Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
233
234
235
236
237
238
239
240
241
242
243
244
245
250
260
270
280
290
300
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) Assembly and Soldering Criteria for High Quality/High Reliability Soldering Wire and Cable Termination in Aerospace Vehicles | |
| (R) Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification | |
| (R) FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN, TO FLARED TUBE | |
| (R) FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE | |
| (R) Fittings, Tube, Fluid System 3000 psig (21 000 kPa) Rated Pressure, Externally Swaged, Specification For | |
| (R) Fittings, Weld to Beam, Seal, Fluid Connection | |
| (R) Fittings, Weld, Fluid Connection, 5000 psi Maximum | |
| (R) Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification (Supplement 1) | |
| (R) Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification | |
| (R) Hose Assembly, 3000 psi, Polytetrafluoroethyl ene, Metallic Reinforced, 400 Degrees F, Heavy Duty, Aircraft Hydraulic Systems | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 45 Degree to 45 Degree | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 45 Degree to 90 Degree | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 90 Degree to 90 Degree | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, Straight to 45 Degree | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, Straight to 90 Degree | |
| (R) Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, Straight to Straight | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 45 Degree to 45 Degree | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 45 Degree to 90 Degree | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, 90 Degree to 90 Degree | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to 45 Degree Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to 90 Degree Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to Straight Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to Straight Male | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to 45 Degree | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to 90 Degree | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to Straight | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, 45 Degree to 45 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, 45 Degree to 90 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to 45 Degrees | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to 90 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to Straight | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 45 Degree to 45 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 45 Degree to 90 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 90 Degree to 90 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 45 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 90 Degree | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to Straight | |
| (R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi,275 Degrees F, Titanium Fittings, Beam Seal, 90 Degree to 90 Degree | |
| (R) Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 \xb0F, Procurement Specification | |
| (R) Safety Cable Kit Procurement Specification and Requirement for Use | |
| (R) Survivor Locator Lights | |
| 1/4" Bore Sediment Valve | |
| 120\xba Countersunk Head Bolt | |
| 70% isopropyl alcohol impregnated swabs - Sterile | |
| Above ground burial structures | |
| Abrasive products - Checking the grit size of superabrasives | |
| AMENDMENT RECORD No. AS44750-AR for Drawing Standard No. AS44750-753 | |
| Analysis of soil, Part 1: Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis | |
| Analysis of soils, Part 2: Extraction of heavy metals and metalloids from soil by aqua regia - Hotplate digestion method | |
| Analysis of soils, Part 3: Determination of metals in aqua regia extracts of soil by flam atomic absorption spectrometry | |
| Analysis of soils, Part 4: Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry | |
| Assembly - Union Nut, 3/8" DIA. Pipe | |
| Assembly and Soldering Criteria for High Quality/High Reliability Soldered Wire and Cable Termination in Aerospace Vehicles | |
| Assembly and Soldering Criteria for High Quality/High Reliability Soldering Wire and Cable Termination in Aerospace Vehicles | |
| Assembly of Thermal Relief Valve (Test Schedule see Sheet 2) | |
| Australian Standard for Construction of Premises Processing Animals for Human Consumption | |
| Australian Standard for Hygienic Production of Meat for Human Consumption | |
| Australian Standard for Transportation of Meat for Human Consumption | |
| Automatic fee collection - Interface specification for clearing between operators | |
