Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys | |
| Acoustics - Definitions of basic quantities and terms | |
| Acoustics - Measurement of the influence of road surfaces on traffic noise Part 3: Reference tyres | |
| Acoustics - non-acoustic factors influencing the perception, interpretation and response to environmental sounds Part 1: Definition and conceptual framework | |
| Acoustics \x97 Soundscape Part 2: Data collection and reporting requirements | |
| Acoustics \x97 Soundscape Part 3: Data analysis | |
| Acoustics \x97 Temperature influence on tyre/road noise measurement Part 1: Correction for temperature when testing with the CPX method | |
| Acoustics \x97 Temperature influence on tyre/road noise measurement Part 2: Correction for temperature when testing with the pass-by methods | |
| Activities relating to drinking water and wastewater services \x97 Examples of the use of performance indicators using ISO 24510, ISO 24511 and ISO 24512 and related methodologies | |
| Adaptation to climate change \x97 Requirements and guidance on adaptation planning for local governments and communities | |
| Ageing societies - Accessibility and usability considerations for home healthcare products, related services and environments | |
| Air quality \x97 Validation of air quality measurement methods in the standardization process | |
| Animal and vegetable fats and oils - Determination of phthalates in vegetable oils | |
| Application of risk management for IT-networks incorporating medical devices \x97 Application guidance Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1 | |
| Application of risk management for IT-networks incorporating medical devices Part 2-6: Application guidance \x97 Guidance for responsibility agreements | |
| Applications of statistical and related methods to new technology and product development process Part 6: Guidance for QFD-related approaches to optimization | |
| Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device | |
| Automated liquid handling systems \x97 Uncertainty of the measurement procedures | |
| Automation systems and integration \x97 Digital twin framework for manufacturing Part 100: Use case on management of semiconductor ingot growth process | |
| Automation systems and integration \x97 Industrial data \x97 Visualization elements of digital twins | |
| Basic human body measurements for technological design Part 2: Statistical summaries of body measurements from individual ISO populations | |
| Basic human body measurements for technological design Part 4: Expected performance of skilled anthropometrists | |
| Best practices for an internal BPoS handbook | |
| Biological evaluation of medical devices \x97 Requirements for interlaboratory studies to demonstrate the applicability of validated in vitro methods to assess the skin sensitization of medical devices | |
| Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials | |
| Biomimetics \x97 Image search engine | |
| Biomimetics \x97 Integrating problem and function-oriented approaches applying the TRIZ method | |
| Biomimetics \x97 Ontology-Enhanced Thesaurus (OET) for biomimetics | |
| Biotechnology - Data publication - Preliminary considerations and concepts | |
| Biotechnology - Inventory of methods for detection of microbiological contamination in mammalian cell culture | |
| Blockchain and distributed ledger technologies (DLTs) \x97 Overview of trust anchors for DLT-based identity management | |
| Blockchain and distributed ledger technologies - Data flow models for blockchain and DLT use cases | |
| Blockchain and distributed ledger technologies - Overview of existing DLT systems for identity management | |
| Blockchain and distributed ledger technologies \x97 Identifiers of subjects and objects for the design of blockchain systems | |
| Blockchain and distributed ledger technologies \x97 Overview of and interactions between smart contracts in blockchain and distributed ledger technology systems | |
| Blockchain and distributed ledger technologies \x97 Security management of digital asset custodians | |
| Blockchain and distributed ledger technologies \x97 Use cases | |
| Brazing \x97 Grouping systems for materials \x97 American materials | |
| Buildings and civil engineering works - Building resilience strategies related to public health emergencies - Compilation of relevant information | |
| Calculation of load capacity of bevel gears Part 20: Calculation of scuffing load capacity \x97 Flash temperature method | |
| Calculation of load capacity of spur and helical gears Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 | |
| Calculation of load capacity of spur and helical gears Part 31: Calculation examples of micropitting load capacity | |
| Carbon dioxide capture \x97 Carbon dioxide capture systems, technologies and processes | |
| Carbon dioxide capture \x97 Overview of carbon dioxide capture technologies in the cement industry | |
| Carbon dioxide capture, transportation and geological storage - Carbon dioxide enhanced oil recovery (CO2-EOR) - Transitioning from EOR to storage | |
| Carbon dioxide capture, transportation and geological storage \x97 Cross cutting issues \x97 Flow assurance | |
| Carbon dioxide capture, transportation, and geological storage \x97 Cross Cutting Issues \x97 CO2 stream composition | |
| Cardiovascular biological evaluation of medical devices \x97 Guidance for absorbable implants | |
| Cast irons \x97 Determination of non-combined carbon content \x97 lnfrared absorption method after combustion in an induction furnace | |
| Circular economy - Review of existing value networks | |
| Clinical laboratory testing \x97 Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing | |
| Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing | |
| compares PD ISO/TR 24464:2025 with PD ISO/TR 24464:2020 | |
| Connectors for fluid power and general use - Assembly instructions for connectors with adjustable stud ends and O-ring sealing | |
| Connectors for fluid power and general use - Designation and nomenclature | |
| Consumer protection - Privacy by design for consumer goods and services Part 2: Use cases | |
| Copper, lead and zinc sulfide concentrates \x97 Step-by-step procedure for the testing of static scales | |
| Core banking \x97 Mobile financial services Part 2: Security and data protection for mobile financial services | |
| Core banking \x97 Mobile financial services Part 3: Financial application lifecycle management | |
| Core banking \x97 Mobile financial services Part 4: Mobile payments-to-persons | |
| Core banking \x97 Mobile financial services Part 5: Mobile payments to businesses | |
