2000, MOD) | |
| AS6021 Aerospace Fiber Optic Cable Assembly Drawing Specification | |
| Axially Swaged Fittings, Installation and Inspection Procedure | |
| Bearings, Ball, Bellcrank, Antifriction, Airframe | |
| Bearings, Ball, Rod End, Double Row, Self-Aligning | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .375-24 UNJF-3A | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .4375-20 UNJF-3A | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .500-20 UNJF-3A Heat resisting alloy steel, FV535, unplated, Classification Rm = 1000 MPa (145,000 lbf/in\xb2) @ Ambient Temperature up to a maximum... | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, FV535, 0.1900 - 32 UNJF - 3A. BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, FV535, 0.3125 - 24 UNJF-3A. BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, FV535, 0.4375-20 UNJF-3A BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, FV535, 0.5000-20UNJF - 3A | |
| Bolt, Machine, Double Hexagon Extender Washer Head, P.D. Shank, FV535, 0.2500 - 28 UNJF - 3A. BS4084 | |
| Bolt, Machine, Double Hexagon, Extended Washer Head, P.D. Shank, FV535, 0.3750 - 24 UNJF-3A. BS4084 | |
| Bolt, Tee Head, Close Tol Shank FV535 0.1900-32 UNJF-3A.MOD.BS4084 | |
| Bolt, Tee Head, Close Tol Shank FV535 0.2500-28 UNJF-3A.MOD.BS4084 | |
| Bolt, Tee Head, Close Tol Shank FV535 0.3125-24 UNJF-3A.MOD.BS4084 | |
| Bolt, Tee Head, P.D. Shank, FV535, 0.2500 - 28 UNJF - 3A BS4084 | |
| Bolt, Tee Head, P.D. Shank, FV535, 0.3125 - 24 UNJF - 3A BS4084 | |
| Bolt, Tee Head, P.D. Shank, FV535, 0.3750 - 24 UNJF - 3A BS4084 | |
| Bolt, Tee Head, P.D. Shank, FV535, 0.4375 - 20 UNJF - 3A BS4084 | |
| Bolt, Tee Head, P.D. Shank, FV535, 0.5000 - 20 UNJF - 3A BS4084 | |
| BUSHING, SLEEVE, PLAIN CLAMP-UP | |
| BUSHING, SLEEVE, PLAIN INNER BORE LINER | |
| CABLE, 4 PAIR 24 AWG COPPER ALLOY, SHIELDED, 100 OHM, 150 \xb0C, ETHERNET 1000 BASE T | |
| CABLE, 4 PAIR 24 AWG COPPER ALLOY, SHIELDED, 100 OHM, 200 \xb0C, ETHERNET 1000 BASE T | |
| CABLE, 4 PAIR 24 AWG COPPER ALLOY, SHIELDED, 100 OHM, 200 \xb0C, ETHERNET 1000 BASE | |
| CABLE, HIGH PERFORMANCE, 4 PAIR, SHIELDED, 100 OHM, 200 \xb0C, ETHERNET 1000 BASE T (10G BASE T TO 33 METERS) | |
| CABLE, HIGH PERFORMANCE, 4 PAIR, SHIELDED, 100 OHM, 200 \xb0C, ETHERNET 1000 BASE T | |
| CABLE, HIGH PERFORMANCE, 4 PAIR, SHIELDED, 100 OHM, 200 \xb0C, ETHERNET 10G BASE T | |
| CABLE, HIGH SPEED DATA QUAD, 24 AWG COPPER ALLOY, 100 OHM, 200 \xb0C, ETHERNET 10/100 BASE T | |
| CABLE, HIGH SPEED DATA QUAD, 24 AWG COPPER ALLOY, 110 OHM, 200 \xb0C | |
| CABLE, LIGHTWEIGHT OPTIMIZED HIGH SPEED DATA QUAD, 110 OHM, 200 \xb0C | |
| Chain (3/8\x94 Pitch) & Fittings Assembly Code (Non-reversible Control) | |
| Chain (8mm Pitch) & Fittings Assembly Code (Non-reversible Control) | |
| Chain (\xbd\x94 Pitch) & Fittings Assembly Code (Non-reversible Control) | |
| CIVIL TYPE AIRCRAFT VARIABLE DELIVERY HYDRAULIC PUMP | |
| CLAMP, LOOP TYPE SUPPORTHEAT RESISTANT AMS5599 | |
| Control Unit, Pressure Generating, Manually Operated, Aircraft Hydraulic Brake System | |
| Cylinders, Carbon Dioxide Filled, Technical | |
| Degrees of protection provided by enclosures (IP Code) | |
| Dimensions of ball and socket couplings of string insulator units | |
| Dimensions of clevis and tongue couplings of string insulator units (IEC 60471, Ed 2.0:1977 MOD) | |
| Domestic electric meter enclosures | |
| Dried milk - Determination of titratable acidity (Reference method) (ISO 6091:2010, MOD) | |
| Drum, Metal - Shipping and Storage | |
| Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches) | |
| Edison screw lampholders (IEC 60238, Ed. 8.2 (2011) MOD) | |
| Electric irons for household or similar use - Methods for measuring performance | |
| Electrical installations in ships - Cables for control and instrumentation circuits 150/250 V (300 V) | |
| Electrical installations in ships - Sheathing materials for shipboard power and telecommunication cables | |
| Electrical installations in ships, Part 350: Shipboard power cables - General construction and test requirements | |
| Electrical installations in ships, Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables | |
| Electrical installations in ships, Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV | |
| Electrical installations in ships, Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um =... | |
| Electrical supply track systems for luminaires (IEC 60570:2003 (ED.4.2), MOD) | |
