Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1330
1340
1350
1360
1370
1380
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| "PP" & "S" Certification Marks - Pressure Piping and Power Boilers - Certification & Accreditation Package - Required Code Books - BPVC I, BPVC II A, BPVC II B, BPVC... | |
| 11 Standards for teachers and students of structural design | |
| A guide for schools and colleges to BS 8888:2006, Technical Product Specification (TPS) | |
| A guide for schools and colleges to BS 8888:2006, Technical Product Specification | |
| A Primer on Operational Aids (For Cranes) | |
| AASHTO Project Oversight Task Force Report | |
| Abbreviated Piping Terms and Acronyms | |
| Aboveground Reinforced Thermosetting Resin (RTR) Piping System Requirements | |
| Anthropometrics An Introduction | |
| Attenuation Due to Clouds and Fog | |
| BACON, SLICED, CHILLED OR FROZEN | |
| BACON, SLICED, PRECOOKED | |
| Ball Valve Data Sheet and Standard Terms | |
| Ball Valve Electronic Entry Data Sheet and Standard Terms | |
| BEEF IN BARBECUE SAUCE, THERMOSTABILIZED, TRAY PACK | |
| BEEF POT ROAST, WITH GRAVY, THERMOSTABILIZED, TRAY PACK | |
| BEEF STEW, THERMOSTABILIZED, TRAY PACK | |
| BEEF STRIPS, WITH GREEN PEPPERS AND GRAVY, THERMOSTABILIZED, TRAY PACK | |
| BEEF TIPS WITH GRAVY, THERMOSTABILIZED, TRAY PACK | |
| BEEF, CANNED, CORNED | |
| BEEF, CORNED, CHILLED OR FROZEN, BULK | |
| BEEF, FRESH, CHILLED OR FROZEN | |
| BEEF, GROUND, CREAMED, THERMOSTABILIZED, TRAY PACK | |
| BEEF: DRIED, CHILLED OR FROZEN | |
| BOLOGNA, CHILLED AND FROZEN | |
| BOLOGNA, CHILLED OR FROZEN, LEBANON STYLE | |
| Bronze and Iron Ball Valve Descriptions | |
| Bronze and Iron Butterfly Valve Descriptions | |
| Bronze and Iron Check Valve Descriptions | |
| Bronze and Iron Gate Valve Descriptions | |
| Bronze and Iron Globe Valve Descriptions | |
| Butterfly Valve Data Sheet and Standard Terms | |
| Butterfly Valve Electronic Entry Data Sheet and Standard Terms | |
| CANADIAN BACON WITH BRINE, THERMOSTABILIZED, TRAY PACK | |
| CANADIAN STYLE BACON, CHILLED OR FROZEN | |
| Carbon Steel Ball Valve Descriptions | |
| Carbon Steel Butterfly Valve Descriptions | |
| Carbon Steel Check Valve Descriptions | |
| Carbon Steel Gate Valve Descriptions | |
| Carbon Steel Globe Valve Descriptions | |
| Carbon Steel Plug Valve Descriptions | |
| Characteristics of Precipitation for Propagation Modelling | |
| Check Valve Data Sheet and Standard Terms | |
| Check Valve Electronic Entry Data Sheet and Standard Terms | |
| CHICKEN A LA KING, THERMOSTABILIZED, TRAY PACK | |
| CHICKEN CACCIATORE, THERMOSTABILIZED, TRAY PACK | |
| CHICKEN OR TURKEY, CANNED, BONED | |
| CHICKEN SLICES IN GRAVY, THERMOSTABILIZED, TRAY PACK | |
| CHICKEN, FROZEN, COOKED, BONELESS, DICED OR CHUNKED | |
| CHICKENS AND CHICKEN PARTS, READY-TO-COOK, CHILLED AND FROZEN | |
| CLAMS, CANNED | |
| CLAMS, CHILLED, FRESH AND FROZEN: SHUCKED | |
| Compendium of British Standards for Design and Technology in Schools | |
| Construction Drawing Practice for Schools | |
| Construction Drawing Practice for Universities, Polytechnics and Colleges | |
| COSMETIC RAW MATERIALS. PEG-3 DISTEARATE. | |
| CRAB MEAT, COOKED: CHILLED AND FROZEN | |
| CRAB MEAT; CANNED | |
| Design and Technology. Compendium of British Standards for teachers of design and technology in schools and colleges | |
| Design Considerations When Using Reclaimed Asphalt Shingles in New Hot-Mix Asphalt | |
| Design of ASME B31.3 Metallic Piping Systems | |
| Design. Safe Machinery (CD) | |
| Designing safe machinery. Guidance for higher education to the standards and regulations (book and CD) | |
| Designing safe machinery. Guidance for higher education to the standards and regulations | |
