Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
160
170
180
190
200
210
214
215
216
217
218
219
220
221
222
223
224
225
226
230
240
250
260
270
280
300
350
400
450
500
550
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY | |
| (R) FERRULES, OUTER, INSULATED, SHIELD TERMINATING, TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE | |
| (R) FERRULES, OUTER, INSULATED, SHIELD TERMINATING,TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE | |
| (R) Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi | |
| (R) Fittings, 24 degrees Cone Flareless, Fluid Connection, 3000 psi | |
| (R) Fittings, 24\xb0 Cone Flareless, Fluid Connection, 3000 psi | |
| (R) Lighting, Aircraft Interior, Installation of | |
| (R) Nozzles and Ports - Gravity Fueling Interface Standard for Civil Aircraft | |
| (R) Nut, Fitting, Retained, Lightweight | |
| (R) Reducers, Oxygen Pressure | |
| (R) SHIELD FOR USE WITH AS90362 EXTERNAL POWER RECEPTACLES | |
| (R) Sleeve, Bite Type, 24 degrees Cone Flareless Fitting, 3000 psi | |
| (R) Sleeves, Internally or Externally Swaged or Welded, 24 Degrees Cone Flareless Fitting, 3000 psi | |
| (R) Terminology for Titanium Microstructures | |
| (R) WIRE, RETAINER - TUBE COUPLING NUT | |
| 45 CWT Cable & Swaged End Assembly Code | |
| 7-bit coded character set for information processing interchange | |
| Abrasive wheels - Selection, care, and use | |
| Abrasive wheels, Part 1: Design, construction, and safeguarding | |
| Aeration cabinets (for use with ethylene oxide sterilizers) | |
| Air-conditioning units - Methods of assessing and rating performance - Refrigerated package air-conditioners | |
| Air-conditioning units - Methods of assessing and rating performance - Refrigerated room air-conditioners | |
| Aluminium foil/vegetable parchment laminates for wrapping dairy products | |
| Aluminium ingots and aluminium alloy ingots and castings | |
| Articulated vehicles - Fifth wheel assemblies | |
| Artificial lighting for clinical observation | |
| Assembly of Chain End Bolt (Roller omitted) | |
| Assembly of Chain to Cable Spool | |
| Assembly of Chain to Connector - 4BA | |
| Austenitic iron castings | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, DTD5066, .187-32 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, DTD5066, .247-28 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, DTD5066, .3095-24 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, DTD5066, .372-24 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .187-32 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .247-28 UNS-3A | |
| Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .3095-24 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR601, .187-32 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR601, .247-28 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR601, .3095-24 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR601, .372-24 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .247-28 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .3095-24 UNS-3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Cupwasher Locked, HR650, .372-24 UNS-3A | |
| Boss, Low Pressure (500 psi) Standard Dimensions For | |
| Cable glands for explosive gas atmospheres | |
| Cable Spool, Chain | |
| Carbon dioxide type portable fire extinguishers | |
| Chain Assembly (Inner Link at end) | |
| Child barriers for domestic premises | |
| Child restraint systems for use in motor vehicles - General requirements | |
| Child restraint systems for use in motor vehicles - Type A1 child restraints (rearward-facing enclosing restraint) | |
| Child restraint systems for use in motor vehicles - Type B child restraints (forward-facing chair with harness) | |
| Child restraint systems for use in motor vehicles | |
| Chromate conversion coatings on zinc and cadmium electrodeposits | |
| Cleanrooms, workstations and safety cabinets - Methods of test - Apparatus | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 20: Determination of sound level at installed workstations and safety cabinets | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 21: Determination of inward air velocity of Class I biological safety cabinets | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 22: Determination of air barrier containment of laminar flow safety cabinets | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 23: Determination of intensity of radiation from germicidal ultraviolet lamps | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 24: Determination of recovery times of cleanrooms | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 25: Determination of gas tightness of outer shell of biological safety cabinets | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 5: Determination of work zone integrity | |
