Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
160
170
180
190
200
204
205
206
207
208
209
210
211
212
213
214
215
216
220
230
240
250
260
270
300
350
400
450
500
550
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems | |
| (R) Aircraft Crash Axes | |
| (R) Aircraft Lightning Environment and Related Test Waveforms | |
| (R) Aircraft Lightning Test Methods | |
| (R) Aircraft Lightning Zone | |
| (R) Aircraft Refueling Vehicle Design and Performance Requirements | |
| (R) Aircraft Seat Design Guidance and Clarifications | |
| (R) Analytical Methods for Aircraft Seat Design and Evaluation | |
| (R) Balancing Machines - Description and Evaluation Vertical, Single-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| (R) Cargo Restraint Straps - Utilization Guidelines | |
| (R) Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace | |
| (R) Control Measures for Laser Safety in the Navigable Airspace | |
| (R) Deicing Facility Operational Procedures | |
| (R) Design Guidelines for Aircraft Mechanical Control Systems and Components | |
| (R) Design Recommendations for Spare Seals in Landing Gear Shock Struts | |
| (R) Design Requirements and Test Procedures for Dual Mode Exterior Lights | |
| (R) Disposition of Landing Gear Components Involved in Accidents/Incidents | |
| (R) Electrohydraulic Servovalves | |
| (R) Electronic Aeronautical Symbols | |
| (R) Emergency Evacuation Illumination | |
| (R) Emergency Placarding - Internal and External | |
| (R) Emergency Portability of Slide/Rafts | |
| (R) Endurance Time Test Procedures for SAE Type II/III/IV Aircraft Deicing/Anti-Icing Fluids | |
| (R) Gas Turbine Engine Performance Presentation and Nomenclature For Object-Oriented Computer Programs | |
| (R) Ground Equipment - 400 Hertz Ground Power Performance Requirements | |
| (R) Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for | |
| (R) Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment | |
| (R) Guidelines for Engine Component Tests | |
| (R) Guidelines for Testing and Support of Aerospace, Fiber Optic, Inter-Connect Systems | |
| (R) Hand Held Aircraft Tire Inflation Pressure Gauges | |
| (R) Heat Application for Thermosetting Resin Curing | |
| (R) High Intensity Discharge Light Sources | |
| (R) Integration Procedures for the Introduction of New Systems to the Flight Deck | |
| (R) Landing Gear Shock Absorption Testing of Civil Aircraft | |
| (R) Legibility of Print on Aerospace Wires and Cables | |
| (R) Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments | |
| (R) Method of Testing Pre-Conditioned Air Equipment | |
| (R) Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage | |
| (R) Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels | |
| (R) Nose Gear Towbarless Tow Vehicle Basic Test Requirements | |
| (R) Observers for Laser Safety in the Navigable Airspace | |
| (R) Oxygen Cylinder Installation Guide | |
| (R) Plain Bearing Lined Inside Diameter Plug Gaging | |
| (R) Plain Bearing No-Load Rotational Breakaway Torque Measurement | |
| (R) Plain Spherical Bearing Conformity Examination | |
| (R) Recommended Design and Test Requirements for Hydraulic Check Valves | |
| (R) Recommended Practice for Measurement of Static and Dynamic Characteristic Properties of Aircraft Tires | |
| (R) Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications | |
| (R) Recommended Test Requirements for Electrohydrostatic Actuators | |
| (R) Rolling Element Bearing Hardness Test | |
| (R) Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service | |
| (R) Safety Assessment of Transport Airplanes in Commercial Service | |
| (R) Safety Considerations for Lasers Projected in the Navigable Airspace | |
| (R) Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly | |
| (R) Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells | |
| (R) Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration | |
| (R) Towbarless Towing Vehicle Operating Procedure | |
| (R) Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground | |
| (R) Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells | |
| (R) User\x92s Manual for Certification of Aircraft Electrical/Electroni c Systems for the Indirect Effects of Lightning | |