| Environmental testing, Part 1: General and guidance | |
| Environmental testing, Part 2.10: Tests - Test J and guidance: Mould growth | |
| Environmental testing, Part 2.11: Tests - Test Ka: Salt mist | |
| Environmental testing, Part 2.13: Tests - Test M: Low air pressure | |
| Environmental testing, Part 2.14: Tests - Test N: Change of temperature | |
| Environmental testing, Part 2.17: Tests - Test Q: Sealing | |
| Environmental testing, Part 2.18: Tests - Test R and guidance: Water | |
| Environmental testing, Part 2.1: Tests - Test A: Cold | |
| Environmental testing, Part 2.20: Tests - Test T: Soldering | |
| Environmental testing, Part 2.21: Tests - Test U: Robustness of terminations and integral mounting devices | |
| Environmental testing, Part 2.27: Tests - Test Ea and guidance: Shock | |
| Environmental testing, Part 2.29: Tests - Test Eb and guidance: Bump | |
| Environmental testing, Part 2.2: Tests - Test B: Dry heat | |
| Environmental testing, Part 2.30: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) | |
| Environmental testing, Part 2.31: Tests - Test Ec: Drop and topple, primarily for equipment-type specimens | |
| Environmental testing, Part 2.32: Tests - Test Ed: Free fall | |
| Environmental testing, Part 2.33: Tests - Guidance on change of temperature tests | |
| Environmental testing, Part 2.38: Tests - Test Z/AD: Composite temperature/humidity cyclic test | |
| Environmental testing, Part 2.39: Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test | |
| Environmental testing, Part 2.40: Tests - Test Z/AM: Combined cold/low air pressure tests | |
| Environmental testing, Part 2.41: Tests - Test Z/BM: Combined dry heat/low air pressure tests | |
| Environmental testing, Part 2.42: Tests - Test Kc: Sulphur dioxide test for contacts and connections | |
| Environmental testing, Part 2.43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections | |
| Environmental testing, Part 2.44: Tests - Guidance on test T: Soldering | |
| Environmental testing, Part 2.45: Tests - Test XA and guidance: Immersion in cleaning solvents | |
| Environmental testing, Part 2.46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections | |
| Environmental testing, Part 2.47: Tests - Mounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests | |
| Environmental testing, Part 2.48: Tests - Guidance on the application of the tests of AS 60068 to simulate the effects of storage | |
| Environmental testing, Part 2.49: Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections | |
| Environmental testing, Part 2.50: Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens | |
| Environmental testing, Part 2.51: Tests - Test Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens | |
| Environmental testing, Part 2.52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) | |
| Environmental testing, Part 2.53: Tests - Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests | |
| Environmental testing, Part 2.54: Tests - Test Ta: Soldering - Solderability testing by the wetting balance method | |
| Environmental testing, Part 2.55: Tests - Test Ee and guidance: Bounce | |
| Environmental testing, Part 2.57: Tests - Test Ff: Vibration - Time-history method | |
| Environmental testing, Part 2.58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) | |
| Environmental testing, Part 2.59: Tests - Test Fe: Vibration - Sine beat method | |
| Environmental testing, Part 2.5: Tests - Test Sa: Simulated solar radiation at ground level | |
| Environmental testing, Part 2.60: Tests - Test Ke: Flowing mixed gas corrosion test | |
| Environmental testing, Part 2.61: Tests - Test Z/ABDM: Climate sequence | |
| Environmental testing, Part 2.64: Tests - Test Fh: Vibration, broad-band random (digital control) and guidance | |
| Environmental testing, Part 2.65: Tests - Test Fg: Vibration, acoustically induced | |
| Environmental testing, Part 2.66: Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) | |
| Environmental testing, Part 2.67: Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components | |
| Environmental testing, Part 2.68: Tests - Test L: Dust and sand | |
| Environmental testing, Part 2.69: Tests - Test Te: Soldering - Solderability testing of electronic components for surface mount technology by the wetting balance method | |
| Environmental testing, Part 2.6: Tests - Test Fc: Vibration (sinusoidal) | |
| Environmental testing, Part 2.70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands | |
| Environmental testing, Part 2.74: Tests - Test Xc: Fluid contamination | |
| Environmental testing, Part 2.75: Tests - Test Eh: Hammer tests | |
| Environmental testing, Part 2.77: Tests - Test 77: Body strength and impact shock | |
| Environmental testing, Part 2.78: Tests - Test Cab: Damp heat, steady state | |
| Environmental testing, Part 2.7: Tests - Test Ga and guidance: Acceleration, steady state | |
| Environmental testing, Part 2.81: Tests - Test Ei: Shock - Shock response spectrum synthesis | |
| Environmental testing, Part 2.9: Tests - Guidance for solar radiation testing | |
| Environmental testing, Part 3.1: Background information - Section one: Cold and dry heat tests | |
| Environmental testing, Part 3.1A: Background information - Section one: Cold and dry heat tests - First supplement | |
| Environmental testing, Part 3.2: Background information - Combined temperature/low air pressure tests | |
| Environmental testing, Part 3.3: Guidance - Seismic test methods for equipment | |
| Environmental testing, Part 3.4: Supporting documentation and guidance - Damp heat tests | |
| Environmental testing, Part 3.5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers | |
| Environmental testing, Part 3.6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers | |
| Environmental testing, Part 3.7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) | |
| Environmental testing, Part 3.8: Supporting documentation and guidance - Selecting amongst vibration tests | |
| Environmental testing, Part 4: Information for specification writers - Test summaries | |
| Environmental testing, Part 5.2: Guide to drafting of test methods - Terms and definitions | |
| Fire hazard testing - Terminology concerning fire tests for electrotechnical products | |
| Fire hazard testing, Part 1.40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids | |
| Fire hazard testing, Part 10.3: Abnormal heat - Mould stress relief distortion test | |
| Fire hazard testing, Part 11.21: Test flames - 500 W vertical flame test method for tubular polymeric materials | |
| Fire hazard testing, Part 11.40: Test flames - Confirmatory tests - Guidance | |
| Fire hazard testing, Part 5.1: Corrosion damage effects of fire effluent - General guidance | |
| Fire hazard testing, Part 5.2: Corrosion damage effects of fire effluent - Summary and relevance of test methods | |
| Fire hazard testing, Part 5.3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method | |
| Fire hazard testing, Part 6.1: Smoke obscuration - General guidance | |
| Fire hazard testing, Part 6.2: Smoke obscuration - Summary and relevance of test methods | |
| Fire hazard testing, Part 6.30: Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in fires - Small scale... | |
| Fire hazard testing, Part 6.31: Smoke obscuration - Small-scale static test - Materials | |
| Fire hazard testing, Part 7.1: Toxicity of fire effluent - General guidance | |
| Fire hazard testing, Part 7.2: Toxicity of fire effluent - Summary and relevance of test methods | |
| Fire hazard testing, Part 7.3: Toxicity of fire effluent - Use and interpretation of test results | |
| Fire hazard testing, Part 7.50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method | |
| Fire hazard testing, Part 7.51: Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results | |
| Fire hazard testing, Part 8.1: Heat release - General guidance | |
| Fire hazard testing, Part 8.2: Heat release - Summary and relevance of test methods | |
| Fire hazard testing, Part 9.1: Surface spread of flame - General guidance | |
| Fire hazard testing, Part 9.2: Surface spread of flame - Summary and relevance of test methods | |
| FITTING ASSEMBLY, 45\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, 45\xb0, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, 90\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, 90\xb0, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/ | |
| FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW 45\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 45 DEGREE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 45\xb0, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 45\xb0, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 45\xba, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 90 DEGREE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 90\xb0, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, ELBOW, 90\xb0, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC 5080 PSI | |
| FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI | |
| FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI | |
| FITTING, 37\xb0 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45\xb0 | |
| FITTING, 37\xb0 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75\xb0 | |
| FITTING, 37\xb0 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90\xb0 | |
| FITTING, 37\xb0 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE | |
| FITTING, BOLT, FLARED, 37\xb0 SPHERICAL | |
| FITTING, CROSS, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 45 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 90 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 90 DEGREE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE | |
| FITTING, ELBOW, 90\xb0, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| FITTING, TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS, PRECISION TYPE | |
| FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS, PRECISION TYPE | |
| FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS, PRECISION TYPE | |
| FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS, PRECISION TYPE | |
| FITTING, TEE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE | |
| FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE | |
| Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for | |
| Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296, Ed. 4.0 (2012), MOD) | |
| Fraudulent/Counterfe it Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Distributors | |
| Glow-starters for fluorescent lamps | |
| Graphical symbols for use on equipment - Overview and application | |
| Graphical symbols for use on equipment, Part 2.1: General application | |
| Graphical symbols for use on equipment, Part 2.2: Audiovisual equipment | |
| Graphical symbols for use on equipment, Part 2.3: Telephone and telecommunications | |
| Graphical symbols for use on equipment, Part 2.4: Maritime navigation | |
| Graphical symbols for use on equipment, Part 2.5: Home electric appliances | |
| Graphical symbols for use on equipment, Part 2.6: Medical equipment | |
| Graphical symbols for use on equipment, Part 2.7: Safety aspects | |
| Hearing aids - Characteristics of electrical input circuits for hearing aids | |
| Hearing aids - Hearing aids with automatic gain control circuits | |
| Hearing aids - Hearing aids with induction pick-up coil input | |
| Hearing aids, Part 0: Measurement of electroacoustical characteristics | |
| Hearing aids, Part 12: Dimensions of electrical connector systems | |
| Hearing aids, Part 14: Specification of a digital interface device | |
| Hearing aids, Part 4: Magnetic field strength in audiofrequency induction loops for hearing aid purposes | |
| Hearing aids, Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes | |
| Hearing aids, Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions | |
| Hearing aids, Part 9: Methods of measurement of characteristics of hearing aids with bone vibrator output | |
| HIGH PRESSURE COMPRESSED GAS HOSE ASSEMBLIES FOR AIRCRAFT AND MISSILE GROUND SUPPORT EQUIPMENT | |
| High-voltage alternating current contactors and contactor-based motor starters | |
| High-voltage switches, Part 2: High-voltage switches for rated voltages of 52 kV and above (IEC 60265-2, Ed.1.0(1988) MOD) | |
| High-voltage test techniques - Partial discharge measurements | |
| High-voltage test techniques, Part 3: Definitions and requirements for on-site testing | |
| HOSE ASSEMBLY, POLYTETRAFLUORETHYLE NE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 MAX PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, 45\xb0 ELBOW TO 45\xb0 ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, 45\xb0 ELBOW TO 90\xb0 ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, 90\xb0 ELBOW TO 90\xb0 ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, STRAIGHT TO 45\xb0 ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, STRAIGHT TO 90\xb0 ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 \xb0F, 5080 PSI FLARELESS, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREE F, 5080 PSI FLARELESS, 90 DEGREES ELBOW TO 90 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREE F, 5080 PSI FLARELESS, STRAIGHT TO 45 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREE F, 5080 PSI FLARELESS, STRAIGHT TO 90 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREE ELBOW TO 90 DEGREE ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREES ELBOW TO 45 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREES ELBOW TO 90 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 90 DEGREE ELBOW TO 90 DEGREE ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 45 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 90 DEGREES ELBOW | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO STRAIGHT | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 \xb0F (204 \xb0C), Aircraft Hydraulic Systems | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 Degrees F (204 Degrees C), Aircraft Hydraulic Systems | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Braid Reinforced, 5080 psi (35,000 kPa), 400\xb0F (204\xb0C), Aircraft Hydraulic Systems (Supplement 1) | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Reinforced, 3000 psi, 400 \xb0F, Heavyweight, Hydraulic | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Reinforced, 3000 psi, 400 Degrees F, Heavyweight, Hydraulic and Pneumatic (Supplement 1) | |
| Hose Assembly, Polytetrafluoroethyl ene, Metallic Reinforced, 3000 psi, 400 Degrees F, Heavyweight, Hydraulic | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 MAX PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 PSI MAX, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45 DEGREE | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 PSI MAX, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90 DEGREE | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 PSI MAX, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90 DEGREES | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 DEGREE F, 3000 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90 DEGREE | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 Degrees F, 3000 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45 Degrees | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, PARA ARAMID REINFORCED, 275 Degrees F, 3000 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, POLYTETRAFLUOROTHYLE NE, PARA ARAMID REINFORCED, 275 \xb0F, 4000 PSI MAX, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45 DEGREE | |
| HOSE ASSEMBLY, TETRAFLUOROETHYLENE, 400 \xb0F, 3000 PSI HYDRAULIC, HEAVY BRAID | |
| Hose Assembly, Tetrafluoroethylene, 400 Degrees F, 3000 psi Hydraulic, Heavyweight | |
| HOSE ASSEMBLY, TETRAFLUOROETHYLENE, 400\xb0F, 3000 PSI HYDRAULIC, HEAVY BRAID | |
| Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies | |
| Instrument transformer - Current transformers | |
| Instrument transformers, Part 2: Voltage transformers | |
| Instrument transformers, Part 3: Combined transformers | |
| Instrument transformers, Part 5: Capacitor voltage transformers | |
| Insulation co-ordination Part 11: Definitions, principles and rules for HVDC system | |
| Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations | |
| Insulation co-ordination Part 1: Definitions, principles and rules | |
| Insulation co-ordination Part 2: Application guidelines | |
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin... | |
| Interface Standard, Common Interface Control Plan | |
| JAUS Environment Sensing Service Set | |
| JAUS HMI Service Set | |
| JAUS Manipulator Service Set | |
| JAUS Mission Spooling Service Set | |
| JAUS Mobility Service Set with ASCII files | |
| JAUS Mobility Service Set | |
| JAUS Unmanned Ground Vehicle Service Set | |
| Labels | |
| Lead-acid starter batteries, Part 1: General requirements and methods of test (IEC 60095-1:2018 (ED. 8.0), MOD) | |
| Lead-acid starter batteries, Part 6: Batteries for micro-cycle applications (IEC 60095-6:2019 (ED. 1.0), MOD) | |
| Live working - Electrical insulating gloves (IEC 60903:2014 (ED. 3.0) MOD) | |
| Locking devices for ball and socket couplings of string insulator units - Dimensions and tests | |
| Low-voltage fuses - General requirements | |
| Low-voltage fuses, Part 2.0: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: examples of types of standardized fuses | |
| Low-voltage fuses, Part 2.1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses | |
| Low-voltage fuses, Part 3.0: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) | |
| Low-voltage fuses, Part 3.1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized... | |
| Low-voltage fuses, Part 4.0: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Low-voltage fuses, Part 4.1: Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III - Examples of types of standardized fuse-links | |
