Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1300
1320
1330
1340
1350
1360
1370
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1390
1400
1410
1420
1430
1440
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| 3D display devices Part 41-1: Holographic display - General information | |
| 3D display devices Part 51-1: Generic introduction of aerial display | |
| A meta-modelling analysis approach to smart manufacturing reference models | |
| Active fibres - Characteristics and measurement methods - Guidance | |
| Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment | |
| Adjusted volume calculation for refrigerating appliances | |
| An electrochemical reference system for use in different solvent media - The decamethylated ferricinium/ferrocen e redox couple | |
| Application guide for non-linear coefficient measuring methods | |
| Application of fixed capacitors in electronic equipment Part 1: Aluminium electrolytic capacitors | |
| Application of IEC 60335-2-27 for field inspections of UV emission of UV appliances | |
| Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires | |
| Application of risk management for IT-networks incorporating medical devices - Part 2-4: General implementation guidance for Healthcare Delivery Organizations | |
| Application of risk management for IT-networks incorporating medical devices Part 2-1: Step-by-step risk management of medical IT-networks - Practical applications and examples | |
| Application of risk management for IT-networks incorporating medical devices Part 2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls | |
| Application of risk management for IT-networks incorporating medical devices Part 2-3: Guidance for wireless networks | |
| Application of risk management for IT-networks incorporating medical devices Part 2-5: Application guidance \x97 Guidance on distributed alarm systems | |
| Application of risk management for IT-networks incorporating medical devices Part 2-8: Application guidance \x97 Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 | |
| Application of risk management for it-networks incorporating medical devices Part 2-9: Application guidance - Guidance for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security capabilities... | |
| Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems | |
| Aspects and understanding of measurement uncertainty \x97 Background information on measurement uncertainty based on the example of IEC TC 85 (Measuring equipment for electrical and electromagnetic quantities) | |
| Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields Part 1: Results of the EMF measurement campaign from the VDE Test and Certification Institute and ZVEI, the German... | |
| Assignment of safety integrity requirements - Basic rationale | |
| Audio/video, information and communication technology equipment Part 2: Explanatory information related to IEC 62368-1:2018 | |
| Audio/video, information and communication technology equipment Part 2: Explanatory information related to IEC 62368-1 | |
| Automatic speech recognition: Classification according to acoustic and linguistic indicators in real-life applications | |
| Bushings \x97 Seismic qualification | |
| Case studies supporting IEC 62232 - Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Case studies supporting IEC 62232 \x97 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Chemometrics for process analytical technologies Part 1: General provisions, and methods for univariate statistics and chemometric processing of data | |
| Classification of environmental conditions Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3-3 to the environmental tests of IEC 60068 - Stationary use at... | |
| Code of practice for hearing-loop systems (HLS) | |
| Common automation device Profile guideline | |
| Communication networks and systems for power utility automation Part 1-2: Guidelines on extending IEC 61850 | |
| Communication networks and systems for power utility automation Part 2: Glossary | |
| Communication networks and systems for power utility automation Part 6-3: Format of machine-processable rules for validation of IEC 61850 XML-based files | |
| Communication networks and systems for power utility automation Part 7-7: Machine-processable format of IEC 61850-related data models for tools | |
| Communication networks and systems for power utility automation Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 | |
| Communication networks and systems for power utility automation Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model | |
| Conceptual framework of power system resilience | |
| Conceptual model for TC 100 standardization on multimedia cyber technology | |
| Conceptual model of standardization for haptic multimedia systems | |
| Configurable car infotainment services (CCIS) Part 4: Protocol | |
| Connectivity for lighting systems | |
| Consideration of energy efficiency in wireless power transfer technology | |
| Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements | |
| Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing | |
| Current and voltage sensors or detectors, to be used for fault passage indication purposes Part 100: Requirements and proposals for the IEC 61850 series data model extensions to support fault... | |
| Damp heat, steady state (unsaturated pressurized vapour with air) | |
| Decentralized electrical energy systems roadmap | |
| Demand side power quality management | |
| Determination of long-term radiation ageing in polymers Part 1: Techniques for monitoring diffusion-limited oxidation | |
| Determination of long-term radiation ageing in polymers Part 2: Procedures for predicting ageing at low dose rates | |
| Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components - Measurement, modelling and calculation methods | |
| Device embedded substrate Part 2-2: Guidelines \x97 Electrical testing | |
| Device embedding assembly technology Part 2-7: Guidelines - Accelerated stress testing of passive embedded circuit boards | |
| Device embedding assembly technology Part 2-8: Guidelines \x97 Warpage control of active device embedded substrate | |
| Device embedding assembly technology Part 2-9: Guidelines - Concept of JISSO level in the electronic assembly technology industries | |
| Digital sheet music \x97 Market, use cases, and related technologies | |