| Corrosion of metals and alloys - Exposure test results in the Asian Monsoon region | |
| Corrosion of metals and alloys - Overview of metal corrosion protection when using disinfectants | |
| Cosmetics - Good Manufacturing Practices - General training document | |
| Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations | |
| Crop protection equipment - Traceability - Spray parameter recording | |
| Cryolite, natural and artificial - Conventional test for evaluation of free fluorides content | |
| Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items | |
| Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items | |
| Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items | |
| Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models - Regular inserts | |
| Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models \x97 Irregular inserts | |
| Cutting tool data representation and exchange Part 203: Creation and exchange of 3D models \x97 Replaceable inserts for drilling | |
| Cutting tool data representation and exchange Part 204: Creation and exchange of 3D models \x97 Inserts for reaming | |
| Cutting tool data representation and exchange Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting... | |
| Cutting tool data representation and exchange Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools | |
| Cutting tool data representation and exchange Part 303: Creation and exchange of 3D models \x97 Solid end mills | |
| Cutting tool data representation and exchange Part 304: Creation and exchange of 3D models \x97 Solid milling cutters with arbor hole | |
| Cutting tool data representation and exchange Part 305: Creation and exchange of 3D models \x97 Modular tooling systems with adjustable cartridges for boring | |
| Cutting tool data representation and exchange Part 306: Creation and exchange of 3D models \x97 Drills and countersinking tools for indexable inserts | |
| Cutting tool data representation and exchange Part 307: Creation and exchange of 3D models \x97 End mills for indexable inserts | |
| Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models \x97 Milling cutters with arbor hole for indexable inserts | |
| Cutting tool data representation and exchange Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts | |
| Cutting tool data representation and exchange Part 310: Creation and exchange of 3D models \x97 Turning tools with carbide tips | |
| Cutting tool data representation and exchange Part 311: Creation and exchange of 3D models \x97 Solid reamers | |
| Cutting tool data representation and exchange Part 312: Creation and exchange of 3D models \x97 Reamers for indexable inserts | |
| Cutting tool data representation and exchange Part 313: Creation and exchange of 3D models - Burrs | |
| Cutting tool data representation and exchange Part 314: Creation and exchange of 3D models \x97 Cartridges for indexable inserts | |
| Cutting tool data representation and exchange Part 315: Creation and exchange of 3D models \x97 Modelling of machine operated feed out tools | |
| Cutting tool data representation and exchange Part 401: Creation and exchange of 3D models \x97 Converting, extending and reducing adaptive items | |
| Cutting tool data representation and exchange Part 403: Creation and exchange of 3D models \x97 Modelling of driven tool units | |
| Cutting tool data representation and exchange Part 405: Creation and exchange of 3D models - Collets | |
| Cutting tool data representation and exchange Part 406: Creation and exchange of 3D models \x97 Modelling of connection interface | |
| Cutting tool data representation and exchange Part 50: Reference dictionary for reference systems and common concepts | |
| Cutting tool data representation and exchange Part 5: Reference dictionary for assembly items | |
| Cutting tool data representation and exchange Part 60: Reference dictionary for connection systems | |
| Cutting tool data representation and exchange Part 70: Graphical data layout \x97 Layer setting for tool layout | |
| Cutting tool data representation and exchange Part 71: Graphical data layout \x97 Creation of documents for standardized data exchange: Graphical product information | |
| Cutting tool data representation and exchange Part 72: Creation of documents for the standardized data exchange \x97 Definition of properties for drawing header and their XML-data exchange | |
| Cutting tool data representation and exchange Part 80: Creation and exchange of 3D models \x97 Overview and principles | |
| Dentistry - Endodontic instruments Part 6: Number coding system | |
| Dentistry - Polymer-based luting materials containing adhesive components | |
| Dentistry \x97 Guidance on colour measurement | |
| Dentistry \x97 Testing of adhesion to tooth structure | |
| Design and asset management of DIP for water application Part 2: Design, installation and operation | |
| Development of a water equivalent phantom to measure the physical characteristics of specific radiosurgery treatment devices | |
| Digital validation by effective use of simulation | |
| Direct reduced iron \x97 Determination of carbon and/or sulfur \x97 High-frequency combustion method with infrared measurement | |
| Earth-moving machinery - Machine control systems (MCS) using electronic components Part 2: Use and application of ISO 15998 | |
| Earth-moving machinery - Operator's manual Part 2: List of references | |
| Earth-moving machinery \x97 Machines utilizing electric rechargeable energy storage systems (RESS) | |
| Earth-moving machinery and mobile road construction machinery \x97 Worksite data exchange Part 3: Telematics data | |
| Earth-moving machinery and mobile road construction machinery \x97 Worksite data exchange Part 4: Worksite topographical data | |
| Education and learning services - Distance and digital learning services (DDLS) - Case studies | |
| Effect of conductivity on multipass testing as per ISO 4548-12:2017 | |
| Electrically propelled road vehicles - Vocabulary | |
| Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings | |
| Electronic Fee Collection (EFC) \x97 Interface definition between DSRC-OBE and external invehicle devices | |
| Electronic fee collection - Image-based tolling systems - Measurable characteristics | |
| Electronic Imaging Forms Design Optimization for Electronic Image Management | |
| Environmental damage limitation from fire-fighting water run-off | |
| Environmental labels and declarations \x97 Development of product category rules | |
| Environmental management - Environmental techno-economic assessment - Principles, requirements and guidance | |
