Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| AASHTO Practitioner's Handbook - Complying with Section 4(f) of the U.S. DOT Act | |
| AASHTO Practitioner's Handbook - Consulting Under Section 106 of the National Historic Preservation Act | |
| AASHTO Practitioner's Handbook - Defining the Purpose and Need and Determining the Range of Alternatives for Transportation Projects | |
| AASHTO Practitioner's Handbook - Developing and Implementing a Stormwater Management Program in a Transportation Agency | |
| AASHTO Practitioner's Handbook - Developing and Implementing an Environmental Management System in a State Department of Transportation (DOT) | |
| AASHTO Practitioner's Handbook - Maintaining a Project File and Preparing an Administrative Record for a NEPA Study | |
| AASHTO Practitioner's Handbook - Managing the NEPA Process for Toll Lanes and Toll Roads | |
| AASHTO Practitioner's Handbook - Responding to Comments on an Environmental Impact Statement | |
| AASHTO Practitioner's Handbook - Tracking Compliance with Environmental Commitments/Use of Environmental Monitors | |
| AASHTO Practitioner's Handbook - Using the SAFETEA-LU Environmental Review Process (23 U.S.C. \xa7 139) | |
| AASHTO Practitioner's Handbook - Using the Transportation Planning Process to Support the NEPA Process | |
| AASHTO Practitioner's Handbook - Utilizing Community Advisory Committees for NEPA Studies | |
| AASHTO Practitioner\x92s handbook - Applying the Section 404(b)(1) Guidelines in Transportation Project Decision-Making | |
| AASHTO PRACTITIONER\x92S HANDBOOK - PREPARING HIGH-QUALITY NEPA DOCUMENTS FOR TRANSPORTATION PROJECTS | |
| Analysis of natural gas - Biomethane - Determination of amines content | |
| Animal welfare management \x97 General requirements and guidance for organizations in the food supply chain | |
| Asset management \x97 Guidance on the alignment of financial and non-financial functions in asset management | |
| Biological evaluation of absorbable medical devices Part 1: General requirements | |
| Biotechnology - Predictive computational models in personalized medicine research Part 1: Constructing, verifying and validating models | |
| Bumper Test | |
| Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method | |
| Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) \x97 Integral temperature method | |
| Calculation of load capacity of spur and helical gears Part 22: Calculation of micropitting load capacity | |
| Calculation of load capacity of spur and helical gears Part 4: Calculation of tooth flank fracture load capacity | |
| Change Management | |
| Child care articles \x97 General safety Part 2: Mechanical hazards | |
| Child Restraint Systems | |
| Cigarettes \x97 Determination of loss of tobacco from the ends Part 3: Method using a vibro-bench | |
| Clean Room Specification | |
| Clean-In-Place (CIP) Skid-Mounted System Specification | |
| CLEVISES, RIGGING, AIR DELIVERY TYPE: GENERAL SPECIFICATION FOR | |
| CLOTH AND SHEETING POLYESTER AND COTTON BLEND | |
| CLOTH, AIRPLANE | |
| CLOTH, COATED, PARACHUTE, NYLON | |
| CLOTH, DUCK, NYLON, 12.5 OUNCE | |
| CLOTH, DUCK, NYLON | |
| CLOTH, DUCK, PLIED-YARNS, DYED, ARMY DUCK | |
| CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED | |
| CLOTH, NETTING, PARACHUTE SKIRT EXTENSION, NYLON, RASCHEL KNIT | |
| CLOTH, NETTING; NYLON OR POLYESTER | |
| CLOTH, PARACHUTE, 240-PERMEABILITY; FOR USE WITH UNDERWATER ORDNANCE | |
| CLOTH, PARACHUTE, 240-PERMEABJLITY; FOR USE WITH UNDERWATER ORDNANCE | |
| CLOTH, PARACHUTE, NYLON, CARGO AND DECELERATION | |
| CLOTH, PARACHUTE, NYLON, LOW PERMEABILITY | |
| CLOTH, PARACHUTE, NYLON-RIP STOP AND TWILL WEAVE | |
| CLOTH, PARACHUTE, NYLON | |
| CLOTH, PARACHUTE, SYNTHETIC FIBER (FOR AMMUNITION PARACHUTES) | |
| CLOTH, SATEEN, COTTON, DYED | |
| Coal - Determination of carboxyreactivity | |
| Coal - Determination of the thermal stability and thermal fragmentation | |
| Collaborative business relationship management - Guidelines for university-business collaboration | |
| Collaborative business relationship management \x97 Guidance for ecosystem collaborations | |
| COMMERCIAL SPECIFICATION CORD, NYLON, BRAIDED, TUBULAR, SPLICEABLE | |
| Communication Type Battery Chargers | |
| Competence requirements for biorisk management advisors | |
| CORD, ELASTIC, EXERCISER AND SHOCK ABSORBER, FOR AERONAUTICAL USE | |
| CORD, FIBROUS, ARAMID BRAIDED | |
| CORD, FIBROUS, NYLON | |
| CORD, NYLON, BRAIDED, TUBULAR, SPLICEABLE | |
| CORD, NYLON, CORELESS | |
| CORD, POLYESTER, CORELESS | |
| CORD, SPECTRA, CORELESS | |
| Cycles \x97 Safety requirements for bicycles Part 10: Safety requirements for electrically power assisted cycles (EPACs) | |