| Dimensional tolerances of ferrite cores | |
| Dimming and hot restrike of metal halide lamps | |
| Display lighting unit Part 1-3: Lighting units with arbitrary shapes | |
| Display lighting unit Part 1-4: Glass light guide plate | |
| Display lighting unit Part 1-5: Electrical signal interface of LED BLU | |
| Display lighting unit Part 1-6: Quantum dot films and quantum dot diffuser plates used in backlight unit | |
| Display technologies - LCD, PDP, and OLED - Overview and explanation of differences in terminology | |
| Distributed energy resources connection with the grid Part 102: CAES connection to the grid | |
| Documentation on design automation subjects \x97 Mathematical algorithm hardware description languages for system level modeling and verification (HDLMath) | |
| Durability test methods for electronic displays Part 2-12: Environmental tests \x97 Environmental conditions of use, storage and transportation of electronic displays | |
| Dynamic characteristics of inverter-based resources in bulk power systems Part 2: Sub- and super-synchronous control Interactions | |
| Dynamic characteristics of inverter-based resources in bulk power systems Part 3: Fast frequency response and frequency ride-through from inverter-based resources during severe frequency disturbances | |
| Dynamic characteristics of inverter-based resources in bulk power systems Part 4: Behaviour of inverter-based resources in response to bulk grid faults | |
| Dynamic metadata high dynamic range impacts on TV power consumption | |
| Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results | |
| Dynamic modules Part 6-10: Design guide \x97 Intermediate controller for multiple dynamic module systems | |
| Dynamic Modules Part 6-11: Design guidelines \x96 Software and hardware interface for optical multicast switches | |
| Dynamic modules Part 6-12: Design guidelines \x97 Survey results on performance specifications for 1 \xd7 N wavelength selective switches | |
| Dynamic modules Part 6-1: Dynamic channel equalizers | |
| Dynamic modules Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators | |
| Dynamic modules Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer | |
| Dynamic modules Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules | |
| Dynamic modules Part 6-6: Failure mode effect analysis for optical units of dynamic modules | |
| Dynamic modules Part 6-7: Design guide - Optical channel monitor | |
| Dynamic modules Part 6-8: Categorization study of dynamic performance requirements | |
| Dynamic modules Part 6-9: Design guide \x97 Study of mechanisms and measurements of crosstalk in wavelength-selective switches | |
| Effective area measurements of single-mode optical fibres - Guidance | |
| Effects of current on human beings and livestock - Part 1: General aspects | |
| Effects of current on human beings and livestock Part 2: Special aspects | |
| Electric components - Reliability - Failure rates at reference conditions | |
| Electric vehicles conductive charging system Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication | |
| Electric vehicles conductive charging system Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects | |
| Electric vehicles conductive charging system Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication | |
| Electric vehicles conductive charging system Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication | |
| Electrical energy storage (EES) systems Part 2-200: Unit parameters and testing methods \x97 Case study of electrical energy storage (EES) systems located in EV charging station with PV | |
| Electrical energy storage (EES) systems Part 3-200: Planning and performance assessment of electrical energy storage systems - Design principles of electrochemical based EES systems | |
| Electrical Energy Storage (EES) Systems Part 4-200: Guidance on environmental issues - Greenhouse gas (GHG) emission assessment by electrical energy storage (EES) systems | |
| Electrical enery storage (EES) systems Part 2-201: Unit parameters and testing methods - Review of testing for battery energy storage systems (BESS) for the purpose of implementing repurpose and reuse... | |
| Electrical installation guide Part 102: Application guidelines for low-voltage direct current electrical installations not intended to be connected to a public distribution network | |
| Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses | |
| Electrical insulation materials \x97 Thermal endurance properties Part 7\x961: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) \x97 Instructions for calculations based on activation energy | |
| Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems | |
| Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems | |
| Electrical steel - Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens | |
| Electrical steel \x97 Reverse bend test method for electrical steel strip and sheet | |
| Electroacoustics \x97 Simulators of human head and ear Part 7: Head and torso simulator for the measurement of air-conduction hearing aids | |
| Electrochemical migration in printed wiring boards and assemblies \x97 Mechanisms and testing | |
| Electromagnetic compatibility (EMC) Part 3-16: Limits \x97 Limits for harmonic currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to 75... | |
| Electromagnetic compatibility (EMC) Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI | |
| Electromagnetic performance of high voltage direct current (HVDC) overhead transmission lines | |
| Electronic display devices Part 2-3: Measurements of optical properties \x97 Multi-colour test patterns | |
| Electronic display devices Part 2-5: Transparent displays - Measurements of optical characteristics | |
| Electronic display devices Part 3-2: Evaluation of optical characteristics \x97 Mura | |
| Electronic displays for special applications Part 1: General introduction | |
| Electronic displays for special applications Part 2: Elevator and escalator | |
| Electronic displays for special applications Part 3: Gaming and e-sports | |
| Electronic displays Part 1-31: Generic \x97 Practical information on the use of light measuring devices | |
| Electronic displays Part 2-4: Transparent displays - Overview of application scenarios | |
| Electronic displays Part 5-2: Visual assessment \x97 Colour discrimination according to viewing direction | |
