Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
232
233
234
235
236
237
238
239
240
241
242
243
244
250
260
270
280
290
300
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) ADAPTER ASSEMBLY, RETAINED NUT TO BOSS | |
| (R) CAP ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING | |
| (R) COUPLING, TUBE | |
| (R) ELBOW ASSEMBLY 45\xb0, FLARED TUBE TO ADJUSTABLE END, FOR SEAL RING | |
| (R) ELBOW ASSEMBLY 45\xb0, FLARED TUBE TO RETAINED NUT, FOR SEAL RING | |
| (R) ELBOW ASSEMBLY 90\xb0, FLARED TUBE TO ADJUSTABLE END, FOR SEAL RING | |
| (R) ELBOW ASSEMBLY 90\xb0, FLARED TUBE TO RETAINED NUT, FOR SEAL RING | |
| (R) Fire Testing of Fluid Handling Components for Aircraft Engines and Aircraft Engine Installations | |
| (R) FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| (R) FITTING ASSEMBLY, CAP, FLARELESS, PROTECTIVE CLOSURE, LOW PRESSURE | |
| (R) FITTING ASSEMBLY, ELBOW 45\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| (R) FITTING ASSEMBLY, ELBOW 90\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| (R) FITTING ASSEMBLY, ELBOW 90\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE | |
| (R) FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE | |
| (R) FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD | |
| (R) FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD | |
| (R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD | |
| (R) FITTING END, FLARELESS, DESIGN STANDARD | |
| (R) FITTING, ADAPTER, CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING | |
| (R) FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING | |
| (R) FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING | |
| (R) FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING | |
| (R) FITTING, FLARED TUBE, EXTERNAL STRAIGHT THREAD FOR SEAL RING | |
| (R) FITTING, NIPPLE, FLARED TUBE TO PIPE THREAD, FOR SEAL RING | |
| (R) FITTING, REDUCER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING | |
| (R) FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING | |
| (R) Handles and Attachments for Hand Socket Wrenches | |
| (R) NUT, COUPLING | |
| (R) Nut, Fitting, Retained | |
| (R) NUT, RETAINED, FOR FLARED TUBE FITTINGS | |
| (R) PLUG, HEX HEAD | |
| (R) TEE ASSEMBLY, FLARED TUBE, ADJUSTABLE END ON RUN, FOR SEAL RING | |
| (R) TEE ASSEMBLY, FLARED TUBE, ADJUSTABLE END ON SIDE, FOR SEAL RING | |
| (R) TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON RUN, FOR SEAL RING | |
| (R) TEE ASSEMBLY, FLARED TUBE, RETAINED NUT ON SIDE, FOR SEAL RING | |
| (R) Test Methods for Insulated Electric Wire | |
| (R) UNION ASSEMBLY, ADJUSTABLE END | |
| (R) WASHER, FLARED TUBE FITTING ADJUSTABLE END, DEFINITION AND INSTALLATION | |
| A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) | |
| A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear | |
| Adaptable housing | |
| Adapter Assembly, Retained Nut to Boss | |
| Adapter, Flared Tube .375 Bulkhead to Boss, for Seal Ring | |
| Adapter, Flared Tube to Boss, for Seal Ring | |
| Aircraft Ground Air Conditioning Service Connection | |
| AMPS receiver immunity to interfering signals employing amplitude modulation | |
| Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz | |
| Ancillary devices for expired air resuscitation | |
| Atmospheric corrosivity zones in Australia | |
| Automatic Pilots (Turbine Powered Subsonic Aircraft) | |
| BANK AND PITCH INSTRUMENTS | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of biochemical oxygen demand (closed bottle test) | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of dissolved organic carbon (DOC) | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of released carbon dioxide | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by oxygen demand in a closed respirometer | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by semi-continuous activated sludge method (SCAS) | |
| Biodegradability - Organic compounds in an aqueous medium - Determination by static test (Zahn-Wellens method) | |
| Biodegradability - Organic compounds in an aqueous medium - Guidance for the determination of biodegradability of poorly soluble organic compounds | |