| Data quality Part 150: Master data: Quality management framework | |
| Data quality Part 311: Guidance for the application of product data quality for shape (PDQ-S) | |
| Data quality Part 60: Data quality management: Overview | |
| Data quality Part 65: Data quality management: Process measurement questionnaire | |
| Data quality Part 81: Data quality assessment: Profiling | |
| Data quality Part 82: Data quality assessment: Creating data rules | |
| Dentistry - Test methods for tensile bond strength to tooth structure | |
| Design and operation of allocation systems used in gas productions facilities | |
| Determination and use of polynomial calibration functions | |
| Digital fitting - Service process Part 1: Ready-to-wear clothing online and offline | |
| Digital fitting - Service process Part 2: Customized clothing online and offline | |
| Dimensioning, Tolerancing, Surface Texture, and Metrology Standards \x97 Rules for Drawings With Incomplete Reference to Applicable Drawing Standard | |
| Document management - Portable Document Format - Adding support of AES-GCM in PDF 2.0 | |
| Document management - Portable Document Format - Extensions to Hash Algorithm Support in ISO 32000- 2 (PDF 2.0) | |
| Document management - Portable Document Format - Integrity protection in encrypted documents in PDF 2.0 | |
| Document management - Portable Document Format - PDF 1.7 and 2.0 structure namespace inclusion in ISO 32000-2 | |
| Document management - Portable Document Format \x97 Extensions to Digital Signatures in ISO 32000-2(PDF 2.0) | |
| Document management \x97 Portable Document Format \x97 RichMedia annotations conforming to glTF assets | |
| Document Review and Approval | |
| Documentation Requirements for Hygienic Stainless Steel and Nickel Alloy Vessels ASME Code Section VIII, Divisions 1 and 2 | |
| Earth-moving machinery - Multilingual listing of equivalent terms Part 2: Performance and dimensions | |
| Earth-moving machinery \x97 Multilingual listing of equivalent terms Part 1: General | |
| EC Directives, Functional Safety and the Role of CENELEC Standardization | |
| Electronic Entry Data Sheet for Clean Rooms | |
| Electronic Entry Data Sheet for Hygienic Process Spray Devices | |
| Electronic Entry Data Sheet for Hygienic Stainless Steel and Nickel Alloy Vessels ASME Code Section VIII, Divisions 1 and 2 | |
| Electronic Entry Data Sheet for Product Recovery (Hygienic Pigging) System Specification | |
| Electronic Entry Data Sheets for Clean-In-Place (CIP) Skid-Mounted Systems | |
| Electronic Entry Data Sheets for Hygienic Process Mixed-Proof Valves | |
| Electronic Entry Data Sheets for Hygienic Pumps in Food, Consumer Goods and Pharmaceutical Industries (Centrifugal, Positive Displacement and Air Operated Diaphragm Pumps) | |
| Electronic System Specification Languages - Standard Method for Building VHDL Models of Component Libraries | |
| Electronic System Specification Languages - VHDL Modelling Guidelines | |
| Energy management and energy savings \x97 Building energy data management for energy performance \x97 Guidance for a systemic data exchange approach | |
| Energy saving projects (EnSPs) \x97 Guidelines for economic and financial evaluation | |
| Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices | |
| Ergonomics of human-system interaction Part 126: Guidance on the presentation of auditory information | |
| Ergonomics of human-system interaction Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress | |
| Ergonomics of human-system interaction Part 620: The role of sound for users of interactive systems | |
| Escalators and moving walks Part 3: Requirements from other standards (ASME A17.1/CSA B44 and Japanese codes) not included in ISO 8103-1 | |
| Escalators and moving walks Part 6: Safety parameters meeting the GESRs | |
| Everyday Pocket Handbook for Arc Welding Steel | |
| Everyday Pocket Handbook for Gas Metal Arc and Flux Cored Arc Welding | |
| Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) of Aluminum | |
| Everyday Pocket Handbook for Shielded Metal Arc Welding | |
| Everyday Pocket Handbook on Metric Practices for the Welding Industry | |
| Everyday Pocket Handbook on Welded Joint Details for Structural Applications | |
| Exchange formats for audit data collection - Customs and indirect tax extension: XML and JSON | |
| Exchange formats for audit data collection - Government regulated financial reports and payroll extension: XML and JSON | |
| FEDERAL SPECIFICATION CLOTH, DUCK, COTTON, UNBLEACHED, PLIED-YARNS ARMY AND NUMBERED | |