| Electronic paper displays Part 5-1: Legibility of EPD in spatial frequency | |
| Electronic railway equipment \x97 Train communication network (TCN) Part 2-4: TCN application profile | |
| Electrostatics Part 4-2: Standard test methods for specific applications \x97 Electrostatic properties of garments | |
| Electrostatics Part 5-4: Protection of electronic devices from electrostatic phenomena - Compliance verification | |
| Electrostatics Part 5-6 : Protection of electronic devices from electrostatic phenomena - Process assessment techniques | |
| Electrostatics Part 6-2: Electrostatic control in healthcare, commercial and public facilities - Public spaces and office areas | |
| EMC IC modelling Part 2-1: Theory of black box modelling for conducted emission | |
| EMC IC modelling Part 4-1: Use of ICIM-CI model to predict the IC conducted immunity in a PCB | |
| Energy efficiency through automation systems | |
| Environmental declaration Part 1: Communication wires and cables \x97 Product specific rules | |
| Environmental declaration Part 1: Wires, cables and accessory products - Specific rules | |
| Environmental declaration Part 2: Optical/copper telecom accessories products specific rules | |
| Equipment for general lighting purposes - Objective test method for stroboscopic effects of lighting equipment | |
| Equipment for general lighting purposes \x97 Objective test method for stroboscopic effects of lighting equipment | |
| Estimation of the reliability of electrical connectors | |
| Explanation of the mathematical addition of working voltages, insulation between circuits, and use of PELV, in TC 34 standards | |
| Explosive atmospheres Part 32-1: Electrostatic hazards, guidance | |
| Explosive atmospheres Part 39: Intrinsically safe systems with electronically controlled spark duration limitation | |
| Explosive atmospheres Part 40: Requirements for process sealing between flammable process fluids and electrical systems | |
| Explosive atmospheres Part 42: Electrical Safety Devices for the control of potential ignition sources from Ex-Equipment | |
| Explosive atmospheres Part 43: Equipment in adverse service conditions | |
| Explosive atmospheres Part 46: Equipment assemblies | |
| Explosive atmospheres Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE) | |
| Explosive atmospheres Part 48: Portable or Personal Electronic Equipment - Guide for the use of equipment without a certificate for use in Hazardous Areas | |
| Exposure assessment methods for wireless power transfer systems | |
| Eyewear display Part 1-1: Generic introduction | |
| Fibre optic active components and devices - Reliability standards - Part 2: Laser module degradation | |
| Fibre optic active components and devices - Reliability standards Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers | |
| Fibre optic active components and devices \x97 Reliability standards Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers | |
| Fibre optic interconnecting devices and passive components - Study of an SC connector adaptor with safety lock mechanism | |
| Fibre optic interconnecting devices and passive components \x97 Summarising results of round robin on connector end face scratch recognition and verification by automated microscopes | |
| Fibre optic interconnecting devices and passive components Part 01: Fibre optic connector cleaning methods | |
| Fibre optic interconnecting devices and passive components Part 02: Report of round robin test results on SC plug style fixed attenuators | |
| Fibre optic interconnecting devices and passive components Part 03-01: Reliability - Design of an acceptance test for fibre pistoning failure of connectors during temperature and humidity cycling: demarcation analysis | |
| Fibre optic interconnecting devices and passive components Part 03-02: Reliability - Report of high power transmission test of specified passive optical components | |
| Fibre optic interconnecting devices and passive components Part 03-03: Reliability \x97 Report on high-power reliability for metal-doped optical fibre plug-style optical attenuators | |
| Fibre optic interconnecting devices and passive components Part 03-04: Reliability \x97 Guideline for high power reliability of passive optical components | |
| Fibre optic interconnecting devices and passive components Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector | |
| Fibre optic interconnecting devices and passive components Part 05: Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors | |
| Fibre optic interconnecting devices and passive components Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter | |
| Fibre optics. Multimode launch conditions. Determination of launch condition requirements for measuring multimode attenuation | |
| Field device tool (FDT) interface specification Part 42: Object model integration profile \x97 Common Language Infrastructure | |
| Field device tool (FDT) interface specification Part 51-31: Communication implementation for common object model \x97 IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 51-90: Communication implementation for common object model \x97 IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification Part 62: Field device tool (FDT) styleguide for common language infrastructure | |
| Fire hazard testing Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products | |
| Fire hazard testing Part 11-40: Test flames \x97 Confirmatory tests \x97 Guidance | |
| Fire hazard testing Part 2-20: Glowing/hot wire based test methods - Hot-wire ignition (HWI) test method - Apparatus, verification, test method and guidance | |
| Fire hazard testing Part 2-21: Glowing/hot-wire based test methods - Fire containment test on finished units | |
| Fire hazard testing Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods | |
| Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls | |
| Flexible display devices Part 6-21: Mechanical test methods - Foldable durability test for foldable display set | |
| Flexible displays Part 5-61: Overview of measurement and application scenarios of stretchable displays | |
| Flexible printed circuit boards (FPCBs) \x97 Method of compensation of impedance variations | |
| Flexible printed circuit boards (FPCBs) \x97 Method to decrease signal loss by using noise suppression materials | |
| Form factor of smart mobile device Part 2: Use cases of multimedia services | |