| Automotive repairs - Code of practice for reconditioning reciprocating compression ignition engines | |
| Balance Weights, Clamped-on Type, for large Diameter Applications | |
| Balance Weights, Clamped-on Type | |
| Balance Weights, Washer Type | |
| Ballast Weight. 10LB | |
| Ballast Weight. 17.5LB | |
| Blanks for superabrasive cutting-off wheels - Hand-held cutting-off in building and civil engineering | |
| Blanks for superabrasive cutting-off wheels - Manually guided cutting-off in building and civil engineering | |
| Body Assembly (called for on AS4585) | |
| Bolt - \x93Phillips\x94 Mushroom Head | |
| Bolt - \x93Phillips\x94 Round Head | |
| Bolt Block | |
| Bolt, 90 Degree Countersunk Head, Aluminium Alloy | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A Heat Resisting Alloy, Nimonic 80A to BS HR 601, Silver Coated Thread only, Classification Rm = 1000 MPa (145,000 lbf/in\xb2) Ambient... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .3125-24 UNJF-3A Heat Resisting Alloy, Nimonic 80A to BS HR 601, Silver Coated Thread only, Classification Rm = 1000 MPa (145,000 lbf/in\xb2) Ambient... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24 UNJF-3A Heat Resisting Alloy, Nimonic 80A to BS HR 601, Silver Coated Thread only, Classification Rm = 1000 MPa (145,000 lbf/in\xb2) Ambient... | |
| Bolt, Machine - Hexagon Head, .190-32 (Balance Weight) | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR601 Silver Coated, .3125-24 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR601 Silver Coated, .375-24 UNJF-3A.BS4084 | |
| Bolt, Mushroom Head, Aluminium Alloy | |
| Bolt, Raised 90 Degree Countersunk Head, Aluminium Alloy | |
| Bolt, Round Head, Aluminium Alloy | |
| Bolts and Screws, Steel, Corrosion and Heat Resistant Precipitation Heat Treated Before Roll Threaded 160 000 psi Minimum Tensile Strength | |
| Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification | |
| Bolts, 2BA Hexagon, Close Tolerance | |
| Bonded abrasive products - Dimensions - Grinding wheels for centreless external cylindrical grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on hand held power tools | |
| Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on stationary or mobile cutting-off machines | |
| Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a vertical grinder | |
| Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging on an angle grinder | |
| Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging | |
| Bonded abrasive products - Dimensions - Grinding wheels for external cylindrical grinding between centres | |
| Bonded abrasive products - Dimensions - Grinding wheels for high-pressure grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for internal cylindrical grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for manually guided grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/face grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/peripheral grinding | |
| Bonded abrasive products - Dimensions - Grinding wheels for tool and tool room grinding | |
| Bonded abrasive products - Dimensions - Hand finishing sticks | |
| Bonded abrasive products - Dimensions - Stones for honing and superfinishings | |
| Bonded abrasive products - Dimensions, Part 12: Grinding wheels for deburring and fettling on a straight grinder | |
| Bonded abrasive products - General requirements | |
| Bush for 3/8" DIA. Pipe Union Nut | |
| Channel (for Self Bonding Pipe Clamp) | |
| Circlips | |
| Clamp, Balance Weight | |
| Clamps, Balance Weight, for large Diameter Applications | |
| Clip with Earthing Tongue | |
| Clip | |
| Coated abrasives - Abrasive belts - Selection of width/length combinations | |
| Coated abrasives - Flap wheels with incorporated flanges or separate flanges | |
| Coated abrasives - Flap wheels with shaft | |
| Coated abrasives - Plain sheets | |
| Collar, Aluminium Alloy, Anodised, Metric | |
| Commercial catering gas equipment | |
| Compass, Magnetic, Non-Stabilized Type (for Turbine-Powered, Subsonic Aircraft) | |
| Composts, soil conditioners and mulches | |
| Condensed aerosol fire extinguishing systems - Requirements for system design, installation and commissioning and test methods for components | |
| Consumer television interfaces, Part 1: PAL RF | |
| Consumer television interfaces, Part 2: Analogue baseband | |
| Control Knob for Emergency Oxygen | |
| Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot | |
| Copper, lead and zinc sulfide concentrates - Precision and bias of mass measurement techniques | |
| Decorative gas log and other fuel effect appliances | |
| Digital television - Terrestrial broadcasting - Characteristics of digital terrestrial television transmissions | |