| Fine bubble technology \x97 Environmental applications Part 1: Inspection method using online particle counter in dissolved air flotation (DAF) plant | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Physical properties of ceramic composites - Guidelines for determination of void and fibre contents in polished cross section by image analysis | |
| FINISH, FLOOR, WATER-EMULSION (FOR USE ON LIGHT COLORED FLOORS) | |
| Fire safety engineering - Selection of design occupant behavioural scenarios | |
| Freight containers \x97 NFC or/and QR code seals | |
| Functional requirements for disposition of records | |
| GALVANIZED FERROUS BOLT-TYPE INSULATOR PINS WITH LEAD THREADS | |
| GALVANIZED FERROUS CROSSARM GAINS | |
| GALVANIZED FERROUS EYE BOLTS | |
| GALVANIZED FERROUS EYENUTS AND EYELETS | |
| GALVANIZED FERROUS GROUND RODS | |
| GALVANIZED FERROUS GUY ATTACHMENTS, WRAP AND FORMED GUY HOOKS, GUY STRAIN PLATES, AND POLE EYE PLATES | |
| GALVANIZED FERROUS INSULATOR CLEVISES | |
| GALVANIZED FERROUS LAG SCREWS | |
| GALVANIZED FERROUS POLE-TOP INSULATOR PINS WITH LEAD THREADS | |
| GALVANIZED FERROUS SINGLE AND DOUBLE UPSET SPOOL INSULATOR BOLTS | |
| GALVANIZED FERROUS UNDERGROUND CABLE RACKS AND CABLE RACK HOOKS | |
| GALVANIZED FERROUS WASHER HEAD BOLTS AND WASHER NUTS | |
| GALVANIZED FERROUS WASHERS | |
| GALVANIZED STEEL BOLTS AND NUTS | |
| Genomics informatics - Data elements and their metadata for describing the microsatellite instability (MSI) information of clinical massive parallel DNA sequencing | |
| Genomics informatics - Data elements and their metadata for describing the tumor mutation burden (TMB) information of clinical massive parallel DNA sequencing | |
| Genomics informatics - Description rules for genomic data for genetic detection products and services | |
| Genomics informatics - Requirements for interoperable systems for genomic surveillance | |
| GLASS CLEANER, LIQUID (CONCENTRATED AND READY-TO-USE) | |
| Guidance for Technology Audit of Fibre Optic Connector Kits and Terminated Connectors | |
| Guidance on quality of water for sterilizers, sterilization and washer-disinfectors for health care products | |
| Guide to EMC Conformity of Apparatus Designed for Military and Other Purposes | |
| Guide to IEC 61800-9-2 \x97 Determining Loss of Power Drive Systems (PDSs) in Extended Products | |
| Guideline for Manufacturing Prognostics and Health Management (PHM): Determining PHM Inclusion in Factory Operations | |
| Guideline for Project Engineering | |
| Guidelines for contributing to the United Nations Sustainable Development Goals (SDGs) | |
| Guidelines for security framework of information systems of third-party payment services | |
| Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications | |
| HAND CLEANER, WATERLESS (DUPLICATING INK AND GREASE) | |
| HANDCLEANER PAD | |
| Hard Coal - Determination of plastometric indices - Manual method | |
| HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR | |
| Health Informatics - Categorial structure for representation of Traditional Chinese Medicine clinical decision support system | |
| Health informatics - Categorial structure of representation for evaluation of clinical practice guidelines of traditional Chinese medicine | |
| Health informatics - Conceptual data model for Chinese medicinal herbs | |
| Health informatics - Cybersecurity framework for telehealth environments Part 2: Cybersecurity reference model of telehealth | |
| Health informatics - General requirements of multi-centre medical data collaborative analysis | |
| Health informatics - Internet healthcare service pattern | |
| Health informatics - Reference architecture for syndromic surveillance systems for infectious diseases | |
| Health informatics - Traditional Chinese medicine - Labelling metadata of human biological sample information | |
| Health informatics \x97 Categorial structure and data elements for the identification and exchange of immunization data | |
| Health Informatics \x97 Categorial structures for representation of Ayurvedic medicinal water \x97 Decocting process in Ayurveda | |
| Health informatics \x97 Cybersecurity framework for telehealth environments Part 1: Overview and concepts | |
| Health informatics \x97 Guidelines for exchanging data generated by portable polymerase chain reaction (PCR) devices for point-of-care testing (POCT) between screening centre and clinical laboratory | |
| Health informatics \x97 Guidelines for self-assessment questionnaire systems | |
| Health informatics \x97 Information model for quality control of traditional Chinese medicinal products | |
| Health informatics \x97 Personalized digital health framework | |