| Form factor of smart mobile devices Part 1: Impact on multimedia services | |
| Framework for energy market communications - Part 501: General guidelines for use of ebXML | |
| Framework for energy market communications Part 101: General guidelines | |
| Framework for energy market communications Part 102: Energy market model example | |
| Framework for energy market communications Part 103: Review of information exchanges within the deregulated European style retail energy market from a CIM perspective | |
| Fuel cell technologies Part 7-3: Test methods \x97 Status of accelerated tests for fuel cell stacks and components and perspectives for standardization | |
| Functional safety of electrical/electroni c/ programmable electronic safety-related systems Part 3-2: Requirements and guidance in the use of mathematical and logical techniques for establishing exact properties of software and its... | |
| Functional safety of electrical/electroni c/programmable electronic safety-related systems Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety function | |
| General testing procedures for medical electrical equipment | |
| Graphical symbols for diagrams Part 1: General, qualifying and generic symbols | |
| Graphical symbols for use on equipment - Graphical symbols for multimedia equipment - Current practice | |
| Grid connection of offshore wind via VSC-HVDC systems | |
| Guidance for evaluating exposure from multiple electromagnetic sources | |
| Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products | |
| Guidance for polarization crosstalk measurement of optical fibre | |
| Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials | |
| Guidance for residual stress measurement of optical fibre | |
| Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use | |
| Guidance for the interpretation of OTDR backscattering traces for single-mode fibres | |
| Guidance for the interpretation of OTDR backscattering traces | |
| Guidance for the selection of drop cables | |
| Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters | |
| Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm \x97 Test results of research on influencing parameters | |
| Guidance on colour coding of optical fibre cables | |
| Guidance on error and warning messages for software used in radiotherapy | |
| Guidance on fungus resistance of optical fibre cables | |
| Guidance on material efficiency considerations in environmentally conscious design of electrical and electronic products | |
| Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems | |
| Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts | |
| Guidance on the environmentally conscious design of fibre optics related products and subsystems | |
| Guidance on the interpretation of carbon dioxide and 2-furfuraldehyde as markers of paper thermal degradation in insulating mineral oil | |
| Guideline for planning of HVDC systems Part 1: HVDC systems with line-commutated converters | |
| Guideline for safe operation of medical equipment used for haemodialysis treatments | |
| Guideline for the system design of HVDC converter stations with line-commutated converters | |
| Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station | |
| Guidelines for parameters measurement of HVDC transmission line | |
| Guidelines for the design of interconnected power systems | |
| Guidelines for the measurement of high-power damage sensitivity of singlemode fibres to bends - Guidance for the interpretation of results | |
| Harmonization of environmental performance criteria for electrical and electronic products - Feasibility study | |
| High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) | |
| High-voltage direct current (HVDC) systems - Application of active filters | |
| High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breaking test duty T100a | |
| High-voltage switchgear and controlgear Part 301: Dimensional standardisation of high-voltage terminals | |
| High-voltage switchgear and controlgear Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers | |
| High-voltage switchgear and controlgear Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV... | |
| High-voltage switchgear and controlgear Part 312: Guidance for the transferability of type tests of high-voltage/ low-voltage prefabricated substations | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 2: Environmental conditions | |
| Home laundry appliances \x97 Uncertainty reporting of measurements | |
| Household and similar electrical appliances - Method of measuring performance - Assessment of repeatability, reproducibility and uncertainty | |
| HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000 h test | |
| HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test | |
| HVDC installations - Guidelines on asset management | |
| Hydrogen effects in optical fibre cables \x97 Guidelines | |
| IEC nanoelectronics standardization roadmap | |
| Incompatibility of connectors for DC-application in photovoltaic systems | |
| Industrial communication networks - Network and system security Part 3-1: Security technologies for industrial automation and control systems | |
| Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) | |
| Industrial-process measurement, control and automation - Reference model for representation of production facilities (digital factory) | |
| Industrial-process measurement, control and automation - Smart manufacturing Part 2: Use cases | |
| Industrial-process measurement, control and automation - Smart manufacturing Part 5: Market and innovation trends analysis | |
| Industrial-process measurement, control and automation \x96 Framework for functional safety and security | |
| Industrial-process measurement, control and automation \x96 Smart manufacturing Part 1: Terms and definitions | |
| Industrial-process measurement, control and automation \x97 Smart manufacturing Part 3: Challenges for Cybersecurity | |
| Insulating liquids - Quantitative determination of methanol and ethanol in insulating liquids | |
| Integrating distributed PV into LVDC systems and use cases | |
| Intelligent device management Part 1: Concepts and terminology | |
| International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers | |
| International Lamp Coding System (ILCOS) | |
| Interoperation guide for field device tool (FDT)/device type manager (DTM) and electronic device description language (EDDL) | |