| Environmental management - Life cycle assessment - Principles, requirements and guidelines for normalization, weighting and interpretation | |
| Environmental management - Quantitative environmental information - Guidelines and examples | |
| Environmental management \x97 Life cycle assessment \x97 Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 | |
| Environmental management \x97 Life cycle assessment \x97 Requirements and guidelines for organizational life cycle assessment | |
| Environmental statements and programmes for products \x97 Mutual recognition of environmental product declarations (EPDs) and footprint communication programmes | |
| Ergonomics - Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector | |
| Ergonomics \x97 The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction) | |
| Ergonomics of human-system interaction Part 100: Introduction to standards related to software ergonomics | |
| Ergonomics of human-system interaction Part 308: Surface-conduction electron-emitter displays (SED) | |
| Ergonomics of human-system interaction Part 309: Organic light-emitting diode (OLED) displays | |
| Ergonomics of human-system interaction Part 310: Visibility, aesthetics and ergonomics of pixel defects | |
| Ergonomics of human-system interaction Part 311: Application of ISO 9241-307: LCD screens for workstations | |
| Ergonomics of human-system interaction Part 312: Readability of electrophoretic displays | |
| Ergonomics of human-system interaction Part 313: Optical measurement methods for reflective displays | |
| Ergonomics of human-system interaction Part 331: Optical characteristics of autostereoscopic displays | |
| Ergonomics of human-system interaction Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction | |
| Ergonomics of human-system interaction Part 393: Structured literature review of visually induced motion sickness during watching electronic images | |
| Ergonomics of human-system interaction Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series | |
| Ergonomics of human-system interaction Part 610: Impact of light and lighting on users of interactive systems | |
| Ergonomics of human-system interaction Part 810: Robotic, intelligent and autonomous systems | |
| Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces Part 2: Human contact with surfaces at moderate temperature | |
| Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes | |
| Examples of good practice for the management of assets of water supply and wastewater systems Part 1: Water supply | |
| Examples of good practice for the management of assets of water supply and wastewater systems Part 2: Wastewater systems | |
| Experiment results on test methods for detection and avoidance (DAA) systems for unmanned aircraft systems | |
| Facility management - Existing performance management in facility management organizations - State of the industry | |
| Female condoms - Use of ISO 25841 and the quality management of female condoms | |
| Fibre ropes for offshore stationkeeping - High modulus polyethylene (HMPE) | |
| Financial services \x97 Natural person identifier (NPI) \x97 Natural person identifier lifecycle operation and management | |
| Financial services \x97 Security information for PKI in blockchain and DLT implementations | |
| Fine bubble technology - Transportation and dispensing systems for agro- and aqua-cultural applications Part 1: Ultrafine bubble concentration loss in ultrafine bubble water passing through long-distance plastic pipes | |
| Fine bubble technology \x97 Guideline for indicating benefits Part 2: Assignment of Sustainable Development Goals (SDGs) to applications of fine bubble technologies | |
| Fire safety engineering - Performance of structures in fire Part 4: Example of a fifteen-storey steel-framed office building | |
| Fire safety engineering - Performance of structures in fire Part 5: Example of a timber building in Canada | |
| Fire safety engineering \x97 Guidance for use of fire zone models | |
| Fire safety engineering \x97 Performance of structure in fire Part 2: Example of an airport terminal | |
| Fire safety engineering \x97 Performance of structure in fire Part 3: Example of an open car park | |
| Fire safety engineering \x97 Performance of structures in fire Part 6: Example of an eight-storey office concrete building | |
| Fire safety engineering \x97 Performance of structures in fire Part 8: Example of a probabilistic assessment of a concrete building | |
| Fire safety engineering \x97 Selection of design fire scenarios and design fires Part 2: Design fires | |
| Fire safety on lifts Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation | |
| Food products \x97 Guidance on how to express vitamins and their vitamers content | |
| Framework for building information modelling (BIM) guidance | |
| Gas cylinders - Service life performance of composite cylinders and tubes | |
| Gas cylinders \x97 List of provisions | |
| Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes - Listing of connections which are either standardised or in common use | |
| Gears - Calculation of load capacity of worm gears | |
| Geometrical product specifications (GPS) \x97 Surface texture: Profile method \x97 Flowchart for PSm, RSm, WSm and Pc, Rc, Wc | |
| Geosynthetics - Guidelines for the assessment of durability | |
| GIS (geospatial) / BIM interoperability | |
| Glass reinforced thermosetting plastic (GRP) pipes \x97 Determination of initial specific ring stiffness using segment test species cut from a pipe | |
| Good practice in reference material preparation | |
| Graphic technology - Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data | |
| Graphic technology - Requirements for printed matter for commercial and industrial production Part 1: Measurement methods and reporting schema | |
| Graphic technology \x97 Print quality requirements for printed matter Part 2: Commercial print applications utilizing digital printing technologies | |
| Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication | |
| Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | |
| Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery | |
| Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications | |
| Guidelines for the use of ISO 5167:2003 | |
| Guidelines for using UML notation in terminology work | |
| Health informatics - A case study on establishing standardized measurement data in cardiac examination reports | |
| Health informatics - Categorial structures for representation of acupuncture Part 3: Moxibustion | |
| Health informatics - Categorial structures for representation of acupuncture Part 6: Acupuncture effect | |