| Health informatics \x97 Standardized data set for transfer of hemodialysis patients | |
| Health informatics \x97 The architecture of internet healthcare service network | |
| Health software and health IT systems safety, effectiveness and security Part 2-1: Coordination - Guidance and requirements for the use of assurance cases for safety and security | |
| Heat Treatment of Steel, Process for | |
| Human resource management - Compliance and ethics metrics cluster | |
| Human resource management - Employee engagement metrics | |
| Human resource management - Impact of hire metric | |
| Human resource management - Learning and development metrics | |
| Human resource management - Skills and capabilities metrics cluster | |
| Human resource management - Turnover and retention metrics | |
| Human resource management \x97 Cost-Per-Hire | |
| Human resource management \x97 Costs metrics cluster | |
| Human resource management \x97 Leadership metrics cluster | |
| Human resource management \x97 Quality of hire metric | |
| Human resource management \x97 Recruitment metrics cluster | |
| Human resource management \x97 Succession planning metrics cluster | |
| Human resource management \x97 Workforce availability metrics cluster | |
| Human resource management \x97 Workforce productivity metrics cluster | |
| Hygienic Bronze Ball Valve Descriptions | |
| Hygienic Bronze Check Valve Descriptions | |
| Hygienic Pipe Support Details | |
| Hygienic Plastic and Plastic Lined Butterfly Valve Descriptions | |
| Hygienic Plastic Diaphragm Valve Descriptions | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SA0E01; 304/304L Stainless Steel, C.A.-None, Ramax 32\xb5in (0.81 \xb5m) ID Finish, FKM Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SA0E02; 304/304L Stainless Steel, C.A.-None, Ramax 32\xb5in (0.81 \xb5m) ID Finish, EPDM Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SA0E03; 304/304L Stainless Steel, C.A.-None, Ramax 32\xb5in (0.81 \xb5m) ID Finish, PTFE Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SD0E01; 316/316L Stainless Steel, C.A.-None, RaMAX 32\xb5in (0.81 \xb5m) ID Finish, FKM Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SD0E02; 316/316L Stainless Steel, C.A.-None, RaMAX 32\xb5in (0.81 \xb5m) ID Finish, EPDM Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process for Food/Beverage/Consum er and CGMP Products Tubing Material Specification F14SD0E03; 316/316L Stainless Steel, C.A.-None, RaMAX 32\xb5in (0.81 \xb5m) ID Finish, PTFE Seals Construction: Buttweld and Hygienic Clamped Unions... | |
| Hygienic Process Material Specification 000BK0U01 Copper Tubing, 0.000" C.A. Nonflammable Medical Gas Systems, Mill ID Finish, Mill OD Finish, PTFE Seals/Seats, Brazed Joint Construction | |
| Hygienic Process Material Specification 014SD0E01 316/316L Stainless Steel, C.A. \x96 None, Hygienic Product & Clean In Place Systems SF0 ID Finish, SF0 OD Finish, FKM Seals Hygienic Construction Clamped/Joined Unions... | |
| Hygienic Process Material Specification 014SD0E02 316/316L Stainless Steel, C.A. \x96 None, Hygienic Product & Clean In Place Systems SF0 ID Finish, SF0 OD Finish, EPDM Seals Hygienic Construction Clamped/Joined Unions... | |
| Hygienic Process Material Specification 014SD0E03 316/316L Stainless Steel, C.A. - None, Hygienic Product & Clean In-Place Systems SF0 ID Finish, SF0 OD Finish, PTFE Seals Hygienic Construction Clamped/Joined Unions | |
| Hygienic Process Material Specification 014SD0E04 316/316L Stainless Steel, 0.000" C.A. Process Gases & Clean Steam Systems, SF0 ID Finish, SF0 OD Finish, PTFE and SS Blended Seals for Hygienic Construction... | |
| Hygienic Process Material Specification 414SD0E01 316/316L Stainless Steel, 0.000" C.A. Hygienic Product & Clean In Place Systems SF4 ID Finish, SF0 OD Finish, FKM Seals Hygienic Construction Clamped/Joined Unions | |
| Hygienic Process Material Specification 414SD0E03 316/316L Stainless Steel, 0.000 C.A., Hygienic Product & Clean In-Place Systems SF4 ID Finish, SF0 OD Finish, PTFE Seals Hygienic Construction Clamped/Joined Unions | |
| Hygienic Process Material Specification 414SD0E04 316/316L Stainless Steel, 0.000" C.A. Process Gases & Clean Steam Systems, SF4 ID Finish, SF0 OD Finish, PTFE and SS Blended Seals for Hygienic Construction... | |
| Hygienic Process Material Specification XP0PK0H01 High Purity PVDF Pipe, 0.000" C.A., Butt Fusion Welded, SFP1 ID Finish = 10\x94, SFP2 ID Finish = 12\x94, PTFE Seals/Seats | |
| Hygienic Process Mixed-Proof Valve Specification | |
| Hygienic Process Piping Line Class Designator System | |
| Hygienic Process Spray Devices Specification | |