| Digital television \x97 Terrestrial broadcasting \x97 Characteristics of digital terrestrial television transmissions | |
| Domestic gas cooking appliances | |
| Domestic outdoor gas barbecues | |
| Earth-moving machinery - Off-highway rims and wheels - Maintenance and repair | |
| Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair, Part 1: Wheel assemblies and rim assemblies | |
| Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair, Part 2: Tyres | |
| Elastomeric Blind Grommets (Various) | |
| Elastomeric Grommets (Various), for Aeronautical Purposes | |
| Elbow, 45 Degree, Beam Seal, Male 4000 psi, Hydraulic | |
| ELBOW, 45\xb0, BEAM SEAL, MALE, 4000 PSI, HYDRAULIC | |
| Elbow, 90 Degree, Beam Seal, Male 4000 psi, Hydraulic | |
| End Plate for Stirrup (Rudder Bar) | |
| Essential oils - Sampling | |
| Evaluation of devices and additives which claim to improve vehicle performance - Engines designed for leaded petrol to operate on unleaded petrol | |
| Evaluation of devices, additives and processes which claim to improve vehicle performance, Part 2: Spark ignition engine system | |
| Fire detection and alarm systems, Part 16: Emergency warning control and indicating equipment | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment - Air-handling fire mode control panel | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment - Alarm investigation | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment - Alarm signalling equipment | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment - Fire brigade panel | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment - Requirements for wire-free alarm zone circuits | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 0: General requirements and test methods | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 1: Fire | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 4: Intercommunication systems for emergency purposes | |
| Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 5: Power supply units | |
| Fire detection, warning, control and intercom systems \x97 Control and indicating equipment Part 17: 003 key \x97 Fire services key system | |
| Fire resistant and antistatic requirements for conveyor belting used in underground coal mines | |
| Fishing line - Determination of breaking load | |
| FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN TO FLARED TUBE | |
| FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN, TO FLARED TUBE | |
| FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE | |
| FITTING END, FLARELESS, BLUNT NOSE, DESIGN STANDARD | |
| Fitting, 24 Degree Cone Flareless to 37 Degree Flared, Fluid Connection | |
| Fitting, 24\xb0 Cone Flareless to 37\xb0 Flared, Fluid Connection | |
| Fittings, 24 Degree Cone Flareless, Fluid Connection, 5000 psi | |
| Fittings, 24\xb0 Cone Flareless, Fluid Connection, 5000 psi | |
| Fittings, Tube, Fluid System (3000/4000 psig Rated Pressure), Externally Swaged, Specification for | |
| Fittings, Tube, Fluid System, 3000 psig Maximum, Permanently Attached, Specification for | |
| Fittings, Weld to 24 Degrees Cone Flareless, Fluid Connection | |
| Fittings, Weld to 24\xb0 Cone Flareless, Fluid Connection | |
| Fittings, Weld to Beam Seal, Fluid Connection | |
| Fittings, Weld, Fluid Connection, 5000 psi | |
| Flashback arresters - Safety devices for use with fuel gases and oxygen or compressed air | |
| Flexible Strip (for Cable Fastening) | |
| Flue cowls - Gas appliances | |
| Flush Water / Sediment Drain Valve | |
| Gas appliances - Quality of servicing | |
| Gas fired water heaters for hot water supply and/or central heating | |
| Gas laundry dryers | |
| Gas pool heaters | |
| Gas space heating appliances | |
| Generator Mounting Pad and Drive, 4 Bolt | |
| GENERATOR, MOUNTING PAD AND DRIVE | |
| Guards and patrols | |
| Guide for the selection of insulators in respect of polluted conditions | |
| Guide to sampling of alumina, Part 2: Preparation of samples | |
| Guide to the sampling and investigation of potentially contaminated soil - Non-volatile and semi-volatile compounds | |
| Guide to the sampling and investigation of potentially contaminated soil, Part 2: Volatile substances | |
| Guide to the sampling of alumina, Part 1: Sampling procedures | |
| Guide to the sampling of particulate materials - Checking for bias | |
| Guide to the sampling of particulate materials - Estimating sampling precision | |
| Guide to the sampling of particulate materials - Inspection of mechanical sampling systems | |
| Guide to the sampling of particulate materials - Preparation of samples | |
| Guide to the sampling of particulate materials - Sampling of slurries | |
