Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
235
236
237
238
239
240
241
242
243
244
245
246
247
250
260
270
280
290
300
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) Aerospace - General Requirements for Commercial Aircraft Hydraulic Components | |
| (R) Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard | |
| (R) Aircraft Maintenance Jacks - General Requirements | |
| (R) Coating Requirements for Aerospace Hand Tools | |
| (R) Design and Performance Criteria Transport Aircraft Portable Megaphones | |
| (R) Driver Drills, Battery Powered | |
| (R) Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware | |
| (R) FITTING ASSEMBLY, ELBOW, 45\xb0, BEAM SEAL, RETAINED NUT | |
| (R) Fitting Assembly, Elbow, 90 Degree, Beam Seal, Retained Nut | |
| (R) FITTING ASSEMBLY, ELBOW, 90\xb0, BEAM SEAL, RETAINED NUT | |
| (R) FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN | |
| (R) FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD | |
| (R) FITTING, COUPLING PIPE, INTERNAL THREAD | |
| (R) FITTING, COUPLING, PIPE, INTERNAL THREAD | |
| (R) Fitting, Cross, Pipe, Internal Thread | |
| (R) Fitting, Elbow, 45, Pipe, Internal and External Thread | |
| (R) Fitting, Elbow, 90, Pipe, Internal and External Thread | |
| (R) Fitting, Elbow, 90, Pipe, Internal Thread | |
| (R) FITTING, ELBOW, 90\xb0, WELD RING | |
| (R) FITTING, NIPPLE, PIPE, EXTERNAL THREAD | |
| (R) Fitting, Plug, Pipe, External Thread, Countersink Hex Head | |
| (R) FITTING, PLUG, PIPE, EXTERNAL THREAD, HEX HEAD | |
| (R) Fitting, Tee, Pipe, Internal Thread | |
| (R) Fittings and Bosses, Pipe Threaded, Fluid Connection | |
| (R) Fittings, 37\xb0 Flared to Pipe Threaded, Fluid Connection | |
| (R) Fittings, 37\xb0 Internal Flare, Fluid Connection, Procurement Specification | |
| (R) Fittings, Beaded to 37\xb0 Flared, Fluid Connection | |
| (R) Fittings, Beaded to Pipe Threaded, Fluid Connection | |
| (R) Fittings, Beaded, Fluid Connection | |
| (R) Fittings, Flanged to Beaded, Fluid Connection | |
| (R) Fittings, Flareless to Pipe Threaded, Fluid Connection | |
| (R) Fittings, Straight Thread Boss or Flanged 37\xb0 Flared, Fluid Connection | |
| (R) Fittings, Straight Thread Port or Flanged to 24\xb0 Cone Flareless, Fluid Connection | |
| (R) Fittings, Straight Threaded Boss or Flanged, Fluid Connection | |
| (R) Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 45 Degree Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 45 Degree Male | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 90 Degree Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 90 Degree Male | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Male | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 45 Degree Female | |
| (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90 Degree Female | |
| (R) Ring, Weld | |
| (R) ROD END - THREADED, AIRCRAFT | |
| (R) Technical Manual Requirements for Ground Support Equipment | |
| Absorbent Pad (Base) | |
| Absorbent Pad (Side) | |
| Accumulator Trough 24V 40AH | |
| Acoustics - Measurement, prediction and assessment of noise from wind turbine generators | |
| Adaptor (Drop Tank) (called for on AS4880) | |
| Adaptor, Elbow, Pipe Edition 2 03/01/1988 | |
| Adaptor, Elbow, Pipe | |
| Adaptor, Straight, Pipe | |
| Aerospace - General Requirements for Commercial Aircraft Hydraulic Components | |
| Air valves for sewerage | |
| Air valves for water supply | |
| AIRCRAFT CIRCUIT BREAKER AND FUSE ARRANGEMENT | |
| Aircraft Fluorescent Lighting Ballast/Fixture Safety Design Standard | |
| Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard | |
| Aircraft Maintenance Jacks - General Requirements | |
| Aircraft New Tire Standard - Bias and Radial | |