| Biodegradability - Organic compounds in an aqueous medium, Part 1: Method for determining and reporting biodegradability | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .190-32 UNJF-3A Heat Resisting Alloy Steel to BS HR 650, Silver Coated Thread only, Classification Rm = 900 MPa (130,000 lbf/in\xb2) Ambient Temperature... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .190-32 UNJF-3A Heat Resisting Alloy Steel to BS S 159, Silver Coated Thread only, Classification Rm 1100 MPa (160,000 lbf/in\xb2) Ambient Temperature up... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .190-32 UNJF-3A Heat Resisting Alloy, Nimonic\xae 80A to BS HR 601, Silver Coated Thread only, Classification Rm = 1000 MPa (145,000 lbf/in\xb2) Ambient... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A Heat Resisting Alloy Steel to BS HR 650, Silver Coated Thread only, Classification Rm = 900 MPa (130,000 lbf/in\xb2) Ambient Temperature... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A Heat Resisting Alloy Steel to BS S 159, Silver Coated Thread only, Classification Rm 1100 MPa (160,000 lbf/in\xb2) Ambient Temperature up... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .3125-24 UNJF-3A Heat Resisting Alloy Steel to BS HR 650, Silver Coated Thread only, Classification Rm = 900 MPa (130,000 lbf/in\xb2) Ambient Temperature... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .3125-24 UNJF-3A Heat Resisting Alloy Steel to BS S 159, Silver Coated Thread only, Classification Rm = 1100 MPa (160,000 lbf/in\xb2) Ambient Temperature... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24 UNJF-3A Heat Resisting Alloy Steel to BS HR 650, Silver Coated Thread only, Classification Rm = 900 MPa (130,000 lbf/in\xb2) Ambient Temperature... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24 UNJF-3A Heat Resisting Alloy Steel to BS S 159, Silver Coated Thread only, Classification Rm = 1100 MPa (160,000 lbf/in\xb2) Ambient Temperature... | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR601 Silver Coated, .250-28 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR601 Silver Coated, 10(.190)-32 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR650 Silver Coated, .3125-24 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR650 Silver Coated, .375-24 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR650, Silver Coated, .250-28 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS HR650, Silver Coated, 10(.190)-32 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS S159 Silver Coated, .250 - 28UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS S159 Silver Coated, .3125-24 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS S159 Silver Coated, .375-24 UNJF-3A.BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, BS S159 Silver Coated, 10 (.190)-32 UNJF-3A BS4084 | |
| Bulkhead Adaptor - Forged Blank (Aluminium Alloy). Swaged Pipe Coupling | |
| Bulkhead Adaptor - Forged Blank - Steel. Swaged Pipe Coupling | |
| Bulkhead Elbow - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Bulkhead Elbow - Forged Blank - Steel. Swaged Pipe Coupling | |
| Bulkhead Elbow 135\xb0- Forged Blank (Aluminium Alloy). Swaged Pipe Coupling | |
| Bulkhead Elbow 135\xb0- Forged Blank - Steel. Swaged Pipe Coupling | |
| Bulkhead Tee - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Bulkhead Tee - Forged Blank - Steel. Swaged Pipe Coupling | |
| Bulkhead Tee- Forged Blank - Steel. Swaged Pipe Coupling | |
| Bushing - Screw Thread Expander, for Seal Ring | |
| Bushing - Screw Thread Reducer, for Seal Ring | |
| Cabinetry in the built-in environment - Commercial and domestic | |
| Cap Assembly, Pressure Seal Flared Tube Fitting | |
| Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure | |
| Cap Assembly, Protective Closure, Flareless Fitting, Low Pressure | |
| Ceramic tableware | |
| Child use and care articles - Child seats for cycles - Safety requirements and test methods (EN 14344:2004, MOD) | |
| Coal and coke - Sampling - Determination of precision and bias | |
| Coal and coke - Sampling - Guide to the inspection of mechanical sampling systems | |
| Coal and coke - Sampling, Part 1: Higher rank coal - Sampling procedures | |
| Coal and coke - Sampling, Part 2: Coke - Sampling procedures | |
| Coal and coke - Sampling, Part 3: Lower rank coal - Sampling procedures | |
