Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
180
190
200
210
220
230
231
232
233
234
235
236
237
238
239
240
241
242
243
250
260
270
280
290
300
350
400
450
500
550
600
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARELESS TUBE END | |
| (R) Aerospace Rod Scraper Gland Design Standard | |
| (R) Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification | |
| (R) EYE BOLT, A-286 CRES, 1000 \xb0F | |
| (R) FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE | |
| (R) FITTING ASSY, ELBOW, REDUCER, 45\xb0, SWIVEL, REDUCED BODY, FLARELESS | |
| (R) FITTING ASSY, ELBOW, REDUCER, 90 DEGREES, SWIVEL, REDUCED BODY, FLARELESS | |
| (R) FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS | |
| (R) FITTING ASSY, TEE, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| (R) FITTING ASSY,CROSS, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| (R) FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING, BEAM SEAL, MALE BULKHEAD TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC | |
| (R) FITTING, CAP ASSEMBLY, BEAM SEAL, HYDRAULIC | |
| (R) FITTING, CROSS, BEAM SEAL | |
| (R) Fitting, Elbow, 45 Degree, Beam Seal Bulkhead | |
| (R) Fitting, Elbow, 45 Degree, Bulkhead, External Thread, Beam Seal to Integral Weld Ring | |
| (R) Fitting, Elbow, 45 Degree, External Thread, Beam Seal to Integral Weld Ring | |
| (R) FITTING, ELBOW, 45\xb0, BEAM SEAL BULKHEAD | |
| (R) FITTING, ELBOW, 45\xb0, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING, ELBOW, 45\xb0, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) Fitting, Elbow, 90 Degree, Beam Seal Bulkhead | |
| (R) Fitting, Elbow, 90 Degree, Bulkhead, External Thread, Beam Seal to Integral Weld Ring | |
| (R) Fitting, Elbow, 90 Degree, External Thread, Beam Seal to Integral Weld Ring | |
| (R) FITTING, ELBOW, 90\xb0, BEAM SEAL BULKHEAD | |
| (R) FITTING, ELBOW, 90\xb0, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING, ELBOW, 90\xb0, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| (R) FITTING, PLUG, BEAM SEAL, HYDRAULIC | |
| (R) FITTING, TEE, BEAM SEAL | |
| (R) FITTING, UNION, BEAM SEAL | |
| (R) FITTING, UNION, BULKHEAD BEAM SEAL | |
| (R) FITTING, UNION, REDUCER, BEAM SEAL | |
| (R) Fuel Flow Rate Measurement System | |
| (R) Gas Turbine Engine Performance Presentation for Computer Programs Using Fortran | |
| (R) T-Bolt and Eye Bolt, A-286 CRES, 1,000 \xb0F Fatigue Rated | |
| (R) T-BOLT, A-286, 1000 \xb0F BUSHING HEAD | |
| (R) T-BOLT, A-286, 1000 \xb0F | |
| (R) Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting | |
| (R) WRENCHES; FLARE NUT, CROWFOOT, 6- AND 12-POINT NON-DISTORTING | |
| Acoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones | |
| Adapter - Port Connection, Ring Locked Design, Installation and Removal of 8000 psi Systems | |
| ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARELESS TUBE END | |
| Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be use in severe climatic conditions | |
| Aerospace Rod Scraper Gland Design Standard | |
| Air Data Computer, MPS | |
| Analysis of serum and plasma for trace elements, Method 1: Determination of aluminium content - Graphite furnace atomic absorption spectrometric method | |
| Analysis of urine for trace elements, Part 2: Determination of copper, cadmium and lead - Flame atomic absorption spectrometric method | |
| Articulated vehicles - Design criteria for fifth wheel skid plates | |
| Assembly of Stowage for Parachute Pack | |
| Automatic sliding door assemblies | |
| Automotive repairs - Code of practice for reconditioning reciprocating spark ignition engines | |
| Boat and ship design and construction - Aluminium construction | |
| Boat and ship design and construction - Design loadings | |
| Boat and ship design and construction - Fibre-reinforced plastics construction | |
| Bolt - Detail - Accumulator Attachment | |
| Bolt Assembly - Attachment of Lead-Acid Accumulators (AS166/167) | |
| Bottom Bracket - Parachute Stowage | |
| Cable Assembly, Retaining | |
| CAP, THREAD PROTECTOR - SINGLE AND DUAL PROPELLER SHAFTS | |
| Caps - Short, Protection, Metric Thread | |
| Caravan and light trailer towing components - 50 mm towballs | |
| Caravan and light trailer towing components - Coupling body for ball couplings | |