| Cleanrooms, workstations and safety cabinets - Methods of test, Method 7: Determination of integrity of HEPA filter installations not terminally mounted | |
| Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test, Method 26: Determination of air barrier containment of laminar flow safety cabinets - Potassium iodidediscus test | |
| Coated abrasives (technical products) | |
| Code for the design and installation of helical loc-seam corrugatedsteel pipes | |
| Code of practice for application of ergonomics to factory and office work | |
| Code of practice for in-ground installation of premoulded reinforcedplastics swimming pools | |
| Code of practice for milking installations known as the SAA MilkingMachine Code | |
| Code of practice for security of raw wool samples for display purposes | |
| Code of practice for the fixing of concrete interlocking roofing tiles(with weathering check) | |
| Code of practice for the laying of resilient sheet and tile floor coverings | |
| Code of practice for the use, care and guarding of abrasive wheels knownas the SAA Abrasive wheels safety code | |
| Code of recommended practice for the manufacture of powered pleasureboats and requirements for motors, associated systems and equipment(known as the SAA Small Boats Code) | |
| Commercial tolerances on finished parts of fluorocarbon | |
| COMPASS, MAGNETIC, PILOT'S STANDBY | |
| Compass, Magnetic, Pilot\xb4s Standby | |
| Concrete roofing tiles | |
| Connector, Chain - Internal Thread | |
| Copper brazed steel tubes | |
| Corespun cotton/polyester duck | |
| COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY | |
| Diaphragms for contraceptive use Metric Units | |
| Distance Piece (Plain Bearing, Cable Pulleys) | |
| Distance Piece (Plain Bearing, Chain Pulleys) | |
| Domestic incinerators (fire safety) | |
| Dry chemical type portable fire extinguishers | |
| Earth and bonding clamps | |
| Earth-moving machinery and mining - Autonomous and semi-autonomous machine system safety (ISO 17757:2019, MOD) | |
| Electric irons for household use | |
| Electrical equipment for explosive atmospheres - Special protection - Type of protection s | |
| Electrical Power, 270 V DC, Aircraft, Characteristics and Utilization of | |
| Electrical Power, High Voltage Direct Current, Aircraft, Characteristics and Utilization of | |
| Electrodes and fluxes for submerged-arc welding - Carbon steels and carbon-manganese steels | |
| Electrodes and fluxes for submerged-arc welding - Low and intermediate alloy steels | |
| Electrodes and fluxes for submerged-arc welding of carbon and low alloysteels | |
| Electroplated coatings of cadmium on iron and steel | |
| Electroplated coatings of silver for decorative applications | |
| Electroplated coatings of silver for engineering applications | |
| Electroplated coatings of zinc on iron and steel | |
| Explosive-powered hand-held fastening tools, fasteners and explosive charges | |
| Ferrules, Outer, Insulated, Shield Terminating, Type II Two-Piece, Class I, for Shielded Cable | |
| Fiber Optics Mechanization of a Digital Time Division Command/Response Multiplex Data Bus | |
| Fibre rope (eight-strand plaited polypropylene) Metric Units | |
| Fitting End, Non- Reversible, Flared Tube Connection, Oversize Thread | |
| Fitting End, Non- Reversible, Flareless Tube Connection, Oversize Thread | |
| Fitting End, Non- Reversible, Straight Thread, Boss Connection | |
| Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread | |
| FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 3000 PSI | |
| Fittings, 24 Degrees Cone Flareless, Fluid Connection, 3000 psi | |
| Fittings, 24\xb0 Cone Flareless, Fluid Connection, 3000 psi (Supplement 1) | |
| Flat pressed particleboard | |
| Flax canvas, including water-bag canvas | |
| Flooring milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Flooring milled from cypress pine | |
| Foam (chemical) type portable fire extinguishers | |
| Food microbiology - Examination for specific organisms, Part 2.15: Listeria monocytogenes in dairy products | |
| Food microbiology, Method 1.1: General procedures and techniques - Samples, materials, equipment, laboratory practice | |
| Food microbiology, Method 1.2: General procedures and techniques - Preparation of dilutions | |
| Food microbiology, Method 1.3: General procedures and techniques - Colony count - Pour plate method | |
| Food microbiology, Method 1.4: General procedures and techniques - Colony count - Surface spread method | |
| Food microbiology, Method 1.5: General procedures and techniques - Colony count - Membrane filtration method | |
| Food microbiology, Method 1.6: General procedures and techniques - Estimation of the most probable number (MPN) of microorganisms | |
| Food microbiology, Method 2.13: Examination for specific organisms - Campylobacter | |
| Food microbiology, Method 2.14: Examination for specific organisms - Psychrotrophic organisms in dairy products | |