| Diaphragm Valve Data Sheet and Standard Terms | |
| Diaphragm Valve Electronic Entry Data Sheet and Standard Terms | |
| Draft American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT) Security-Screening Systems | |
| Draft Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security | |
| Draft Standard for Radiation Protection, Instrumentation Test, and Calibration of Portable Survey Instruments | |
| DUCK, GOOSE, GUINEA AND SQUAB, CHILLED AND FROZEN (READY-TO-COOK) | |
| Effects of Different Sample Types on Glucose Measurements | |
| Electronic Entry Data Sheet for Pipe Weld Data Sheet (PWDS) Instructions | |
| Emergency and Disaster Point-of-Care Testing | |
| Engineering Drawing Practice for Schools and Colleges | |
| Engineering drawing practice. a guide for further and higher education to BS 8888:2006, Technical product specification (TPS) | |
| Engineering drawing practice: a guide for further and higher education to BS 8888:2006, Technical product specification (TPS) | |
| Ergonomics-Standards and Guidelines for Designers | |
| Essential Tools for Implementation and Management of a Point-of-Care Testing Program | |
| Estimating the Cracking Tendency of Concrete | |
| Evaluating the Engineering and Environmental Suitability of Recycled Materials | |
| Extracts from British Standards for Students of Structural Design | |
| Extracts from the Structural Eurocodes for students of structural design | |
| Fabrication and Examination Specification for ASME B31.3 Metallic Piping | |
| FASTENER PRACTICE/PROCEDURE - BEST PRACTICES AND COMPLEXITY REDUCTION | |
| FISH STICKS AND PORTIONS, FROZEN, RAW, BREADED | |
| FISH: CHILLED AND FROZEN | |
| FRANKFURTERS IN BRINE, THERMOSTABILIZED, TRAY PACK | |
| FRANKFURTERS, CANNED | |
| FRANKFURTERS, CHILLED AND FROZEN | |
| Gate Valve Data Sheet and Standard Terms | |
| Gate Valve Electronic Entry Data Sheet and Standard Terms | |
| Geometrical Tolerancing an Introduction | |
| Geometrical Tolerancing Solutions to Exercises in Geometrical Tolerancing | |
| Globe Valve Data Sheet and Standard Terms | |
| Globe Valve Electronic Entry Data Sheet and Standard Terms | |
| Glucose Monitoring in Settings Without Laboratory Support; Approved Guideline | |
| Glucose Monitoring in Settings Without Laboratory Support | |
| Graphical Symbols for Use in Schools and Colleges | |
| GROUND BEEF PRODUCTS, FROZEN | |
| GUIA DE BOLSILLO DE ASHRAE para Aire Acondicionado, Calefacci\xf3n, Ventilaci\xf3n, Refrigeraci\xf3n (Edici\xf3n I-P y SI) | |
| Guidance on Restoring Potable Water Piping Systems Post-Urban-Wildland Wildfires | |
| HAM SLICES, THERMOSTABILIZED, TRAY PACK | |
| HAM, CANNED; CURED | |
| HASH; CORNED BEEF, CANNED | |
| Installation of ASME B31.3 Metallic Piping | |
| Installation of High Density Polyethylene (HDPE) Piping | |
| Introduction to the Tolerancing of Functional Length Dimensions | |
| Jacketed Piping Fabrication and Installation Details | |
| Language of Labels | |
| Leak Testing of Piping Systems | |
| Low and Intermediate Alloy Steel Check Valve Descriptions | |
| Low and Intermediate Alloy Steel Gate Valve Descriptions | |
| Low and Intermediate Alloy Steel Globe Valve Descriptions | |
| Match Curing of Concrete Test Specimens | |
| Materials Testing | |
| Miscellaneous Metals Ball Valve Descriptions | |
| Miscellaneous Metals Butterfly Valve Description | |
| Miscellaneous Metals Check Valve Descriptions | |
| Miscellaneous Metals Plug Valve Descriptions | |
| Needle Valve Data Sheet and Standard Terms | |
| Needle Valve Electronic Entry Data Sheet and Standard Terms | |
| Nickel and Nickel Alloy Ball Valve Descriptions | |
| Nickel and Nickel Alloy Check Valve Descriptions | |
| Nickel and Nickel Alloy Gate Valve Descriptions | |