| Guide to the sampling of particulate materials - Sampling procedures | |
| Guidelines for scaffolding | |
| High visibility safety garments, Part 1: Garments for high risk applications | |
| Hood Jettison Release Handle | |
| Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification (Supplement 1) | |
| HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION | |
| Hose Assembly, 3000 psi, Polytetrafluoroethyl ene, Metallic Reinforced, 400 \xb0F, Heavy Duty, Aircraft Hydraulic Systems | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure Flared, Straight to Straight, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure, Flared, 45 Degree to 45 Degree, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure, Flared, 45 Degree to 90 Degree, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure, Flared, 90 Degree to 90 Degree, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure, Flared, Straight to 45 Degree, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Conductive, Medium Pressure, Flared, Straight to 90 Degree, AS620 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 45 Degree to 45 Degree | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 45 Degree to 90 Degree | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 45 Degrees to 90 Degrees | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45\xb0 TO 90\xb0 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, 90 Degree to 90 Degree | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 90\xb0 TO 90\xb0 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, Straight to 45 Degree | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO 45\xb0 | |
| Hose Assembly, Convoluted, Polytetrafluoroethyl ene, Metallic Reinforced Conductive, Flared, Straight to 90 Degree | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYL ENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 45\xb0 FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 90\xb0 FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced Heavy- Duty, 400 Degrees F, 3000 psi, Aircraft Hydraulic Systems | |
| Hose Assembly, PTFE, Aramid Reinforced Standard Duty, 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to Straight | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 90 Degree | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 45 Degree to 90 Degree | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 45 Degrees to 45 Degrees | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 90 Degree to 90 Degree | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 4000/3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 45 Degree | |
| Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 4000/3000 psi,275 Degrees F, Titanium Fittings, Beam Seal, 90 Degree to 90 Degree | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 45\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 3000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, STRAIGHT TO STRAIGHT | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 45\xb0 TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 45\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, BEAM SEAL, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 \xb0F, TITANIUM FITTINGS, FLARELESS, STRAIGHT TO STRAIGHT | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, 45 Degree T0 90 Degree | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, 45 Degree to 90 Degree | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, 90 Degree to 90 Degreee | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, Straight to 90 Degree | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 DegreeS F, Titanium Fittings, Beam Seal, 90 Degrees TO 90 Degrees | |
| Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degrees F, Titanium Fittings, Flareless, 45 Degree to 45 Degreee | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, 45 Degree to 45 Degree | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, 45 Degree to 90 Degree | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, 90 Degree to 90 Degree | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight Male to 45 Degree Female | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight Male to 90 Degree Female | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight Male to Straight Female | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight Male to Straight Male | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight to 45 Degree | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight to 90 Degree | |
| Hose Assembly, Silicone Lined, 125 psi, Flareless, Potable Water, Straight to Straight | |
| Hose, Air Duct, Flexible, Silicone-Coated Fabric, 1 to -.5 psi, External Nylon Helix, Self- Extinguishing | |