| Health informatics - Datasets and data structure for clinical and biological evaluation metrics in radiotherapy | |
| Health informatics - Information security management for remote maintenance of medical devices and medical information systems Part 1: Requirements and risk analysis | |
| Health informatics - Introduction to Ayurveda informatics | |
| Health informatics - Measures for ensuring patient safety of health software | |
| Health informatics - Reference model for virtual reality (VR)-based clinical practice simulation | |
| Health informatics - Sex and gender in electronic health records | |
| Health informatics \x97 Categorial structures for representation of acupuncture Part 1: Acupuncture points | |
| Health informatics \x97 Categorial structures for representation of acupuncture Part 2: Needling | |
| Health informatics \x97 Categorial structures for representation of acupuncture Part 4: Meridian and collateral channels | |
| Health informatics \x97 Categorial structures of clinical findings in traditional medicine Part 1: Traditional Chinese, Japanese and Korean medicine | |
| Health informatics \x97 IHE global standards adoption Part 1: Process | |
| Health informatics \x97 IHE global standards adoption Part 2: Integration and content profiles | |
| Health informatics \x97 IHE global standards adoption Part 3: Deployment | |
| Health informatics \x97 Requirements for international machine-readable coding of medicinal product package identifiers | |
| Health informatics \x97 Sharing of OID registry information | |
| Health informatics \x97 Standardizing graphical content | |
| Human resource management \x97 Sustainable employability management for organizations | |
| Hydraulic fluid power \x97 Background, impact and use of ISO 11171:2020 on particle count and filter test data | |
| Hydraulic fluid power \x97 Interpolation method for particle count and filter test data | |
| Hydraulic fluid power \x97 Method for evaluating the buckling load of a hydraulic cylinder | |
| Hydraulic fluid power \x97 Sample calculations for ISO 11171 | |
| Hydraulic fluid power Assembled systems Verification of cleanliness | |
| Hydrometry - Acoustic Doppler profiler - Method and application for measurement of flow in open channels | |
| Hydrometry - Measurement of free surface flow in closed conduits | |
| Hydrometry \x97 Measurement in meandering river and in streams with unstable boundaries | |
| Hydrometry Measurement of liquid flow in open channels Methods of measurement of bedload discharge | |
| Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities Part 12: Life cycle integration ontology represented in OWL | |
| Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities Part 6: Methodology for the development and validation of reference data... | |
| Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities Part 7: Implementation methods for the integration of distributed systems: Template... | |
| Industrial automation systems and integration - Parts library Part 35: Implementation resources: Spreadsheet interface for parts library | |
| Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers Part 201: Machine tool data for cutting processes | |
| Industrial automation systems and integration - Product data representation and exchange Part 15: Description methods: SysML XMI to XSD transformation | |
| Industrial automation systems and integration - Product data representation and exchange Part 16: Description methods: SysML XMI to EXPRESS transformation | |
| Industrial automation systems and integration - Product data representation and exchange Part 27: Implementation methods: Java\x99 programming language binding to the standard data access interface with Internet/Intranet extensions | |
| Industrial automation systems and integration \x97 Integration of life-cycle data for process plants including oil and gas production facilities Part 11: Methodology for simplified industrial usage of reference data | |
| Industrial automation systems and integration \x97 Integration of life-cycle data for process plants including oil and gas production facilities Part 4: Initial reference data | |
| Industrial automation systems and integration \x97 Integration of life-cycle data for process plants including oil and gas production facilities Part 8: Implementation methods for the integration of distributed systems: Web... | |
| Information and documentation - Issues and considerations for managing records in structured data environments | |
| Information and documentation - Performance indicators for national libraries | |
| Information and documentation - Processes and functional requirements for software for managing records Part 2: Guidance for selecting, designing, implementing and maintaining software for managing records | |
| Information and documentation - Work process analysis for records | |
| Information and documentation \x97 Blockchain and distributed ledger technology (DLT) in relation to authoritative records, records systems and records management | |
| Innovation management - Example implementations of innovation operation measurements | |
| Innovation Management Assessment \x97 Guidance | |
| Integrative design of the building envelope \x97 General principles | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - Communication protocol messages for global usage | |
| Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 11: Driver work records (work and rest hours compliance) (DWR | |
| Intelligent transport systems - Joint APECISO study of progress to develop and deploy ITS standards | |
| Intelligent transport systems - Low-speed automated driving system (LSADS) service Part 2: Gap analysis | |
| Intelligent transport systems - Mobility integration - Comparison of two mainstream Integrated mobility concepts | |
| Intelligent transport systems - Mobility integration - Digital infrastructure service role and functional model for urban ITS service applications | |
| Intelligent transport systems - Mobility integration - Enterprise view | |
| Intelligent transport systems - Mobility integration - Mobility integration needs for vulnerable users and light modes of transport | |
| Intelligent transport systems - Mobility integration - Role model of ITS service application in smart cities | |
| Intelligent transport systems - System architecture - \x93Use Case\x94 pro-forma template | |
| Intelligent transport systems - System architecture, taxonomy and terminology - Procedures for developing ITS deployment plans utilizing ITS system architecture | |