| Caravan and light trailer towing components - Electrical connectors | |
| Caravan and light trailer towing components - Safety chains up to 3500 kg capacity | |
| Caravan and light trailer towing components - Towbars and towing brackets | |
| CARBON MONOXIDE DETECTOR INSTRUMENTS | |
| CLAMP, CUSHIONED, METRIC PIPE | |
| Clamp, Loop, Bonding, Metric | |
| Clamp, Loop-Cushioned, Integral Lock | |
| Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities | |
| Coal preparation, Part 1.1: Higher rank coal - Float and sink testing | |
| Coal preparation, Part 1: Higher rank coal - Float and sink testing | |
| Coal preparation, Part 2.1: Higher rank coal - Froth flotation - Basic test | |
| Coal preparation, Part 2.2: Higher rank coal - Froth flotation - Sequential procedure | |
| Coal preparation, Part 3: Magnetite for coal preparation plant use - Test methods | |
| Coal preparation, Part 4: Flowsheets and symbols | |
| Coal preparation, Part 6: Determination of dust/moisture relationship for coal | |
| Coal preparation, Part 7: Coal size classifying equipment - Performance evaluation | |
| Coal preparation, Part 8: Sample pre-treatment - Drop-shatter | |
| Code of ethics and procedures for the selection of consultants | |
| Code of tendering | |
| Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification | |
| Color-Coded Incandescent Flange Base T1 and T1-3/4 Lamps for Voltage Identification | |
| Compressed digital videoconferencing - Up to 2 Mbit/s | |
| Contractile Strain Ratio Testing of Titanium Hydraulic Tubing | |
| Conveyor belts - Determination of strength of mechanical fastenings, Part 1: Static test method | |
| Cord Assembly, Retaining (Terylene) | |
| Coupling Assemblies, Hydraulic, Self-Sealing, Quick Disconnect 5000 and 8000 Pounds per Square Inch, Gage | |
| Coupling Assemblies, Hydraulic, Self-Sealing, Quick Disconnect 8000 Pounds Per Square Inch, Gage | |
| CROSS, REDUCED BODY, FLARELESS | |
| CROSS, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| CROSS, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| Customer/utility information exchange, Part 1: System architecture and functionality | |
| Customer/utility information exchange, Part 2: Applications and performance | |
| Customer/utility information exchange, Part 3: Customer premises interfaces | |
| Determination of platinum and palladium in gold and gold bearing alloys - Flame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods) | |
| Drift loss from cooling towers - Laboratory measurement - Chloride balance method | |
| Earth-moving machinery and ancillary equipment for use in mines - Electrical wiring systems at extra-low voltage | |
| ELBOW, 45 DEGREE BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| Elbow, 45 Degree, Bulkhead, Reduced Body, Flareless | |
| Elbow, 45 Degree, Swivel, Reduced Body, Flareless | |
| ELBOW, 45\xb0 BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| ELBOW, 45\xb0, SWIVEL, REDUCED BODY, FLARELESS | |
| Elbow, 90 Degree, Bulkhead, Reduced Body, Flareless | |
| ELBOW, 90 DEGREE, BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| Elbow, 90 Degree, Reduced Body, Flareless | |
| ELBOW, 90 DEGREE, REDUCER AND STANDARD, REDUCED BODY, FLARELESS | |
| Elbow, 90 Degree, Swivel, Reduced Body, Flareless | |
| ELBOW, 90\xb0, BULKHEAD, REDUCED BODY, FLARELESS | |
| ELBOW, 90\xb0, BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| ELBOW, 90\xb0, REDUCED BODY, FLARELESS | |
| ELBOW, 90\xb0, REDUCER AND STANDARD, REDUCED BODY, FLARELESS | |
| ELBOW, 90\xb0, SWIVEL, REDUCED BODY, FLARELESS | |
| Electromagnetic door holders | |
| Electroplated coatings - Tin and tin alloys | |
| Emergency responses for health care facilities | |
| Exercise cycles - Safety requirements | |
| Eye Bolt, A-286, 1000 Degrees F | |
| Fibre ropes, Part 1: Care and safe usage | |
| Fibre ropes, Part 2: Three-strand hawser-laid and eight-strand plaited | |
| Fibre ropes, Part 3: Man-made fibre rope for static life rescue lines | |
| Fibre-reinforced concrete pipes and fittings | |
| Fire protection - Fire extinguishing media - Carbon dioxide | |
| Fire protection - Fire extinguishing media - Halogenated hydrocarbons, Part 1: Specifications for halon 1211 and halon 1301 | |