| Land usage of photovoltaic (PV) farms - Mathematical models and calculation examples | |
| Life extension guidelines for HVDC converter stations | |
| Lighting systems - Characteristics for selected outdoor applications | |
| Lightning and surge voltage protection for photovoltaic (PV) power supply systems | |
| Live working - Guidance for end users for the selection of personal protective equipment against the hazards of an electric arc | |
| Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines | |
| Low voltage switchgear and controlgear \x97 Partial discharge voltages and PD-level in low voltage switchgear and controlgear | |
| Low-voltage electrical installations Part 8-3: Functional aspects \x97 Operation of prosumer\x92s electrical installations | |
| Low-voltage switchgear and controlgear \x96 Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies | |
| Low-voltage switchgear and controlgear \x96 Fire risk analysis and risk reduction measures | |
| Low-voltage switchgear and controlgear \x96 Guidance for the development of embedded software | |
| Low-voltage switchgear and controlgear Part 7-5: Ancillary equipment - Terminal blocks for aluminium conductors | |
| Luminaires - Application of the IK code IEC 62262 | |
| LVDC systems \x97 Assessment of standard voltages and power quality requirements | |
| Magnetizing behaviour of permanent magnets | |
| Maintenance of low voltage switchgear and controlgear and their assemblies | |
| Managing fire risk related to photovoltaic (PV) systems on buildings | |
| Mapping rules and exchange methods for heterogeneous electronic parts libraries Part 1: Building an integrated search system | |
| Material declaration for products of and for the electrotechnical industry Part 1: Guidance for the implementation of IEC 62474 | |
| Measurement methods - High dynamic range video | |
| Measurement methods of the complex relative permeability and permittivity of noise suppression sheet | |
| Measurement of internal electric field in insulating materials - Pressure wave propagation method | |
| Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz | |
| Measurement protocols for photovoltaic devices based on organic, dye-sensitized or perovskite materials | |
| Measuring relays and protection equipment Part 216-1: Digital interface \x97 General requirements and tests for protection functions using digital communication as input and output | |
| Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software | |
| Medical device software Part 3: Process reference model of medical device software life cycle processes | |
| Medical devices Part 2: Guidance on the application of usability engineering to medical devices | |
| Medical Electrical Equipment - Guidelines for Implementation of DICOM in Radiotherapy | |
| Medical electrical equipment Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems | |
| Medical electrical equipment Part 4-6: Guidance and interpretation - Voluntary guidance to help achieve basic safety and essential performance with regard to the possible effects of electromagnetic disturbances | |
| Medical electrical system \x96 Guidelines for safe integration and operation of adaptive external-beam radiotherapy systems for real-time adaptive radiotherapy | |
| Methods for calculating the main static performance indicators of transducers and transmitters | |
| Microgrids Part 4: Use cases | |
| Mnemonics and designations of symbols for measuring relays, instruments and related device | |
| Models for evaluation of thermal hazard in medical diagnostic ultrasonic fields | |
| Multicore and symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables | |
| Multimedia systems and equipment - Multimedia signal transmission - Dependable line code with error correction | |
| Multimedia systems and equipment for vehicles - Compact Driving Simulator (CDS) Part 1: General | |
| Nanoscale electrical contacts and interconnects | |
| Nanotechnologies - A guideline for ellipsometry application to evaluate the thickness of nanoscale films | |
| Noise measurement method on power capacitors | |
| Non-linear coefficient measuring methods Application guide | |
| Nuclear facilities - Instrumentation, control and electrical power systems important to safety - Structure of the IEC SC 45A standards series | |
| Nuclear facilities \x97 Instrumentation and control, and electrical power systems \x97 Artificial Intelligence applications | |
| Nuclear facilities \x97 Instrumentation, control and electrical power systems \x97 Cybersecurity risk management approaches | |
| Nuclear power plants - Instrumentation and control systems important to safety - Hazard analysis: a review of current approaches | |
| Nuclear power plants \x96 Control rooms \x96 Human factors engineering | |
| Nuclear power plants \x96 Instrumentation and control important to safety \x96 Platform qualification for systems important to safety | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems \x96 Guidance for the application of IEC 63147:2017/IEEE Std 497\x99-2016 in the IAEA / IEC framework | |
| Nuclear power plants \x97 Instrumentation and control important to safety \x97 Use and selection of wireless devices to be integrated in systems important to safety | |
| Nuclear Power plants \x97 Instrumentation and control systems \x97 Use of formal security models for I&C security architecture design and assessment | |
| Nuclear power plants \x97 Instrumentation and control systems important to safety \x97 Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems | |
| Nuclear power plants \x97 Instrumentation and control systems, control rooms and electrical power systems \x97 Specific features of small modular reactors and needs regarding standards | |
| Nuclear radiation Fibre optic guidance | |
| OPC unified architecture Part 1: Overview and concepts | |
| OPC Unified Architecture Part 2: Security model | |
| Opportunity charging of lead-acid traction batteries | |
| Optical fibre cables - Guide to the installation of optical fibre cables | |
| Optical fibre cables \x97 Microduct technology \x97 Guidance | |
| Optical fibre cables \x97 Shrinkage effects on cable and cable element end termination \x97 Guidance | |
| Optical fibres - Guidance for nuclear radiation tests | |
| Packaging of components for automatic handling Part 6-1: Bulk case packaging for miniaturized surface mounting components | |