| Aluminium and aluminium alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 10: Calculation of peroxide oxidizable sulfur (SPOS), reacted calcium (CaA) and reacted magnesium (MgA) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 11: Calculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 12: Complete suspension peroxide oxidation combined acidity and sulfur (SPOCAS) method | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 13: Determination of acid neutralizing capacity by back-titration (ANCBT) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 14: Calculation of the acid-producing potential of acid sulfate soil using an acid base accounting method | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 1: Pre-treatment of samples | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 3: Determination of peroxide pH (pHox), titratable peroxide acidity (TPA) and excess acid neutralizing capacity (ANCE) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 4: Determination of 1 M potassium chloride extractable sulfur (SKCl), calcium (CaKCl) and magnesium (MgKCl) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 5: Determination of peroxide sulfur (SP), calcium (CaP) and magnesium (MgP) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 6: Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 7: Determination of chromium reducible sulfur (SCR) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 8: Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Method 9: Calculation of titratable sulfidic acidity (TSA) | |
| Analysis of acid sulfate soil - Dried samples - Methods of test, Part 0: Introduction and definitions, symbols and acronyms | |
| Analysis of acid sulfate soil - Dried samples, Method 2: Methods of test - Determination of pHKCl and titratable actual acidity (TAA) | |
| Application specifications for coating systems, Part 1: Single coat inorganic (ethyl) zinc silicate - Solvent-borne | |
| Assembly of Accumulator Trough, 24V. 40AH | |
| Assembly of Pull Control | |
| Balance Weight - Anti-Spin Parachute Jettison Slip | |
| Bobbin - Anti-Spin Parachute Jettison Slip | |
| Body (1/4" Bore Drain Valve) | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .250-28 UNJF-3A Heat Resisting Nickel Alloy (Waspaloy), Unplated, Classification Rm = 1210 MPa (175,000 lbf/in\xb2) Ambient Temperature up to a maximum working... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .250-28 UNJF-3A Heat resisting nickel alloy, Inconel\xae 718 unplated, Classification Rm = 1275 MPa (185,000 lbf/in\xb2) Ambient Temperature and 1000 MPa (145,000... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .3125-24 UNJF-3A Heat Resisting Nickel Alloy (Waspaloy), Unplated, Classification Rm = 1210 MPa (175,000 lbf/in\xb2) Ambient Temperature up to a maximum working... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .3125-24 UNJF-3A Heat resisting nickel alloy, Inconel 718 unplated, Classification Rm = 1275 MPa (185,000 lbf/in\xb2) Ambient Temperature and 1000 MPa (145,000... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .375-24 UNJF-3A Heat resisting nickel alloy, Inconel 718 unplated, Classification Rm = 1275 MPa (185,000 lbf/in\xb2) Ambient Temperature and 1000 MPa (145,000... | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, INCONEL 718, .190-32 UNJF-3A | |
| BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, WASPALOY,. 375-24 UNJF-3A | |
| Bolt, Hexagon Head, PD Shank, .190-32 UNJF-3A. BS 4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, .190-32 UNJF-3A BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, .250-28 UNJF-3A. BS 4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, .3125-24 UNJF-3A. BS 4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, .375-24 UNJF-3A. BS 4084 | |
| BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, P.D. SHANK, INCONEL 718, .250 \x96 28UNJF \x96 3A | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, INCONEL 718, 0.3125 - 24UNJF - 3A.ISO3161 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, Inconel 718, 0.3750 -24UNJF - 3A.ISO3161 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, Waspaloy 0.3750 - 24 UNJF - 3A. BS4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, Waspaloy, 0.2500-28 UNJF-3A. BS 4084 | |
| Bolt, Machine, Double Hexagon Extended Washer Head, P.D. Shank, Waspaloy, 0.3125-24 UNJF-3A. BS 4084 | |
| Bolt, Tee Head, PD Shank, INCONEL 718, 0.1900 - 32UNJF - 3A ISO3161 | |
| Bolt, Tee Head, PD Shank, INCONEL 718, 0.2500 - 28UNJF - 3A ISO3161 | |
| Bolt, Tee Head, PD Shank, INCONEL 718, 0.3125 - 24UNJF - 3A ISO3161 | |
| Bolt, Tee Head, PD Shank, INCONEL 718, 0.3750 - 24UNJF - 3A ISO3161 | |
| Bolt, Tee Head, PD Shank, Waspaloy, 0.2500-28 UNJF-3A BS4084 | |
| Bolt, Tee Head, PD Shank, Waspaloy, 0.3125-24 UNJF-3A BS4084 | |
| Bolt, Tee Head, PD Shank, Waspaloy, 0.3750-24 UNJF-3A BS4084 | |
| Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1,200 \xb0F Procurement Specification | |
| Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 \xb0F Procurement Specification | |
| Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 Degrees F Procurement Specification | |
| Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 \xb0F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification | |
| Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 Degrees F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification | |
| Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing | |
| Boundary Ring for Accumulator Trough | |
| Bracket for Float (called for on AS4881) | |
| Bracket | |
| Bumper Pad (called for on AS4881) | |
| Bushing, Pipe, Internal and External Thread | |
| Butterfly valves for waterworks purposes, Part 1: Wafer and lugged | |
| Butterfly valves for waterworks purposes, Part 2: Double flanged | |
| Cable Duct (Typical Assembly) | |
| Cap (1/4" Bore Drain Valve) | |
| Cap for Packing Piece | |
| Capping (Cable Duct) .72" Wide | |
| Capping (Cable Duct) .88" Wide | |
| Capping (Cable Duct) 1.09" Wide | |
| Carbon accounting for greenhouse sinks, Part 1: Afforestation and reforestation | |
| Cathodic protection - Installation of galvanic sacrificial anodes in soil | |
| CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE | |
| Clips, 180\xb0, with Pressed Ends (Aluminium Alloy) | |
| Clips, 180\xb0, with Pressed Ends (M.S.) Edition 6 | |
| Clips, 360\xb0, with Pressed Ends (M.S.) | |
| Clips, Aluminium, 5/8\x94 Wide | |
| Clips, Aluminium, \xbd\x94 Wide | |
| Clips, Aluminium, \xbe\x94 Wide | |
| Clips, Saddle, with Pressed Ends (Aluminium Alloy) | |
| Clips, Saddle, with Pressed Ends (M.S.) | |
| Closed circuit television (CCTV), Part 1: Management and operation | |
| Closed circuit television (CCTV), Part 2: Application guidelines | |
| Closed circuit television (CCTV), Part 3: PAL signal timings and levels | |
| Closed circuit television (CCTV), Part 4: Remote video | |
| Coating defect surveys for buried pipelines, Part 1: Direct current voltage gradient (DCVG) | |
| Coating Requirements for Aerospace Hand Tools | |
| Collar \x96 Float Needle Conical Rod | |
| Commercial road vehicles - Interchangeable quick connect/release couplings for use with air-pressure braking systems | |
| Connecting Rod Assembly (for Float Operated Cut-Off Valve) | |
| Connecting Rod | |
| Construction management - General conditions | |
| Construction management trade contract\x97General conditions | |
| Consultants agreement - Design and construct | |
| Copper pipe and fittings - Installation and commissioning | |
| Copper, lead and zinc sulfide concentrates - Chemical analysis, Part 1: Determination of gold and silver - Fire assay gravimetric and flame atomic absorption spectrometric method | |
| Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method | |
| Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests | |
| COUPLING, PIPE, INTERNAL THREAD | |
| Cross, Pipe, Internal Thread | |
| Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test | |
| Degradability of plastics - Methods of test - Determination of level of prodegradant ions | |
| Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics | |
| Design and Performance Criteria Transport Aircraft Portable Megaphones | |
| Determination of particle size distribution by gravitational liquid sedimentation methods, Part 1: General principles and guidelines | |
| Determination of the extinction propensity of cigarettes | |
| Digital radio - Terrestrial broadcasting, Part 1: Characteristics of terrestrial digital audio broadcasting (T-DAB ) transmissions | |
| Digital television - Requirements for receivers - VHF/UHF DVB-T television broadcasts | |
| Digital television - Requirements for receivers for VHF/UHF DVB-T television broadcasts including ancillary services | |
| Distance Bush (called for on AS4881) | |
| Distance Piece - Anti-Spin Parachute Jettison Slip | |
| Double-capped fluorescent lamps - Performance specifications, Part 2: Minimum Energy Performance Standard (MEPS) | |
| Double-flanged butterfly valves for waterworks purposes | |
| Dowel - Tubular | |
| Driver Drills Battery Powered | |
| Driver Drills, Battery Powered | |