| Fire protection - Fire extinguishing media - Halogenated hydrocarbons, Part 2: Code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 | |
| Fire sprinkler systems, Part 1.1: Components - Sprinklers and sprayers | |
| Fire sprinkler systems, Part 1.2: Components - Alarm valves (wet) | |
| Fire sprinkler systems, Part 1.3: Components - Water motor alarms | |
| Fire sprinkler systems, Part 1.4: Components - Valve monitors | |
| Fire sprinkler systems, Part 1.5: Components - Deluge and pre-action valves | |
| Fire sprinkler systems, Part 1.6: Components - Stop valves and non-return valves | |
| Fire sprinkler systems, Part 1.7: Components - Alarm valves (dry) | |
| Fire sprinkler systems, Part 1.8: Components - Pressure-reducing valves | |
| Fire sprinkler systems, Part 2.1: Piping - General | |
| FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 8000 PSI | |
| FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE | |
| FITTING ASSY, ELBOW, REDUCER, 45\xb0, SWIVEL, REDUCED BODY, FLARELESS | |
| FITTING ASSY, ELBOW, REDUCER, 90 Degrees, SWIVEL, REDUCED BODY, FLARELESS | |
| FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS | |
| FITTING ASSY, TEE, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| FITTING ASSY,CROSS, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| FITTING END ASSEMBLY, INTERNAL THREAD, RETAINED NUT, BEAM SEAL, DESIGN STANDARD | |
| FITTING END, BULKHEAD, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD | |
| FITTING END, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD | |
| Fitting, Adapter, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Adapter, Beam Seal, Swivel Nut, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Adapter, Bulkhead, External Thread, Beam Seal to Integral Weld Ring | |
| FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| FITTING, BEAM SEAL, FEMALE TUBE END, INTERNAL SWAGE, 4000 PSI, HYDRAULIC | |
| Fitting, Beam Seal, Male Bulkhead Tube End, Internal Swage, 4000 psi, Hydraulic | |
| Fitting, Cap Assembly, Beam Seal, Female, 4000 psi, Hydraulic | |
| FITTING, CROSS, BEAM SEAL | |
| Fitting, Elbow, 45 Degree, Beam Seal Bulkhead | |
| Fitting, Elbow, 45 Degree, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Elbow, 45 Degree, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Elbow, 45 Degree, Bulkhead, External Thread, Beam Seal to Integral Weld Ring | |
| Fitting, Elbow, 45 Degree, External Thread, Beam Seal to Integral Weld Ring | |
| FITTING, ELBOW, 45\xb0, BEAM SEAL BULKHEAD | |
| FITTING, ELBOW, 45\xb0, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| FITTING, ELBOW, 45\xb0, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| Fitting, Elbow, 90 Degree, Beam Seal Bulkhead | |
| Fitting, Elbow, 90 Degree, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Elbow, 90 Degree, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi | |
| Fitting, Elbow, 90 Degree, Bulkhead, External Thread, Beam Seal to Integral Weld Ring | |
| Fitting, Elbow, 90 Degree, External Thread, Beam Seal to Integral Weld Ring | |
| FITTING, ELBOW, 90\xb0, BEAM SEAL BULKHEAD | |
| FITTING, ELBOW, 90\xb0, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| FITTING, ELBOW, 90\xb0, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING | |
| Fitting, Plug, Beam Seal, Hydraulic | |
| FITTING, TEE, BEAM SEAL | |
| Fitting, Union, Beam Seal | |
| FITTING, UNION, BULKHEAD BEAM SEAL | |
| Fitting, Union, Bulkhead, Beam Seal | |
| Fitting, Union, Reducer, Beam Seal | |
| Flexible Strapping | |
| Flight Directors (Reciprocating Engine Powered Aircraft) | |
| Fuel Flowmeters | |
| Gas recovery or combined recovery and recycling equipment, Part 1: Automotive air-conditioning systems | |
| Gas recovery or combined recovery and recycling equipment, Part 1: Fluorocarbon refrigerants from automotive airconditioning systems | |
| Gas recovery or combined recovery and recycling equipment, Part 3: Fluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems | |
| Gas Turbine Engine Performance Presentation for Computer Programs Using FORTRAN | |
| Gaseous fire extinguishing systems - Carbon dioxide systems | |
| Gaseous fire extinguishing systems - FE-13 (HFC-23) total flooding systems | |
| Gaseous fire extinguishing systems - FM-200 (HFC-227ea) Systems | |