| Hygienic Stainless Steel Ball Valve Descriptions | |
| Hygienic Stainless Steel Butterfly Valve Descriptions | |
| Hygienic Stainless Steel Check Valve Descriptions | |
| Hygienic Stainless Steel Diaphragm Valve Descriptions | |
| Hygienic Stainless Steel Other Valve Descriptions | |
| Hygienic Valve Commodity Codes Designator System | |
| In vitro diagnostic test systems - Requirements and recommendations for detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by nucleic acid amplification methods | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 3: Application rules for a reference designation system | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations Part 101: Modelling concepts, guidelines and requirements for power supply systems | |
| Industrial systems, installations and equipment and industrial products \x97 Structuring principles and reference designation Part 10: Power plants | |
| Industrial trucks - Safety requirements and verification Part 8: Regional requirements for countries outside the European Community | |
| Information and documentation \x97 RFID in libraries Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory | |
| Innovation management - Illustrative examples of ISO 56000 | |
| Intelligent transport systems - Event-based probe vehicle data | |
| Intelligent transport systems - Freight land conveyance content identification and communication (FLC-CIC) Part 2: Application interface profiles | |
| Intelligent transport systems - Guided transportation service planning data exchange | |
| Intelligent transport systems - Low-speed automated driving system (LSADS) service Part 1: Role and functional model | |
| Intelligent transport systems - Parking Part 1: Core data model | |
| Intelligent transport systems - Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations Part 1: Secure vehicle interface framework and architecture | |
| Intelligent transport systems - Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations Part 2: Specification of the secure vehicle interface | |
| Intelligent transport systems \x97 Field device Simple Network Management Protocol (SNMP) data interface Part 1: Global objects | |
| Intelligent transport systems \x97 Secure interfaces governance \x97 Minimum requirements and governance procedures | |
| Internal investigations of organizations \x97 Guidance | |
| Ionospheric Factors Affecting Frequency Sharing in the VHF (30-300 MHz) Band | |
| Iron ores - Determination of sulfur content Part 1: Barium sulfate gravimetric method | |
| Iron ores - Determination of various elements by X-ray fluorescence spectrometry Part 4: Performance-based method using fusion preparation method | |
| Iron ores \x97 Determination of total iron content Part 4: Potentiometric titration method | |
| Iron ores \x97 Determination of various elements by X-ray fluorescence spectrometry Part 2: Single element calibration procedure | |
| Language resource management \x97 Semantic annotation framework (SemAF) Part 5: Discourse structure (SemAF-DS) | |
| Laser diffraction measurements \x97 Good practice | |
| Lifts for the transport of persons and goods Part 21: Global safety parameters (GSPs) meeting the global essential safety requirements (GESRs) | |
| Lifts for the transport of persons and goods Part 22: Prerequisites for certification of lifts, model lifts, lift components and lift functions | |
| Lifts for the transport of persons and goods Part 23: Requirements for bodies certifying lifts, model lifts, lift components and lift functions | |
| Lifts for the transport of persons and goods Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS A 4307-1/JIS A 4307-2) not included in ISO 8100-1 or ISO... | |
| Light and lighting \x97 Building information modelling properties for lighting \x97 Lighting systems | |
| List of Interpretations on the EN 60730 Series "Automatic Electrical Controls for Household and Similar Use" | |
| Lubricants, industrial oils and related products (Class L) \x97 Family D (Compressors) Part 2: Specifications of categories DAG, DAH and DAJ (Lubricants for flooded rotary air compressors) | |
| Management of terminology resources \x97 TBX-compliant representation of concept relations and subject fields | |
| METAL CROSSARM BRACES | |
| Metallic Industrial Piping - Part 7: Guidance on the Use of Conformity Assessment Procedures | |
| Microfluidic pumps - Symbols and performance communication | |
| Milk and milk products - Determination of alkaline phosphatase activity - Fluorimetric microplate method | |
| Mitigation of Pure Tin Risk by Tin-Lead SMT Reflow \x96 Results of an Industry Round-Robin \x96 Final Report | |