| Performance of power electronic reactive power shunt compensators in high voltage alternating current (HVAC) systems | |
| Performance of unified power flow controller (UPFC) in electric power systems | |
| Performance of voltage sourced converter (VSC) based high-voltage direct current (HVDC) transmission Part 1: Steady-state conditions | |
| Permanent magnet (magnetically hard) materials \x97 Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet | |
| Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety | |
| Photobiological safety of lamps and lamp systems Part 3: Guidelines for the safe use of intense pulsed light source equipment on humans | |
| Photobiological safety of lamps and lamp systems Part 4: Measuring methods | |
| Photonic integrated circuits Part 1: Introduction and roadmap for standardization | |
| Photovoltaic devices Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices | |
| Photovoltaic devices Part 13: Electroluminescence of photovoltaic modules | |
| Photovoltaic power systems (PVPSs) \x97 Roadmap for robust reliability | |
| Photovoltaic system performance Part 2: Capacity evaluation method | |
| Photovoltaic system performance Part 3: Energy evaluation method | |
| Power consumption of high dynamic range television sets | |
| Power measurement applications within electrical distribution networks and electrical installations | |
| Power quality management Part 100: Impact of power quality issues on electric equipment and power system | |
| Power quality management Part 101: Power quality data application | |
| Power supplying scheme for wearable systems and equipment | |
| Power systems management and associated information exchange - Data and communications security Part 10: Security architecture guidelines | |
| Power systems management and associated information exchange - Data and communications security Part 13: Guidelines on security topics to be covered in standards and specifications | |
| Power systems management and associated information exchange - Interoperability in the long term Part 103: Standard profiling | |
| Power systems management and associated information exchange \x96 Data and communications security Part 90-2: Deep packet inspection of encrypted communications | |
| Power systems management and associated information exchange \x97 Data and communications security Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems | |
| Power systems management and associated information exchange \x97 Data and communications security Part 90-1: Guidelines for handling role-based access control in power systems | |
| Power systems management and associated information exchange \x97 Data and communications security Part 90-3: Guidelines for network and system management | |
| Power systems management and associated information exchange Part 1: Reference architecture | |
| Power systems management and associated information exchange Part 200: Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) | |
| Power systems management and associated information exchange Part 2: Use cases and role models | |
| Power transformers Part 19: Rules for the determinations of uncertainties in the measurement of losses in power transformers and reactors | |
| Power transformers Part 20: Energy efficiency | |
| Power transformers Part 23: DC magnetic bias suppression devices | |
| Printed electronics Part 250: Material technologies required in printed electronics for wearable smart devices | |
| Printed electronics Part 302-5: Equipment - Inkjet - Significant characteristics of inkjet printing | |
| Printed electronics Part 303-2: Equipment \x97 Sheet to sheet printing \x97 Mechanical dimensions | |
| Printed electronics Part 402-4: Printability - Measurement of qualities - Classification and measurement methods for morphology | |
| Printed electronics Part 550-1: Quality assessment - Framework document on durability testing - Mechanical and thermal testing | |
| Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state | |
| Procedures for the assessment of human exposure to electromagnetic fields from radiative wireless power transfer systems - Measurement and computational methods (frequency range of 30 MHz to 300 GHz) | |
| Process analysis technology systems as part of safety instrumented systems | |
| Process management for avionics - Atmospheric radiation effects Part 6: Extreme space weather and potential impact on the avionics environment and electronics | |
| Process management for avionics - Atmospheric radiation effects Part 7: Management of SEE analysis process in avionics design | |
| Process management for avionics - Atmospheric radiation effects Part 8: Proton, electron, pion, muon, alpha-ray fluxes and single event effects in avionics electronic equipment - Awareness guidelines | |
| Process management for avionics - Electronics design Part 1: Electrical signal properties, naming conventions and interface control document (ICD) | |
| Process management for avionics \x97 Highly severe stress tests for operating margins identification and robustness improvement of avionics equipment \x97 Application guidelines | |
| Pulsed field magnetometry | |
| Quantification methodology for greenhouse gas emissions for computers and monitors | |
| Radio frequency beam wireless power transfer (WPT) for mobile devices | |
| Radio frequency connectors Part 1-51: Technical specification of electrical tests - Uncertainty specification of frequency domain test for return loss | |
| Radio-frequency connectors Part 1-7: Electrical test methods \x97 Uncertainty specification of frequency domain test for insertion loss | |
| Railway applications - Automated urban guided transport (AUGT) - Safety requirements Part 2: Hazard analysis at top system level | |
| Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures | |
| Reliability and availability evaluation of HVDC systems | |
| Reliability data handbook Universal model for reliability prediction of electronics components, PCBs and equipment | |
| Reliability of devices used in fibre optic systems - General and guidance | |
| Reliability of industrial automation devices and systems Part 2: System reliability | |
| Remote control and remote assistance system in home and local area | |
| Renewable energy power forecasting technology | |
| Report on the development of cogeneration | |
