Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| A typology of language registers | |
| Account-based ticketing state of the art report | |
| Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results | |
| Acoustics - Software for the calculation of sound outdoors Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1 | |
| Acoustics \x97 Software for the calculation of sound outdoors Part 2: General recommendations for test cases and quality assurance interface | |
| Adventure tourism \x97 Leaders \x97 Personnel competence | |
| Aerospace electrical requirements - Sleeves and moulded shapes - Specifications for aircraft use | |
| Agricultural irrigation equipment - Test facilities for agricultural irrigation equipment - Part 2: Test facility operating manual | |
| Agricultural irrigation equipment \x97 Test facilities for agricultural irrigation equipment Part 1: General | |
| Anodizing of aluminium and its alloys - Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test - Evaluation of correlations | |
| Application examples for using reaction-to-fire test data for fire safety engineering | |
| Application of blockchain-based traceability platform for cold chain food | |
| Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel | |
| Application of ubiquitous public access to-geographic information to an air quality information service | |
| Applications of statistical and related methods to new technology and product development process Part 8: Guidelines for commercialization and life cycle | |
| Artificial recharge to groundwater | |
| Assistive products for tissue integrity when lying down Part 7: Foam properties, characteristics and performance | |
| Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling | |
| Automation systems and integration - The Big Picture of standards | |
| Automation systems and integration \x97 Industrial data \x97 Nuclear digital ecosystem specifications | |
| Automation systems and integration \x97 Key performance indicators (KPIs) for manufacturing operations management Part 10: Operational sequence description of data acquisition | |
| Automation systems and integration \x97 Use case of capability profiles for cooperation between manufacturing software units | |
| Background information and guidance on environmental cyanide analysis | |
| Basic considerations for the safety of hydrogen systems | |
| Biological evaluation of medical devices - Guidance on the conduct of biological evaluation within a risk management process | |
| Biotechnology \x97 Biobanking \x97 Implementation guide for ISO 20387 | |
| Blockchain and distributed ledger technologies \x97 Privacy and personally identifiable information protection considerations | |
| Building construction machinery and equipment - Classification | |
| Building environment design \x97 List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency | |
| Buildings and civil engineering works - Sealants - Paintability and paint compatibility of sealants | |
| Buildings and civil engineering works \x97 Seismic resilience assessment and strategies \x97 Compilation of relevant information | |
| Buildings and constructed assets \x97 Service life planning Part 11: Terminology | |
| Business requirements for health summary records Part 1: Requirements | |
| Business requirements for health summary records Part 2: Environmental scan | |
| Calculation of micro-pitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles | |
| Calculation of micro-pitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting | |
| Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products Part 2: Local regulatory information | |
| Cast Irons \x97 Classification and designation of casting imperfections | |
| Centrifugal pumps handling viscous liquids Performance corrections | |
| Ceramic tiles \x97 Guidelines for installation Part 1: Installation of ceramic wall and floor tiles | |
| Ceramic tiles \x97 Guidelines for installation Part 2: Installation of thin ceramic wall and floor tiles and panels | |
| Cigarettes - Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke - Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances... | |
| Clean cookstoves and clean cooking solutions - Guidelines for social impact assessment | |
| Clean cookstoves and clean cooking solutions \x97 Harmonized laboratory test protocols Part 3: Voluntary performance targets for cookstoves based on laboratory testing | |
| Clean cookstoves and clean cooking solutions \x97 Vocabulary | |
| Cleanrooms and associated controlled environments Part 21: Airborne particle sampling techniques | |
| Comparison of Worldwide Escalator and Moving Walk Safety Standards - Part 2: Abbreviated Comparison and Comments | |
| Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison | |
| Comparison of worldwide safety standards on lifts for firefighters | |
| Compressors - Classification - Complementary information to ISO 5390 | |
| Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development | |
| Corrosion of metals and alloys \x97 Corrosion tests in artificial atmospheres \x97 Guidelines for selection of accelerated corrosion test for product qualification | |
| Corrosion of metals and alloys \x97 Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids | |
| Corrosion of metals and alloys \x97 Test method for corrosion of materials by electrochemical impedance measurements | |
| Cosmetics - Analytical methods - Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics | |
| Cosmetics \x97 Analytical approach for screening and quantification methods for heavy metals in cosmetics | |
| Cosmetics \x97 Analytical method \x97 Detection and quantitative determination of Diethanolamine (DEA) by GC/MS | |
| Cosmetics \x97 Calculation of organic indexes of hydrolates \x97 Supplemental information for ISO 16128-2 | |
| Cosmetics \x97 Guidelines on the stability testing of cosmetic products | |
| Cosmetics \x97 Methods of extract evaporation and calculation of organic indexes \x97 Supplemental information to use with ISO 16128-2 | |
| Cranes - Safety code on mobile cranes | |
| Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series | |
| Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing | |
| Dentistry - Digital impression devices Part 2: Methods for assessing accuracy for implanted devices | |