| Cold mix asphalt for maintenance patching | |
| Complaints handling | |
| Cone Blank (Steel) | |
| Cone Blank Assembly (Steel) | |
| Control of the obtrusive effects of outdoor lighting | |
| Coupling Assemblies, Non- Locking Probe Style, Self-Aligning, Self- Sealing Disconnects | |
| Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects | |
| Coupling, Tube | |
| Cross - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Cross - Forged Blank - Steel. Swaged Pipe Coupling | |
| Cross - Forged Blank-Steel. Swaged Pipe Coupling | |
| Cross-Equal Branches (Aluminium Alloy) | |
| Cross-Equal Branches (Steel) | |
| Cross-Reduced Branches (Aluminium Alloy) | |
| Cross-Reduced Branches (Steel) | |
| Dean and Stark apparatus | |
| Design and installation of Revolving doors | |
| Design, installation and use of pharmaceutical isolators | |
| DN 80 piston type vacuum interface valves for municipal sewer systems | |
| Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems | |
| Drawing Interpretation and Standard Machining Practices, Couplings, Fittings, and Hose Ends, Fluid Systems | |
| Ductwork for air-handling systems in buildings, Part 1: Flexible duct | |
| Ductwork for air-handling systems in buildings, Part 2: Rigid duct | |
| Ductwork for air-handling systems in buildings | |
| Elbow - 135\xb0 (Aluminium Alloy) | |
| Elbow - 135\xb0 (Steel) | |
| Elbow - 135\xb0 - Bulkhead (Aluminium Alloy) | |
| Elbow - 135\xb0 - Bulkhead (Steel) | |
| Elbow - 135\xb0, Nipple End, Female Nut Union (Steel) | |
| Elbow - 135\xb0- Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Elbow - 135\xb0- Forged Blank - Steel. Swaged Pipe Coupling | |
| Elbow - 90\xb0 (Aluminium Alloy) | |
| Elbow - 90\xb0 (Steel) | |
| Elbow - 90\xb0 - Bulkhead (Aluminium Alloy) | |
| Elbow - 90\xb0 - Bulkhead (Steel) | |
| Elbow - 90\xb0, Nipple End, Female Nut Union (Steel) | |
| Elbow - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Elbow - Forged Blank - Steel. Swaged Pipe Coupling | |
| Elbow Assembly - 135\xb0, Nipple End, Female Nut Union (Steel) | |
| Elbow Assembly - 90\xb0, Nipple End, Female Nut Union (Steel) | |
| Elbow Assembly 45 Degree, Flared Tube to Adjustable End, for Seal Ring | |
| Elbow Assembly 45 Degree, Flared Tube to Retained Nut, for Seal Ring | |
| Elbow Assembly 90 Degree, Flared Tube to Adjustable End, for Seal Ring | |
| Elbow Assembly 90 Degree, Flared Tube to Retained Nut, for Seal Ring | |
| Electroplated coatings of zinc on steel fasteners with imperial threads | |
| Expander, Adapter, Flared Tube to Boss, for Seal Ring | |
| Fire Testing of Fluid Handling Components for Aircraft Engines and Aircraft Engine Installations | |
| FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| FITTING ASSEMBLY, CAP, FLARELESS PROTECTIVE CLOSURE, LOW PRESSURE | |
| Fitting Assembly, Elbow 45 Degrees, Reducer and Nonreducer, Internal Flare to Flared Tube | |
| FITTING ASSEMBLY, ELBOW 45\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| Fitting Assembly, Elbow 90 Degrees, Reducer and Nonreducer, Internal Flare to Flared Tube | |
| Fitting Assembly, Elbow 90 Degrees, Reducer and Nonreducer, Internal Flare | |
| FITTING ASSEMBLY, ELBOW 90\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE | |
| FITTING ASSEMBLY, ELBOW 90\xb0, REDUCER AND NONREDUCER, INTERNAL FLARE | |
| FITTING ASSEMBLY, REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL 5000 PSI /8/ | |
| FITTING ASSEMBLY, REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL, 5000 PSI /8/ | |
| Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Run, to Flared Tube | |
| FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE | |
| Fitting End - Bulkhead Flared Tube Connection, Design Standard | |
| Fitting End - Flared Tube Connection, Design Standard | |
| Fitting End, Adjustable, Standard Dimensions for, Design Standard | |
| Fitting End, Bulkhead, Flared Tube Connection, Design Standard | |
| FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD | |
| FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD | |
| FITTING END, CONICAL DESIGN STANDARD | |
| Fitting End, Conical, Standard Dimensions for, Design Standard | |
| Fitting End, External Thread, Flareless Design Standard | |