| Earth-moving machinery - Quickhitches for excavators and backhoe loaders | |
| Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware | |
| Elbow, 45 Degrees, Pipe, Internal and External Thread | |
| Elbow, 90 Degree, Pipe, Internal and External Thread | |
| Elbow, 90 Degree, Pipe, Internal Thread | |
| Electronic messages for exchange of claim and related information | |
| Electronic toll collection - Transaction specification for Australian interoperability on the DSRC link | |
| Emergency eyewash and shower equipment | |
| Employment screening | |
| External field joint coatings for steel pipelines | |
| Feather and down - Methods of test - Determination for the quantitative composition of feather and down (manual method) | |
| Feather and down - Methods of test - Determination of moisture content | |
| Feather and down - Methods of test - Determination of the oxygen index number | |
| Feather and down - Methods of test - Determination of the turbidity of an aqueous extract | |
| Feather and down - Methods of test - Measuring the sizes of quilts filled with feather and/or down | |
| Feather and down - Methods of test - Sampling in view of tests | |
| FITTING ASSEMBLY, ELBOW, 45\xb0, BEAM SEAL, RETAINED NUT | |
| FITTING ASSEMBLY, ELBOW, 90\xb0, BEAM SEAL, RETAINED NUT | |
| FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN | |
| FITTING, BEAM SEAL, MALE TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC | |
| Fitting, Elbow, 90 Degrees, Weld Ring | |
| FITTING, PLUG, PIPE, EXTERNAL THREAD, HEX HEAD | |
| FITTING, TEE, WELD RING | |
| Fittings and Bosses, Pipe Threaded, Fluid Connection, Procurement Specification | |
| Fittings and Bosses, Pipe Threaded, Fluid Connection, Standard | |
| Fittings, 37 Degree Flared to Pipe Threaded, Fluid Connection,Standard | |
| Fittings, 37 Degree Flared, Fluid Connection, Standard | |
| Fittings, 37 Degree Internal Flare, Fluid Connection, Procurement Specification | |
| Fittings, 37\xb0 Internal Flare, Fluid Connection, Procurement Specification | |
| Fittings, Beaded to 37 Degree Flared, Fluid Connection, Standard | |
| Fittings, Beaded to Pipe Threaded, Fluid Connection, Standard | |
| Fittings, Beaded, Fluid Connection, Standard | |
| Fittings, Flanged to Beaded, Fluid Connection, Standard | |
| Fittings, Flareless to Pipe Threaded, Fluid Connection | |
| Fittings, Straight Thread Boss or Flanged to 37 Degrees Flared, Fluid Connection | |
| Fittings, Straight Thread Port or Flanged to 24 Degree Cone Flareless, Fluid Connection | |
| Fittings, Straight Threaded Boss or Flanged, Fluid Connection, Procurement Specification | |
| Fittings, Straight Threaded Boss or Flanged, Fluid Connection, Standard | |
| Flammable and combustible liquids - Precautions against electrostatic ignition during tank vehicle loading | |
| FLANGE PILOT-ACCESSORY, O RING SEAL | |
| Float (called for on AS4881) | |
| Float Assembly | |
| Float Operated Cut-Off Valve | |
| Float Support Strap (called for on AS4881) | |
| Form of formal instrument of agreement | |
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | |
| Gas fuel systems for forklifts and industrial engines | |
| Gasket, Fitting End, 24 Degree Cone | |
| Gasket, Fitting End, 37 Degree Flared | |
| Gasket, Fitting End, 37 Degrees Flared | |
| GASKET, FITTING END, 37\xb0 FLARED | |
| General conditions of contract for design and construct | |
| General conditions of contract for periodic supply of goods | |
| General conditions of contract for the provision of asset maintenance and services (Principal's version) | |
| General conditions of contract for the provision of asset maintenance and services (Short version) | |
| General conditions of contract for the provision of asset maintenance and services (Superintendent\x92s version) | |
| General conditions of contract for the supply of equipment with installation | |
| General-purpose flat pallets - Principal dimensions and tolerances (International pallet sizes) | |
| Generic Open Architecture (GOA) Framework | |
| Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Decision rules for proving conformance or non-conformance with specifications | |
| Gland Design, Elastomeric O-Ring Seals, Static Radial and Face 800 PSI Maximum Service | |