| Dentistry - Vocabulary of process chain from dental CT to CAD/CAM for implant prosthetic restorations - Backward planning in the digital process chain | |
| Dentistry \x97 Test methods for machining accuracy of computer-aided milling machines | |
| Design recommendations for bevel gears | |
| Design using geosynthetics Part 10: Asphalt pavements | |
| Design using geosynthetics Part 1: General | |
| Design using geosynthetics Part 2: Separation | |
| Design using geosynthetics Part 3: Filtration | |
| Design using geosynthetics Part 4: Drainage | |
| Design using geosynthetics Part 5: Stabilization | |
| Design using geosynthetics Part 6: Protection | |
| Design using geosynthetics Part 7: Reinforcement | |
| Design using geosynthetics Part 9: Barriers | |
| Determination of the resistance to jet fires of passive fire protection Part 2: Guidance on classification and implementation methods | |
| Determination of Uncertainty for Volume Measurements Made Using the Gravimetric Method | |
| Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method | |
| Document management - Change management for successful electronic document management system (EDMS) implementation | |
| Document management \x97 Analysis, selection and implementation of enterprise content management (ECM) systems | |
| Document management \x97 Digital file format recommendations for long-term storage | |
| Document management \x97 Digital preservation \x97 Analog recording to silver-gelatin microform | |
| Document management \x97 Electronically stored information \x97 Recommendations for trustworthiness and reliability | |
| Document management \x97 Environmental and work place safety regulations affecting microfilm processors | |
| Dynaload \x97 Design and construction \x97 Use and maintenance | |
| Earth-moving machinery \x97 Conformity assessment and certification process | |
| Elastomeric seismic-protection isolators Part 7: Relationship of the ISO 22762 series to the design and testing of seismic isolation systems | |
| Electric mopeds and motorcycles \x97 Terminology and classification | |
| Electronic archiving \x97 Selection of digital storage media for long term preservation | |
| Electronic fee collection \x97 Investigation of charging policies and technologies for future standardization | |
| Electronic fee collection \x97 Investigation of EFC standards for common payment schemes for multi-modal transport services | |
| Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification | |
| Environmental Management - Examples of Environmental Performance Evaluation (EPE) | |
| Environmental management - Guidelines for establishing good practices for combatting land degradation and desertification Part 2: Regional case studies | |
| Environmental Management - Life Cycle Assessment - Examples of Application of ISO 14041 to Goal and Scope Definition and Inventory Analysis | |
| Environmental management Integrating environmental aspects into product design and development | |
| Environmental management Life cycle impact assessment Examples of application of ISO 14042 | |
| Ergonomics - Manual handling of people in the healthcare sector | |
| Ergonomics \x97 Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226) | |
| Ergonomics \x97 Recovery model for cyclical industrial work | |
| Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities | |
| Essential Oils - General Rules for Labelling and Marking Containers | |
| Essential Oils - General Rules for Packaging, Conditioning and Storage | |
| Evaluating the performance of continuous air monitors Part 1: Air monitors based on accumulation sampling techniques | |
| Evaluating the performance of continuous air monitors Part 2: Air monitors based on flow-through sampling techniques without accumulation | |
| Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass | |
| Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-contain ing polymer composites | |
| Fans - System effects and system effect factors | |
| Fatigue - Fatigue testing of welded components - Guidance | |
| Financial services - Recommendations on cryptographic algorithms and their use | |
| Financial services - Semantic technology Part 2: OWL representation of the ISO 20022 metamodel and e-repository | |
| Financial services - Semantic technology Part 5: Mapping from FIX Orchestra to the common model | |
| Financial services \x97 Information security guidelines | |
| Financial services \x97 Semantic technology Part 3: Semantic enrichment of the ISO 20022 conceptual model | |
| Fine bubble technology - Agricultural applications Part 3: Guidelines for the minimum viable number concentration of ultrafine bubbles for promoting the germination of barley seeds | |
| Fine bubble technology - Agricultural applications Part 5: Practical data collection to promote the germination of typical vegetable seeds using ultrafine bubbles | |
| Fine bubble technology \x97 Measurement technique matrix for the characterization of fine bubbles | |
| Fire resistance tests \x97 Guidelines for computational structural fire design | |
| Fire safety \x97 Overview of national fire statistics practices | |
| Fire safety engineering - Fire risk assessment Part 3: Example of an industrial property | |
| Fire safety engineering - Survey of performance-based fire safety design practices in different countries | |
| Fire safety engineering \x97 Assessment, verification and validation of calculation methods Part 2: Example of a fire zone model | |
| Fire safety engineering \x97 Assessment, verification and validation of calculation methods Part 3: Example of a CFD model | |
| Fire safety engineering \x97 Assessment, verification and validation of calculation methods Part 4: Example of a structural model | |
| Fire safety engineering \x97 Assessment, verification and validation of calculation methods Part 5: Example of an Egress model | |
| Fire safety engineering \x97 Examples of fire safety objectives, functional requirements and safety criteria | |
| Fire Safety Engineering \x97 Fire risk assessment Part 2: Example of an office building | |
| Fire-resistance tests - Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 2: Non-loadbearing elements | |
| Footwear - Performance requirements for components for footwear - Heels and top pieces | |
| Fuel cell road vehicles - Cold start performances under sub-zero temperature - Vehicles fuelled with compressed hydrogen | |