| Nickel and Nickel Alloy Globe Valve Descriptions | |
| Nickel and Nickel Alloy Other Valve Descriptions | |
| Nickel and Nickel Alloy Plug Valve Descriptions | |
| Operating Walkdowns of Power Plants | |
| PAPER, ABRASIVE (FLINT) | |
| PAPER, ABRASIVE, GARNET | |
| PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF | |
| PEN CLEANER, LIQUID | |
| Performance Metrics for Continuous Interstitial Glucose Monitoring; Approved Guideline | |
| Performance Metrics for Continuous Interstitial Glucose Monitoring | |
| Performance-Related Outage Inspections | |
| Physician and Nonphysician Provider-Performed Microscopy Testing; Approved Guideline | |
| Pipe Support Criteria for ASME B31.3 Metallic Piping | |
| Pipe Supports Details | |
| Pipe Weld Data Sheet (PWDS) Instructions (Universally Applicable) | |
| Piping Examination and Leak Test Guide | |
| Piping Flexibility Analysis Criteria for ASME B31.3 Metallic Piping | |
| Piping Line Class Designator System | |
| Piping Material Specification 12CG0T01 Class 125, Galvanized Carbon Steel, 0.000" C.A. Utility (Air & Water), Category D | |
| Piping Material Specification 12CS1B01 Class 175 psi, Carbon Steel, Coated, 0.063" C.A. Firewater (Underground) | |
| Piping Material Specification 12CS1G01 Class 125, Carbon Steel, 0.063" C.A. Utility (Air and Water), Category D Roll Grooved Joints | |
| Piping Material Specification 12CS1T01 Class 125, Carbon Steel, 0.063" C.A. Utility (Air and Water), Category D | |
| Piping Material Specification 12CS2T01 Class 125, Carbon Steel, 0.125" C.A. Utility (Air and Water), Category D | |
| Piping Material Specification 12LB0M01 Class 175, Ductile Iron, Cement-Mortar Lined Fire Water (UL/FM Approved) (Underground) | |
| Piping Material Specification 12PD0H01 FM Class 150, High Density Polyethylene (HDPE) Fire Water (UL/FM Approved) (Underground) | |
| Piping Material Specification 12PD0H02 160 PSI, High Density Polyethylene (HDPE) Utility (Underground) | |
| Piping Material Specification 15CB1S01 Class 1500, Killed Carbon Steel, 0.063" C.A. Process | |
| Piping Material Specification 15CB2S01 Class 1500, Killed Carbon Steel, 0.125" C.A. Process | |
| Piping Material Specification 15CJ1S01 Class 1500, 1-1/4 CR - 1/2 MO, 0.063" C.A. Process | |
| Piping Material Specification 15CJ1S02 Class 1500, 1-1/4 CR - 1/2 MO, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 15CK1S01 Class 1500, 2-1/4 CR - 1 MO, 0.063" C.A. Process | |
| Piping Material Specification 15CL1S01 Class 1500, 5 CR - 1/2 MO, 0.063" C.A. Process | |
| Piping Material Specification 15CM1S01 Class 1500, 9 CR - 1 MO, 0.063" C.A. Process | |
| Piping Material Specification 15CS1S01 Class 1500, Carbon Steel, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 15NY1S01 Class 1500, Alloy 800H (UNS N08810), Socket Weld, 0.063" C.A., Elevated Temperature Fluid Service, Process | |
| Piping Material Specification 15SA0S01 Class 1500, 304/304L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 15SC0S01 Class 1500, 304H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 15SD0S01 Class 1500, 316/316L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 15SJ0S01 Class 1500, 321 Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 15SJ1S01 Class 1500, 321 Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 15SK0S01 Class 1500, 321H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 15SK1S01 Class 1500, 321H Stainless Steel 0.063" C.A. Process | |
| Piping Material Specification 15SP1S01 Class 1500, 2205 Duplex SS (UNS S31803), 0.063" C.A. Process | |
| Piping Material Specification 1FPD0H01 FM Class 200, HDPE (High Density Polyethylene), C.A. \x96 None, Heat Fusion, Fire Water (UL Listed/FM Approved) (Underground) | |