| (R) Vacuum Bagging of Thermosetting Composite and Metalbond Repairs | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Engineer Knowledge Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Installer Knowledge Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Quality Assurance Knowledge Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Technician Knowledge Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Hands-on Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Installer Hands-on Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Knowledge Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Technician, Quality Assurance Inspector, or Engineer Hands-on Competencies | |
| A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education | |
| A Re-Certification Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies | |
| Abuse Load Testing for In-Seat Deployable Video Systems | |
| ACCESSORY ENVELOPE FOR 8" NOMINAL DIAMETER GENERATORS | |
| Accessory Envelope Type XII for 6 1/2" Nominal Diameter Generation | |
| Accessory Envelope Type XVI for 11" Nominal Diameter Generators AC or DC 15 to 60 KVA (Type I & II) | |
| Accessory Envelope Type XVI for 11" Nominal Diameter Generators AC or DC Above 60 KVA (Type I & II) | |
| Acoustical Considerations for Engine Test Cells | |
| Actuators, Linear Mechanical, General Specification Guide | |
| Aerospace - Testing of Electromechanical Actuators, General Guidelines For | |
| Aerospace - Valves, Check, Hydraulic, Aircraft and Missile | |
| Aerospace \x96 Test Methodology for Electrohydrostatic Actuators | |
| Aerospace Active Inceptor Systems for Aircraft Flight and Engine Controls | |
| Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems | |
| Aerospace-Interface Definition for Mechanical Actuation Subsystems | |
| Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting | |
| Air Cargo Pallets - Utilization Guidelines | |
| Air Mode Active Containers Conditioning Performance | |
| Aircraft Cargo Systems - Missing Restraint Limitations Layouts | |
| Aircraft Crash Axes | |
| Aircraft Engine Fuel Pump Cavitation Endurance Test | |
| Aircraft Flame Arrestor Installation Guidelines and Test Methods | |
| AIRCRAFT FUEL PUMP CAVITATION ENDURANCE TEST | |
| Aircraft Fueling Adapter Wear Limits | |
| Aircraft Gas Turbine Engine Health Management System Development and Integration Guide | |
| Aircraft Inflight Icing Terminology | |
| Aircraft Lightning Direct Effects Certification | |
| Aircraft Lightning Environment and Related Test Waveforms | |
| Aircraft Lightning Test Methods | |
| Aircraft Lightning Zoning | |
| Aircraft Precipitation Static Certification | |
| Aircraft Seat Design Guidance and Clarifications | |
| Aircraft Tire-to-Wheel Performance Characteristics | |
| Aircraft Wheel Inflation Valves Incorporating an Inflation Pressure Gauge | |
| Airfield Liquid Anti-Icing/Deicing Chemical Applicator to Include Carrier Vehicle | |
| Airport Runway Brooms | |
| Alloy Verification and Chemical Composition Inspection of Welding Wire | |
| Alternative (Ecological) Method for Measuring Electronic Product Immunity to External Electromagnetic Fields | |
| Analytical Methods for Aircraft Seat Design and Evaluation | |
| Application Guide for Aerospace Hydraulic Motors | |
| Application of Pure-Tone Atmospheric Absorption Losses to One-Third Octave-Band Data | |
| APU Gas Turbine Engine Test Cell Correlation | |
| Assessment of Aircraft Wheel Sealing Systems | |
| Autopilot, Flight Director, and Autothrust Systems | |
| Aviation Fuel Facilities | |
| BALANCING MACHINES - DESCRIPTION AND EVALUATION HORIZONTAL, TWO-PLANE, SOFT-BEARING TYPE FOR GAS TURBINE ROTORS (STABILIZED TYPE) | |
| Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors | |
| Balancing Machines - Description and Evaluation Vertical, Single-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| Cabin Attendant Stations | |
| Cabin Crew Stations | |
| Cabin-Attendant Stations | |
| CARBURETOR ENVELOPE, AIRCRAFT - SIZE 48 | |
| Cargo Restraint Straps - Utilization Guidelines | |
| Cargo Shoring Guidelines | |
| Centrifugal Aircraft Fuel Pump Requirements, Design and Testing, Aerospace Standard | |
| Certification of Aircraft Electrical/Electroni c Systems for the Indirect Effects of Lightning | |
| Chassis Mounted Lifts Used to Board Airline Passengers With Mobility Impairments | |
| Cockpit Display of Data Linked Weather Information | |
| Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace | |
| Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace | |
| Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications | |
| Composite Honeycomb NDI Reference Standards | |
| Composite Repair NDT/NDI Handbook | |
| Control Measures for Laser Safety in the Navigable Airspace | |
| Core Restoration of Thermosetting Composite Components | |
| COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, MINITURE SELF-ALIGNING, SELF-SEALING DISCONNECTS | |
| Deicing Facility Operational Procedures | |
| Design and Maintenance Considerations For Aircraft Exterior Lighting Plastic Lenses | |
| Design and Operation of Aircraft Refueling Tanker Vehicles | |
| Design Criteria for Lifts Used to Board Passengers with Mobility Impairments onto Aircraft with Doorsill Heights of 144 in or Less | |
| Design Criteria for Lifts Used to Board Passengers with Mobility Impairments onto Aircraft with Doorsill Heights of 144 in. or Less | |
| Design Recommendations for Spare Seals in Landing Gear Shock Struts | |
| Design Requirements and Test Procedures for Dual Mode Exterior Lights | |
| Design, Layout, Criteria - Plastic Integrally Lighted Panels | |
| DESIGNATION OF DIRECTION OF ROTATION OF HELICOPTER ROTORS (STABILIZED TYPE) | |
| Designation of Direction of Rotation of Helicopter Rotors | |
| DETAIL REQUIREMENTS FOR 4000 AND 5000 PSI AIRCRAFT HYDRAULIC SYSTEMS | |
| Development Process - Aerospace Fly-By-Wire Actuation System | |
| Disposition of Damaged Wheels Involved in Accidents/Incidents | |
| Disposition of Landing Gear Components Involved in Accidents/Incidents | |
| Document for Electric Power Management | |
| Drying of Thermosetting Composite Materials | |
| Dynamic Radial Load Test, Track Roller Bearing | |
| Dynamic Radial Load Test, Track Roller Bearings | |
| Elbow Assembly- Shielded Spark Plug- .750-20 Thread | |
| Electromechanical Actuators Specification Guide | |
| Electronic Aeronautical Symbols | |
| Electronic Display of Aeronautical Information (Charts) | |
| EMERGENCY EVACUATION ILLUMINATION | |
| Emergency Flotation Equipment | |
| EMERGENCY ILLUMINATION | |
| EMERGENCY PLACARDING - INTERNAL AND EXTERNAL | |
| Emergency Portability of Slide/Rafts | |
| Emergency, Instruction, and Information Placards - Internal and External | |
| Enclosed Operator's Cabin for Aircraft Ground Deicing Equipment | |
| Enclosed Operator\x92s Cabin for Aircraft Ground Deicing Equipment | |
| Endurance Time Tests for Aircraft Deicing/Anti-Icing Fluids SAE Type II, III, and IV | |
| Filter Patch Testing Procedures for Aerospace Hydraulic Pumps and Motors | |
| Final Approach Spacing System (FASS) | |
| Flammability Test Method For Aircraft Comfort Blankets | |
| Flight Attendant Stations | |
| Flight Crew Interface Considerations in the Flight Deck Design Process for Part 25 Aircraft | |
| Flight Critical Control Valves, Military Aircraft | |
| FLIGHT DECK CONTROLS AND DISPLAYS FOR COMMUNICATION | |
| Fluid Connections, Fittings, Hex Width | |
| Fluid Fittings - Jump Size Limitations | |
| Gas Turbine Engine Performance Presentation and Nomenclature for Digital Computers Using Object-Oriented Programming | |
| Gas Turbine Engine Performance Presentation and Nomenclature for Object-Oriented Computer Programs | |
| Ground Equipment - 400 Hertz Ground Power Performance Requirements | |
| Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for | |
| Guide to Certification of Aircraft in a High Intensity Radiated Field (HIRF) Environment | |
| Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Knowledge Competencies | |
| Guidelines for Engine Component Tests | |
| Guidelines for Harness Critical Clamp Locator Marker Installation on Electrical Cable Assemblies | |
| Guidelines for Specifying Linear and Rotary Variable Differential Transformers | |
| Guidelines for Testing and Support of Aerospace, Fiber Optic, Inter-Connect Systems | |
| Guidelines for Time-Limited-Dispatc h (TLD) Analysis for Electronic Engine Control Systems | |
| Guidelines for Wire Identification Marking Using the Hot Stamp Process | |
| Hand Held Aircraft Tire Inflation Pressure Gauges | |
| Health and Usage Monitoring Metrics Monitoring the Monitor | |
| Heat Application for Thermosetting Resin Curing | |
| High Intensity Discharge Light Sources | |
| High Temperature Insulated Terminal Lugs | |
| Human Engineering Considerations for Airborne Implementation of Enhanced Synthetic Vision Systems | |
| Human Engineering Considerations for Design and Implementation of Perspective Flight Guidance Displays | |
| Human Factor Considerations in the Design of Multifunction Display Systems for Civil Aircraft | |
| Human Interface Criteria for Cockpit Display of Traffic Information | |
| Human Interface Criteria for Terrain Separation Assurance Display Technology | |
| Human Interface Criteria for Vertical Situation Awareness Displays | |