| Fitting End, Flared Tube Connection, Design Standard | |
| FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD | |
| FITTING END, FLARELESS, DESIGN STANDARD | |
| Fitting End, Internal Flare, Single Angle, Standard Dimensions for, Design Standard | |
| Fitting End, Straight Thread, Standard Dimensions for, Design Standard | |
| FITTING, ADAPTER, CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING | |
| FITTING, ADAPTER, FLARED TUBE, .375 BULKHEAD TO BOSS FOR SEAL RING | |
| FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING | |
| FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING | |
| FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING | |
| FITTING, FLARED TUBE, EXTERNAL STRAIGHT THREAD FOR SEAL RING | |
| FITTING, NIPPLE, FLARED TUBE TO PIPE THREAD, FOR SEAL RING | |
| FITTING, REDUCER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING | |
| FITTING, TEE, FLARED TUBE, INTERNAL THREAD ON RUN, FOR SEAL RING | |
| FITTING, TEE, FLARED TUBE, INTERNAL THREAD ON SIDE, FOR SEAL RING | |
| FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING | |
| Form of formal instrument of agreement for design and construct contract - Forms (Supplement 1 to AS 4302-1995) | |
| Form of formal instrument of agreement for design and construct contract | |
| Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores | |
| Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings | |
| Gas-insulated metal-enclosed switchgear for rated voltages 72.5 kV and above - Requirements for switching of bus-charging currents by disconnectors | |
| Gasket | |
| General conditions of subcontract for design and construct | |
| General conditions of tendering and tender form for design and construct contract | |
| GOVERNOR, PROPELLER, MOUNTING PAD & DRIVE | |
| Guide to lead paint management - Industrial applications | |
| Guide to lead paint management, Part 2: Residential and commercial buildings | |
| Handles and Attachments for Hand Socket Wrenches | |
| Heavy mineral sand concentrates - Physical testing - Size analysis | |
| Heavy mineral sand concentrates - Physical testing, Part 2: Determination of heavy minerals and free quartz - Heavy liquid separation method | |
| Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Titaniferous mineral sands | |
| Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Zircon materials | |
| High efficiency particulate air (HEPA) filters - Classification, construction and performance | |
| High efficiency particulate air (HEPA) filters, Part 1: Performance and construction | |
| High efficiency particulate air (HEPA) filters, Part 2: Methods of test | |
| High-Voltage Alternating Current Circuit-Breakers - Inductive Load Switching | |
| High-voltage test techniques for low-voltage equipment, Part 1: Definitions, test and procedure requirements | |
| High-voltage test techniques for low-voltage equipment, Part 2: Test equipment | |
| Hole Contour, Fluid Passage, Tube Fitting | |
| Hose Assembly PTFE Heavy Duty, -65 To 400 \xb0F (-55 To 204 \xb0C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic | |
| Hose Assembly PTFE Heavy Duty, -65 to 400 Degrees F (-55 to 204 Degrees C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 40 TO 90\xb0 | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 45 TO 45\xb0 | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 90\xb0 TO 90\xb0 | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45\xb0 | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 90\xb0 | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 \xb0F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, 45 Degree to 45 Degree | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, 45 Degree to 90 Degree | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, 90 Degree to 90 Degree | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, Straight to 45 Degree | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45 DEGREES | |
| Hose Assembly, Polytetrafluoroethyl ene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, Straight to 90 Degree | |
| HOSE ASSEMBLY, POLYTETRAFLUOROETHYL ENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT | |
| Impulse Testing of Hydraulic Tubing and Fittings, S-N Curve | |
| Inspection of buildings - Timber pest inspections | |