| Low-voltage switchgear and controlgear - Circuit-breakers | |
| Low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Low-voltage switchgear and controlgear - General rules | |
| Low-voltage switchgear and controlgear, Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2015 (ED. 3.2) MOD) | |
| Low-voltage switchgear and controlgear, Part 4.1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear, Part 4.2: Contactors and motor-starters - A.C. semiconductor motor controllers and starters | |
| Low-voltage switchgear and controlgear, Part 5.1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear, Part 5.2: Control circuit devices and switching elements - Proximity switches | |
| Low-voltage switchgear and controlgear, Part 5.4: Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests | |
| Low-voltage switchgear and controlgear, Part 5.7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output | |
| Low-voltage switchgear and controlgear, Part 6.2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear, Part 7.1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear, Part 7.2: Ancillary equipment - Protective conductor terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear, Part 7.3: Ancillary equipment - Safety requirements for fuse terminal blocks | |
| Luminaires Part 2.4: Particular requirements \x97 Portable general purpose luminaires | |
| Luminaires, Method 2.18: Particular requirements - Luminaires for swimming pools and similar applications (IEC 60598-2-18 (ED.2.0) MOD) | |
| Luminaires, Part 2.22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22 Ed. 4.1 2017 MOD) | |
| Medical electrical equipment, Part 2.10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10:2016 (ED. 2.1), MOD) | |
| Medical electrical equipment, Part 2.19: Particular requirements for the basic safety and essential performance of infant incubators (IEC 60601-2-19:2009 (ED 2.1), MOD) | |
| Medical electrical equipment, Part 2.20: Particular requirements for the basic safety and essential performance of infant transport incubators (IEC 60601-2-20:2016 (ED. 2.1) MOD) | |
| Medical electrical equipment, Part 2.23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment (IEC 60601-2-23:2011 (ED. 3.0), MOD) | |
| Medical electrical equipment, Part 2.24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers (IEC 60601-2-24:2012 (ED. 2.0), MOD) | |
| Medical electrical equipment, Part 2.26: Particular requirements for the basic safety and essential performance of electroencephalograp hs (IEC 60601-2-26:2012 (ED. 3.0), MOD) | |
| Medical electrical equipment, Part 2.3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment (IEC 60601-2-3:2016 (ED.3.1), MOD) | |
| Medical electrical equipment, Part 2.4: Particular requirements for the basic safety and essential performance of cardiac defibrillators (IEC 60601-2-4:2010 (ED. 3.0), MOD) | |
| Medical electrical equipment, Part 2.54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (IEC 60601-2-54:2018 (ED. 1.2), MOD) | |
| Medical electrical equipment, Part 2.5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment (IEC 60601-2-5:2009 (ED 3.0), MOD) | |
| Medical electrical equipment, Part 2.6: Particular requirements for the basic safety and essential performance of microwave therapy equipment (IEC 60601-2-6:2016 (ED 2.1), MOD) | |
| Mineral insulating oils in electrical equipment-Supervisio n and maintenance guidance (IEC 60422, Ed.4.0 (2013) MOD) | |
| Organic and biodynamic products | |
| PACKING, PREFORMED, O-RING MOLDED FROM PERFLUOROETHER, FFO MATERIAL | |
| Performance Criteria for Laser Control Measures Used for Aviation Safety | |
| Power transformers, Part 10: Determination of sound levels (IEC 60076-10:2016 (ED. 2.0) MOD) | |
| Power transformers, Part 11: Dry-type transformers | |
| Power transformers, Part 1: General | |
| Power transformers, Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors | |
| Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery | |
| Rotating electrical machines - Thermal protection | |
| Rotating electrical machines, Part 12: Starting performance of single-speed three-phase cage induction motors | |
| Rotating electrical machines, Part 17: Cage induction motors when fed from converters - Application guide | |
| Rotating electrical machines, Part 1: Rating and performance | |
| Rotating electrical machines, Part 2.1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (IEC 60034-2-1:2014, (ED. 2.0) MOD) | |