| Molecular biomarkers \x97 Detection of DNA in cotton used for textile production Part 2: Overview of target sequences for use in polymerase chain reaction (PCR)- based detection methods for cotton... | |
| Nanotechnologies - Extraction method of nanomaterials from lung tissue by proteinase K digestion | |
| Nanotechnologies - Lung burden mass measurement of nanomaterials for inhalation toxicity tests | |
| Nanotechnologies - Performance evaluation of nanosuspensions containing clay nanoplates for quorum quenching | |
| Nanotechnologies - Toxicity assessment and bioassimilation of manufactured nano-objects in suspension using the unicellular organism Tetrahymena sp. | |
| Nanotechnologies - Vocabulary - Liposomes | |
| Nanotechnologies - Vocabulary Part 12: Quantum phenomena in nanotechnology | |
| Nanotechnologies - Vocabulary Part 13: Graphene and related two-dimensional (2D) materials | |
| Nanotechnologies \x97 Assessment of peroxidase-like activity of metal and metal oxide nanoparticles | |
| Nanotechnologies \x97 Classification framework for graphene-related 2D materials | |
| Nanotechnologies \x97 Vocabulary Part 11: Nanolayer, nanocoating, nanofilm, and related terms | |
| Nanotechnologies \x97 Vocabulary Part 6: Nano-object characterization | |
| NEC POCKET GUIDE TO COMMERCIAL AND INDUSTRIAL ELECTRICAL INSTALLATIONS | |
| NEC POCKET GUIDE TO RESIDENTIAL ELECTRICAL INSTALLATIONS | |
| NFPA POCKET GUIDE TO SPRINKLER SYSTEM INSTALLATION | |
| Non-invasive sphygmomanometers Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers | |
| Occupant Crash Protection | |
| Occupant Protection in Interior Impact | |
| Ophthalmic optics - Contact lenses - Tolerances and methods for measurement of multifocal contact lens addition power | |
| Orthotics \x97 Method for testing the reliability of microprocessor-contr olled ankle moment units of ankle-foot orthoses | |
| Overview of the Foundry Process | |
| PACKAGING GUIDELINES FOR PRODUCTION PARTS | |
| Packaging Standards for Aluminum Conductor and ACSR | |
| Paediatric Orthopaedics: A System of Decision-Making | |
| Pallets for materials handling \x97 Flat pallets Part 4: Procedure for predicting creep responses in stiffness tests for plastic pallets using regression analyses | |
| Parachutes, Personnel, Detail Manufacturing Instruction for | |
| Parts Division Publication 100 Registered and Standard Mechanical Outlines for Electronic Parts | |
| Pb-free Design & Assembly Implementation Guide | |
| Pediatric Endocrinology: Growth, Adrenal, Sexual, Thyroid, Calcium, and Fluid Balance Disorders | |
| Pediatric Trauma: Pathophysiology, Diagnosis, and Treatment | |
| Penetration Testing with Raspberry Pi | |
| Pentaho 3.2 Data Integration: Beginner's Guide | |
| Pentaho Data Integration Beginner's Guide | |
| Performance Bond and Payment Bond; Instruction Sheet A312A-84 | |
| Performance Testing With JMeter 2.9 | |
| Performance Testing with JMeter | |
| PERMEABILITY OF POROUS MEDIA TO LIQUIDS AND GASES | |
| Perry's Chemical Engineers' Handbook, Eighth Edition | |
| PERSONNEL SAFETY INCLUDES THE FOLLOWING API STANDARDS: STD 2217A, RP 2016, STD 2220RP 2221, RP 54, RP 74, STD 2015 | |
| PETROCHEMICAL FACILITY THREE-BOOK SET | |
| Petroleum and natural gas industries - Arctic operations - Material requirements for arctic operations | |
| Petroleum Guidelines in Your Community | |
| PETROLEUM INDUSTRY ENVIRONMENTAL PERFORMANCE (PIEP) - ANNUAL REPORT | |
| Petroleum Process Stream Term Included in the Chemical Substances Inventory Under the Toxic Substances Control Act (TSCA) | |
| Petroleum Products - Determination of the Oxidation Stability of Middle-Distillate Fuels (CEN EN ISO 12205: 1996) | |
| Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase | |
| Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations | |
| pfSense 2 Cookbook | |
| pH of Sand | |
| Phenolic Duct Construction Standards | |
| PhoneGap 3 Beginner\x92s Guide | |
| Photovoltaic Devices - Part 6: Requirements for Reference Solar Modules; (EN 60904-6:1994) | |
| Physician's Guide to Arthropods of Medical Importance | |
| Pinnacles Component Information Standard 1.2 - PCIS Sample Documents | |
| Pinnacles Component Information Standard 1.2 - PCIS Tutorial | |
| Piping Material Specification 314SD0E05 316/316L Stainless Steel, C.A. - None Hygienic Product & Clean In Place Systems SF3 ID Finish, SF0 OD Finish, PTFE/EPDM Seals Hygienic Construction Clamped/Joined Unions | |
| Piping Material Specification 414SD0E02 316/316L Stainless Steel, 0.000" C.A. Hygienic Product & Clean In Place Systems SF4 ID Finish, SF0 OD Finish, EPDM Seals Hygienic Construction Clamped/Joined Unions | |
| Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions Part 3: Functions for calculation of tilting pad journal bearings | |
| Plain bearings \x97 Hydrodynamic plain journal bearings under steady-state conditions Part 1: Calculation of multi-lobed and tilting pad journal bearings | |
| Plain bearings \x97 Hydrodynamic plain journal bearings under steady-state conditions Part 2: Functions for calculation of multilobed journal bearings | |
| Plain bearings \x97 Hydrodynamic plain journal bearings under steady-state conditions Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings | |
| PLASTIC RISER U-GUARD | |
| PLASTIC TREE GUARDS | |
| Plastics - Determination of J-R curves - Fracture toughness | |
| Plastics - Thermosetting resin-based materials - Low-temperature cracking index test by embedded metal block method | |
| Plastics \x97 Method of exposure to electrodeless plasma radiation sources | |
| Plastics \x97 Test method of exposure to white LED lamps | |
| Playground and recreational areas - Framework for the competence of playground inspectors and playground maintenance technicians | |
| Pocket Guide for Visual Examination of Welds - Discontinuity Causes and Remedies | |
| POCKET GUIDE TO FIRE ALARM AND SIGNALING SYSTEM INSTALLATION | |
| Pocket Guide to Hazardous Materials | |
| PRACTITIONER\x92S HANDBOOK ADDRESSING AIR QUALITY ISSUES IN THE NEPA PROCESS FOR HIGHWAY PROJECTS | |
| PRACTITIONER\x92S HANDBOOK ASSESSING INDIRECT EFFECTS AND CUMULATIVE IMPACTS UNDER NEPA | |
| PRACTITIONER\x92S HANDBOOK COMPLYING WITH SECTION 7 OF THE ENDANGERED SPECIES ACT FOR TRANSPORTATION PROJECTS | |
| PRACTITIONER\x92S HANDBOOK IMPLEMENTING ECO-LOGICAL: INTEGRATING TRANSPORTATION PLANNING AND ECOLOGICAL DECISION MAKING | |
| Preston\x92s Guide CD-ROM | |
| Process Safety Management Guideline | |
| Product Recovery (Hygienic Pigging) System Specification | |
| Project Estimating | |
| Quality management systems - Particular requirements for the application of ISO 9001:2015 for electoral organizations at all levels of government | |
| Quality management systems \x97 Guidelines for the application of ISO 9001:2015 | |
| Railway Applications - Communication, Signalling and Processing Systems - Hazardous Failure Rates and Safety Integrity Levels (SIL) | |
| Railway Applications - Guide for the Use of the Terminology for Testing Procedures | |
| Railway Applications - Guide to the Specification of a Guided Transport System | |
| Railway Specifications - Systematic Allocation of Safety Integrity Requirements | |
| Reaction-to-fire tests - Heat release, smoke production and mass loss rate Part 3: Guidance on measurement | |
| Reaction-to-fire tests \x97 Heat release, smoke production and mass loss rate Part 4: Measurement of low levels of heat release | |
| Reaction-to-fire tests \x97 Heat release, smoke production and mass loss rate Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres | |
| Reference materials for particle size measurement \x97 Specification of requirements | |
| Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies | |
| Requirements and recommendations for training programmes in community interpreting | |
| Risk management - Guidelines for managing an emerging risk to enhance resilience | |
| Road vehicles - Advanced automatic collision notification (AACN) systems - Methodology for creating and validating algorithms for injury level prediction | |
| Road vehicles - Anti-fog coating for exterior lighting devices - Specification | |
| Road Vehicles - Electrical disturbance by conduction and coupling Part 4: Electrical transient conduction along shielded high voltage supply lines only | |
| Road vehicles - Safety for automated driving systems - Design, verification and validation | |
| Road vehicles \x97 Driver readiness and intervention management Part 1: Partial automation (Level 2) | |
| Road vehicles \x97 Visibility \x97 Requirements and recommendations for automotive interior display systems | |
| Rubber latex coated fabric gloves - Specification | |
| Rubber, unvulcanized - Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate | |
| Safety of Household and Similar Electrical Appliances - Interpretations Related to European Standards within the Scope of CENELEC/TC 61 | |
| Safety of Machinery - Guidance and Recommendations for the Avoidance of Hazards Due to Static Electricity | |
| Scope of Work | |
| Sharing economy - General trustworthiness and safety requirements for digital platform | |
| Sharing economy - Guidance for provider verification on digital platforms | |
| Short-range wireless sensor to device communication | |