| Food microbiology, Method 2.1: Examination for specific organisms - Standard plate count | |
| Food microbiology, Method 2.6: Examination for specific organisms - Bacillus cereus | |
| Food microbiology, Method 2.7: Examination for specific organisms - Clostridium botulinum and Clostridium botulinum toxin | |
| Food microbiology, Method 2.8: Examination for specific organisms - Clostridium perfringens | |
| Food microbiology, Method 2.9: Examination for specific organisms - Vibrio parahaemolyticus | |
| Food microbiology, Method 3.10: Examination of specific products - Liquid milks - Direct microscopic count | |
| Food microbiology, Method 3.11: Examination of specific products - Dairy products - Test for penicillin | |
| Food microbiology, Method 3.12: Examination of specific products - Cultured dairy products | |
| Food microbiology, Method 3.13: Examination of specific products - Liquid milks and creams | |
| Food microbiology, Method 3.14: Examination of specific products - Butter and related products | |
| Food microbiology, Method 3.15: Examination of specific products - Cheese | |
| Food microbiology, Method 3.16: Examination of specific products - Long shelf life dairy products in hermetically sealed containers | |
| Food microbiology, Method 3.17: Examination of specific products - Sweetened condensed milks | |
| Food microbiology, Method 3.18: Examination of specific products - Rennets | |
| Food microbiology, Method 3.8: Examination of specific products - Eggs and egg products | |
| Food microbiology, Part 0: General introduction and list of methods | |
| Foundry pig iron | |
| Fuel and Oil Lines, Aircraft, Installation of | |
| General purpose detergents for use in the dairying industry | |
| Glossary of terms for industrial trucks, attachments and movements | |
| Gravity Refueling Nozzles and Ports Interface Standard for Civil Aircraft | |
| Grey iron castings | |
| Guide to maintenance and supervision of insulating oils in service | |
| Hard-drawn copper conductors for overhead power transmission purposes | |
| Helical lock-seam corrugated steel pipes | |
| High wet-strength greaseproof paper for wrapping dairy products | |
| High-voltage alternating current contactors | |
| Hinges (Aluminium Alloy Double Flange Plates) | |
| Hinges (Aluminium Alloy Single Flange Plates) | |
| HINGES, ALUMINIUM ALLOY, SINGLE FLANGE PLATES | |
| Hologenated hydrocarbon type portable fire extinguishers | |
| Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas, Part 0: General requirements | |
| Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas, Part 1: Non-metallic liners | |
| Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas, Part 2: Metallic liners | |
| Hose and hose assemblies for liquefied petroleum gases (LP Gas) | |
| Hose Assembly, Rubber, Flareless, Field Attachable Fitting, 45 Degrees to 45 Degrees | |
| Hose Assembly, Rubber, Flareless, Field Attachable Fitting, 45 Degrees to 90 Degrees | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 90\xb0 TO 90\xb0 | |
| Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to 45 Degrees | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 45\xb0 | |
| Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to 90 Degrees | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO STRAIGHT | |
| Identification colours for portable fire extinguishers | |
| Indicator, Humidity, Plug, Color Change | |
| Industrial safety helmets | |
| Installation of fifth wheel and turntable assemblies | |
| Installation of particleboard flooring | |
| Installation of Window Anti-Icing, De-Greasing, and Washing Systems (General Specification for) | |
| Installation, Non- Reversible Fitting End | |
| Instruments for measuring gas concentration in explosive atmospheres | |
| Insulating liquids - Specification for unused mineral insulating oils for transformers and switchgear | |
| Insulating liquids, Method 2.1: Determination of the breakdown voltage at power frequency | |
| Insulating liquids, Method 2.2: Test methods - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity | |
| Insulating liquids, Method 2.3: Test methods - Method of sampling liquid dielectrics | |
| Insulating liquids, Method 2.4: Test methods - Detection and determination of specified anti-oxidant additives in insulating oils | |
| Insulating liquids, Method 2.5: Test methods - Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability | |
| Insulating liquids, Method 2.7: Test methods - Determination of PCB contamination in insulating liquids by capillary column gas chromatography - Identification of congeners | |
| Insulating liquids, Method 2.8: Test methods - Determination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration (IEC 60814, Ed. 2.0 (1997) MOD) | |
| Insulating oil for transformers and switchgear | |