| Gland Design: Nominal 3/8 in Cross Section for Custom Compression Type Seals | |
| Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals | |
| Grid connection of energy systems via inverters - Grid protection requirements | |
| Grid connection of energy systems via inverters - Installation requirements | |
| Grid connection of energy systems via inverters - Inverter requirements | |
| Guide to the investigation of potentially contaminated soil and deposited dust as a source of lead available to humans | |
| Guidelines for validation procedures for chemical analysis of agricultural and contaminated soil | |
| Health care provider identification | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45 DEGREES MALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45\xb0 FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45\xb0 MALE | |
| Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 90 Degree Male | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90 DEGREES MALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90\xb0 FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90\xb0 MALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT MALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREES FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45\xb0 FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREES FEMALE | |
| HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90\xb0 FEMALE | |
| Hose Assembly, Polytetrafluoroethyl ene (PTFE), Low Pressure, 450 \xb0F and Fireproof, Procurement Specification For | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Female to 45 Degree Male | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Female to 90 Degree Female | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Female to 90 Degree Male | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Female to Straight Male | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Male to 45 Degree Female | |
| Hose Assembly, Silicone, Lined - Fixed Cavity Coupling, Potable Water, 125 psi, Straight Male to 90 Degree Female | |
| Hose, Air Duct, Flexible, Silicone-Coated Fabric, 1 psi, External Nylon Helix, Self-Extinguishing | |
| HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, EXTERNAL NYLON HELIX, LOW-NOISE | |
| Human Factors Considerations for Outdoor Laser Operations in the Navigable Airspace | |
| Hygienic production of pet meat | |
| Identification cards - Integrated circuit(s) cards with contacts - Numbering system and registration procedure for application identifiers | |
| IDENTIFICATION MARKING METHODS | |
| Incandescent lamps for general lighting services, Part 2: Minimum Energy Performance Standards (MEPS) requirements | |
| Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks | |
| Industrial wire screens - Technical requirements and testing | |
| Information processing systems - Local area networks - Distributed queue dual bus subnetwork of a metropolitan area network | |
| Information processing systems - Local area networks - Overview and architecture | |
| Information processing systems - Local area networks - Token ring access method and physical layer specifications | |
| Information processing systems - Local area networks - Token-passing bus access method and physical layer specifications | |
| Information processing systems - Local area networks, Part 1: Overview and architecture - Media access control bridges (Supplement to AS 4802.1-1992) | |
| Information processing systems - Local area networks, Part 1: Overview and architecture - System load protocol (Supplement to AS 4802.1-1992) | |
| Information processing systems - Local area networks, Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Layer management (Supplement to AS 4802.3-1991)... | |
| Information processing systems - Local area networks, Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Multisegment 10 Mb/s baseband | |
| Information processing systems - Local area networks, Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications | |
| Inscriptions for Pull Control Knob (AS496) | |
| Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked Procurement Specification for | |
| Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For | |
| Inspection and integrity monitoring of large steel vertical petroleum storage tanks | |