| Further clarification of ISO 28580 | |
| Gas cylinders - Guidance for design of composite cylinders Part 1: Stress rupture of fibres and burst ratios related to test pressure | |
| Gas cylinders - Information for design of composite cylinders Part 5: Impact testing of composite cylinders | |
| Gas cylinders - Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing | |
| Gas cylinders \x97 Classification of imperfections arising during the manufacture of seamless steel and aluminium alloy gas cylinders | |
| Gas cylinders \x97 Guidance for design of composite cylinders Part 2: Bonfire test issues | |
| Gas cylinders \x97 Guidance for design of composite cylinders Part 3: Calculation of stress ratios | |
| Gas cylinders \x97 Guidance for design of composite cylinders Part 4: Cyclic fatigue of fibres and liners | |
| Gas cylinders \x97 Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes | |
| Gas cylinders \x97 Service life testing for cylinders and tubes of composite construction | |
| Gears - Calculation of load capacity of wormgears | |
| General practices for the repair of water-leakage cracks in concrete structures | |
| Geographic Information \x97 Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues | |
| Geographic information/ Geomatics Qualification and certification of personnel | |
| Geometrical product specifications (GPS) - Filtration Part 32: Robust profile filters: Spline filters | |
| Good practice for dynamic light scattering (DLS) measurements | |
| Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment | |
| Graphic technology - Guidelines for the use of standards for print media production | |
| Graphic technology - Laboratory test method for chemical ghosting in lithography | |
| Graphic Technology - Statistics of the Natural SCID Images Defined in ISO 12640 | |
| Graphic technology and photography - Colour characterization of digital still cameras (DSCs) | |
| Graphic technology and photography \x97 Colour characterization of digital still cameras (DSCs) Part 3: User controls and readouts for scene-referred imaging applications | |
| Graphic technology and photography \x97 Colour characterization of digital still cameras (DSCs) Part 5: Colour targets including saturated colours for colour characteristic evaluation test for colorimetric image capture | |
| Greenhouse gases - Quantification and reporting of greenhouse gas emissions for organizations - Guidance for the application of ISO 14064-1 | |
| Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models | |
| Guidance for uncertainty analysis regarding the application of ISO/TS 10974 | |
| Guidance on marine environment zonation for steel corrosion embedded in concrete | |
| Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom | |
| Guidance on the development and use of ISO statistical publications supported by software | |
| Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator | |
| Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters | |
| Guidance on transition periods for standards developed by ISO/TC 84 \x97 Devices for administration of medicinal products and catheters | |
| Guidelines for good practices in zetapotential measurement | |
| Guidelines for good XRF laboratory practice for the iron ore industry | |
| Guidelines for the Appplication of the ISO 7176 Series on Wheelchairs | |
| Guidelines for the characterization of dispersion stability | |
| Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement | |
| Health and safety in welding \x97 Guidelines for risk assessment of welding fabrication activities | |
| Health and safety in welding and allied processes \x97 Arc welding fume components | |
| Health informatics - Capacity-based eHealth architecture roadmap Part 1: Overview of national eHealth initiatives | |
| Health informatics - Guidance on the identification and authentication of connectable Personal Healthcare Devices (PHDs) | |
| Health informatics - Guidelines for terminology development organizations | |
| Health informatics - Personal health records - Definition, scope and context | |
| Health informatics - Security requirements for archiving of electronic health records - Guidelines | |
| Health informatics \x97 Capacity-based eHealth architecture roadmap Part 2: Architectural components and maturity model | |
| Health informatics \x97 Cloud computing considerations for the security and privacy of health information systems | |
| Health informatics \x97 Guidance on health information privacy education in healthcare organizations | |
| Health informatics \x97 Guidance on standards for enabling safety in health software | |
| Health informatics \x97 Identification of medicinal products \x97 Core principles for maintenance of identifiers and terms | |
| Health informatics \x97 Medication management concepts and definitions | |
| Health informatics \x97 Person-owned document repository for PHR applications and health information exchange | |
| Health informatics \x97 Principles and guidelines for the measurement of conformance in the implementation of terminological systems | |
| Health informatics \x97 Provisions for health applications on mobile/smart devices | |
| Health informatics \x97 Re-usable component strategy for use case development | |
| Health informatics \x97 Survey of mHealth projects in low and middle income countries (LMIC) | |
| Health informatics Good principles and practices for a clinical data warehouse | |
| Health informatics interoperability and compatibility in messaging and communication standards Key characteristics | |
| Health informatics Interoperability of telehealth systems and networks Part 1: Introduction and definitions | |
| Health informatics Interoperability of telehealth systems and networks Part 2: Real-time systems | |
| Health informatics Use of mobile wireless communication and computing technology in healthcare facilities Recommendations for the management of unintentional electromagnetic interference with medical devices | |
| Heat recovery ventilators and energy recovery ventilators \x97 Method of test for performance Part 2: Assessment of measurement uncertainty of performance parameters | |
| Human response to vibration \x97 Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety... | |
| Hydraulic fluid power - Impact and use of ISO 11171:2016 \xb5m(b) and \xb5m(c) particle size designations on particle count and filter test data | |