| Insulation coordination, Part 1: Basic principles, standard insulation levels and test procedures | |
| Insulation coordination, Part 2: Application guide | |
| International electrotechnical vocabulary - Acoustics and electro-acoustics | |
| International electrotechnical vocabulary - Electric and magnetic circuits | |
| International electrotechnical vocabulary - Electric and magnetic devices | |
| International electrotechnical vocabulary - Electric cables | |
| International electrotechnical vocabulary - Electrical installations of buildings | |
| International electrotechnical vocabulary - Electrical measuring instruments | |
| International electrotechnical vocabulary - Electrical relays | |
| International electrotechnical vocabulary - Electromagnetic interference | |
| International electrotechnical vocabulary - Electromechanical components for electronic equipment | |
| International electrotechnical vocabulary - Electronic measuring instruments | |
| International electrotechnical vocabulary - Electronic tubes | |
| International electrotechnical vocabulary - Industrial electroheating | |
| International electrotechnical vocabulary - Instrument transformers | |
| International electrotechnical vocabulary - Insulators | |
| International electrotechnical vocabulary - Lighting | |
| International electrotechnical vocabulary - Mathematics | |
| International electrotechnical vocabulary - Power electronics | |
| International electrotechnical vocabulary - Power system protection | |
| International electrotechnical vocabulary - Radiology and radiological physics | |
| International electrotechnical vocabulary - Recording and reproduction of sound and video | |
| International electrotechnical vocabulary - Semiconductor devices and integrated circuits | |
| International electrotechnical vocabulary - Switchgear, controlgear and fuses | |
| International electrotechnical vocabulary - Tariffs for electricity | |
| International electrotechnical vocabulary - Telecommunications, channels and networks | |
| International electrotechnical vocabulary - Telecontrol | |
| International electrotechnical vocabulary - Transductors | |
| International electrotechnical vocabulary - Transmission lines and waveguides | |
| International electrotechnical vocabulary, Part 111.01: Physics and chemistry - Physical concepts | |
| International electrotechnical vocabulary, Part 111.02: Physics and chemistry - Electrochemical concepts | |
| International electrotechnical vocabulary, Part 301: General terms on measurements in electricity | |
| International electrotechnical vocabulary, Part 351: Automatic control | |
| International electrotechnical vocabulary, Part 601: Generation, transmission and distribution of electricity - General | |
| International electrotechnical vocabulary, Part 602: Generation, transmission and distribution of electricity - Generation | |
| International electrotechnical vocabulary, Part 603: Generation, transmission and distribution of electricity - Power system planning and management | |
| International electrotechnical vocabulary, Part 604: Generation, transmission and distribution of electricity - Operation | |
| International electrotechnical vocabulary, Part 605: Generation, transmission and distribution of electricity - Substations | |
| Intrinsically safe electrical apparatus for explosive atmospheres | |
| Joinery timber milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Laminated sheets and composite boards for electrical purposes, Part 1: Classification and general requirements | |
| Laminated sheets and composite boards for electrical purposes, Part 2: Dimensions of switchboard panels | |
| Laundry tablet or bar soap | |
| Lead ingot | |
| Lighting, Aircraft Interior, Installation of | |
| Lightning protection | |
| Limits, Table of Limits and Lubrication Charts | |
| Limits, Table of Limits, and Lubrication Charts | |
| Lining boards milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Loomstate cotton duck | |
| Low voltage switchgear and controlgear - Air-break switches, isolators and fuse-combination units (up to and including 1000 V a.c. and 1200 V d.c.) | |
| Maintenance of fire protection equipment - Automatic fire detection and alarm systems | |
| Maintenance of fire protection equipment - Automatic smoke/heat venting systems | |
| Maintenance of fire protection equipment - Delivery layflat fire hose | |
| Maintenance of fire protection equipment - Emergency warning and intercommunication systems | |
| Maintenance of fire protection equipment - Fire-resistant doorsets | |
| Maintenance of fire protection equipment - Gaseous fire extinguishing systems | |
| Maintenance of fire protection equipment - Halon 1301 total flooding systems | |
| Maintenance of fire protection equipment - Local fire alarm systems | |