| Installation of underground utility services and pipelines within railway boundaries | |
| Knob for Pull Control | |
| Knowledge-based identity authentication - Recognizing Known Customers | |
| Lead and lead alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method | |
| Link Pin - Float | |
| Link Pin | |
| Low pressure regulators for use in industrial compressed gas reticulation systems | |
| Masonry in small buildings - Construction | |
| Masonry in small buildings - Design | |
| Mechanical tapping bands for waterworks purposes | |
| Method for the qualitative identification of asbestos in bulk samples | |
| Method of test for determination of histamine levels in fish and fish products/seafoods by fluorometric method | |
| Methods of test for coated fabrics, Method 11: Determination of blocking resistance | |
| Methods of test for coated fabrics, Method 2: Determination of length, width and net mass | |
| Methods of test for coated fabrics, Method 3: Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate | |
| Methods of test for coated fabrics, Method 4: Determination of thickness | |
| Methods of test for coated fabrics, Method 5: Determination of bursting strength | |
| Methods of test for coated fabrics, Method 6: Determination of tensile strength and elongation at break | |
| Methods of test for coated fabrics, Method 7: Determination of tear resistance | |
| Methods of test for coated fabrics, Method 8: Determination of coating adhesion | |
| Methods of test for coated fabrics, Method 9: Determination of resistance to damage by flexing | |
| Minor works contract conditions (Principal administered) | |
| Minor works contract conditions (Superintendent administered) | |
| Motor vehicle frontal protection systems, Part 1: Road user protection | |
| Needle Float Chamber | |
| Nipple, Pipe, External Thread | |
| Non-destructive examination and discard criteria for wire ropes in mine winding systems | |
| Non-return valves for waterworks purposes - Swing check and tilting disc | |
| Non-reusable personal use containers for the collection and disposal of hypodermic needles and syringes | |
| Occupational health and safety management systems - Specification with guidance for use | |
| Oil of Backhousia citriodora, citral type (lemon myrtle oil) | |
| Packaging for surface transport of biological material that may cause disease in humans, animals and plants | |
| Packing Piece for Cable Duct | |
| Particle size analysis - Laser diffraction methods - General Principles | |
| Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form | |
| Petroleum products - Pipeline, road tanker compartment and underground tank identification | |
| Pin insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. | |
| Pivot Pin - Anti-Spin Parachute Jettison Slip | |
| Playing field equipment - Soccer goals, Part 1: Safety aspects | |
| Plug, Pipe, External Thread, Countersink Hex Head | |
| Plug, Pipe, External Thread, Hex Head | |
| Plug, Pipe, External Thread | |
| Pressed End for Clips - to suit 2 B.A. Bolts | |
| Pressure equipment - Glossary of terms | |
| Pressure-sensitive labels for stock-paper, stock-plastic and general purpose use | |
| Procedures for specimen collection and the detection and quantitation of drugs in oral fluid | |
| Project management - General conditions | |
| Project performance measurement using Earned Value | |
| Protection Covers for Flanges and Drives | |
| Protection of trees on development sites | |
| Protective clothing for fire-fighters - Requirements and test methods for protective clothing used for structural firefighting | |
| Protective clothing for fire-fighters - Requirements and test methods for protective clothing used for wildland firefighting | |
| Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting | |
| PUMP, FUEL, MOUNTING PAD AND DRIVE | |
| Quantification, monitoring and reporting of greenhouse gases in forest projects, Part 1: Afforestation and reforestation | |
| Recommended practice for inductively coupled plasma mass spectrometry (ICP-MS), Part 2: Quantitative determination - Water | |
| Recommended practice for inductively coupled plasma-mass spectrometry (ICP-MS) - Principles and techniques | |
| Relative Thermal Life and Temperature Index for Insulated Electric Wire | |