| Hygienic production of crocodile meat for human consumption | |
| Hygienic production of poultry meat for human consumption | |
| Hygienic production of rabbit meat for human consumption | |
| Hygienic production of wild game meat for human consumption | |
| Indirect gas-fired ducted air heaters | |
| Industrial, medical and refrigerant compressed gas cylinder identification | |
| Information technology - Public Key Authentication Framework (PKAF) related Standards, Part 1.1: General - PKAF architecture | |
| Information technology - Public Key Authentication Framework (PKAF) related Standards, Part 1.2.3: General - PICS Proforma for Certificate Revocation Lists (CRL) | |
| Information technology - Public Key Authentication Framework (PKAF), Part 1.2.1: General - X.509 Certificate and Certificate Revocation Lists (CRL) profile | |
| Information technology - Public Key Authentication Framework (PKAF), Part 1.2.2: General - PICS Proforma for digital signature certificates | |
| Information technology - Public Key Authentication Framework (PKAF), Part 1.3: General - X.509 supported algorithms profile | |
| Information technology - Public Key Authentication Framework (PKAF), Part 2.1: Assurance framework - Certification Authorities | |
| Installation of nailplated timber trusses | |
| Installation of roof slates and shingles (Non-interlocking type) | |
| Insulators - Composite for overhead lines - Voltages greater than 1000 V a.c., Part 1: Definitions, test methods and acceptance criteria for string insulator units | |
| Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c., Part 4: Definitions, test methods and acceptance criteria for post insulator units | |
| Interchange of client information, Part 1: Data elements and interchange formats | |
| Interchange of client information | |
| Internal combustion engines - Performance, Part 0: Application | |
| Internal combustion engines - Performance, Part 10: Engines for agricultural tractor and machine use - Test code, net power | |
| Internal combustion engines - Performance, Part 11: Engines for motorcycle use - Test code, net power | |
| Internal combustion engines - Performance, Part 1: Standard reference conditions, declarations of power, fuel and lubricating oil consumptions, and test methods | |
| Internal combustion engines - Performance, Part 3: Engines for land, rail-traction and marine use - Test measurements | |
| Internal combustion engines - Performance, Part 4: Engines for land, rail-traction and marine use - Speed governing | |
| Internal combustion engines - Performance, Part 5: Engine for land, rail-traction and marine use - Torsional vibrations | |
| Internal combustion engines - Performance, Part 6: Engines for land, rail-traction and marine use - Overspeed protection | |
| Internal combustion engines - Performance, Part 7: Engines for land, rail-traction and marine use - Codes for engine power | |
| Internal combustion engines - Performance, Part 8: Engines for road vehicle use - Test code, net power | |
| Internal combustion engines - Performance, Part 9: Engines for road vehicle use - Test code, gross power | |
| Internal combustion engines - Vocabulary of components and systems, Part 1: Structure and external covers | |
| Internal combustion engines - Vocabulary of components and systems, Part 2: Main running gear | |
| Internal combustion engines - Vocabulary of components and systems, Part 3: Valves, camshaft drive and actuating mechanisms | |
| Internal combustion engines - Vocabulary of components and systems, Part 4: Pressure charging and air/exhaust gas ducting systems | |
| Internal combustion engines - Vocabulary of components and systems, Part 5: Cooling systems | |
| Internal combustion engines - Vocabulary of components and systems, Part 6: Lubricating systems | |
| Internal combustion engines - Vocabulary of components and systems, Part 7: Governing systems | |
| Internal combustion engines - Vocabulary of components and systems, Part 8: Starting systems | |
| Internal combustion engines - Vocabulary of components and systems, Part 9: Control and monitoring systems | |
| Knob for Cockpit Heating Control | |
| Lubricating Nipples, Hydraulic Surface-Check Type, Metric | |
| Manufacture of nailplate-joined timber products | |
| Metal finishing - Thermoset powder coatings | |
| Methods of sampling and testing ceramic tiles, Method 10: Determination of moisture expansion | |
| Methods of sampling and testing ceramic tiles, Method 12: Determination of frost resistance | |
| Methods of sampling and testing ceramic tiles, Method 13: Determination of chemical resistance | |
| Methods of sampling and testing ceramic tiles, Method 14: Determination of resistance to stains | |