| Maintenance of fire protection equipment - Management procedures for maintaining the fire precaution features of air-handling systems | |
| Maintenance of fire protection equipment - Pumpset systems | |
| Maintenance of fire protection equipment, fire extinguishers and firehose reels | |
| Maintenance of fire protection equipment, Part 1: Portable fire extinguishers | |
| Maintenance of fire protection equipment, Part 2: Fire hose reels | |
| Maintenance of fire protection equipment, Part 3: Automatic fire sprinkler systems | |
| Maintenance of fire protection equipment, Part 4: Fire hydrant installations | |
| Maintenance of fire protection equipment, Part 6: Management procedures for maintaining the fire and smoke control features of air-handling systems - Typical maintenance schedule (Supplement to AS 1851.6-1997) | |
| Maintenance of fire protection equipment, Part 8: Automatic fire detection and alarm systems - System certificates and maintenance records (Supplement to AS 1851.8-1987) | |
| Malleable iron castings | |
| Markings for Aircrew Station Displays Design and Configuration of | |
| Material for soldering - Solder alloys | |
| Material for soldering, Part 2: Flux-cored solders | |
| Metallic materials - Brinell hardness test, Method 3: Calibration of reference blocks | |
| Metallic materials - Brinell hardness test, Method 4: Table of hardness values | |
| Metallic materials - Brinell hardness test | |
| Metallic materials - Rockwell hardness test, Method 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) | |
| Metallic materials - Rockwell hardness test | |
| Metallic materials - Vickers hardness test, Method 3: Calibration of reference blocks | |
| Metallic materials - Vickers hardness test | |
| Method for Brinell hardness test - Calibration of the testing machine | |
| Method for Brinell hardness test - Testing of metals | |
| Method for Rockwell hardness test - Calibration of the testing machine | |
| Method for Rockwell hardness test - Testing of metals | |
| Method for the determination of K-values of a tensile testing system | |
| Method for the end-quench test for hardenability of steel (Jominy test) | |
| Method for Vickers hardness test - Calibration of the testing machine | |
| Method for Vickers hardness test - Testing of metals | |
| Methodology of Calculating Aircraft Cargo Volumes | |
| Methods for physical testing of refractories and refractory materials, Method 10: The determination of pyrometric cone equivalent (refractoriness) | |
| Methods for physical testing of refractories and refractory materials, Method 13: The determination of permanent dimensional change after heating | |
| Methods for physical testing of refractories and refractory materials, Method 1: The determination of cold compressive strength | |
| Methods for physical testing of refractories and refractory materials, Method 5: The determination of density, porosity and water absorption | |
| Methods for the determination of transverse tensile properties of round steel pipes | |
| Methods for the microbiological examination of food - Escherichia coli - Direct plate method, Part 2.12: Examination for specific organisms | |
| Methods for the microbiological examination of food, Part 1: General procedures and techniques | |
| Methods for the microbiological examination of food, Part 2.2: Examination for specific organisms - Colony count of yeast and moulds | |
| Methods for the microbiological examination of food, Part 2.3: Examination for specific organisms - Coliforms and Escherichia coli | |
| Methods for the microbiological examination of food, Part 2.4: Examination for specific organisms - Coagulase-positive Staphylococci | |
| Methods for the microbiological examination of food, Part 2.5: Examination for specific organisms - Salmonellae | |
| Methods for the microbiological examination of food, Part 2: Examination for specific organisms | |
| Methods for the microbiological examination of food, Part 3.1: Examination of specific products Meat and meat products other than poultry | |
| Methods for the microbiological examination of food, Part 3.2: Examination of specific products - Poultry | |
| Methods for the microbiological examination of food, Part 3.3: Examination of specific products Dehydrated Foods | |
| Methods for the microbiological examination of food, Part 3.4: Examination of specific products - Frozen foods | |
| Methods for the microbiological examination of food, Part 3.5: Examination of specific products - Molluscs, crustaceans and fish, and products thereof | |
| Methods for the microbiological examination of food, Part 3.6: Examination of specific products - Margarine | |
| Methods for the microbiological examination of food, Part 3.7: Examination of specific products - Heat-processed foods in hermetically sealed containers | |