| Intelligent transport systems - System architecture, taxonomy, terminology and data modelling - Training requirements for ITS architecture | |
| Intelligent transport systems - Systems architecture - Harmonization of ITS data concepts | |
| Intelligent transport systems - Systems architecture - Use of process-oriented methodology in ITS International Standards and other deliverables | |
| Intelligent transport systems - Systems architecture - Use of unified modelling language (UML) in ITS International Standards and deliverables | |
| Intelligent transport systems - Use cases for sharing of probe data | |
| Intelligent transport systems - Vocabulary | |
| Intelligent transport systems \x97 Architecture \x97 Applicability of data distribution technologies within ITS | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 10: Emergency messaging system/eCall (EMS) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 12: Vehicle mass monitoring (VMM) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 14: Vehicle access control (VAC) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 15: Vehicle location monitoring (VLM) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 16: Vehicle speed monitoring (VSM) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 17: Consignment and location monitoring (CLM) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 18: ADR (Dangerous Goods) transport monitoring (ADR) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 19: Vehicle parking facilities (VPF) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 6: Regulated applications | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 8: Vehicle access monitoring (VAM) | |
| Intelligent transport systems \x97 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 9: Remote electronic tachograph monitoring (RTM) | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 4: System security requirements | |
| Intelligent transport systems \x97 Framework for cooperative telematics applications for regulated vehicles (TARV) Part 26: Electric vehicle dynamic charging monitoring | |
| Intelligent transport systems \x97 Mobility integration \x97 Role model of the human-centric predictive risk information provisioning service | |
| Intelligent transport systems \x97 Public-area mobile robots (PMR) Part 1: Overview of paradigm | |
| Intelligent transport systems \x97 Seamless positioning for multimodal transportation in ITS stations Part 1: General information and use case definition | |
| Intelligent transport systems \x97 Using web services (machine-machine delivery) for ITS service delivery Part 2: Elaboration of interoperable web services\x92 interfaces | |
| Intelligent transport systems \x97 Using web services (machine-machine delivery) for ITS service delivery Part 3: Quality of service | |
| Intelligent transport systems Systems architecture, taxonomy and terminology Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries | |
| Iron ores - Determination of aluminium Part 1: Flame atomic absorption spectrometric method | |
| Large outdoor fires and the built environment - Global overview of different approaches to standardization | |
| Leather \x97 Raw cattle hides and calf skins Part 2: Guidelines for grading on the basis of mass | |
| Leather \x97 Raw cattle hides and calf skins Part 3: Guidelines for grading on the basis of defects | |
| Lifecycle risk management for integrated CCS projects | |
| Lifts (elevators) - Study of the use of lifts for evacuation during an emergency | |
| Light and lighting - Commissioning of lighting systems in buildings - Explanation and justification of ISO/TS 21274 | |
| Manufacturers\x92 considerations for in vitro diagnostic medical devices in a public health emergency | |
| Measurement of fluid flow in closed conduits \x97 Guidelines on the effects of flow pulsations on flow-measurement instruments | |
| Measurement of radioactivity in the environment \x97 Air: radon 222 Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method | |
| Measurement of radioactivity in the environment \x97 Air: radon-222 Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method | |
| Mechanical vibration - Ground-borne noise and vibration arising from rail systems Part 32: Measurement of dynamic properties of the ground | |
| Mechanical vibration - Ground-borne noise and vibration arising from rail systems Part 34: Characterizing irregularity of the running surfaces with respect to vibration excitation | |
| Mechanical vibration \x97 Ground-borne noise and vibration arising from rail systems Part 31: Guideline on field measurements for the evaluation of human exposure in buildings | |
| Medical device software Part 2: Validation of software for medical device quality systems | |
| Medical devices \x97 Guidance on the application of ISO 14971 | |
| Medical devices. Guidance on the application of ISO 14971 | |
| Metallic materials \x97 Measurement of mechanical properties by an instrumented indentation test \x97 Indentation tensile properties | |
| Microstructure of cast irons Part 2: Graphite classification by image analysis | |
| Microstructure of cast irons Part 3: Matrix structures | |
| Mine closure and reclamation - Managing mining legacies Part 2: Case studies and bibliography | |
| Molecular biomarker analysis - Determination of the performance characteristics of qualitative measurement methods and validation of methods | |
| Motorcycles - Consideration for use cases of ISO 26262-12 MSIL classification | |
| Motorcycles - Guideline for verification of total running resistance force during mode running on a chassis dynamometer | |
| Nanomaterials - Preparation of safety data sheets (SDS) | |
| Nanomaterials - Quantification of nano-object release from powders by generation of aerosols | |
| Nanotechnologies - Characterization of carbon nanotube and carbon nanofiber aerosols in relation to inhalation toxicity tests | |
| Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis | |
| Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors | |
| Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy | |
| Nanotechnologies - Considerations for radioisotope labelling methods of nanomaterials for performance evaluation | |
| Nanotechnologies - Guidance on the measurement of nanoparticle number concentration | |
| Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement | |
| Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement | |
| Nanotechnologies - Occupational risk management applied to engineered nanomaterials Part 1: Principles and approaches | |
| Nanotechnologies \x97 Characterisation of single-wall carbon nanotubes using transmission electron microscopy | |