| Gaseous fire extinguishing systems - General requirements | |
| Gaseous fire extinguishing systems - Inergen (IG-541) total flooding systems | |
| Gaseous fire extinguishing systems - NAF S-III (HCFC Blend A) Total flooding systems | |
| Gaseous fire extinguishing systems - Triodide (FIC-13I1) total flooding systems | |
| Gaseous fire extinguishing systems | |
| General access floors (elevated floors) | |
| General conditions for engagement of consultants | |
| General conditions of contract for engagement of consultants | |
| Geographic information systems - Data dictionary for transfer of street addressing information | |
| Glassware - Guide to the use of piston operated volumetric apparatus (POVA) | |
| Guidelines for safe housing design | |
| Hand torque tools | |
| Headstones and cemetery monuments | |
| High pressure water jetting systems, Part 1: Safe operation and maintenance | |
| High pressure water jetting systems, Part 2: Construction and performance | |
| HIGH SPEED RING BUS (HSRB) STANDARD | |
| Hose Assembly, Polytetrafluoroethyl ene, Heavy Duty, Metallic Reinforced, 400 \xb0F, 5000 psi Hydraulic and Pneumatic | |
| Hose Assembly, Polytetrafluoroethyl ene, Heavy Duty, Metallic Reinforced, 400 Degrees F, 5000 psi Hydraulic and Pneumatic | |
| Illuminated flashing arrow signs | |
| Information and documentation - Open Systems Interconnection - Interlibrary loan application protocol specification, Part 1: Protocol specification | |
| Information and documentation - Open Systems Interconnection - Interlibrary loan application service definition | |
| Information processing systems - Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side - ISO Type... | |
| Information technology - 130 mm rewritable optical disk cartridge for information interchange | |
| Information technology - Telecommunications and information exchange between systems - Numbering and sub-addressing in private integrated services networks | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit mode bearer services - Inter-exchange signalling procedures and protocol | |
| Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows | |
| Information technology - Telecommunications and information exchange between systems - Synchronization methods and technical requirements for private integrated services networks | |
| Insulating covers for electrical purposes | |
| Keep Ring (for Bolt Assembly) | |
| Laundry practice | |
| Linear Token Passing Multiplex Data Bus | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters, Part 1: General principles | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters, Part 2: Pipe provers | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters, Part 3: Pulse interpolation techniques | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters, Part 4: Temperature corrections in volumetric calibration by water transfer method | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters, Part 5: Dynamic measurement | |
| Locksets - Glossary of terms | |
| Locksets - Mechanical locksets for doors in buildings | |
| Locksets and hardware for doors and windows, Part 5: Controlled door closing devices (EN 1154:1996, MOD) | |
| Locksets, Part 3: Mechanical locksets for windows in buildings | |
| Locksets, Part 4: Padlocks | |
| Manifold Pressure Indicating Instruments | |
| Maximum Allowable Air-Speed Instruments (Reciprocating Engine Powered Aircraft) | |
| MAXIMUM ALLOWABLE AIRSPEED INSTRUMENTS (RECIPROCATING ENGINE POWERED AIRCRAFT) | |
| Measurement of drift loss from cooling towers, Part 2: Lost chloride method | |
| Metal finishing - Glossary of terms used in electroplating and related processes | |
| Metallic flanges for waterworks purposes | |
| Metering and utility information exchange - Glossary of terms | |
| Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations | |
| Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations | |
| Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases, Part 0: General introduction and list of methods | |
| Methods of test for fibre ropes - Resistance to abrasion | |
| Methods of test for fibre ropes - Resistance to flexion and surface abrasion | |
| Methods of test for fibre ropes, Method 1: Dimensions, linear density, breaking force and elongation | |