| Piping Material Specification 2FLB0M01 250 PSI, Ductile Iron, Mechanical Joints, Cement-Mortar Lined Fire Water (UL Listed or FM Approved) (Underground) | |
| Piping Material Specification 2FLB0P01 250 PSI, Ductile Iron, Push-On Joints, Cement-Mortar Lined Fire Water (UL Listed or FM Approved) (Underground) | |
| Piping Material Specification 2FPD0H01 FM Class 250, HDPE (High Density Polyethylene), C.A. - None, Heat Fusion, Fire Water (UL Listed/FM Approved) (Underground) | |
| Piping Material Specification 3FPD0H01, FM Class 335, HDPE (High Density Polyethylene), C.A. - None, Heat Fusion, Fire Water (UL Listed/FM Approved) (Underground) | |
| Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 3SA0S02 Class 300, 304/304L Stainless Steel, 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, 0.000" C.A. Low Temperature Process | |
| Piping Material Specification 3SA0S04 Class 300, 304/304L Stainless Steel, 0.000" C.A. Cryogenic Process | |
| Piping Material Specification 3SC0S01 Class 300, 304H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 3SD0B02 Class 300, 316/316L Stainless Steel, 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 3SD0B03 Class 300, 316/316L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 3SD0J01 Class 300, 316/316L Stainless Steel, 0.000" C.A. Core: Process Jacket: Steam | |
| Piping Material Specification 3SD0J02 Class 300, 316/316L Stainless Steel, 0.000" C.A. Core: Process Jacket: Hot Oil | |
| Piping Material Specification 3SD0S01 Class 300, 316/316L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 3SD0S02 Class 300, 316/316L Stainless Steel, 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 3SD1B01 Class 300, 316/316L Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 3SD1B02 Class 300, 316/316L Stainless Steel, 0.063" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 3SP1S01 Class 300, 2205 Duplex SS (UNS S31803), 0.063" C.A. Process | |
| Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 50NM0L01 Alloy 400, 0.000" C.A. Process Tubing (thru ASME Class 600 Piping) | |
| Piping Material Specification 50NM0L02 Alloy 400, 0.000\x94 C.A. Process Tubing (thru ASME Class 600 Piping) (PTFE Packing/Gaskets) | |
| Piping Material Specification 50SA0L01 304/304L Stainless Steel, 0.000\x94 C.A. Process Tubing (thru ASME Class 600 Piping) | |
| Piping Material Specification 50SA0L02 304/304L Stainless Steel, 0.000\x94 C.A. Process Tubing (thru ASME Class 600 Piping) (PTFE Packing/Gaskets) | |
| Piping Material Specification 50SD0L01 316/316L Stainless Steel, 0.000\x94 C.A. Process Tubing (thru ASME Class 600 Piping) | |
| Piping Material Specification 50SD0L02 316/316L Stainless Steel, 0.000\x94 C.A. Process Tubing (thru ASME Class 600 Piping) (PTFE Packing/Gaskets) | |
| Piping Material Specification 6CA1S01 Class 600, Impact Tested Carbon Steel, 0.063" C.A. Process | |
| Piping Material Specification 6CB1S01 Class 600, Killed Carbon Steel, 0.063" C.A. Process | |
| Piping Material Specification 6CB2S01 Class 600, Killed Carbon Steel, 0.125" C.A. Process | |
| Piping Material Specification 6CJ1S01 Class 600, 1-1/4 CR - 1/2 MO, 0.063" C.A. Process | |
| Piping Material Specification 6CJ1S02 Class 600, 1-1/4 CR - 1/2 MO, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 6CK1S01 Class 600, 2-1/4 CR - 1 MO, 0.063" C.A. Process | |
| Piping Material Specification 6CL1S01 Class 600, 5 CR - 1/2 MO, 0.063" C.A. Process | |
| Piping Material Specification 6CM1S01 Class 600, 9 CR - 1 MO, 0.063" C.A. Process | |
| Piping Material Specification 6CS1S01 Class 600, Carbon Steel, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 6NM0B02 Class 600, Alloy 400 (UNS N04400), 0.000" C.A. Oxygen | |