| Nanotechnologies \x97 Characterization of single-wall carbon nanotubes using ultraviolet-visible- near infrared (UV-Vis-NIR) absorption spectroscopy | |
| Nanotechnologies \x97 Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry | |
| Nanotechnologies \x97 Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry | |
| Nanotechnologies \x97 Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus | |
| Nanotechnologies \x97 Occupational risk management applied to engineered nanomaterials Part 2: Use of the control banding approach | |
| Nanotechnologies \x97 Specification for developing representative test materials consisting of nano-objects in dry powder form | |
| Nanotechnologies \x97 Superhydrophobic surfaces and coatings: Characteristics and performance assessment | |
| Nanotechnologies \x97 Textiles containing nanomaterials and nanostructures \x97 Superhydrophobic characteristics and durability assessment | |
| Natural gas - Odorization | |
| Natural gas \x97 Coalbed methane quality designation and the applicability of ISO/TC 193 current standards | |
| Natural gas \x97 Supporting information on the calculation of physical properties according to ISO 6976 | |
| Natural gas \x97 Upstream area \x97 Allocation of gas and condensate | |
| Nickels, ferronickels and nickel alloys - Standards for the determination of chemical composition | |
| Non-destructive testing \x97 Automated ultrasonic testing \x97 Selection and application of systems | |
| Office furniture \x97 Office work chairs \x97 Methods for the determination of dimensions | |
| Ophthalmic optics - Spectacle lenses - Parameters affecting lens power measurement | |
| Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Guidance for the selection of test methods | |
| Paper and board \x97 Measurement of water contact angle by optical methods | |
| Paper, board and pulps - Basic guidelines for image analysis measurements | |
| Paper, board and pulps \x97 Estimation of uncertainty for test methods by interlaboratory comparisons | |
| Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test - Stabilized flame heat release method | |
| Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases Part 2: Method with water wash-out | |
| Petroleum products and other liquids \x97 Guidance for flash point and combustibility testing | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure Part 3: Fittings | |
| Plain bearings - Recommendations for automotive crankshaft bearing environments | |
| Plastics - Development and use of intermediate-scale fire tests for plastics products Part 2: Use of intermediate-scale tests for semi-finished and finished products | |
| Plastics - Recycling and recovery - Necessity of standards | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - System design of above ground pipe and joint installations without end thrust | |
| Plastics piping systems for water supply \x97 Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) \x97 Guidance for installation | |
| Polyurethane tubing for use primarily in pneumatic installations \x97 Dimensions and specification | |
| Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures | |
| PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring... | |
| Preparation of particulate reference materials Part 1: Polydisperse material based on picket fence of monodisperse spherical particles | |
| Principles for successful collaborative business relationship management | |
| Prosthetics \x97 Quantification of physical parameters of ankle foot devices and foot units | |
| Pulps \x97 Guidelines for using laboratory refiners to simulate industrial low consistency refining | |
| Qualification of casing connections for thermal wells | |
| Quality management systems - Guidance for the application of ISO 19443:2018 | |
| Quality management systems - Organizational change management - Processes | |
| Quality management systems. Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations | |
| Quality Systems - Automotive Suppliers - Particular Requirements for the Application of ISO 9001: 1994 | |
| Railway applications - Rolling stock - Interior passive safety | |
| Railway infrastructure - Track quality evaluation - Chord-based method | |
| Railway infrastructure \x97 Rail mounted construction, maintenance and inspection machines \x97 Explanation of machine type | |
| Rapeseed - Determination of glucosinolate content - Spectrometric method for total glucosinolates by glucose release | |
| Reclaimed isobutene-isoprene (IIR) rubber \x97 Evaluation procedure | |
| Reclaimed rubber derived from products containing mainly natural rubber \x97 Evaluation procedure | |
| Reference data distribution in financial services | |
| Reference materials \x97 Examples of reference materials for qualitative properties | |
| Report of pilot testing on the application of ISO smart community infrastructures standards | |
| Resistance welding \x97 Overview of standards for resistance welding | |
| Risk management \x97 Guidance for the implementation of ISO 31000 | |
| Risk management of particulate contamination for devices with intravascular access | |
| Road vehicles - Analysis of technical changes of ISO 5011:2020 | |
| Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of onboard messages presented to drivers | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems | |
| Road vehicles - Extended vehicle (ExVe) web services - Result of the risk assessment on ISO 20078 series | |
| Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters | |
| Road vehicles - Temperature measurement in anthropomorphic test devices - Definition of the temperature sensor locations | |
| Road vehicles - Test contaminants for filter evaluation Part 3: Soot contaminant | |
| Road vehicles \x97 Application of predictive maintenance to hardware with ISO 26262-5 | |
| Road vehicles \x97 Comparison between ISO 26262-12 and other parts of the ISO 26262 series to support motorcycle adaptation | |
| Road vehicles \x97 Control type and layout of transmission gear shifters and drive mode selectors | |
| Road vehicles \x97 Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 5: Dummy design updates | |
| Road vehicles \x97 Electrical disturbances from conduction and coupling Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 | |
| Road vehicles \x97 Functional safety \x97 The application to generic rechargeable energy storage systems for new energy vehicle | |
| Road vehicles \x97 Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment and procedures | |
| Road vehicles \x97 Multimedia data exchange format for impact tests | |