| Methods of test for fibre ropes, Method 2: Knotability and knot breaking force | |
| Methods of test for fibre ropes, Method 3: Sheath slippage | |
| Methods of test for fibre ropes, Method 4: Impact strength index | |
| Methods of test for fibre ropes, Part 6: Resistance to abrasion | |
| Methods of testing raw materials for producing urea-formaldehyde foam thermal insulation, Method 2: Determination of the viscosity of the resin | |
| Methods of testing raw materials for producing urea-formaldehyde foam thermal insulation, Method 3: Determination of the free formaldehyde content of the resin | |
| Methods of testing raw materials for producing urea-formaldehyde foam thermal insulation, Method 4: Determination of the reactivity of the resin | |
| Methods of testing raw materials for producing urea-formaldehyde foam thermal insulation, Method 5: Determination of the water tolerance of the resin | |
| Methods of testing raw materials for producing urea-formaldehyde foam thermal insulation, Method 6: Determination of the acidity of the foaming agent concentrate | |
| Methods of testing rocks for engineering purposes, Method 1.1.1: Rock moisture content tests - Determination of the moisture content of rock - Oven drying method (standard method) | |
| Methods of testing rocks for engineering purposes, Method 1.1.1: Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and calliper techniques | |
| Methods of testing rocks for engineering purposes, Method 2.1.2: Rock porosity and density tests - Determination of rock porosity and dry density - Saturation and buoyancy techniques | |
| Methods of testing rocks for engineering purposes, Method 3.1: Rock swelling and slake durability tests - Determination of the swelling strain developed in an unconfined rock specimen | |
| Methods of testing rocks for engineering purposes, Method 3.2: Rock swelling and slake durability tests - Determination of the swelling strain for a radially confined specimen with axial surcharge | |
| Methods of testing rocks for engineering purposes, Method 3.3: Rock swelling and slake durability tests - Determination of the swelling pressure index under conditions of zero volume change | |
| Methods of testing rocks for engineering purposes, Method 3.4: Rock swelling and slake durability tests - Determination of the slake durability index of rock samples | |
| Methods of testing rocks for engineering purposes, Method 4.1: Rock strength tests - Determination of point load strength index | |
| Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests - Determination of uniaxial compressive strength of 50 MPa and greater | |
| Methods of testing rocks for engineering purposes, Method 4.2.2: Rock strength tests - Determination of uniaxial compressive strength - Rock strength less than 50 MPa | |
| Methods of testing rocks for engineering purposes, Method 4.2: Rock strength tests - Determination of uniaxial compressive strength | |
| Methods of testing rocks for engineering purposes, Method 4.3.1: Rock strength tests - Determination of deformability of rock materials in uniaxial compression - Strengths of 50 MPa and greater | |
| Methods of testing rocks for engineering purposes, Method 4.3.2: Rock strength tests - Determination of the deformability of rock materials in uniaxial compression - Rock strength less than 50 MPa... | |
| Methods of testing rocks for engineering purposes, Method 4.3: Rock strength tests - Determination of deformability of rock materials in uniaxial compression | |
| Methods of testing rocks for engineering purposes, Method 5: Sampling of rock core | |
| Methods of testing rocks for engineering purposes, Part 0: General requirements and list of methods | |
| Mobile waste containers, Part 1: Containers with two wheels and a capacity up to 400 L for lifting devices - Dimensions and design | |
| Mobile waste containers, Part 2: Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices - Dimensions and design... | |
| Mobile waste containers, Part 3: Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices - Dimensions and design... | |
| Mobile waste containers, Part 4: Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting... | |