| Methods for the microbiological examination of food, Part 4.0: Sampling of foods - Scope and general requirements | |
| Methods for the microbiological examination of food, Part 4.1: Sampling of foods - Meat and meat products other than poultry | |
| Methods for the microbiological examination of food, Part 4: Sampling of foods | |
| Methods for the microbiological examination of food, Part 5: Preparation of media, diluents and reagents | |
| Methods of physical testing of refractories and refractory materials, Method 3: The determination of cold modulus of rupture | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 10: Air pressure of cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 11: Airflow parallelism and dispersion in laminar flow cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 12: Temperature and relative humidity | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 13: Humidity by psychrometer aspiration | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 14: Humidity by psychrometer whirling (sling) | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 15: Light intensity | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 16: Sound levels in cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 17: Vibration in cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 18: Vibration in work-stations | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 19: Sizing and counting particulate contaminant in and on cleanroom garments | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 1: Air velocity and uniformity of clean work-stations | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 2: Air velocity under loaded filter conditions of clean work-stations | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 3: Air velocity and uniformity of laminar flow cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 4: Air velocity under loaded conditions of laminar flow cleanrooms | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 6: Final filter installation integrity | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 8: Gross particle count in work zone by automatic particle counter | |
| Methods of test for cleanrooms, work-stations and their accessories, Method 9: Gross particle count in work zone of cleanrooms by microscopic sizing and counting | |
| Metric units in welding | |
| Mouldings milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Nozzles and Ports - Gravity Fueling Interface Standard for Civil Aircraft | |
| NOZZLES AND PORTS - GRAVITY FUELING INTERFACE STANDARDS FOR CIVIL AIRCRAFT (STABILIZED TYPE) | |
| Nozzles and Ports \x96 Gravity Fueling Interface Standards for Civil Aircraft | |
| NUT, FITTING, LIGHTWEIGHT, FLARELESS | |
| NUT, FITTING, RETAINED, LIGHTWEIGHT | |
| Nut, Sleeve Coupling, Tube Reducer, Flared | |
| Nut, Sleeve Coupling, Tube Reducer, Flareless | |
| Operating Instructions for Aircraft Engines (Preparation of) | |
| Outdoor weathering of plastics in the Australian environment - Commercial products | |
| Outdoor weathering of plastics in the Australian environment, Part 2: Guide for design purposes | |
| Particleboard flooring, Part 2: Installation | |
| PERFORMANCE PRESENTATION, AIRCRAFT RECIPROCATING ENGINE - TWO SPEED ENGINE | |
| Petrol (gasoline) for motor vehicles - Leaded petrol | |
| Petrol (gasoline) for motor vehicles - Unleaded petrol | |
| Petrol (Gasoline) for motor vehicles | |
| Portable fire extinguishers - Carbon dioxide type | |
| Portable fire extinguishers - Foam type | |
| Portable fire extinguishers - General requirements | |
| Portable fire extinguishers - Powder type | |
| Portable fire extinguishers - Vapourizing-liquid type | |
| Portable fire extinguishers - Water type | |
| Portable fire extinguishers foam (gas container) type | |
| Portable fire extinguishers foam (stored pressure) type | |
| Preferred dimensions for lighting columns and bracket arms | |
| Preservative-treated cladding (weatherboards and chamferboards) milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Preservative-treated fascia boards and barge boards milled from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Pressurized enclosure of electrical equipment for explosive atmospheres | |
| Principles of limit state design method | |
| PROPELLER HUB-SINGLE ROTATION | |
| Pulley (Plain Bearing) | |
| Pulley - (B.S.1 Chain, 8mm Pitch) | |
| Pulley - (B.S.2 Chain, 3/8\x94 Pitch) | |
| Pulley - (B.S.4 Chain, \xbd\x94 Pitch) | |
| Pulley - (B.S.6 Chain, \xbd\x94 Pitch) | |
| Recommendations for line scales for recording instrument charts | |
| Reconstituted wood-based panels - Specifications, Part 1: Particleboard | |
| Reducers, Oxygen Pressure | |
| Refractories and refractory materials - Physical test methods, Method 11: Thermal expansion (reversible) | |