| Relative Thermal Life and Temperature Index | |
| Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions | |
| Representation of results of particle size analysis, Part 1: Graphical representation | |
| Representation of results of particle size analysis, Part 4: Characterization of a classification process | |
| Retaining Strap Accumulator Trough | |
| Ring, Weld Fitting | |
| Rivet (called for on AS4889) | |
| Rivet - Float (called for on AS4881) | |
| Rivet - Float Strap to Bracket (called for on AS4881) | |
| ROD END - THREADED, AIRCRAFT | |
| Rod for Pull Control | |
| Roller - Anti-Spin Parachute Jettison Slip | |
| Rubber Pad - Control Stops | |
| Rubber- or plastics-coated fabrics, Part 3: Specification for polyurethane-coated woven fabrics | |
| Sample preparation for particle size analysis - Dispersing procedures for powders in liquids | |
| Seating | |
| Self ballasted lamps for general lighting services, Part 2: Minimum Energy Performance Standard (MEPS) | |
| Set Screw for Float Operated Cut Off Valve | |
| Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For | |
| Shear Bushes - Parallel | |
| Shear Bushes - Taper | |
| Shielding gases for welding | |
| Skid Control Equipment | |
| Sleeve for Pull Control | |
| Software Interfaces for Ground-Based Monitoring Systems | |
| Solid State Power Controller, General Standard For | |
| Solid-State Power Controller, General Standard For | |
| Spacer (Cable Duct) | |
| Spring (for Connecting Rod Assembly) (AS4889) Edition 2 02/07/1967 | |
| Spring - Anti-Spin Parachute Jettison Slip | |
| Spring Clip (Cable Duct) | |
| Spring Float Needle (Conical) (called for on AS4889) | |
| Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For | |
| Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy, Procurement Specification for | |
| Sprocket (Blanks) for Chains, Non-Reversible Control | |
| Stainless steel chain for lifting purposes | |
| Subcontract conditions for design and construct | |
| Subcontract conditions | |
| Synthetic weed blocking fabric | |
| Tab Washer - Float Bracket | |
| Tab Washer 1/2" Gas | |
| Technical Manual Development for Ground Support Equipment | |
| Tee Piece for Packing | |
| Tee, Pipe, Internal Thread | |
| The design, installation and operation of underground petroleum storage systems | |
| The removal and disposal of underground petroleum storage tanks | |
| The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating and allied processes | |
| Thermal performance of refrigerated transport equipment - Specification and testing | |
| Timber - Softwood - Sawn and milled products, Part 1: Product specification | |
| Timber - Softwood - Sawn and milled products, Part 2: Grade description | |
| Timber - Softwood - Sawn and milled products, Part 3: Timber for furniture components | |
| Timber flooring, Part 2: Sanding and finishing | |
| Transfusion sets for single use | |
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents, Part 1: Metallic materials | |
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents, Part 2: Non-metallic materials (ISO 11114-2:2000, MOD) | |
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents, Part 3: Autogenous ignition test in oxygen atmosphere | |
| Tunnel fire safety | |
| User-applied identification labels for use on fluid bags, syringes and drug administration lines | |
| Validation Methods for MIL-STD-1760 Aircraft Station Interfaces | |
| Validation Methods for MIL-STD-1760B Aircraft Station Interfaces | |
| Validation Methods for MIL-STD-1760C Aircraft Station Interfaces | |
| Variable message signs - Fixed signs | |
| Variable message signs, Part 2: Portable signs | |
| Verification Methods for MIL-STD-1760E Aircraft Station Interfaces | |
| Washer (called for on AS4889) | |
| Water Conditioning Agents for Aqueous Magnetic Particle Inspection | |
| Water supply - Metal bodied and plastic bodied ball valves for property service connection | |
| Wire Thread Inserts (BA, BSF & BSW) Cadmium Plated | |
| Wire Thread Inserts (BSPF) Cadmium Plated | |
| Work in compressed air and hyperbaric facilities - Hyperbaric oxygen facilities | |
| Work in compressed air and hyperbaric facilities, Part 1: Work in tunnels, shafts and caissons | |
| Work order |
| << Prev | Next >> |