| Mobile waste containers, Part 5: Performance requirements and test methods | |
| Mobile waste containers, Part 6: Health, safety and environment | |
| Mobile waste containers, Part 7: Colours, markings, and designation requirements | |
| Multilayer pipes for pressure applications, Part 1: Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD) | |
| Multilayer pipes for pressure applications, Part 2: Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) | |
| Multilayer pipes for pressure applications, Part 3: Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) | |
| Multilayer pipes for pressure applications, Part 5: Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD) | |
| Multilayer pipes for pressure applications, Part 7: Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD) | |
| Multilayer pipes for pressure applications, Part 8: Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for... | |
| Nut Ring (for Drain Valve) | |
| NUT, CLIP, SELF-LOCKING, FLOATING, ASSEMBLY OF | |
| Nut, Self-Locking, Shaft | |
| NUTS, SELF-LOCKING, ASSEMBLY OF | |
| Optical Implementation Relating to the High Speed Ring Bus (HSRB) Standard | |
| Optical Implementation Relating to the High Speed Ring Bus (HSRB) | |
| PE pipes, pressure applications | |
| Pennant | |
| Pliable building membranes and underlays, Part 1: Materials | |
| Pliable building membranes and underlays, Part 2: Installation | |
| Plug (for Fuel Drain Valve) | |
| Plugs, Protection, Metric Threads | |
| Polarimeters - Sugar - Automatic | |
| Polyethylene/alumini um and cross-linked polyethylene/alumini um macro-composite pipe systems for pressure applications | |
| Port - Ring Locked Fluid Connection Type 8000 psi, Standard Dimensions for | |
| Port - Ring Locked Fluid Connection Type 8000 psi | |
| Portable traffic signal systems | |
| Precast concrete access chambers for sewerage applications | |
| Pressure Instruments - Fuel, Oil and Hydraulic (Reciprocating Engine Powered Aircraft) | |
| Pressure Instruments - Fuel, Oil and Hydraulic | |
| Pressure Instruments- Fuel, Oil, and Hydraulic (Reciprocating Engine Powered Aircraft) | |
| Priming paint for steel - Single component - General purpose | |
| Production Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals | |
| Production Test Plan for the Time Division Command/Response Multiplex Data Bus Bus Controllers | |
| Programmable controllers - Equipment requirements and tests | |
| Programmable controllers - General information | |
| Programmable controllers - Programming languages | |
| PROPELLER SHAFT ENDS - SINGLE ROTATION | |
| Propeller Shaft Ends- Single Rotation | |
| Recycled paper - Glossary of terms | |
| Rod Scraper Gland Design Standard | |
| Rolling bearings - Static load ratings | |
| Rolling bearings - Vocabulary | |
| Screwcap bottles for microbiological use (McCartney bottles) | |
| Seals, for use with Cap & Plugs Protection, Metric | |
| Secondary batteries for use with stand-alone power systems, Part 1: General requirements | |
| Secondary batteries for use with stand-alone power systems, Part 2: Installation and maintenance | |
| Sheet and Strip Surface Finish Nomenclature | |
| Single use (sterile) rubber surgical gloves | |
| Solar water heaters - Domestic and heat pump - Calculation of energy consumption | |
| Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management | |
| Spark Igniter Outline Flange Mounting | |
| Spark Igniter Outline Right Angle Flange Mounting | |
| Spark Igniter Outline Threaded Mounting | |
| Specification for an Automated Interchange of Standards Data | |
| Spiral Wrapping, Nylon | |
| Spiral Wrapping, P.T.F.E. | |
| Stainless steel clamps for waterworks purposes | |
| Starters for fluorescent lamps - Performance requirements | |
| Steel storage racking - Commentary (Supplement to AS 4084-1993) | |
| Steel storage racking Part 2: Operation and maintenance | |
| Steel storage racking, Part 1: Design | |
| Steel storage racking | |
| Steel structures - Commentary (Supplement to AS 4100-1990) | |
| Steel structures | |
| Streamer, Warning | |
| Stud Stepped, (.3125 24 UNJF-3AMOD to .250 28 UNJF-3A BS4084) | |
| Stud Stepped, (.3125 24UNJF-3AMOD BS4084 to .2500 28UNJF-3A BS4084), BS S159 | |
| Stud Stepped, (.375 24 UNJF-3AMOD to .3125 24UNJF-3A BS4084) | |