| Inspection of buildings, Part 0: General requirements | |
| Inspection of buildings, Part 1: Property inspections - Residential buildings | |
| Inspection of buildings, Part 2: Group titled properties | |
| Insulating refractory ceramic fibres, Part 1: Bulk fibre and blankets | |
| Insulating refractory ceramic fibres, Part 2: Board | |
| Insulators - Ceramic or glass - Station post for indoor and outdoor use - Voltages greater than 1000 V a.c., Part 1: Characteristics | |
| Insulators - Ceramic or glass - Station post for indoor and outdoor use - Voltages greater than 1000 V a.c., Part 2: Tests | |
| Mach Meters (Turbine Powered Subsonic Aircraft) | |
| Mailboxes | |
| MAXIMUM-ALLOWABLE-AI RSPEED INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT) (STABILIZED TYPE) | |
| Maximum-Allowable-Ai rspeed Instruments (Turbine Powered Subsonic Aircraft) | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stress | |
| Mechanical properties of fasteners made of carbon steel and alloy steel, Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm... | |
| Mine plans - Preparation and symbols | |
| Minimum Performance Standards for Aerospace Electric Power Converters | |
| Mobile equipment for continuous handling of bulk materials - General requirements for the design of steel structures | |
| Nipple - Blanking, Long (Steel) | |
| Nipple - Flared Tube to Pipe Thread, for Seal Ring | |
| Nipple Blanking Assembly, Long (Aluminium Alloy) | |
| Nipple Blanking Assembly, Long (Steel) | |
| Nipple Blanking Assembly, Short (Aluminium Alloy) | |
| Nipple Blanking Assembly, Short (Steel) | |
| Nipple Swaged (Cres) | |
| Nipple, Swaged (Carbon Steel) | |
| Nipple-Blanking, Short (Steel) | |
| Nomenclature and Abbreviations for Use on the Flight Deck | |
| Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures | |
| Nut - Swivel, Wired on | |
| Nut - Thin (Aluminium Alloy) | |
| Nut Union - Female (Aluminium Alloy) | |
| Nut Union, Cone Blank (Steel) | |
| Nut Union-Male (Aluminium Alloy) | |
| Nut Union-Male (Steel) | |
| Nut Union-Thrust Wire - Female (Steel) | |
| Nut, Coupling | |
| NUT, FITTING, RETAINED | |
| NUT, PLAIN, ROUND | |
| Nut, Retained, for Flared Tube Fittings | |
| Nut, Self-Locking - Bi-Hexagon Waspaloy (Source Control Drawing) | |
| Nut, Self-Locking, UNS S66286, 1200 \xb0F, 160,000 psi, UNJ Thread | |
| Nut, Self-Locking, UNS S66286, 1200 Degrees F, 160 000 psi, UNJ Thread | |
| NUT, UNION-FEMALE, METRIC PIPE SERIES (Alloy Steel, Cadmium Plated) | |
| Oxygen and acetylene gas reticulation systems | |
| Performance Requirements for Wire, Electric, Insulated Copper or Copper Alloy | |
| Personal privacy protection in health care information systems | |
| Pipe Clamp Block, (3/16\x94 DIA) | |
| Pipe Clamp, Self-Bonding (Typical Assembly) | |
| Plastic roof and wall cladding materials, Part 1: General requirements | |
| Plastic roof and wall cladding materials, Part 2: Unplasticized polyvinyl chloride (uPVC) building sheets | |
| Plastic roof and wall cladding materials, Part 3: Glass fibre reinforced polyester (GRP) | |
| Plastic roof and wall cladding materials, Part 4: Unplasticized polyvinyl chloride (uPVC) wall cladding boards | |
| Plastic roof and wall cladding materials, Part 5: Polycarbonate | |
| Plug - Blanking (Aluminium Alloy) | |
| Plug, Hex Head | |
| Plug-Blanking (Steel) | |
| Powerplant Fire Detection Instruments-Thermal and Flame Contact Types (Turbine) | |
| Pressure equipment - Hazard levels | |
| Pressure regulators for use with industrial compressed gas cylinders | |
| Pruning of amenity trees | |
| Quality and performance of commercial electrical appliances - Hot food storage and display equipment | |
| Radio equipment and systems - Short range devices, Part 1: Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop... | |
| Radio equipment and systems - Short range devices, Part 2: Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 25 GHz frequency range... | |
| Radiocommunications equipment used in the inshore boating radio services band | |
| Railway safety management - General and interstate requirements | |
| Railway safety management - Operational systems | |
| Railway safety management - Railway interface with other infrastructure | |