| Hydraulic fluid power - Methods to assess the reliability of hydraulic components Part 1: General procedures and calculation method | |
| Hydraulic fluid power - Two-, three-and four-port screw-in cartridge valves - Cavities with ISO 725 (UN and UNF) threads | |
| Hydraulic fluid power \x97 Application notes for the optimization of the energy efficiency of hydraulic systems | |
| Hydraulic fluid power contamination control - General principles and guidelines for selection and application of hydraulic filters | |
| Hydraulic fluid power Hose assemblies Part 2: Recommended practices for hydraulic hose assemblies | |
| Hydrometry \x97 Groundwater \x97 Surface geophysical surveys for hydrogeological purposes | |
| Hydrometry \x97 Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360 | |
| Imaging Materials - Protocols for Outdoor Weathering Experiments | |
| Imaging materials \x97 Evaluation of image permanence of photographic colour prints in consumer home applications | |
| Imaging materials \x97 Pictorial colour reflection prints \x97 Comparison of image degradation observed between ISO 18930 accelerated weathering test method and outdoor exposure | |
| Impact of changes in ISO fluid power particle counting \x97 Contamination control and filter test standards | |
| Impact test procedures for road vehicles \x97 Rear seat positioning procedures for Hybrid III 5th percentile female dummy | |
| Implants for surgery \x97 Essential principles of safety and performance | |
| Industrial automation systems and integration - Standardized procedures for production systems engineering Part 1: Overview | |
| Information and documentation - Implementation guidelines for digitization of records | |
| Information and documentation - Performance indicators for electronic library services | |
| Information and Documentation - Records Management - Part 2: Guidelines | |
| Information and documentation - Trusted third party repository for digital records | |
| Information and documentation \x96 Collections management for archives and libraries | |
| Information and documentation \x97 Appraisal for managing records | |
| Information and documentation \x97 Description and presentation of rights information | |
| Information and documentation \x97 Management of the environmental conditions for archive and library collections | |
| Information and documentation \x97 Records management in enterprise architecture | |
| Information and documentation \x97 Risk assessment for records processes and systems | |
| Information and documentation \x97 Statistics and quality issues for web archiving | |
| Information and documentation. Managing metadata for records. Self-assessment method | |
| Information technology for learning, education and training \x97 Learning analytics interoperability Part 2: System requirements | |
| Information to Assist Forestry Organizations in the Use of Envionmental Management System Standards ISO 14001 and ISO 14004 | |
| Intelligent transport systems (ITS) - Communications - ITS communication role and functional model | |
| Intelligent transport systems (ITS) - Network based precise positioning infrastructure for land transportation Part 1: General information and use case definitions | |
| Intelligent transport systems (ITS) - Nomadic device service platform for micro-mobility Part 1: General information and use case definitions | |
| Intelligent transport systems - Collection of agent behaviour information and sharing between ITS stations | |
| Intelligent transport systems - Cooperative ITS Part 10: Driver distraction and information display | |
| Intelligent transport systems - Cooperative ITS Part 4: Minimum system requirements and behaviour for core systems | |
| Intelligent transport systems - Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices | |
| Intelligent transport systems - Information interface framework between automated driving systems and users | |
| Intelligent transport systems - Integrated transport information, management and control - Data quality in ITS systems | |
| Intelligent transport systems - Interactive centrally determined route guidance (CDRG) - Air interface message set, contents and format | |
| Intelligent transport systems - Interoperability between interoperable fare management (IFM) systems and near field communication (NFC) mobile devices | |
| Intelligent transport systems - Mobility integration - ITS data aggregation role and functional model | |
| Intelligent transport systems - Mobility integration - Role and functional model for mobility services using low Earth orbit (LEO) satellite systems | |
| Intelligent transport systems - Performance testing for connectivity and safety functions of automated driving buses in public transport Part 3: Service framework and use cases | |
| Intelligent transport systems - Spatio-temporal data dictionary for cooperative ITS and automated driving systems | |
| Intelligent transport systems - System architecture - Privacy aspects in ITS standards and systems | |
| Intelligent transport systems - Using UML for defining and documenting ITS/TICS interfaces | |
| Intelligent transport systems - Vehicle interface for provisioning and support of ITS services Part 1: General information and use case definition | |
| Intelligent transport systems - Vehicle/roadway warning and control systems - Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems | |
| Intelligent transport systems \x97 Common Transport Service Account Systems Part 1: Framework and use cases | |
| Intelligent transport systems \x97 Cooperative ITS Part 1: Terms and definitions | |
| Intelligent transport systems \x97 Cooperative ITS Part 2: Framework overview | |
| Intelligent transport systems \x97 Cooperative ITS Part 2: Guidelines for standards documents | |
| Intelligent transport systems \x97 Cooperative ITS Part 3: Concept of operations (ConOps) for \x91core\x92 systems | |
| Intelligent transport systems \x97 Cooperative ITS Part 3: Release procedures for standards documents | |
| Intelligent transport systems \x97 Cooperative ITS Part 6: \x91Core system\x92 risk assessment methodology | |
| Intelligent transport systems \x97 Cooperative ITS Part 7: Privacy aspects | |
| Intelligent transport systems \x97 Cooperative ITS Part 8: Liability aspects | |
| Intelligent transport systems \x97 Cooperative ITS Part 9: Compliance and enforcement aspects | |