| Refractories and refractory materials - Physical test methods, Method 12: Refractoriness under load - Temperatures of deformation at constant load with rising temperature | |
| Refractories and refractory materials - Physical test methods, Method 14: Thermal conductivity | |
| Refractories and refractory materials - Physical test methods, Method 19: The determination of sieve analysis and water content | |
| Refractories and refractory materials - Physical test methods, Method 21: The determination of workability index of mouldable refractories | |
| Refractories and refractory materials - Physical test methods, Method 22: Bonding strength of refractory mortar | |
| Refractories and refractory materials - Physical test methods, Method 23.1: Abradability index - Oblique method | |
| Refractories and refractory materials - Physical test methods, Method 23.2: Abradability index - Perpendicular method | |
| Refractories and refractory materials - Physical test methods, Method 23: Abradability index | |
| Refractories and refractory materials - Physical test methods, Method 24: Resistance to thermal shock | |
| Refractories and refractory materials - Physical test methods, Method 25: The determination of powder density (using Rees-Hugill flask) | |
| Refractories and refractory materials - Physical test methods, Method 26: Creep in compression - Deformation under constant load and constant temperature | |
| Refractories and refractory materials - Physical test methods, Method 27: Modulus of rupture at elevated temperatures | |
| Refractories and refractory materials - Physical test methods, Method 28: Ceramic fibre products - Test methods | |
| Refractories and refractory materials - Physical test methods, Method 29: Cast coverage | |
| Refractories and refractory materials - Physical test methods, Method 2: Determination of bulk density of granular materials | |
| Refractories and refractory materials - Physical test methods, Method 30: Drying and firing schedules | |
| Refractories and refractory materials - Physical test methods, Method 31.1: Modulus of elasticity - Flexural method | |
| Refractories and refractory materials - Physical test methods, Method 31.2: Modulus of elasticity - Compression method | |
| Refractories and refractory materials - Physical test methods, Method 32: Refractory products containing carbon - Test methods | |
| Refractories and refractory materials - Physical test methods, Method 33: Determination of the setting time of castables | |
| Refractories and refractory materials - Physical test methods, Method 34: Guide to the determination of extrusion pressure and curing time of taphole clay | |
| Refractories and refractory materials - Physical test methods, Method 35: Guide to the determination of resistance to corrosive reagents | |
| Refractories and refractory materials - Physical test methods, Method 36: Determination of resistance to explosive spalling | |
| Refractories and refractory materials - Physical test methods, Method 4.1: Preparation of test pieces - Castable refractories | |
| Refractories and refractory materials - Physical test methods, Method 4.2: Preparation of test pieces - Low-cement castable refractories | |
| Refractories and refractory materials - Physical test methods, Method 4.3: Preparation of test pieces - Unshaped refractories on site | |
| Refractories and refractory materials - Physical test methods, Method 4.4: Preparation of test pieces - Mouldable refractories | |
| Refractories and refractory materials - Physical test methods, Method 4.5: Preparation of test pieces - Gunning refractories | |
| Refractories and refractory materials - Physical test methods, Method 6: The determination of true density | |
| Refractories and refractory materials - Physical test methods, Method 7: Determination of permeability to gases | |
| Refractories and refractory materials - Physical test methods, Method 9: The determination of resistance to the disintegrating effects of carbon monoxide | |
| Refrigerated room air conditioners | |
| Repair and testing of trailing cables and feeder cables used for mining | |
| Rules for fire-tube boilers Class 1 - Welded construction | |
| Rules for the certification of welders known as the SAA WeldingCertification Code | |
| Rules for the classification, fire testing and rating of portable fireextinguishers | |
| Rules for the design and construction of single automatic oil and gasburners and their application to boilers | |
| Safe operation of conveyors including design, construction, maintenanceand inspection (known as the SAA Conveyor Safety Code) | |
| Safety chains for trailers and caravans | |
| Sawn boards from Australian grown conifers (softwoods) (excluding radiata pine and cypress pine) | |
| Sea water temperatures for cooling of ships machinery | |
| Seamless aluminium cylinders for compressed gases (0.10 to 130 litres) | |