| Piping Material Specification 6NY1S01 Class 600, Alloy 800H (UNS N08810), Socket Weld, 0.063" C.A., Elevated Temperature Fluid Service, Process | |
| Piping Material Specification 6SA0B01 Class 600, 304/304L Stainless Steel, 0.000" C.A. Lube Oil | |
| Piping Material Specification 6SA0B02 Class 600, 304/304L Stainless Steel, 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 6SA0B05 Class 600, 304/304L Stainless Steel, 0.000" C.A. Oxygen | |
| Piping Material Specification 6SA0S01 Class 600, 304/304L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 6SA0S03 Class 600, 304/304L Stainless Steel, 0.000" C.A. Low Temperature Process | |
| Piping Material Specification 6SA0S04 Class 600, 304/304L Stainless Steel, 0.000" C.A. Cryogenic Process | |
| Piping Material Specification 6SC0S01 Class 600, 304H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 6SD0B01 Class 600, 316/316L Stainless Steel, Butt Weld, 0.000" C.A. Process | |
| Piping Material Specification 6SD0B02 Class 600, 316/316L Stainless Steel, 0.000" C.A. Process (PTFE Packing/Gaskets) | |
| Piping Material Specification 6SD0S01 Class 600, 316/316L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 6SJ0S01 Class 600, 321 Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 6SJ1S01 Class 600, 321 Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 6SK0S01 Class 600, 321H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 6SK1S01 Class 600, 321H Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 6SP1S01 Class 600, 2205 Duplex SS (UNS S31803), 0.063" C.A. Process | |
| Piping Material Specification 9CB1S01 Class 900, Killed Carbon Steel, 0.063" C.A. Process | |
| Piping Material Specification 9CB2S01 Class 900, Killed Carbon Steel, 0.125" C.A. Process | |
| Piping Material Specification 9CJ1S01 Class 900, 1-1/4 CR - 1/2 MO, 0.063" C.A. Process | |
| Piping Material Specification 9CJ1S02 Class 900, 1-1/4 CR - 1/2 MO, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 9CK1S01 Class 900, 2-1/4 CR - 1 M0, 0.063" C.A. Process | |
| Piping Material Specification 9CL1S01 Class 900, 5 CR - 1/2 MO, Socket Weld, 0.063" C.A. Process | |
| Piping Material Specification 9CM1S01 Class 900, 9 CR - 1 MO, 0.063" C.A. Process | |
| Piping Material Specification 9CS1S01 Class 900, Carbon Steel, 0.063" C.A. Steam/Condensate | |
| Piping Material Specification 9NY1S01 Class 900, Alloy 800H (UNS N08810), Socket Weld, 0.063" C.A., Elevated Temperature Fluid Service, Process | |
| Piping Material Specification 9SA0S01 Class 900, 304/304L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 9SC0S01 Class 900, 304H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 9SD0S01 Class 900, 316/316L Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 9SJ0S01 Class 900, 321 Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 9SJ1S01 Class 900, 321 Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 9SK0S01 Class 900, 321H Stainless Steel, 0.000" C.A. Process | |
| Piping Material Specification 9SK1S01 Class 900, 321H Stainless Steel, 0.063" C.A. Process | |
| Piping Material Specification 9SP1S01 Class 900, 2205 Duplex SS (UNS S31803), 0.063" C.A. Process | |
| Piping Material Specification Selection, Development, and Application Guidelines | |
| Piping Material Specifications Line Class Index | |
| Piping Service Index | |
| Plant Operations Test Manual | |
| Plastic and Plastic-Lined Ball Valve Descriptions | |
| Plastic and Plastic-Lined Butterfly Valve Description | |
| Plastic and Plastic-Lined Check Valve Descriptions | |
| Plastic and Plastic-Lined Other Valve Descriptions | |
| Plastic and Plastic-Lined Plug Valve Descriptions | |
| Plug Valve Data Sheet and Standard Terms | |
| Plug Valve Electronic Entry Data Sheet and Standard Terms | |
| POCKET GUIDE for Air Conditioning Heating Ventilation, Refrigeration (I-P Edition) | |