| Intelligent transport systems \x97 Cooperative systems \x97 State of the art of Local Dynamic Maps concepts | |
| Intelligent transport systems \x97 Emergency evacuation and disaster response and recovery Part 1: Framework and concept of operation | |
| Intelligent transport systems \x97 Framework for green ITS (G-ITS) standards Part 1: General information and use case definitions | |
| Intelligent transport systems \x97 Graphic data dictionary Part 2: Examples | |
| Intelligent transport systems \x97 Guidance protocol via personal ITS station for advisory safety systems Part 1: General information and use case definitions | |
| Intelligent transport systems \x97 Mobility integration \x97 Physical and functional view | |
| Intelligent transport systems \x97 Pre-emption of ITS communication networks for disaster and emergency communication \x97 Use case scenarios | |
| Intelligent transport systems \x97 Public transport requirements for the use of payment applications for fare media | |
| Intelligent transport systems \x97 Public transport user information Part 2: Public transport data and interface standards catalogue and cross references | |
| Intelligent transport systems \x97 Public transport user information Part 3: Use cases for journey planning systems and their interoperation | |
| Intelligent transport systems \x97 The use of simulation models for evaluation of traffic management systems \x97 Input parameters and reporting template for simulation of traffic signal control systems | |
| Intelligent transportation systems - Energy-based green ITS services for smart city mobility applications via nomadic and mobile devices Part 1: General information and use case definitions | |
| Iron ores \x97 Determination of chlorine content \x97 X-ray fluorescence spectrometric method | |
| Iron ores \x97 Determination of loss on ignition \x97 Nono-xidised ores | |
| Iron ores \x97 Wavelength dispersive X-ray fluorescence spectrometers \x97 Determination of precision | |
| ISO and Health Canada intense smoking parameters Part 1: Results of an international machine smoking study | |
| ISO and Health Canada intense smoking parameters Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes | |
| Language coding \x97 A framework for language varieties Part 2: Description of the framework | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold Part 4: Inspection, detection and measurement | |
| Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE | |
| Lifts, escalators and passenger conveyors - Comparison of worldwide standards on electromagnetic interference/electro magnetic compatibility | |
| Long-term preservation of electronic document-based information | |
| Lubrication of industrial gear drives | |
| Machine tool spindles \x96 Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 3: Gear-driven spindles with rolling bearings operating at speeds between 600 r/min and 12... | |
| Machine tool spindles \x97 Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600... | |
| Machine tool spindles \x97 Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min... | |
| Machine tools \x97 Numerical compensation of geometric errors | |
| Machine tools \x97 Practical guidance and example of risk assessment on electro-discharge machines | |
| Managing records in cloud computing environments Part 1: Issues and concerns | |
| Matcha tea - Definition and characteristics | |
| Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 | |
| Measurement of fluid flow by means of pressure-differentia l devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 | |
| Measurement uncertainties in mechanical tests on metallic materials \x97 The evaluation of uncertainties in tensile testing | |
| Mechanical joining \x97 Guidelines for fatigue testing of joints | |
| Mechanical vibration \x97 Measurement and evaluation of human exposure to hand transmitted vibration \x97 Supplementary method for assessing risk of vascular disorders | |
| Mechanical vibration \x97 Methodology for selecting appropriate machinery vibration standards | |
| Medical devices \x97 Examples of the application of the risk management process to cardiac valve replacement and repair systems | |
| Medical devices \x97 Pump tube spallation test \x97 General procedure | |
| Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices | |
| Medical devices Quality management systems Guidance on the application of ISO 13485:2003 | |
| Medical devices utilizing animal tissues and their derivatives Part 4: Principles for elimination and/or inactivation of transmissible spongiform encephalopathy (TSE) agents and validation assays for those processes | |
| Medical electrical equipment - Deployment, implementation and operational guidelines for indentifying febrile humans using a screening thermograph | |
| Methods of testing cement \x97 Report of a test programme \x97 Chemical analysis by x-ray fluorescence | |
| Molecular biomarker analysis \x97 SSR analysis of maize | |
| Molecular biomarker analysis \x97 SSR analysis of sunflower | |
| Nanomaterials - Preparation of material safety data sheet (MSDS) | |
| Nanotechnologies - Characterization of cellulose nanocrystals | |
| Nanotechnologies - Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices | |
| Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment | |
| Nanotechnologies - Health and safety practices in occupational settings relevant to nanotechnologies | |
| Nanotechnologies - High throughput screening method for nanoparticles toxicity using 3D model cells | |
| Nanotechnologies - Matrix of properties and measurement techniques for graphene and related two-dimensional (2D) materials | |
| Nanotechnologies - Model taxonomic framework for use in developing vocabularies - Core concepts | |
| Nanotechnologies - Nanomaterial risk evaluation | |
| Nanotechnologies - Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs) | |
| Nanotechnologies - Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability | |
| Nanotechnologies \x97 Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) | |
| Nanotechnologies \x97 Compilation and description of toxicological screening methods for manufactured nanomaterials | |
| Nanotechnologies \x97 Considerations for in vitro studies of airborne nano-objects and their aggregates and agglomerates (NOAA) | |