| SKY-WAVE FIELD STRENGTH PREDICTION METHOD FOR PROPAGATION TO AIRCRAFT AT ABOUT 500 IrHz | |
| SKY-WAVE FIELD STRENGTH PREDICTION METHOD FOR PROPAGATION TO AIRCRAFT AT ABOUT 500 kHz | |
| Smart community infrastructures - Data exchange and sharing for community infrastructures based on geographic information | |
| Smart community infrastructures \x97 Principles and requirements for performance metrics | |
| Social responsibility and sustainable development - Guidance on using ISO 26000:2010 in the food chain | |
| Soil and water quality - Guidance document on designing an interlaboratory trial for validation of biotests | |
| Space systems - Design, testing and operation of a large constellation of spacecraft | |
| Specification for Hygienic Pumps in Food, Consumer Goods and Pharmaceutical Industries (Centrifugal, Positive Displacement and Air Operated Diaphragm Pumps) | |
| Specification for Mixers, Blenders, and Agitators Used in Hygienic Applications | |
| Sports and recreational facilities \x97 Impact surfacing testing device | |
| Standard tests for measuring reaction-to-fire of products and materials \x97 Their development and application | |
| STAPLES WITH ROLLED OR SLASH POINTS | |
| Steel and steel products - Vocabulary relating to chemical analysis | |
| Steering Control Reward Displacement | |
| Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts | |
| Suggester Filler Materials and Minimum Preheat Temperatures for Welding Steel Pipe with Wall Thickness Less than 3/4", Wall and Desk Charts | |
| Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry | |
| Sustainable cities and communities - Maturity model for smart sustainable communities | |
| The Everyday Pocket Handbook for Visual Inspection and Weld Discontinuities | |
| The Everyday Pocket Handbook for Visual Inspection of AWS D1.1 Structural Welding Code\xb4s Fabtication and Welding Requirements | |
| THREADED GALVANIZED FERROUS STAND-EYE ANCHOR RODS | |
| Title Absent | |
| Tool for Incorporating Human Factors During Process Hazard Analysis (PHA) Reviews of Plant Designs | |
| Tracked Changes (Redline) - Asset management - Guidance on the alignment of financial and non-financial functions in asset management | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature... | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) \x97 Integral temperature... | |
| Tracked Changes (Redline) - Calculation of load capacity of spur and helical gears Part 22: Calculation of micropitting load capacity | |
| Tracked Changes (Redline) - Design and operation of allocation systems used in gas productions facilities | |
| Tracked Changes (Redline) - Industrial trucks \x97 Safety requirements and verification Part 8: Regional requirements for countries outside the European Community | |
| Tracked Changes (Redline) - Information and documentation - RFID in libraries - Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned... | |
| Tracked Changes (Redline) - Iron ores - Determination of sulfur content - Part 1: Barium sulfate gravimetric method | |
| Tracked Changes (Redline) - Lifts for the transport of persons and goods - Part 22: Prerequisites for certification of lifts, model lifts, lift components and lift functions | |
| Tracked Changes (Redline) - Lifts for the transport of persons and goods - Part 23: Requirements for bodies certifying lifts, model lifts, lift components and lift functions | |
| Tracked Changes (Redline) - Lifts for the transport of persons and goods Part 21: Global safety parameters (GSPs) meeting the global essential safety requirements (GESRs) | |
| Tracked Changes (Redline) - Management of terminology resources \x97 TermBase eXchange (TBX)-compliant representation of concept relations and subject fields | |
| Tracked Changes (Redline) - Road vehicles - Safety for automated driving systems - Design, verification and validation | |
| Tracked Changes (Redline) - Surface chemical analysis \x97 Analysis of metal oxide films by glow-discharge opticalemission spectrometry | |
| Transmittal Letter Preparation Guideline | |
| Troubleshooting for Printed Board Manufacture and Assembly | |
| Uninterruptible Power Systems | |
| UTILITY TYPE BATTERY CHARGERS | |
| Vacuum technology - Vacuum gauges - Characteristics for a stable ionisation vacuum gauge | |
| Water quality - Determination of selected non-polar substances - Method using gas chromatography with mass spectrometric detection (GC-MS) | |
| Water quality - Guidance and requirements for designing an interlaboratory trial for validation of analytical methods | |
| Water quality - Sampling Part 25: Guideline on the validation of the storage time of water samples |
| << Prev | Next >> |