| POCKET GUIDE for Air Conditioning, Heating, Ventilation, Refrigeration (SI Edition) | |
| Pocket Prescriber 2012 | |
| Point-of-Care Blood Glucose Testing in Acute and Chronic Care Facilities; Approved Guideline | |
| Point-of-Care Coagulation Testing and Anticoagulation Monitoring | |
| Point-of-Care Connectivity | |
| Point-of-Care In Vitro Diagnostic (IVD) Testing; Approved Guideline | |
| Point-of-Care Monitoring of Anticoagulation Therapy; Approved Guideline | |
| Point-of-Care Testing for Infectious Diseases | |
| Policy on Design Standards - Interstate System | |
| POLISH, AUTOMOBILE, LIQUID AND PASTE | |
| POLISH, FURNITURE | |
| POLISH, METAL | |
| POLISH, PLASTIC | |
| POLISH, SHOE; PASTE | |
| POLISH; SILVER | |
| POLYCARBONATE (PC), GENERAL PURPOSE, WSS-M4D1051-B1 HIGH MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Polymer Nanocomposites: Processing, Characterization, and Applications | |
| Polyvinylpyrrolidone CAS # 9003-39-8 ORAL RISK ASSESSMENT DOCUMENT | |
| Portfolio of Trackwork Plans | |
| PostGIS Cookbook | |
| PostgreSQL 9 High Availability Cookbook | |
| PostgreSQL High Availability Cookbook | |
| PostgreSQL Replication | |
| POTENTIAL IMPACT OF ENVIRONMENTAL REGULATIONS ON THE OIL AND GAS EXPLORATION AND PRODUCTION INDUSTRY | |
| Powder Forging | |
| POWDER METALLURGY DESIGN MANUAL | |
| Power and Pads | |
| Power Boilers: A Guide to Section I of the ASME Boiler and Pressure Vessel Code | |
| Practice for the Analysis of Defects in Parts and Conclusion | |
| Procedure for Evaluating Ground Fault Circuit Interrupters for Response to Conducted Radio Frequency Energy | |
| Process Unit and Offsites Layout Guide | |
| Propagation Data and Prediction Method Required for the Design of Earth-Space Telecommunications Systems | |
| Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method | |
| Purchasing Requirements for Bolting | |
| Purchasing Requirements for Fittings | |
| Purchasing Requirements for Flanges | |
| Purchasing Requirements for Gaskets | |
| Purchasing Requirements for Pipe | |
| Quality Management: Approaches to Reducing Errors at the Point of Care; Approved Guideline | |
| Quality Practices in Noninstrumented Pointof- Care Testing: An Instructional Manual and Resources for Health Care Workers; Approved Guideline | |
| Recommended Practice for Geosynthetic Reinforcement of the Aggregate Base Course of Flexible Pavement Structures | |
| Selection Criteria for Point-of-Care Testing Devices; Approved Guideline | |
| Site investigations. Guide to BS 5930:1999 Code of practice for site investigations, for higher education | |
| Specifications for PlP Valve Commodity Codes | |
| Stainless Steel Ball Valve Descriptions | |
| Stainless Steel Butterfly Valve Descriptions | |
| Stainless Steel Check Valve Descriptions | |
| Stainless Steel Gate Valve Descriptions | |
| Stainless Steel Globe Valve Descriptions | |
| Stainless Steel Other Valve Descriptions | |
| Stainless Steel Plug Valve Descriptions | |
| Standard Method of Practice for Static Segregation of Hardened Self-Consolidating Concrete (SCC) Cylinders | |
| Standard Practice for AASHTO Definitions for Sustainability Terms | |
| Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) | |
| Standard Practice for Acceptance of Ground Reference Scanning Equipment for Pavement Imaging System Assessment | |
| Standard Practice for Asphalt Surface Dielectric Profiling System using Ground Penetrating Radar | |
| Standard Practice for Asphalt Tack Coat Design | |
| Standard Practice for Assessment of Body Motion Cancellation in Transverse Pavement Profiling Systems | |
| Standard Practice for Assessment of Corrosion of Steel Piling for Non-Marine Applications | |