| Nanotechnologies \x97 Considerations for performing toxicokinetic studies with nanomaterials | |
| Nanotechnologies \x97 Considerations for the development of chemical nomenclature for selected nano-objects | |
| Nanotechnologies \x97 Framework for identifying vocabulary development for nanotechnology applications in human healthcare | |
| Nanotechnologies \x97 Measurement technique matrix for the characterization of nano-objects | |
| Nanotechnologies \x97 Plain language explanation of selected terms from the ISO/IEC 80004 series | |
| Nanotechnologies \x97 Sample preparation for the characterization of metal and metaloxide nano-objects in water samples | |
| Natural gas - Calculation of methane number | |
| Natural gas - Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) | |
| Natural gas - Odorization | |
| Natural gas \x97 Coal-based synthetic natural gas quality designation and the applicability of ISO/TC 193 standards | |
| Natural Gas \x97 Wet gas flow measurement in natural gas operations | |
| Naturalistic driving studies \x97 Vocabulary Part 1: Safety critical events | |
| Non-active surgical implants \x97 Implant coating Part 2: Reference standards related to coatings | |
| Ophthalmic implants - Intraocular lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications | |
| Ophthalmic instruments - Background for light hazard specification in ophthalmic instrument standards | |
| Ophthalmic optics - Review of the test methods used to assess scratch and abrasion resistance of spectacle lenses | |
| Ophthalmic optics \x97 Spectacle lenses \x97 Short wavelength visible solar radiation and the eye | |
| Ophthalmic optics and instruments - Correlation of optotypes | |
| Ophthalmic optics and instruments \x97 Free form technology \x97 Spectacle lenses and measurement | |
| Optics and photonics - Lasers and laser-related equipment - Laser-induced molecular contamination testing | |
| Optics and photonics - Microlens arrays Part 5: Guidance on testing | |
| Optics and photonics - Test methods for surface imperfections of optical elements Part 2: Machine vision | |
| Optics and photonics - Wavefront sensors for characterising optical systems and optical components | |
| Optics and photonics \x97 Preparation of drawings for optical elements and systems \x97 Surface imperfection specification and measurement systems | |
| Optics and photonics Interferometric measurement of optical elements and optical systems Part 1: Terms, definitions and fundamental relationships | |
| Optics and photonics Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation techniques | |
| Optics and photonics Interferometric measurement of optical elements and optical systems Part 3: Calibration and validation of interferometric test equipment and measurements | |
| Optics and photonics Lasers and laserrelated equipment Measurement and evaluation of absorption-induced effects in laser optical components | |
| Packaging and the environment \x97 Information on environmentally conscious packaging design | |
| Packaging and the environment \x97 Marking for material identification | |
| Packaging material recycling \x97 Report on substances and materials which may impede recycling | |
| Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings | |
| Paints and varnishes \x97 Adhesion of coatings | |
| Patient and client eye protectors for use during laser or intense light source (ILS) procedures - Guidance | |
| Personal protective equipment for firefighters \x97 Standard terms and definitions | |
| Petroleum and Natural Gas Industries - Classification and Conformity Assessment of Products, Processes and Services | |
| Petroleum and natural gas industries - Drilling and production equipment Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report | |
| Petroleum and natural gas industries \x97 Guidelines for the marine interfaces of hybrid LNG terminals | |
| Petroleum products - Equivalency of test method determining the same property Part 2: Density of petroleum products | |
| Petroleum products \x97 Characterization of marine fuels by viscosity-gravity constant | |
| Petroleum products \x97 Equivalency of test method determining the same property Part 100: Background and principle of the comparison and the evaluation of equivalency | |
| Petroleum products \x97 Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products | |
| Petroleum, petrochemical and natural gas industries \x97 Reliability modelling and calculation of safety systems | |
| Photography - Electronic still picture imaging terminology Part 2: Other defined terms | |
| Photography \x97 Archiving systems Part 1: Best practices for digital image capture of cultural heritage material | |
| Photography \x97 Guidelines for reliable testing of digital still cameras | |
| Photography \x97 Photographic reflection prints Part 1: Evaluation methods of image quality | |
| Plain bearings \x97 Spray nozzle type directed lubrication for tilting pad bearings | |
| Plastics - Guidance on fire characteristics and fire performance of PVC materials used in building applications | |
| Plastics - Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions | |
| Plastics \x97 Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance | |
| Plastics \x97 Standard table for reference global solar spectral irradiance at sea level \x97 Horizontal, relative air mass 1 | |
| Plastics piping systems - Multilayer M (metal) pipes - Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone... | |
| Pneumatic fluid power \x97 Application notes for the improvement of the energy efficiency of pneumatic systems | |
| Pneumatic fluid power \x97 Assessment of component reliability by accelerated life testing \x97 General guidelines and procedures | |
| Pneumatic fluid power Cylinders Load capacity of pneumatic slides and their presentation method | |
| Practical guidelines for socioterminology | |
| Preparation of metallographic specimens | |
| Preparation of steel substrates before application of paints and related products \x97 Analytical colorimetry method to support visual assessment of surface preparation grades | |
| Project, programme and portfolio management \x97 Vocabulary | |
| Pyrogenicity \x97 Principles and methods for pyrogen testing of medical devices | |
| Railway applications \x97 Rail project planning process Part 1: Stakeholders and their needs/interests | |
