Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1490
1500
1510
1520
1530
1540
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1560
1570
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Agricultural and forestry machinery - Solid fertilizer distributors - Safety | |
| Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods | |
| Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions | |
| Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications | |
| Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components. | |
| Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence | |
| Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence | |
| Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence | |
| Baths for domestic purposes | |
| BDS: FIXED POWER RESISTORS. CAPABILITY APPROVAL. (Endorsed by AENOR in December of 1996.) | |
| Bidets - Functional requirements and test methods | |
| Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF NEEDLE PENETRATION. | |
| Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors (Endorsed by AENOR in November of 2002.) | |
| Blank Detail Specification: Fixed low power non-wire wound resistors (Assessment level S). (Endorsed by AENOR in June of 2001.) | |
| Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods | |
| Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing | |
| Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods | |
| Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification | |
| Blinds and shutters - Thermal and visual comfort - Test and calculation methods | |
| Brazing - Guidance on the application of brazed joints | |
| Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid | |
| Cathodic protection of complex structures | |
| Ceiling mounted radiant panels supplied with water at temperature below 120 \xb0C - Part 1: Technical specifications and requirements | |
| Ceiling mounted radiant panels supplied with water at temperature below 120 \xb0C - Part 2: Test method for thermal output | |
| Cement - Composition, specifications and conformity criteria for very low heat special cements | |
| Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified) | |
| Characterization of waste - Calculation of dry matter by determination of dry residue or water content | |
| Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) | |
| Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1, step 1) | |
| Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase... | |
| Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity in the medical area - Test method and requirements (Phase 2/Step 1) | |
| Chemicals used for treatment of water intended for human consumption - Ammonium chloride | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. ANIONIC AND NON-IONIC POLYACRYLAMIDES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CATIONIC POLYACRYLAMIDES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. MODIFIED STARCHES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLY (DIALLYDIMETHYLAMMON IUM CHLORIDE). | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLYAMINES. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM ALGINATE. | |
| Child care articles - Drinking equipment - Safety requirements and test methods | |
| Child use and care articles. Soothers for babies and young children. Part 1: General safety requirements and product information. | |
| Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing | |
| Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners (Endorsed by AENOR in August of 2006.) | |
| Chimneys - System chimneys with plastic flue liners - Requirements and test methods (Endorsed by AENOR in August of 2006.) | |
| Chimneys - System chimneys with plastic flue liners - Requirements and test methods | |
| Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses | |
| Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar | |
| Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties | |
| Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids | |
| Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation | |
| Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure | |
| Cold applied joint sealants - Test methods - Part 2: Determination of tack free time | |
| Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals | |
| Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment | |
| Copper and copper alloys - European numbering system | |
| Coverings - Determination of fire protection ability | |
| Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets | |
| Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations | |
| Cranes - Manually controlled load manipulating devices | |
| Cranes - Power driven winches and hoists - Part 1: Power driven winches | |
| Cranes - Power driven winches and hoists - Part 2: Power driven hoists | |
| Cranes - Safety - Tower cranes | |
| Curtain Walling - Impact resistance - Performance requirements | |
| Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 - Revised resistance changes for substrate bending test... | |
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in August of 2003.) | |
| Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2 (Endorsed by AENOR in November of 2002.) | |
| Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2 - New style of RR 5025M (Endorsed by AENOR in August of... | |
| Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method (Endorsed by AENOR in August of 2006.) | |
| Devices to prevent by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 8. Family D, type A. | |
| Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A | |
| Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C. | |
| Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, type B | |
| Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C | |
| Devices to prevent pollution by blackflow of potable water. Pressurised air inlet valves DN 15 to DN 50 . Family L, type A and type B | |
| Dimensions of bed blankets | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems | |
| Diving suits - Part 1: Wet suits - Requirements and test methods | |
| Diving suits - Part 2: Dry suits - Requirements and test methods | |
| Diving suits - Part 3: Actively heated or cooled suits (systems) - Requirements and test methods | |
| Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods | |
| Dock levellers - Safety requirements | |
| Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity. | |
| Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity | |
| Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement | |
| Durability of wood and wood-based products - Performance criteria for curative wood preservatives as determined by biological tests | |
| Execution of special geotechnical works - Micropiles | |
| Execution of special geotechnical works - Reinforced fill (Endorsed by AENOR in August of 2006.) | |
| Execution of special geotechnical works - Soil nailing | |
| Explosion resistant equipment | |
| Explosion suppression systems | |
| Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of free and total glycerol and mono-, di, triglyceride contents. Reference method | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of free glycerol content | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of iodine value | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of methanol content | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of oxidation stability (accelerated oxidation test) | |
| Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry | |
| Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers | |
| Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials | |
| Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification | |
| Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids | |
| Fire test - Large-scale room reference test for surface products | |
| Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests | |
| Fixed ladders for manholes | |
| Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics | |
| Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption | |
| Foam producing solutions for leak detection on gas installations | |
| Foodstuffs - Determination of domoic acid in mussels by HPLC | |
| Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection | |
| Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation | |
| Foodstuffs - Determination of vitamin C by HPLC | |
| Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of... | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity | |
| Free hanging heating and cooling surfaces for water with a temperature below 120\xb0C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output | |
| Gas-fired insets for heating more than one room | |
| Gas-loaded accumulators for fluid power applications | |
| General requirements for components specifically designed for use in trenchless construction of drains and sewers. | |
| Geosynthetic barriers - Determination of permeability to liquids | |
| Geosynthetic barriers - Test method for determining the resistance to leaching | |
| Geosynthetics - Determination of burst strength | |
| Geosynthetics - Screening test method for determining chemical resistance for landfill applications | |
| Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) | |
| Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids. (ISO/TR 12960:1998, modified) | |
| Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass | |
| Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description | |
| Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods | |
| Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance | |
| HEAT EXCHANGERS. HYDRONIC ROOM FAN COIL UNITS. TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE | |
| Heat meters - Part 1: General requirements | |
| Heat meters - Part 2: Constructional requirements | |
| Heat meters - Part 3: Data exchange and interfaces | |
| Heat meters - Part 4: Pattern approval tests | |
| Heat meters - Part 5: Initial verification tests | |
| Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance | |
| Heating systems in buildings - Installation and commissioning of water based heating systems | |
| Heating Systems in buildings. Design and installations of direct electrical room heating systems. | |
| Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) | |
| Hexagon bolts with flange with metric fine pitch thread. Small series (ISO 15072:1999 modified) | |
| Hexagon nuts with flange. Fine pitch thread. (ISO 10663:1999 modified) | |
| High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods (Endorsed by AENOR in August of 2006.) | |
| High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods (Endorsed by AENOR in September of 2006.) | |
| High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload | |
| High-strength structural bolting assemblies for preloading - Part 1: General requirements (Endorsed by AENOR in August of 2006.) | |
| High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading | |
| High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 5: Plain washers | |
| High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (Endorsed by AENOR in August of 2006.) | |
| High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies | |
| High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | |
| Holders for lifebuoys. | |
| Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing | |
| Hose fittings with clamp units - Part 2: Hose side parts of hose tail | |
| Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned | |
| Hose fittings with clamp units - Part 4: Flange connections | |
| Hose fittings with clamp units - Part 5: Threaded connections | |
| Hose fittings with clamp units - Part 6: TW tank truck couplings | |
| Hose fittings with clamp units - Part 7: Cam locking couplings | |
| Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) | |
| Hose fittings with screwed ferrules | |
| Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement | |
| Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime | |
| Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag | |
| Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder | |
| Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash | |
| Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils | |
| Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems. | |
| In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans | |
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method | |
| Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems | |
| Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method | |
| Inland navigation vessels - Floating landing stages - Requirements, tests | |
| Inland navigation vessels - Gangways for passenger vessels - Requirements, tests | |
| Inland navigation vessels - Installation of berths and loading areas | |
| Inland navigation vessels. Harbours for inland navigation. | |
| Inland navigation vessels. Studless anchor chain. Round steel link chain. | |
| Inlet valves for flushing cisterns with internal overflow | |
| Inspection and testing of LPG road tankers | |
| Joint fillers and sealants - Part 3: Specifications for preformed joint seals (Endorsed by AENOR in August of 2006.) | |
| Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations | |
| Laboratory measurement of noise from waste water installations | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications (Endorsed by AENOR in September of 2006.) | |
| Laminated Veneer Lumber (LVL) - Definitions, classification and specifications | |
| Lifebuoys. Requirements, tests. | |
| Liming materials - Description and minimum requirements | |
| Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method | |
| Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods | |
| LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment | |
| LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling | |
| LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction | |
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace (Endorsed by AENOR in August of 2006.) | |
| Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace (Endorsed by AENOR in August of... | |
| Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance (Endorsed by AENOR in September of 2008.) | |
| Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods | |
| Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods | |
| Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment | |
| Natural stone test methods - Determination of Knoop hardness | |
| Natural stone test methods - Determination of the abrasion resistance | |
| Non controllable backflow preventer with different pressure zones - Family C, type A. | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method with solid phase extraction clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up | |
| Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partit ion clean up | |
| Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| Non-destructive testing - Ultrasonic thickness measurement | |
| Non-destructive testing- Qualification of radiographic film digitisation systems- Part 2: Minimum requirements. | |
| Non-destructive testing- Qualification of radiographic film digitisation systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control. | |
| Oil and fat derivatives. Fatty Acid Methyl Esters (FAME). Determination of acid value. | |
| Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 1: Test methods (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 2: Requirements for wearable knee protectors (type 1) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July... | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 3: Requirements for the individual combination of knee pads and garments (type 2) (Endorsed by Asociaci\xf3n... | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) (Endorsed by Asociaci\xf3n... | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 5: Requirements for knee mats (type 3) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of... | |
| Personal protective equipment - Knee protectors for work in the kneeling position - Part 6: Requirements for kneeling systems (type 4) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of... | |
| Personal protective equipment - Knee protectors for work in the kneeling position | |
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified) (Endorsed by AENOR in March of 2004.) | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments | |
| Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials | |
| Pillar fire hydrants | |
| Plastics and rubber machines - Two roll mills - Safety requirements | |
| Plastics and rubber machines - Two-roll mills - Safety requirements | |
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method | |
| PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS - TEST METHODS TO PROVE THE DESIGN OF BOLTED FLANGE JOINTS | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure | |
| Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE. UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM. | |
| PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Part 1: Specifications for pipes, fittings and the system. | |
| Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the... | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF BOLTED FLANGE JOINTS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF CEMENTED SOCKET-AND-SPIGOT JOINTS. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF RIGID LOCKED SOCKET-AND-SPIGOT JOINTS WITH ELASTOMERIC SEALS. | |
| Plywood - Calculation method for some mechanical properties | |
| Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system | |
| Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods | |
| Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions | |
| Preformed plasterboard cornices - Definitions, requirements and test methods | |
| Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| Pressure relief valves for LPG tanks. Ancillary Equipment. | |
| Pressure relief valves for LPG tanks. | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles | |
| Products used for treatment of water intended for human consumption - Bone charcoal | |
| Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina | |
| Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone | |
| Protective clothing - Garments for protection against cool environments | |
| Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods | |
| Protective clothing - Performance requirements and tests methods for protective clothing against infective agents | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2024.) | |
| Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages | |
| Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets | |
| Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track | |
| Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels | |
| Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment | |
| Railway applications - Braking - Requirements for the brake system of trains hauled by a locomotive | |
| Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives | |
| Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles | |
| Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles | |
| Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms | |
| Railway applications - Suspension components - Parabolic springs, steel | |
| Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for working | |
| Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | |
| Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance | |
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels | |
| Railway applications. Braking. Generic vocabulary | |
| Recreational diving services - Requirements for recreational scuba diving service providers | |
| Rescue systems - Transportation of incubators - Part 1: Interface conditions | |
| Rescue systems - Transportation of incubators - Part 2: System requirements | |
| Resilient floor coverings - Specification for floor panels for loose laying | |
| Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer | |
| RESILIENT FLOOR COVERINGS. DETERMINATION OF RESISTANCE TO STUBBED AND BURNING CIGARETTES. | |
| Resilient, textile and laminate floor coverings - Essential characteristics | |
| Respiratory equipment - Self-contained re-breathing diving apparatus | |
| Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector | |
| RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS | |
| Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen | |
| Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (Endorsed by AENOR in September of 2008.) | |
| Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking | |
| Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking | |
| Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking. | |
| Respiratory protective devices - Particle filters - Requirements, testing, marking | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking | |
| Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only | |
| RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. THREAD CONNECTION FOR INSERT CONNECTOR. | |
| RESPIRATORY PROTECTIVE DEVICES. HALF MASKS AND QUARTER MASKS. REQUIREMNTS, TESTING, MARKING. | |
| RESPIRATORY PROTECTIVE DEVICES. PARTICLE FILTERS. REQUIREMENTS, TESTING, MARKING. | |
| RESPIRATORY PROTECTIVE DEVICES. SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE. REQUIREMENTS, TESTING, MARKING. | |
| Road marking materials - Road marking performance for road users | |
| ROAD MARKING MATERIALS. ROAD MARKING PERFORMANCE FOR ROAD USERS. | |
| Road traffic noise reducing devices - Procedures for assessing long term performance | |
| Road traffic noise reducing devices - Specifications | |
| Rotary positive displacement pumps - Performance tests for acceptance (Endorsed by AENOR in August of 2006.) | |
| Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar. | |
| Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar | |
| Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages | |
| Sanitary appliances - Communal washing troughs | |
| Sawn timber - Assessment of drying quality | |
| Sectional Specification: Fixed low power non-wire wound resistors (Endorsed by AENOR in December of 2001.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER NON-WIRE WOUND RESISTORS (Endorsed by AENOR in July of 1998.) | |