| Stud Stepped, (.375 24UNJF-3AMOD BS4084 to .3125 24UNJF-3A BS4084), BS S159 | |
| Surge suppression devices for telecommunication applications | |
| Synthetic shadecloth | |
| T-Bolt and Eye Bolt, A-286 Cres, 1000 Degrees F Fatigue Rated | |
| T-Bolt and Eye Bolt, A286 CRES, 1000 \xb0F Fatigue Rated | |
| T-Bolt, A-286, 1000 Degrees F Bushing Head | |
| T-Bolt, A-286, 1000 Degrees F | |
| TAG, ATTACHMENT | |
| TEE, BULKHEAD ON RUN, REDUCED BODY, FLARELESS | |
| TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| TEE, BULKHEAD ON SIDE, REDUCED BODY, FLARELESS | |
| TEE, BULKHEAD ON SIDE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| TEE, REDUCED BODY, FLARELESS | |
| TEE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS | |
| TEE, SWIVEL ON RUN, REDUCED BODY, FLARELESS | |
| TEE, SWIVEL ON SIDE, REDUCED BODY, FLARELESS | |
| Temperature Instruments (Reciprocating Engine Powered Aircraft) | |
| Temperature Instruments (Turbine Powered Subsonic Aircraft) | |
| Test methods for general access floors, Method 10: Test for dynamic soft body impact | |
| Test methods for general access floors, Method 11: Test for dynamic rolling loads with the tread made from resinous polymer | |
| Test methods for general access floors, Method 12: Test for pedestal strength by concentrated vertical load | |
| Test methods for general access floors, Method 13: Test for pedestal free movement by horizontal load | |
| Test methods for general access floors, Method 14: Test for pedestal strength by horizontal moment | |
| Test methods for general access floors, Method 1: Test for concavity and convexity | |
| Test methods for general access floors, Method 2: Test for twist | |
| Test methods for general access floors, Method 3: Test for panel squareness | |
| Test methods for general access floors, Method 4: Test for the effect of temperature | |
| Test methods for general access floors, Method 5: Test for the effect of humidity | |
| Test methods for general access floors, Method 6: Test for floor resistance for electrostatic control | |
| Test methods for general access floors, Method 7: Test for 300 mm x 300 mm concentrated load | |
| Test methods for general access floors, Method 8: Test for 25 mm x 25 mm concentrated load | |
| Test methods for general access floors, Method 9: Test for ultimate test load (safety factor tests for concentrated load) | |
| Test methods for general access floors, Part 0: Introduction and list of methods | |
| Test Plan for the Digital Time Division Command/ Response Multiplex Data Bus Couplers, Terminators, and Data Bus Cables | |
| Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Monitors | |
| Test Plan for The Digital Time Division Command/Response Multiplex Data Bus Couplers, Terminators, and Data Bus Cables | |
| Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Monitors | |
| TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS SYSTEM | |
| The storage, handling and transport of liquid and liquefied polyfunctional isocyanates | |
| Timber - Stumps and sole plates | |
| Top Bracket - Parachute Stowage | |
| Traffic signal lamps - Lamps for 240 V a.c. operation | |
| Traffic signal lamps, Part 2: Lamps for a.c. operation at extra-low voltage | |
| Tray, Accumulator, 12 Volt 15 & 25 AH | |
| Tray, Accumulator, 12 Volt 40 AH | |
| Tungsten filament lamps for general service - Safety requirements | |
| Type E-1 Electrical Media Interface Characteristics | |
| Type F-2 Fiber Optic Media Interface Characteristics | |
| Urea-formaldehyde foam thermal insulation - Installation requirements for in situ set foam | |
| User terminals for accessing the mobilesat satellite communications system | |
| Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Controllers | |
| Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals | |
| Value Management | |
| Valve Lifter for Fuel Drain Valve | |
| Washer Plate - Accumulator Attachment | |
| Washer, Joint | |
| Whole blood - Determination of lead content - Graphite furnace atomic absorption spectrometric method | |
| Withdrawal Ring, Fuel Drain Valve | |
| Wool - Glossary of terms relating to the testing of raw wool | |
| Wrenches; Flare Nut, Crowfoot, 12-Point Nondistorting |
| << Prev | Next >> |