| Road vehicles \x97 Safety and cybersecurity for automated driving systems \x97 Design, verification and validation | |
| Road vehicles \x97 Software update over the air using mobile cellular network | |
| Road vehicles \x97 Solutions for remote access to vehicle \x97 Criteria for risk assessment | |
| Robotics - Application of ISO 13482 Part 1: Safety-related test methods | |
| Robotics \x97 Application of ISO 13482 Part 2: Application guidelines | |
| Robots and robotic devices \x97 Collaborative robots | |
| Rubber and rubber products - Environmental aspects - General guidelines for their inclusion in standards | |
| Rubber materials Chemical resistance | |
| Safety of machinery \x97 Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts | |
| Safety of toys Part 8: Age determination guidelines | |
| Safety of toys Part 9: Safety aspects related to mechanical and physical properties \x97 Comparison of ISO 8124-1, EN 71-1 and ASTM F963 | |
| Safety requirements for lifts (elevators) Part 24: Convergence of lift requirements | |
| Selected illustrations of full factorial experiments with four factors | |
| Service activities relating to drinking water supply, wastewater and stormwater systems - Examples of good practices for stormwater management | |
| Service activities relating to drinking water supply, wastewater and stormwater systems \x97 Hydraulic, mechanical and environmental conditions in wastewater transport systems | |
| Service excellence - Practices for achieving service excellence | |
| Sharing economy - Use cases of sharing economy platforms in the public sector | |
| Ships and marine technology \x97 Good practices of preventing capsizing during turning of ships with large profile height | |
| Smart community infrastructures - Data exchange and sharing for the lamppost network in smart community | |
| Smart community infrastructures - Disaster risk reduction - Survey results and gap analysis | |
| Smart community infrastructures \x97 Common framework for development and operation | |
| Smart community infrastructures \x97 Review of existing activities relevant to metrics | |
| Soil quality - Determination of linear alkylbenzene sulfonate (LAS) - Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD) | |
| Soil quality - Determination of nonylphenols (NP) and nonylphenol mono- and diethoxylates - Method by gas chromatography with mass selective detection (GC-MS) | |
| Soil quality \x97 Determination of mercury \x97 Cold vapour atomic fluorescence spectrometry (CVAFS) | |
| Soil quality \x97 Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) | |
| Soil quality \x97 Environmental availability of non-polar organic compounds \x97 Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent | |
| Solar energy - Pyranometers - Recommended practice for use | |
| Solid biofuels - Bridging behaviour of bulk biofuels | |
| Solid mineral fuel - Major and minor elements in hard coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method | |
| Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials | |
| Space environment (natural and artificial) - Operational estimation of the solar wind energy input into the Earth's magnetosphere by means of the ground-based magnetic polar cap (PC) index | |
| Space environment (natural and artificial) - Space weather information for use in space systems operations | |
| Space systems - Development technology of a thermal vacuum chamber | |
| Space systems - Guidelines to define the management framework for a space project | |
| Space systems - Safety and compatibility of materials - Method to determine the flammability thresholds of materials | |
| Space systems \x97 Study of electrical wire derating | |
| Sports and recreational facilities - Probes for entrapment/entanglem ent on playground equipment - Collection of data | |
| Statistical analysis for evaluating the precision of binary measurement methods and their results | |
| Steel and iron \x97 Review of available methods of analysis | |
| Sterilization of health care products - Radiation Part 4: Guidance on process control | |
| Sterilization of health care products \x97 Radiation \x97 Substantiation of selected sterilization dose: Method VD max SD | |
| Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method | |
| Surface chemical analysis - Glow discharge mass spectrometry - Operating procedures | |
| Sustainability in buildings and civil engineering works \x97 Guidelines on the application of the general principles in ISO 15392 | |
| Sustainable cities and communities - Case studies in how smart city operating models support an effective public-health emergency response | |
| Sustainable development in communities \x97 Inventory of existing guidelines and approaches on sustainable development and resilience in cities | |
| Sustainable finance - Basic concepts and key initiatives | |
| Technical product specification (TPS) - Application guidance - International model for national implementation | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures Part 2: Test method for chemical resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures Part 3: Test method for water (wash out) resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures Part 4: Test method for adhesion on wet concrete surface | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures Part 5: Test method for watertightness | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures Part 6: Test method for response to the substrate movement | |
| Thermoplastics pipes for the conveyance of fluids - Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) | |
| Toughness of chain steels | |
| Tourism and related services \x97 Guidelines on developing environmental specifications for accommodation establishments | |
| Tracked Changes (Redline) - Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys | |
| Tracked Changes (Redline) - Acoustics - Soundscape - Part 3: Data analysis | |
| Tracked Changes (Redline) - Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears - Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears Part 31: Calculation examples of micropitting load capacity | |
| Tracked Changes (Redline) - Connectors for fluid power and general use - Assembly instructions for connectors with adjustable stud ends and O-ring sealing | |
| Tracked Changes (Redline) - Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items | |
| Tracked Changes (Redline) - Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items | |
| Tracked Changes (Redline) - Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items | |