| Methods of sampling and testing ceramic tiles, Method 15: Determination of lead and cadmium given off by glazed tiles | |
| Methods of sampling and testing ceramic tiles, Method 16: Determination of small colour differences (ISO 10545-16:1999 MOD) | |
| Methods of sampling and testing ceramic tiles, Method 1: Sampling and basis for acceptance | |
| Methods of sampling and testing ceramic tiles, Method 2: Determination of dimensions and surface quality | |
| Methods of sampling and testing ceramic tiles, Method 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density | |
| Methods of sampling and testing ceramic tiles, Method 5: Determination of impact resistance by measurement of coefficient of restitution | |
| Methods of sampling and testing ceramic tiles, Method 6: Determination of resistance to deep abrasion for unglazed tiles | |
| Methods of sampling and testing ceramic tiles, Method 7: Determination of resistance to surface abrasion for glazed tiles | |
| Methods of sampling and testing ceramic tiles, Part 11: Determination of crazing resistance for glazed tiles | |
| Methods of sampling and testing ceramic tiles, Part 1: Determination of modulus of rupture and breaking strength | |
| Methods of sampling and testing ceramic tiles, Part 8: Determination of linear thermal expansion | |
| Methods of sampling and testing ceramic tiles, Part 9: Determination of resistance to thermal shock | |
| Methods of test and rating requirements for smoke-spill fans | |
| Methods of tests for limes and limestones, Method 3.1: Slaking - Dewar flask | |
| Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products | |
| Non-destructive testing - Eddy current testing for the detection of surface flaws - In non-ferromagnetic metallic products | |
| Nut, Self Locking, Shank, Flange Restrained | |
| NUT, SELF-LOCKING, SHANK, FLANGE RESTRAINED (CR STEEL, SILVER COATED ALL OVER) | |
| Nut, Self-Locking, Spline Drive, BS HR650 (AMS 5737 or 5732) | |
| Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated, 1400 Degree F (760 Degree C), Procurement Specification | |
| Nylon Retaining Ring | |
| Oriented PVC (OPVC) pipes for pressure applications | |
| Oxygen Mask Assembly, Demand and Pressure Breathing, Crew | |
| Packing Plates for Nylon Retaining Rings - Double Anchor Nuts | |
| Packing Plates for Nylon Retaining Rings - Single Anchor Nuts | |
| Packing Plates for Steel Retaining Rings - Double Anchor Nuts | |
| Packing Plates for Steel Retaining Rings - Single Anchor Nuts | |
| Packing Washer | |
| Particle size analysis, Part 1: Photon correlation spectroscopy | |
| Phased implementation of AS/NZS ISO 9001:1994 or AS/NZS ISO 9002:1994 | |
| Pin, Shear, Headed, Close Tolerance, Metric | |
| Pin, Shoulder, Headless | |
| Pipe Clamp Block (.272\x94 DIA) | |
| Pipe Clamp Block (3/8\x94 DIA) | |
| Pipe Clamp Block (5/16\x94 DIA) | |
| Pipe Clamp Block (5/8\x94 DIA) | |
| Pipe Clamp Block (\xbd\x94 DIA) | |
| Pipe Clamp Block (\xbe\x94 DIA) | |
| Pipe Clamp Block, (\xbc\x94 DIA) | |
| Pipe Clamp Stud | |
| Pivot Plate - Extension to Seat Well | |
| Plain Washers (Precision) | |
| Plastic Disposable Cartridge, Plunger, Nozzles and Cartridge Assembly | |
| Playground surfacing - Specifications, requirements and test method | |
| Plunger (for Thermal Relief Valve) | |
| Preparation of a safety and operating plan for gas networks | |
| Pressure equipment - Manufacture | |
| Protection Cap for Propeller Shaft | |
| Radiant gas heaters for outdoor and non-residential indoor use | |
| Reference guide to Standards for passive electronic components | |
| Reference guide to Standards for semiconductor devices | |
| RETAINING CORD ASSEMBLY (NOMEX) | |
| Retaining Rings | |
| Rivet, Countersunk 90\xb0 | |
| Rivet, Snap Head | |
| Roundslings - Synthetic fibre - Care and use | |
| Roundslings - Synthetic fibre - Product specification | |
| Roundslings - Synthetic Fibre | |
| Safe working on new lift installations in new constructions | |
| SAFETY CABLE KIT PROCUREMENT SPECIFICATION AND REQUIREMENT FOR USE | |
| Safety Cable Kit Procurement Specification and Requirements for Use | |
| Seal (called for on AS4585) | |
| Security for health care facilities - General requirements, Part 1: 1 | |
| Security for health care facilities - Procedures guide | |
| Shim (for Thermal Relief Valve) | |
| Sleeve, Bite Type, 24 Degree Cone Flareless Fitting | |
| Sleeve, Bite Type, 24\xb0 Cone Flareless Fitting | |
| Slip resistance classification of new pedestrian surface materials | |
| Small craft - Steering systems - Wire rope and pulley systems for sailing craft | |
| Small craft - Steering systems, Part 2: Remote push-pull cable systems | |