| Seemless steel tubes for pressure purposes | |
| Separative devices - Biological and cytotoxic drug safety cabinets, clean workstations and pharmaceutical isolators - Methods of test | |
| Shield for Use with MS90362 External Power Receptacles | |
| Sleeve, Bite Type, 24 Degrees Cone Flareless Fitting, 3000 psi | |
| Sleeve, Bite Type, 24\xb0 Cone Flareless Fitting, 3000 psi | |
| Sleeve, Internally or Externally or Externally Swaged or Welded, 24 degrees Cone Flareless Fitting, 3000 psi | |
| Sleeves, Internally or Externally Swaged or Welded, 24\xb0 Cone Flareless Fitting, 3000 psi | |
| Small pleasure boats code - Aluminium construction | |
| Small pleasure boats code - Engineering | |
| Small Pleasure Boats Code - General requirements for power boats | |
| Small pleasure boats code - General requirements for yachts | |
| Small pleasure boats code - Reinforced plastics construction | |
| Soft lead sheet and strip | |
| Specification for concrete interlocking roofing tiles (with weatheringcheck) | |
| Specification for premoulded reinforced plastics swimming pools | |
| Speroidal or nodular graphite iron castings | |
| Stainless steel sinks (with and without drainers) | |
| Standard for development - Pesticides for agricultural use, Part 10D: Atrazine, simazine, propazine, prometryn, methoprotryn, ametryn and tertbutryn | |
| Standard for development - Pesticides for agricultural use, Part 11D: Chlorfenvinphos | |
| Standard for development - Pesticides for agricultural use, Part 12D: Trifluralin | |
| Standard for development - Pesticides for agricultural use, Part 13D: Dichlofluanid | |
| Standard for development - Pesticides for agricultural use, Part 14D: Dodine | |
| Standard for development - Pesticides for agricultural use, Part 15D: Chlorpropham and propham | |
| Standard for development - Pesticides for agricultural use, Part 16D: Dimefox and schradan | |
| Standard for development - Pesticides for agricultural use, Part 17D: Fenitrothion | |
| Standard for development - Pesticides for agricultural use, Part 1D: DDT-Dichlorodiphenyl trichloroethane | |
| Standard for development - Pesticides for agricultural use, Part 2D: BHC and BHC-DDT | |
| Standard for development - Pesticides for agricultural use, Part 3D: Trichlorofon | |
| Standard for development - Pesticides for agricultural use, Part 4D: Azinphos-methyl and azinphos-ethyl | |
| Standard for development - Pesticides for agricultural use, Part 5D: Parathion | |
| Standard for development - Pesticides for agricultural use, Part 6D: Parathion-methyl | |
| Standard for development - Pesticides for agricultural use, Part 7D: Diazinon | |
| Standard for development - Pesticides for agricultural use, Part 8D: Demeton, demeton-S-methyl and thiometon | |
| Standard for development - Pesticides for agricultural use, Part 9D: Diquat and paraquat | |
| Steel sections and bars for boilers and unfired pressure vessels (otherthan bolting material) | |
| TERMINOLOGY FOR TITANIUM MICROSTRUCTURES | |
| Textile slings - Lifting slings for general purpose lifting operations made from fibre ropes - High modulus polyethylene (HMPE) (ISO 18264:2016 MOD) | |
| The selection of steel pipes for shipbuilding purposes | |
| The selection, care and use of industrial safety helmets | |
| Thermal Anti-Icing Equipment, Wing and Empennage | |
| Thermal freight containers (International sizes) | |
| Tin-lead and other tin-based solder alloys | |
| Toilet soap | |
| Trailing cables for mining purposes (including underground coal mines,metalliferous mines, open-cut mines, quarries and dredges | |
| Two-Speed Propeller Reduction Gear Control | |
| Vegetable parchment for wrapping dairy products | |
| Water type portable fire extinguishers - Water (gas container) type | |
| Water type portable fire extinguishers - Water (stored Pressure) type | |
| Webbing for restraining devices for occupants of motor vehicles | |
| Welded stainless steel tubes for plumbing applications | |
| Welded steel tubes for pressure purposes | |
| WHEEL AND AXLE DIMENSIONS, HIGH PRESSURE - STUB AXLE TYPE | |
| WHEEL AND AXLE DIMENSIONS, LOW - PROFILE - STUB AXLE TYPE | |
| WHEEL AND AXLE DIMENSIONS, LOW PROFILE - STRAIGHT AXLE TYPE | |
| WHEEL AND AXLE DIMENSIONS, TAIL WHEEL, HIGH PRESSURE - STRAIGHT AXLE TYPE | |
| WHEEL AND AXLE DIMENSIONS, TAIL WHEEL, HIGH PRESSURE - STUB AXLE TYPE | |
| WIRE, RETAINER - TUBE COUPLING NUT | |
| Wire, Retainer Tube Coupling Nut | |
| Wrought aluminium and aluminium alloy drawn tubes for generalengineering purposes | |
| Wrought aluminium and aluminium alloy drawn wire, rod, bar and strip forgeneral engineering purposes | |
| Wrought aluminium and aluminium alloy extruded rod, bar, solid andhollow shapes for general engineering purposes | |
| Zinc alloy ingots (for pressure diecasting) and zinc alloy pressure diecastings |
| << Prev | Next >> |