| Railway safety management - Rolling stock | |
| Railway safety management - Signalling and telecommunications systems and equipment | |
| Railway safety management - Track, civil and electrical infrastructure | |
| Railway safety management, Part 7: Railway safety investigation | |
| Recommended practice for the collection, detection and quantitation of drugs of abuse in urine | |
| Records management - Appraisal and disposal | |
| Records management - Control | |
| Records management - General | |
| Records management - Responsibilities | |
| Records management - Storage | |
| Records management - Strategies | |
| Reducer (Aluminium Alloy) | |
| Reducer (Steel) | |
| Reducer - Adapter, Conical End to Flared Tube, for Seal Ring | |
| Reducer - Adaptor - Nipple End, Male Nut Union (Steel) | |
| Reducer - Adaptor Assembly \x96 Nipple End, Male Nut Union (Steel) | |
| Reducer, Adapter, Flared Tube to Boss, for Seal Ring | |
| Retainer - Stowage, Signal Lamp | |
| Retaining Cord - Parachute Stowage | |
| Ring, Retaining (Friction Locking) | |
| RING, SEALING, TOROIDAL (O-RING \x96 INCH SERIES) FOR GENERAL AEROSPACE USE | |
| RING, SEALING, TOROIDAL (O-RING \x96 INCH SERIES) FOR USE WITH TAPPED PORT BOSSES TO SAE AS5202 | |
| Ring, Sealing, Toroidal, DTD5613 Grade 90 (Source Control Drawing) | |
| Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286 FSC 5365 | |
| RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION AND HEAT RESISTANT, UNS S66286 | |
| Rotating electrical machines - Repair and overhaul - Low voltage machines | |
| Separable Fittings, Permanent Fittings, Tubing, Fluid Systems 8000 psi Qualification Test Standard for | |
| Skylights | |
| Sleeve, Flared Tube Fitting | |
| Small craft - Hull identification - Coding system | |
| Smoke management systems - Hot smoke test | |
| Soft underlays for textile floor coverings | |
| Soldering electrical and electronic assemblies | |
| Spacer for Pipe Clamp Blocks | |
| Spring - Stowage - Map | |
| Stall Warning Instrument (Turbine Powered Subsonic Aircraft) | |
| Starter, Mounting Pads and Drives-Types I, II, III & IV | |
| Stationary source emissions, Method 1: Selection of sampling positions | |
| Stationary source emissions, Method 2: Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method | |
| Stowage - Map | |
| Stowage for Range-Finder | |
| Strap Assembly for Range-Finder Stowage | |
| Sun protective clothing - Evaluation and classification | |
| Surgical dressings - Absorbent wadding | |
| Surgical dressings - General purpose single-use woven gauze swabs | |
| Surgical dressings - Single-use packing gauze | |
| Surgical dressings - Single-use X-ray detectable abdominal sponges | |
| Surgical face masks | |
| Swaged Coupling-Typical Joints (Steel) | |
| Swaged Couplings - Typical Joints (Aluminium Alloy) | |
| Tachometer Instruments (Indicator and Generator) | |
| Tee - Equal (Steel) | |
| Tee - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling | |
| Tee - Forged Blank - Steel. Swaged Pipe Coupling | |
| Tee - Nipple Branch, Female Nut Union (Steel) | |
| Tee - Nipple End, Female Nut Union (Steel) | |
| Tee Assembly - Nipple Branch, Female Nut Union (Steel) | |
| Tee Assembly - Nipple End, Female Nut Union (Steel) | |
| Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring | |
| Tee Assembly, Flared Tube, Adjustable End on Side, for Seal Ring | |
| Tee Assembly, Flared Tube, Retained Nut on Run, for Seal Ring | |
| Tee Assembly, Flared Tube, Retained Nut on Side, for Seal Ring | |
| Tee, Flared Tube with Pipe Thread on Run, for Seal Ring | |
| Tee, Flared Tube with Pipe Thread on Side, for Seal Ring | |
| Tee, Flared Tube, Internal Thread on Run, for Seal Ring | |
| Tee, Flared Tube, Internal Thread on Side, for Seal Ring | |
| Tee-Branch-Bulkhead (Aluminium Alloy) | |
| Tee-Branch-Bulkhead (Steel) | |
| Tee-End-Bulkhead (Aluminium Alloy) | |
| Tee-End-Bulkhead (Steel) | |
| Tee-Equal (Aluminium Alloy) | |
| Tee-Increased Branch (Steel) | |
| Tee-Increased Branches (Aluminium Alloy) | |
| Tee-Increased End (Steel) | |
| Tee-Increased-End (Aluminium Alloy) | |
| Tee-Reduced Branch (Steel) | |
| Tee-Reduced Branches (Aluminium Alloy) | |
| Tee-Reduced End (Steel) | |