| Identifiication and Implementation of Global Standardization Opportunities in the Commercial Jet Transport Industry | |
| Ignition System Testing - Metering and Power Supplies | |
| Ignition System Testing- Metering and Power Supply Regulation | |
| Impregnation of Dry Fabric and Ply Lay-Up | |
| Installation Standard for Couplings | |
| INSTRUMENTATION AND COCKPIT CONTROL ARRANGEMENT FOR ELECTRONIC NAVIGATION AND COMMUNICATION AIDS | |
| INSTRUMENTATION AND COCKPIT CONTROLS FOR ELECTRONIC NAVIGATION AND COMMUNICATION AIDS | |
| Integration Procedures for the Introduction of New Systems to the Cockpit | |
| Knobs, Control Aircraft, Recommended Design | |
| Landing Gear Fatigue Tests with Equivalent Damage Spectra | |
| Landing Gear Shock Absorption Testing of Civil Aircraft | |
| Laser Beam Divergence Measurements Techniques Comparison | |
| LED Passenger Reading Light Assembly | |
| Legibility of Print on Aerospace Wires and Cables | |
| Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments | |
| Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Lighted Instruments | |
| Location of and Display Symbology Requirements for Head-Down Electronic Flight Displays for Steep IMC Approaches | |
| Maintenance and Inspection Procedures for Acme Screw Assemblies | |
| Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials | |
| Measurement Procedures for Short Pulse Width Strobe Anticollision Lights | |
| Measurement Procedures for Strobe Anticollision Lights | |
| Mechanical Control Design Guide | |
| Method of Testing Pre-Conditioned Air Equipment | |
| Methods, Locations And Criteria For System Sampling And Measuring The Solid Particle Contamination Of Hydraulic Fluids | |
| Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage | |
| Minimum Performance Recommendations for Part 23, 27, and 29 Aircraft Wheels, Brakes, and Wheel and Brake Assemblies | |
| MISSILE HYDRAULIC PUMPS | |
| Mixing Resins, Adhesives and Potting Compounds | |
| Mixing Resins, Adhesives, and Potting Compounds | |
| Mobile Digital Infrared Pavement Surface, Ambient Air and Dew Point Temperature Sensor System | |
| Modification or Replacement of Components on Dynamically Certified Seat Systems | |
| MOMENT WEIGHT OF TURBINE AND COMPRESSOR ROTOR BLADES (STABILIZED TYPE) | |
| Moment Weight of Turbine and Compressor Rotor Blades | |
| Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems | |
| Multi-Tasking Equipment (MTE) for Airfield Snow Removal High Speed, Multi-Tasking Snow Removal Unit to include Carrier Vehicle, Snow Plow, Rotary Broom High Velocity Air Blast | |
| Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels | |
| Nose Gear Towbarless Tow Vehicle Basic Test Requirements | |
| Observers for Laser Safety in the Navigable Airspace | |
| Optical Measurement Procedures for Airborne Head up Display (HUD) | |
| OUTLINE AND INSTRUCTIONS FOR PREPARATION OF MODEL SPECIFICATIONS FOR HYDRAULIC SYSTEM EQUIPMENT | |
| Oxygen Cylinder Installation Guide | |
| PASSAGEWAY DOOR OPERATION (STABLIZED TYPE) | |
| Passageway Door Operation | |
| PASSENGER ESCAPE DEVICES - CIVIL AIR TRANSPORT | |
| PASSENGER EVACUATION DEVICES - CIVIL AIR TRANSPORT | |
| Periodic Test for Processing Solutions | |
| Periodic Test Plan for Processing Solutions | |
| Photometric Data Acquisition Procedures for Impact Test | |
| Pilot Training Recommendations for Unmanned Aircraft Systems (UAS) Civil Operations | |
| Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners | |
| Plain Bearing High Speed Oscillation Test | |
| Plain Bearing Lined Inside Diameter Plug Gaging | |
| Plain Bearing Low Speed Oscillation Test | |
| Plain Bearing No-Load Rotational Breakaway Torque Measurement | |
| Plain Bearing Radial Limit and Ultimate Load Tests | |
| Plain Bearing Test Methods | |
| Plain Bearing Wear Measurement | |
| Plain Spherical Bearing Conformity Examination | |
| Plain Spherical Bearing Radial and Axial Clearance Measurement | |
| Precision Control Motors \x96 400 Cycles | |
| Precision Control Motors- 400 Cycles | |
| Procedure for Determining Thrust Wire Lengths and Minimum Insertion Depths | |
| Process to Obtain Holdover Times for Aircraft Deicing/Anti-Icing Fluids, SAE AMS1428 Types II, III, and IV | |
| PROPELLER SHAFT ENDS - FLANGED SMALL AIRCRAFT ENGINE (STABILIZED TYPE) | |
| PROPELLER SHAFT ENDS - FLANGED SMALL AIRCRAFT ENGINE | |
| Qualification Process for SAE AMS1428 Type II, III, and IV Fluids | |
| Qualifications Required for SAE Type II/III/IV Aircraft Deicing/Anti-Icing Fluid | |