| Roadmap of optical circuit boards and their related packaging technologies | |
| Rotating electrical machinery \x97 Natural graphite brush for slip-ring in wound rotor-type induction motor \x97 Application information | |
| Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines | |
| Rotating electrical machines \x97 Part 32: Measurement of stator end-winding vibration at form-wound windings | |
| Rotating electrical machines Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors | |
| Rotating electrical machines Part 25: AC electrical machines used in power drive systems \x97 Application guide | |
| Rotating electrical machines Part 27-5: Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage | |
| Rotating electrical machines Part 30-2: Efficiency classes of variable speed AC motors (IE-code) | |
| Rotating electrical machines Part 34: AC adjustable speed rolling mill motors | |
| Safety of laser products Part 19: Moving platform laser products | |
| Safety of laser products Part 20: Safety requirements for products intentionally exposing face or eyes to laser radiation | |
| Safety of machinery - Electro-sensitive protective equipment Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP) | |
| Safety of machinery - Guidelines for the use of communication systems in safety-related applications | |
| Safety of machinery - Security aspects related to functional safety of safety-related control systems | |
| Safety of machinery \x97 Electro-sensitive protective equipment Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) \x97 Additional requirements when using reference pattern techniques (VBPDPP) | |
| Safety of machinery \x97 Electro-sensitive protective equipment Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) \x97 Additional requirements when using stereo vision techniques (VBPDST) | |
| Safety of machinery \x97 Electro-sensitive protective equipment Part 5: Particular requirements for radar-based protective devices | |
| Safety of machinery Part 2: Examples of application | |
| Safety procedures for reduction of risk outside a structure | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Experimental procedure for the forced internal short-circuit test of IEC 62133:2012 | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 4: Candidate alternative test methods for the internal short circuit test of IEC 62660-3 | |
| Security for industrial automation and control systems Part 2-3: Patch management in the IACS environment | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 4: Insulators for d.c. systems | |
| Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance | |
| Semiconductor devices - Estimation method for lifetime conversion from "PART" to "SYSTEM" | |
| Semiconductor devices - Scan based ageing level estimation for semiconductor devices | |
| Semiconductor devices Part 19-2: Smart sensors - Indication of specifications of sensors and power supplies to drive smart sensors for low power operation | |
| Semiconductor die products - Part 8: EXPRESS model schema for data exchange | |
| Sharp edge testing apparatus and test procedure for lighting equipment \x97 Tests for sharpness of edge | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 2: Endurance testing | |
| Shunt capacitors for AC power systems having a rated voltage above 1 000 V Part 3: Protection of shunt capacitors and shunt capacitor banks | |
| Single-mode optical fibres Raman gain efficiency measurement using continuous wave method Guidance | |
| Smart grid standardization roadmap | |
| Smart grid user interface Part 1: Interface overview and country perspectives | |
| Smart television Part 1: Conceptual model for smart television | |
| Smart television Part 2: Framework of integrated service on smart television | |
| Solar photovoltaic energy systems - Terms, definitions and symbols | |
| Standardising the characteristics of electricity | |
| Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method | |
| Study for the derating curve of surface mount fixed resistors - Derating curves based on terminal part temperature | |
| Summary of requirements and tests for products in the scope of IEC 60601-2-66 | |
| Summary of requirements and tests to products in the scope of IEC 60601-2-66 | |
| Switchgear and controlgear and their assemblies for low voltage \x97 Energy efficiency | |
| Systems interface between customer energy management system and the power management system Part 2: Use cases and requirements | |
| Telecontrol equipment and systems Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard | |
| Telecontrol equipment and systems Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard | |
| Telecontrol equipment and systems Part 5-7: Transmission protocols - Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (applying IEC 62351) | |
| Telecontrol equipment and systems Part 5-7: Transmission protocols \x96 Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (applying IEC 62351) | |
| Test method development \x97 Guidelines for substance selection | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-301: Test methods for interconnection structures (printed boards) - Appearance inspection method for plated surfaces on... | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 2: Test method for quantitative determination of total corrosive sulfur (TCS) | |
| Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Part 3: Test method for quantitative determination of elemental sulfur | |
| Thermal standardization on semiconductor packages Part 1: Thermal resistance and thermal parameter of BGA, QFP type semiconductor packages | |
| Three-digit-code for designation of colour rendering and correlated colour temperature | |
| Touch and interactive displays Part 1-3: Generic \x97 General introduction to pen touch technology | |
| Tracked Changes (Redline) - Application guidelines for nonlinear coefficient measuring methods | |
| Tracked Changes (Redline) - Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields | |
| Tracked Changes (Redline) - Audio/video, information and communication technology equipment Part 2: Explanatory information related to IEC 62368-1:2018 | |
| Tracked Changes (Redline) - Case studies supporting IEC 62232 - Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of... | |
| Tracked Changes (Redline) - Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems | |
| Tracked Changes (Redline) - Electroacoustics \x97 Simulators of human head and ear Part 7: Head and torso simulator for the measurement of airconduction hearing aids | |
| Tracked Changes (Redline) - Electromagnetic performance of high voltage direct current (HVDC) overhead transmission lines | |
| Tracked Changes (Redline) - Electrostatics \x97 Part 5-6: Protection of electronic devices from electrostatic phenomena \x97 Process assessment techniques | |
| Tracked Changes (Redline) - Environmental declaration \x97 Part 1: Communication wires and cables \x97 Product specific rules | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods | |
| Tracked Changes (Redline) - Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance | |
| Tracked Changes (Redline) - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) | |
| Tracked Changes (Redline) - Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines | |
| Tracked Changes (Redline) - LVDC systems \x97 Assessment of standard voltages and power quality requirements | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems | |
| Tracked Changes (Redline) - Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables | |
| Tracked Changes (Redline) - Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices | |
| Tracked Changes (Redline) - Photovoltaic system performance \x97 Part 2: Power performance index and capacity evaluation method | |
| Tracked Changes (Redline) - Printed electronics - Part 250: Material Technologies required in printed electronics for wearable smart devices | |
| Tracked Changes (Redline) - Process management for avionics - Highly severe stress tests for operating margins identification and robustness improvement of avionics equipment - Application guidelines | |
| Tracked Changes (Redline) - Quantification methodology for greenhouse gas emissions for computers and monitors | |
| Tracked Changes (Redline) - Reliability and availability evaluation of HVDC systems | |
| Tracked Changes (Redline) - Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide | |
| Tracked Changes (Redline) - Safety of machinery \x97 Electro-sensitive protective equipment \x97 Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) \x97 Additional requirements when using reference... | |
| Tracked Changes (Redline) - Safety of machinery \x97 Electro-sensitive protective equipment \x97 Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) \x97 Additional requirements when using stereo... | |
| Tracked Changes (Redline) - Telecontrol equipment and systems \x97 Part 5-7: Transmission protocols \x97 Security extensions to IEC 60870-5-101 and IEC 60870- 5-104 protocols (applying IEC 62351) | |
| Transmitting and receiving equipment for radiocommunication - Radio spectrum measurement method - 300-GHz spectrum measurement equipment | |
| Transmitting and receiving equipment for radiocommunication - Radio-over-fibre technologies for electromagnetic-fiel d measurement Part 3: Antenna near-field pattern measurement using optical techniques in terahertz-wave bands | |
| Transmitting and receiving equipment for radiocommunication - Short-range radar technologies and their performance standard Part 1: System applications of short-range radars | |
| Transmitting equipment for radiocommunication - Radio-over-fibre technologies for electromagnetic-fiel d measurement Part 2: Radio-over-fibre technologies for electric-field sensing | |
| Transmitting equipment for radiocommunication - Radio-over-fibre technologies for spectrum measurement - 100-GHz spectrum measurement equipment | |
| Transmitting equipment for radiocommunication \x96 Radio-over-fibre technologies for electromagnetic-fiel d measurement Part 1: Radio-over-fibre technologies for antenna measurement | |
| Transmitting equipment for radiocommunication \x97 Radio-over-fibre technologies and their performance standard Part 1: System applications of radio over fibre technology | |
| Tutorial and application guide for high-voltage fuses | |
| UHV AC transmission systems Part 100: General information | |
| UHV AC transmission systems Part 303: Guideline for the measurement of UHV AC transmission line power frequency parameters | |
| Unified fluorescent lamp dimming standard calculations | |
| Unified power flow controller (UPFC) installations \x97 System tests | |
| Use case methodology Part 1: Concept and processes in standardization | |
| Use cases related to ambient assisted living (AAL) in the field of audio, video and multimedia systems and equipment | |
| Validation of dynamic power control and exposure time-averaging algorithms Part 1: Cellular network implementations for SAR at frequencies up to 6 GHz | |
| Virtual reality equipment and systems - Market, technology and standards requirements | |
| Water cooling systems for power electronics used in electrical transmission and distribution systems | |
| Wearable electronic devices and technologies Part 250-1: Electronic textile - Snap fastener connectors between e-textiles and detachable electronic devices | |
| Wind energy generation systems Part 11-2: Acoustic noise measurement techniques \x97 Measurement of wind turbine sound characteristics in receptor position | |
| Wind energy generation systems Part 21-4: Measurement and assessment of electrical characteristics \x97 Wind turbine components and subsystems | |
| Wind energy generation systems Part 25-71: Communications for monitoring and control of wind power plants \x97 Configuration description language | |
| Wind energy generation systems Part 26-3: Availability for wind power stations | |
| Wind energy generation systems Part 26-4: Reliability for wind energy generation systems | |
| Wind energy generation systems Part 28: Through-life management and life extension of wind power assets | |
| Wind energy generation systems Part 3-2: Design requirements for floating offshore wind turbines | |
| Wind energy generation systems Part 30: Safety of wind turbine generators \x97 General principles for design | |
| Wind energy generation systems Part 31: Siting risk assessment | |
| Wind energy generation systems Part 50-4: Use of floating lidar systems for wind measurements | |
| Wind energy generation systems Part 9: Probabilistic design measures for wind turbines | |
| Wind turbines Part 26-2: Production-based availability for wind turbines |
| << Prev | Next >> |