| Small craft - Steering systems, Part 3: Remote systems for single outboard motors of 15 kW to 40 kW power | |
| Small craft - Steering systems, Part 4: Hydraulic steering systems for craft up to 24 m hull length | |
| Soils for landscaping and garden use | |
| Spark Igniter Gasket-Flange | |
| Specification for general purpose natural gas | |
| Split Reinforcing Ring used on Filler Cap AS2398 | |
| Split Reinforcing Ring used on Filler Cap AS2510 | |
| Spring - 1/4" Bore Drain Valve | |
| Spring for Valve | |
| Stand-alone power systems - Installation and maintenance | |
| Stand-alone power systems - Safety requirements | |
| Stand-alone power systems - System design guidelines | |
| Standardization, Hydraulic Tube Walls | |
| STARTER, MOUNTING PADS AND DRIVES - TYPES I, II, III & IV | |
| Steel Retaining Ring | |
| Steel tubes - Pressure application - Flash butt welding | |
| Stirrup (Rudder Bar) | |
| Stud for Cable Fastening | |
| Stud, Locked In, Ring Locked, Serrated, General Specification For | |
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature | |
| Supervisory control and data acquisition (SCADA) - Generic telecommunications and interface protocol - Fire alarm systems | |
| Supervisory control and data acquisition (SCADA) - Generic telecommunications interface and protocol, Part 1: General | |
| Support Clips, Rubber covered with Earthing Tongue | |
| Survivor Locator Lights | |
| Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus | |
| Test methods for limes and limestones, Method 1.1: Sample preparation - Quicklime and hydrated lime | |
| Test methods for limes and limestones, Method 10.1: Bulk density - Quicklime and hydrated lime | |
| Test methods for limes and limestones, Method 2.1: Fineness - Wet sieving | |
| Test methods for limes and limestones, Method 4.1: Soundness - Pat | |
| Test methods for limes and limestones, Method 4.2: Soundness - Le Chatelier | |
| Test methods for limes and limestones, Method 4.3: Soundness - Autoclave | |
| Test methods for limes and limestones, Method 5.1: Chemical composition - Quicklime and hydrated lime | |
| Test methods for limes and limestones, Method 6.1: Lime index - Available lime | |
| Test methods for limes and limestones, Method 7.1: Loss on ignition - Quicklime, hydrated lime and limestone | |
| Test methods for limes and limestones, Method 8.1: Free moisture - Convection oven | |
| Test methods for limes and limestones, Method 9.1: Solid content Convection - oven | |
| Test methods for limes and limestones, Part 0: General introduction and list of methods | |
| Textiles for health care facilities and institutions - Medical sheepskins, Part 1: Product specification and testing | |
| The storage and handling of toxic substances | |
| Thermal insulation of pipework, ductwork and equipment - Selection, installation and finish | |
| Thermal resistance of insulation for ductwork used in building airconditioning | |
| Tubular Assemblies, Fusion Welded, Inspection Processes and Acceptance Standards For | |
| Twin wall metal flues - Gas appliances | |
| Typical Assembly of Retained Bolts - Double Anchor Nuts | |
| Union Nut 3/8" O/D Pipe | |
| Vacuum Flask Stowage, 1 Unit | |
| Vacuum Flask Stowage, 2 Unit | |
| Valve (called for on AS4585) | |
| Valve Body (for Thermal Relief Valve) | |
| Valve Cap (for Thermal Relief Valve) | |
| Washer for 3/8" DIA. Pipe Union Nut | |
| Washer Plate - Port Side | |
| Washer Plate - Starboard Side | |
| Washer Plate | |
| Washer, Double Key - Unified Hexagon | |
| Washer, Spring Tension, Metric | |
| WASHER, TAB, DOUBLE KEY (FOR UNIFIED HEXAGONS) | |
| Wastes, sediments and contaminated soils, Part 1: Preparation of leachates - Preliminary assessment | |
| Wastes, sediments and contaminated soils, Part 2: Preparation of leachates - Zero headspace procedure | |
| Wastes, sediments and contaminated soils, Part 3: Preparation of leachates - Bottle leaching procedures | |
| Water mist fire protection systems - System design, installation and commissioning | |
| Windows - Methods of test - Air infiltration test | |
| Windows - Methods of test - Deflection test | |
| Windows - Methods of test - Operating force test | |
| Windows - Methods of test - Test sample, preparation for tests, and test sequence | |
| Windows - Methods of test - Ultimate strength test | |
| Windows - Methods of test - Water penetration resistance test | |
| Windows - Methods of test, Part 0: General introduction and list of methods | |
| Wire Locking Tabs | |
| Wire Thread Inserts (BA, BSF & BSW) Unplated | |
| Wire Thread Inserts (BSPF) Unplated | |
| Wire, Locking - Corrosion Resisting Steel for temperatures up to 600\xb0C |
| << Prev | Next >> |