| Rotating electrical machines, Part 2.2: Specific methods for determining separate losses of large machines from tests - Supplement to AS 60034.2.1 (IEC 60034-2-2:2010, (ED. 1.0) MOD) | |
| Rotating electrical machines, Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets | |
| Rotating electrical machines, Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors | |
| Rotating electrical machines, Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification | |
| Rotating electrical machines, Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) | |
| Rotating electrical machines, Part 8: Terminal markings and direction of rotation | |
| Rotating electrical machines, Part 9: Noise limits | |
| Safety of machinery - Electrical equipment of machines, Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC... | |
| Safety of machinery - Electrical equipment of machines, Part 1: General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) | |
| Semiconductor converters - Self-commutated semiconductor converters including direct d.c. converters | |
| Semiconductor converters, Part 1.1: General requirements and line commutated converters - Specifications of basic requirements | |
| Semiconductor converters, Part 1.2: General requirements and line commutated converters - Application guide | |
| Semiconductor converters, Part 1.3: General requirements and line commutated converters - Transformers and reactors | |
| SLEEVE, CHAFE PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +175 \xb0C) | |
| SLEEVE, CHAFE-PROTECTION, EXPANDABLE (-55 TO +200 \xb0C) | |
| SLEEVE, CHAFE-PROTECTION, EXPANDABLE (-55 TO +240 \xb0C) | |
| SLEEVE, CHAFE-PROTECTION, HIGH ABRASION EXPANDABLE (-55 TO +200 \xb0C) | |
| SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +200 \xb0C) | |
| SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55\xb0 TO +260\xb0C) | |
| Sleeve, Protection, For Cable and Harness Protection | |
| Sound systems for emergency purposes (IEC 60849:1998 MOD) | |
| Standard voltages | |
| Stationary lead-acid batteries, Part 11: Vented types - General requirements and methods of tests (IEC 60896-11:2002 (ED 1.0) MOD) | |
| Stationary lead-acid batteries, Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004 (ED 1.0) MOD) | |
| Stationary lead-acid batteries, Part 22: Valve regulated types - Requirements (IEC 60896-22:2004 (ED 1.0) MOD) | |
| Surge arresters, Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2014 (ED. 3.0) MOD) | |
| Surge arresters, Part 5: Selection and application recommendations (IEC 60099-5:2018 (ED. 3.0), MOD) | |
| Switches for household and similar fixed electrical installations, Part 2.1: Particular requirements - Electronic switches (IEC 60669-2-1:2015, MOD) | |
| Tap-changers - Application guide | |
| Tap-changers, Part 1: Performance requirements and test methods | |
| Telecontrol equipment and systems, Part 1.1: General considerations - General principles | |
| Telecontrol equipment and systems, Part 1.2: General considerations - Guide for specifications | |
| Telecontrol equipment and systems, Part 1.3: General considerations - Glossary | |
| Telecontrol equipment and systems, Part 1.4: General considerations - Basic aspects of telecontrol data transmission and organization of Standards IEC 60870-5 and IEC 60870-6 | |
| Telecontrol equipment and systems, Part 2.1: Operating conditions - Power supply and electromagnetic compatibility | |
| Telecontrol equipment and systems, Part 3: Interfaces (electrical characteristics) | |
| Telecontrol equipment and systems, Part 4: Performance requirements | |
| Telecontrol equipment and systems, Part 5.1: Transmission protocols - Transmission frame formats | |
| Telecontrol equipment and systems, Part 5.2: Transmission protocols - Link transmission procedures | |
| Telecontrol equipment and systems, Part 5.3: Transmission protocols - General structure of application data | |
| Telecontrol equipment and systems, Part 5.4: Transmission protocols - Definition and coding of application information elements | |
| Telecontrol equipment and systems, Part 5.5: Transmission protocols - Basic application functions | |
| Tests, Impact, Shock Absorber Landing Gear, Aircraft | |
| TTP Communication Protocol | |
| Verification Methods for AS5653 Network Controller | |
| Verification Methods for AS5653 Network Terminal | |
| Voltage measurement by means of standard air gaps | |
| Working platforms for housing construction | |
| Wrench, Spanner |
| << Prev | Next >> |