| Quality Management Systems Audit Requirements for Aviation, Space, and Defense Organizations | |
| Quality Program Guidelines for Deicing/Anti-Icing of Aircraft on the Ground | |
| R) Emergency, Instruction and Information Placards - Internal and External | |
| Recommendations for Installation of Seals in Standard Glands | |
| Recommended Failure Modes and Effects Analysis (FMEA) Practices for Non-Automobile Applications | |
| Recommended Practice for the Measurement of Static and Dynamic Properties of Aircraft Tires | |
| Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications | |
| Recommended Solid Film Lubricants for Fluid System Components | |
| Recommended Test Fluids for Electrical Components Used on Aircraft Exterior or for Ground Support Near Aircraft | |
| Recommended Test Requirements for Electromechanical Actuators | |
| Recommended Wheel Tie Bolt Preload Procedure | |
| Replacement or Modification of Components on Aircraft Seat Restraint Systems by Non-Original Equipment Manufacturers | |
| Requirements for Alternative Coatings Used in Lieu of Nickel-Chromium Plating for Aerospace Hand Tools | |
| RMS Terms and Definitions | |
| Rolling Bearing Dynamic Radial Load Test | |
| Rolling Element Bearing Axial and Radial Internal Clearance | |
| Rolling Element Bearing Hardness Test | |
| Rolling Element Bearing No-Load Torque Test | |
| Rolling Element Bearing Test Method for Dimensional Stability | |
| Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing | |
| Rolling Element Bearing Test Methods | |
| Rolling Element Test Method for Axial Limit and Fracture Load Testing | |
| Rotary Plow With Carrier Vehicle | |
| Rotorcraft: Application of Existing Aircraft Designed Tires, Wheels and Brakes | |
| Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service | |
| Safety Assessment of Transport Airplanes in Commercial Service | |
| Safety Briefings for Passengers in Exit Rows | |
| Safety Considerations for Aircraft-Mounted Lasers Projected Into the Navigable Airspace | |
| Safety Considerations for High-Intensity Lights (HIL) Directed into the Navigable Airspace | |
| Safety Considerations for Lasers Projected in the Navigable Airspace | |
| Safety Instructions for Sight-Impaired Passengers | |
| Shipping Caps, Covers and Plugs | |
| SILVER AND COPPER ALLOY BRAZED JOINTS FOR AEROSPACE PROPULSION SYSTEMS | |
| SILVER AND COPPER ALLOY BRAZED JOINTS FOR AIRCRAFT POWERPLANTS | |
| Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems | |
| Silver, Copper, and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems | |
| Solid Composite Laminate NDI Reference Standards | |
| Specification Guide for Power Drive Units (PDUs) | |
| Stationary Runway Weather Information System (In-Pavement) | |
| Storage of Aerospace Elastomeric Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly | |
| Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly | |
| Stowage of Cabin Emergency Flotation Equipment | |
| Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells | |
| TERMINALS - INPUT - IGNITION EXCITERS | |
| TERMINALS - INPUT AND OUTPUT - IGNITION EXCITERS | |
| TERMINALS-INPUT-IGNI TION EXCITERS | |
| Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration | |
| Tire Overspeed Landing Test | |
| TLTV - Aircraft NLG Steering and Tractive Force Protection Systems or Alerting Devices - Inspection, Maintenance and Calibration Requirements | |
| Towbarless Towing Vehicle Operating Procedure | |
| Training Pilots Prior Simultaneous Instrument Landing System (ILS) Precision Runway Monitor (PRM) Approaches to Closely-Spaced Parallel Runways | |
| Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground | |
| Transport Category Airplane Head Up Display (HUD) Systems | |
| Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells | |
| Turbine Flowmeter Fuel Flow Calculations | |
| Unauthorized Laser Illuminations: Pilot Operational Procedures | |
| UNIFORM DASH NUMBERING SYSTEM FOR O-RINGS | |
| Universal Horizontal Field Maintenance Stand for 10,000 lb. Weight Class Propulsion Units (48" and 30" Rail Gage) | |
| Universal Horizontal Field Maintenance Stand for 10,000 Pound Weight Class Propulsion Units (48 inch and 30 inch Rail Gage) | |
| User's Manual for Certification of Aircraft Electrical/Electroni c Systems for the Indirect Effects of Lightning | |
| Vacuum Bagging of Thermosetting Composite Repairs | |
| Weights, Tube Fitting, Estimating, Weighing and Maintaining, Procedure for |
| << Prev | Next >> |