| Tracked Changes (Redline) - Cutting tool data representation and exchange Part 80: Creation and exchange of 3D models - Overview and principles | |
| Tracked Changes (Redline) - Earth-moving machinery - Operator's manual - Part 2: List of references | |
| Tracked Changes (Redline) - Earth-moving machinery and mobile road construction machinery \x97 Worksite data exchange Part 3: Telematics data | |
| Tracked Changes (Redline) - Electrically propelled road vehicles \x97 Vocabulary | |
| Tracked Changes (Redline) - Electronic Fee Collection (EFC) \x97 Application interface definition between DSRC-OBE and external invehicle devices | |
| Tracked Changes (Redline) - Fire safety on lifts - Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation | |
| Tracked Changes (Redline) - Gas cylinders \x97 List of provisions | |
| Tracked Changes (Redline) - Graphic technology \x97 Print quality requirements for printed matter Part 1: Measurement methods and reporting schema | |
| Tracked Changes (Redline) - Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | |
| Tracked Changes (Redline) - Guidelines for the use of ISO 5167:2022 | |
| Tracked Changes (Redline) - Health informatics - Information security management for remote maintenance of medical devices and medical information systems Part 1: Requirements and risk analysis | |
| Tracked Changes (Redline) - Hydraulic fluid power - Method for evaluating the buckling load of a hydraulic cylinder | |
| Tracked Changes (Redline) - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 11: Simplified industrial usage of... | |
| Tracked Changes (Redline) - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Core reference data | |
| Tracked Changes (Redline) - Intelligent transport systems - Vocabulary | |
| Tracked Changes (Redline) - Large outdoor fires and the built environment \x97 Global overview of different approaches to standardization | |
| Tracked Changes (Redline) - Measurement of fluid flow in closed conduits \x97 Guidelines on the effects of flow pulsations on flow-measurement instruments | |
| Tracked Changes (Redline) - Medical devices \x96 Guidance on the application of ISO 14971 | |
| Tracked Changes (Redline) - Nanomaterials - Preparation of safety data sheets (SDS) | |
| Tracked Changes (Redline) - Nanotechnologies \x97 Characterization of carbon nanotube samples using thermogravimetric analysis | |
| Tracked Changes (Redline) - Nanotechnologies \x97 Characterization of multiwall carbon nanotubes \x97 Mesoscopic shape factors | |
| Tracked Changes (Redline) - Nanotechnologies \x97 Characterization of single-wall carbon nanotubes using ultraviolet-visible- near infrared (UV-Vis-NIR) absorption spectroscopy | |
| Tracked Changes (Redline) - Natural gas - Odorization | |
| Tracked Changes (Redline) - Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases - Part 2: Method with water wash-out | |
| Tracked Changes (Redline) - Pulps \x97 Guidelines for using laboratory refiners to simulate industrial low consistency refining | |
| Tracked Changes (Redline) - Qualification of casing connections for thermal wells | |
| Tracked Changes (Redline) - Reclaimed isobutene-isoprene (IIR) rubber \x97 Evaluation procedure | |
| Tracked Changes (Redline) - Reclaimed rubber derived from products containing mainly natural rubber \x97 Evaluation procedure | |
| Tracked Changes (Redline) - Road vehicles \x97 Ergonomic aspects of transport information and control systems \x97 Calibration tasks for methods which assess driver demand due to the use of invehicle... | |
| Tracked Changes (Redline) - Road vehicles \x97 Multimedia data exchange format for impact tests | |
| Tracked Changes (Redline) - Road vehicles \x97 Temperature measurement in anthropomorphic test devices \x97 Definition of the temperature sensor locations | |
| Tracked Changes (Redline) - Road vehicles \x97 Test contaminants for filter evaluation \x97 Part 3: Soot contaminant | |
| Tracked Changes (Redline) - Sports and recreational facilities - Probes for entrapment/entanglem ent on playground equipment - Collection of data | |
| Tracked Changes (Redline) - Surface chemical analysis - Glow discharge mass spectrometry - Operating procedures | |
| Tracked Changes (Redline) - Sustainability in buildings and civil engineering works - Guidelines on the application of the general principles in ISO 15392 | |
| Tracked Changes (Redline) - Technical product specification (TPS) - Application guidance - International model for national implementation | |
| Tracked Changes (Redline) - Water quality \x97 Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) | |
| Transaction assurance in E-commerce - After-sales services | |
| Translation projects - General guidance | |
| Transportation of CO2 by ship | |
| Tyres, valves and tubes - kPa/psi equivalencies for inflation pressures | |
| UAS traffic management (UTM) Part 1: Survey results on UTM | |
| Validation method for fire gas analysis Part 3: Considerations related to interlaboratory trials | |
| Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test | |
| Visualization elements of PLM-MES interface Part 1: Overview | |
| Vulcanized crumb rubber \x97 Evaluation procedures | |
| Water aggressiveness evaluation and optimized lining choice | |
| Water quality - Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) | |
| Water quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS) | |
| Water quality - Determination of selected parameters by discrete analysis systems Part 2: Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection | |
| Water quality \x97 Polymerase chain reaction (PCR) for the detection and quantification of microorganisms and viruses \x97 General requirements, quality assurance and validation | |
| Welding and allied processes - Vocabulary Part 1: General terms | |
| Welding and allied processes - Vocabulary Part 4: Arc welding | |
| Welding and allied processes \x97 Vocabulary Part 3: Welding processes | |
| Wheelchair seating Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity | |
| Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing | |
| Wheelchair seating Part 14: Concepts related to managing external forces to maintain tissue integrity | |
| Wheelchair seating Part 15: Selection, placement and fixation of flexible postural support devices in seating | |
| Wood and wood-based products \x97 Background and examples of calculating contributions to carbon stored in harvested wood products (HWP) | |
| Wood and wood-based products \x97 Examples of calculating displacement potentials for wood-based products and considerations for further analyses | |
| Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment |
| << Prev | Next >> |