| Standard Practice for Assessment of Ground Reference Data for Transverse Pavement Profiling System Assessment | |
| Standard Practice for Assessment of Highway Performance of Transverse Pavement Profiling Systems | |
| Standard Practice for Assessment of Navigation Drift Mitigation in Transverse Pavement Profiling Systems | |
| Standard Practice for Assessment of Static Performance in Transverse Pavement Profiling Systems | |
| Standard Practice for Balanced Design of Asphalt Mixtures | |
| Standard Practice for Certification of High-Speed Macrotexture Measurement Equipment | |
| Standard Practice for Certification of Inertial Profiling Systems | |
| Standard Practice for Certifying Suppliers of Emulsified Asphalt | |
| Standard Practice for Characterizing the Relaxation Behavior of Asphalt Binders Using the Delta Tc (?Tc) Parameter | |
| Standard Practice for Coal Combustion Fly Ash for Embankments | |
| Standard Practice for Collecting Images of Pavement Surfaces for Distress Detection | |
| Standard Practice for Collecting the Transverse Pavement Profile | |
| Standard Practice for Continuous Thermal Profile of Asphalt Mixture Construction | |
| Standard Practice for Crack Annotation and Crack Length and Width Computation on 2D/3D Pavement Images | |
| Standard Practice for Data Lot Names for Use with Intelligent Construction Technologies | |
| Standard Practice for Definition of Terms Related to Transverse Pavement Profiling Systems and Ground Reference Equipment | |
| Standard Practice for Design Considerations When Using Reclaimed Asphalt Shingles (RAS) in Asphalt Mixtures | |
| Standard Practice for Designing Stone Matrix Asphalt (SMA) | |
| Standard Practice for Determination of Long-Term Strength for Geosyurthetic Reinforcement | |
| Standard Practice for Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders | |
| Standard Practice for Determination of Size and Roundness of Glass Beads Used in Traffic Markings by Means of Computerized Optical Method | |
| Standard Practice for Determining Aggregate Source Shape Values from DIgital image Analysis Shape Properties | |
| Standard Practice for Determining Maximum Rut Depth in Asphalt Pavements | |
| Standard Practice for Determining Pavement Deformation Parameters and Gross Slope from Collected Transverse Profiles | |
| Standard Practice for Determining the Reactivity of Concrete Aggregates and Selecting Appropriate Measures for Preventing Deleterious Expansion in New Concrete Construction | |
| Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT) | |
| Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) | |
| Standard Practice for Developing Performance Engineered Concrete Pavement Mixtures | |
| Standard Practice for Development of Balanced and Durable Asphalt Mixtures with High Recycled Asphalt Materials Contents | |
| Standard Practice for Digital Interchange of Geotechnical Data | |
| Standard Practice for Emulsified Asphalt Chip Seal Design | |
| Standard Practice for Emulsified Asphalt Content of Cold Recycled Mixture Designs | |
| Standard Practice for Emulsified Asphalt Content of Full-Depth Reclamation Mixture Design | |
| Standard Practice for Emulsified Asphalt Fog Seal Design | |
| Standard Practice for Emulsified Asphalt Scrub Seal Design | |
| Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks | |
| Standard Practice for Evaluating Pavement Image Crack Identification Performance | |
| Standard Practice for Evaluation of the Superpave Gyratory compactor (SGC) Internal Angle of Gyration | |
| Standard Practice for Grading or Verifying the Sealant Grade (SG) of a Hot-Poured Asphalt Crack Sealant | |
| Standard Practice for Grinding the Ends of Cylindrical Concrete Specimens | |