| Railway applications \x97 Rail project planning process Part 2: Conditions | |
| Railway applications \x97 Railway project planning process \x97 Guidance on railway project planning | |
| Reclaimed rubbers and reclaimed crumb rubbers - Evaluation of dispersion in rubber mixes | |
| Reference data for financial services - Overview of identification of financial instruments | |
| Reference materials \x97 Establishing and expressing metrological traceability of quantity values assigned to reference materials | |
| Resilience of buildings and civil engineering works | |
| Review of geospatial and building information modelling (BIM) terminological entries | |
| Review of human smoking behaviour and recommendations for a new ISO standard for the machine smoking of cigarettes | |
| Rheological test methods - Fundamentals and interlaboratory comparisons Part 1: Determination of the yield point | |
| Rheological test methods \x97 Fundamentals and interlaboratory comparisons Part 2: Determination of the time-dependent structural change (thixotropy) | |
| Road vehicles - Calculation processes for the neck injury criteria in rear impact | |
| Road vehicles - Dummies for restraint system testing Part 2: Child dummies | |
| Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Radiated immunity for V2X | |
| Road vehicles - Ergonomic aspects of transport information and control systems - Introduction to integrating safety critical and time critical warning signals | |
| Road vehicles - Extended vehicle (ExVe) web services Part 4: Control | |
| Road vehicles - Human performance and state in the context of automated driving Part 2: Considerations in designing experiments to investigate transition processes | |
| Road vehicles - Injury risk curves for the THOR dummy | |
| Road vehicles - Prospective safety performance assessment of pre-crash technology by virtual simulation Part 1: State-of-the-art and general method overview | |
| Road vehicles - Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags | |
| Road vehicles - Traffic accident analysis Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity | |
| Road vehicles - Traffic accident analysis Part 4: Compilation of methodologies for assessment of vehicle safety system effectiveness | |
| Road vehicles \x97 Dummies for restraint system testing Part 1: Adult dummies | |
| Road Vehicles \x97 Ergonomic aspects of external visual communication from automated vehicles to other road users | |
| Road vehicles \x97 Human performance and state in the context of automated driving Part 1: Common underlying concepts | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 5: Application programmers interface (API) | |
| Road vehicles \x97 Objective rating metrics for dynamic systems | |
| Road vehicles \x97 Test procedures for evaluating child restraint system interactions with deploying air bags | |
| Road vehicles Injury risk curves for evaluation of occupant protection in side impact | |
| Robotics \x97 Safety design for industrial robot systems Part 1: End-effectors | |
| Robotics \x97 Safety requirements for industrial robots Part 2: Manual load/unload stations | |
| Rolling bearings - Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life | |
| Rolling bearings - Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses | |
| Rotodymanic pumps \x97 Hydraulic performance acceptance test using a model pump | |
| Rubber - Estimation of uncertainty for test methods - Non-functional parameters | |
| Rubber - Measurement of the aromaticity of oil in reclaimed rubbers | |
| Rubber \x97 Comprehensive review of the composition and nature of process fumes in the rubber industry | |
| Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel | |
| Rubber, vulcanized \x97 Guidelines for material specification | |
| Safety of machinery - Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards | |
| Safety of machinery \x97 Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards | |
| Safety of machinery \x97 Relationship with ISO 12100 Part 2: How ISO 12100 relates to ISO 13849-1 | |
| Safety of machinery \x97 Relationship with ISO 12100 Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects | |
| Safety of machinery \x97 Relationship with ISO 12100 Part 5: Implications of artificial intelligence machine learning | |
| Safety of machinery \x97 Safeguarding supportive system | |
| Safety of machinery Guidelines for the understanding and use of safety of machinery standards | |
| Security and resilience \x97 Urban resilience \x97 Framework and principles | |
| Selected illustrations of fractional factorial screening experiments | |
| Selected illustrations of gauge repeatability and reproducibility studies | |
| Selected illustrations of response surface method \x97 Central composite design | |
| Series 1 freight containers \x97 Handling and securing \x97 Rationale for ISO 3874:2017, Annexes A to E | |
| Sludge recovery, recycling, treatment and disposal - Guidance on thermal treatment of sludge | |
| Sludge recovery, recycling, treatment and disposal - Information on the processes and technologies for inorganic substance and nutrient recovery | |
| Soil quality \x97 Detection of water soluble chromium(VI) using a ready-to-use test-kit method | |
| Solid recovered fuels \x97 Guidance for the specification of solid recovered fuels (SRF) for selected uses | |
| Space environment (natural and artificial) \x97 Method of the solar energetic protons fluences and peak fluxes determination | |
| Space systems - Best practices for orbit elements at payload - LV separation | |
| Space systems - Space batteries - Guidelines for in-flight health assessment of lithium-ion batteries | |
| Space systems - Space launch complexes, integration sites and other facilities - General testing guidelines | |
| Space systems \x97 Avoiding collisions with orbiting objects | |
| Space systems \x97 Debris mitigation design and operation manual for launch vehicle orbital stages | |
| Space systems \x97 Design guidelines for multi-geo spacecraft collocation | |
| Space systems \x97 Space debris mitigation design and operation guidelines for spacecraft | |
| Spherical plain bearings \x97 Derivation of the load rating factors | |
| Sports and other recreational facilities and equipment \x97 Injury and safety definitions and thresholds \x97 Guidelines for their inclusion in standards | |
| Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis | |
| Statistical methods for implementation of Six Sigma = Selected illustration of analysis of variance | |
| Statistical methods for implementation of Six Sigma \x97 Selected illustrations of distribution identification studies | |
| Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures | |
| Statistical methods in process management - Capability and performance Part 9: Process capability statistics for characteristics defined by geometrical specifications | |
| Surface chemical analysis - Characterization of nanostructured materials | |
| Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer | |
| Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings | |
| Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation | |
| Surface chemical analysis \x97 Characterization of functional glass substrates for biosensing applications | |
| Surface chemical analysis \x97 Depth profiling \x97 Measurement of sputtered depth | |
| Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution, analysis area, and sample area viewed by the analyser | |
| Surface chemical analysis Auger electron spectroscopy Derivation of chemical information | |
| Sustainability in buildings and civil engineering works \x97 A review of terminology | |
| Sustainable mobility and transportation - Sustainable mobility services Part 1: Use cases | |
| Symbol libraries for construction and facilities management | |
| Technical aspects of nut design | |
| Technical Product Documentation - Metadata for Construction Documentation | |
| Test code for machine tools - Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations | |
| Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests | |
| Test code for machine tools Part 8: Determination of vibration levels | |
| Test facilities for agricultural irrigation equipment | |
| Textiles \x97 Determination of certain flame retardants Part 3: Chlorinated paraffin flame retardants | |
| Thermal spraying \x97 Powders Part 2: Comparison of coating performance and spray powder chemistry | |
| Three statistical approaches for the assessment and interpretation of measurement uncertainty | |
| Timber structures \x97 Timber connections and assemblies \x97 Determination of yield and ultimate characteristics and ductility from test data | |
| Tissue-engineered medical products \x97 Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging | |
| Toughness of round steel link chains \x97 Test with sub-size specimens | |
| Tracked Changes (Redline) - Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters | |
| Tracked Changes (Redline) - Biological evaluation of medical devices - Guidance on the conduct of biological evaluation within a risk management process | |
| Tracked Changes (Redline) - Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison | |
| Tracked Changes (Redline) - Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments | |
| Tracked Changes (Redline) - Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series | |
| Tracked Changes (Redline) - Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method | |
| Tracked Changes (Redline) - Fans - System effects and system effect factors | |
| Tracked Changes (Redline) - Gas cylinders \x97 Guidance for design of composite cylinders \x97 Part 4: Cyclic fatigue of fibres and liners | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters | |
| Tracked Changes (Redline) - Intelligent transport systems - Spatiotemporal data dictionary for cooperative ITS and automated driving systems 2.0 | |
| Tracked Changes (Redline) - Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL... | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO... | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure-differentia l devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of... | |
| Tracked Changes (Redline) - Nanotechnologies \x97 Health and safety practices in occupational settings | |
| Tracked Changes (Redline) - Ophthalmic implants - Intraocular lenses - Guidance on assessment of the need for clinical investigation of intraocular lens design modifications | |
| Tracked Changes (Redline) - Optics and photonics - Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation techniques | |
| Tracked Changes (Redline) - Overview of methods available for particle-free erosion corrosion testing in flowing liquids | |
| Tracked Changes (Redline) - Photography - Electronic still picture imaging terminology - Part 2: Other defined terms | |
| Tracked Changes (Redline) - Road vehicles \x97 Extended vehicle (ExVe) web services \x97 Part 4: Control | |
| Tracked Changes (Redline) - Road vehicles \x97 Human performance and state in the context of automated driving Part 1: Common underlying concepts | |
| Tracked Changes (Redline) - Series 1 freight containers - Handling and securing - Rationale for ISO 3874:2017, Annexes A to E | |
| Tracked Changes (Redline) - Space systems - Avoiding collisions among orbiting objects | |
| Tracked Changes (Redline) - Surface chemical analysis - Depth profiling - Measurement of sputtered depth | |
| Traditional Chinese medicine - Controlled vocabulary on Japanese Kampo crude drugs | |
| Traditional Chinese medicine \x97 Computerized tongue image analysis system Part 5: Method of acquisition and expression of tongue colour and tongue coating colour | |
| Traditional Chinese medicine \x97 Controlled vocabulary on Japanese Kampo formulas and the indication codes for the products | |
| Traditional Chinese medicine \x97 Infection control for acupuncture treatment | |
| Unwanted reflections from the active and inactive areas of display surfaces visible during use | |
| Welding \x97 Best practices for specification and measurement of ferrite in stainless steel weld metal | |
| Welding and allied processes \x97 Guidelines for measurement of welding energies | |
| Welding consumables \x97 International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications | |
| Wheelchair seating Part 9: Clinical interface pressure mapping guidelines for seating | |
| Wheelchairs Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5 | |
| White tea \x97 Definition | |
| Workplace air - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air | |
| Workplace atmospheres - Measurement of dermal exposure - Principles and methods |
| << Prev | Next >> |