| Sectional Specification: Fixed low power surface mounting (SMD) resistors (Endorsed by AENOR in December of 2001.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: FIXED LOW POWER SURFACE MOUNTING (SMD) RESISTORS. (Endorsed by AENOR in June of 1999.) | |
| Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets | |
| Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets (Endorsed by AENOR in August of 2006.) | |
| Shower enclosures - Functional requirements and test methods | |
| Solid softwood panelling and cladding - Machined profiles with tongue and groove (Endorsed by AENOR in August of 2006.) | |
| Sprayed concrete - Part 1: Definitions, specifications and conformity (Endorsed by AENOR in August of 2006.) | |
| Sprayed concrete - Part 2: Execution | |
| Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods | |
| Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing | |
| Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives | |
| Structural timber - Wood poles for overhead lines | |
| SYMBOLS FOR TIMBER AND WOOD-BASED PRODUCTS | |
| Table tennis - Part 2: Posts for net assemblies - Requirements and test methods | |
| Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves | |
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves | |
| Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels | |
| Tanks for transport of dangerous goods - Digital interface for the product recognition device. | |
| Tanks for transport of dangerous goods - Digital interface for the product recognition device | |
| Testing of textiles - Evaluation of the action of microfungi | |
| Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete | |
| Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens (Endorsed by AENOR in October of 2006.) | |
| Testing sprayed concrete - Part 4: Bond strength of cores by direct tension | |
| Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens (Endorsed by AENOR in October of 2006.) | |
| Testing sprayed concrete - Part 6: Thickness of concrete on a substrate | |
| Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete (Endorsed by AENOR in October of 2006.) | |
| Testing sprayed concrete - Sampling fresh and hardened concrete | |
| Textile floor coverings - Classification of machine-made pile rugs and runners | |
| Textile floor coverings - Minimum requirements for carpet underlays | |
| Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat | |
| Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition. | |
| Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device | |
| Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device | |
| Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device | |
| Textiles - Laundry processed textiles - Biocontamination control system. | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the... | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene | |
| Textiles and textile products - Burning behaviour of bedding items - Classification scheme | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray... | |
| Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products... | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation | |
| Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products | |
| Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products | |
| Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation | |
| Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | |
| Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products | |
| Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation | |
| Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications | |
| Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications | |
| Timber stairs - Terminology (Endorsed by AENOR in September of 2006.) | |
| Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample | |
| Timber structures - Glued laminated timber and glued solid timber - Requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing (Endorsed by AENOR in January of 2006.) | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control (Endorsed by AENOR in January of 2006.) | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in April of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems (Endorsed by AENOR in November of... | |
| Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems (Endorsed by AENOR in January of 2006.)... | |
| Timber structures - Structural laminated veneer lumber - Requirements | |
| Touch and close fasteners - Behaviour of slit selvedges | |
| TOUCH AND CLOSE FASTENERS. CYCLING PROCEDURE FOR SUBSEQUENT TESTING. | |
| TOUCH AND CLOSE FASTENERS. DETERMINATION OF CURVATURE. | |
| Transportable refillable composite cylinders for LPG - Design and construction (Endorsed by AENOR in August of 2006.) | |
| Transportable refillable fully wrapped composite cylinders for Liquified Petroleum Gases (LPG). Design and construction | |
| TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG). PERIODIC REQUALIFICATION. | |
| Ultrasonic domestic gas meters | |
| Underground fire hydrants | |
| Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures | |
| Valves for natural gas transportation in pipelines - Performance requirements and tests | |
| Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes | |
| Ventilation for buildings - Chilled ceilings - Testing and rating | |
| Ventilation for buildings - Ductwork - Measurement of ductwork surface area | |
| Ventilation for buildings. Chilled beams. Testing and rating of passive chilled beams. | |
| Ventilation for buildings. Performance testing and installation checks of residential ventilation systems | |
| Water conditioning equipment inside buildings. Electrolytic treatment systems with aluminium anodes. Requirements for performance and safety, and testing | |
| Water meters - Part 1: General requirements | |
| Water meters - Part 2: Installation and conditions of use | |
| Water meters - Part 3: Test methods and equipment | |
| Water meters - Part 4: Additional functionalities | |
| Water quality - Detection of human enteroviruses by monolayer plaque assay | |
| Water quality - Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes | |
| Water quality - Guidance for the surveying of aquatic macrophytes in running waters | |
| WC and urinal flushing cisterns | |
| Welding consumables. Test methods and quality requirements. Part 1: Primary methods and conformity assesment of consumables for steel, nickel and nickel alloys | |
| Welding consumables. Test methods and quality requirements. Part 2: Supplementary methods and conformity assesment of consumables for steel, nickel and nickel alloys | |
| Welding consumables. Test methods and quality requirements. Part 3: Conformity assesment of wire electrodes, wires and rods for welding of aluminium alloys | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | |
| Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets | |
| Wood flooring - Solid softwood floor boards | |
| Wood flooring and parquet - Characteristics, evaluation of conformity and marking | |
| Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification | |
| Wood-based panels - Melamine faced boards for interior uses - Test methods | |
| Wood-based panels - Wood veneer floor covering | |
| Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents | |
| Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods |
| << Prev | Next >> |