| Standard Practice for High Friction Surface Treatment for Asphalt and Concrete Pavements | |
| Standard Practice for Intelligent Compaction Technology for Embankment and Asphalt Pavement Applications | |
| Standard Practice for Manufacturing Reference Objects Using 3D Printing for the Assessment of 3D Pavement Imaging Systems | |
| Standard Practice for Materials Selection and Mixture Design of Permeable Friction Courses (PFCs) | |
| Standard Practice for Measuring Pavement Surface Image Characteristics and Quality Using Field Pavement Spots | |
| Standard Practice for Measuring Pavement Surface Image Characteristics and Quality Using Reference Objects | |
| Standard Practice for Micro Surfacing Design | |
| Standard Practice for Operating Equipment for Measuring Macrotexture at Highway Speeds | |
| Standard Practice for Operating Inertial Profilers and Evaluating Pavement Profiles | |
| Standard Practice for Overcoating Field Test Program for Evaluating Protective Coatings on Existing Bridges or Salvaged Beams | |
| Standard Practice for Pavement Scan Registration and FullReference Image Quality Assessment | |
| Standard Practice for Pipe Joint Selection for Highway Culvert and Storm Drains | |
| Standard Practice for Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC) | |
| Standard Practice for Preparation of Small Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC) or Field Cores | |
| Standard Practice for Preparation of Test Specimens Using the Plastic Mold Compaction Device | |
| Standard Practice for Preparing Hot Mix Asphalt (HMA) Specimens by Means of the Rolling Wheel Compactor | |
| Standard Practice for Quality Assurance, Job Site Quality Control, and Reapplication of Protective Sealers for Portland Cement Concrete | |
| Standard Practice for Quantifying Cracks in Asphalt Pavement Surface | |
| Standard Practice for Quantifying Cracks in Asphalt Pavement Surfaces from Collected images Utilizing Automated Methods | |
| Standard Practice for Recognizing Surrogate Test Methods | |
| Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Techniques | |
| Standard Practice for Sample Preparation and Polishing of Asphalt Mixture Specimens for Dynamic Friction Testing | |
| Standard Practice for Sample Preparation and Polishing of Unbound Aggregates for Dynamic Friction Testing | |
| Standard Practice for Sand Seal Design | |
| Standard Practice for Slurry Seal Design | |
| Standard Practice for Terminology Adopted for the Assessment of 3D Pavement Imaging Systems | |
| Standard Practice for Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SGCs) Used in the Design and the Field Management of Superpave Mixtures | |
| Standard Practice for Ultrathin Bonded Wearing Course Design | |
| Standard Practice for Vacuum Drying Compacted Asphalt Specimens | |
| Standard Recommended Practice for Determination of Constant Mass | |
| Standard Recommended Procedure for Qualification of Deformed and Plain Steel Bar Producing Mills | |
| Standard Specification for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphalt | |
| Standard Specification for Durable Green Bike Lane Surface Treatments for Asphalt and Concrete Pavements with Exposure to Vehicular Traffic | |
| Standard Specification for Preparation of Indirect Tension Performance Test Specimens | |
| Standardization for Information Technology | |
| Standards and Textiles | |
| Steam Tracing Specification | |
| Steam Trap Guidelines | |
| Streamflow Measurement | |
| Use of Glucose Meters for Critically Ill Patients | |
| Valve Commodity Codes Designator System | |
| Valve Purchase Specification | |
| Vents, Drains, and Instrument Connection Details | |
| VHF and UHF Propagation Curves for the Frequency Range from 30 MHz to 1 000 MHz |
| << Prev | Next >> |