| Tee-Reduced-End (Aluminium Alloy) | |
| Telecommunication overvoltages, Part 1: Protection of persons | |
| Telecommunication overvoltages, Part 2: Protection of equipment | |
| Test Methods for Insulated Electric Wire | |
| Tests for coating resistance to cathodic disbonding | |
| The storage and handling of gases in cylinders | |
| The storage and handling of oxidizing agents | |
| Thrust Wire-Nut Union, Female (Steel) | |
| True Mass Fuel Flow Instruments | |
| Tube - Parachute Stowage | |
| TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD | |
| TURN AND SLIP INDICATOR (TURBINE POWERED, SUBSONIC, AIRCRAFT) | |
| Underground mining - Stationary air compressors | |
| Union (Aluminium Alloy) | |
| Union (Steel) | |
| Union - Bulkhead, Sealed Flange (Aluminium Alloy) | |
| Union - Bulkhead, Triangular Flange (Aluminium Alloy) | |
| Union - Hexagon, Bulkhead (Aluminium Alloy) | |
| Union Assembly, Adjustable End | |
| UNION ASSEMBLY, DOUBLE RETAINED NUT | |
| Union Swaged (Cres) | |
| Union, Reducer, Bulkhead, Flared Tube, for Seal Ring | |
| Union, Swaged (Carbon Steel) | |
| Union-Bulkhead, Sealed Flange (Steel) | |
| Union-Bulkhead, Triangular Flange (Steel) | |
| Union-Hexagon, Bulkhead (Steel) | |
| UTILIZATION OF BATTERY-POWERED GROUND SUPPORT EQUIPMENT | |
| Validation Methods for MIL-STD-1760 Mission Stores | |
| Validation Methods For MIL-STD-1760D Mission Stores | |
| Validation Test Plan for AS4074 Linear Token Passing Multiplex Data Bus | |
| Verification Methods for MIL-STD-1760E Mission Stores | |
| Washer Plate (Aluminium Alloy) | |
| Washer Plate Triangular (Aluminium Alloy) | |
| Washer, Flared Tube Fitting Adjutable End, Design Standard | |
| WATER CONDITIONING AGENTS FOR AQUEOUS MAGNETIC PARTICLE INSPECTION | |
| Water microbiology - Method 11: Pseudomonads - Membrane filtration method | |
| Water microbiology, Method 10: Pseudomonads - Estimation of most probable number (MPN) | |
| Water microbiology, Method 12: Pseudomonas aeruginosa - Estimation of most probable number (MPN) | |
| Water microbiology, Method 13: Pseudomonas aeruginosa - Membrane filtration method | |
| Water microbiology, Method 14: Salmonellae | |
| Water microbiology, Method 15: Examination for Vibrio cholerae | |
| Water microbiology, Method 17.1: Spores of Clostridium perfringens - Membrane filtration method | |
| Water microbiology, Method 17.2: Spores of Clostridium perfringens - Estimation of most probable number (MPN) using the multiple tube dilution technique | |
| Water microbiology, Method 19: Examination for thermophilic Campylobacter spp. - Membrane filtration | |
| Water microbiology, Method 1: General information and procedures | |
| Water microbiology, Method 21: Examination for coliforms and Escherichia coli - Determination of most probable number (MPN) using enzyme hydrolysable substrates | |
| Water microbiology, Method 22: Water quality - Enumeration of Escherichia coli and coliform bacteria - Membrane filtration method for waters with low bacterial background flora | |
| Water microbiology, Method 23: Soils, sediments, sludges, slurries and bio-solids - Procedures for sample preparation | |
| Water microbiology, Method 2: Culture media, diluents and reagents | |
| Water microbiology, Method 3.1: Heterotrophic colony count methods - Pour plate method using plate count agar | |
| Water microbiology, Method 3: Enumeration of heterotrophic microorganisms - Pour plate, spread plate, membrane filtration and most probable number techniques | |
| Water microbiology, Method 4: Coliforms - Estimation of most probable number (MPN) | |
| Water microbiology, Method 5: Coliforms - Membrane filtration method | |
| Water microbiology, Method 6: Thermotolerant coliforms and Escherichia coli - Estimation of most probable number (MPN) | |
| Water microbiology, Method 7: Thermotolerant coliforms and Escherichia coli - Membrane filtration method | |
| Water microbiology, Method 8: Faecal streptococci - Estimation of most probable number (MPN) | |
| Water microbiology, Method 9: Faecal streptococci - Membrane filtration method | |
| Water microbiology, Part 0: Introduction and list of methods | |
| Wheeled fire extinguishers | |
| WIRE, RETAINING FOR RETAINED NUT |
| << Prev | Next >> |